shaba/systemd
1
0
Fork 0
mirror of https://github.com/systemd/systemd.git synced 2024-12-22 17:35:35 +03:00
Code
72f61bff1a
systemd/man/systemd.netdev.xml
Yu Watanabe 8cca30da53 man: update documentation about basic .netdev file handling 
Follow-up for #34909 and later PRs.

(cherry picked from commit d07fbf22ed)
2024-11-29 14:26:56 +01:00

2954 lines
122 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version='1.0'?> <!--*-nxml-*-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->
<refentry id="systemd.netdev" conditional='ENABLE_NETWORKD'
xmlns:xi="http://www.w3.org/2001/XInclude">
<refentryinfo>
<title>systemd.network</title>
<productname>systemd</productname>
</refentryinfo>
<refmeta>
<refentrytitle>systemd.netdev</refentrytitle>
<manvolnum>5</manvolnum>
</refmeta>
<refnamediv>
<refname>systemd.netdev</refname>
<refpurpose>Virtual Network Device configuration</refpurpose>
</refnamediv>
<refsynopsisdiv>
<para><filename><replaceable>netdev</replaceable>.netdev</filename></para>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>A plain ini-style text file that encodes configuration about a virtual network device, used by
<citerefentry><refentrytitle>systemd-networkd</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
See <citerefentry><refentrytitle>systemd.syntax</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for a general description of the syntax.</para>
<para>The main Virtual Network Device file must have the extension <filename>.netdev</filename>;
other extensions are ignored. Virtual network devices are created as soon as
<command>systemd-networkd</command> is started if possible. If a netdev with the specified name already
exists, <command>systemd-networkd</command> will try to update the config if the kind of the existing
netdev is equivalent to the requested one, otherwise (e.g. when bridge device <filename>foo</filename>
exists but bonding device with the same name is configured in a .netdev file) use the existing netdev
as-is rather than replacing with the requested netdev. Note, several settings (e.g. vlan ID) cannot be
changed after the netdev is created. To change such settings, it is necessary to first remove the
existing netdev, and then run <command>networkctl reload</command> command or restart
<command>systemd-networkd</command>. See also
<citerefentry><refentrytitle>networkctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para>
<para>The <filename>.netdev</filename> files are read from the files located in the system network
directory <filename>/usr/lib/systemd/network</filename> and
<filename>/usr/local/lib/systemd/network</filename>, the volatile runtime network directory
<filename>/run/systemd/network</filename> and the local administration network directory
<filename>/etc/systemd/network</filename>. All configuration files are collectively sorted and
processed in alphanumeric order, regardless of the directories in which they live. However, files
with identical filenames replace each other. It is recommended that each filename is prefixed with
a number smaller than <literal>70</literal> (e.g. <filename>10-vlan.netdev</filename>). Otherwise,
<filename>.netdev</filename> files generated by
<citerefentry><refentrytitle>systemd-network-generator.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
may take precedence over user configured files. Files in <filename>/etc/</filename> have the
highest priority, files in <filename>/run/</filename> take precedence over files with the same name
in <filename>/usr/lib/</filename>. This can be used to override a system-supplied configuration
file with a local file if needed. As a special case, an empty file (file size 0) or symlink with
the same name pointing to <filename>/dev/null</filename> disables the configuration file entirely
(it is "masked").</para>
<para>Along with the netdev file <filename>foo.netdev</filename>, a "drop-in" directory
<filename>foo.netdev.d/</filename> may exist. All files with the suffix <literal>.conf</literal>
from this directory will be merged in the alphanumeric order and parsed after the main file itself
has been parsed. This is useful to alter or add configuration settings, without having to modify
the main configuration file. Each drop-in file must have appropriate section headers.</para>
<para>In addition to <filename>/etc/systemd/network</filename>, drop-in <literal>.d</literal>
directories can be placed in <filename>/usr/lib/systemd/network</filename> or
<filename>/run/systemd/network</filename> directories. Drop-in files in
<filename>/etc/</filename> take precedence over those in <filename>/run/</filename> which in turn
take precedence over those in <filename>/usr/lib/</filename>. Drop-in files under any of these
directories take precedence over the main netdev file wherever located. (Of course, since
<filename>/run/</filename> is temporary and <filename>/usr/lib/</filename> is for vendors, it is
unlikely drop-ins should be used in either of those places.)</para>
</refsect1>
<refsect1>
<title>Supported netdev kinds</title>
<para>The following kinds of virtual network devices may be
configured in <filename>.netdev</filename> files:</para>
<table>
<title>Supported kinds of virtual network devices</title>
<tgroup cols='2'>
<colspec colname='kind' />
<colspec colname='explanation' />
<thead><row>
<entry>Kind</entry>
<entry>Description</entry>
</row></thead>
<tbody>
<row><entry><varname>bond</varname></entry>
<entry>A bond device is an aggregation of all its slave devices. See <ulink url="https://docs.kernel.org/networking/bonding.html">Linux Ethernet Bonding Driver HOWTO</ulink> for details.</entry></row>
<row><entry><varname>bridge</varname></entry>
<entry>A bridge device is a software switch, and each of its slave devices and the bridge itself are ports of the switch.</entry></row>
<row><entry><varname>dummy</varname></entry>
<entry>A dummy device drops all packets sent to it.</entry></row>
<row><entry><varname>gre</varname></entry>
<entry>A Level 3 GRE tunnel over IPv4. See <ulink url="https://tools.ietf.org/html/rfc2784">RFC 2784</ulink> for details. Name <literal>gre0</literal> should not be used, as the kernel creates a device with this name when the corresponding kernel module is loaded.</entry></row>
<row><entry><varname>gretap</varname></entry>
<entry>A Level 2 GRE tunnel over IPv4. Name <literal>gretap0</literal> should not be used, as the kernel creates a device with this name when the corresponding kernel module is loaded.</entry></row>
<row><entry><varname>erspan</varname></entry>
<entry>ERSPAN mirrors traffic on one or more source ports and delivers the mirrored traffic to one or more destination ports on another switch. The traffic is encapsulated in generic routing encapsulation (GRE) and is therefore routable across a layer 3 network between the source switch and the destination switch. Name <literal>erspan0</literal> should not be used, as the kernel creates a device with this name when the corresponding kernel module is loaded.</entry></row>
<row><entry><varname>ip6gre</varname></entry>
<entry>A Level 3 GRE tunnel over IPv6.</entry></row>
<row><entry><varname>ip6tnl</varname></entry>
<entry>An IPv4 or IPv6 tunnel over IPv6</entry></row>
<row><entry><varname>ip6gretap</varname></entry>
<entry>A Level 2 GRE tunnel over IPv6.</entry></row>
<row><entry><varname>ipip</varname></entry>
<entry>An IPv4 over IPv4 tunnel.</entry></row>
<row><entry><varname>ipvlan</varname></entry>
<entry>An IPVLAN device is a stacked device which receives packets from its underlying device based on IP address filtering.</entry></row>
<row><entry><varname>ipvtap</varname></entry>
<entry>An IPVTAP device is a stacked device which receives packets from its underlying device based on IP address filtering and can be accessed using the tap user space interface.</entry></row>
<row><entry><varname>macvlan</varname></entry>
<entry>A macvlan device is a stacked device which receives packets from its underlying device based on MAC address filtering.</entry></row>
<row><entry><varname>macvtap</varname></entry>
<entry>A macvtap device is a stacked device which receives packets from its underlying device based on MAC address filtering.</entry></row>
<row><entry><varname>sit</varname></entry>
<entry>An IPv6 over IPv4 tunnel.</entry></row>
<row><entry><varname>tap</varname></entry>
<entry>A persistent Level 2 tunnel between a network device and a device node.</entry></row>
<row><entry><varname>tun</varname></entry>
<entry>A persistent Level 3 tunnel between a network device and a device node.</entry></row>
<row><entry><varname>veth</varname></entry>
<entry>An Ethernet tunnel between a pair of network devices.</entry></row>
<row><entry><varname>vlan</varname></entry>
<entry>A VLAN is a stacked device which receives packets from its underlying device based on VLAN tagging. See <ulink url="http://www.ieee802.org/1/pages/802.1Q.html">IEEE 802.1Q</ulink> for details.</entry></row>
<row><entry><varname>vti</varname></entry>
<entry>An IPv4 over IPSec tunnel.</entry></row>
<row><entry><varname>vti6</varname></entry>
<entry>An IPv6 over IPSec tunnel.</entry></row>
<row><entry><varname>vxlan</varname></entry>
<entry>A virtual extensible LAN (vxlan), for connecting Cloud computing deployments.</entry></row>
<row><entry><varname>geneve</varname></entry>
<entry>A GEneric NEtwork Virtualization Encapsulation (GENEVE) netdev driver.</entry></row>
<row><entry><varname>l2tp</varname></entry>
<entry>A Layer 2 Tunneling Protocol (L2TP) is a tunneling protocol used to support virtual private networks (VPNs) or as part of the delivery of services by ISPs. It does not provide any encryption or confidentiality by itself</entry></row>
<row><entry><varname>macsec</varname></entry>
<entry>Media Access Control Security (MACsec) is an 802.1AE IEEE industry-standard security technology that provides secure communication for all traffic on Ethernet links. MACsec provides point-to-point security on Ethernet links between directly connected nodes and is capable of identifying and preventing most security threats.</entry></row>
<row><entry><varname>vrf</varname></entry>
<entry>A Virtual Routing and Forwarding (<ulink url="https://docs.kernel.org/networking/vrf.html">VRF</ulink>) interface to create separate routing and forwarding domains.</entry></row>
<row><entry><varname>vcan</varname></entry>
<entry>The virtual CAN driver (vcan). Similar to the network loopback devices, vcan offers a virtual local CAN interface.</entry></row>
<row><entry><varname>vxcan</varname></entry>
<entry>The virtual CAN tunnel driver (vxcan). Similar to the virtual ethernet driver veth, vxcan implements a local CAN traffic tunnel between two virtual CAN network devices. When creating a vxcan, two vxcan devices are created as pair. When one end receives the packet it appears on its pair and vice versa. The vxcan can be used for cross namespace communication.
