mirror of
https://github.com/systemd/systemd.git
synced 2024-11-06 08:26:52 +03:00
681eb9cf2b
In particular, use /lib/systemd instead of /usr/lib/systemd in distributions like Debian which still have not adopted a /usr merge setup. Use XML entities from man/custom-entities.ent to replace configured paths while doing XSLT processing of the original XML files. There was precedent of some files (such as systemd.generator.xml) which were already using this approach. This addresses most of the (manual) fixes from this patch: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/patches/Fix-paths-in-man-pages.patch?h=experimental-220 The idea of using generic XML entities was presented here: http://lists.freedesktop.org/archives/systemd-devel/2015-May/032240.html This patch solves almost all the issues, with the exception of: - Path to /bin/mount and /bin/umount. - Generic statements about preference of /lib over /etc. These will be handled separately by follow up patches. Tested: - With default configure settings, ran "make install" to two separate directories and compared the output to confirm they matched exactly. - Used a set of configure flags including $CONFFLAGS from Debian: http://anonscm.debian.org/cgit/pkg-systemd/systemd.git/tree/debian/rules Installed the tree and confirmed the paths use /lib/systemd instead of /usr/lib/systemd and that no other unexpected differences exist. - Confirmed that `make distcheck` still passes.
401 lines
18 KiB
XML
401 lines
18 KiB
XML
<?xml version='1.0'?> <!--*-nxml-*-->
|
|
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
|
|
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
|
|
<!ENTITY % entities SYSTEM "custom-entities.ent" >
|
|
%entities;
|
|
]>
|
|
|
|
<!--
|
|
This file is part of systemd.
|
|
|
|
Copyright 2010 Lennart Poettering
|
|
|
|
systemd is free software; you can redistribute it and/or modify it
|
|
under the terms of the GNU Lesser General Public License as published by
|
|
the Free Software Foundation; either version 2.1 of the License, or
|
|
(at your option) any later version.
|
|
|
|
systemd is distributed in the hope that it will be useful, but
|
|
WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
Lesser General Public License for more details.
|
|
|
|
You should have received a copy of the GNU Lesser General Public License
|
|
along with systemd; If not, see <http://www.gnu.org/licenses/>.
|
|
-->
|
|
|
|
<refentry id="journald.conf"
|
|
xmlns:xi="http://www.w3.org/2001/XInclude">
|
|
<refentryinfo>
|
|
<title>journald.conf</title>
|
|
<productname>systemd</productname>
|
|
|
|
<authorgroup>
|
|
<author>
|
|
<contrib>Developer</contrib>
|
|
<firstname>Lennart</firstname>
|
|
<surname>Poettering</surname>
|
|
<email>lennart@poettering.net</email>
|
|
</author>
|
|
</authorgroup>
|
|
</refentryinfo>
|
|
|
|
<refmeta>
|
|
<refentrytitle>journald.conf</refentrytitle>
|
|
<manvolnum>5</manvolnum>
|
|
</refmeta>
|
|
|
|
<refnamediv>
|
|
<refname>journald.conf</refname>
|
|
<refname>journald.conf.d</refname>
|
|
<refpurpose>Journal service configuration files</refpurpose>
|
|
</refnamediv>
|
|
|
|
<refsynopsisdiv>
|
|
<para><filename>&pkgsysconfdir;/journald.conf</filename></para>
|
|
<para><filename>&pkgsysconfdir;/journald.conf.d/*.conf</filename></para>
|
|
<para><filename>/run/systemd/journald.conf.d/*.conf</filename></para>
|
|
<para><filename>&rootlibexecdir;/journald.conf.d/*.conf</filename></para>
|
|
</refsynopsisdiv>
|
|
|
|
<refsect1>
|
|
<title>Description</title>
|
|
|
|
<para>These files configure various parameters of the systemd
|
|
journal service,
|
|
<citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para>
|
|
|
|
</refsect1>
|
|
|
|
<xi:include href="standard-conf.xml" xpointer="main-conf" />
|
|
|
|
<refsect1>
|
|
<title>Options</title>
|
|
|
|
<para>All options are configured in the
|
|
<literal>[Journal]</literal> section:</para>
|
|
|
|
<variablelist>
|
|
|
|
<varlistentry>
|
|
<term><varname>Storage=</varname></term>
|
|
|
|
<listitem><para>Controls where to store journal data. One of
|
|
<literal>volatile</literal>,
|
|
<literal>persistent</literal>,
|
|
<literal>auto</literal> and
|
|
<literal>none</literal>. If
|
|
<literal>volatile</literal>, journal
|
|
log data will be stored only in memory, i.e. below the
|
|
<filename>/run/log/journal</filename> hierarchy (which is
|
|
created if needed). If <literal>persistent</literal>, data
|
|
will be stored preferably on disk, i.e. below the
|
|
<filename>/var/log/journal</filename> hierarchy (which is
|
|
created if needed), with a fallback to
|
|
<filename>/run/log/journal</filename> (which is created if
|
|
needed), during early boot and if the disk is not writable.
