systemd systemd.link 5 systemd.link Network device configuration link.link A plain ini-style text file that encodes configuration for matching network devices, used by systemd-udevd8 and in particular its net_setup_link builtin. See systemd.syntax7 for a general description of the syntax. The .link files are read from the files located in the system network directory /usr/lib/systemd/network and /usr/local/lib/systemd/network, the volatile runtime network directory /run/systemd/network, and the local administration network directory /etc/systemd/network. All configuration files are collectively sorted and processed in alphanumeric order, regardless of the directories in which they live. However, files with identical filenames replace each other. It is recommended that each filename is prefixed with a number smaller than 70 (e.g. 10-eth0.link). Otherwise, the default .link files or those generated by systemd-network-generator.service8 may take precedence over user configured files. Files in /etc/ have the highest priority, files in /run/ take precedence over files with the same name in /usr/lib/. This can be used to override a system-supplied link file with a local file if needed. As a special case, an empty file (file size 0) or symlink with the same name pointing to /dev/null disables the configuration file entirely (it is "masked"). Along with the link file foo.link, a "drop-in" directory foo.link.d/ may exist. All files with the suffix .conf from this directory will be merged in the alphanumeric order and parsed after the main file itself has been parsed. This is useful to alter or add configuration settings, without having to modify the main configuration file. Each drop-in file must have appropriate section headers. In addition to /etc/systemd/network, drop-in .d directories can be placed in /usr/lib/systemd/network or /run/systemd/network directories. Drop-in files in /etc/ take precedence over those in /run/ which in turn take precedence over those in /usr/lib/. Drop-in files under any of these directories take precedence over the main link file wherever located. The link file contains a [Match] section, which determines if a given link file may be applied to a given device, as well as a [Link] section specifying how the device should be configured. The first (in lexical order) of the link files that matches a given device is applied. Note that a default file 99-default.link is shipped by the system. Any user-supplied .link should hence have a lexically earlier name to be considered at all. See udevadm8 for diagnosing problems with .link files. A link file is said to match an interface if all matches specified by the [Match] section are satisfied. When a link file does not contain valid settings in [Match] section, then the file will match all interfaces and systemd-udevd warns about that. Hint: to avoid the warning and to make it clear that all interfaces shall be matched, add the following: OriginalName=* The first (in alphanumeric order) of the link files that matches a given interface is applied, all later files are ignored, even if they match as well. The following keys are accepted: MACAddress= A whitespace-separated list of hardware addresses. The acceptable formats are: colon-delimited hexadecimal Each field must be one byte. E.g. 12:34:56:78:90:ab or AA:BB:CC:DD:EE:FF. hyphen-delimited hexadecimal Each field must be one byte. E.g. 12-34-56-78-90-ab or AA-BB-CC-DD-EE-FF. dot-delimited hexadecimal Each field must be two bytes. E.g. 1234.5678.90ab or AABB.CCDD.EEFF. IPv4 address format E.g. 127.0.0.1 or 192.168.0.1. IPv6 address format E.g. 2001:0db8:85a3::8a2e:0370:7334 or ::1. The total length of each MAC address must be 4 (for IPv4 tunnel), 6 (for Ethernet), 16 (for IPv6 tunnel), or 20 (for InfiniBand). This option may appear more than once, in which case the lists are merged. If the empty string is assigned to this option, the list of hardware addresses defined prior to this is reset. Defaults to unset. PermanentMACAddress= A whitespace-separated list of hardware's permanent addresses. While MACAddress= matches the device's current MAC address, this matches the device's permanent MAC address, which may be different from the current one. Use full colon-, hyphen- or dot-delimited hexadecimal, or IPv4 or IPv6 address format. This option may appear more than once, in which case the lists are merged. If the empty string is assigned to this option, the list of hardware addresses defined prior to this is reset. Defaults to unset. Path= A whitespace-separated list of shell-style globs matching the persistent path, as exposed by the udev property ID_PATH. Driver= A whitespace-separated list of shell-style globs matching the driver currently bound to the device, as exposed by the udev