IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Shuffling bits of code around, adding comments and grouping CLI options
to make the code easier to read and understand at a glance.
Brings the ordering of XML options in line with libvirt's own output as
implemented in `src/conf/cpu_conf.c` and `src/conf/numa_conf.c`.
This includes support for the following options:
* numa.interconnects.latency[0-9]*.initiator
* numa.interconnects.latency[0-9]*.target
* numa.interconnects.latency[0-9]*.cache
* numa.interconnects.latency[0-9]*.type
* numa.interconnects.latency[0-9]*.value
* numa.interconnects.latency[0-9]*.unit
* The same suboptions for `numa.interconnects.bandwith[0-9]*`
Note that the cache= attribute is only explicitly defined for <latency>
nodes in the documentation. However, since <latency> and <bandwidth>
nodes are otherwise identical, the docs also don't explicitly forbid it
for <bandwidth> nodes, and libvirt happily accepts XML that does specify
it for for <bandwidth> nodes, this implements the cache= attribute for
<bandwidth> elements as well.
This includes support for the following options:
* numa.cell[0-9]*.cache[0-9]*.level
* numa.cell[0-9]*.cache[0-9]*.associativity
* numa.cell[0-9]*.cache[0-9]*.policy
* numa.cell[0-9]*.cache[0-9]*.size.value
* numa.cell[0-9]*.cache[0-9]*.size.unit
* numa.cell[0-9]*.cache[0-9]*.line.value
* numa.cell[0-9]*.cache[0-9]*.line.unit
This includes support for the following options:
* `emulatorsched.scheduler`
* `emulatorsched.priority`
* `iothreadsched.iothreads`
* `iothreadsched.scheduler`
* `iothreadsched.priority`
This includes support for the following options:
* `shares`
* `period`
* `quota`
* `global_period`
* `global_quota`
* `emulator_period`
* `emulator_quota`
* `iothread_period`
* `iothread_quota`
libvirt 7.2.0 introduced support for a list of firmware features
that should or should not be present. Libvirt takes these into
account when auto-selecting a firmware. Currently supported features
are `enrolled-keys` and `secure-boot`.
This adds support for evdev inputs which were introduced in 7.4.0,
as well as passthrough inputs and some other misc options to complete
the --input command.
New suboptions:
* source.evdev
* source.dev
* source.repeat
* source.grab
* source.grabToggle
* model
This includes support for the following suboptions:
* name (<shmem name=X>)
* role (<shmem role=X>)
* model.type (<shmem><model type=X/>)
* size (<shmem><size>X)
* size.unit (<shmem><size unit=X/>)
* server.path (<shmem><server path=X/>)
* msi.vectors (<shmem><msi vectors=X/>)
* msi.ioeventfd (<shmem><msi ioeventfd=X/>)
There are two domain XML knobs specific to NVDIMMs that
virt-install doesn't allow to set: <pmem/> and <alignsize/>.
Implement them.
Closes: https://github.com/virt-manager/virt-manager/issues/267
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As already done for a few architectures, let's add the default
graphics when using aarch64.
This has been tested on a NVIDIA Jetson Xavier NX SBC.
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
This has been reported for the libvirt qemu driver since v1.3.5,
released June 2016. But we need to keep some fallback logic for
the test driver, and to keep the testsuite happy
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Enable virt-manager GUI to support add, edit, remove, hot-plug and
hot-unplug of mediated devices (like DASDs, APQNs and PCIs) in virtual
server.
It is not possible to edit MDEV when a virtual server is in
running state, as this is not supported by libvirt.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Implement kvm.poll-control.state to `virt-install --feature`. It requires
libvirt >= v6.10.0.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
Implement "<transient shareBacking=yes/>" to virtinst to allow a transient disk
to be shared across VMs. It is introduced to libvirt since:
75871da0ec qemu: Allow <transient> disks with images shared accross
VMs
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
Since libvirt v6.9, the element <transient/> is to configure a disk
which discards its changes while VM was active. Support this element
by cmdline option `--disk ...,transient=on`.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
Support rotation_rate attrib which is introduced since libvirt v7.3.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Han Han <hhan@redhat.com>
xorisso is the still maintained isoinfo alternative, and may be
the only iso reading tool in RHEL9, so we need to support it.
