shaba/systemd
1
0
Fork 0
mirror of https://github.com/systemd/systemd.git synced 2024-11-05 23:51:28 +03:00
Code
bad7cecc0a
systemd/man/systemd.unit.xml
HATAYAMA Daisuke b63c88b627 man: describe "symlink" and "systemctl link" explicitly in UNIT FILE LOAD PATH 
There are sometimes users who put unit files in a location that is inaccessible
when systemd starts although they are not found and thus not started because
the corresponding mount units have not activated yet.

There is already a warning for such issue in man 8 systemctl:

     link PATH...
         ...<snip>...
         The file system where
         the linked unit files are located must be accessible
         when systemd is started (e.g. anything underneath /home
         or /var is not allowed, unless those directories are
         located on the root file system).

However, it looks that it's difficult to find the warning because introductory
users typically doesn't know systemctl link.

Although there is a description in UNIT FILE LOAD PATH pointing to systemctl
link, symlink is now not explicitly mentioned there and thus users doesn't
easily get aware of they should read it.

To deal with this, let's describe "symlink" and "systemctl link" more
explicitly in UNIT FILE LOAD PATH.
2020-01-09 18:52:13 +01:00

1994 lines
110 KiB
XML
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version='1.0'?>
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
<!ENTITY % entities SYSTEM "custom-entities.ent" >
%entities;
]>
<!-- SPDX-License-Identifier: LGPL-2.1+ -->
<refentry id="systemd.unit">
<refentryinfo>
<title>systemd.unit</title>
<productname>systemd</productname>
</refentryinfo>
<refmeta>
<refentrytitle>systemd.unit</refentrytitle>
<manvolnum>5</manvolnum>
</refmeta>
<refnamediv>
<refname>systemd.unit</refname>
<refpurpose>Unit configuration</refpurpose>
</refnamediv>
<refsynopsisdiv>
<para><filename><replaceable>service</replaceable>.service</filename>,
<filename><replaceable>socket</replaceable>.socket</filename>,
<filename><replaceable>device</replaceable>.device</filename>,
<filename><replaceable>mount</replaceable>.mount</filename>,
<filename><replaceable>automount</replaceable>.automount</filename>,
<filename><replaceable>swap</replaceable>.swap</filename>,
<filename><replaceable>target</replaceable>.target</filename>,
<filename><replaceable>path</replaceable>.path</filename>,
<filename><replaceable>timer</replaceable>.timer</filename>,
<filename><replaceable>slice</replaceable>.slice</filename>,
<filename><replaceable>scope</replaceable>.scope</filename></para>
<refsect2>
<title>System Unit Search Path</title>
<para><literallayout><filename>/etc/systemd/system.control/*</filename>
<filename>/run/systemd/system.control/*</filename>
<filename>/run/systemd/transient/*</filename>
<filename>/run/systemd/generator.early/*</filename>
<filename>/etc/systemd/system/*</filename>
<filename>/etc/systemd/systemd.attached/*</filename>
<filename>/run/systemd/system/*</filename>
<filename>/run/systemd/systemd.attached/*</filename>
<filename>/run/systemd/generator/*</filename>
<filename index='false'>…</filename>
<filename>/usr/lib/systemd/system/*</filename>
<filename>/run/systemd/generator.late/*</filename></literallayout></para>
</refsect2>
<refsect2>
<title>User Unit Search Path</title>
<para><literallayout><filename>~/.config/systemd/user.control/*</filename>
<filename>$XDG_RUNTIME_DIR/systemd/user.control/*</filename>
<filename>$XDG_RUNTIME_DIR/systemd/transient/*</filename>
<filename>$XDG_RUNTIME_DIR/systemd/generator.early/*</filename>
<filename>~/.config/systemd/user/*</filename>
<filename>/etc/systemd/user/*</filename>
<filename>$XDG_RUNTIME_DIR/systemd/user/*</filename>
<filename>/run/systemd/user/*</filename>
<filename>$XDG_RUNTIME_DIR/systemd/generator/*</filename>
<filename>~/.local/share/systemd/user/*</filename>
<filename index='false'>…</filename>
<filename>/usr/lib/systemd/user/*</filename>
<filename>$XDG_RUNTIME_DIR/systemd/generator.late/*</filename></literallayout></para>
</refsect2>
</refsynopsisdiv>
<refsect1>
<title>Description</title>
<para>A unit file is a plain text ini-style file that encodes information about a service, a
socket, a device, a mount point, an automount point, a swap file or partition, a start-up
target, a watched file system path, a timer controlled and supervised by
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, a
resource management slice or a group of externally created processes. See
<citerefentry><refentrytitle>systemd.syntax</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for a general description of the syntax.</para>
<para>This man page lists the common configuration options of all
the unit types. These options need to be configured in the [Unit]
or [Install] sections of the unit files.</para>
<para>In addition to the generic [Unit] and [Install] sections
described here, each unit may have a type-specific section, e.g.
[Service] for a service unit. See the respective man pages for
more information:
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
<para>Unit files are loaded from a set of paths determined during compilation, described in the next
section.</para>
<para>Valid unit names consist of a "name prefix" and a dot and a suffix specifying the unit type. The
"unit prefix" must consist of one or more valid characters (ASCII letters, digits, <literal>:</literal>,
<literal>-</literal>, <literal>_</literal>, <literal>.</literal>, and <literal>\</literal>). The total
length of the unit name including the suffix must not exceed 256 characters. The type suffix must be one
of <literal>.service</literal>, <literal>.socket</literal>, <literal>.device</literal>,
<literal>.mount</literal>, <literal>.automount</literal>, <literal>.swap</literal>,
<literal>.target</literal>, <literal>.path</literal>, <literal>.timer</literal>,
<literal>.slice</literal>, or <literal>.scope</literal>.</para>
<para>Units names can be parameterized by a single argument called the "instance name". The unit is then
constructed based on a "template file" which serves as the definition of multiple services or other
units. A template unit must have a single <literal>@</literal> at the end of the name (right before the
type suffix). The name of the full unit is formed by inserting the instance name between
<literal>@</literal> and the unit type suffix. In the unit file itself, the instance parameter may be
referred to using <literal>%i</literal> and other specifiers, see below.</para>
<para>Unit files may contain additional options on top of those
listed here. If systemd encounters an unknown option, it will
write a warning log message but continue loading the unit. If an
option or section name is prefixed with <option>X-</option>, it is
ignored completely by systemd. Options within an ignored section
do not need the prefix. Applications may use this to include
additional information in the unit files.</para>
<para>Units can be aliased (have an alternative name), by creating a symlink from the new name to the
existing name in one of the unit search paths. For example, <filename>systemd-networkd.service</filename>
has the alias <filename>dbus-org.freedesktop.network1.service</filename>, created during installation as
a symlink, so when <command>systemd</command> is asked through D-Bus to load
<filename>dbus-org.freedesktop.network1.service</filename>, it'll load
<filename>systemd-networkd.service</filename>. Alias names may be used in commands like
<command>disable</command>, <command>start</command>, <command>stop</command>, <command>status</command>,
and similar, and in all unit dependency directives, including <varname>Wants=</varname>,
<varname>Requires=</varname>, <varname>Before=</varname>, <varname>After=</varname>. Aliases cannot be
used with the <command>preset</command> command.</para>
<para>Unit files may specify aliases through the <varname>Alias=</varname> directive in the [Install]
section. When the unit is enabled, symlinks will be created for those names, and removed when the unit is
disabled. For example, <filename>reboot.target</filename> specifies
<varname>Alias=ctrl-alt-del.target</varname>, so when enabled, the symlink
<filename>/etc/systemd/systemd/ctrl-alt-del.service</filename> pointing to the
<filename>reboot.target</filename> file will be created, and when
<keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>Del</keycap></keycombo> is invoked,
<command>systemd</command> will look for the <filename>ctrl-alt-del.service</filename> and execute
<filename>reboot.service</filename>. <command>systemd</command> does not look at the [Install] section at
all during normal operation, so any directives in that section only have an effect through the symlinks
created during enablement.</para>
<para>Along with a unit file <filename>foo.service</filename>, the directory
<filename>foo.service.wants/</filename> may exist. All unit files symlinked from such a directory are
implicitly added as dependencies of type <varname>Wants=</varname> to the unit. Similar functionality
exists for <varname>Requires=</varname> type dependencies as well, the directory suffix is
<filename>.requires/</filename> in this case. This functionality is useful to hook units into the
start-up of other units, without having to modify their unit files. For details about the semantics of
<varname>Wants=</varname>, see below. The preferred way to create symlinks in the
<filename>.wants/</filename> or <filename>.requires/</filename> directory of a unit file is by embedding
the dependency in [Install] section of the target unit, and creating the symlink in the file system with
the <command>enable</command> or <command>preset</command> commands of
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para>
<para>Along with a unit file <filename>foo.service</filename>, a "drop-in" directory
<filename>foo.service.d/</filename> may exist. All files with the suffix <literal>.conf</literal> from this
directory will be parsed after the unit file itself is parsed. This is useful to alter or add configuration
settings for a unit, without having to modify unit files. Drop-in files must contain appropriate section
headers. For instantiated units, this logic will first look for the instance <literal>.d/</literal> subdirectory
(e.g. <literal>foo@bar.service.d/</literal>) and read its <literal>.conf</literal> files, followed by the template
<literal>.d/</literal> subdirectory (e.g. <literal>foo@.service.d/</literal>) and the <literal>.conf</literal>
files there. Moreover for units names containing dashes (<literal>-</literal>), the set of directories generated by
truncating the unit name after all dashes is searched too. Specifically, for a unit name
<filename>foo-bar-baz.service</filename> not only the regular drop-in directory
<filename>foo-bar-baz.service.d/</filename> is searched but also both <filename>foo-bar-.service.d/</filename> and
<filename>foo-.service.d/</filename>. This is useful for defining common drop-ins for a set of related units, whose
names begin with a common prefix. This scheme is particularly useful for mount, automount and slice units, whose
systematic naming structure is built around dashes as component separators. Note that equally named drop-in files
further down the prefix hierarchy override those further up,
i.e. <filename>foo-bar-.service.d/10-override.conf</filename> overrides
<filename>foo-.service.d/10-override.conf</filename>.</para>
<para>In addition to <filename>/etc/systemd/system</filename>, the drop-in <literal>.d/</literal>
directories for system services can be placed in <filename>/usr/lib/systemd/system</filename> or
<filename>/run/systemd/system</filename> directories. Drop-in files in <filename>/etc</filename>
take precedence over those in <filename>/run</filename> which in turn take precedence over those
in <filename>/usr/lib</filename>. Drop-in files under any of these directories take precedence
over unit files wherever located. Multiple drop-in files with different names are applied in
lexicographic order, regardless of which of the directories they reside in.</para>
<para>Units also support a top-level drop-in with <filename><replaceable>type</replaceable>.d/</filename>,
where <replaceable>type</replaceable> may be e.g. <literal>service</literal> or <literal>socket</literal>,
that allows altering or adding to the settings of all corresponding unit files on the system.