</entry></row>
<row><entry><varname>wireguard</varname></entry>
<entry>WireGuard Secure Network Tunnel.</entry></row>
<row><entry><varname>nlmon</varname></entry>
<entry>A Netlink monitor device. Use an nlmon device when you want to monitor system Netlink messages.</entry></row>
<row><entry><varname>fou</varname></entry>
<entry>Foo-over-UDP tunneling.</entry></row>
<row><entry><varname>xfrm</varname></entry>
<entry>A virtual tunnel interface like vti/vti6 but with several advantages.</entry></row>
<row><entry><varname>ifb</varname></entry>
<entry>The Intermediate Functional Block (ifb) pseudo network interface acts as a QoS concentrator for multiple different sources of traffic.</entry></row>
<row><entry><varname>bareudp</varname></entry>
<entry>Bare UDP tunnels provide a generic L3 encapsulation support for tunnelling different L3 protocols like MPLS, IP etc. inside of a UDP tunnel.</entry></row>
<row><entry><varname>batadv</varname></entry>
<entry><ulink url="https://www.open-mesh.org/projects/open-mesh/wiki">B.A.T.M.A.N. Advanced</ulink> is a routing protocol for multi-hop mobile ad-hoc networks which operates on layer 2.</entry></row>
<row><entry><varname>ipoib</varname></entry>
<entry>An IP over Infiniband subinterface.</entry></row>
<row><entry><varname>wlan</varname></entry>
<entry>A virtual wireless network (WLAN) interface.</entry></row>
</tbody>
</tgroup>
</table>
</refsect1>
<refsect1>
<title>[Match] Section Options</title>
<para>A virtual network device is only created if the [Match] section matches the current
environment, or if the section is empty. The following keys are accepted:</para>
<variablelist class='network-directives'>
<xi:include href="systemd.link.xml" xpointer="host" />
<xi:include href="systemd.link.xml" xpointer="virtualization" />
<xi:include href="systemd.link.xml" xpointer="kernel-command-line" />
<xi:include href="systemd.link.xml" xpointer="kernel-version" />
<xi:include href="systemd.link.xml" xpointer="credential" />
<xi:include href="systemd.link.xml" xpointer="architecture" />
<xi:include href="systemd.link.xml" xpointer="firmware" />
</variablelist>
</refsect1>
<refsect1>
<title>[NetDev] Section Options</title>
<para>The [NetDev] section accepts the
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Description=</varname></term>
<listitem>
<para>A free-form description of the netdev.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Name=</varname></term>
<listitem>
<para>The interface name used when creating the netdev.
This setting is compulsory.</para>
<xi:include href="version-info.xml" xpointer="v211"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Kind=</varname></term>
<listitem>
<para>The netdev kind. This setting is compulsory. See the
<literal>Supported netdev kinds</literal> section for the
valid keys.</para>
<xi:include href="version-info.xml" xpointer="v211"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MTUBytes=</varname></term>
<listitem>
<para>The maximum transmission unit in bytes to set for the device. The usual suffixes K, M, G
are supported and are understood to the base of 1024. For <literal>tun</literal> or
<literal>tap</literal> devices, <varname>MTUBytes=</varname> setting is not currently supported in
[NetDev] section. Please specify it in [Link] section of
corresponding
<citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>
files.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MACAddress=</varname></term>
<listitem>
<para>Specifies the MAC address to use for the device, or takes the special value
<literal>none</literal>. When <literal>none</literal>, <command>systemd-networkd</command>
does not request the MAC address for the device, and the kernel will assign a random MAC
address. For <literal>tun</literal>, <literal>tap</literal>, or <literal>l2tp</literal>
devices, the <varname>MACAddress=</varname> setting in the [NetDev] section is not
supported and will be ignored. Please specify it in the [Link] section of the corresponding
<citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>
file. If this option is not set, <literal>vlan</literal> device inherits the MAC address of
the master interface. For other kind of netdevs, if this option is not set, then the MAC
address is generated based on the interface name and the
<citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
<para>Note, even if <literal>none</literal> is specified, <command>systemd-udevd</command>
will assign the persistent MAC address for the device, as <filename>99-default.link</filename>
has <varname>MACAddressPolicy=persistent</varname>. So, it is also necessary to create a
custom .link file for the device, if the MAC address assignment is not desired.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[Bridge] Section Options</title>
<para>The [Bridge] section only applies for
netdevs of kind <literal>bridge</literal>, and accepts the
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>HelloTimeSec=</varname></term>
<listitem>
<para>HelloTimeSec specifies the number of seconds between two hello packets
sent out by the root bridge and the designated bridges. Hello packets are
used to communicate information about the topology throughout the entire
bridged local area network.</para>
<xi:include href="version-info.xml" xpointer="v227"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MaxAgeSec=</varname></term>
<listitem>
<para>MaxAgeSec specifies the number of seconds of maximum message age.
If the last seen (received) hello packet is more than this number of
seconds old, the bridge in question will start the takeover procedure
in attempt to become the Root Bridge itself.</para>
<xi:include href="version-info.xml" xpointer="v227"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ForwardDelaySec=</varname></term>
<listitem>
<para>ForwardDelaySec specifies the number of seconds spent in each
of the Listening and Learning states before the Forwarding state is entered.</para>
<xi:include href="version-info.xml" xpointer="v227"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>AgeingTimeSec=</varname></term>
<listitem>
<para>This specifies the number of seconds a MAC Address will be kept in
the forwarding database after having a packet received from this MAC Address.</para>
<xi:include href="version-info.xml" xpointer="v232"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Priority=</varname></term>
<listitem>
<para>The priority of the bridge. An integer between 0 and 65535. A lower value
means higher priority. The bridge having the lowest priority will be elected as root bridge.</para>
<xi:include href="version-info.xml" xpointer="v232"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>GroupForwardMask=</varname></term>
<listitem>
<para>A 16-bit bitmask represented as an integer which allows forwarding of link
local frames with 802.1D reserved addresses (01:80:C2:00:00:0X). A logical AND
is performed between the specified bitmask and the exponentiation of 2^X, the
lower nibble of the last octet of the MAC address. For example, a value of 8
would allow forwarding of frames addressed to 01:80:C2:00:00:03 (802.1X PAE).</para>
<xi:include href="version-info.xml" xpointer="v235"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>DefaultPVID=</varname></term>
<listitem>
<para>This specifies the default port VLAN ID of a newly attached bridge port.
Set this to an integer in the range 1…4094 or <literal>none</literal> to disable the PVID.</para>
<xi:include href="version-info.xml" xpointer="v232"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MulticastQuerier=</varname></term>
<listitem>
<para>Takes a boolean. This setting controls the IFLA_BR_MCAST_QUERIER option in the kernel.
If enabled, the kernel will send general ICMP queries from a zero source address.
This feature should allow faster convergence on startup, but it causes some
multicast-aware switches to misbehave and disrupt forwarding of multicast packets.
When unset, the kernel's default will be used.
</para>
<xi:include href="version-info.xml" xpointer="v230"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MulticastSnooping=</varname></term>
<listitem>
<para>Takes a boolean. This setting controls the IFLA_BR_MCAST_SNOOPING option in the kernel.
If enabled, IGMP snooping monitors the Internet Group Management Protocol (IGMP) traffic
between hosts and multicast routers. When unset, the kernel's default will be used.
</para>
<xi:include href="version-info.xml" xpointer="v230"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>VLANFiltering=</varname></term>
<listitem>
<para>Takes a boolean. This setting controls the IFLA_BR_VLAN_FILTERING option in the kernel.
If enabled, the bridge will be started in VLAN-filtering mode. When unset, the kernel's default will be used.
</para>
<xi:include href="version-info.xml" xpointer="v231"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>VLANProtocol=</varname></term>
<listitem>
<para>Allows setting the protocol used for VLAN filtering. Takes
<option>802.1q</option> or,
<option>802.1ad</option>, and defaults to unset and kernel's default is used.
</para>
<xi:include href="version-info.xml" xpointer="v246"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>STP=</varname></term>
<listitem>
<para>Takes a boolean. This enables the bridge's Spanning Tree Protocol (STP).
When unset, the kernel's default will be used.
</para>
<xi:include href="version-info.xml" xpointer="v232"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MulticastIGMPVersion=</varname></term>
<listitem>
<para>Allows changing bridge's multicast Internet Group Management Protocol (IGMP) version.
Takes an integer 2 or 3. When unset, the kernel's default will be used.
</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[VLAN] Section Options</title>
<para>The [VLAN] section only applies for
netdevs of kind <literal>vlan</literal>, and accepts the
following key:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Id=</varname></term>
<listitem>
<para>The VLAN ID to use. An integer in the range 0…4094.
This setting is compulsory.</para>
<xi:include href="version-info.xml" xpointer="v211"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Protocol=</varname></term>
<listitem>
<para>Allows setting the protocol used for the VLAN interface. Takes <literal>802.1q</literal> or,
<literal>802.1ad</literal>, and defaults to unset and kernel's default is used.</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>GVRP=</varname></term>
<listitem>
<para>Takes a boolean. The Generic VLAN Registration Protocol (GVRP) is a protocol that
allows automatic learning of VLANs on a network.
When unset, the kernel's default will be used.
</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MVRP=</varname></term>
<listitem>
<para>Takes a boolean. Multiple VLAN Registration Protocol (MVRP) formerly known as GARP VLAN
Registration Protocol (GVRP) is a standards-based Layer 2 network protocol,
for automatic configuration of VLAN information on switches. It was defined
in the 802.1ak amendment to 802.1Q-2005. When unset, the kernel's default will be used.
</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>LooseBinding=</varname></term>
<listitem>
<para>Takes a boolean. The VLAN loose binding mode, in which only the operational state is passed
from the parent to the associated VLANs, but the VLAN device state is not changed.