Make it the default for our spec file and test suite too
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add support to install a virtual server with passed-through mediated
device. Mediated device can be created using vGPU attached to
vfio_pci driver or DASD attached to vfio_ccw driver or APQNs attached
to vfio_ap driver.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
This adds the following suboptions to configure <cputune>:
- vcpusched.vcpus
- vcpusched.scheduler
- vcpusched.priority
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Jonathan Schwender <schwenderjonathan@gmail.com>
Bhyve only supports nmdm console type, so use it instead of TYPE_PTY.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Bhyve requires explicit loader configuration. So query
domain capabilities, try to find the "official"
firmware and configure all the necessary loader options.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Choose SATA as a default bus for bhyve as it doesn't support IDE.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Various checks in the test suite try to match for error/status messages,
so using a localized libvirt (or even using translations of an installed
version of virt-manager in the system) makes those check fail.
Hence, force (using $LANG, and unsetting $LANGUAGE) an English UTF-8
locale.
Thanks Cole Robinson for spotting the right place where to inject the
locale settings.
Fixes: #199
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Make it work more like gfxdetails. The problem with the current
approach is that it requires effectively rebuilding the whole device
to match the original device when we want to edit a single field,
which is error prone.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This makes it more clear that 'path' is really a special designation
with a bunch of complicated logic behind it. It's also easier to
grep for
Signed-off-by: Cole Robinson <crobinso@redhat.com>
We do this by faking an install phase whenever cloudinit media is
specified, which isn't really the right abstraction and will leak
into virt-install behavior (like doing 2 boots), but it's the simplest
fix for now
Fixes: #178
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1883008
In the example above this is because the VM XML has an invalid machine
type, so domcaps fetching entirely fails, and a get_enum() call
then fails. But this could happen if using virt-manager against an
older libvirt that doesn't advertise the enum
Signed-off-by: Cole Robinson <crobinso@redhat.com>
delete and createvm tests launch a dialog which obstructs the
manager UI. The location can be kinda random, and it might obstruct
selecting the connection in the manager window. Go back to using
the drag() window pattern to make this more deterministic
Signed-off-by: Cole Robinson <crobinso@redhat.com>
And absord device building from addhardware. This moves all the
knowledge to gfxdetails, which saves sprinkling it around in other
places
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Close accelerator changes ctrl+w -> ctrl+shift+w
Quit accelerator changes ctrl+q -> ctrl+shift+q
After aafb874c8, if the mouse pointer isn't inside the console
window, it has keyboard focus but ctrl+w will be sent to the vmwindow
and not the VM. ctrl+w is a common shortcut for deleting a word so
this is pretty disruptive if you are typing inside the VM
Use gnome-terminal-esque accelerators starting with ctrl+shift to
reduce the chance of collision.
https://bugzilla.redhat.com/show_bug.cgi?id=1880295
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Historically we have not advertised host-passthrough because it was
not recommended for general usage. That stance is softening,
tools like gnome-boxes already set it as the default, and users
continue to ask about it.
We may change the default in virt-manager but it will take more
discussion. This is a tiny move in the direction of hiding it less
than we already do.
Drop the label for host-model and call it by its libvirt XML name,
since otherwise it's hard to tell which combo choice is for each
value
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Inspired by some discussion from here:
https://bugzilla.redhat.com/show_bug.cgi?id=1759454
Most libvirt storage volume creation doesn't actually do anything
with allocation, besides interpreting cap == alloc and cap != alloc.
The exceptions are zfs volumes, and raw file volumes. But it's unclear
what the usecase is for the latter at all.
This drops the allocation spinner and adds checkbox in its place
'Allocate entire volume now'. When enabled, it sets cap == alloc.
We only show this for file volumes. For qcow2 it defaults to unselected
(sparse), for all others it defaults to selected. If it's not showing,
it defaults to selected.