The formatting and precedence of applying drop-in configurations follow what is defined above.
Configurations in <filename><replaceable>type</replaceable>.d/</filename> have the lowest precedence
compared to settings in the name specific override directories. So the contents of
<filename>foo-.service.d/10-override.conf</filename> would override
<filename>service.d/10-override.conf</filename>.</para>
<!-- Note that we do not document .include here, as we consider it mostly obsolete, and want
people to use .d/ drop-ins instead. -->
<para>Note that while systemd offers a flexible dependency system
between units it is recommended to use this functionality only
sparingly and instead rely on techniques such as bus-based or
socket-based activation which make dependencies implicit,
resulting in a both simpler and more flexible system.</para>
<para>As mentioned above, a unit may be instantiated from a template file. This allows creation
of multiple units from a single configuration file. If systemd looks for a unit configuration
file, it will first search for the literal unit name in the file system. If that yields no
success and the unit name contains an <literal>@</literal> character, systemd will look for a
unit template that shares the same name but with the instance string (i.e. the part between the
<literal>@</literal> character and the suffix) removed. Example: if a service
<filename>getty@tty3.service</filename> is requested and no file by that name is found, systemd
will look for <filename>getty@.service</filename> and instantiate a service from that
configuration file if it is found.</para>
<para>To refer to the instance string from within the
configuration file you may use the special <literal>%i</literal>
specifier in many of the configuration options. See below for
details.</para>
<para>If a unit file is empty (i.e. has the file size 0) or is
symlinked to <filename>/dev/null</filename>, its configuration
will not be loaded and it appears with a load state of
<literal>masked</literal>, and cannot be activated. Use this as an
effective way to fully disable a unit, making it impossible to
start it even manually.</para>
<para>The unit file format is covered by the
<ulink
url="https://www.freedesktop.org/wiki/Software/systemd/InterfaceStabilityPromise">Interface
Stability Promise</ulink>.</para>
</refsect1>
<refsect1>
<title>String Escaping for Inclusion in Unit Names</title>
<para>Sometimes it is useful to convert arbitrary strings into unit names. To facilitate this, a method of string
escaping is used, in order to map strings containing arbitrary byte values (except NUL) into valid unit names and
their restricted character set. A common special case are unit names that reflect paths to objects in the file
system hierarchy. Example: a device unit <filename>dev-sda.device</filename> refers to a device with the device
node <filename index="false">/dev/sda</filename> in the file system.</para>
<para>The escaping algorithm operates as follows: given a string, any <literal>/</literal> character is replaced by
<literal>-</literal>, and all other characters which are not ASCII alphanumerics or <literal>_</literal> are
replaced by C-style <literal>\x2d</literal> escapes. In addition, <literal>.</literal> is replaced with such a
C-style escape when it would appear as the first character in the escaped string.</para>
<para>When the input qualifies as absolute file system path, this algorithm is extended slightly: the path to the
root directory <literal>/</literal> is encoded as single dash <literal>-</literal>. In addition, any leading,
trailing or duplicate <literal>/</literal> characters are removed from the string before transformation. Example:
<filename>/foo//bar/baz/</filename> becomes <literal>foo-bar-baz</literal>.</para>
<para>This escaping is fully reversible, as long as it is known whether the escaped string was a path (the
unescaping results are different for paths and non-path strings). The
<citerefentry><refentrytitle>systemd-escape</refentrytitle><manvolnum>1</manvolnum></citerefentry> command may be
used to apply and reverse escaping on arbitrary strings. Use <command>systemd-escape --path</command> to escape
path strings, and <command>systemd-escape</command> without <option>--path</option> otherwise.</para>
</refsect1>
<refsect1>
<title>Automatic dependencies</title>
<refsect2>
<title>Implicit Dependencies</title>
<para>A number of unit dependencies are implicitly established, depending on unit type and
unit configuration. These implicit dependencies can make unit configuration file cleaner. For
the implicit dependencies in each unit type, please refer to section "Implicit Dependencies"
in respective man pages.</para>
<para>For example, service units with <varname>Type=dbus</varname> automatically acquire
dependencies of type <varname>Requires=</varname> and <varname>After=</varname> on
<filename>dbus.socket</filename>. See
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details.</para>
</refsect2>
<refsect2>
<title>Default Dependencies</title>
<para>Default dependencies are similar to implicit dependencies, but can be turned on and off
by setting <varname>DefaultDependencies=</varname> to <varname>yes</varname> (the default) and
<varname>no</varname>, while implicit dependencies are always in effect. See section "Default
Dependencies" in respective man pages for the effect of enabling
<varname>DefaultDependencies=</varname> in each unit types.</para>
<para>For example, target units will complement all configured dependencies of type
<varname>Wants=</varname> or <varname>Requires=</varname> with dependencies of type
<varname>After=</varname> unless <varname>DefaultDependencies=no</varname> is set in the
specified units. See
<citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details. Note that this behavior can be turned off by setting
<varname>DefaultDependencies=no</varname>.</para>
</refsect2>
</refsect1>
<refsect1>
<title>Unit File Load Path</title>
<para>Unit files are loaded from a set of paths determined during
compilation, described in the two tables below. Unit files found
in directories listed earlier override files with the same name in
directories lower in the list.</para>
<para>When the variable <varname>$SYSTEMD_UNIT_PATH</varname> is set,
the contents of this variable overrides the unit load path. If
<varname>$SYSTEMD_UNIT_PATH</varname> ends with an empty component
(<literal>:</literal>), the usual unit load path will be appended
to the contents of the variable.</para>
<table>
<title>
Load path when running in system mode (<option>--system</option>).
</title>
<tgroup cols='2'>
<colspec colname='path' />
<colspec colname='expl' />
<thead>
<row>
<entry>Path</entry>
<entry>Description</entry>
</row>
</thead>
<tbody>
<row>
<entry><filename>/etc/systemd/system.control</filename></entry>
<entry morerows="1">Persistent and transient configuration created using the dbus API</entry>
</row>
<row>
<entry><filename>/run/systemd/system.control</filename></entry>
</row>
<row>
<entry><filename>/run/systemd/transient</filename></entry>
<entry>Dynamic configuration for transient units</entry>
</row>
<row>
<entry><filename>/run/systemd/generator.early</filename></entry>
<entry>Generated units with high priority (see <replaceable>early-dir</replaceable> in <citerefentry
><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
</row>
<row>
<entry><filename>/etc/systemd/system</filename></entry>
<entry>System units created by the administrator</entry>
</row>
<row>
<entry><filename>/run/systemd/system</filename></entry>
<entry>Runtime units</entry>
</row>
<row>
<entry><filename>/run/systemd/generator</filename></entry>
<entry>Generated units with medium priority (see <replaceable>normal-dir</replaceable> in <citerefentry
><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
</row>
<row>
<entry><filename>/usr/local/lib/systemd/system</filename></entry>
<entry>System units installed by the administrator </entry>
</row>
<row>
<entry><filename>/usr/lib/systemd/system</filename></entry>
<entry>System units installed by the distribution package manager</entry>
</row>
<row>
<entry><filename>/run/systemd/generator.late</filename></entry>
<entry>Generated units with low priority (see <replaceable>late-dir</replaceable> in <citerefentry
><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
</row>
</tbody>
</tgroup>
</table>
<table>
<title>
Load path when running in user mode (<option>--user</option>).
</title>
<tgroup cols='2'>
<colspec colname='path' />
<colspec colname='expl' />
<thead>
<row>
<entry>Path</entry>
<entry>Description</entry>
</row>
</thead>
<tbody>
<row>
<entry><filename>$XDG_CONFIG_HOME/systemd/user.control</filename> or <filename
>~/.config/systemd/user.control</filename></entry>
<entry morerows="1">Persistent and transient configuration created using the dbus API (<varname>$XDG_CONFIG_HOME</varname> is used if set, <filename>~/.config</filename> otherwise)</entry>
</row>
<row>
<entry><filename>$XDG_RUNTIME_DIR/systemd/user.control</filename></entry>
</row>
<row>
<entry><filename>/run/systemd/transient</filename></entry>
<entry>Dynamic configuration for transient units</entry>
</row>
<row>
<entry><filename>/run/systemd/generator.early</filename></entry>
<entry>Generated units with high priority (see <replaceable>early-dir</replaceable> in <citerefentry
><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
</row>
<row>
<entry><filename>$XDG_CONFIG_HOME/systemd/user</filename> or <filename>$HOME/.config/systemd/user</filename></entry>
<entry>User configuration (<varname>$XDG_CONFIG_HOME</varname> is used if set, <filename>~/.config</filename> otherwise)</entry>
</row>
<row>
<entry><filename>/etc/systemd/user</filename></entry>
<entry>User units created by the administrator</entry>
</row>
<row>
<entry><filename>$XDG_RUNTIME_DIR/systemd/user</filename></entry>
<entry>Runtime units (only used when $XDG_RUNTIME_DIR is set)</entry>
</row>
<row>
<entry><filename>/run/systemd/user</filename></entry>
<entry>Runtime units</entry>
</row>
<row>
<entry><filename>$XDG_RUNTIME_DIR/systemd/generator</filename></entry>
<entry>Generated units with medium priority (see <replaceable>normal-dir</replaceable> in <citerefentry
><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
</row>
<row>
<entry><filename>$XDG_DATA_HOME/systemd/user</filename> or <filename>$HOME/.local/share/systemd/user</filename></entry>
<entry>Units of packages that have been installed in the home directory (<varname>$XDG_DATA_HOME</varname> is used if set, <filename>~/.local/share</filename> otherwise)</entry>
</row>
<row>
<entry><filename>$dir/systemd/user</filename> for each <varname index="false">$dir</varname> in <varname>$XDG_DATA_DIRS</varname></entry>
<entry>Additional locations for installed user units, one for each entry in <varname>$XDG_DATA_DIRS</varname></entry>
</row>
<row>
<entry><filename>/usr/local/lib/systemd/user</filename></entry>
<entry>User units installed by the administrator</entry>
</row>
<row>
<entry><filename>/usr/lib/systemd/user</filename></entry>
<entry>User units installed by the distribution package manager</entry>
</row>
<row>
<entry><filename>$XDG_RUNTIME_DIR/systemd/generator.late</filename></entry>
<entry>Generated units with low priority (see <replaceable>late-dir</replaceable> in <citerefentry
><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>)</entry>
</row>
</tbody>
</tgroup>
</table>
<para>The set of load paths for the user manager instance may be augmented or
changed using various environment variables. And environment variables may in
turn be set using environment generators, see
<citerefentry><refentrytitle>systemd.environment-generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.
