1
0
mirror of https://github.com/systemd/systemd.git synced 2024-12-23 21:35:11 +03:00
systemd/man/org.freedesktop.import1.xml
2020-11-09 13:23:58 +09:00

349 lines
17 KiB
XML
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version='1.0'?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" >
<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->
<refentry id="org.freedesktop.import1" conditional='ENABLE_IMPORTD'
xmlns:xi="http://www.w3.org/2001/XInclude">
<refentryinfo>
<title>org.freedesktop.import1</title>
<productname>systemd</productname>
</refentryinfo>
<refmeta>
<refentrytitle>org.freedesktop.import1</refentrytitle>
<manvolnum>5</manvolnum>
</refmeta>
<refnamediv>
<refname>org.freedesktop.import1</refname>
<refpurpose>The D-Bus interface of systemd-importd</refpurpose>
</refnamediv>
<refsect1>
<title>Introduction</title>
<para>
<citerefentry><refentrytitle>systemd-importd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
is a system service which may be used to import, export and download additional system images. These
images can be used by tools such as
<citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>
to run local containers. The service is used as the backend for <command>machinectl pull-raw</command>,
<command>machinectl pull-tar</command> and related commands. This page describes the D-Bus interface.
</para>
<para>Note that
<citerefentry><refentrytitle>systemd-importd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>
is mostly a small companion service for
<citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
Many operations to manipulate local container and VM images are hence available via the <command>systemd-machined</command> D-Bus API, c.f.
<citerefentry><refentrytitle>org.freedesktop.machine1</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
</refsect1>
<refsect1>
<title>The Manager Object</title>
<para>The service exposes the following interfaces on the Manager object on the bus:</para>
<programlisting executable="systemd-importd" node="/org/freedesktop/import1" interface="org.freedesktop.import1.Manager">
node /org/freedesktop/import1 {
interface org.freedesktop.import1.Manager {
methods:
ImportTar(in h fd,
in s local_name,
in b force,
in b read_only,
out u transfer_id,
out o transfer_path);
ImportRaw(in h fd,
in s local_name,
in b force,
in b read_only,
out u transfer_id,
out o transfer_path);
ImportFileSystem(in h fd,
in s local_name,
in b force,
in b read_only,
out u transfer_id,
out o transfer_path);
ExportTar(in s local_name,
in h fd,
in s format,
out u transfer_id,
out o transfer_path);
ExportRaw(in s local_name,
in h fd,
in s format,
out u transfer_id,
out o transfer_path);
PullTar(in s url,
in s local_name,
in s verify_mode,
in b force,
out u transfer_id,
out o transfer_path);
PullRaw(in s url,
in s local_name,
in s verify_mode,
in b force,
out u transfer_id,
out o transfer_path);
ListTransfers(out a(usssdo) transfers);
CancelTransfer(in u transfer_id);
signals:
TransferNew(u transfer_id,
o transfer_path);
TransferRemoved(u transfer_id,
o transfer_path,
s result);
};
interface org.freedesktop.DBus.Peer { ... };
interface org.freedesktop.DBus.Introspectable { ... };
interface org.freedesktop.DBus.Properties { ... };
};
</programlisting>
<!--method ImportFileSystem is not documented!-->
<!--Autogenerated cross-references for systemd.directives, do not edit-->
<variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.import1.Manager"/>
<variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.import1.Manager"/>
<variablelist class="dbus-method" generated="True" extra-ref="ImportTar()"/>
<variablelist class="dbus-method" generated="True" extra-ref="ImportRaw()"/>
<variablelist class="dbus-method" generated="True" extra-ref="ImportFileSystem()"/>
<variablelist class="dbus-method" generated="True" extra-ref="ExportTar()"/>
<variablelist class="dbus-method" generated="True" extra-ref="ExportRaw()"/>
<variablelist class="dbus-method" generated="True" extra-ref="PullTar()"/>
<variablelist class="dbus-method" generated="True" extra-ref="PullRaw()"/>
<variablelist class="dbus-method" generated="True" extra-ref="ListTransfers()"/>
<variablelist class="dbus-method" generated="True" extra-ref="CancelTransfer()"/>
<variablelist class="dbus-signal" generated="True" extra-ref="TransferNew"/>
<variablelist class="dbus-signal" generated="True" extra-ref="TransferRemoved"/>
<!--End of Autogenerated section-->
<refsect2>
<title>Methods</title>
<para><function>ImportTar()</function> and <function>ImportRaw()</function> import a system image and
place it into <filename>/var/lib/machines/</filename>. The first argument should be a file descriptor
(opened for reading) referring to the tar or raw file to import. It should reference a file on disk,
a pipe or a socket. When <function>ImportTar()</function> is used the file descriptor should
refer to a tar file, optionally compressed with
<citerefentry project="die-net"><refentrytitle>gzip</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry project="die-net"><refentrytitle>bzip2</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
or
<citerefentry project="die-net"><refentrytitle>xz</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