|
|
<literal>auto</literal> is similar to
|
|
<literal>persistent</literal> but the directory
|
|
<filename>/var/log/journal</filename> is not created if
|
|
needed, so that its existence controls where log data goes.
|
|
<literal>none</literal> turns off all storage, all log data
|
|
received will be dropped. Forwarding to other targets, such as
|
|
the console, the kernel log buffer, or a syslog socket will
|
|
still work however. Defaults to
|
|
<literal>auto</literal>.</para></listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><varname>Compress=</varname></term>
|
|
|
|
<listitem><para>Takes a boolean value. If enabled (the
|
|
default), data objects that shall be stored in the journal and
|
|
are larger than a certain threshold are compressed before they
|
|
are written to the file system.</para></listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><varname>Seal=</varname></term>
|
|
|
|
<listitem><para>Takes a boolean value. If enabled (the
|
|
default), and a sealing key is available (as created by
|
|
<citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s
|
|
<option>--setup-keys</option> command), Forward Secure Sealing
|
|
(FSS) for all persistent journal files is enabled. FSS is
|
|
based on <ulink
|
|
url="https://eprint.iacr.org/2013/397">Seekable Sequential Key
|
|
Generators</ulink> by G. A. Marson and B. Poettering
|
|
(doi:10.1007/978-3-642-40203-6_7) and may be used to protect
|
|
journal files from unnoticed alteration.</para></listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><varname>SplitMode=</varname></term>
|
|
|
|
<listitem><para>Controls whether to split up journal files per
|
|
user. One of <literal>uid</literal>, <literal>login</literal>
|
|
and <literal>none</literal>. If <literal>uid</literal>, all
|
|
users will get each their own journal files regardless of
|
|
whether they possess a login session or not, however system
|
|
users will log into the system journal. If
|
|
<literal>login</literal>, actually logged-in users will get
|
|
each their own journal files, but users without login session
|
|
and system users will log into the system journal. If
|
|
<literal>none</literal>, journal files are not split up by
|
|
user and all messages are instead stored in the single system
|
|
journal. Note that splitting up journal files by user is only
|
|
available for journals stored persistently. If journals are
|
|
stored on volatile storage (see above), only a single journal
|
|
file for all user IDs is kept. Defaults to
|
|
<literal>uid</literal>.</para></listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><varname>RateLimitInterval=</varname></term>
|
|
<term><varname>RateLimitBurst=</varname></term>
|
|
|
|
<listitem><para>Configures the rate limiting that is applied
|
|
to all messages generated on the system. If, in the time
|
|
interval defined by <varname>RateLimitInterval=</varname>,
|
|
more messages than specified in
|
|
<varname>RateLimitBurst=</varname> are logged by a service,
|
|
all further messages within the interval are dropped until the
|
|
interval is over. A message about the number of dropped
|
|
messages is generated. This rate limiting is applied
|
|
per-service, so that two services which log do not interfere
|
|
with each other's limits. Defaults to 1000 messages in 30s.
|
|
The time specification for
|
|
<varname>RateLimitInterval=</varname> may be specified in the
|
|
following units: <literal>s</literal>, <literal>min</literal>,
|
|
<literal>h</literal>, <literal>ms</literal>,
|
|
<literal>us</literal>. To turn off any kind of rate limiting,
|
|
set either value to 0.</para></listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><varname>SystemMaxUse=</varname></term>
|
|
<term><varname>SystemKeepFree=</varname></term>
|
|
<term><varname>SystemMaxFileSize=</varname></term>
|
|
<term><varname>RuntimeMaxUse=</varname></term>
|
|
<term><varname>RuntimeKeepFree=</varname></term>
|
|
<term><varname>RuntimeMaxFileSize=</varname></term>
|
|
|
|
<listitem><para>Enforce size limits on the journal files
|
|
stored. The options prefixed with <literal>System</literal>
|
|
apply to the journal files when stored on a persistent file
|
|
system, more specifically
|
|
<filename>/var/log/journal</filename>. The options prefixed
|
|
with <literal>Runtime</literal> apply to the journal files
|
|
when stored on a volatile in-memory file system, more
|
|
specifically <filename>/run/log/journal</filename>. The former
|
|
is used only when <filename>/var</filename> is mounted,
|
|
writable, and the directory
|
|
<filename>/var/log/journal</filename> exists. Otherwise, only
|
|
the latter applies. Note that this means that during early
|
|
boot and if the administrator disabled persistent logging,
|
|
only the latter options apply, while the former apply if
|
|
persistent logging is enabled and the system is fully booted
|
|
up. <command>journalctl</command> and
|
|
<command>systemd-journald</command> ignore all files with
|
|
names not ending with <literal>.journal</literal> or
|
|
<literal>.journal~</literal>, so only such files, located in
|
|
the appropriate directories, are taken into account when
|
|
calculating current disk usage.