When unset, the kernel's default will be used.</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ReorderHeader=</varname></term>
<listitem>
<para>Takes a boolean. When enabled, the VLAN reorder header is used and VLAN interfaces behave
like physical interfaces. When unset, the kernel's default will be used.</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>EgressQOSMaps=</varname></term>
<term><varname>IngressQOSMaps=</varname></term>
<listitem>
<para>Defines a mapping of Linux internal packet priority (<constant>SO_PRIORITY</constant>)
to VLAN header PCP field for outgoing and incoming frames, respectively. Takes a
whitespace-separated list of integer pairs, where each integer must be in the range
1…4294967294, in the format <literal>from</literal>-<literal>to</literal>, e.g.,
<literal>21-7 45-5</literal>. Note that <literal>from</literal> must be greater than or equal
to <literal>to</literal>. When unset, the kernel's default will be used.</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[MACVLAN] Section Options</title>
<para>The [MACVLAN] section only applies for
netdevs of kind <literal>macvlan</literal>, and accepts the
following key:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Mode=</varname></term>
<listitem>
<para>The MACVLAN mode to use. The supported options are
<literal>private</literal>,
<literal>vepa</literal>,
<literal>bridge</literal>,
<literal>passthru</literal>, and
<literal>source</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v211"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>SourceMACAddress=</varname></term>
<listitem>
<para>A whitespace-separated list of remote hardware addresses allowed on the MACVLAN. This
option only has an effect in source mode. Use full colon-, hyphen- or dot-delimited
hexadecimal. This option may appear more than once, in which case the lists are merged. If
the empty string is assigned to this option, the list of hardware addresses defined prior
to this is reset. Defaults to unset.</para>
<xi:include href="version-info.xml" xpointer="v246"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>BroadcastMulticastQueueLength=</varname></term>
<listitem>
<para>Specifies the length of the receive queue for broadcast/multicast packets. An unsigned
integer in the range 0…4294967294. Defaults to unset.</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>BroadcastQueueThreshold=</varname></term>
<listitem>
<para>Controls the threshold for broadcast queueing of the macvlan device. Takes the special value
<literal>no</literal>, or an integer in the range 0…2147483647. When <literal>no</literal> is
specified, the broadcast queueing is disabled altogether. When an integer is specified, a multicast
address will be queued as broadcast if the number of devices using the macvlan is greater than the given
value. Defaults to unset, and the kernel default will be used.</para>
<xi:include href="version-info.xml" xpointer="v256"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[MACVTAP] Section Options</title>
<para>The [MACVTAP] section applies for netdevs of kind <literal>macvtap</literal> and accepts the same
keys as [MACVLAN].</para>
</refsect1>
<refsect1>
<title>[IPVLAN] Section Options</title>
<para>The [IPVLAN] section only applies for
netdevs of kind <literal>ipvlan</literal>, and accepts the
following key:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Mode=</varname></term>
<listitem>
<para>The IPVLAN mode to use. The supported options are
<literal>L2</literal>,<literal>L3</literal> and <literal>L3S</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v219"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Flags=</varname></term>
<listitem>
<para>The IPVLAN flags to use. The supported options are
<literal>bridge</literal>,<literal>private</literal> and <literal>vepa</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v237"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[IPVTAP] Section Options</title>
<para>The [IPVTAP] section only applies for netdevs of kind <literal>ipvtap</literal> and accepts the
same keys as [IPVLAN].</para>
</refsect1>
<refsect1>
<title>[VXLAN] Section Options</title>
<para>The [VXLAN] section only applies for
netdevs of kind <literal>vxlan</literal>, and accepts the
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>VNI=</varname></term>
<listitem>
<para>The VXLAN Network Identifier (or VXLAN Segment ID). Takes a number in the range 1…16777215.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Remote=</varname></term>
<listitem>
<para>Configures destination IP address.</para>
<xi:include href="version-info.xml" xpointer="v233"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Local=</varname></term>
<listitem>
<para>Configures local IP address. It must be an address on the underlying interface of the
VXLAN interface, or one of the special values <literal>ipv4_link_local</literal>,
<literal>ipv6_link_local</literal>, <literal>dhcp4</literal>, <literal>dhcp6</literal>, and
<literal>slaac</literal>. If one of the special values is specified, an address which matches
the corresponding type on the underlying interface will be used. Defaults to unset.</para>
<xi:include href="version-info.xml" xpointer="v233"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Group=</varname></term>
<listitem>
<para>Configures VXLAN multicast group IP address. All members of a VXLAN must use the same
multicast group address.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>TOS=</varname></term>
<listitem>
<para>The Type Of Service byte value for a vxlan interface.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>TTL=</varname></term>
<listitem>
<para>A fixed Time To Live N on Virtual eXtensible Local Area Network packets.
Takes <literal>inherit</literal> or a number in the range 0…255. 0 is a special
value meaning inherit the inner protocol's TTL value. <literal>inherit</literal>
means that it will inherit the outer protocol's TTL value.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MacLearning=</varname></term>
<listitem>
<para>Takes a boolean. When true, enables dynamic MAC learning
to discover remote MAC addresses.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>FDBAgeingSec=</varname></term>
<listitem>
<para>The lifetime of Forwarding Database entry learnt by
the kernel, in seconds.</para>
<xi:include href="version-info.xml" xpointer="v218"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MaximumFDBEntries=</varname></term>
<listitem>
<para>Configures maximum number of FDB entries.</para>
<xi:include href="version-info.xml" xpointer="v228"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ReduceARPProxy=</varname></term>
<listitem>
<para>Takes a boolean. When true, bridge-connected VXLAN tunnel endpoint answers ARP requests from
the local bridge on behalf of remote
<ulink url="https://en.wikipedia.org/wiki/Distributed_Overlay_Virtual_Ethernet">
Distributed Overlay Virtual Ethernet (DOVE)</ulink>
clients. Defaults to false.</para>
<xi:include href="version-info.xml" xpointer="v233"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>L2MissNotification=</varname></term>
<listitem>
<para>Takes a boolean. When true, enables netlink LLADDR miss
notifications.</para>
<xi:include href="version-info.xml" xpointer="v218"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>L3MissNotification=</varname></term>
<listitem>
<para>Takes a boolean. When true, enables netlink IP address miss notifications.</para>
<xi:include href="version-info.xml" xpointer="v218"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>RouteShortCircuit=</varname></term>
<listitem>
<para>Takes a boolean. When true, route short circuiting is turned
on.</para>
<xi:include href="version-info.xml" xpointer="v218"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UDPChecksum=</varname></term>
<listitem>
<para>Takes a boolean. When true, transmitting UDP checksums when doing VXLAN/IPv4 is turned on.</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UDP6ZeroChecksumTx=</varname></term>
<listitem>
<para>Takes a boolean. When true, sending zero checksums in VXLAN/IPv6 is turned on.</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UDP6ZeroChecksumRx=</varname></term>
<listitem>
<para>Takes a boolean. When true, receiving zero checksums in VXLAN/IPv6 is turned on.</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>RemoteChecksumTx=</varname></term>
<listitem>
<para>Takes a boolean. When true, remote transmit checksum offload of VXLAN is turned on.</para>
<xi:include href="version-info.xml" xpointer="v232"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>RemoteChecksumRx=</varname></term>
<listitem>
<para>Takes a boolean. When true, remote receive checksum offload in VXLAN is turned on.</para>
<xi:include href="version-info.xml" xpointer="v232"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>GroupPolicyExtension=</varname></term>
<listitem>
<para>Takes a boolean. When true, it enables Group Policy VXLAN extension security label mechanism
across network peers based on VXLAN. For details about the Group Policy VXLAN, see the
<ulink url="https://tools.ietf.org/html/draft-smith-vxlan-group-policy">
VXLAN Group Policy </ulink> document. Defaults to false.</para>
<xi:include href="version-info.xml" xpointer="v224"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>GenericProtocolExtension=</varname></term>
<listitem>
<para>Takes a boolean. When true, Generic Protocol Extension extends the existing VXLAN protocol
to provide protocol typing, OAM, and versioning capabilities. For details about the VXLAN GPE
Header, see the <ulink url="https://tools.ietf.org/html/draft-ietf-nvo3-vxlan-gpe-07">
Generic Protocol Extension for VXLAN </ulink> document. If destination port is not specified and
Generic Protocol Extension is set then default port of 4790 is used. Defaults to false.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>DestinationPort=</varname></term>
<listitem>
<para>Configures the default destination UDP port. If the destination port is not specified then
Linux kernel default will be used. Set to 4789 to get the IANA assigned value.</para>
<xi:include href="version-info.xml" xpointer="v229"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PortRange=</varname></term>
<listitem>
<para>Configures the source port range for the VXLAN. The kernel assigns the source UDP port based
on the flow to help the receiver to do load balancing. When this option is not set, the normal
range of local UDP ports is used.</para>
<xi:include href="version-info.xml" xpointer="v229"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>FlowLabel=</varname></term>
<listitem>
<para>Specifies the flow label to use in outgoing packets.
The valid range is 0-1048575.