property ID_NET_DRIVER of its parent device, or if that is not set, the driver as exposed by ethtool -i of the device itself. If the list is prefixed with a "!", the test is inverted. Type= A whitespace-separated list of shell-style globs matching the device type, as exposed by networkctl list. If the list is prefixed with a "!", the test is inverted. Some valid values are ether, loopback, wlan, wwan. Valid types are named either from the udev DEVTYPE attribute, or ARPHRD_ macros in linux/if_arp.h, so this is not comprehensive. Kind= A whitespace-separated list of shell-style globs matching the device kind, as exposed by networkctl status INTERFACE or ip -d link show INTERFACE. If the list is prefixed with a "!", the test is inverted. Some valid values are bond, bridge, gre, tun, veth. Valid kinds are given by netlink's IFLA_INFO_KIND attribute, so this is not comprehensive. Property= A whitespace-separated list of udev property names with their values after equals sign (=). If multiple properties are specified, the test results are ANDed. If the list is prefixed with a "!", the test is inverted. If a value contains white spaces, then please quote whole key and value pair. If a value contains quotation, then please escape the quotation with \. Example: if a .link file has the following: Property=ID_MODEL_ID=9999 "ID_VENDOR_FROM_DATABASE=vendor name" "KEY=with \"quotation\"" then, the .link file matches only when an interface has all the above three properties. OriginalName= A whitespace-separated list of shell-style globs matching the device name, as exposed by the udev property "INTERFACE". This cannot be used to match on names that have already been changed from userspace. Caution is advised when matching on kernel-assigned names, as they are known to be unstable between reboots. Host= Matches against the hostname or machine ID of the host. See ConditionHost= in systemd.unit5 for details. When prefixed with an exclamation mark (!), the result is negated. If an empty string is assigned, the previously assigned value is cleared. Virtualization= Checks whether the system is executed in a virtualized environment and optionally test whether it is a specific implementation. See ConditionVirtualization= in systemd.unit5 for details. When prefixed with an exclamation mark (!), the result is negated. If an empty string is assigned, the previously assigned value is cleared. KernelCommandLine= Checks whether a specific kernel command line option is set. See ConditionKernelCommandLine= in systemd.unit5 for details. When prefixed with an exclamation mark (!), the result is negated. If an empty string is assigned, the previously assigned value is cleared. KernelVersion= Checks whether the kernel version (as reported by uname -r) matches a certain expression. See ConditionKernelVersion= in systemd.unit5 for details. When prefixed with an exclamation mark (!), the result is negated. If an empty string is assigned, the previously assigned value is cleared. Credential= Checks whether the specified credential was passed to the systemd-udevd.service service. See System and Service Credentials for details. When prefixed with an exclamation mark (!), the result is negated. If an empty string is assigned, the previously assigned value is cleared. Architecture= Checks whether the system is running on a specific architecture. See ConditionArchitecture= in systemd.unit5 for details. When prefixed with an exclamation mark (!), the result is negated. If an empty string is assigned, the previously assigned value is cleared. Firmware= Checks whether the system is running on a machine with the specified firmware. See ConditionFirmware= in systemd.unit5 for details. When prefixed with an exclamation mark (!), the result is negated. If an empty string is assigned, the previously assigned value is cleared. The [Link] section accepts the following keys: Description= A description of the device. Property= Set specified udev properties. This takes space separated list of key-value pairs concatenated with equal sign (=). Example: Property=HOGE=foo BAR=baz This option supports simple specifier expansion, see the Specifiers section below. This option can be specified multiple times. If an empty string is assigned, then the all previous assignments are cleared. This setting is useful to configure the ID_NET_MANAGED_BY= property which declares which network management service shall manage the interface, which is respected by systemd-networkd and others. Use Property=ID_NET_MANAGED_BY=io.systemd.Network to declare explicitly that systemd-networkd shall manage the interface, or set the property to something else to declare explicitly it shall not do so. See systemd.network5 for details how this property is used to match interface