|
|
</para>
|
|
|
|
<para><varname>SystemMaxUse=</varname> and
|
|
<varname>RuntimeMaxUse=</varname> control how much disk space
|
|
the journal may use up at maximum.
|
|
<varname>SystemKeepFree=</varname> and
|
|
<varname>RuntimeKeepFree=</varname> control how much disk
|
|
space systemd-journald shall leave free for other uses.
|
|
<command>systemd-journald</command> will respect both limits
|
|
and use the smaller of the two values.</para>
|
|
|
|
<para>The first pair defaults to 10% and the second to 15% of
|
|
the size of the respective file system. If the file system is
|
|
nearly full and either <varname>SystemKeepFree=</varname> or
|
|
<varname>RuntimeKeepFree=</varname> is violated when
|
|
systemd-journald is started, the value will be raised to
|
|
percentage that is actually free. This means that if there was
|
|
enough free space before and journal files were created, and
|
|
subsequently something else causes the file system to fill up,
|
|
journald will stop using more space, but it will not be
|
|
removing existing files to go reduce footprint either.</para>
|
|
|
|
<para><varname>SystemMaxFileSize=</varname> and
|
|
<varname>RuntimeMaxFileSize=</varname> control how large
|
|
individual journal files may grow at maximum. This influences
|
|
the granularity in which disk space is made available through
|
|
rotation, i.e. deletion of historic data. Defaults to one
|
|
eighth of the values configured with
|
|
<varname>SystemMaxUse=</varname> and
|
|
<varname>RuntimeMaxUse=</varname>, so that usually seven
|
|
rotated journal files are kept as history. Specify values in
|
|
bytes or use K, M, G, T, P, E as units for the specified sizes
|
|
(equal to 1024, 1024²,... bytes). Note that size limits are
|
|
enforced synchronously when journal files are extended, and no
|
|
explicit rotation step triggered by time is
|
|
needed.</para></listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><varname>MaxFileSec=</varname></term>
|
|
|
|
<listitem><para>The maximum time to store entries in a single
|
|
journal file before rotating to the next one. Normally,
|
|
time-based rotation should not be required as size-based
|
|
rotation with options such as
|
|
<varname>SystemMaxFileSize=</varname> should be sufficient to
|
|
ensure that journal files do not grow without bounds. However,
|
|
to ensure that not too much data is lost at once when old
|
|
journal files are deleted, it might make sense to change this
|
|
value from the default of one month. Set to 0 to turn off this
|
|
feature. This setting takes time values which may be suffixed
|
|
with the units <literal>year</literal>,
|
|
<literal>month</literal>, <literal>week</literal>,
|
|
<literal>day</literal>, <literal>h</literal> or
|
|
<literal>m</literal> to override the default time unit of
|
|
seconds.</para></listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><varname>MaxRetentionSec=</varname></term>
|
|
|
|
<listitem><para>The maximum time to store journal entries.
|
|
This controls whether journal files containing entries older
|
|
then the specified time span are deleted. Normally, time-based
|
|
deletion of old journal files should not be required as
|
|
size-based deletion with options such as
|
|
<varname>SystemMaxUse=</varname> should be sufficient to
|
|
ensure that journal files do not grow without bounds. However,
|
|
to enforce data retention policies, it might make sense to
|
|
change this value from the default of 0 (which turns off this
|
|
feature). This setting also takes time values which may be
|
|
suffixed with the units <literal>year</literal>,
|
|
<literal>month</literal>, <literal>week</literal>,
|
|
<literal>day</literal>, <literal>h</literal> or <literal>
|
|
m</literal> to override the default time unit of
|
|
seconds.</para></listitem>
|
|
</varlistentry>
|
|
|
|
|
|
<varlistentry>
|
|
<term><varname>SyncIntervalSec=</varname></term>
|
|
|
|
<listitem><para>The timeout before synchronizing journal files
|
|
to disk. After syncing, journal files are placed in the
|
|
OFFLINE state. Note that syncing is unconditionally done
|
|
immediately after a log message of priority CRIT, ALERT or
|
|
EMERG has been logged. This setting hence applies only to
|
|
messages of the levels ERR, WARNING, NOTICE, INFO, DEBUG. The
|
|
default timeout is 5 minutes. </para></listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><varname>ForwardToSyslog=</varname></term>
|
|
<term><varname>ForwardToKMsg=</varname></term>
|
|
<term><varname>ForwardToConsole=</varname></term>
|
|
<term><varname>ForwardToWall=</varname></term>
|
|
|
|
<listitem><para>Control whether log messages received by the
|
|
journal daemon shall be forwarded to a traditional syslog
|
|
daemon, to the kernel log buffer (kmsg), to the system
|
|
console, or sent as wall messages to all logged-in users.
