IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
There are two domain XML knobs specific to NVDIMMs that
virt-install doesn't allow to set: <pmem/> and <alignsize/>.
Implement them.
Closes: https://github.com/virt-manager/virt-manager/issues/267
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As already done for a few architectures, let's add the default
graphics when using aarch64.
This has been tested on a NVIDIA Jetson Xavier NX SBC.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
This has been reported for the libvirt qemu driver since v1.3.5,
released June 2016. But we need to keep some fallback logic for
the test driver, and to keep the testsuite happy
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Enable virt-manager GUI to support add, edit, remove, hot-plug and
hot-unplug of mediated devices (like DASDs, APQNs and PCIs) in virtual
server.
It is not possible to edit MDEV when a virtual server is in
running state, as this is not supported by libvirt.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Implement kvm.poll-control.state to `virt-install --feature`. It requires
libvirt >= v6.10.0.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
Implement "<transient shareBacking=yes/>" to virtinst to allow a transient disk
to be shared across VMs. It is introduced to libvirt since:
75871da0ec qemu: Allow <transient> disks with images shared accross
VMs
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
Since libvirt v6.9, the element <transient/> is to configure a disk
which discards its changes while VM was active. Support this element
by cmdline option `--disk ...,transient=on`.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
Support rotation_rate attrib which is introduced since libvirt v7.3.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
xorisso is the still maintained isoinfo alternative, and may be
the only iso reading tool in RHEL9, so we need to support it.
Make it the default for our spec file and test suite too
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add support to install a virtual server with passed-through mediated
device. Mediated device can be created using vGPU attached to
vfio_pci driver or DASD attached to vfio_ccw driver or APQNs attached
to vfio_ap driver.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
This adds the following suboptions to configure <cputune>:
- vcpusched.vcpus
- vcpusched.scheduler
- vcpusched.priority
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
Bhyve only supports nmdm console type, so use it instead of TYPE_PTY.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Bhyve requires explicit loader configuration. So query
domain capabilities, try to find the "official"
firmware and configure all the necessary loader options.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Choose SATA as a default bus for bhyve as it doesn't support IDE.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Various checks in the test suite try to match for error/status messages,
so using a localized libvirt (or even using translations of an installed
version of virt-manager in the system) makes those check fail.
Hence, force (using $LANG, and unsetting $LANGUAGE) an English UTF-8
locale.
Thanks Cole Robinson for spotting the right place where to inject the
locale settings.
Fixes: #199
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Make it work more like gfxdetails. The problem with the current
approach is that it requires effectively rebuilding the whole device
to match the original device when we want to edit a single field,
which is error prone.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This makes it more clear that 'path' is really a special designation
with a bunch of complicated logic behind it. It's also easier to
grep for
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We do this by faking an install phase whenever cloudinit media is
specified, which isn't really the right abstraction and will leak
into virt-install behavior (like doing 2 boots), but it's the simplest
fix for now
Fixes: #178
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1883008
In the example above this is because the VM XML has an invalid machine
type, so domcaps fetching entirely fails, and a get_enum() call
then fails. But this could happen if using virt-manager against an
older libvirt that doesn't advertise the enum
Signed-off-by: Cole Robinson <crobinso@redhat.com>
delete and createvm tests launch a dialog which obstructs the
manager UI. The location can be kinda random, and it might obstruct
selecting the connection in the manager window. Go back to using
the drag() window pattern to make this more deterministic
Signed-off-by: Cole Robinson <crobinso@redhat.com>
And absord device building from addhardware. This moves all the
knowledge to gfxdetails, which saves sprinkling it around in other
places
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Close accelerator changes ctrl+w -> ctrl+shift+w
Quit accelerator changes ctrl+q -> ctrl+shift+q
After aafb874c8, if the mouse pointer isn't inside the console
window, it has keyboard focus but ctrl+w will be sent to the vmwindow
and not the VM. ctrl+w is a common shortcut for deleting a word so
this is pretty disruptive if you are typing inside the VM
Use gnome-terminal-esque accelerators starting with ctrl+shift to
reduce the chance of collision.
https://bugzilla.redhat.com/show_bug.cgi?id=1880295
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Historically we have not advertised host-passthrough because it was
not recommended for general usage. That stance is softening,
tools like gnome-boxes already set it as the default, and users
continue to ask about it.