names. ImportProperty= Import specified udev properties from the saved database. This takes space separated list of property names. Example: ImportProperty=HOGE BAR This option supports simple specifier expansion, see the Specifiers section below. This option can be specified multiple times. If an empty string is assigned, then the all previous assignments are cleared. If the same property is also set in Property= in the above, then the imported property value will be overridden by the value specified in Property=. UnsetProperty= Unset specified udev properties. This takes space separated list of property names. Example: ImportProperty=HOGE BAR This option supports simple specifier expansion, see the Specifiers section below. This option can be specified multiple times. If an empty string is assigned, then the all previous assignments are cleared. This setting is applied after ImportProperty= and Property= are applied. Hence, if the same property is specified in ImportProperty= or Property=, then the imported or specified property value will be ignored, and the property will be unset. Alias= The ifalias interface property is set to this value. MACAddressPolicy= The policy by which the MAC address should be set. The available policies are: persistent If the hardware has a persistent MAC address, as most hardware should, and if it is used by the kernel, nothing is done. Otherwise, a new MAC address is generated which is guaranteed to be the same on every boot for the given machine and the given device, but which is otherwise random. This feature depends on ID_NET_NAME_* properties to exist for the link. On hardware where these properties are not set, the generation of a persistent MAC address will fail. random If the kernel is using a random MAC address, nothing is done. Otherwise, a new address is randomly generated each time the device appears, typically at boot. Either way, the random address will have the unicast and locally administered bits set. none Keeps the MAC address assigned by the kernel. Or use the MAC address specified in MACAddress=. An empty string assignment is equivalent to setting none. MACAddress= The interface MAC address to use. For this setting to take effect, MACAddressPolicy= must either be unset, empty, or none. NamePolicy= An ordered, space-separated list of policies by which the interface name should be set. NamePolicy= may be disabled by specifying net.ifnames=0 on the kernel command line. Each of the policies may fail, and the first successful one is used. The name is not set directly, but is exported to udev as the property ID_NET_NAME, which is, by default, used by a udev7, rule to set NAME. The available policies are: kernel If the kernel claims that the name it has set for a device is predictable, then no renaming is performed. database The name is set based on entries in the udev's Hardware Database with the key ID_NET_NAME_FROM_DATABASE. onboard The name is set based on information given by the firmware for on-board devices, as exported by the udev property ID_NET_NAME_ONBOARD. See systemd.net-naming-scheme7. slot The name is set based on information given by the firmware for hot-plug devices, as exported by the udev property ID_NET_NAME_SLOT. See systemd.net-naming-scheme7. path The name is set based on the device's physical location, as exported by the udev property ID_NET_NAME_PATH. See systemd.net-naming-scheme7. mac The name is set based on the device's persistent MAC address, as exported by the udev property ID_NET_NAME_MAC. See systemd.net-naming-scheme7. keep If the device already had a name given by userspace (as part of creation of the device or a rename), keep it. Name= The interface name to use. This option has lower precedence than NamePolicy=, so for this setting to take effect, NamePolicy= must either be unset, empty, disabled, or all policies configured there must fail. Also see the example below with Name=dmz0. Note that specifying a name that the kernel might use for another interface (for example eth0) is dangerous because the name assignment done by udev will race with the assignment done by the kernel, and only one interface may use the name. Depending on the order of operations, either udev or the kernel will win, making the naming unpredictable. It is best to use some different prefix, for example internal0/external0 or lan0/lan1/lan3. Interface names must have a minimum length of 1 character and a maximum length of 15 characters, and may contain any 7bit ASCII character, with the exception of control characters, :, / and %. While . is an allowed character, it's recommended to avoid it when naming interfaces as various tools (such as resolvconf1) use it as separator character. Also, fully numeric interface names are not allowed (in