In particular, <varname>$XDG_DATA_HOME</varname> and
<varname>$XDG_DATA_DIRS</varname> may be easily set using
<citerefentry><refentrytitle>systemd-environment-d-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>.
Thus, directories listed here are just the defaults. To see the actual list that
would be used based on compilation options and current environment use
<programlisting>systemd-analyze --user unit-paths</programlisting>
</para>
<para>Moreover, additional units might be loaded into systemd from
directories not on the unit load path by creating a symlink pointing to a
unit file in the directories. You can use <command>systemctl link</command>
for this operation. See
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
for its usage and precaution.
</para>
</refsect1>
<refsect1>
<title>Unit Garbage Collection</title>
<para>The system and service manager loads a unit's configuration automatically when a unit is referenced for the
first time. It will automatically unload the unit configuration and state again when the unit is not needed anymore
("garbage collection"). A unit may be referenced through a number of different mechanisms:</para>
<orderedlist>
<listitem><para>Another loaded unit references it with a dependency such as <varname>After=</varname>,
<varname>Wants=</varname>, …</para></listitem>
<listitem><para>The unit is currently starting, running, reloading or stopping.</para></listitem>
<listitem><para>The unit is currently in the <constant>failed</constant> state. (But see below.)</para></listitem>
<listitem><para>A job for the unit is pending.</para></listitem>
<listitem><para>The unit is pinned by an active IPC client program.</para></listitem>
<listitem><para>The unit is a special "perpetual" unit that is always active and loaded. Examples for perpetual
units are the root mount unit <filename>-.mount</filename> or the scope unit <filename>init.scope</filename> that
the service manager itself lives in.</para></listitem>
<listitem><para>The unit has running processes associated with it.</para></listitem>
</orderedlist>
<para>The garbage collection logic may be altered with the <varname>CollectMode=</varname> option, which allows
configuration whether automatic unloading of units that are in <constant>failed</constant> state is permissible,
see below.</para>
<para>Note that when a unit's configuration and state is unloaded, all execution results, such as exit codes, exit
signals, resource consumption and other statistics are lost, except for what is stored in the log subsystem.</para>
<para>Use <command>systemctl daemon-reload</command> or an equivalent command to reload unit configuration while
the unit is already loaded. In this case all configuration settings are flushed out and replaced with the new
configuration (which however might not be in effect immediately), however all runtime state is
saved/restored.</para>
</refsect1>
<refsect1>
<title>[Unit] Section Options</title>
<para>The unit file may include a [Unit] section, which carries
generic information about the unit that is not dependent on the
type of unit:</para>
<variablelist class='unit-directives'>
<varlistentry>
<term><varname>Description=</varname></term>
<listitem><para>A human readable name for the unit. This is used by
<command>systemd</command> (and other UIs) as the label for the unit, so this string should
identify the unit rather than describe it, despite the name. <literal>Apache2 Web
Server</literal> is a good example. Bad examples are <literal>high-performance light-weight
HTTP server</literal> (too generic) or <literal>Apache2</literal> (too specific and
meaningless for people who do not know Apache). <command>systemd</command> will use this
string as a noun in status messages (<literal>Starting
<replaceable>description</replaceable>...</literal>, <literal>Started
<replaceable>description</replaceable>.</literal>, <literal>Reached target
<replaceable>description</replaceable>.</literal>, <literal>Failed to start
<replaceable>description</replaceable>.</literal>), so it should be capitalized, and should
not be a full sentence or a phrase with a continuous verb. Bad examples include
<literal>exiting the container</literal> or <literal>updating the database once per
day.</literal>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Documentation=</varname></term>
<listitem><para>A space-separated list of URIs referencing
documentation for this unit or its configuration. Accepted are
only URIs of the types <literal>http://</literal>,
<literal>https://</literal>, <literal>file:</literal>,
<literal>info:</literal>, <literal>man:</literal>. For more
information about the syntax of these URIs, see <citerefentry
project='man-pages'><refentrytitle>uri</refentrytitle><manvolnum>7</manvolnum></citerefentry>.
The URIs should be listed in order of relevance, starting with
the most relevant. It is a good idea to first reference
documentation that explains what the unit's purpose is,
followed by how it is configured, followed by any other
related documentation. This option may be specified more than
once, in which case the specified list of URIs is merged. If
the empty string is assigned to this option, the list is reset
and all prior assignments will have no
effect.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>Wants=</varname></term>
<listitem><para>Configures requirement dependencies on other units. This option may be specified more
than once or multiple space-separated units may be specified in one option in which case dependencies
for all listed names will be created. Dependencies of this type may also be configured outside of the
unit configuration file by adding a symlink to a <filename>.wants/</filename> directory accompanying
the unit file. For details, see above.</para>
<para>Units listed in this option will be started if the configuring unit is. However, if the listed
units fail to start or cannot be added to the transaction, this has no impact on the validity of the
transaction as a whole, and this unit will still be started. This is the recommended way to hook
start-up of one unit to the start-up of another unit.</para>
<para>Note that requirement dependencies do not influence the order in which services are started or
stopped. This has to be configured independently with the <varname>After=</varname> or
<varname>Before=</varname> options. If unit <filename>foo.service</filename> pulls in unit
<filename>bar.service</filename> as configured with <varname>Wants=</varname> and no ordering is
configured with <varname>After=</varname> or <varname>Before=</varname>, then both units will be
started simultaneously and without any delay between them if <filename>foo.service</filename> is
activated.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>Requires=</varname></term>
<listitem><para>Similar to <varname>Wants=</varname>, but declares a stronger
dependency. Dependencies of this type may also be configured by adding a symlink to a
<filename>.requires/</filename> directory accompanying the unit file.</para>
<para>If this unit gets activated, the units listed will be activated as well. If one of
the other units fails to activate, and an ordering dependency <varname>After=</varname> on the
failing unit is set, this unit will not be started. Besides, with or without specifying
<varname>After=</varname>, this unit will be stopped if one of the other units is explicitly
stopped.</para>
<para>Often, it is a better choice to use <varname>Wants=</varname> instead of
<varname>Requires=</varname> in order to achieve a system that is more robust when dealing with
failing services.</para>
<para>Note that this dependency type does not imply that the other unit always has to be in active state when
this unit is running. Specifically: failing condition checks (such as <varname>ConditionPathExists=</varname>,
<varname>ConditionPathIsSymbolicLink=</varname>, … — see below) do not cause the start job of a unit with a
<varname>Requires=</varname> dependency on it to fail. Also, some unit types may deactivate on their own (for
example, a service process may decide to exit cleanly, or a device may be unplugged by the user), which is not
propagated to units having a <varname>Requires=</varname> dependency. Use the <varname>BindsTo=</varname>
dependency type together with <varname>After=</varname> to ensure that a unit may never be in active state
without a specific other unit also in active state (see below).</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>Requisite=</varname></term>
<listitem><para>Similar to <varname>Requires=</varname>. However, if the units listed here
are not started already, they will not be started and the starting of this unit will fail
immediately. <varname>Requisite=</varname> does not imply an ordering dependency, even if
both units are started in the same transaction. Hence this setting should usually be
combined with <varname>After=</varname>, to ensure this unit is not started before the other
unit.</para>
<para>When <varname>Requisite=b.service</varname> is used on
<filename>a.service</filename>, this dependency will show as
<varname>RequisiteOf=a.service</varname> in property listing of
<filename>b.service</filename>. <varname>RequisiteOf=</varname>
dependency cannot be specified directly.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>BindsTo=</varname></term>
<listitem><para>Configures requirement dependencies, very similar in style to
<varname>Requires=</varname>. However, this dependency type is stronger: in addition to the effect of
<varname>Requires=</varname> it declares that if the unit bound to is stopped, this unit will be stopped
too. This means a unit bound to another unit that suddenly enters inactive state will be stopped too.