</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>IPDoNotFragment=</varname></term>
<listitem>
<para>Allows setting the IPv4 Do not Fragment (DF) bit in outgoing packets, or to inherit its
value from the IPv4 inner header. Takes a boolean value, or <literal>inherit</literal>. Set
to <literal>inherit</literal> if the encapsulated protocol is IPv6. When unset, the kernel's
default will be used.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Independent=</varname></term>
<listitem>
<para>Takes a boolean. When true, the vxlan interface is created without any underlying network
interface. Defaults to false, which means that a .network file that requests this VXLAN interface
using <varname>VXLAN=</varname> is required for the VXLAN to be created.</para>
<xi:include href="version-info.xml" xpointer="v247"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[GENEVE] Section Options</title>
<para>The [GENEVE] section only applies for
netdevs of kind <literal>geneve</literal>, and accepts the
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Id=</varname></term>
<listitem>
<para>Specifies the Virtual Network Identifier (VNI) to use, a number between 0 and 16777215. This
field is mandatory.</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Remote=</varname></term>
<listitem>
<para>Specifies the unicast destination IP address to use in outgoing packets.</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>TOS=</varname></term>
<listitem>
<para>Specifies the TOS value to use in outgoing packets. Takes a number between 1 and 255.</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>TTL=</varname></term>
<listitem>
<para>Accepts the same values as in the [VXLAN] section, except that when unset
or set to 0, the kernel's default will be used, meaning that packet TTL will be set from
<filename>/proc/sys/net/ipv4/ip_default_ttl</filename>.</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UDPChecksum=</varname></term>
<listitem>
<para>Takes a boolean. When true, specifies that UDP checksum is calculated for transmitted packets
over IPv4.</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UDP6ZeroChecksumTx=</varname></term>
<listitem>
<para>Takes a boolean. When true, skip UDP checksum calculation for transmitted packets over IPv6.</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UDP6ZeroChecksumRx=</varname></term>
<listitem>
<para>Takes a boolean. When true, allows incoming UDP packets over IPv6 with zero checksum field.</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>DestinationPort=</varname></term>
<listitem>
<para>Specifies destination port. Defaults to 6081. If not set or assigned the empty string, the default
port of 6081 is used.</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>FlowLabel=</varname></term>
<listitem>
<para>Specifies the flow label to use in outgoing packets.</para>
<xi:include href="version-info.xml" xpointer="v234"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>IPDoNotFragment=</varname></term>
<listitem>
<para>Accepts the same key as in [VXLAN] section.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>InheritInnerProtocol=</varname></term>
<listitem>
<para>Takes a boolean. When true, inner Layer 3 protocol is set as Protocol Type in the GENEVE
header instead of Ethernet. Defaults to false.</para>
<xi:include href="version-info.xml" xpointer="v254"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[BareUDP] Section Options</title>
<para>The [BareUDP] section only applies for
netdevs of kind <literal>bareudp</literal>, and accepts the
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>DestinationPort=</varname></term>
<listitem>
<para>Specifies the destination UDP port (in range 1…65535). This is mandatory.</para>
<xi:include href="version-info.xml" xpointer="v247"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>EtherType=</varname></term>
<listitem>
<para>Specifies the L3 protocol. Takes one of <literal>ipv4</literal>, <literal>ipv6</literal>, <literal>mpls-uc</literal>
or <literal>mpls-mc</literal>. This is mandatory.</para>
<xi:include href="version-info.xml" xpointer="v247"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[L2TP] Section Options</title>
<para>The [L2TP] section only applies for
netdevs of kind <literal>l2tp</literal>, and accepts the
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>TunnelId=</varname></term>
<listitem>
<para>Specifies the tunnel identifier. Takes an number in the range 1…4294967295. The value used
must match the <literal>PeerTunnelId=</literal> value being used at the peer. This setting is
compulsory.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PeerTunnelId=</varname></term>
<listitem>
<para>Specifies the peer tunnel id. Takes a number in the range 1…4294967295. The value used must
match the <literal>TunnelId=</literal> value being used at the peer. This setting is compulsory.
</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Remote=</varname></term>
<listitem>
<para>Specifies the IP address of the remote peer. This setting is compulsory.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Local=</varname></term>
<listitem>
<para>Specifies the IP address of a local interface. Takes an IP address, or the special
values <literal>auto</literal>, <literal>static</literal>, or <literal>dynamic</literal>.
Optionally a name of a local interface can be specified after <literal>@</literal>, e.g.
<literal>192.168.0.1@eth0</literal> or <literal>auto@eth0</literal>. When an address is
specified, then a local or specified interface must have the address, and the remote address
must be accessible through the local address. If <literal>auto</literal>, then one of the
addresses on a local or specified interface which is accessible to the remote address will be
used. Similarly, if <literal>static</literal> or <literal>dynamic</literal> is set, then one
of the static or dynamic addresses will be used. Defaults to <literal>auto</literal>.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>EncapsulationType=</varname></term>
<listitem>
<para>Specifies the encapsulation type of the tunnel. Takes one of <literal>udp</literal> or
<literal>ip</literal>.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UDPSourcePort=</varname></term>
<listitem>
<para>Specifies the UDP source port to be used for the tunnel. When UDP encapsulation is selected
it's mandatory. Ignored when IP encapsulation is selected.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UDPDestinationPort=</varname></term>
<listitem>
<para>Specifies destination port. When UDP encapsulation is selected it's mandatory. Ignored when IP
encapsulation is selected.</para>
<xi:include href="version-info.xml" xpointer="v245"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UDPChecksum=</varname></term>
<listitem>
<para>Takes a boolean. When true, specifies that UDP checksum is calculated for transmitted packets
over IPv4.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UDP6ZeroChecksumTx=</varname></term>
<listitem>
<para>Takes a boolean. When true, skip UDP checksum calculation for transmitted packets over IPv6.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UDP6ZeroChecksumRx=</varname></term>
<listitem>
<para>Takes a boolean. When true, allows incoming UDP packets over IPv6 with zero checksum field.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[L2TPSession] Section Options</title>
<para>The [L2TPSession] section only applies for
netdevs of kind <literal>l2tp</literal>, and accepts the
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Name=</varname></term>
<listitem>
<para>Specifies the name of the session. This setting is compulsory.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>SessionId=</varname></term>
<listitem>
<para>Specifies the session identifier. Takes an number in the range 1…4294967295. The value used
must match the <literal>SessionId=</literal> value being used at the peer. This setting is
compulsory.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PeerSessionId=</varname></term>
<listitem>
<para>Specifies the peer session identifier. Takes an number in the range 1…4294967295.
The value used must match the <literal>PeerSessionId=</literal> value being used at the peer.
This setting is compulsory.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Layer2SpecificHeader=</varname></term>
<listitem>
<para>Specifies layer2specific header type of the session. One of <literal>none</literal> or <literal>default</literal>. Defaults to <literal>default</literal>.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[MACsec] Section Options</title>
<para>The [MACsec] section only applies for network devices of kind
<literal>macsec</literal>, and accepts the following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Port=</varname></term>
<listitem>
<para>Specifies the port to be used for the MACsec transmit channel. The port is used to make
secure channel identifier (SCI). Takes a value between 1 and 65535. Defaults to unset.
</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Encrypt=</varname></term>
<listitem>
<para>Takes a boolean. When true, enable encryption. Defaults to unset.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[MACsecReceiveChannel] Section Options</title>
<para>The [MACsecReceiveChannel] section only applies for network devices of
kind <literal>macsec</literal>, and accepts the following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Port=</varname></term>
<listitem>
<para>Specifies the port to be used for the MACsec receive channel. The port is used to make
secure channel identifier (SCI). Takes a value between 1 and 65535. This option is
compulsory, and is not set by default.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MACAddress=</varname></term>
<listitem>
<para>Specifies the MAC address to be used for the MACsec receive channel. The MAC address
used to make secure channel identifier (SCI). This setting is compulsory, and is not set by
default.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[MACsecTransmitAssociation] Section Options</title>
<para>The [MACsecTransmitAssociation] section only applies for network devices
of kind <literal>macsec</literal>, and accepts the following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>PacketNumber=</varname></term>
<listitem>
<para>Specifies the packet number to be used for replay protection and the construction of
the initialization vector (along with the secure channel identifier [SCI]). Takes a value
between 1-4,294,967,295. Defaults to unset.
</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>KeyId=</varname></term>
<listitem>
<para>Specifies the identification for the key. Takes a number between 0-255. This option
is compulsory, and is not set by default.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Key=</varname></term>
<listitem>
<para>Specifies the encryption key used in the transmission channel. The same key must be
configured on the peer’s matching receive channel. This setting is compulsory, and is not set
by default. Takes a 128-bit key encoded in a hexadecimal string, for example
<literal>dffafc8d7b9a43d5b9a3dfbbf6a30c16</literal>.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>KeyFile=</varname></term>
<listitem>
<para>Takes an absolute path to a file which contains a 128-bit key encoded in a hexadecimal string,
which will be used in the transmission channel. When this option is specified,
<varname>Key=</varname> is ignored. Note that the file must be readable by the user
<literal>systemd-network</literal>, so it should be, e.g., owned by
<literal>root:systemd-network</literal> with a <literal>0640</literal> file mode. If the path
refers to an <constant>AF_UNIX</constant> stream socket in the file system a connection is made to
it and the key read from it.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Activate=</varname></term>
<listitem>
<para>Takes a boolean. If enabled, then the security association is activated. Defaults to
unset.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UseForEncoding=</varname></term>
<listitem>
<para>Takes a boolean. If enabled, then the security association is used for encoding. Only
one [MACsecTransmitAssociation] section can enable this option. When enabled,
<varname>Activate=yes</varname> is implied. Defaults to unset.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[MACsecReceiveAssociation] Section Options</title>
<para>The [MACsecReceiveAssociation] section only applies for
network devices of kind <literal>macsec</literal>, and accepts the
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Port=</varname></term>
<listitem>
<para>Accepts the same key as in [MACsecReceiveChannel] section.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MACAddress=</varname></term>
<listitem>
<para>Accepts the same key as in [MACsecReceiveChannel] section.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PacketNumber=</varname></term>
<listitem>
<para>Accepts the same key as in [MACsecTransmitAssociation] section.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>KeyId=</varname></term>
<listitem>
<para>Accepts the same key as in [MACsecTransmitAssociation] section.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Key=</varname></term>
<listitem>
<para>Accepts the same key as in [MACsecTransmitAssociation] section.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>KeyFile=</varname></term>
<listitem>
<para>Accepts the same key as in [MACsecTransmitAssociation] section.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Activate=</varname></term>
<listitem>
<para>Accepts the same key as in [MACsecTransmitAssociation] section.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[Tunnel] Section Options</title>
<para>The [Tunnel] section only applies for
netdevs of kind
<literal>ipip</literal>,
<literal>sit</literal>,
<literal>gre</literal>,
<literal>gretap</literal>,
<literal>ip6gre</literal>,
<literal>ip6gretap</literal>,
<literal>vti</literal>,
<literal>vti6</literal>,
<literal>ip6tnl</literal>, and
<literal>erspan</literal> and accepts
the following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>External=</varname></term>
<listitem>
<para>Takes a boolean value. When true, then the tunnel is externally controlled, which is
also known as collect metadata mode, and most settings below like <varname>Local=</varname>
or <varname>Remote=</varname> are ignored. This implies <varname>Independent=</varname>.
Defaults to false.</para>
<xi:include href="version-info.xml" xpointer="v251"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Local=</varname></term>
<listitem>
<para>A static local address for tunneled packets. It must be an address on another interface
of this host, or one of the special values <literal>any</literal>,
<literal>ipv4_link_local</literal>, <literal>ipv6_link_local</literal>,
<literal>dhcp4</literal>, <literal>dhcp6</literal>, and <literal>slaac</literal>. If one
of the special values except for <literal>any</literal> is specified, an address which
matches the corresponding type on the underlying interface will be used. Defaults to
<literal>any</literal>.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Remote=</varname></term>
<listitem>
<para>The remote endpoint of the tunnel. Takes an IP address or the special value
<literal>any</literal>.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>TOS=</varname></term>
<listitem>
<para>The Type Of Service byte value for a tunnel interface.