<command>systemd-importd</command> will detect the used compression scheme (if any) automatically. When
<function>ImportRaw()</function> is used the file descriptor should refer to a raw or qcow2 disk image
containing an MBR or GPT disk label, also optionally compressed with gzip, bzip2 or xz. In either case,
if the file is specified as a file descriptor on disk, progress information is generated for the import
operation (as in that case we know the total size on disk). If a socket or pipe is specified, progress information is not
available. The file descriptor argument is followed by a local name for the image. This should be a
name suitable as a hostname and will be used to name the imported image below
<filename>/var/lib/machines/</filename>. A tar import is placed as a directory tree or a
<citerefentry project="man-pages"><refentrytitle>btrfs</refentrytitle><manvolnum>8</manvolnum></citerefentry>
subvolume below <filename>/var/lib/machines/</filename> under the specified name with no suffix
appended. A raw import is placed as a file in <filename>/var/lib/machines/</filename> with the
<filename>.raw</filename> suffix appended. If the <option>force</option> argument is true, any
pre-existing image with the same name is removed before starting the operation. Otherwise, the
operation fails if an image with the same name already exists. Finally, the
<option>read_only</option> argument controls
whether to create a writable or read-only image. Both methods return immediately after starting the import,
with the import transfer ongoing. They return a pair of transfer identifier and object path, which may
be used to retrieve progress information about the transfer or to cancel it. The transfer identifier is a
simple numeric identifier, the object path references an
<interfacename>org.freedesktop.import1.Transfer</interfacename> object, see below. Listen for a
<function>TransferRemoved</function> signal for the transfer ID in order to detect when a transfer is
complete. The returned transfer object is useful to determine the current progress or log output of the
ongoing import operation.</para>
<para><function>ExportTar()</function> and <function>ExportRaw()</function> implement the reverse
operation, and may be used to export a system image in order to place it in a tar or raw image. They
take the machine name to export as their first parameter, followed by a file descriptor (opened for writing)
where the tar or raw file will be written. It may either reference a file on disk or a pipe/socket. The
third argument specifies in which compression format to write the image. It takes one of
<literal>uncompressed</literal>, <literal>xz</literal>, <literal>bzip2</literal> or
<literal>gzip</literal>, depending on which compression scheme is required. The image written to the
specified file descriptor will be a tar file in case of <function>ExportTar()</function> or a raw disk
image in case of <function>ExportRaw()</function>. Note that currently raw disk images may not be
exported as tar files, and vice versa. This restriction might be lifted eventually. The method
returns a transfer identifier and object path for cancelling or tracking the export operation, similar
to <function>ImportTar()</function> or <function>ImportRaw()</function> as described above.</para>
<para><function>PullTar()</function> and <function>PullRaw()</function> may be used to download, verify
and import a system image from a URL. They take an URL argument which should point to a tar or
raw file on the <literal>http://</literal> or <literal>https://</literal> protocols, possibly
compressed with xz, bzip2 or gzip. The second argument is a local name for the image. It should be
suitable as a hostname, similar to the matching argument of the <function>ImportTar()</function> and
<function>ImportRaw()</function> methods above. The third argument indicates the verification mode for
the image. It may be one of <literal>no</literal>, <literal>checksum</literal>,
<literal>signature</literal>. <literal>no</literal> turns off any kind of verification of the image;
<literal>checksum</literal> looks for a <filename>SHA256SUM</filename> file next to the downloaded
image and verifies any SHA256 hash value in that file against the image; <literal>signature</literal>
does the same but also tries to authenticate the <filename>SHA256SUM</filename> file via
<citerefentry project="man-pages"><refentrytitle>gpg</refentrytitle><manvolnum>8</manvolnum></citerefentry>
first. The last argument indicates whether to replace a possibly pre-existing image with the same local
name (if <literal>true</literal>), or whether to fail (if <literal>false</literal>). Like the import
and export calls above, these calls return a pair of transfer identifier and object path for the ongoing
download.</para>
<para><function>ListTransfers()</function> returns a list of ongoing import, export or download
operations as created with the six calls described above. It returns an array of structures which
consist of the numeric transfer identifier, a string indicating the operation (one of
<literal>import-tar</literal>, <literal>import-raw</literal>, <literal>export-tar</literal>,
<literal>export-raw</literal>, <literal>pull-tar</literal> or <literal>pull-raw</literal>), a string