order to avoid ambiguity with interface specification by numeric indexes), as are the special strings ., .., all and default. AlternativeNamesPolicy= A space-separated list of policies by which the interface's alternative names should be set. Each of the policies may fail, and all successful policies are used. The available policies are database, onboard, slot, path, and mac. If the kernel does not support the alternative names, then this setting will be ignored. AlternativeName= The alternative interface name to use. This option can be specified multiple times. If the empty string is assigned to this option, the list is reset, and all prior assignments have no effect. If the kernel does not support the alternative names, then this setting will be ignored. Alternative interface names may be used to identify interfaces in various tools. In contrast to the primary name (as configured with Name= above) there may be multiple alternative names referring to the same interface. Alternative names may have a maximum length of 127 characters, in contrast to the 15 allowed for the primary interface name, but otherwise are subject to the same naming constraints. TransmitQueues= Specifies the device's number of transmit queues. An integer in the range 1…4096. When unset, the kernel's default will be used. ReceiveQueues= Specifies the device's number of receive queues. An integer in the range 1…4096. When unset, the kernel's default will be used. TransmitQueueLength= Specifies the transmit queue length of the device in number of packets. An unsigned integer in the range 0…4294967294. When unset, the kernel's default will be used. MTUBytes= The maximum transmission unit in bytes to set for the device. The usual suffixes K, M, G are supported and are understood to the base of 1024. BitsPerSecond= The speed to set for the device, the value is rounded down to the nearest Mbps. The usual suffixes K, M, G are supported and are understood to the base of 1000. Duplex= The duplex mode to set for the device. The accepted values are half and full. AutoNegotiation= Takes a boolean. If set to yes, automatic negotiation of transmission parameters is enabled. Autonegotiation is a procedure by which two connected ethernet devices choose common transmission parameters, such as speed, duplex mode, and flow control. When unset, the kernel's default will be used. Note that if autonegotiation is enabled, speed and duplex settings are read-only. If autonegotiation is disabled, speed and duplex settings are writable if the driver supports multiple link modes. WakeOnLan= The Wake-on-LAN policy to set for the device. Takes the special value off which disables Wake-on-LAN, or space separated list of the following words: phy Wake on PHY activity. unicast Wake on unicast messages. multicast Wake on multicast messages. broadcast Wake on broadcast messages. arp Wake on ARP. magic Wake on receipt of a magic packet. secureon Enable SecureOn password for MagicPacket. Implied when WakeOnLanPassword= is specified. If specified without WakeOnLanPassword= option, then the password is read from the credential LINK.link.wol.password (e.g., 60-foo.link.wol.password), and if the credential not found, then read from wol.password. See ImportCredential=/LoadCredential=/SetCredential= in systemd.exec5 for details. The password in the credential, must be 6 bytes in hex format with each byte separated by a colon (:) like an Ethernet MAC address, e.g., aa:bb:cc:dd:ee:ff. Defaults to unset, and the device's default will be used. This setting can be specified multiple times. If an empty string is assigned, then the all previous assignments are cleared. WakeOnLanPassword= Specifies the SecureOn password for MagicPacket. Takes an absolute path to a regular file or an AF_UNIX stream socket, or the plain password. When a path to a regular file is specified, the password is read from it. When an AF_UNIX stream socket is specified, a connection is made to it and the password is read from it. The password must be 6 bytes in hex format with each byte separated by a colon (:) like an Ethernet MAC address, e.g., aa:bb:cc:dd:ee:ff. This implies WakeOnLan=secureon. Defaults to unset, and the current value will not be changed. Port= The port option is used to select the device port. The supported values are: tp An Ethernet interface using Twisted-Pair cable as the medium. aui Attachment Unit Interface (AUI). Normally used with hubs. bnc An Ethernet interface using BNC connectors and co-axial cable. mii An Ethernet interface using a Media Independent Interface (MII). fibre An Ethernet interface using Optical Fibre as the medium. Advertise= This sets what speeds and duplex modes of operation are advertised for auto-negotiation. This implies AutoNegotiation=yes. The supported