|
|
These options take boolean arguments. If forwarding to syslog
|
|
is enabled but nothing reads messages from the socket,
|
|
forwarding to syslog has no effect. By default, only
|
|
forwarding to wall is enabled. These settings may be
|
|
overridden at boot time with the kernel command line options
|
|
<literal>systemd.journald.forward_to_syslog=</literal>,
|
|
<literal>systemd.journald.forward_to_kmsg=</literal>,
|
|
<literal>systemd.journald.forward_to_console=</literal>, and
|
|
<literal>systemd.journald.forward_to_wall=</literal>. When
|
|
forwarding to the console, the TTY to log to can be changed
|
|
with <varname>TTYPath=</varname>, described
|
|
below.</para></listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><varname>MaxLevelStore=</varname></term>
|
|
<term><varname>MaxLevelSyslog=</varname></term>
|
|
<term><varname>MaxLevelKMsg=</varname></term>
|
|
<term><varname>MaxLevelConsole=</varname></term>
|
|
<term><varname>MaxLevelWall=</varname></term>
|
|
|
|
<listitem><para>Controls the maximum log level of messages
|
|
that are stored on disk, forwarded to syslog, kmsg, the
|
|
console or wall (if that is enabled, see above). As argument,
|
|
takes one of
|
|
<literal>emerg</literal>,
|
|
<literal>alert</literal>,
|
|
<literal>crit</literal>,
|
|
<literal>err</literal>,
|
|
<literal>warning</literal>,
|
|
<literal>notice</literal>,
|
|
<literal>info</literal>,
|
|
<literal>debug</literal>,
|
|
or integer values in the range of 0..7 (corresponding to the
|
|
same levels). Messages equal or below the log level specified
|
|
are stored/forwarded, messages above are dropped. Defaults to
|
|
<literal>debug</literal> for <varname>MaxLevelStore=</varname>
|
|
and <varname>MaxLevelSyslog=</varname>, to ensure that the all
|
|
messages are written to disk and forwarded to syslog. Defaults
|
|
to
|
|
<literal>notice</literal> for <varname>MaxLevelKMsg=</varname>,
|
|
<literal>info</literal> for <varname>MaxLevelConsole=</varname>,
|
|
and <literal>emerg</literal> for
|
|
<varname>MaxLevelWall=</varname>.</para></listitem>
|
|
</varlistentry>
|
|
|
|
<varlistentry>
|
|
<term><varname>TTYPath=</varname></term>
|
|
|
|
<listitem><para>Change the console TTY to use if
|
|
<varname>ForwardToConsole=yes</varname> is used. Defaults to
|
|
<filename>/dev/console</filename>.</para></listitem>
|
|
</varlistentry>
|
|
|
|
</variablelist>
|
|
|
|
</refsect1>
|
|
|
|
<refsect1>
|
|
<title>Forwarding to traditional syslog daemons</title>
|
|
|
|
<para>
|
|
Journal events can be transferred to a different logging daemon
|
|
in two different ways. In the first method, messages are
|
|
immediately forwarded to a socket
|
|
(<filename>/run/systemd/journal/syslog</filename>), where the
|
|
traditional syslog daemon can read them. This method is
|
|
controlled by <varname>ForwardToSyslog=</varname> option. In a
|
|
second method, a syslog daemon behaves like a normal journal
|
|
client, and reads messages from the journal files, similarly to
|
|
<citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
|
|
In this method, messages do not have to be read immediately,
|
|
which allows a logging daemon which is only started late in boot
|
|
to access all messages since the start of the system. In
|
|
addition, full structured meta-data is available to it. This
|
|
method of course is available only if the messages are stored in
|
|
a journal file at all. So it will not work if
|
|
<varname>Storage=none</varname> is set. It should be noted that
|
|
usually the <emphasis>second</emphasis> method is used by syslog
|
|
daemons, so the <varname>Storage=</varname> option, and not the
|
|
<varname>ForwardToSyslog=</varname> option, is relevant for them.
|
|
</para>
|
|
</refsect1>
|
|
|
|
<refsect1>
|
|
<title>See Also</title>
|
|
<para>
|
|
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
|
|
<citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
|
|
<citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
|
|
<citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
|
|
<citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>
|
|
</para>
|
|
</refsect1>
|
|
|
|
</refentry>
|