describing the remote file (in case of download operations this is the source URL, in case of
import/export operations this is a short string describing the file descriptor passed in), a string
with the local machine image name, a progress value between 0.0 (for 0%) and 1.0 (for 100%), as well as
the transfer object path.</para>
<para><function>CancelTransfer()</function> may be used to cancel an ongoing import, export or download
operation. Simply specify the transfer identifier to cancel the ongoing operation.</para>
</refsect2>
<refsect2>
<title>Signals</title>
<para>The <function>TransferNew</function> signal is generated each time a new transfer is started with
the import, export or download calls described above. It carries the transfer ID and object path that
have just been created.</para>
<para>The <function>TransferRemoved</function> signal is sent each time a transfer finishes,
is canceled or fails. It also carries the transfer ID and object path, followed by a string indicating
the result of the operation, which is one of <literal>done</literal> (on success),
<literal>canceled</literal> or <literal>failed</literal>.</para>
</refsect2>
</refsect1>
<refsect1>
<title>The Transfer Object</title>
<programlisting executable="systemd-importd" node="/org/freedesktop/import1/transfer/_1" interface="org.freedesktop.import1.Transfer">
node /org/freedesktop/import1/transfer/_1 {
interface org.freedesktop.import1.Transfer {
methods:
Cancel();
signals:
LogMessage(u priority,
s line);
properties:
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly u Id = ...;
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Local = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Remote = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Type = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("const")
readonly s Verify = '...';
@org.freedesktop.DBus.Property.EmitsChangedSignal("false")
readonly d Progress = ...;
};
interface org.freedesktop.DBus.Peer { ... };
interface org.freedesktop.DBus.Introspectable { ... };
interface org.freedesktop.DBus.Properties { ... };
};
</programlisting>
<!--signal LogMessage is not documented!-->
<!--Autogenerated cross-references for systemd.directives, do not edit-->
<variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.import1.Transfer"/>
<variablelist class="dbus-interface" generated="True" extra-ref="org.freedesktop.import1.Transfer"/>
<variablelist class="dbus-method" generated="True" extra-ref="Cancel()"/>
<variablelist class="dbus-signal" generated="True" extra-ref="LogMessage"/>
<variablelist class="dbus-property" generated="True" extra-ref="Id"/>
<variablelist class="dbus-property" generated="True" extra-ref="Local"/>
<variablelist class="dbus-property" generated="True" extra-ref="Remote"/>
<variablelist class="dbus-property" generated="True" extra-ref="Type"/>
<variablelist class="dbus-property" generated="True" extra-ref="Verify"/>
<variablelist class="dbus-property" generated="True" extra-ref="Progress"/>
<!--End of Autogenerated section-->
<refsect2>
<title>Methods</title>
<para>The <function>Cancel()</function> method may be used to cancel the transfer. It takes no
parameters. This method is pretty much equivalent to the <function>CancelTransfer()</function> method
on the <structname>Manager</structname> interface (see above), but is exposed on the
<structname>Transfer</structname> object itself instead of taking a transfer ID.</para>
</refsect2>
<refsect2>
<title>Properties</title>
<para>The <varname>Id</varname> property exposes the numeric transfer ID of the transfer object.</para>
<para>The <varname>Local</varname>, <varname>Remote</varname> and <varname>Type</varname> properties
expose the local container name of this transfer, the remote source (in case of download: the URL, in
case of import/export: a string describing the file descriptor passed in), and the type of operation
(see the Manager's <function>ListTransfer()</function> method above for an explanation of the possible
values).</para>
<para>The <varname>Verify</varname> property exposes the selected verification setting and is only
defined for download operations (see above).</para>
<para>The <varname>Progress</varname> property exposes the current progress of the transfer as a value
between 0.0 and 1.0. To show a progress bar on screen we recommend to query this value in regular
intervals, for example every 500 ms or so.</para>
</refsect2>
</refsect1>
<refsect1>
<title>Examples</title>
<example>
<title>Introspect <interfacename>org.freedesktop.import1.Manager</interfacename> on the bus</title>
<programlisting>$ gdbus introspect --system \
--dest org.freedesktop.import1 \
--object-path /org/freedesktop/import1
</programlisting>
</example>
<example>
<title>Introspect <interfacename>org.freedesktop.import1.Transfer</interfacename> on the bus</title>
<programlisting>$ gdbus introspect --system \
--dest org.freedesktop.import1 \
--object-path /org/freedesktop/import1/transfer/_1
</programlisting>
</example>
</refsect1>
<refsect1>
<title>Versioning</title>
<para>These D-Bus interfaces follow <ulink url="http://0pointer.de/blog/projects/versioning-dbus.html">
the usual interface versioning guidelines</ulink>.</para>
</refsect1>
</refentry>