Units can suddenly, unexpectedly enter inactive state for different reasons: the main process of a service unit
might terminate on its own choice, the backing device of a device unit might be unplugged or the mount point of
a mount unit might be unmounted without involvement of the system and service manager.</para>
<para>When used in conjunction with <varname>After=</varname> on the same unit the behaviour of
<varname>BindsTo=</varname> is even stronger. In this case, the unit bound to strictly has to be in active
state for this unit to also be in active state. This not only means a unit bound to another unit that suddenly
enters inactive state, but also one that is bound to another unit that gets skipped due to a failed condition
check (such as <varname>ConditionPathExists=</varname>, <varname>ConditionPathIsSymbolicLink=</varname>, … —
see below) will be stopped, should it be running. Hence, in many cases it is best to combine
<varname>BindsTo=</varname> with <varname>After=</varname>.</para>
<para>When <varname>BindsTo=b.service</varname> is used on
<filename>a.service</filename>, this dependency will show as
<varname>BoundBy=a.service</varname> in property listing of
<filename>b.service</filename>. <varname>BoundBy=</varname>
dependency cannot be specified directly.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>PartOf=</varname></term>
<listitem><para>Configures dependencies similar to
<varname>Requires=</varname>, but limited to stopping and
restarting of units. When systemd stops or restarts the units
listed here, the action is propagated to this unit. Note that
this is a one-way dependency — changes to this unit do not
affect the listed units.</para>
<para>When <varname>PartOf=b.service</varname> is used on
<filename>a.service</filename>, this dependency will show as
<varname>ConsistsOf=a.service</varname> in property listing of
<filename>b.service</filename>. <varname>ConsistsOf=</varname>
dependency cannot be specified directly.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>Conflicts=</varname></term>
<listitem><para>A space-separated list of unit names. Configures negative requirement
dependencies. If a unit has a <varname>Conflicts=</varname> setting on another unit, starting the
former will stop the latter and vice versa.</para>
<para>Note that this setting does not imply an ordering dependency, similarly to the
<varname>Wants=</varname> and <varname>Requires=</varname> dependencies described above. This means
that to ensure that the conflicting unit is stopped before the other unit is started, an
<varname>After=</varname> or <varname>Before=</varname> dependency must be declared. It doesn't
matter which of the two ordering dependencies is used, because stop jobs are always ordered before
start jobs, see the discussion in <varname>Before=</varname>/<varname>After=</varname> below.</para>
<para>If unit A that conflicts with unit B is scheduled to
be started at the same time as B, the transaction will either
fail (in case both are required parts of the transaction) or be
modified to be fixed (in case one or both jobs are not a
required part of the transaction). In the latter case, the job
that is not required will be removed, or in case both are
not required, the unit that conflicts will be started and the
unit that is conflicted is stopped.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>Before=</varname></term>
<term><varname>After=</varname></term>
<listitem><para>These two settings expect a space-separated list of unit names. They may be specified
more than once, in which case dependencies for all listed names are created.</para>
<para>Those two setttings configure ordering dependencies between units. If unit
<filename>foo.service</filename> contains the setting <option>Before=bar.service</option> and both
units are being started, <filename>bar.service</filename>'s start-up is delayed until
<filename>foo.service</filename> has finished starting up. <varname>After=</varname> is the inverse
of <varname>Before=</varname>, i.e. while <varname>Before=</varname> ensures that the configured unit
is started before the listed unit begins starting up, <varname>After=</varname> ensures the opposite,
that the listed unit is fully started up before the configured unit is started.</para>
<para>When two units with an ordering dependency between them are shut down, the inverse of the
start-up order is applied. i.e. if a unit is configured with <varname>After=</varname> on another
unit, the former is stopped before the latter if both are shut down. Given two units with any
ordering dependency between them, if one unit is shut down and the other is started up, the shutdown
is ordered before the start-up. It doesn't matter if the ordering dependency is
<varname>After=</varname> or <varname>Before=</varname>, in this case. It also doesn't matter which
of the two is shut down, as long as one is shut down and the other is started up; the shutdown is
ordered before the start-up in all cases. If two units have no ordering dependencies between them,
they are shut down or started up simultaneously, and no ordering takes place. It depends on the unit
type when precisely a unit has finished starting up. Most importantly, for service units start-up is
considered completed for the purpose of <varname>Before=</varname>/<varname>After=</varname> when all
its configured start-up commands have been invoked and they either failed or reported start-up
success.</para>
<para>Note that those settings are independent of and orthogonal to the requirement dependencies as
configured by <varname>Requires=</varname>, <varname>Wants=</varname>, <varname>Requisite=</varname>,
or <varname>BindsTo=</varname>. It is a common pattern to include a unit name in both the
<varname>After=</varname> and <varname>Wants=</varname> options, in which case the unit listed will
be started before the unit that is configured with these options.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>OnFailure=</varname></term>
<listitem><para>A space-separated list of one or more units
that are activated when this unit enters the
<literal>failed</literal> state. A service unit using
<varname>Restart=</varname> enters the failed state only after
the start limits are reached.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>PropagatesReloadTo=</varname></term>
<term><varname>ReloadPropagatedFrom=</varname></term>
<listitem><para>A space-separated list of one or more units
where reload requests on this unit will be propagated to, or
reload requests on the other unit will be propagated to this
unit, respectively. Issuing a reload request on a unit will
automatically also enqueue a reload request on all units that
the reload request shall be propagated to via these two
settings.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>JoinsNamespaceOf=</varname></term>
<listitem><para>For units that start processes (such as service units), lists one or more other units
whose network and/or temporary file namespace to join. This only applies to unit types which support
the <varname>PrivateNetwork=</varname>, <varname>NetworkNamespacePath=</varname> and
<varname>PrivateTmp=</varname> directives (see
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> for
details). If a unit that has this setting set is started, its processes will see the same
<filename>/tmp</filename>, <filename>/var/tmp</filename> and network namespace as one listed unit
that is started. If multiple listed units are already started, it is not defined which namespace is
joined. Note that this setting only has an effect if
<varname>PrivateNetwork=</varname>/<varname>NetworkNamespacePath=</varname> and/or
<varname>PrivateTmp=</varname> is enabled for both the unit that joins the namespace and the unit
whose namespace is joined.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>RequiresMountsFor=</varname></term>
<listitem><para>Takes a space-separated list of absolute
paths. Automatically adds dependencies of type
<varname>Requires=</varname> and <varname>After=</varname> for
all mount units required to access the specified path.</para>
<para>Mount points marked with <option>noauto</option> are not
mounted automatically through <filename>local-fs.target</filename>,
but are still honored for the purposes of this option, i.e. they
will be pulled in by this unit.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>OnFailureJobMode=</varname></term>
<listitem><para>Takes a value of
<literal>fail</literal>,
<literal>replace</literal>,
<literal>replace-irreversibly</literal>,
<literal>isolate</literal>,
<literal>flush</literal>,
<literal>ignore-dependencies</literal> or
<literal>ignore-requirements</literal>. Defaults to
<literal>replace</literal>. Specifies how the units listed in
<varname>OnFailure=</varname> will be enqueued. See
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s
<option>--job-mode=</option> option for details on the
possible values. If this is set to <literal>isolate</literal>,
only a single unit may be listed in
<varname>OnFailure=</varname>..</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>IgnoreOnIsolate=</varname></term>
<listitem><para>Takes a boolean argument. If <option>true</option>, this unit
will not be stopped when isolating another unit. Defaults to
<option>false</option> for service, target, socket, busname, timer, and path
units, and <option>true</option> for slice, scope, device, swap, mount, and
automount units.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>StopWhenUnneeded=</varname></term>
<listitem><para>Takes a boolean argument. If
<option>true</option>, this unit will be stopped when it is no
longer used. Note that, in order to minimize the work to be
executed, systemd will not stop units by default unless they
are conflicting with other units, or the user explicitly
requested their shut down. If this option is set, a unit will
be automatically cleaned up if no other active unit requires
it. Defaults to <option>false</option>.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>RefuseManualStart=</varname></term>
<term><varname>RefuseManualStop=</varname></term>
<listitem><para>Takes a boolean argument. If
<option>true</option>, this unit can only be activated or
deactivated indirectly. In this case, explicit start-up or
termination requested by the user is denied, however if it is
started or stopped as a dependency of another unit, start-up
or termination will succeed. This is mostly a safety feature
to ensure that the user does not accidentally activate units
that are not intended to be activated explicitly, and not
accidentally deactivate units that are not intended to be
deactivated. These options default to
<option>false</option>.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>AllowIsolate=</varname></term>
<listitem><para>Takes a boolean argument. If
<option>true</option>, this unit may be used with the
<command>systemctl isolate</command> command. Otherwise, this
will be refused. It probably is a good idea to leave this
disabled except for target units that shall be used similar to
runlevels in SysV init systems, just as a precaution to avoid
unusable system states. This option defaults to
<option>false</option>.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>DefaultDependencies=</varname></term>
<listitem><para>Takes a boolean argument. If
<option>yes</option>, (the default), a few default
dependencies will implicitly be created for the unit. The
actual dependencies created depend on the unit type. For
example, for service units, these dependencies ensure that the
service is started only after basic system initialization is
completed and is properly terminated on system shutdown. See
the respective man pages for details. Generally, only services
involved with early boot or late shutdown should set this
option to <option>no</option>. It is highly recommended to
leave this option enabled for the majority of common units. If
set to <option>no</option>, this option does not disable
all implicit dependencies, just non-essential
ones.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>CollectMode=</varname></term>
<listitem><para>Tweaks the "garbage collection" algorithm for this unit. Takes one of <option>inactive</option>
or <option>inactive-or-failed</option>. If set to <option>inactive</option> the unit will be unloaded if it is
in the <constant>inactive</constant> state and is not referenced by clients, jobs or other units — however it
is not unloaded if it is in the <constant>failed</constant> state. In <option>failed</option> mode, failed
units are not unloaded until the user invoked <command>systemctl reset-failed</command> on them to reset the
<constant>failed</constant> state, or an equivalent command. This behaviour is altered if this option is set to
<option>inactive-or-failed</option>: in this case the unit is unloaded even if the unit is in a
<constant>failed</constant> state, and thus an explicitly resetting of the <constant>failed</constant> state is
not necessary. Note that if this mode is used unit results (such as exit codes, exit signals, consumed
resources, …) are flushed out immediately after the unit completed, except for what is stored in the logging
subsystem. Defaults to <option>inactive</option>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>FailureAction=</varname></term>
<term><varname>SuccessAction=</varname></term>
<listitem><para>Configure the action to take when the unit stops and enters a failed state or inactive state.
Takes one of <option>none</option>, <option>reboot</option>, <option>reboot-force</option>,
<option>reboot-immediate</option>, <option>poweroff</option>, <option>poweroff-force</option>,
<option>poweroff-immediate</option>, <option>exit</option>, and <option>exit-force</option>. In system mode,
all options are allowed. In user mode, only <option>none</option>, <option>exit</option>, and
<option>exit-force</option> are allowed. Both options default to <option>none</option>.</para>
<para>If <option>none</option> is set, no action will be triggered. <option>reboot</option> causes a reboot
following the normal shutdown procedure (i.e. equivalent to <command>systemctl reboot</command>).
