systemd.mountsystemdsystemd.mount5systemd.mountMount unit configurationmount.mountDescriptionA unit configuration file whose name ends in
.mount encodes information about a file system
mount point controlled and supervised by systemd.This man page lists the configuration options specific to
this unit type. See
systemd.unit5
for the common options of all unit configuration files. The common
configuration items are configured in the generic [Unit] and
[Install] sections. The mount specific configuration options are
configured in the [Mount] section.Additional options are listed in
systemd.exec5,
which define the execution environment the
mount8
program is executed in, and in
systemd.kill5,
which define the way the processes are terminated, and in
systemd.resource-control5,
which configure resource control settings for the processes of the
service.Note that the options User= and
Group= are not useful for mount units.
systemd passes two parameters to
mount8;
the values of What= and Where=.
When invoked in this way,
mount8
does not read any options from /etc/fstab, and
must be run as UID 0.Mount units must be named after the mount point directories they control. Example: the mount point /home/lennart must be configured in a unit file home-lennart.mount.
For details about the escaping logic used to convert a file system path to a unit name, see
systemd.unit5. Note that mount
units cannot be templated, nor is possible to add multiple names to a mount unit by creating additional symlinks to
it.Optionally, a mount unit may be accompanied by an automount
unit, to allow on-demand or parallelized mounting. See
systemd.automount5.Mount points created at runtime (independently of unit files
or /etc/fstab) will be monitored by systemd
and appear like any other mount unit in systemd. See
/proc/self/mountinfo description in
proc5.
Some file systems have special semantics as API file systems
for kernel-to-userspace and userspace-to-userspace interfaces. Some
of them may not be changed via mount units, and cannot be
disabled. For a longer discussion see API
File Systems.Automatic DependenciesImplicit DependenciesThe following dependencies are implicitly added:If a mount unit is beneath another mount unit in the file
system hierarchy, both a requirement dependency and an ordering
dependency between both units are created automatically.Block device backed file systems automatically gain
BindsTo= and After= type
dependencies on the device unit encapsulating the block
device (see below).If traditional file system quota is enabled for a mount
unit, automatic Wants= and
Before= dependencies on
systemd-quotacheck.service and
quotaon.service are added.Additional implicit dependencies may be added as result of
execution and resource control parameters as documented in
systemd.exec5
and
systemd.resource-control5.
Default DependenciesThe following dependencies are added unless DefaultDependencies=no is set:All mount units acquire automatic Before= and Conflicts= on
umount.target in order to be stopped during shutdown.Mount units referring to local file systems automatically gain
an After= dependency on local-fs-pre.target, and a
Before= dependency on local-fs.target unless
mount option is set.Network mount units
automatically acquire After= dependencies on remote-fs-pre.target,
network.target and network-online.target, and gain a
Before= dependency on remote-fs.target unless
mount option is set. Towards the latter a
Wants= unit is added as well.Mount units referring to local and network file systems are distinguished by their file system type
specification. In some cases this is not sufficient (for example network block device based mounts, such as
iSCSI), in which case may be added to the mount option string of the unit, which forces
systemd to consider the mount unit a network mount.<filename>fstab</filename>Mount units may either be configured via unit files, or via
/etc/fstab (see
fstab5
for details). Mounts listed in /etc/fstab
will be converted into native units dynamically at boot and when
the configuration of the system manager is reloaded. In general,
configuring mount points through /etc/fstab
is the preferred approach. See
systemd-fstab-generator8
for details about the conversion.The NFS mount option for NFS background mounts
as documented in nfs5
is detected by systemd-fstab-generator and the options
are transformed so that systemd fulfills the job-control implications of
that option. Specifically systemd-fstab-generator acts
as though x-systemd.mount-timeout=infinity,retry=10000 was
prepended to the option list, and fg,nofail was appended.
Depending on specific requirements, it may be appropriate to provide some of
these options explicitly, or to make use of the
x-systemd.automount option described below instead
of using bg.When reading /etc/fstab a few special
mount options are understood by systemd which influence how
dependencies are created for mount points. systemd will create a
dependency of type Wants= or
(see option
below), from either local-fs.target or
remote-fs.target, depending whether the file
system is local or remote.Configures a Requires= and
an After= dependency between the created
mount unit and another systemd unit, such as a device or mount
unit. The argument should be a unit name, or an absolute path
to a device node or mount point. This option may be specified
more than once. This option is particularly useful for mount
point declarations that need an additional device to be around
(such as an external journal device for journal file systems)
or an additional mount to be in place (such as an overlay file
system that merges multiple mount points). See
After= and Requires= in
systemd.unit5
for details.Configures a Before=
dependency or After= between the created
mount unit and another systemd unit, such as a mount unit.
The argument should be a unit name or an absolute path
to a mount point. This option may be specified more than once.
This option is particularly useful for mount point declarations
with option that are mounted
asynchronously but need to be mounted before or after some unit
start, for example, before local-fs.target
unit.
See Before= and After= in
systemd.unit5
for details.Configures a
RequiresMountsFor= dependency between the
created mount unit and other mount units. The argument must be
an absolute path. This option may be specified more than once.
See RequiresMountsFor= in
systemd.unit5
for details.The block device backed file system will be upgraded
to BindsTo= dependency. This option is only useful
when mounting file systems manually with
mount8
as the default dependency in this case is Requires=.
This option is already implied by entries in /etc/fstab
or by mount units.