We may change the default in virt-manager but it will take more
discussion. This is a tiny move in the direction of hiding it less
than we already do.
Drop the label for host-model and call it by its libvirt XML name,
since otherwise it's hard to tell which combo choice is for each
value
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Inspired by some discussion from here:
https://bugzilla.redhat.com/show_bug.cgi?id=1759454
Most libvirt storage volume creation doesn't actually do anything
with allocation, besides interpreting cap == alloc and cap != alloc.
The exceptions are zfs volumes, and raw file volumes. But it's unclear
what the usecase is for the latter at all.
This drops the allocation spinner and adds checkbox in its place
'Allocate entire volume now'. When enabled, it sets cap == alloc.
We only show this for file volumes. For qcow2 it defaults to unselected
(sparse), for all others it defaults to selected. If it's not showing,
it defaults to selected.
Bundled with this change is showing this field for qcow2, where
we previously only allowed nonsparse here. Libvirt and qemu-img
support non-sparse qcow2 these days.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1759454
See 15a6a7e210
The idea behind virt-manager's sparse vs nonsparse default, is that if
the user selected 'raw' for as the default image format, assume they
want to maximize performance, so fully allocate the disk.
qcow2 didn't support anything except sparse, so the sparse=True vs
sparse=False made no difference. So we always set sparse=False
Then qcow2 grows non-sparse support, and virt-manager is suddenly
defaulting to it, which is not the intention.
Default to sparse when requested format isn't raw
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is another preference that was added before anyone ever asked
for it. I'm fine with suggesting users remove the device manually
if they don't want it
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Remove the preference option to disable this. This was added with
the initial usbredir support because I was afraid people would
complain. They did complain, but only about the auto redir behavior
of the spice client. We still have a toggle to disable that behavior
If people don't want usbredir devices, I'm comfortable telling
them to remove them manually, or use virt-install
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* Convert to pytest style functions
* Move lots of shared code to our App class
* Reduce dogtail sleep amounts to speed up the whole testsuite
* Improve robustness in a lot of areas
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For the few bits we are hitting specific code paths, break them
out or fold them into other test cases
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Make use of the new helper for showing a standard error message for two
conflicting cli options. This also catches one untranslatable message.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Instead of using the title of the dialog and prepending the connection
label, create a new title as a single string. This way it is possible to
translate this title as single sentence.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Latest libvirt uses socket activation, so libvirtd.service in
offline state does not indicate a problem necessarily.
Also on Fedora nowadays we have a weak RPM dependency on
libvirt-daemon which we didn't in the past.
Both things combine to make this code less useful and less accurate,
so let's remove most of it.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virtManager/createvm.py:982:8: W0128: Redeclared variable 'ignore' in assignment (redeclared-assigned-name)
tests/uitests/lib/app.py:12:0: C0411: third party import "from gi.repository import Gio" should be placed before "import dogtail.rawinput" (wrong-import-order)
Signed-off-by: Chen Hanxiao <chenhx.fnst@cn.fujitsu.com>
If specified, this errors if no OS name was detected or manually set.
So --os-variant detect=on,require=on will error if no OS is detected.
name= can be used as a fallback, so test and document this case
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This adds the following --os-variant suboptions
* name=, short-id=
* id=
* detect=on|off
Functionally this does not change behavior, just adds explicit
sub options for behavior we already support
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The --os-variant option naming is pretty crappy and mostly a historical
artifact. Ideally this would be named just `--os` but I'm afraid that
would cause confusion with libvirt's <os> XML
Add --osinfo as an alternate commandline naming. If we ever want to
transition documented use of --os-variant it will help to have the
alternative around for a few releases
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The --xml option allows users to request raw XML edits to virt-install
or virt-xml generated XML. This gives users a bit of a workaround
incase we don't have proper support for some XML property. The --xml
option can gain more features in the future if it makes sense, like
setting XML namespaces for example.
Basic usage is like: virt-install --xml ./@foo=bar ...
Which will change the generated <domain> XML to have
<domain foo='bar' ...
virt-xml works similarly. It can only be combined with --edit currently.