For details about the TOS, see the
<ulink url="http://tools.ietf.org/html/rfc1349"> Type of
Service in the Internet Protocol Suite </ulink> document.
</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>TTL=</varname></term>
<listitem>
<para>A fixed Time To Live N on tunneled packets. N is a
number in the range 1…255. 0 is a special value meaning that
packets inherit the TTL value. The default value for IPv4
tunnels is 0 (inherit). The default value for IPv6 tunnels is
64.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>DiscoverPathMTU=</varname></term>
<listitem>
<para>Takes a boolean. When true, enables Path MTU Discovery on
the tunnel.
When <varname>IgnoreDontFragment=</varname> is enabled,
defaults to false. Otherwise, defaults to true.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>IgnoreDontFragment=</varname></term>
<listitem>
<para>Takes a boolean. When true, enables IPv4 Don't Fragment (DF) suppression on
the tunnel. Defaults to false.
Note that if <varname>IgnoreDontFragment=</varname> is set to true,
<varname>DiscoverPathMTU=</varname> cannot be set to true.
Only applicable to GRE, GRETAP, and ERSPAN tunnels.</para>
<xi:include href="version-info.xml" xpointer="v254"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>IPv6FlowLabel=</varname></term>
<listitem>
<para>Configures the 20-bit flow label (see <ulink url="https://tools.ietf.org/html/rfc6437">
RFC 6437</ulink>) field in the IPv6 header (see <ulink url="https://tools.ietf.org/html/rfc2460">
RFC 2460</ulink>), which is used by a node to label packets of a flow.
It is only used for IPv6 tunnels.
A flow label of zero is used to indicate packets that have
not been labeled.
It can be configured to a value in the range 0…0xFFFFF, or be
set to <literal>inherit</literal>, in which case the original flowlabel is used.</para>
<xi:include href="version-info.xml" xpointer="v223"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>CopyDSCP=</varname></term>
<listitem>
<para>Takes a boolean. When true, the Differentiated Service Code
Point (DSCP) field will be copied to the inner header from
outer header during the decapsulation of an IPv6 tunnel
packet. DSCP is a field in an IP packet that enables different
levels of service to be assigned to network traffic.
Defaults to <literal>no</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v223"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>EncapsulationLimit=</varname></term>
<listitem>
<para>The Tunnel Encapsulation Limit option specifies how many additional
levels of encapsulation are permitted to be prepended to the packet.
For example, a Tunnel Encapsulation Limit option containing a limit
value of zero means that a packet carrying that option may not enter
another tunnel before exiting the current tunnel.
(see <ulink url="https://tools.ietf.org/html/rfc2473#section-4.1.1"> RFC 2473</ulink>).
The valid range is 0…255 and <literal>none</literal>. Defaults to 4.
</para>
<xi:include href="version-info.xml" xpointer="v226"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Key=</varname></term>
<listitem>
<para>The <varname>Key=</varname> parameter specifies the same key to use in
both directions (<varname>InputKey=</varname> and <varname>OutputKey=</varname>).
The <varname>Key=</varname> is either a number or an IPv4 address-like dotted quad.
It is used as mark-configured SAD/SPD entry as part of the lookup key (both in data
and control path) in IP XFRM (framework used to implement IPsec protocol).
See <ulink url="https://man7.org/linux/man-pages/man8/ip-xfrm.8.html">
ip-xfrm — transform configuration</ulink> for details. It is only used for VTI/VTI6,
GRE, GRETAP, and ERSPAN tunnels.</para>
<xi:include href="version-info.xml" xpointer="v231"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>InputKey=</varname></term>
<listitem>
<para>The <varname>InputKey=</varname> parameter specifies the key to use for input.
The format is same as <varname>Key=</varname>. It is only used for VTI/VTI6, GRE, GRETAP,
and ERSPAN tunnels.</para>
<xi:include href="version-info.xml" xpointer="v231"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>OutputKey=</varname></term>
<listitem>
<para>The <varname>OutputKey=</varname> parameter specifies the key to use for output.
The format is same as <varname>Key=</varname>. It is only used for VTI/VTI6, GRE, GRETAP,
and ERSPAN tunnels.</para>
<xi:include href="version-info.xml" xpointer="v231"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Mode=</varname></term>
<listitem>
<para>An <literal>ip6tnl</literal> tunnel can be in one of three
modes
<literal>ip6ip6</literal> for IPv6 over IPv6,
<literal>ipip6</literal> for IPv4 over IPv6 or
<literal>any</literal> for either.
</para>
<xi:include href="version-info.xml" xpointer="v219"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Independent=</varname></term>
<listitem>
<para>Takes a boolean. When false (the default), the tunnel is always created over some network
device, and a .network file that requests this tunnel using <varname>Tunnel=</varname> is required
for the tunnel to be created. When true, the tunnel is created independently of any network as
"tunnel@NONE".</para>
<xi:include href="version-info.xml" xpointer="v235"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>AssignToLoopback=</varname></term>
<listitem>
<para>Takes a boolean. If set to <literal>yes</literal>, the loopback interface <literal>lo</literal>
is used as the underlying device of the tunnel interface. Defaults to <literal>no</literal>.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>AllowLocalRemote=</varname></term>
<listitem>
<para>Takes a boolean. When true allows tunnel traffic on <varname>ip6tnl</varname> devices where the remote endpoint is a local host address.
When unset, the kernel's default will be used.
</para>
<xi:include href="version-info.xml" xpointer="v237"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>FooOverUDP=</varname></term>
<listitem>
<para>Takes a boolean. Specifies whether <varname>FooOverUDP=</varname> tunnel is to be configured.
Defaults to false. This takes effects only for IPIP, SIT, GRE, and GRETAP tunnels.
For more detail information see
<ulink url="https://lwn.net/Articles/614348">Foo over UDP</ulink></para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>FOUDestinationPort=</varname></term>
<listitem>
<para>This setting specifies the UDP destination port for encapsulation.
This field is mandatory when <varname>FooOverUDP=yes</varname>, and is not set by default.</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>FOUSourcePort=</varname></term>
<listitem>
<para>This setting specifies the UDP source port for encapsulation. Defaults to <constant>0</constant>
— that is, the source port for packets is left to the network stack to decide.</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Encapsulation=</varname></term>
<listitem>
<para>Accepts the same key as in the [FooOverUDP] section.</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>IPv6RapidDeploymentPrefix=</varname></term>
<listitem>
<para>Reconfigure the tunnel for <ulink url="https://tools.ietf.org/html/rfc5569">IPv6 Rapid
Deployment</ulink>, also known as 6rd. The value is an ISP-specific IPv6 prefix with a non-zero length. Only
applicable to SIT tunnels.</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ISATAP=</varname></term>
<listitem>
<para>Takes a boolean. If set, configures the tunnel as Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) tunnel.
Only applicable to SIT tunnels. When unset, the kernel's default will be used.</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>SerializeTunneledPackets=</varname></term>
<listitem>
<para>Takes a boolean. If set to yes, then packets are serialized. Only applies for GRE,
GRETAP, and ERSPAN tunnels. When unset, the kernel's default will be used.
</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ERSPANVersion=</varname></term>
<listitem>
<para>Specifies the ERSPAN version number. Takes 0 for version 0 (a.k.a. type I), 1 for version 1
(a.k.a. type II), or 2 for version 2 (a.k.a. type III). Defaults to 1.</para>
<xi:include href="version-info.xml" xpointer="v252"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ERSPANIndex=</varname></term>
<listitem>
<para>Specifies the ERSPAN v1 index field for the interface. Takes an integer in the range
0…1048575, which is associated with the ERSPAN traffic's source port and direction. Only used when
<varname>ERSPANVersion=1</varname>. Defaults to 0.</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ERSPANDirection=</varname></term>
<listitem>
<para>Specifies the ERSPAN v2 mirrored traffic's direction. Takes <literal>ingress</literal> or
<literal>egress</literal>. Only used when <varname>ERSPANVersion=2</varname>. Defaults to
<literal>ingress</literal>.</para>
<xi:include href="version-info.xml" xpointer="v252"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ERSPANHardwareId=</varname></term>
<listitem>
<para>Specifies an unique identifier of the ERSPAN v2 engine. Takes an integer in the range 0…63.
Only used when <varname>ERSPANVersion=2</varname>. Defaults to 0.</para>
<xi:include href="version-info.xml" xpointer="v252"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[FooOverUDP] Section Options</title>
<para>The [FooOverUDP] section only applies for
netdevs of kind <literal>fou</literal> and accepts the
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Encapsulation=</varname></term>
<listitem>
<para>Specifies the encapsulation mechanism used to store networking packets of various protocols
inside the UDP packets. Supports the following values:
<literal>FooOverUDP</literal> provides the simplest no-frills model of UDP encapsulation, it simply
encapsulates packets directly in the UDP payload. <literal>GenericUDPEncapsulation</literal> is a
generic and extensible encapsulation, it allows encapsulation of packets for any IP protocol and
optional data as part of the encapsulation. For more detailed information see <ulink
url="https://lwn.net/Articles/615044">Generic UDP Encapsulation</ulink>. Defaults to
<literal>FooOverUDP</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Port=</varname></term>
<listitem>
<para>Specifies the port number where the encapsulated packets will arrive. Those packets will be
removed and manually fed back into the network stack with the encapsulation removed to be sent to
the real destination. This option is mandatory.</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PeerPort=</varname></term>
<listitem>
<para>Specifies the peer port number. Defaults to unset. Note that when peer port is set
<literal>Peer=</literal> address is mandatory.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Protocol=</varname></term>
<listitem>
<para>The <varname>Protocol=</varname> specifies the protocol number of the packets arriving
at the UDP port. When <varname>Encapsulation=FooOverUDP</varname>, this field is mandatory
and is not set by default. Takes an IP protocol name such as <literal>gre</literal> or
<literal>ipip</literal>, or an integer within the range 1…255. When
<varname>Encapsulation=GenericUDPEncapsulation</varname>, this must not be specified.</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Peer=</varname></term>
<listitem>
<para>Configures peer IP address. Note that when peer address is set <literal>PeerPort=</literal>
is mandatory.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Local=</varname></term>
<listitem>
<para>Configures local IP address.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[Peer] Section Options</title>
<para>The [Peer] section only applies for
netdevs of kind <literal>veth</literal> and accepts the
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Name=</varname></term>
<listitem>
<para>The interface name used when creating the netdev.
