systemd Developer Lennart Poettering lennart@poettering.net systemd-run 1 systemd-run Run programs in transient scope units, service units, or timer-scheduled service units systemd-run OPTIONS COMMAND ARGS systemd-run OPTIONS TIMER OPTIONS COMMAND ARGS systemd-run may be used to create and start a transient .service or .scope unit and run the specified COMMAND in it. It may also be used to create and start a transient .timer unit, that activates a .service unit when elapsing. If a command is run as transient service unit, it will be started and managed by the service manager like any other service, and thus shows up in the output of systemctl list-units like any other unit. It will run in a clean and detached execution environment, with the service manager as its parent process. In this mode, systemd-run will start the service asynchronously in the background and return after the command has begun execution (unless --no-block or --wait are specified, see below). If a command is run as transient scope unit, it will be executed by systemd-run itself as parent process and will thus inherit the execution environment of the caller. However, the processes of the command are managed by the service manager similar to normal services, and will show up in the output of systemctl list-units. Execution in this case is synchronous, and will return only when the command finishes. This mode is enabled via the --scope switch (see below). If a command is run with timer options such as --on-calendar= (see below), a transient timer unit is created alongside the service unit for the specified command. Only the transient timer unit is started immediately, the transient service unit will be started when the timer elapses. If the --unit= option is specified, the COMMAND may be omitted. In this case, systemd-run creates only a .timer unit that invokes the specified unit when elapsing. The following options are understood: --no-ask-password Do not query the user for authentication for privileged operations. --scope Create a transient .scope unit instead of the default transient .service unit (see above). --unit= Use this unit name instead of an automatically generated one. --property= -p Sets a property on the scope or service unit that is created. This option takes an assignment in the same format as systemctl1's set-property command. --description= Provide a description for the service, scope or timer unit. If not specified, the command itself will be used as a description. See Description= in systemd.unit5. --slice= Make the new .service or .scope unit part of the specified slice, instead of system.slice. --remain-after-exit After the service process has terminated, keep the service around until it is explicitly stopped. This is useful to collect runtime information about the service after it finished running. Also see RemainAfterExit= in systemd.service5. --send-sighup When terminating the scope or service unit, send a SIGHUP immediately after SIGTERM. This is useful to indicate to shells and shell-like processes that the connection has been severed. Also see SendSIGHUP= in systemd.kill5. --service-type= Sets the service type. Also see Type= in systemd.service5. This option has no effect in conjunction with --scope. Defaults to simple. --uid= --gid= Runs the service process under the specified UNIX user and group. Also see User= and Group= in systemd.exec5. --nice= Runs the service process with the specified nice level. Also see Nice= in systemd.exec5. -E NAME=VALUE --setenv=NAME=VALUE Runs the service process with the specified environment variable set. Also see Environment= in systemd.exec5. --pty -t When invoking the command, the transient service connects its standard input and output to the terminal systemd-run is invoked on, via a pseudo TTY device. This allows running binaries that expect interactive user input as services, such as interactive command shells. Note that machinectl1's shell command is usually a better alternative for requesting a new, interactive login session on the local host or a local container. --quiet -q Suppresses additional informational output while running. This is particularly useful in combination with --pty when it will suppress the initial message explaining how to terminate the TTY connection. --on-active= --on-boot= --on-startup= --on-unit-active= --on-unit-inactive= Defines a monotonic timer relative to different starting points for starting the specified command. See OnActiveSec=, OnBootSec=, OnStartupSec=, OnUnitActiveSec= and OnUnitInactiveSec= in systemd.timer5 for details. These options may not be combined with --scope or --pty. --on-calendar= Defines a calendar timer for starting the specified command. See OnCalendar= in systemd.timer5. This option may not be combined with --scope or --pty. --timer-property= Sets a property on the timer unit that is created. This