values are: Advertise Speed (Mbps) Duplex Mode By default this is unset, i.e. all possible modes will be advertised. This option may be specified more than once, in which case all specified speeds and modes are advertised. If the empty string is assigned to this option, the list is reset, and all prior assignments have no effect. ReceiveChecksumOffload= Takes a boolean. If set to true, hardware offload for checksumming of ingress network packets is enabled. When unset, the kernel's default will be used. TransmitChecksumOffload= Takes a boolean. If set to true, hardware offload for checksumming of egress network packets is enabled. When unset, the kernel's default will be used. TCPSegmentationOffload= Takes a boolean. If set to true, TCP Segmentation Offload (TSO) is enabled. When unset, the kernel's default will be used. TCP6SegmentationOffload= Takes a boolean. If set to true, TCP6 Segmentation Offload (tx-tcp6-segmentation) is enabled. When unset, the kernel's default will be used. GenericSegmentationOffload= Takes a boolean. If set to true, Generic Segmentation Offload (GSO) is enabled. When unset, the kernel's default will be used. GenericReceiveOffload= Takes a boolean. If set to true, Generic Receive Offload (GRO) is enabled. When unset, the kernel's default will be used. GenericReceiveOffloadHardware= Takes a boolean. If set to true, hardware accelerated Generic Receive Offload (GRO) is enabled. When unset, the kernel's default will be used. LargeReceiveOffload= Takes a boolean. If set to true, Large Receive Offload (LRO) is enabled. When unset, the kernel's default will be used. ReceivePacketSteeringCPUMask= Configures Receive Packet Steering (RPS) list of CPUs to which RPS may forward traffic. Takes a list of CPU indices or ranges separated by either whitespace or commas. Alternatively, takes the special value all in which will include all available CPUs in the mask. CPU ranges are specified by the lower and upper CPU indices separated by a dash (e.g. 2-6). This option may be specified more than once, in which case the specified CPU affinity masks are merged. If an empty string is assigned, the mask is reset, all assignments prior to this will have no effect. Defaults to unset and RPS CPU list is unchanged. To disable RPS when it was previously enabled, use the special value disable. ReceiveVLANCTAGHardwareAcceleration= Takes a boolean. If set to true, receive VLAN CTAG hardware acceleration is enabled. When unset, the kernel's default will be used. TransmitVLANCTAGHardwareAcceleration= Takes a boolean. If set to true, transmit VLAN CTAG hardware acceleration is enabled. When unset, the kernel's default will be used. ReceiveVLANCTAGFilter= Takes a boolean. If set to true, receive filtering on VLAN CTAGs is enabled. When unset, the kernel's default will be used. TransmitVLANSTAGHardwareAcceleration= Takes a boolean. If set to true, transmit VLAN STAG hardware acceleration is enabled. When unset, the kernel's default will be used. NTupleFilter= Takes a boolean. If set to true, receive N-tuple filters and actions are enabled. When unset, the kernel's default will be used. RxChannels= TxChannels= OtherChannels= CombinedChannels= Specifies the number of receive, transmit, other, or combined channels, respectively. Takes an unsigned integer in the range 1…4294967295 or max. If set to max, the advertised maximum value of the hardware will be used. When unset, the number will not be changed. Defaults to unset. RxBufferSize= RxMiniBufferSize= RxJumboBufferSize= TxBufferSize= Specifies the maximum number of pending packets in the NIC receive buffer, mini receive buffer, jumbo receive buffer, or transmit buffer, respectively. Takes an unsigned integer in the range 1…4294967295 or max. If set to max, the advertised maximum value of the hardware will be used. When unset, the number will not be changed. Defaults to unset. RxFlowControl= Takes a boolean. When set, enables receive flow control, also known as the ethernet receive PAUSE message (generate and send ethernet PAUSE frames). When unset, the kernel's default will be used. TxFlowControl= Takes a boolean. When set, enables transmit flow control, also known as the ethernet transmit PAUSE message (respond to received ethernet PAUSE frames). When unset, the kernel's default will be used. AutoNegotiationFlowControl= Takes a boolean. When set, auto negotiation enables the interface to exchange state advertisements with the connected peer so that the two devices can agree on the ethernet PAUSE configuration. When unset, the kernel's default will be used. GenericSegmentOffloadMaxBytes= Specifies the maximum size of a Generic Segment Offload (GSO) packet the device should accept. The usual suffixes K, M, G are supported and are understood to the