This only works with xpaths rooted against the entire document.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Break utils.py apart into a whole uitests/lib/ directory with
* lib/_dogtailinit.py: all the dogtail library init we need
* lib/_node.py: extending our dogtail node class with more functions
* lib/app.py: VMMDogtailApp
* lib/util.py: util functions plus all the special helpers previously
in our custom TestCase
* lib/testcase.py: The TestCase that sets and tears down self.app
Adjust callers to match and make it easier to eventually convert to
native pytest usage
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This uncovered some areas in details.py we weren't handling that
the search view unselects the current selection
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Similar to behavior we have in virt-manager, if the user destroys the
VM during the VM install process, don't invoke the post install
reboot.
https://bugzilla.redhat.com/show_bug.cgi?id=1818089
Signed-off-by: Cole Robinson <crobinso@redhat.com>
As part of making virt-manager cooperate better with external viewers,
add an option to disable console autoconnect. When opening a VM window
for a running VM, you'll see a 'Connect to console' button in place
of the spice/vnc viewer. Click that and things proceed like normal.
This is useful to prevent virt-manager from disconnecting a virt-viewer
instance that's already attached to a VM
https://bugzilla.redhat.com/show_bug.cgi?id=1793876
Signed-off-by: Cole Robinson <crobinso@redhat.com>
When a VM window is launched for the first for a VM, currently we
set the top window size to 800x600 which is small and arbitrary and
is universally shrinks the viewer too much to fit any OS installer
I can find.
Instead do some hacks to resize the window to accomodate a viewer
widget of 1024x768 which seems to be what QXL graphics give us for
win10 and Fedora 32 installers. So for new VMs hitting the OS installer
we don't see scrollbars.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Right now this is tied to widget focus, which is too strong. This
changes it so that say clicking on the window title or toolbar then
allows the user to use Alt+F to trigger the File menu for example.
This roughly matches how virt-viewer works
https://bugzilla.redhat.com/show_bug.cgi?id=1824480
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* Move all the menu building to its own class, for clarity
* Rename the menu 'Consoles' since it contains graphical choice as well
* Strip out the VM console duplicate if it exists
* Simplify the code a bit
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* rename kernelupload.py to volumeupload.py and make the entrypoint
more generic
* move all upload invocation to the Installer class
* use it with cloudinit and unattended ISO generation if required
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is a quirk of libvirt that the first <device> is usually a
logical duplicate of the first <serial> device. Adjust virt-xml to
understand this quirk and remove both devices at the same time,
like we already do in virt-manager
https://bugzilla.redhat.com/show_bug.cgi?id=1685541
Signed-off-by: Cole Robinson <crobinso@redhat.com>
coreos is going to start using disk serial for ignition disk, so
setting this in the UI for distro testing will become more common
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Share the UI for changing all these disk properties:
- shareable
- readonly
- removable
- cache
- discard
- detect zeroes
Move them all under the 'Advanced options' expander in details, and
add the checkbox options to the addhardware wizard.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Allows the user to tweak the XML at the destination, which is already
something that libvirt supports
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* Drop the network editing, users can use the details window
* Drop the combo box approach in favor of a regular treeview
* Drop a lot validation checks which are redundant with modern
virtinst. We probably lose some checks but I don't think it's
too important
* Use the cloner API
* Add uitest coverage
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This let's us move more of the preserve logic to virtclone.py
and prep more things to share with virt-manager
Signed-off-by: Cole Robinson <crobinso@redhat.com>
test:///default saves changes for the lifetime of the connecting
process, which can cause weird interdependent issues in the test
suite. Duplicating it with driver XML will avoid those issues
popping up.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* Centralize lots of disk building
* Open code virt-clone specific behavior at the source
* Drop a lot or properties
* Move most testing to test_cli.py
* Generally a ton of cleanup
virt-manager clone wizard has not been converted yet so is totally
broken after this commit
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Cover more cases via the virt-clone CLI testing, than just the
test_cloner.py unit style testing.
Change most of the virt-clone --print-xml testing to also attempt the
clone operation as well via a hidden cli option, to ensure we aren't
testing XML of any bogus operations
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is just a test suite hack from before we had other methods
of specifying cloneable guests. It will be removed soon
We need to tweak some test XML to fix code coverage after
Signed-off-by: Cole Robinson <crobinso@redhat.com>
As much as we can. There's not any current way to actually test
the full guestfs implementation, so we exclude it all
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Refactor the internals to cleanly separate the pieces that fill in
the UI, and the pieces that react to UI state to dynamically show/hide
fields.
