shaba/systemd
1
0
Fork 0
mirror of https://github.com/systemd/systemd.git synced 2025-01-11 09:18:07 +03:00
Code
b88ba6c761
systemd/test/units
History
Zbigniew Jędrzejewski-Szmek b88ba6c761 tmpfiles: make handling of existing-but-different targets more consistent 
create_fifo() was added in a2fc2f8dd3, and
would always ignore failure. The test was trying to fail in this case, but
we actually don't fail, which seems to be correct. We didn't notice before
because the test was ineffective.

To make things consistent, generally log at warning level, but don't propagate
the error. For symlinks, log at debug level, as before.

For 'e', failure is not propagated now. The test is adjusted to match.

I think warning is appropriate in most cases: we do not expect a device node to
be replaced by a different device node or even a non-device file. This would
most likely be an error somewhere. An exception is made for symlinks, which are
mismatched on purpose, for example /etc/resolv.conf. With this patch, we don't
get any warnings with the any of the 74 tmpfiles.d files, which suggests that
increasing the warning levels will not cause too many unexpected warnings. If
it turns out that there are valid cases where people have expected mismatches
for non-symlink types, we can always decrease the log levels again.
2021-04-08 20:16:37 +02:00
..
loopy.service.d
unit-.service.d
unit-with-.service.d
unit-with-multiple-.service.d
unit-with-multiple-dashes.service.d
a-conj.service
a.service
autorelabel.service test/TEST-06: make autorelabel.service a static file too 2020-03-28 11:46:47 +01:00
b.service
basic.target license: LGPL-2.1+ -> LGPL-2.1-or-later 2020-11-09 13:23:58 +09:00
c.service
d.service
daughter.service
dml-discard-empty.service
dml-discard-set-ml.service
dml-discard.slice
dml-override-empty.service
dml-override.slice
dml-passthrough-empty.service
dml-passthrough-set-dml.service
dml-passthrough-set-ml.service
dml-passthrough.slice
dml.slice
e.service
end.service test: move TEST-01-BASIC setup to static files 2020-03-28 11:46:47 +01:00
f.service
g.service
grandchild.service
h.service
hello-after-sleep.target
hello.service
i.service
loopy2.service
loopy3.service
loopy4.service
loopy.service
nomem.slice
nomemleaf.service
parent-deep.slice
parent.slice
sched_idle_bad.service
sched_idle_ok.service
sched_rr_bad.service
sched_rr_change.service
sched_rr_ok.service
shutdown.target license: LGPL-2.1+ -> LGPL-2.1-or-later 2020-11-09 13:23:58 +09:00
sleep.service
sockets.target license: LGPL-2.1+ -> LGPL-2.1-or-later 2020-11-09 13:23:58 +09:00
son.service
sysinit.target license: LGPL-2.1+ -> LGPL-2.1-or-later 2020-11-09 13:23:58 +09:00
test-honor-first-shutdown.service test: use KILL instead of SIGKILL in TEST-52-HONORFIRSTSHUTDOWN 2020-07-05 11:00:57 +01:00
test-honor-first-shutdown.sh feature to honor first shutdown request to completion 2020-06-24 09:42:01 +02:00
testsuite-01.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-02.service test: switch TEST-02-CRYPTSETUP and TEST-24-UNITTESTS 2020-09-24 17:02:20 +02:00
testsuite-02.sh test: switch TEST-02-CRYPTSETUP and TEST-24-UNITTESTS 2020-09-24 17:02:20 +02:00
testsuite-03.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-03.sh test: move TEST-03-JOBS setup to static files 2020-03-28 11:46:47 +01:00
testsuite-04.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-04.sh test: Stricter test case for #15654 (Add more checks) 2020-05-13 21:32:45 +02:00
testsuite-05.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-05.sh test: use show -P in places 2020-04-03 18:24:21 +02:00
testsuite-06.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-06.sh test/TEST-06: skip test if no selinux 2020-03-28 11:46:47 +01:00
testsuite-07.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-07.sh test: move TEST-07-ISSUE-1981 setup to static files 2020-03-28 11:46:47 +01:00
testsuite-08.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-09.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-10.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-11.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-11.sh test: move TEST-11-ISSUE-3166 setup to static files 2020-03-28 11:46:47 +01:00
testsuite-12.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-12.sh test: move TEST-12-ISSUE-3171 setup to static files 2020-03-28 11:46:47 +01:00