base of 1024. An unsigned integer in the range 1…65536. Defaults to unset. GenericSegmentOffloadMaxSegments= Specifies the maximum number of Generic Segment Offload (GSO) segments the device should accept. An unsigned integer in the range 1…65535. Defaults to unset. UseAdaptiveRxCoalesce= UseAdaptiveTxCoalesce= Boolean properties that, when set, enable/disable adaptive Rx/Tx coalescing if the hardware supports it. When unset, the kernel's default will be used. RxCoalesceSec= RxCoalesceIrqSec= RxCoalesceLowSec= RxCoalesceHighSec= TxCoalesceSec= TxCoalesceIrqSec= TxCoalesceLowSec= TxCoalesceHighSec= These properties configure the delay before Rx/Tx interrupts are generated after a packet is sent/received. The Irq properties come into effect when the host is servicing an IRQ. The Low and High properties come into effect when the packet rate drops below the low packet rate threshold or exceeds the high packet rate threshold respectively if adaptive Rx/Tx coalescing is enabled. When unset, the kernel's defaults will be used. RxMaxCoalescedFrames= RxMaxCoalescedIrqFrames= RxMaxCoalescedLowFrames= RxMaxCoalescedHighFrames= TxMaxCoalescedFrames= TxMaxCoalescedIrqFrames= TxMaxCoalescedLowFrames= TxMaxCoalescedHighFrames= These properties configure the maximum number of frames that are sent/received before a Rx/Tx interrupt is generated. The Irq properties come into effect when the host is servicing an IRQ. The Low and High properties come into effect when the packet rate drops below the low packet rate threshold or exceeds the high packet rate threshold respectively if adaptive Rx/Tx coalescing is enabled. When unset, the kernel's defaults will be used. CoalescePacketRateLow= CoalescePacketRateHigh= These properties configure the low and high packet rate (expressed in packets per second) threshold respectively and are used to determine when the corresponding coalescing settings for low and high packet rates come into effect if adaptive Rx/Tx coalescing is enabled. If unset, the kernel's defaults will be used. CoalescePacketRateSampleIntervalSec= Configures how often to sample the packet rate used for adaptive Rx/Tx coalescing. This property cannot be zero. This lowest time granularity supported by this property is seconds. Partial seconds will be rounded up before being passed to the kernel. If unset, the kernel's default will be used. StatisticsBlockCoalesceSec= How long to delay driver in-memory statistics block updates. If the driver does not have an in-memory statistic block, this property is ignored. This property cannot be zero. If unset, the kernel's default will be used. MDI= Specifies the medium dependent interface (MDI) mode for the interface. A MDI describes the interface from a physical layer implementation to the physical medium used to carry the transmission. Takes one of the following words: straight (or equivalently: mdi), crossover (or equivalently: mdi-x, mdix), and auto. When straight, the MDI straight through mode will be used. When crossover, the MDI crossover (MDI-X) mode will be used. When auto, the MDI status is automatically detected. Defaults to unset, and the kernel's default will be used. SR-IOVVirtualFunctions= Specifies the number of SR-IOV virtual functions. Takes an integer in the range 0…2147483647. Defaults to unset, and automatically determined from the values specified in the VirtualFunction= settings in the [SR-IOV] sections. The [SR-IOV] section accepts the following keys. Specify several [SR-IOV] sections to configure several SR-IOVs. SR-IOV provides the ability to partition a single physical PCI resource into virtual PCI functions which can then be injected into a VM. In the case of network VFs, SR-IOV improves north-south network performance (that is, traffic with endpoints outside the host machine) by allowing traffic to bypass the host machine’s network stack. VirtualFunction= Specifies a Virtual Function (VF), lightweight PCIe function designed solely to move data in and out. Takes an integer in the range 0…2147483646. This option is compulsory. VLANId= Specifies VLAN ID of the virtual function. Takes an integer in the range 1…4095. QualityOfService= Specifies quality of service of the virtual function. Takes an integer in the range 1…4294967294. VLANProtocol= Specifies VLAN protocol of the virtual function. Takes 802.1Q or 802.1ad. MACSpoofCheck= Takes a boolean. Controls the MAC spoof checking. When unset, the kernel's default will be used. QueryReceiveSideScaling= Takes a boolean. Toggle the ability of querying the receive side scaling (RSS) configuration of the virtual function (VF). The VF RSS information like RSS hash key may be considered sensitive on some devices where this information is shared between VF and the physical function (PF). When