Improve spice GL warnings while he are here, and several other minor
fixes
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Make it explicit that all uses of this is actually the object
name. We already leaked this abstraction in several places so better
to make it explicit. This also communicates to users that this is a
field that is not immutable so it shouldn't be used as a unique key
Signed-off-by: Cole Robinson <crobinso@redhat.com>
qxl doesn't add anything for the VNC case, and qxl is more likely
to be compiled out of qemu since it is dependent on spice, so vga
is the safer default for getting a working config
https://bugzilla.redhat.com/show_bug.cgi?id=1833704
Signed-off-by: Cole Robinson <crobinso@redhat.com>
- create a versioned directory for the current VERSION file, fixing the
typo in the distro name
- move the test to an own function
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
This code path was never hit because it came after caps.guest_lookup
which errors in this case. We need to check things earlier
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In all modern local cases we will be using openFD to get a direct
file descriptor from the VM, so this code should never be triggered
nowadays
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Break it into disable-libguestfs, fake-systemd-success, and
firstrun-uri suboptions, and adjust using code to match
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Always force a network selection. If we have to fall back to
manual bridge UI because nothing else exists, show a warning.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The versions we are warning about are all over 4 years old, and
these warnings were initially just informative to help users know
when the config wasn't going to work. Drop most of it. Still warn
in the UI when a VM misconfig will prevent spice GL from working
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We need to wire up some craziness to make path permission
searching fail, but this is a critical area to get correct
so it is worth it
Signed-off-by: Cole Robinson <crobinso@redhat.com>
I don't think many, if any, people are using virt-manager with
openvz. Drop the specific handling the filesystem UI, users can use
the raw XML editor if they need special behavior
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add data/urldetect with a bunch of distro tree content to trigger
full code coverage of virtinst/install/urldetect.py
Signed-off-by: Cole Robinson <crobinso@redhat.com>
osinfo library doesn't return data for these with the fedora 32
version, so it's hard to get coverage testing. Since we aren't
even using this code yet anyways, let's remove it until it is needed
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We want to skip these tests if previous tests failed or were skipped,
but current impl depends on unittest specifics. Move it to pytest
Signed-off-by: Cole Robinson <crobinso@redhat.com>
pytest invocations are now preferred. Leave plain `./setup.py test`
as a stub that errors and points to pytest.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Makes 'pytest' and 'pytest --cov' work for the standard tests.
uitests run with `pytest --uitests --cov=virtManager`.
test_urls.py, test_dist.py, test_inject.py need to be invoked like
pytest $PATH
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Use single strings with proper placeholders for texts, so there is no
need to join together bits of translated texts.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Change the label for a generic OS to "Generic OS", and making it
translatable.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Add a --iommu option to configure IOMMU parameters as described in
https://libvirt.org/formatdomain.html#elementsIommu
E.g. 'virt-install --iommu model=intel,driver.aw_bits=48,driver.iotlb=on ...'
will generate the following domain XML:
<devices>
<iommu model="intel">
<driver aw_bits="48" iotlb="on"/>
</iommu>
</devices>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
There's valid cases where a VM can be defined with a conflicting MAC
address. Prior to ebd6091cc8 and related refactorings we were more
lax here if the conflicting VM wasn't running, but now we are blocking
some valid usage.
Hoist the validation check up to cli.py and add --check mac_in_use=off
to skip the validation. Advertise it like we do for other checks, so
now a collision error will look something like:
The MAC address '22:11:11:11:11:11' is in use by another virtual
machine. (Use --check mac_in_use=off or --check all=off to override)
Reported-by: Pino Toscano <ptoscano@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Users are fond of using "--tpm /dev/tpm0" to create a TPM device
for their VMs. ppc64 users, however, are experiencing errors because
the default TPM model is 'tpm-tis', which does not work in ppc64, and
they need to specify 'model=tpm-spapr' to work around that.