testsuite-13.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-13.sh machine: enter target PID namespace when adding a live mount 2021-01-18 17:24:05 +00:00
testsuite-14.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-14.sh test: move most of TEST-14-MACHINE-ID setup to static files 2020-03-28 11:46:47 +01:00
testsuite-15.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-15.sh TEST-15-DROPINS: improve check 2021-03-07 12:27:55 +01:00
testsuite-16.service tests: replace the few remaining Type=simple with Type=exec 2020-10-22 11:05:17 +02:00
testsuite-16.sh tree-wide: fix typos 2020-12-02 10:53:33 +01:00
testsuite-17.01.sh test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-17.02.sh test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-17.03.sh test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-17.04.sh test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-17.05.sh test: add test for IMPORT{program}= udev rule 2021-03-05 18:39:38 +09:00
testsuite-17.service test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-17.sh test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-18.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-18.sh test: move TEST-18-FAILUREACTION setup to static files 2020-03-28 11:46:47 +01:00
testsuite-19.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-19.sh test: move TEST-19-DELEGATE setup to static files 2020-03-28 11:46:47 +01:00
testsuite-20.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-20.sh test: use show -P in places 2020-04-03 18:24:21 +02:00
testsuite-22.01.sh tests: make inverted tests actually count 2021-04-08 11:45:59 +02:00
testsuite-22.02.sh tmpfiles: make handling of existing-but-different targets more consistent 2021-04-08 20:16:37 +02:00
testsuite-22.03.sh TEST-22-TMPFILES: fix broken test exposed by condition check fix 2021-04-08 11:46:07 +02:00
testsuite-22.04.sh tmpfiles: make handling of existing-but-different targets more consistent 2021-04-08 20:16:37 +02:00
testsuite-22.05.sh test: move TEST-22-TMPFILES setup to static files 2020-03-28 11:46:47 +01:00
testsuite-22.06.sh tests: make inverted tests actually count 2021-04-08 11:45:59 +02:00
testsuite-22.07.sh tests: make inverted tests actually count 2021-04-08 11:45:59 +02:00
testsuite-22.08.sh tests: make inverted tests actually count 2021-04-08 11:45:59 +02:00
testsuite-22.09.sh test: move TEST-22-TMPFILES setup to static files 2020-03-28 11:46:47 +01:00
testsuite-22.10.sh test: add a test that ensures we don't regress on "argument" field handling in tmpfiles.d 2021-01-12 22:00:35 +01:00
testsuite-22.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-22.sh test: move TEST-22-TMPFILES setup to static files 2020-03-28 11:46:47 +01:00
testsuite-23.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-23.sh test: move TEST-23-TYPE-EXEC setup to static files 2020-03-28 11:46:47 +01:00
testsuite-24.service test: switch TEST-02-CRYPTSETUP and TEST-24-UNITTESTS 2020-09-24 17:02:20 +02:00
testsuite-25.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-25.sh tests: make inverted tests actually count 2021-04-08 11:45:59 +02:00
testsuite-26.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-26.sh test: move TEST-26-SETENV setup to static files 2020-03-28 11:46:47 +01:00
testsuite-27.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-27.sh Add truncate: to StandardOutput= etc. 2021-01-15 09:54:50 +01:00
testsuite-28.service test/TEST-28: avoid race in handling of /testok 2020-03-28 11:51:29 +01:00
testsuite-29.service test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-29.sh portabled: add --extension parameter for layered images support 2021-03-31 09:56:44 +01:00
testsuite-30.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-30.sh tests: make inverted tests actually count 2021-04-08 11:45:59 +02:00
testsuite-31.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-31.sh test: move TEST-31-DEVICE-ENUMERATION setup to static files 2020-03-28 11:46:47 +01:00
testsuite-32.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-32.sh test: use show -P in places 2020-04-03 18:24:21 +02:00
testsuite-33.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-33.sh TEST-33-CLEAN-UNIT: fix broken test exposed by condition check fix 2021-04-08 11:46:07 +02:00
testsuite-34.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-34.sh tests: make inverted tests actually count 2021-04-08 11:45:59 +02:00
testsuite-36.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-36.sh tree-wide: fix typo 2020-12-16 18:30:15 +01:00