unset, the kernel's default will be used. Trust= Takes a boolean. Allows one to set trust mode of the virtual function (VF). When set, VF users can set a specific feature which may impact security and/or performance. When unset, the kernel's default will be used. LinkState= Allows one to set the link state of the virtual function (VF). Takes a boolean or a special value auto. Setting to auto means a reflection of the physical function (PF) link state, yes lets the VF to communicate with other VFs on this host even if the PF link state is down, no causes the hardware to drop any packets sent by the VF. When unset, the kernel's default will be used. MACAddress= Specifies the MAC address for the virtual function. Some settings resolve specifiers which may be used to write generic unit files referring to runtime or unit parameters that are replaced when the unit files are loaded. Specifiers must be known and resolvable for the setting to be valid. The following specifiers are understood: Specifier Meaning Details The link file 99-default.link that is shipped with systemd defines the default policies for the interface name, alternative names, and MAC address of links. [Match] OriginalName=* [Link] NamePolicy=keep kernel database onboard slot path AlternativeNamesPolicy=database onboard slot path MACAddressPolicy=persistent This example assigns the fixed name dmz0 to the interface with the MAC address 00:a0:de:63:7a:e6: [Match] MACAddress=00:a0:de:63:7a:e6 [Link] Name=dmz0 NamePolicy= is not set, so Name= takes effect. We use the 10- prefix to order this file early in the list. Note that it needs to be before 99-default.link, i.e. it needs a numerical prefix, to have any effect at all. After a new .link file has been created, or an existing .link file modified, the new settings may be applied to the matching interface with the following commands: $ sudo udevadm control --reload $ sudo ip link set eth0 down $ sudo udevadm trigger --verbose --settle --action add /sys/class/net/eth0 You may also need to stop the service that manages the network interface, e.g. systemd-networkd.service8 or NetworkManager.service before the above operation, and then restart the service after that. For more details about udevadm command, see udevadm8. $ sudo SYSTEMD_LOG_LEVEL=debug udevadm test-builtin net_setup_link /sys/class/net/hub0 … Parsed configuration file /usr/lib/systemd/network/99-default.link Parsed configuration file /etc/systemd/network/10-eth0.link ID_NET_DRIVER=cdc_ether Config file /etc/systemd/network/10-eth0.link applies to device hub0 link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. hub0: Device has name_assign_type=4 Using default interface naming scheme 'v240'. hub0: Policies didn't yield a name, using specified Name=hub0. ID_NET_LINK_FILE=/etc/systemd/network/10-eth0.link ID_NET_NAME=hub0 … Explicit Name= configuration wins in this case. sudo SYSTEMD_LOG_LEVEL=debug udevadm test-builtin net_setup_link /sys/class/net/enp0s31f6 … Parsed configuration file /usr/lib/systemd/network/99-default.link Parsed configuration file /etc/systemd/network/10-eth0.link Created link configuration context. ID_NET_DRIVER=e1000e Config file /usr/lib/systemd/network/99-default.link applies to device enp0s31f6 link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. enp0s31f6: Device has name_assign_type=4 Using default interface naming scheme 'v240'. enp0s31f6: Policy *keep*: keeping existing userspace name enp0s31f6: Device has addr_assign_type=0 enp0s31f6: MAC on the device already matches policy *persistent* ID_NET_LINK_FILE=/usr/lib/systemd/network/99-default.link … In this case, the interface was already renamed, so the keep policy specified as the first option in 99-default.link means that the existing name is preserved. If keep was removed, or if were in boot before the renaming has happened, we might get the following instead: enp0s31f6: Policy *path* yields "enp0s31f6". enp0s31f6: Device has addr_assign_type=0 enp0s31f6: MAC on the device already matches policy *persistent* ID_NET_LINK_FILE=/usr/lib/systemd/network/99-default.link ID_NET_NAME=enp0s31f6 … Please note that the details of output are subject to change. This example assigns the fixed name internet0 to the interface with the device path pci-0000:00:1a.0-*: [Match] Path=pci-0000:00:1a.0-* [Link] Name=internet0 Here's an overly complex example that shows the use of a large number of [Match] and [Link] settings. [Match] MACAddress=12:34:56:78:9a:bc Driver=brcmsmac Path=pci-0000:02:00.0-* Type=wlan Virtualization=no Host=my-laptop Architecture=x86-64 [Link] Name=wireless0 MTUBytes=1450 BitsPerSecond=10M WakeOnLan=magic MACAddress=cb:a9:87:65:43:21 systemd-udevd.service8 udevadm8 systemd.netdev5 systemd.network5 systemd-network-generator.service8