option is similar to --property= but applies to the transient timer unit rather than the transient service unit created. This option only has an effect in conjunction with --on-active=, --on-boot=, --on-startup=, --on-unit-active=, --on-unit-inactive= or --on-calendar=. This option takes an assignment in the same format as systemctl1's set-property command. --no-block Do not synchronously wait for the unit start operation to finish. If this option is not specified, the start request for the transient unit will be verified, enqueued and systemd-run will wait until the unit's start-up is completed. By passing this argument, it is only verified and enqueued. This option may not be combined with --wait. --wait Synchronously wait for the transient service to terminate. If this option is specified, the start request for the transient unit is verified, enqueued, and waited for. Subsequently the invoked unit is monitored, and it is waited until it is deactivated again (most likely because the specified command completed). On exit, terse information about the unit's runtime is shown, including total runtime (as well as CPU usage, if --property=CPUAccounting=1 was set) and the exit code and status of the main process. This output may be suppressed with --quiet. This option may not be combined with --no-block, --scope or the various timer options. All command line arguments after the first non-option argument become part of the command line of the launched process. If a command is run as service unit, its first argument needs to be an absolute binary path. On success, 0 is returned, a non-zero failure code otherwise. # systemd-run env Running as unit: run-19945.service # journalctl -u run-19945.service Sep 08 07:37:21 bupkis systemd[1]: Starting /usr/bin/env... Sep 08 07:37:21 bupkis systemd[1]: Started /usr/bin/env. Sep 08 07:37:21 bupkis env[19948]: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin Sep 08 07:37:21 bupkis env[19948]: LANG=en_US.UTF-8 Sep 08 07:37:21 bupkis env[19948]: BOOT_IMAGE=/vmlinuz-3.11.0-0.rc5.git6.2.fc20.x86_64 # systemd-run -p BlockIOWeight=10 updatedb This command invokes the updatedb8 tool, but lowers the block I/O weight for it to 10. See systemd.resource-control5 for more information on the BlockIOWeight= property. The following command will touch a file after 30 seconds. # date; systemd-run --on-active=30 --timer-property=AccuracySec=100ms /bin/touch /tmp/foo Mon Dec 8 20:44:24 KST 2014 Running as unit: run-71.timer Will run service as unit: run-71.service # journalctl -b -u run-71.timer -- Logs begin at Fri 2014-12-05 19:09:21 KST, end at Mon 2014-12-08 20:44:54 KST. -- Dec 08 20:44:38 container systemd[1]: Starting /bin/touch /tmp/foo. Dec 08 20:44:38 container systemd[1]: Started /bin/touch /tmp/foo. # journalctl -b -u run-71.service -- Logs begin at Fri 2014-12-05 19:09:21 KST, end at Mon 2014-12-08 20:44:54 KST. -- Dec 08 20:44:48 container systemd[1]: Starting /bin/touch /tmp/foo... Dec 08 20:44:48 container systemd[1]: Started /bin/touch /tmp/foo. The following command invokes /bin/bash as a service passing its standard input, output and error to the calling TTY. # systemd-run -t --send-sighup /bin/bash $ systemd-run --scope --user screen Running scope as unit run-r14b0047ab6df45bfb45e7786cc839e76.scope. $ screen -ls There is a screen on: 492..laptop (Detached) 1 Socket in /var/run/screen/S-fatima. This starts the screen process as a child of the systemd --user process that was started by user@.service, in a scope unit. A systemd.scope5 unit is used instead of a systemd.service5 unit, because screen will exit when detaching from the terminal, and a service unit would be terminated. Running screen as a user unit has the advantage that it is not part of the session scope. If KillUserProcesses=yes is configured in logind.conf5, the default, the session scope will be terminated when the user logs out of that session. The user@.service is started automatically when the user first logs in, and stays around as long as at least one login session is open. After the user logs out of the last session, user@.service and all services underneath it are terminated. This behavior is the default, when "lingering" is not enabled for that user. Enabling lingering means that user@.service is started automatically during boot, even if the user is not logged in, and that the service is not terminated when the user logs out. Enabling lingering allows the user to run processes without being logged in, for example to allow screen to persist after the user logs out, even if the session scope is terminated. In the default configuration, users can enable lingering for themselves: $ loginctl enable-linger systemd1, systemctl1, systemd.unit5, systemd.service5, systemd.scope5, systemd.slice5, systemd.exec5, systemd.resource-control5, systemd.timer5, systemd-mount1, machinectl1