IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This provides the UI support for the qemu-vdagent channel which allows
clipboard sharing with VNC graphics (see previous commit for more
information).
The channel name in the device list was changed slightly in order to
avoid confusion. Due to the fact that both the spice-vdagent and the
qemu-vdagent specify the same virtio name (com.redhat.spice.0), both of
these channels were showing up in the device list as "Channel spice",
which is a bit confusing.
In order to disambiguate these, channels now show up in the device list
as "Channel {type} ({name})" instead of "Channel {name}". So for
example, a qemu-vdagent channel would show up as:
Channel Qemu vdagent (spice)
Whereas a spice-vdagent channel would show up as:
Channel Spice agent (spice)
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
- Remove most use of deprecated stock icons. Without it the UI will
be a lot more ugly in Fedora 36
- Remove deprecated ImageMenuItem usage, convert to regular MenuItem
- Remove most embedded button images
Signed-off-by: Cole Robinson <crobinso@redhat.com>
If the user selects virtiofs when editting or adding a new VM, and
we don't detect that they have shared memory enabled, show
a warning label in the UI pointing them to the Memory screen.
It would be nicer if we did this for them, but to get that totally
correct would require both duplicating libvirt's shared memory
detection logic, and some surgery to the addhw wizard. This is good
enough for now
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We only ever show mapped vs squashed, and the difference is pretty
advanced, so if users need it they can use the XML editor. Upcoming
virtiofs support will also make handling this field more complicated
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Split out tpmdetails.py, following the pattern of fsdetails.py. This
adds more UI editing fields for an already attached TPM.
Move the model and version under an 'Advanced options' expander,
since we should be getting this correct by default.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Have the UI push users more towards better defaults, by discouraging
the 'generic' entry and offering the 'linuxXXXX' entries when their
distro or OS version is not in the list.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
After checking with qemu devs, this option is not really recommended
for common usage and doesn't get used much in practice. So I don't
think it is suitable for the UI
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* Make it clear in code and UI that this is x86 only. Other arches
either require UEFI (aarch64) or don't support it
* Drop the internal 'bios' values since we don't handle them and may
not want them anyways, since when win11 support lands we will need
to explicitly throw an error if the user tries to force bios
* Add UI tests
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Possible values are BIOS (default) and UEFI.
The firmware used is determined by libvirt unless a specific firmware is
selected from the Customize dialog.
See https://bugzilla.redhat.com/show_bug.cgi?id=1997882
It creates a lot of churn.
Adjust phantom grid rows + columns while we are at it, not sure why
those counts are suddenly wrong
Signed-off-by: Cole Robinson <crobinso@redhat.com>
I removed Portgroup UI in 4c3c53f773 release 3.0.0, but there's been
a steady stream of requests to bring it back. It seems it's commonly
used with some certain openvswitch config.
Maint burden isn't too bad. Let's bring it back
Fixes: https://github.com/virt-manager/virt-manager/issues/169
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The virtiofs in domcapabilities is used as a proxy to tell us whether
libvirt is new enough to allow bare memory access mode=shared', So We
enable/disable this checkbox according to it.
When we configure shared memory access, If the 'memfd' is available in
domcaps, We configure VM to use it as memory backend because it doesn't
need addtional host setup for vhost-user devices, Otherwise use 'file'
as backend.
If all of numa nodes explicitly defined memAccess=shared, We mark this
checkbox as checked even if virtiofs isn't exposed in domcapabilities.
In this case:
- It doesn't matter what the value of access mode of memoryBacking is
because access mode of memoryBacking will be overridden per numa node
by memAccess attribute.
- Although the checkbox is disabled, the checked checkbox presents actual
status about shared memory access to users.