<option>reboot-force</option> causes a forced reboot which will terminate all processes forcibly but should
cause no dirty file systems on reboot (i.e. equivalent to <command>systemctl reboot -f</command>) and
<option>reboot-immediate</option> causes immediate execution of the
<citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry> system call, which
might result in data loss (i.e. equivalent to <command>systemctl reboot -ff</command>). Similarly,
<option>poweroff</option>, <option>poweroff-force</option>, <option>poweroff-immediate</option> have the effect
of powering down the system with similar semantics. <option>exit</option> causes the manager to exit following
the normal shutdown procedure, and <option>exit-force</option> causes it terminate without shutting down
services. When <option>exit</option> or <option>exit-force</option> is used by default the exit status of the
main process of the unit (if this applies) is returned from the service manager. However, this may be overridden
with <varname>FailureActionExitStatus=</varname>/<varname>SuccessActionExitStatus=</varname>, see
below.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>FailureActionExitStatus=</varname></term>
<term><varname>SuccessActionExitStatus=</varname></term>
<listitem><para>Controls the exit status to propagate back to an invoking container manager (in case of a
system service) or service manager (in case of a user manager) when the
<varname>FailureAction=</varname>/<varname>SuccessAction=</varname> are set to <option>exit</option> or
<option>exit-force</option> and the action is triggered. By default the exit status of the main process of the
triggering unit (if this applies) is propagated. Takes a value in the range 0…255 or the empty string to
request default behaviour.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>JobTimeoutSec=</varname></term>
<term><varname>JobRunningTimeoutSec=</varname></term>
<listitem><para>When a job for this unit is queued, a timeout <varname>JobTimeoutSec=</varname> may be
configured. Similarly, <varname>JobRunningTimeoutSec=</varname> starts counting when the queued job is actually
started. If either time limit is reached, the job will be cancelled, the unit however will not change state or
even enter the <literal>failed</literal> mode. This value defaults to <literal>infinity</literal> (job timeouts
disabled), except for device units (<varname>JobRunningTimeoutSec=</varname> defaults to
<varname>DefaultTimeoutStartSec=</varname>). NB: this timeout is independent from any unit-specific timeout
(for example, the timeout set with <varname>TimeoutStartSec=</varname> in service units) as the job timeout has
no effect on the unit itself, only on the job that might be pending for it. Or in other words: unit-specific
timeouts are useful to abort unit state changes, and revert them. The job timeout set with this option however
is useful to abort only the job waiting for the unit state to change.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>JobTimeoutAction=</varname></term>
<term><varname>JobTimeoutRebootArgument=</varname></term>
<listitem><para><varname>JobTimeoutAction=</varname> optionally configures an additional action to take when
the timeout is hit, see description of <varname>JobTimeoutSec=</varname> and
<varname>JobRunningTimeoutSec=</varname> above. It takes the same values as
<varname>StartLimitAction=</varname>. Defaults to <option>none</option>.
<varname>JobTimeoutRebootArgument=</varname> configures an optional reboot string to pass to the
<citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry> system call.
</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>StartLimitIntervalSec=<replaceable>interval</replaceable></varname></term>
<term><varname>StartLimitBurst=<replaceable>burst</replaceable></varname></term>
<listitem><para>Configure unit start rate limiting. Units which are started more than
<replaceable>burst</replaceable> times within an <replaceable>interval</replaceable> time interval are not
permitted to start any more. Use <varname>StartLimitIntervalSec=</varname> to configure the checking interval
(defaults to <varname>DefaultStartLimitIntervalSec=</varname> in manager configuration file, set it to 0 to
disable any kind of rate limiting). Use <varname>StartLimitBurst=</varname> to configure how many starts per
interval are allowed (defaults to <varname>DefaultStartLimitBurst=</varname> in manager configuration
file). These configuration options are particularly useful in conjunction with the service setting
<varname>Restart=</varname> (see
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>); however,
they apply to all kinds of starts (including manual), not just those triggered by the
<varname>Restart=</varname> logic. Note that units which are configured for <varname>Restart=</varname> and
which reach the start limit are not attempted to be restarted anymore; however, they may still be restarted
manually at a later point, after the <replaceable>interval</replaceable> has passed. From this point on, the
restart logic is activated again. Note that <command>systemctl reset-failed</command> will cause the restart
rate counter for a service to be flushed, which is useful if the administrator wants to manually start a unit
and the start limit interferes with that. Note that this rate-limiting is enforced after any unit condition
checks are executed, and hence unit activations with failing conditions do not count towards this rate
limit. This setting does not apply to slice, target, device, and scope units, since they are unit types whose
activation may either never fail, or may succeed only a single time.</para>
<para>When a unit is unloaded due to the garbage collection logic (see above) its rate limit counters are
flushed out too. This means that configuring start rate limiting for a unit that is not referenced continuously
has no effect.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>StartLimitAction=</varname></term>
<listitem><para>Configure an additional action to take if the rate limit configured with
<varname>StartLimitIntervalSec=</varname> and <varname>StartLimitBurst=</varname> is hit. Takes the same
values as the setting <varname>FailureAction=</varname>/<varname>SuccessAction=</varname> settings and executes
the same actions. If <option>none</option> is set, hitting the rate limit will trigger no action besides that
the start will not be permitted. Defaults to <option>none</option>.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>RebootArgument=</varname></term>
<listitem><para>Configure the optional argument for the
<citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry> system call if
<varname>StartLimitAction=</varname> or <varname>FailureAction=</varname> is a reboot action. This
works just like the optional argument to <command>systemctl reboot</command> command.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>SourcePath=</varname></term>
<listitem><para>A path to a configuration file this unit has
been generated from. This is primarily useful for
implementation of generator tools that convert configuration
from an external configuration file format into native unit
files. This functionality should not be used in normal
units.</para></listitem>
</varlistentry>
</variablelist>
<refsect2>
<title>Conditions and Asserts</title>
<para>Unit files may also include a number of <varname index="false">Condition…=</varname> and
<varname index="false">Assert…=</varname> settings. Before the unit is started, systemd will verify
that the specified conditions are true. If not, the starting of the unit will be (mostly silently)
skipped. Failing conditions will not result in the unit being moved into the <literal>failed</literal>
state. The conditions are checked at the time the queued start job is to be executed. The ordering
dependencies are still respected, so other units are still pulled in and ordered as if this unit was
successfully activated. Use condition expressions in order to skip units that do not apply to the local
system, for example because the kernel or runtime environment doesn't require their functionality.
</para>
<para>If multiple conditions are specified, the unit will be executed if all of them apply (i.e. a
logical AND is applied). Condition checks can use a pipe symbol (<literal>|</literal>) after the equals
sign (<literal>Condition…=|…</literal>), which causes the condition becomes a triggering condition. If
at least one triggering condition is defined for a unit, then the unit will be executed if at least one
of the triggering conditions apply and all of the non-triggering conditions. If you prefix an argument
with the pipe symbol and an exclamation mark, the pipe symbol must be passed first, the exclamation
second. If any of these options is assigned the empty string, the list of conditions is reset
completely, all previous condition settings (of any kind) will have no effect.</para>
<para>The <varname>AssertArchitecture=</varname>, <varname>AssertVirtualization=</varname>, … options
provide a similar mechanism that causes the job to fail (instead of being skipped). The failed check is
logged. Units with failed conditions are considered to be in a clean state and will be garbage
collected if they are not referenced. This means that when queried, the condition failure may or may
not show up in the state of the unit.</para>
<para>Note that neither assertion nor condition expressions result in unit state changes. Also note
that both are checked at the time the job is to be executed, i.e. long after depending jobs and it
itself were queued. Thus, neither condition nor assertion expressions are suitable for conditionalizing
unit dependencies.</para>
<para>The <command>condition</command> verb of
<citerefentry><refentrytitle>systemd-analyze</refentrytitle><manvolnum>1</manvolnum></citerefentry> can
be used to test condition and assert expressions.</para>
<para>Except for <varname>ConditionPathIsSymbolicLink=</varname>, all path checks follow symlinks.</para>
<variablelist class='unit-directives'>
<!-- We do not document ConditionNull= here, as it is not particularly useful and probably just
confusing. -->
<varlistentry>
<term><varname>ConditionArchitecture=</varname></term>
<listitem><para>Check whether the system is running on a specific architecture. Takes one of
<literal>x86</literal>,
<literal>x86-64</literal>,
<literal>ppc</literal>,
<literal>ppc-le</literal>,
<literal>ppc64</literal>,
<literal>ppc64-le</literal>,
<literal>ia64</literal>,
<literal>parisc</literal>,
<literal>parisc64</literal>,
<literal>s390</literal>,
<literal>s390x</literal>,
<literal>sparc</literal>,
<literal>sparc64</literal>,
<literal>mips</literal>,
<literal>mips-le</literal>,
<literal>mips64</literal>,
<literal>mips64-le</literal>,
<literal>alpha</literal>,
<literal>arm</literal>,
<literal>arm-be</literal>,
<literal>arm64</literal>,
<literal>arm64-be</literal>,
<literal>sh</literal>,
<literal>sh64</literal>,
<literal>m68k</literal>,
<literal>tilegx</literal>,
<literal>cris</literal>,
<literal>arc</literal>,
<literal>arc-be</literal>, or
<literal>native</literal>.</para>
<para>The architecture is determined from the information returned by
<citerefentry project='man-pages'><refentrytitle>uname</refentrytitle><manvolnum>2</manvolnum></citerefentry>
and is thus subject to
<citerefentry><refentrytitle>personality</refentrytitle><manvolnum>2</manvolnum></citerefentry>.