This patch makes the default TPM model change to 'tpm-spapr' when
running virt-install on a ppc64 host. A new test was added in test_cli.py
to test this new condition. This also keeps the 100% coverage of
the tpm.py file.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
CC: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
CC: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
codespell complains that one of the asserts is a typo:
tests/test_xmlconfig.py:92: ba ==> by, be
Using single quote strings in that assert will make codespell
pass. For consistency, let's change all the strings in the
test to be single quoted.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will avoid codespell flagging 'msdos' as a typo.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Ubuntu 20.04 has a new installer, which is yet not supported by
virt-install / osinfo-db, and this made ubuntu switch their URLs
for the old installer to current/legacy-images/... instead of
current/images/...
Let's adapt URL detect so it can deal with this new "legacy"
style.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Rather than build a guest and installer instance depending on where
we are in the UI, track each input property in an explicit class, so
we can rebuild the guest/installer on demand with data accumulated
up to that point.
This makes the flow easier to follow and simplifies a lot of hacks we
have to do when backing up through the wizard, because we are trying
to unwind changes from an existing object, rather than just blowing
it away and easily reassembling it with updated info.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Replace the is_session and is_system distinction with variants
of is_privileged. This matches what libvirt uses internally, and
will help with supporting qemu:///embed at some point
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Rather than individual options for each possible hypervisor,
and annotations like 'remote' or 'session', just have it take a
fake URI to mock
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Googling for 'Graphics requested but DISPLAY is not set' shows there's
some confusion about virt-install's behavior in this area. This gives
more output in several related cases about what commands we are
running and the state of the VM
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Currently if the path isn't managed on a remote connection we
treat it as file. Add this simple heuristic to improve the common
case.
https://bugzilla.redhat.com/show_bug.cgi?id=1726202
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Generally this doesn't work with qemu metadata locking nowadays,
and it was never a safe idea to begin with, because disk contents
could be in an inconsistent state.
https://bugzilla.redhat.com/show_bug.cgi?id=1725330
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This reworks the existing code to never have storage_backend = None,
instead carrying around a stub class, and resolving the actual
storage info when necessary. This makes the logic easier to follow.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The way we set controller_model earlier, means all the virtio-scsi
allocation code is essentially never set. That code does still fix
a valid case of when trying to add a scsi device when there isn't
any remaining slots open, but that should be rare enough that I'm
fine telling the user to edit manually set up a controller themselves
first.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Taken from virt-manager code. Move it here because it is strictly
an XML operation, and it will be easier to unit test
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Move the opencoded impl out of virt-manager details.py and into
virtinst, since this is entirely about XML comparison. Add tests for
it
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This layout is closer to what most python modules have nowadays.
It also simplifies testing and static analysis setup.
Keep virt-* wrappers locally, for ease of running these commands
from a git checkout.
Adjust the wrapper binaries we install on via packaging to be
pure python, which makes things like running gdb easier.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For the dialog flow, these options are the same, the only effect
is that there's no longer an initial network boot phase.
PXE is dependent on an external server setup that is not common
in the scheme of things, so giving it a first class option on the
front of the new VM wizard isn't really sensible. Users that want
to PXE boot can easily do so via the 'customize before install'
option, or just manually create a VM and edit the boot device as
they see fit.
Explicitly advertising a Manual option is nicer for users that
just want to create a VM and deal with install later, among many
other minor use cases.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add an info message that these can be set via the
'Customize before install' option. Duplicating this doesn't add a ton
of value here IMO
Signed-off-by: Cole Robinson <crobinso@redhat.com>
There are no more users of interface objects in the code. Remove
all the polling support, and all the remaining references to
interface objects throughout the code base
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Some related bits were discussed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
macvtap is problematic for inexperienced users so we shouldn't
be broadly advertising it, plus our device listing was incomplete
anyways.
Both bridge and macvtap device listing are largely dependent on
the libvirt virInterface APIs, which have varying degrees of
completeness across distros and are not particularly reliable to
begin with.
Drop both of these in favor of the available support for manually
specifying a device name
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Similar to the bridge option. We will be removing the explicit
device listing support soon, so this will be required for specifying
a macvtap device
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Some related bits were discussed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* macvtap is kinda problematic in general because it doesn't provide
out of the box host<->guest communication, and it requires a
special XML option just to get working ipv6. Users that know they
want it usually know this distinction, but if someone chooses it
without understanding the implications it can cause confusion.