An automount unit will be created for the file
system. See
systemd.automount5
for details.Configures the idle timeout of the
automount unit. See TimeoutIdleSec= in
systemd.automount5
for details.Configure how long systemd should wait for a
device to show up before giving up on an entry from
/etc/fstab. Specify a time in seconds or
explicitly append a unit such as s,
min, h,
ms.Note that this option can only be used in
/etc/fstab, and will be
ignored when part of the Options=
setting in a unit file.Configure how long systemd should wait for the
mount command to finish before giving up on an entry from
/etc/fstab. Specify a time in seconds or
explicitly append a unit such as s,
min, h,
ms.Note that this option can only be used in
/etc/fstab, and will be
ignored when part of the Options=
setting in a unit file.See TimeoutSec= below for
details.The file system will be initialized
on the device. If the device is not "empty", i.e. it contains any signature,
the operation will be skipped. It is hence expected that this option
remains set even after the device has been initalized.Note that this option can only be used in
/etc/fstab, and will be ignored when part of the
Options= setting in a unit file.See
systemd-makefs@.service8.
wipefs8
may be used to remove any signatures from a block device to force
to reinitialize the device.The file system will be grown to occupy the full block
device. If the file system is already at maximum size, no action will
be performed. It is hence expected that this option remains set even after
the file system has been grown. Only certain file system types are supported,
see
systemd-makefs@.service8
for details.Note that this option can only be used in
/etc/fstab, and will be ignored when part of the
Options= setting in a unit file.Normally the file system type is used to determine if a
mount is a "network mount", i.e. if it should only be started after the
network is available. Using this option overrides this detection and
specifies that the mount requires network.Network mount units are ordered between remote-fs-pre.target
and remote-fs.target, instead of
local-fs-pre.target and local-fs.target.
They also pull in network-online.target and are ordered after
it and network.target.With , the mount unit will not be added as a dependency for
local-fs.target or remote-fs.target. This means that it will not be
mounted automatically during boot, unless it is pulled in by some other unit. The option
has the opposite meaning and is the default. Note that the option has an effect on the
mount unit itself only — if is used (see above), then the matching
automount unit will still be pulled in by these targets.With , this mount will be only wanted, not required, by
local-fs.target or remote-fs.target. Moreover the mount unit is not
ordered before these target units. This means that the boot will continue without waiting for the mount unit
and regardless whether the mount point can be mounted successfully.An additional filesystem to be mounted in the
initramfs. See initrd-fs.target
description in
systemd.special7.
If a mount point is configured in both
/etc/fstab and a unit file that is stored
below /usr, the former will take precedence.
If the unit file is stored below /etc, it
will take precedence. This means: native unit files take
precedence over traditional configuration files, but this is
superseded by the rule that configuration in
/etc will always take precedence over
configuration in /usr.OptionsMount files must include a [Mount] section, which carries
information about the file system mount points it supervises. A
number of options that may be used in this section are shared with
other unit types. These options are documented in
systemd.exec5
and
systemd.kill5.
The options specific to the [Mount] section of mount units are the
following:What=Takes an absolute path of a device node, file or other resource to mount. See mount8 for details. If
this refers to a device node, a dependency on the respective device unit is automatically created. (See
systemd.device5 for more
information.) This option is mandatory. Note that the usual specifier expansion is applied to this setting,
literal percent characters should hence be written as %%.Where=Takes an absolute path of a directory for the
mount point; in particular, the destination cannot be a symbolic
link. If the mount point does not exist at the time of
mounting, it is created. This string must be reflected in the
unit filename. (See above.) This option is
mandatory.Type=Takes a string for the file system type. See
mount8
for details. This setting is optional.Options=Mount options to use when mounting. This takes a comma-separated list of options. This setting
is optional. Note that the usual specifier expansion is applied to this setting, literal percent characters
should hence be written as %%.SloppyOptions=Takes a boolean argument. If true, parsing of
the options specified in Options= is
relaxed, and unknown mount options are tolerated. This
corresponds with
mount8's
-s switch. Defaults to
off.LazyUnmount=Takes a boolean argument. If true, detach the
filesystem from the filesystem hierarchy at time of the unmount
operation, and clean up all references to the filesystem as
soon as they are not busy anymore.
This corresponds with
umount8's
-l switch. Defaults to
off.ForceUnmount=Takes a boolean argument. If true, force an
unmount (in case of an unreachable NFS system).
This corresponds with
umount8's
-f switch. Defaults to
off.DirectoryMode=Directories of mount points (and any parent
directories) are automatically created if needed. This option
specifies the file system access mode used when creating these
directories. Takes an access mode in octal notation. Defaults
to 0755.TimeoutSec=Configures the time to wait for the mount
command to finish. If a command does not exit within the
configured time, the mount will be considered failed and be
shut down again. All commands still running will be terminated
forcibly via SIGTERM, and after another
delay of this time with SIGKILL. (See
in
systemd.kill5.)
Takes a unit-less value in seconds, or a time span value such
as "5min 20s". Pass 0 to disable the timeout logic. The
default value is set from DefaultTimeoutStartSec= option in
systemd-system.conf5.
Check
systemd.exec5
and
systemd.kill5
for more settings.See Alsosystemd1,
systemctl1,
systemd-system.conf5,
systemd.unit5,
systemd.exec5,
systemd.kill5,
systemd.resource-control5,
systemd.service5,
systemd.device5,
proc5,
mount8,
systemd-fstab-generator8,
systemd.directives7