Bundled with this change is showing this field for qcow2, where
we previously only allowed nonsparse here. Libvirt and qemu-img
support non-sparse qcow2 these days.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1759454
See 15a6a7e210
The idea behind virt-manager's sparse vs nonsparse default, is that if
the user selected 'raw' for as the default image format, assume they
want to maximize performance, so fully allocate the disk.
qcow2 didn't support anything except sparse, so the sparse=True vs
sparse=False made no difference. So we always set sparse=False
Then qcow2 grows non-sparse support, and virt-manager is suddenly
defaulting to it, which is not the intention.
Default to sparse when requested format isn't raw
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is another preference that was added before anyone ever asked
for it. I'm fine with suggesting users remove the device manually
if they don't want it
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Remove the preference option to disable this. This was added with
the initial usbredir support because I was afraid people would
complain. They did complain, but only about the auto redir behavior
of the spice client. We still have a toggle to disable that behavior
If people don't want usbredir devices, I'm comfortable telling
them to remove them manually, or use virt-install
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* Convert to pytest style functions
* Move lots of shared code to our App class
* Reduce dogtail sleep amounts to speed up the whole testsuite
* Improve robustness in a lot of areas
Signed-off-by: Cole Robinson <crobinso@redhat.com>
For the few bits we are hitting specific code paths, break them
out or fold them into other test cases
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Make use of the new helper for showing a standard error message for two
conflicting cli options. This also catches one untranslatable message.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Instead of using the title of the dialog and prepending the connection
label, create a new title as a single string. This way it is possible to
translate this title as single sentence.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Latest libvirt uses socket activation, so libvirtd.service in
offline state does not indicate a problem necessarily.
Also on Fedora nowadays we have a weak RPM dependency on
libvirt-daemon which we didn't in the past.
Both things combine to make this code less useful and less accurate,
so let's remove most of it.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
virtManager/createvm.py:982:8: W0128: Redeclared variable 'ignore' in assignment (redeclared-assigned-name)
tests/uitests/lib/app.py:12:0: C0411: third party import "from gi.repository import Gio" should be placed before "import dogtail.rawinput" (wrong-import-order)
Signed-off-by: Chen Hanxiao <chenhx.fnst@cn.fujitsu.com>
If specified, this errors if no OS name was detected or manually set.
So --os-variant detect=on,require=on will error if no OS is detected.
name= can be used as a fallback, so test and document this case
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This adds the following --os-variant suboptions
* name=, short-id=
* id=
* detect=on|off
Functionally this does not change behavior, just adds explicit
sub options for behavior we already support
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The --os-variant option naming is pretty crappy and mostly a historical
artifact. Ideally this would be named just `--os` but I'm afraid that
would cause confusion with libvirt's <os> XML
Add --osinfo as an alternate commandline naming. If we ever want to
transition documented use of --os-variant it will help to have the
alternative around for a few releases
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The --xml option allows users to request raw XML edits to virt-install
or virt-xml generated XML. This gives users a bit of a workaround
incase we don't have proper support for some XML property. The --xml
option can gain more features in the future if it makes sense, like
setting XML namespaces for example.
Basic usage is like: virt-install --xml ./@foo=bar ...
Which will change the generated <domain> XML to have
<domain foo='bar' ...
virt-xml works similarly. It can only be combined with --edit currently.
This only works with xpaths rooted against the entire document.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Break utils.py apart into a whole uitests/lib/ directory with
* lib/_dogtailinit.py: all the dogtail library init we need
* lib/_node.py: extending our dogtail node class with more functions
* lib/app.py: VMMDogtailApp
* lib/util.py: util functions plus all the special helpers previously
in our custom TestCase
* lib/testcase.py: The TestCase that sets and tears down self.app
Adjust callers to match and make it easier to eventually convert to
native pytest usage
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This uncovered some areas in details.py we weren't handling that
the search view unselects the current selection
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Similar to behavior we have in virt-manager, if the user destroys the
VM during the VM install process, don't invoke the post install
reboot.
https://bugzilla.redhat.com/show_bug.cgi?id=1818089
Signed-off-by: Cole Robinson <crobinso@redhat.com>
As part of making virt-manager cooperate better with external viewers,
add an option to disable console autoconnect. When opening a VM window
for a running VM, you'll see a 'Connect to console' button in place
of the spice/vnc viewer. Click that and things proceed like normal.