This puts it hovering the intermediate/advanced user line which
makes me want to not advertise it as prominently as we currently do,
with an explicit list of host interfaces
"""
Part of this is that the only source_mode that will work in a useful
way for the vast majority of users is mode=bridge. Any of the other
modes either require special hardware, permissions, or other
configuration. Default to bridge mode. The XML editor is there for
anyone that knows they need something different
Signed-off-by: Cole Robinson <crobinso@redhat.com>
portgroups are a way to group logical chunks of settings inside
a <network> object. They are a quite advanced feature that I expect
many few users are using, and the ones that are using it are certainly
advanced enough to edit the XML directly.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is pretty obscure, and requires a large amount of UI surface
to handle correctly. Users can use the XML editor if they know they
need or want this.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* disk: bus editing: maybe keep this for the customize wizard, but
it should go away for existing disks, changing it for an existing VM is
definitely a 'shoot yourself in the foot' type of thing for most users
"""
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* UI maxmem and maxcpu notions, and related memballoon and cpu hotplug
operations. These have been in the UI forever but I'm not sure people
actually use them. cpu hotplug has always been a mess, and unless the
user plans ahead by setting a high maxmem value ballooning is only good
for reducing memory. These all sound like advanced usage to me that
just confuses the typical usecase of adding more mem or vcpus to an
offline VM. And the hotplug operations with virsh are simple to invoke.
So I'd like to drop this from the UI
"""
The remaining field sets both max and current memory in the
inactive XML
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* UI maxmem and maxcpu notions, and related memballoon and cpu hotplug
operations. These have been in the UI forever but I'm not sure people
actually use them. cpu hotplug has always been a mess, and unless the
user plans ahead by setting a high maxmem value ballooning is only good
for reducing memory. These all sound like advanced usage to me that
just confuses the typical usecase of adding more mem or vcpus to an
offline VM. And the hotplug operations with virsh are simple to invoke.
So I'd like to drop this from the UI
"""
The remaining UI field now sets both maximum and current VCPU
allocation.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* network virtualport configuration: this is some really obscure
stuff for configuring VEPA for macvtap devices. I don't think it gets
any usage in practice. I think a smaller subset of this UI is shared
with openswitch config but I believe it's just a single field, we
could keep that even though I don't think many people use it either
"""
This removes it all. The openvswitch piece was not properly wired
up anyways, since it requires setting virtualport type for a bridge.
For users that know they need that, they can add it via the XML
editor.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Errors from libvirt can be super long, and stretch out the dialog like
crazy.
This causes some changes in test suite output, so adjust tests to
match
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
The default driver_io value we use seems to be sufficient. It's very
rare to hear that users need to change the value to something
different, and if they do, they are advanced enough users that can
edit the XML directly IMO.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We have lots of spapr-* pretty printing and some magic handling
spread around the codebase. These devices have fallen out of favor
and are rarely used, so drop the special handling
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* disk: storage format: this was from before the days when we
storage-ified everything and we could get the disk format wrong, telling
qemu it has a raw image when it's qcow2. shouldn't be needed anymore for
normal virt usage
"""
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was proposed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
"""
* disk: serial: I know this is useful in some cases but seems quite
obscure. I think the XML editor is fine unless there's some common
usecase I'm missing
"""
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was discussed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
tlsPort is an advanced config feature. With the XML editing support,
it's less important to have this as a first class UI element. Users
that know they need this setting can set it directly in the XML
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This was raised here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
Quoting from that:
"""
virt-convert takes an ovf/ova or vmx file and spits
out libvirt XML. It started as a code drop a long time ago that could
translate back and forth between vmx, ovf, and virt-image, a long dead
appliance format. In 2014 I converted it to do vmx -> libvirt and ovf ->
libvirt which was a CLI breaking change, but I never heard a peep of a
complaint. It doesn't seem to do a particularly thorough job at its
intended goal, I've seen 2-3 bug reports in the past 5 years and
generally it doesn't seem to have any users. Let's kill it. If anyone
has the desire to keep it alive it could live as a separate project
that's a wrapper around virt-install but there's no compelling reason to
keep it in virt-manager.git IMO
"""
Nothing has changed since then, so here is the removal.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Removing this was discussed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
This is the old default, where we would try to determine a static
keymap value from host graphics config files, and set that in the
XML.