This setting is compulsory.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MACAddress=</varname></term>
<listitem>
<para>The peer MACAddress, if not set, it is generated in
the same way as the MAC address of the main
interface.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[VXCAN] Section Options</title>
<para>The [VXCAN] section only applies for
netdevs of kind <literal>vxcan</literal> and accepts the
following key:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Peer=</varname></term>
<listitem>
<para>The peer interface name used when creating the netdev.
This setting is compulsory.</para>
<xi:include href="version-info.xml" xpointer="v236"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[Tun] Section Options</title>
<para>The [Tun] section only applies for
netdevs of kind <literal>tun</literal>, and accepts the following
keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>MultiQueue=</varname></term>
<listitem><para>Takes a boolean. Configures whether
to use multiple file descriptors (queues) to parallelize
packets sending and receiving. Defaults to
<literal>no</literal>.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PacketInfo=</varname></term>
<listitem><para>Takes a boolean. Configures whether
packets should be prepended with four extra bytes (two flag
bytes and two protocol bytes). If disabled, it indicates that
the packets will be pure IP packets. Defaults to
<literal>no</literal>.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>VNetHeader=</varname></term>
<listitem><para>Takes a boolean. Configures
IFF_VNET_HDR flag for a tun or tap device. It allows sending
and receiving larger Generic Segmentation Offload (GSO)
packets. This may increase throughput significantly.
Defaults to
<literal>no</literal>.</para>
<xi:include href="version-info.xml" xpointer="v223"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>User=</varname></term>
<listitem><para>User to grant access to the
<filename>/dev/net/tun</filename> device.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Group=</varname></term>
<listitem><para>Group to grant access to the
<filename>/dev/net/tun</filename> device.</para>
<xi:include href="version-info.xml" xpointer="v215"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>KeepCarrier=</varname></term>
<listitem>
<para>Takes a boolean. If enabled, to make the interface maintain its carrier status, the file
descriptor of the interface is kept open. This may be useful to keep the interface in running
state, for example while the backing process is temporarily shutdown. Defaults to
<literal>no</literal>.</para>
<xi:include href="version-info.xml" xpointer="v252"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[Tap] Section Options</title>
<para>The [Tap] section only applies for
netdevs of kind <literal>tap</literal>, and accepts the same keys
as the [Tun] section.</para>
</refsect1>
<refsect1>
<title>[WireGuard] Section Options</title>
<para>The [WireGuard] section accepts the following
keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>PrivateKey=</varname></term>
<listitem>
<para>The Base64 encoded private key for the interface. It can be generated using
the <command>wg genkey</command> command
(see <citerefentry project='man-pages'><refentrytitle>wg</refentrytitle><manvolnum>8</manvolnum></citerefentry>).
Specially, if the specified key is prefixed with <literal>@</literal>, it is interpreted as
the name of the credential from which the actual key shall be read.
<citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
automatically imports credentials matching <literal>network.wireguard.*</literal>. For more details
on credentials, refer to
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
A private key is mandatory to use WireGuard. If not set, the credential
<literal>network.wireguard.private.<replaceable>netdev</replaceable></literal> is used if exists.
I.e. for <filename>50-foobar.netdev</filename>, <literal>network.wireguard.private.50-foobar</literal>
is tried.</para>
<para>Note that because this information is secret, it's strongly recommended to use an (encrypted)
credential. Alternatively, you may want to set the permissions of the .netdev file to be owned
by <literal>root:systemd-network</literal> with a <literal>0640</literal> file mode.</para>
<xi:include href="version-info.xml" xpointer="v237"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PrivateKeyFile=</varname></term>
<listitem>
<para>Takes an absolute path to a file which contains the Base64 encoded private key for the
interface. When this option is specified, then <varname>PrivateKey=</varname> is ignored. Note
that the file must be readable by the user <literal>systemd-network</literal>, so it should be,
e.g., owned by <literal>root:systemd-network</literal> with a <literal>0640</literal> file mode. If
the path refers to an <constant>AF_UNIX</constant> stream socket in the file system a connection is
made to it and the key read from it.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ListenPort=</varname></term>
<listitem>
<para>Sets UDP port for listening. Takes either value between 1 and 65535
or <literal>auto</literal>. If <literal>auto</literal> is specified,
the port is automatically generated based on interface name.
Defaults to <literal>auto</literal>.</para>
<xi:include href="version-info.xml" xpointer="v237"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>FirewallMark=</varname></term>
<listitem>
<para>Sets a firewall mark on outgoing WireGuard packets from this interface. Takes a number between 1 and 4294967295.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>RouteTable=</varname></term>
<listitem>
<para>The table identifier for the routes to the addresses specified in the
<varname>AllowedIPs=</varname>. Takes a negative boolean value, one of the predefined names
<literal>default</literal>, <literal>main</literal>, and <literal>local</literal>, names
defined in <varname>RouteTable=</varname> in
<citerefentry><refentrytitle>networkd.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
or a number in the range 1…4294967295. When <literal>off</literal> the routes to the
addresses specified in the <varname>AllowedIPs=</varname> setting will not be configured.
Defaults to false. This setting will be ignored when the same setting is specified in the
[WireGuardPeer] section.</para>
<xi:include href="version-info.xml" xpointer="v250"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>RouteMetric=</varname></term>
<listitem>
<para>The priority of the routes to the addresses specified in the
<varname>AllowedIPs=</varname>. Takes an integer in the range 0…4294967295. Defaults to 0
for IPv4 addresses, and 1024 for IPv6 addresses. This setting will be ignored when the same
setting is specified in the [WireGuardPeer] section.</para>
<xi:include href="version-info.xml" xpointer="v250"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[WireGuardPeer] Section Options</title>
<para>The [WireGuardPeer] section accepts the following
keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>PublicKey=</varname></term>
<listitem>
<para>Sets a Base64 encoded public key calculated by <command>wg pubkey</command>
(see <citerefentry project='man-pages'><refentrytitle>wg</refentrytitle><manvolnum>8</manvolnum></citerefentry>)
from a private key, and usually transmitted out of band to the author of the configuration file.
This option honors the <literal>@</literal> prefix in the same way as the <option>PrivateKey=</option>
setting of the <option>[WireGuard]</option> section. This option is mandatory for this section.</para>
<xi:include href="version-info.xml" xpointer="v237"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PresharedKey=</varname></term>
<listitem>
<para>Optional preshared key for the interface. It can be generated by the <command>wg genpsk</command>
command. This option adds an additional layer of symmetric-key cryptography to be mixed into the
already existing public-key cryptography, for post-quantum resistance.
This option honors the <literal>@</literal> prefix in the same way as the <option>PrivateKey=</option>
setting of the <option>[WireGuard]</option> section.</para>
<para>Note that because this information is secret, it's strongly recommended to use an (encrypted)
credential. Alternatively, you may want to set the permissions of the .netdev file to be owned
by <literal>root:systemd-network</literal> with a <literal>0640</literal> file mode.</para>
<xi:include href="version-info.xml" xpointer="v237"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PresharedKeyFile=</varname></term>
<listitem>
<para>Takes an absolute path to a file which contains the Base64 encoded preshared key for the
peer. When this option is specified, then <varname>PresharedKey=</varname> is ignored. Note that
the file must be readable by the user <literal>systemd-network</literal>, so it should be, e.g.,
owned by <literal>root:systemd-network</literal> with a <literal>0640</literal> file mode. If the
path refers to an <constant>AF_UNIX</constant> stream socket in the file system a connection is
made to it and the key read from it.</para>
<xi:include href="version-info.xml" xpointer="v242"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>AllowedIPs=</varname></term>
<listitem>
<para>Sets a comma-separated list of IP (v4 or v6) addresses with CIDR masks from which this peer
is allowed to send incoming traffic and to which outgoing traffic for this peer is directed. This
setting can be specified multiple times. If an empty string is assigned, then the all previous
assignments are cleared.</para>
<para>The catch-all 0.0.0.0/0 may be specified for matching all IPv4 addresses,
and ::/0 may be specified for matching all IPv6 addresses.</para>
<para>Note that this only affects <emphasis>routing inside the network interface itself</emphasis>,
i.e. the packets that pass through the tunnel itself. To cause packets to be sent via the tunnel in
the first place, an appropriate route needs to be added as well — either in the
<literal>[Routes]</literal> section on the <literal>.network</literal> matching the wireguard
interface, or externally to <command>systemd-networkd</command>.</para>
<xi:include href="version-info.xml" xpointer="v237"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Endpoint=</varname></term>
<listitem>
<para>Sets an endpoint IP address or hostname, followed by a colon, and then a port number.
IPv6 address must be in the square brackets. For example, <literal>111.222.333.444:51820</literal>
for IPv4 and <literal>[1111:2222::3333]:51820</literal> for IPv6 address. This endpoint will be
updated automatically once to the most recent source IP address and port of correctly
authenticated packets from the peer at configuration time.</para>
<para>This option honors the <literal>@</literal> prefix in the same way as the <option>PrivateKey=</option>
setting of the <option>[WireGuard]</option> section.</para>
<xi:include href="version-info.xml" xpointer="v237"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PersistentKeepalive=</varname></term>
<listitem>
<para>Sets a seconds interval, between 1 and 65535 inclusive, of how often
to send an authenticated empty packet to the peer for the purpose
of keeping a stateful firewall or NAT mapping valid persistently.
For example, if the interface very rarely sends traffic, but it
might at anytime receive traffic from a peer, and it is behind NAT,
the interface might benefit from having a persistent keepalive
interval of 25 seconds. If set to 0 or "off", this option is
disabled. By default or when unspecified, this option is off.