testsuite-37.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-37.sh tests: make inverted tests actually count 2021-04-08 11:45:59 +02:00
testsuite-38-sleep.service test: add test for cgroup v2 freezer support 2020-04-30 19:02:55 +02:00
testsuite-38.service test: add test for cgroup v2 freezer support 2020-04-30 19:02:55 +02:00
testsuite-38.sh tests: sleep a bit and give kernel time to perform the action after manual freeze/thaw 2020-06-05 16:10:28 +02:00
testsuite-39.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-39.sh test: move TEST-39-EXECRELOAD setup to static files 2020-03-28 11:46:48 +01:00
testsuite-40.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-40.sh test: move TEST-40-EXEC-COMMAND-EX setup to static files 2020-03-28 11:46:48 +01:00
testsuite-41.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-41.sh test: use show -P in places 2020-04-03 18:24:21 +02:00
testsuite-42.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-42.sh test: move TEST-42-EXECSTOPPOST setup to static files 2020-03-28 11:46:48 +01:00
testsuite-43.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-43.sh test: make the systemd-run calls synchronous 2020-05-27 08:36:57 +02:00
testsuite-44.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-44.sh test: move TEST-44-* to static files 2020-03-28 11:46:48 +01:00
testsuite-46.service units: make systemd-homed.service installable 2020-03-31 14:55:14 +02:00
testsuite-46.sh test: drop Disk (Size|Free|Floor|Ceiling) fields prior comparing 2020-04-21 22:09:35 +02:00
testsuite-47-repro.service test: move TEST-47-* to static files 2020-03-28 11:50:53 +01:00
testsuite-47-repro.sh test: move TEST-47-* to static files 2020-03-28 11:50:53 +01:00
testsuite-47.service test: make sure to reset state before starting integration tests 2020-03-28 11:51:27 +01:00
testsuite-47.sh test: bump the TEST-47 sleeps once again 2020-07-08 22:09:55 +02:00
testsuite-48.service core: reload cache if it's dirty when starting a UNIT_NOT_FOUND unit 2020-05-30 16:50:05 +02:00
testsuite-48.sh core: refresh unit cache when building a transaction if UNIT_NOT_FOUND 2020-07-07 10:09:24 +02:00
testsuite-49-namespaced.service test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-49-non-namespaced.service test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-49.service test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-49.sh test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-50.service dissect: support single-filesystem verity images with external verity hash 2020-06-09 12:19:21 +01:00
testsuite-50.sh dissect: show partition label in table 2021-03-16 14:57:53 +01:00
testsuite-51-repro-1.service core: don't consider SERVICE_SKIP_CONDITION for abnormal or failure restarts 2020-06-10 17:12:55 +02:00
testsuite-51-repro-2.service core: don't consider SERVICE_SKIP_CONDITION for abnormal or failure restarts 2020-06-10 17:12:55 +02:00
testsuite-51.service core: don't consider SERVICE_SKIP_CONDITION for abnormal or failure restarts 2020-06-10 17:12:55 +02:00
testsuite-51.sh core: don't consider SERVICE_SKIP_CONDITION for abnormal or failure restarts 2020-06-10 17:12:55 +02:00
testsuite-53.service timer: Adjust calendar timers based on monotonic timer instead of realtime 2020-07-15 09:23:09 +02:00
testsuite-53.sh timer: Adjust calendar timers based on monotonic timer instead of realtime 2020-07-15 09:23:09 +02:00
testsuite-54.service test: add test suite for new credentials logic 2020-08-25 19:46:36 +02:00
testsuite-54.sh test: add test suite for new credentials logic 2020-08-25 19:46:36 +02:00
testsuite-55-slowgrowth.sh test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-55-testbloat.service test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-55-testchill.service test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-55-testmunch.service test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-55-workload.slice test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-55.service test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-55.sh test: merge udev tests 2021-03-05 18:36:04 +09:00
testsuite-56.service Introduce ExitType 2021-03-31 10:26:07 +02:00
testsuite-56.sh Introduce ExitType 2021-03-31 10:26:07 +02:00
testsuite.target
timers.target license: LGPL-2.1+ -> LGPL-2.1-or-later 2020-11-09 13:23:58 +09:00
unit-with-multiple-dashes.service
unstoppable.service