We haven't defaulted to this for a long time, setting a static keymap
is suboptimal generally, and the file parsing code is not up to date
for modern host config. So let's remove it
The hostkeymap module is now unused, so remove it and all the custom
testing for it.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Removing this was discussed here:
https://www.redhat.com/archives/virt-tools-list/2019-June/msg00117.html
For a decade, qemu and xen and virt-manager work together to
make setting a manual keymap redundant. Advertising it in the UI does
more harm than good, because users may think they need to specify
one when in the vast majority of cases it will give worse behavior.
With the XML editing UI, users still have a way to do this by hand
if they really know what they are doing.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We shouldn't be validating against a static list of keymaps,
instead we should let libvirt or the hypervisor throw and error.
Also the accompanying code is about to be removed.
It's possible this will break command line usage for some users, like
if they were passing keymap=US and depending on our logic to lower()
it for them. I think this should be rare, and IMO it's acceptable to
tell users to just fix their command line, which should work correctly
with older versions too, so it should be a one time fix.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
My previous patch was misguided as pointed out by Pavel:
https://github.com/virt-manager/virt-manager/issues/73#issuecomment-574680435
And it was setting incorrect memory, which I missed because the tests
are busted here. Add a hack to work around that
Bump up the default to 1024, and print it, so the user can tell if
the default is not to their liking
Signed-off-by: Cole Robinson <crobinso@redhat.com>
AFAICT the driver doesn't really do anything with it, but libvirt
XML requires it. So just default to --memory 64
Fixes: #73
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We need to restore logging after calling the cli tools. Centralize
the logging reset behavior since we need that too
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Libvirt is able to figure this out and it will make usage of the CLI
options more user-friendly.
For example if users wants to add a new pcie-root-port to existing VM
they have to figure out the latest controller index and call it like
this:
virt-xml \
--add-device \
--controller pci,model=pcie-root-port,index=$nextIndex \
$VM
After this change it will be simply:
virt-xml \
--add-device \
--controller pci,model=pcie-root-port \
$VM
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Cloud images all work nicely with text output, and it's likely
the preferred native way to connect to the guest vs graphical.
Plus it simplifies generated password copy+paste
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Now --cloud-init defaults to root-password-generate=yes,disable=yes.
Option for plaintext password given through the cli is completely removed.
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Signed-off-by: Athina Plaskasoviti <athina.plaskasoviti@gmail.com>
Tests now cover default --cloud-init behavior, and
root-password=(generate and given password),disable=no.
Signed-off-by: Athina Plaskasoviti <athina.plaskasoviti@gmail.com>
When running virt-install as root, user-login would be automatically set
to "root", causing an installation failure in the most part of the
distros (if not all of them).
In order to avoid such failures, let's raise a runtime error in case the
user-login used is "root".
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Let's allow setting the login of the guest user.
Using the user from the system is a quite good fallback, but would break
unattended installations when running virt-install as root. Thus, for
those cases, it makes sense to have the option of setting the user
login.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
As some OSes, as Fedora, have variants (which we rely to be standardised
on osinfo-db side), let's select the most appropriate variant according
to the selected profile of the unattended installation.
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
Some OSes, as Fedora, have variants (which we rely to be standardised on
osinfo-db side), which we can use to return the most generic tree
possible, in case no profile is specified, in order to avoid failing to
install a "Workstation" system because a "Server" variant tree was used.
https://bugzilla.redhat.com/show_bug.cgi?id=1749865
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
QEMU version 2.12.1 introduced a performance feature under commit
be7773268d98 ("target-i386: add KVM_HINTS_DEDICATED performance hint").
Support for this performance hint was added in libvirt 5.7.0 by commit
cb12c59dac04 ("qemu: support for kvm-hint-dedicated performance hint").
This patch extends virt-install's existing --features option to insert the
appropriate XML into the guest definition if this feature is specified
on the command line.
E.g. --features='kvm.hint-dedicated.state=on' would result
in the following XML:
<features>
...
<kvm>
<hint-dedicated state='on'/>
</kvm>
...
</features>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Menno Lageman <menno.lageman@oracle.com>
Some osed have multiple short-ids, like debian10 also has debianbuster.
Use the API if it's available. This will make it easier to remove
our back compat aliases eventually
This was originally added so we had stable paths in the XML. It's
not required anymore, and if it becomes an issue we should fix it
by scrubbing the compared xml