Note that a <varname>Personality=</varname> setting in the same unit file has no effect on this
condition. A special architecture name <literal>native</literal> is mapped to the architecture the
system manager itself is compiled for. The test may be negated by prepending an exclamation
mark.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionVirtualization=</varname></term>
<listitem><para>Check whether the system is executed in a virtualized environment and optionally
test whether it is a specific implementation. Takes either boolean value to check if being executed
in any virtualized environment, or one of
<literal>vm</literal> and
<literal>container</literal> to test against a generic type of virtualization solution, or one of
<literal>qemu</literal>,
<literal>kvm</literal>,
<literal>zvm</literal>,
<literal>vmware</literal>,
<literal>microsoft</literal>,
<literal>oracle</literal>,
<literal>xen</literal>,
<literal>bochs</literal>,
<literal>uml</literal>,
<literal>bhyve</literal>,
<literal>qnx</literal>,
<literal>openvz</literal>,
<literal>lxc</literal>,
<literal>lxc-libvirt</literal>,
<literal>systemd-nspawn</literal>,
<literal>docker</literal>,
<literal>podman</literal>,
<literal>rkt</literal>,
<literal>wsl</literal>,
<literal>acrn</literal> to test
against a specific implementation, or
<literal>private-users</literal> to check whether we are running in a user namespace. See
<citerefentry><refentrytitle>systemd-detect-virt</refentrytitle><manvolnum>1</manvolnum></citerefentry>
for a full list of known virtualization technologies and their identifiers. If multiple
virtualization technologies are nested, only the innermost is considered. The test may be negated
by prepending an exclamation mark.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionHost=</varname></term>
<listitem><para><varname>ConditionHost=</varname> may be used to match against the hostname or
machine ID of the host. This either takes a hostname string (optionally with shell style globs)
which is tested against the locally set hostname as returned by
<citerefentry><refentrytitle>gethostname</refentrytitle><manvolnum>2</manvolnum></citerefentry>, or
a machine ID formatted as string (see
<citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
The test may be negated by prepending an exclamation mark.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionKernelCommandLine=</varname></term>
<listitem><para><varname>ConditionKernelCommandLine=</varname> may be used to check whether a
specific kernel command line option is set (or if prefixed with the exclamation mark — unset). The
argument must either be a single word, or an assignment (i.e. two words, separated by
<literal>=</literal>). In the former case the kernel command line is searched for the word
appearing as is, or as left hand side of an assignment. In the latter case, the exact assignment is
looked for with right and left hand side matching.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionKernelVersion=</varname></term>
<listitem><para><varname>ConditionKernelVersion=</varname> may be used to check whether the kernel
version (as reported by <command>uname -r</command>) matches a certain expression (or if prefixed
with the exclamation mark does not match it). The argument must be a list of (potentially quoted)
expressions. For each of the expressions, if it starts with one of <literal>&lt;</literal>,
<literal>&lt;=</literal>, <literal>=</literal>, <literal>!=</literal>, <literal>&gt;=</literal>,
<literal>&gt;</literal> a relative version comparison is done, otherwise the specified string is
matched with shell-style globs.</para>
<para>Note that using the kernel version string is an unreliable way to determine which features
are supported by a kernel, because of the widespread practice of backporting drivers, features, and
fixes from newer upstream kernels into older versions provided by distributions. Hence, this check
is inherently unportable and should not be used for units which may be used on different
distributions.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionSecurity=</varname></term>
<listitem><para><varname>ConditionSecurity=</varname> may be used to check whether the given
security technology is enabled on the system. Currently, the recognized values are
<literal>selinux</literal>, <literal>apparmor</literal>, <literal>tomoyo</literal>,
<literal>ima</literal>, <literal>smack</literal>, <literal>audit</literal> and
<literal>uefi-secureboot</literal>. The test may be negated by prepending an exclamation
mark.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionCapability=</varname></term>
<listitem><para>Check whether the given capability exists in the capability bounding set of the
service manager (i.e. this does not check whether capability is actually available in the permitted
or effective sets, see
<citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for details). Pass a capability name such as <literal>CAP_MKNOD</literal>, possibly prefixed with
an exclamation mark to negate the check.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionACPower=</varname></term>
<listitem><para>Check whether the system has AC power, or is exclusively battery powered at the
time of activation of the unit. This takes a boolean argument. If set to <literal>true</literal>,
the condition will hold only if at least one AC connector of the system is connected to a power
source, or if no AC connectors are known. Conversely, if set to <literal>false</literal>, the
condition will hold only if there is at least one AC connector known and all AC connectors are
disconnected from a power source.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionNeedsUpdate=</varname></term>
<listitem><para>Takes one of <filename>/var</filename> or <filename>/etc</filename> as argument,
possibly prefixed with a <literal>!</literal> (to inverting the condition). This condition may be
used to conditionalize units on whether the specified directory requires an update because
<filename>/usr</filename>'s modification time is newer than the stamp file
<filename>.updated</filename> in the specified directory. This is useful to implement offline
updates of the vendor operating system resources in <filename>/usr</filename> that require updating
of <filename>/etc</filename> or <filename>/var</filename> on the next following boot. Units making
use of this condition should order themselves before
<citerefentry><refentrytitle>systemd-update-done.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
to make sure they run before the stamp file's modification time gets reset indicating a completed
update.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionFirstBoot=</varname></term>
<listitem><para>Takes a boolean argument. This condition may be used to conditionalize units on
whether the system is booting up with an unpopulated <filename>/etc</filename> directory
(specifically: an <filename>/etc</filename> with no <filename>/etc/machine-id</filename>). This may
be used to populate <filename>/etc</filename> on the first boot after factory reset, or when a new
system instance boots up for the first time.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionPathExists=</varname></term>
<listitem><para>Check for the exists of a file. If the specified absolute path name does not exist,
the condition will fail. If the absolute path name passed to
<varname>ConditionPathExists=</varname> is prefixed with an exclamation mark
(<literal>!</literal>), the test is negated, and the unit is only started if the path does not
exist.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionPathExistsGlob=</varname></term>
<listitem><para><varname>ConditionPathExistsGlob=</varname> is similar to
<varname>ConditionPathExists=</varname>, but checks for the existence of at least one file or
directory matching the specified globbing pattern.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionPathIsDirectory=</varname></term>
<listitem><para><varname>ConditionPathIsDirectory=</varname> is similar to
<varname>ConditionPathExists=</varname> but verifies that a certain path exists and is a
directory.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionPathIsSymbolicLink=</varname></term>
<listitem><para><varname>ConditionPathIsSymbolicLink=</varname> is similar to
<varname>ConditionPathExists=</varname> but verifies that a certain path exists and is a symbolic
link.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionPathIsMountPoint=</varname></term>
<listitem><para><varname>ConditionPathIsMountPoint=</varname> is similar to
<varname>ConditionPathExists=</varname> but verifies that a certain path exists and is a mount
point.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionPathIsReadWrite=</varname></term>
<listitem><para><varname>ConditionPathIsReadWrite=</varname> is similar to
<varname>ConditionPathExists=</varname> but verifies that the underlying file system is readable
and writable (i.e. not mounted read-only).</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionDirectoryNotEmpty=</varname></term>
<listitem><para><varname>ConditionDirectoryNotEmpty=</varname> is similar to
<varname>ConditionPathExists=</varname> but verifies that a certain path exists and is a non-empty
directory.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionFileNotEmpty=</varname></term>
<listitem><para><varname>ConditionFileNotEmpty=</varname> is similar to
<varname>ConditionPathExists=</varname> but verifies that a certain path exists and refers to a
regular file with a non-zero size.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionFileIsExecutable=</varname></term>
<listitem><para><varname>ConditionFileIsExecutable=</varname> is similar to
<varname>ConditionPathExists=</varname> but verifies that a certain path exists, is a regular file,
and marked executable.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionUser=</varname></term>
<listitem><para><varname>ConditionUser=</varname> takes a numeric <literal>UID</literal>, a UNIX
user name, or the special value <literal>@system</literal>. This condition may be used to check
whether the service manager is running as the given user. The special value
<literal>@system</literal> can be used to check if the user id is within the system user
range. This option is not useful for system services, as the system manager exclusively runs as the
root user, and thus the test result is constant.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionGroup=</varname></term>
<listitem><para><varname>ConditionGroup=</varname> is similar to <varname>ConditionUser=</varname>
but verifies that the service manager's real or effective group, or any of its auxiliary groups,
match the specified group or GID. This setting does not support the special value
<literal>@system</literal>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionControlGroupController=</varname></term>
<listitem><para>Verify that the given cgroup controller (eg. <literal>cpu</literal>) is available
for use on the system. For example, a particular controller may not be available if it was disabled
on the kernel command line with <varname>cgroup_disable=controller</varname>. Multiple controllers
may be passed with a space separating them; in this case the condition will only pass if all listed
controllers are available for use. Controllers unknown to systemd are ignored. Valid controllers
are <literal>cpu</literal>, <literal>cpuacct</literal>, <literal>io</literal>,
<literal>blkio</literal>, <literal>memory</literal>, <literal>devices</literal>, and
<literal>pids</literal>.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionMemory=</varname></term>
<listitem><para>Verify that the specified amount of system memory is available to the current
system. Takes a memory size in bytes as argument, optionally prefixed with a comparison operator
<literal>&lt;</literal>, <literal>&lt;=</literal>, <literal>=</literal>, <literal>!=</literal>,
<literal>&gt;=</literal>, <literal>&gt;</literal>. On bare-metal systems compares the amount of
physical memory in the system with the specified size, adhering to the specified comparison
operator. In containers compares the amount of memory assigned to the container instead.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><varname>ConditionCPUs=</varname></term>
<listitem><para>Verify that the specified number of CPUs is available to the current system. Takes
a number of CPUs as argument, optionally prefixed with a comparison operator
<literal>&lt;</literal>, <literal>&lt;=</literal>, <literal>=</literal>, <literal>!=</literal>,
<literal>&gt;=</literal>, <literal>&gt;</literal>. Compares the number of CPUs in the CPU affinity
mask configured of the service manager itself with the specified number, adhering to the specified
comparison operator. On physical systems the number of CPUs in the affinity mask of the service
manager usually matches the number of physical CPUs, but in special and virtual environments might
differ. In particular, in containers the affinity mask usually matches the number of CPUs assigned
to the container and not the physically available ones.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>AssertArchitecture=</varname></term>
<term><varname>AssertVirtualization=</varname></term>
<term><varname>AssertHost=</varname></term>
<term><varname>AssertKernelCommandLine=</varname></term>
<term><varname>AssertKernelVersion=</varname></term>
<term><varname>AssertSecurity=</varname></term>
<term><varname>AssertCapability=</varname></term>
<term><varname>AssertACPower=</varname></term>
<term><varname>AssertNeedsUpdate=</varname></term>
<term><varname>AssertFirstBoot=</varname></term>
<term><varname>AssertPathExists=</varname></term>
<term><varname>AssertPathExistsGlob=</varname></term>
<term><varname>AssertPathIsDirectory=</varname></term>
<term><varname>AssertPathIsSymbolicLink=</varname></term>
<term><varname>AssertPathIsMountPoint=</varname></term>
<term><varname>AssertPathIsReadWrite=</varname></term>
<term><varname>AssertDirectoryNotEmpty=</varname></term>
<term><varname>AssertFileNotEmpty=</varname></term>
<term><varname>AssertFileIsExecutable=</varname></term>
<term><varname>AssertUser=</varname></term>
<term><varname>AssertGroup=</varname></term>
<term><varname>AssertControlGroupController=</varname></term>
<listitem><para>Similar to the <varname>ConditionArchitecture=</varname>,
<varname>ConditionVirtualization=</varname>, …, condition settings described above, these settings
add assertion checks to the start-up of the unit. However, unlike the conditions settings, any
assertion setting that is not met results in failure of the start job (which means this is logged
loudly). Note that hitting a configured assertion does not cause the unit to enter the
<literal>failed</literal> state (or in fact result in any state change of the unit), it affects
only the job queued for it. Use assertion expressions for units that cannot operate when specific
requirements are not met, and when this is something the administrator or user should look
into.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect2>
</refsect1>
<refsect1>
<title>Mapping of unit properties to their inverses</title>
<para>Unit settings that create a relationship with a second unit usually show up
in properties of both units, for example in <command>systemctl show</command>
output. In some cases the name of the property is the same as the name of the
configuration setting, but not always. This table lists the properties
that are shown on two units which are connected through some dependency, and shows
which property on "source" unit corresponds to which property on the "target" unit.