Most users will not need this.</para>
<xi:include href="version-info.xml" xpointer="v237"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>RouteTable=</varname></term>
<listitem>
<para>The table identifier for the routes to the addresses specified in the
<varname>AllowedIPs=</varname>. Takes a negative boolean value, one of the predefined names
<literal>default</literal>, <literal>main</literal>, and <literal>local</literal>, names
defined in <varname>RouteTable=</varname> in
<citerefentry><refentrytitle>networkd.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
or a number in the range 1…4294967295. Defaults to unset, and the value specified in the
same setting in the [WireGuard] section will be used.</para>
<xi:include href="version-info.xml" xpointer="v250"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>RouteMetric=</varname></term>
<listitem>
<para>The priority of the routes to the addresses specified in the
<varname>AllowedIPs=</varname>. Takes an integer in the range 0…4294967295. Defaults to
unset, and the value specified in the same setting in the [WireGuard] section will be used.
</para>
<xi:include href="version-info.xml" xpointer="v250"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[Bond] Section Options</title>
<para>The [Bond] section accepts the following
key:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Mode=</varname></term>
<listitem>
<para>Specifies one of the bonding policies. The default is
<literal>balance-rr</literal> (round robin). Possible values are
<literal>balance-rr</literal>,
<literal>active-backup</literal>,
<literal>balance-xor</literal>,
<literal>broadcast</literal>,
<literal>802.3ad</literal>,
<literal>balance-tlb</literal>, and
<literal>balance-alb</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v216"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>TransmitHashPolicy=</varname></term>
<listitem>
<para>Selects the transmit hash policy to use for slave
selection in balance-xor, 802.3ad, and tlb modes. Possible
values are
<literal>layer2</literal>,
<literal>layer3+4</literal>,
<literal>layer2+3</literal>,
<literal>encap2+3</literal>, and
<literal>encap3+4</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v216"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>LACPTransmitRate=</varname></term>
<listitem>
<para>Specifies the rate with which link partner transmits
Link Aggregation Control Protocol Data Unit packets in
802.3ad mode. Possible values are <literal>slow</literal>,
which requests partner to transmit LACPDUs every 30 seconds,
and <literal>fast</literal>, which requests partner to
transmit LACPDUs every second. The default value is
<literal>slow</literal>.</para>
<xi:include href="version-info.xml" xpointer="v216"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MIIMonitorSec=</varname></term>
<listitem>
<para>Specifies the frequency that Media Independent
Interface link monitoring will occur. A value of zero
disables MII link monitoring. This value is rounded down to
the nearest millisecond. The default value is 0.</para>
<xi:include href="version-info.xml" xpointer="v216"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PeerNotifyDelaySec=</varname></term>
<listitem>
<para>Specifies the number of seconds the delay between each peer notification
(gratuitous ARP and unsolicited IPv6 Neighbor Advertisement) when they are issued
after a failover event. This delay should be a multiple of the MII link monitor
interval (miimon). The valid range is 0...300s. The default value is 0,
which means to match the value of the <varname>MIIMonitorSec=</varname>.</para>
<xi:include href="version-info.xml" xpointer="v256"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>UpDelaySec=</varname></term>
<listitem>
<para>Specifies the delay before a link is enabled after a
link up status has been detected. This value is rounded down
to a multiple of <varname>MIIMonitorSec=</varname>. The default value is
0.</para>
<xi:include href="version-info.xml" xpointer="v216"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>DownDelaySec=</varname></term>
<listitem>
<para>Specifies the delay before a link is disabled after a
link down status has been detected. This value is rounded
down to a multiple of <varname>MIIMonitorSec=</varname>. The default value is
0.</para>
<xi:include href="version-info.xml" xpointer="v216"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>LearnPacketIntervalSec=</varname></term>
<listitem>
<para>Specifies the number of seconds between instances where the bonding
driver sends learning packets to each slave peer switch.
The valid range is 1…0x7fffffff; the default value is 1. This option
has an effect only for the balance-tlb and balance-alb modes.</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>AdSelect=</varname></term>
<listitem>
<para>Specifies the 802.3ad aggregation selection logic to use. Possible values are
<literal>stable</literal>,
<literal>bandwidth</literal> and
<literal>count</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>AdActorSystemPriority=</varname></term>
<listitem>
<para>Specifies the 802.3ad actor system priority. Takes a number in the range 1…65535.</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>AdUserPortKey=</varname></term>
<listitem>
<para>Specifies the 802.3ad user defined portion of the port key. Takes a number in the range
0…1023.</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>AdActorSystem=</varname></term>
<listitem>
<para>Specifies the 802.3ad system MAC address. This cannot be a null or multicast address.
</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>FailOverMACPolicy=</varname></term>
<listitem>
<para>Specifies whether the active-backup mode should set all slaves to
the same MAC address at the time of enslavement or, when enabled, to perform special handling of the
bond's MAC address in accordance with the selected policy. The default policy is none.
Possible values are
<literal>none</literal>,
<literal>active</literal> and
<literal>follow</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ARPValidate=</varname></term>
<listitem>
<para>Specifies whether or not ARP probes and replies should be
validated in any mode that supports ARP monitoring, or whether
non-ARP traffic should be filtered (disregarded) for link
monitoring purposes. Possible values are
<literal>none</literal>,
<literal>active</literal>,
<literal>backup</literal> and
<literal>all</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ARPIntervalSec=</varname></term>
<listitem>
<para>Specifies the ARP link monitoring frequency. A value of 0 disables ARP monitoring. The
default value is 0, and the default unit seconds.
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ARPIPTargets=</varname></term>
<listitem>
<para>Specifies the IP addresses to use as ARP monitoring peers when
<varname>ARPIntervalSec=</varname> is greater than 0. These are the targets of the ARP
request sent to determine the health of the link to the targets.
Specify these values in IPv4 dotted decimal format. At least one IP
address must be given for ARP monitoring to function. The
maximum number of targets that can be specified is 16. The
default value is no IP addresses.
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ARPAllTargets=</varname></term>
<listitem>
<para>Specifies the quantity of <varname>ARPIPTargets=</varname> that must be reachable
in order for the ARP monitor to consider a slave as being up.
This option affects only active-backup mode for slaves with
ARPValidate enabled. Possible values are
<literal>any</literal> and
<literal>all</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PrimaryReselectPolicy=</varname></term>
<listitem>
<para>Specifies the reselection policy for the primary slave. This
affects how the primary slave is chosen to become the active slave
when failure of the active slave or recovery of the primary slave
occurs. This option is designed to prevent flip-flopping between
the primary slave and other slaves. Possible values are
<literal>always</literal>,
<literal>better</literal> and
<literal>failure</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ResendIGMP=</varname></term>
<listitem>
<para>Specifies the number of IGMP membership reports to be issued after
a failover event. One membership report is issued immediately after
the failover, subsequent packets are sent in each 200ms interval.
The valid range is 0…255. Defaults to 1. A value of 0
prevents the IGMP membership report from being issued in response
to the failover event.
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PacketsPerSlave=</varname></term>
<listitem>
<para>Specify the number of packets to transmit through a slave before
moving to the next one. When set to 0, then a slave is chosen at
random. The valid range is 0…65535. Defaults to 1. This option
only has effect when in balance-rr mode.
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>GratuitousARP=</varname></term>
<listitem>
<para>Specify the number of peer notifications (gratuitous ARPs and
unsolicited IPv6 Neighbor Advertisements) to be issued after a
failover event. As soon as the link is up on the new slave,
a peer notification is sent on the bonding device and each
VLAN sub-device. This is repeated at each link monitor interval
(ARPIntervalSec or MIIMonitorSec, whichever is active) if the number is
greater than 1. The valid range is 0…255. The default value is 1.
These options affect only the active-backup mode.
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>AllSlavesActive=</varname></term>
<listitem>
<para>Takes a boolean. Specifies that duplicate frames (received on inactive ports)
should be dropped when false, or delivered when true. Normally, bonding will drop
duplicate frames (received on inactive ports), which is desirable for
most users. But there are some times it is nice to allow duplicate
frames to be delivered. The default value is false (drop duplicate frames
received on inactive ports).
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>DynamicTransmitLoadBalancing=</varname></term>
<listitem>
<para>Takes a boolean. Specifies if dynamic shuffling of flows is enabled. Applies only
for balance-tlb mode. Defaults to unset.
</para>
<xi:include href="version-info.xml" xpointer="v240"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>MinLinks=</varname></term>
<listitem>
<para>Specifies the minimum number of links that must be active before
asserting carrier. The default value is 0.
</para>
<xi:include href="version-info.xml" xpointer="v220"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ARPMissedMax=</varname></term>
<listitem>
<para>Specify the maximum number of arp interval monitor cycle
for missed ARP replies. If this number is exceeded, link is reported as
down. Defaults to unset.
</para>
<xi:include href="version-info.xml" xpointer="v256"/>
</listitem>
</varlistentry>
</variablelist>
<para>For more detail information see
<ulink url="https://docs.kernel.org/networking/bonding.html">
Linux Ethernet Bonding Driver HOWTO</ulink></para>
</refsect1>
<refsect1>
<title>[Xfrm] Section Options</title>
<para>The [Xfrm] section accepts the following
keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>InterfaceId=</varname></term>
<listitem>
<para>Sets the ID/key of the xfrm interface which needs to be associated with a SA/policy.
Can be decimal or hexadecimal, valid range is 1-0xffffffff. This is mandatory.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Independent=</varname></term>
<listitem>
<para>Takes a boolean. If false (the default), the xfrm interface must have an underlying device
which can be used for hardware offloading.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
</variablelist>
<para>For more detail information see
<ulink url="https://lwn.net/Articles/757391">Virtual XFRM Interfaces</ulink>.</para>
</refsect1>
<refsect1>
<title>[VRF] Section Options</title>
<para>The [VRF] section only applies for
netdevs of kind <literal>vrf</literal> and accepts the
following key:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>Table=</varname></term>
<listitem>
<para>The numeric routing table identifier. This setting is compulsory.</para>
<xi:include href="version-info.xml" xpointer="v243"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[BatmanAdvanced] Section Options</title>
<para>The [BatmanAdvanced] section only applies for netdevs of kind <literal>batadv</literal> and accepts
the following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>GatewayMode=</varname></term>
<listitem>
<para>Takes one of <literal>off</literal>, <literal>server</literal>, or <literal>client</literal>.
A batman-adv node can either run in server mode (sharing its internet
connection with the mesh) or in client mode (searching for the most suitable internet connection
in the mesh) or having the gateway support turned off entirely (which is the default setting).