Signed-off-by: Lin Ma <lma@suse.com>
* Simplify start() and end() function signature
* Drop use of 'basename' and standardize on 'text'
* Add vmmMeter.is_started()
* Add vmmMeter.set_text()
* Fix asyncjob UI to show text in the progress bar
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Make it work more like gfxdetails. The problem with the current
approach is that it requires effectively rebuilding the whole device
to match the original device when we want to edit a single field,
which is error prone.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
If something would normally be shown only in a label, just
hide the row entirely. This was interesting for viewer XML
properties before we had the XML editor, but now it doesn't
add much
Signed-off-by: Cole Robinson <crobinso@redhat.com>
And absord device building from addhardware. This moves all the
knowledge to gfxdetails, which saves sprinkling it around in other
places
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Close accelerator changes ctrl+w -> ctrl+shift+w
Quit accelerator changes ctrl+q -> ctrl+shift+q
After aafb874c8, if the mouse pointer isn't inside the console
window, it has keyboard focus but ctrl+w will be sent to the vmwindow
and not the VM. ctrl+w is a common shortcut for deleting a word so
this is pretty disruptive if you are typing inside the VM
Use gnome-terminal-esque accelerators starting with ctrl+shift to
reduce the chance of collision.
https://bugzilla.redhat.com/show_bug.cgi?id=1880295
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Inspired by some discussion from here:
https://bugzilla.redhat.com/show_bug.cgi?id=1759454
Most libvirt storage volume creation doesn't actually do anything
with allocation, besides interpreting cap == alloc and cap != alloc.
The exceptions are zfs volumes, and raw file volumes. But it's unclear
what the usecase is for the latter at all.
This drops the allocation spinner and adds checkbox in its place
'Allocate entire volume now'. When enabled, it sets cap == alloc.
We only show this for file volumes. For qcow2 it defaults to unselected
(sparse), for all others it defaults to selected. If it's not showing,
it defaults to selected.
Bundled with this change is showing this field for qcow2, where
we previously only allowed nonsparse here. Libvirt and qemu-img
support non-sparse qcow2 these days.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is another preference that was added before anyone ever asked
for it. I'm fine with suggesting users remove the device manually
if they don't want it
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Remove the preference option to disable this. This was added with
the initial usbredir support because I was afraid people would
complain. They did complain, but only about the auto redir behavior
of the spice client. We still have a toggle to disable that behavior
If people don't want usbredir devices, I'm comfortable telling
them to remove them manually, or use virt-install
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Instead of using the title of the dialog and prepending the connection
label, create a new title as a single string. This way it is possible to
translate this title as single sentence.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Use a single label to show the single sentence describing the available
space on the storage pool. This avoids the use of 3 different labels,
partially translated separately, and whose content cannot be moved.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
As part of making virt-manager cooperate better with external viewers,
add an option to disable console autoconnect. When opening a VM window
for a running VM, you'll see a 'Connect to console' button in place
of the spice/vnc viewer. Click that and things proceed like normal.
This is useful to prevent virt-manager from disconnecting a virt-viewer
instance that's already attached to a VM
https://bugzilla.redhat.com/show_bug.cgi?id=1793876
Signed-off-by: Cole Robinson <crobinso@redhat.com>
- Add ui/console.ui for console-pages and below
- Add move auth and graphics unavailable pages to a new subnotebook
- Move all the menubar handling up into vmwindow
- Clarify the control flow as much as I can come up with
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* Move all the menu building to its own class, for clarity
* Rename the menu 'Consoles' since it contains graphical choice as well
* Strip out the VM console duplicate if it exists
* Simplify the code a bit
Signed-off-by: Cole Robinson <crobinso@redhat.com>
coreos is going to start using disk serial for ignition disk, so
setting this in the UI for distro testing will become more common
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Share the UI for changing all these disk properties:
- shareable
- readonly
- removable
- cache
- discard
- detect zeroes
Move them all under the 'Advanced options' expander in details, and
add the checkbox options to the addhardware wizard.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Allows the user to tweak the XML at the destination, which is already
something that libvirt supports
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* Drop the network editing, users can use the details window
* Drop the combo box approach in favor of a regular treeview
* Drop a lot validation checks which are redundant with modern
virtinst. We probably lose some checks but I don't think it's
too important
* Use the cloner API
* Add uitest coverage
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Refactor the internals to cleanly separate the pieces that fill in
the UI, and the pieces that react to UI state to dynamically show/hide
fields.
Improve spice GL warnings while he are here, and several other minor
fixes
Signed-off-by: Cole Robinson <crobinso@redhat.com>
RAM is rarely changed from the default
heads does not have any explicit virt-manager support
and both are viewable from the XML editor.
So remove the explicit fields for them
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is pretty obscure, and if it's problematic then libvirt
or qemu should be throwing an error or otherwise reporting it
Signed-off-by: Cole Robinson <crobinso@redhat.com>