</para>
<table>
<title>
"Forward" and "reverse" unit properties
</title>
<tgroup cols='4'>
<colspec colname='forward' />
<colspec colname='reverse' />
<colspec colname='fuse' />
<colspec colname='ruse' />
<thead>
<row>
<entry>"Forward" property</entry>
<entry>"Reverse" property</entry>
<entry namest='fuse' nameend='ruse' valign='middle'>Where used</entry>
</row>
</thead>
<tbody>
<row>
<entry><varname>Before=</varname></entry>
<entry><varname>After=</varname></entry>
<entry morerows='1' namest='fuse' nameend='ruse' valign='middle'>[Unit] section</entry>
</row>
<row>
<entry><varname>After=</varname></entry>
<entry><varname>Before=</varname></entry>
</row>
<row>
<entry><varname>Requires=</varname></entry>
<entry><varname>RequiredBy=</varname></entry>
<entry>[Unit] section</entry>
<entry>[Install] section</entry>
</row>
<row>
<entry><varname>Wants=</varname></entry>
<entry><varname>WantedBy=</varname></entry>
<entry>[Unit] section</entry>
<entry>[Install] section</entry>
</row>
<row>
<entry><varname>PartOf=</varname></entry>
<entry><varname>ConsistsOf=</varname></entry>
<entry>[Unit] section</entry>
<entry>an automatic property</entry>
</row>
<row>
<entry><varname>BindsTo=</varname></entry>
<entry><varname>BoundBy=</varname></entry>
<entry>[Unit] section</entry>
<entry>an automatic property</entry>
</row>
<row>
<entry><varname>Requisite=</varname></entry>
<entry><varname>RequisiteOf=</varname></entry>
<entry>[Unit] section</entry>
<entry>an automatic property</entry>
</row>
<row>
<entry><varname>Triggers=</varname></entry>
<entry><varname>TriggeredBy=</varname></entry>
<entry namest='fuse' nameend='ruse' valign='middle'>Automatic properties, see notes below</entry>
</row>
<row>
<entry><varname>Conflicts=</varname></entry>
<entry><varname>ConflictedBy=</varname></entry>
<entry>[Unit] section</entry>
<entry>an automatic property</entry>
</row>
<row>
<entry><varname>PropagatesReloadTo=</varname></entry>
<entry><varname>ReloadPropagatedFrom=</varname></entry>
<entry morerows='1' namest='fuse' nameend='ruse' valign='middle'>[Unit] section</entry>
</row>
<row>
<entry><varname>ReloadPropagatedFrom=</varname></entry>
<entry><varname>PropagatesReloadTo=</varname></entry>
</row>
<row>
<entry><varname>Following=</varname></entry>
<entry>n/a</entry>
<entry>An automatic property</entry>
</row>
</tbody>
</tgroup>
</table>
<para>Note: <varname>WantedBy=</varname> and <varname>RequiredBy=</varname> are
used in the [Install] section to create symlinks in <filename>.wants/</filename>
and <filename>.requires/</filename> directories. They cannot be used directly as a
unit configuration setting.</para>
<para>Note: <varname>ConsistsOf=</varname>, <varname>BoundBy=</varname>,
<varname>RequisiteOf=</varname>, <varname>ConflictedBy=</varname> are created
implicitly along with their reverses and cannot be specified directly.</para>
<para>Note: <varname>Triggers=</varname> is created implicitly between a socket,
path unit, or an automount unit, and the unit they activate. By default a unit
with the same name is triggered, but this can be overridden using
<varname>Sockets=</varname>, <varname>Service=</varname>, and <varname>Unit=</varname>
settings. See
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
and
<citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details. <varname>TriggeredBy=</varname> is created implicitly on the
triggered unit.</para>
<para>Note: <varname>Following=</varname> is used to group device aliases and points to the
"primary" device unit that systemd is using to track device state, usually corresponding to a
sysfs path. It does not show up in the "target" unit.</para>
</refsect1>
<refsect1>
<title>[Install] Section Options</title>
<para>Unit files may include an <literal>[Install]</literal> section, which carries installation information for
the unit. This section is not interpreted by
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> during runtime; it is
used by the <command>enable</command> and <command>disable</command> commands of the
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> tool during
installation of a unit.</para>
<variablelist class='unit-directives'>
<varlistentry>
<term><varname>Alias=</varname></term>
<listitem><para>A space-separated list of additional names this unit shall be installed under. The names listed
here must have the same suffix (i.e. type) as the unit filename. This option may be specified more than once,
in which case all listed names are used. At installation time, <command>systemctl enable</command> will create
symlinks from these names to the unit filename. Note that not all unit types support such alias names, and this
setting is not supported for them. Specifically, mount, slice, swap, and automount units do not support
aliasing.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>WantedBy=</varname></term>
<term><varname>RequiredBy=</varname></term>
<listitem><para>This option may be used more than once, or a
space-separated list of unit names may be given. A symbolic
link is created in the <filename>.wants/</filename> or
<filename>.requires/</filename> directory of each of the
listed units when this unit is installed by <command>systemctl
enable</command>. This has the effect that a dependency of
type <varname>Wants=</varname> or <varname>Requires=</varname>
is added from the listed unit to the current unit. The primary
result is that the current unit will be started when the
listed unit is started. See the description of
<varname>Wants=</varname> and <varname>Requires=</varname> in
the [Unit] section for details.</para>
<para><command>WantedBy=foo.service</command> in a service
<filename>bar.service</filename> is mostly equivalent to
<command>Alias=foo.service.wants/bar.service</command> in the
same file. In case of template units, <command>systemctl
enable</command> must be called with an instance name, and
this instance will be added to the
<filename>.wants/</filename> or
<filename>.requires/</filename> list of the listed unit. E.g.
<command>WantedBy=getty.target</command> in a service
<filename>getty@.service</filename> will result in
<command>systemctl enable getty@tty2.service</command>
creating a
<filename>getty.target.wants/getty@tty2.service</filename>
link to <filename>getty@.service</filename>.
</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>Also=</varname></term>
<listitem><para>Additional units to install/deinstall when
this unit is installed/deinstalled. If the user requests
installation/deinstallation of a unit with this option
configured, <command>systemctl enable</command> and
<command>systemctl disable</command> will automatically
install/uninstall units listed in this option as well.</para>
<para>This option may be used more than once, or a
space-separated list of unit names may be
given.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>DefaultInstance=</varname></term>
<listitem><para>In template unit files, this specifies for
which instance the unit shall be enabled if the template is
enabled without any explicitly set instance. This option has
no effect in non-template unit files. The specified string
must be usable as instance identifier.</para></listitem>
</varlistentry>
</variablelist>
<para>The following specifiers are interpreted in the Install
section: %n, %N, %p, %i, %j, %g, %G, %U, %u, %m, %H, %b, %v. For their
meaning see the next section.
</para>
</refsect1>
<refsect1>
<title>Specifiers</title>
<para>Many settings resolve specifiers which may be used to write
generic unit files referring to runtime or unit parameters that
are replaced when the unit files are loaded. Specifiers must be known
and resolvable for the setting to be valid. The following
specifiers are understood:</para>
<table>
<title>Specifiers available in unit files</title>
<tgroup cols='3' align='left' colsep='1' rowsep='1'>
<colspec colname="spec" />
<colspec colname="mean" />
<colspec colname="detail" />
<thead>
<row>
<entry>Specifier</entry>
<entry>Meaning</entry>
<entry>Details</entry>
</row>
</thead>
<tbody>
<row>
<entry><literal>%b</literal></entry>
<entry>Boot ID</entry>
<entry>The boot ID of the running system, formatted as string. See <citerefentry><refentrytitle>random</refentrytitle><manvolnum>4</manvolnum></citerefentry> for more information.</entry>
</row>
<row>
<entry><literal>%C</literal></entry>
<entry>Cache directory root</entry>
<entry>This is either <filename>/var/cache</filename> (for the system manager) or the path <literal>$XDG_CACHE_HOME</literal> resolves to (for user managers).</entry>
</row>
<row>
<entry><literal>%E</literal></entry>
<entry>Configuration directory root</entry>
<entry>This is either <filename>/etc</filename> (for the system manager) or the path <literal>$XDG_CONFIG_HOME</literal> resolves to (for user managers).</entry>
</row>
<row>
<entry><literal>%f</literal></entry>
<entry>Unescaped filename</entry>
<entry>This is either the unescaped instance name (if applicable) with <filename>/</filename> prepended (if applicable), or the unescaped prefix name prepended with <filename>/</filename>. This implements unescaping according to the rules for escaping absolute file system paths discussed above.</entry>
</row>
<row>
<entry><literal>%h</literal></entry>
<entry>User home directory</entry>
<entry>This is the home directory of the <emphasis>user running the service manager instance</emphasis>. In case of the system manager this resolves to <literal>/root</literal>.