</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Aggregation=</varname></term>
<listitem>
<para>Takes a boolean value. Enables or disables aggregation of originator messages. Defaults to
true.
</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>BridgeLoopAvoidance=</varname></term>
<listitem>
<para>Takes a boolean value. Enables or disables avoidance of loops on bridges. Defaults to true.
</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>DistributedArpTable=</varname></term>
<listitem>
<para>Takes a boolean value. Enables or disables the distributed ARP table. Defaults to true.</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Fragmentation=</varname></term>
<listitem>
<para>Takes a boolean value. Enables or disables fragmentation. Defaults to true.</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>HopPenalty=</varname></term>
<listitem>
<para>The hop penalty setting allows one to modify
<citerefentry project='mankier'><refentrytitle>batctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>
preference for multihop routes vs. short routes. This integer value is applied to the
TQ (Transmit Quality) of each forwarded OGM (Originator Message), thereby propagating the
cost of an extra hop (the packet has to be received and retransmitted which costs airtime).
A higher hop penalty will make it more unlikely that other nodes will choose this node as
intermediate hop towards any given destination. The default hop penalty of '15' is a reasonable
value for most setups and probably does not need to be changed. However, mobile nodes could
choose a value of 255 (maximum value) to avoid being chosen as a router by other nodes.
The minimum value is 0.
</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>OriginatorIntervalSec=</varname></term>
<listitem>
<para>The value specifies the interval in seconds, unless another time unit is specified in which
batman-adv floods the network with its protocol information.
See <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for more information.</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>GatewayBandwidthDown=</varname></term>
<listitem>
<para>If the node is a server, this
parameter is used to inform other nodes in the network about
this node's internet connection download bandwidth in bits per second. Just enter any number
suffixed with K, M, G or T (base 1000) and the batman-adv
module will propagate the entered value in the mesh.</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>GatewayBandwidthUp=</varname></term>
<listitem>
<para>If the node is a server, this
parameter is used to inform other nodes in the network about
this node's internet connection upload bandwidth in bits per second. Just enter any number
suffixed with K, M, G or T (base 1000) and the batman-adv
module will propagate the entered value in the mesh.</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>RoutingAlgorithm=</varname></term>
<listitem>
<para>This can be either <literal>batman-v</literal> or <literal>batman-iv</literal> and describes which routing_algo
of <citerefentry project='mankier'><refentrytitle>batctl</refentrytitle><manvolnum>8</manvolnum></citerefentry> to use. The algorithm
cannot be changed after interface creation. Defaults to <literal>batman-v</literal>.
</para>
<xi:include href="version-info.xml" xpointer="v248"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[IPoIB] Section Options</title>
<para>The [IPoIB] section only applies for netdevs of kind <literal>ipoib</literal> and accepts the
following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>PartitionKey=</varname></term>
<listitem>
<para>Takes an integer in the range 1…0xffff, except for 0x8000. Defaults to unset, and the
kernel's default is used.</para>
<xi:include href="version-info.xml" xpointer="v250"/>
</listitem>
</varlistentry>
<varlistentry id='ipoib_mode'>
<term><varname>Mode=</varname></term>
<listitem>
<para>Takes one of the special values <literal>datagram</literal> or
<literal>connected</literal>. Defaults to unset, and the kernel's default is used.</para>
<para>When <literal>datagram</literal>, the Infiniband unreliable datagram (UD) transport is
used, and so the interface MTU is equal to the IB L2 MTU minus the IPoIB encapsulation
header (4 bytes). For example, in a typical IB fabric with a 2K MTU, the IPoIB MTU will be
2048 - 4 = 2044 bytes.</para>
<para>When <literal>connected</literal>, the Infiniband reliable connected (RC) transport is
used. Connected mode takes advantage of the connected nature of the IB transport and allows
an MTU up to the maximal IP packet size of 64K, which reduces the number of IP packets needed
for handling large UDP datagrams, TCP segments, etc and increases the performance for large
messages.</para>
<xi:include href="version-info.xml" xpointer="v250"/>
</listitem>
</varlistentry>
<varlistentry id='ipoib_umcast'>
<term><varname>IgnoreUserspaceMulticastGroup=</varname></term>
<listitem>
<para>Takes an boolean value. When true, the kernel ignores multicast groups handled by
userspace. Defaults to unset, and the kernel's default is used.</para>
<xi:include href="version-info.xml" xpointer="v250"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>[WLAN] Section Options</title>
<para>The [WLAN] section only applies to WLAN interfaces, and accepts the following keys:</para>
<variablelist class='network-directives'>
<varlistentry>
<term><varname>PhysicalDevice=</varname></term>
<listitem>
<para>Specifies the name or index of the physical WLAN device (e.g. <literal>0</literal> or
<literal>phy0</literal>). The list of the physical WLAN devices that exist on the host can be
obtained by <command>iw phy</command> command. This option is mandatory.</para>
<xi:include href="version-info.xml" xpointer="v251"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Type=</varname></term>
<listitem>
<para>Specifies the type of the interface. Takes one of the <literal>ad-hoc</literal>,
<literal>station</literal>, <literal>ap</literal>, <literal>ap-vlan</literal>,
<literal>wds</literal>, <literal>monitor</literal>, <literal>mesh-point</literal>,
<literal>p2p-client</literal>, <literal>p2p-go</literal>, <literal>p2p-device</literal>,
<literal>ocb</literal>, and <literal>nan</literal>. This option is mandatory.</para>
<xi:include href="version-info.xml" xpointer="v251"/>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>WDS=</varname></term>
<listitem>
<para>Enables the Wireless Distribution System (WDS) mode on the interface. The mode is also
known as the <literal>4 address mode</literal>. Takes a boolean value. Defaults to unset, and
the kernel's default will be used.</para>
<xi:include href="version-info.xml" xpointer="v251"/>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>Examples</title>
<example>
<title>/etc/systemd/network/25-bridge.netdev</title>
<programlisting>[NetDev]
Name=bridge0
Kind=bridge</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-vlan1.netdev</title>
<programlisting>[Match]
Virtualization=no
[NetDev]
Name=vlan1
Kind=vlan
[VLAN]
Id=1</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-ipip.netdev</title>
<programlisting>[NetDev]
Name=ipip-tun
Kind=ipip
MTUBytes=1480
[Tunnel]
Local=192.168.223.238
Remote=192.169.224.239
TTL=64</programlisting>
</example>
<example>
<title>/etc/systemd/network/1-fou-tunnel.netdev</title>
<programlisting>[NetDev]
Name=fou-tun
Kind=fou
[FooOverUDP]
Port=5555
Protocol=4
</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-fou-ipip.netdev</title>
<programlisting>[NetDev]
Name=ipip-tun
Kind=ipip
[Tunnel]
Independent=yes
Local=10.65.208.212
Remote=10.65.208.211
FooOverUDP=yes
FOUDestinationPort=5555
</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-tap.netdev</title>
<programlisting>[NetDev]
Name=tap-test
Kind=tap
[Tap]
MultiQueue=yes
PacketInfo=yes</programlisting> </example>
<example>
<title>/etc/systemd/network/25-sit.netdev</title>
<programlisting>[NetDev]
Name=sit-tun
Kind=sit
MTUBytes=1480
[Tunnel]
Local=10.65.223.238
Remote=10.65.223.239</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-6rd.netdev</title>
<programlisting>[NetDev]
Name=6rd-tun
Kind=sit
MTUBytes=1480
[Tunnel]
Local=10.65.223.238
IPv6RapidDeploymentPrefix=2602::/24</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-gre.netdev</title>
<programlisting>[NetDev]
Name=gre-tun
Kind=gre
MTUBytes=1480
[Tunnel]
Local=10.65.223.238
Remote=10.65.223.239</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-ip6gre.netdev</title>
<programlisting>[NetDev]
Name=ip6gre-tun
Kind=ip6gre
[Tunnel]
Key=123</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-vti.netdev</title>
<programlisting>[NetDev]
Name=vti-tun
Kind=vti
MTUBytes=1480
[Tunnel]
Local=10.65.223.238
Remote=10.65.223.239</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-veth.netdev</title>
<programlisting>[NetDev]
Name=veth-test
Kind=veth
[Peer]
Name=veth-peer</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-bond.netdev</title>
<programlisting>[NetDev]
Name=bond1
Kind=bond
[Bond]
Mode=802.3ad
TransmitHashPolicy=layer3+4
MIIMonitorSec=1s
LACPTransmitRate=fast
</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-dummy.netdev</title>
<programlisting>[NetDev]
Name=dummy-test
Kind=dummy
MACAddress=12:34:56:78:9a:bc</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-vrf.netdev</title>
<para>Create a VRF interface with table 42.</para>
<programlisting>[NetDev]
Name=vrf-test
Kind=vrf
[VRF]
Table=42</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-macvtap.netdev</title>
<para>Create a MacVTap device.</para>
<programlisting>[NetDev]
Name=macvtap-test
Kind=macvtap
</programlisting>
</example>
<example>
<title>/etc/systemd/network/25-wireguard.netdev</title>
<programlisting>[NetDev]
Name=wg0
Kind=wireguard
[WireGuard]
PrivateKey=EEGlnEPYJV//kbvvIqxKkQwOiS+UENyPncC4bF46ong=
ListenPort=51820
[WireGuardPeer]
PublicKey=RDf+LSpeEre7YEIKaxg+wbpsNV7du+ktR99uBEtIiCA=
AllowedIPs=fd31:bf08:57cb::/48,192.168.26.0/24
Endpoint=wireguard.example.com:51820</programlisting>
</example>
<example>
<title>/etc/systemd/network/27-xfrm.netdev</title>
<programlisting>[NetDev]
Name=xfrm0
Kind=xfrm
[Xfrm]
Independent=yes</programlisting>
</example>
</refsect1>
<refsect1>
<title>See Also</title>
<para><simplelist type="inline">
<member><citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry></member>
<member><citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry></member>
<member><citerefentry><refentrytitle>systemd.link</refentrytitle><manvolnum>5</manvolnum></citerefentry></member>
<member><citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry></member>
<member><citerefentry><refentrytitle>systemd-network-generator.service</refentrytitle><manvolnum>8</manvolnum></citerefentry></member>
</simplelist></para>
</refsect1>
</refentry>
View Git Blame Copy Permalink