1
0
mirror of https://github.com/systemd/systemd.git synced 2024-12-23 21:35:11 +03:00
systemd/man/sd_journal_seek_head.xml
Tom Gundersen 12b42c7667 man: revert dynamic paths for split-usr setups
This did not really work out as we had hoped. Trying to do this upstream
introduced several problems that probably makes it better suited as a
downstream patch after all. At any rate, it is not releaseable in the
current state, so we at least need to revert this before the release.

 * by adjusting the path to binaries, but not do the same thing to the
   search path we end up with inconsistent man-pages. Adjusting the search
   path too would be quite messy, and it is not at all obvious that this is
   worth the effort, but at any rate it would have to be done before we
   could ship this.

 * this means that distributed man-pages does not make sense as they depend
   on config options, and for better or worse we are still distributing
   man pages, so that is something that definitely needs sorting out before
   we could ship with this patch.

 * we have long held that split-usr is only minimally supported in order
   to boot, and something we hope will eventually go away. So before we start
   adding even more magic/effort in order to make this work nicely, we should
   probably question if it makes sense at all.
2015-06-18 19:47:44 +02:00

173 lines
7.0 KiB
XML
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version='1.0'?> <!--*-nxml-*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<!--
This file is part of systemd.
Copyright 2012 Lennart Poettering
systemd is free software; you can redistribute it and/or modify it
under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
<refentry id="sd_journal_seek_head">
<refentryinfo>
<title>sd_journal_seek_head</title>
<productname>systemd</productname>
<authorgroup>
<author>
<contrib>Developer</contrib>
<firstname>Lennart</firstname>
<surname>Poettering</surname>
<email>lennart@poettering.net</email>
</author>
</authorgroup>
</refentryinfo>
<refmeta>
<refentrytitle>sd_journal_seek_head</refentrytitle>
<manvolnum>3</manvolnum>
</refmeta>
<refnamediv>
<refname>sd_journal_seek_head</refname>
<refname>sd_journal_seek_tail</refname>
<refname>sd_journal_seek_monotonic_usec</refname>
<refname>sd_journal_seek_realtime_usec</refname>
<refname>sd_journal_seek_cursor</refname>
<refpurpose>Seek to a position in the
journal</refpurpose>
</refnamediv>
<refsynopsisdiv>
<funcsynopsis>
<funcsynopsisinfo>#include &lt;systemd/sd-journal.h&gt;</funcsynopsisinfo>
<funcprototype>
<funcdef>int <function>sd_journal_seek_head</function></funcdef>
<paramdef>sd_journal *<parameter>j</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_journal_seek_tail</function></funcdef>
<paramdef>sd_journal *<parameter>j</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_journal_seek_monotonic_usec</function></funcdef>
<paramdef>sd_journal *<parameter>j</parameter></paramdef>
<paramdef>sd_id128_t <parameter>boot_id</parameter></paramdef>
<paramdef>uint64_t <parameter>usec</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_journal_seek_realtime_usec</function></funcdef>
<paramdef>sd_journal *<parameter>j</parameter></paramdef>
<paramdef>uint64_t <parameter>usec</parameter></paramdef>
</funcprototype>
<funcprototype>
<funcdef>int <function>sd_journal_seek_cursor</function></funcdef>
<paramdef>sd_journal *<parameter>j</parameter></paramdef>
<paramdef>const char *<parameter>cursor</parameter></paramdef>
</funcprototype>
</funcsynopsis>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para><function>sd_journal_seek_head()</function> seeks to the
beginning of the journal, i.e. the oldest available entry.</para>
<para>Similarly, <function>sd_journal_seek_tail()</function> may
be used to seek to the end of the journal, i.e. the most recent
available entry.</para>
<para><function>sd_journal_seek_monotonic_usec()</function> seeks
to the entry with the specified monotonic timestamp, i.e.
<constant>CLOCK_MONOTONIC</constant>. Since monotonic time
restarts on every reboot a boot ID needs to be specified as
well.</para>
<para><function>sd_journal_seek_realtime_usec()</function> seeks
to the entry with the specified realtime (wallclock) timestamp,
i.e. <constant>CLOCK_REALTIME</constant>. Note that the realtime
clock is not necessarily monotonic. If a realtime timestamp is
ambiguous, it is not defined which position is sought to.</para>
<para><function>sd_journal_seek_cursor()</function> seeks to the
entry located at the specified cursor string. For details on
cursors, see
<citerefentry><refentrytitle>sd_journal_get_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
If no entry matching the specified cursor is found the call will
seek to the next closest entry (in terms of time) instead. To
verify whether the newly selected entry actually matches the
cursor, use
<citerefentry><refentrytitle>sd_journal_test_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para>
<para>Note that these calls do not actually make any entry the new
current entry, this needs to be done in a separate step with a
subsequent
<citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>
invocation (or a similar call). Only then, entry data may be
retrieved via
<citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
If no entry exists that matches exactly the specified seek
address, the next closest is sought to. If
<citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>
is used, the closest following entry will be sought to, if
<citerefentry><refentrytitle>sd_journal_previous</refentrytitle><manvolnum>3</manvolnum></citerefentry>
is used the closest preceding entry is sought to.</para>
</refsect1>
<refsect1>
<title>Return Value</title>
<para>The functions return 0 on success or a negative errno-style
error code.</para>
</refsect1>
<refsect1>
<title>Notes</title>
<para>The <function>sd_journal_seek_head()</function>,
<function>sd_journal_seek_tail()</function>,
<function>sd_journal_seek_monotonic_usec()</function>,
<function>sd_journal_seek_realtime_usec()</function>,
and <function>sd_journal_seek_cursor()</function>
interfaces are available as a shared library, which can
be compiled and linked to with the
<constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry>
file.</para>
</refsect1>
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_journal_get_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
<citerefentry><refentrytitle>sd_journal_get_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>
</para>
</refsect1>
</refentry>