Note that this setting is <emphasis>not</emphasis> influenced by the <varname>User=</varname> setting configurable in the [Service] section of the service unit.</entry>
</row>
<row>
<entry><literal>%H</literal></entry>
<entry>Host name</entry>
<entry>The hostname of the running system at the point in time the unit configuration is loaded.</entry>
</row>
<row>
<entry><literal>%i</literal></entry>
<entry>Instance name</entry>
<entry>For instantiated units this is the string between the first <literal>@</literal> character and the type suffix. Empty for non-instantiated units.</entry>
</row>
<row>
<entry><literal>%I</literal></entry>
<entry>Unescaped instance name</entry>
<entry>Same as <literal>%i</literal>, but with escaping undone.</entry>
</row>
<row>
<entry><literal>%j</literal></entry>
<entry>Final component of the prefix</entry>
<entry>This is the string between the last <literal>-</literal> and the end of the prefix name. If there is no <literal>-</literal>, this is the same as <literal>%p</literal>.</entry>
</row>
<row>
<entry><literal>%J</literal></entry>
<entry>Unescaped final component of the prefix</entry>
<entry>Same as <literal>%j</literal>, but with escaping undone.</entry>
</row>
<row>
<entry><literal>%L</literal></entry>
<entry>Log directory root</entry>
<entry>This is either <filename>/var/log</filename> (for the system manager) or the path <literal>$XDG_CONFIG_HOME</literal> resolves to with <filename index="false">/log</filename> appended (for user managers).</entry>
</row>
<row>
<entry><literal>%m</literal></entry>
<entry>Machine ID</entry>
<entry>The machine ID of the running system, formatted as string. See <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry> for more information.</entry>
</row>
<row>
<entry><literal>%n</literal></entry>
<entry>Full unit name</entry>
<entry></entry>
</row>
<row>
<entry><literal>%N</literal></entry>
<entry>Full unit name</entry>
<entry>Same as <literal>%n</literal>, but with the type suffix removed.</entry>
</row>
<row>
<entry><literal>%p</literal></entry>
<entry>Prefix name</entry>
<entry>For instantiated units, this refers to the string before the first <literal>@</literal> character of the unit name. For non-instantiated units, same as <literal>%N</literal>.</entry>
</row>
<row>
<entry><literal>%P</literal></entry>
<entry>Unescaped prefix name</entry>
<entry>Same as <literal>%p</literal>, but with escaping undone.</entry>
</row>
<row>
<entry><literal>%s</literal></entry>
<entry>User shell</entry>
<entry>This is the shell of the user running the service manager instance. In case of the system manager this resolves to <literal>/bin/sh</literal>.</entry>
</row>
<row>
<entry><literal>%S</literal></entry>
<entry>State directory root</entry>
<entry>This is either <filename>/var/lib</filename> (for the system manager) or the path <literal>$XDG_CONFIG_HOME</literal> resolves to (for user managers).</entry>
</row>
<row>
<entry><literal>%t</literal></entry>
<entry>Runtime directory root</entry>
<entry>This is either <filename>/run</filename> (for the system manager) or the path <literal>$XDG_RUNTIME_DIR</literal> resolves to (for user managers).</entry>
</row>
<row>
<entry><literal>%T</literal></entry>
<entry>Directory for temporary files</entry>
<entry>This is either <filename>/tmp</filename> or the path <literal>$TMPDIR</literal>, <literal>$TEMP</literal> or <literal>$TMP</literal> are set to.</entry>
</row>
<row>
<entry><literal>%g</literal></entry>
<entry>User group</entry>
<entry>This is the name of the group running the service manager instance. In case of the system manager this resolves to <literal>root</literal>.</entry>
</row>
<row>
<entry><literal>%G</literal></entry>
<entry>User GID</entry>
<entry>This is the numeric GID of the user running the service manager instance. In case of the system manager this resolves to <literal>0</literal>.</entry>
</row>
<row>
<entry><literal>%u</literal></entry>
<entry>User name</entry>
<entry>This is the name of the <emphasis>user running the service manager instance</emphasis>. In case of the system manager this resolves to <literal>root</literal>.
Note that this setting is <emphasis>not</emphasis> influenced by the <varname>User=</varname> setting configurable in the [Service] section of the service unit.</entry>
</row>
<row>
<entry><literal>%U</literal></entry>
<entry>User UID</entry>
<entry>This is the numeric UID of the <emphasis>user running the service manager instance</emphasis>. In case of the system manager this resolves to <literal>0</literal>.
Note that this setting is <emphasis>not</emphasis> influenced by the <varname>User=</varname> setting configurable in the [Service] section of the service unit.</entry>
</row>
<row>
<entry><literal>%v</literal></entry>
<entry>Kernel release</entry>
<entry>Identical to <command>uname -r</command> output</entry>
</row>
<row>
<entry><literal>%V</literal></entry>
<entry>Directory for larger and persistent temporary files</entry>
<entry>This is either <filename>/var/tmp</filename> or the path <literal>$TMPDIR</literal>, <literal>$TEMP</literal> or <literal>$TMP</literal> are set to.</entry>
</row>
<row>
<entry><literal>%%</literal></entry>
<entry>Single percent sign</entry>
<entry>Use <literal>%%</literal> in place of <literal>%</literal> to specify a single percent sign.</entry>
</row>
</tbody>
</tgroup>
</table>
</refsect1>
<refsect1>
<title>Examples</title>
<example>
<title>Allowing units to be enabled</title>
<para>The following snippet (highlighted) allows a unit (e.g.
<filename>foo.service</filename>) to be enabled via
<command>systemctl enable</command>:</para>
<programlisting>[Unit]
Description=Foo
[Service]
ExecStart=/usr/sbin/foo-daemon
<emphasis>[Install]</emphasis>
<emphasis>WantedBy=multi-user.target</emphasis></programlisting>
<para>After running <command>systemctl enable</command>, a
symlink
<filename>/etc/systemd/system/multi-user.target.wants/foo.service</filename>
linking to the actual unit will be created. It tells systemd to
pull in the unit when starting
<filename>multi-user.target</filename>. The inverse
<command>systemctl disable</command> will remove that symlink
again.</para>
</example>
<example>
<title>Overriding vendor settings</title>
<para>There are two methods of overriding vendor settings in
unit files: copying the unit file from
<filename>/usr/lib/systemd/system</filename> to
<filename>/etc/systemd/system</filename> and modifying the
chosen settings. Alternatively, one can create a directory named
<filename><replaceable>unit</replaceable>.d/</filename> within
<filename>/etc/systemd/system</filename> and place a drop-in
file <filename><replaceable>name</replaceable>.conf</filename>
there that only changes the specific settings one is interested
in. Note that multiple such drop-in files are read if
present, processed in lexicographic order of their filename.</para>
<para>The advantage of the first method is that one easily
overrides the complete unit, the vendor unit is not parsed at
all anymore. It has the disadvantage that improvements to the
unit file by the vendor are not automatically incorporated on
updates.</para>
<para>The advantage of the second method is that one only
overrides the settings one specifically wants, where updates to
the unit by the vendor automatically apply. This has the
disadvantage that some future updates by the vendor might be
incompatible with the local changes.</para>
<para>This also applies for user instances of systemd, but with
different locations for the unit files. See the section on unit
load paths for further details.</para>
<para>Suppose there is a vendor-supplied unit
<filename>/usr/lib/systemd/system/httpd.service</filename> with
the following contents:</para>
<programlisting>[Unit]
Description=Some HTTP server
After=remote-fs.target sqldb.service
Requires=sqldb.service
AssertPathExists=/srv/webserver
[Service]
Type=notify
ExecStart=/usr/sbin/some-fancy-httpd-server
Nice=5
[Install]
WantedBy=multi-user.target</programlisting>
<para>Now one wants to change some settings as an administrator:
firstly, in the local setup, <filename>/srv/webserver</filename>
might not exist, because the HTTP server is configured to use
<filename>/srv/www</filename> instead. Secondly, the local
configuration makes the HTTP server also depend on a memory
cache service, <filename>memcached.service</filename>, that
should be pulled in (<varname>Requires=</varname>) and also be
ordered appropriately (<varname>After=</varname>). Thirdly, in
order to harden the service a bit more, the administrator would
like to set the <varname>PrivateTmp=</varname> setting (see
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details). And lastly, the administrator would like to reset
the niceness of the service to its default value of 0.</para>
<para>The first possibility is to copy the unit file to
<filename>/etc/systemd/system/httpd.service</filename> and
change the chosen settings:</para>
<programlisting>[Unit]
Description=Some HTTP server
After=remote-fs.target sqldb.service <emphasis>memcached.service</emphasis>
Requires=sqldb.service <emphasis>memcached.service</emphasis>
AssertPathExists=<emphasis>/srv/www</emphasis>
[Service]
Type=notify
ExecStart=/usr/sbin/some-fancy-httpd-server
<emphasis>Nice=0</emphasis>
<emphasis>PrivateTmp=yes</emphasis>
[Install]
WantedBy=multi-user.target</programlisting>
<para>Alternatively, the administrator could create a drop-in
file
<filename>/etc/systemd/system/httpd.service.d/local.conf</filename>
with the following contents:</para>
<programlisting>[Unit]
After=memcached.service
Requires=memcached.service
# Reset all assertions and then re-add the condition we want
AssertPathExists=
AssertPathExists=/srv/www
[Service]
Nice=0
PrivateTmp=yes</programlisting>
<para>Note that for drop-in files, if one wants to remove
entries from a setting that is parsed as a list (and is not a
dependency), such as <varname>AssertPathExists=</varname> (or
e.g. <varname>ExecStart=</varname> in service units), one needs
to first clear the list before re-adding all entries except the
one that is to be removed. Dependencies (<varname>After=</varname>, etc.)
cannot be reset to an empty list, so dependencies can only be
added in drop-ins. If you want to remove dependencies, you have
to override the entire unit.</para>
</example>
</refsect1>
<refsect1>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd-analyze</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry project='man-pages'><refentrytitle>uname</refentrytitle><manvolnum>1</manvolnum></citerefentry>
</para>
</refsect1>
</refentry>
View Git Blame Copy Permalink