This is useful to prevent virt-manager from disconnecting a virt-viewer
instance that's already attached to a VM
https://bugzilla.redhat.com/show_bug.cgi?id=1793876
Signed-off-by: Cole Robinson <crobinso@redhat.com>
When a VM window is launched for the first for a VM, currently we
set the top window size to 800x600 which is small and arbitrary and
is universally shrinks the viewer too much to fit any OS installer
I can find.
Instead do some hacks to resize the window to accomodate a viewer
widget of 1024x768 which seems to be what QXL graphics give us for
win10 and Fedora 32 installers. So for new VMs hitting the OS installer
we don't see scrollbars.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Right now this is tied to widget focus, which is too strong. This
changes it so that say clicking on the window title or toolbar then
allows the user to use Alt+F to trigger the File menu for example.
This roughly matches how virt-viewer works
https://bugzilla.redhat.com/show_bug.cgi?id=1824480
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* Move all the menu building to its own class, for clarity
* Rename the menu 'Consoles' since it contains graphical choice as well
* Strip out the VM console duplicate if it exists
* Simplify the code a bit
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* rename kernelupload.py to volumeupload.py and make the entrypoint
more generic
* move all upload invocation to the Installer class
* use it with cloudinit and unattended ISO generation if required
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is a quirk of libvirt that the first <device> is usually a
logical duplicate of the first <serial> device. Adjust virt-xml to
understand this quirk and remove both devices at the same time,
like we already do in virt-manager
https://bugzilla.redhat.com/show_bug.cgi?id=1685541
Signed-off-by: Cole Robinson <crobinso@redhat.com>
coreos is going to start using disk serial for ignition disk, so
setting this in the UI for distro testing will become more common
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Share the UI for changing all these disk properties:
- shareable
- readonly
- removable
- cache
- discard
- detect zeroes
Move them all under the 'Advanced options' expander in details, and
add the checkbox options to the addhardware wizard.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Allows the user to tweak the XML at the destination, which is already
something that libvirt supports
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* Drop the network editing, users can use the details window
* Drop the combo box approach in favor of a regular treeview
* Drop a lot validation checks which are redundant with modern
virtinst. We probably lose some checks but I don't think it's
too important
* Use the cloner API
* Add uitest coverage
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This let's us move more of the preserve logic to virtclone.py
and prep more things to share with virt-manager
Signed-off-by: Cole Robinson <crobinso@redhat.com>
test:///default saves changes for the lifetime of the connecting
process, which can cause weird interdependent issues in the test
suite. Duplicating it with driver XML will avoid those issues
popping up.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* Centralize lots of disk building
* Open code virt-clone specific behavior at the source
* Drop a lot or properties
* Move most testing to test_cli.py
* Generally a ton of cleanup
virt-manager clone wizard has not been converted yet so is totally
broken after this commit
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Cover more cases via the virt-clone CLI testing, than just the
test_cloner.py unit style testing.
Change most of the virt-clone --print-xml testing to also attempt the
clone operation as well via a hidden cli option, to ensure we aren't
testing XML of any bogus operations
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This is just a test suite hack from before we had other methods
of specifying cloneable guests. It will be removed soon
We need to tweak some test XML to fix code coverage after
Signed-off-by: Cole Robinson <crobinso@redhat.com>
As much as we can. There's not any current way to actually test
the full guestfs implementation, so we exclude it all
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Refactor the internals to cleanly separate the pieces that fill in
the UI, and the pieces that react to UI state to dynamically show/hide
fields.
Improve spice GL warnings while he are here, and several other minor
fixes
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Make it explicit that all uses of this is actually the object
name. We already leaked this abstraction in several places so better
to make it explicit. This also communicates to users that this is a
field that is not immutable so it shouldn't be used as a unique key
Signed-off-by: Cole Robinson <crobinso@redhat.com>
qxl doesn't add anything for the VNC case, and qxl is more likely
to be compiled out of qemu since it is dependent on spice, so vga
is the safer default for getting a working config
https://bugzilla.redhat.com/show_bug.cgi?id=1833704
Signed-off-by: Cole Robinson <crobinso@redhat.com>
- create a versioned directory for the current VERSION file, fixing the
typo in the distro name
- move the test to an own function
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
This code path was never hit because it came after caps.guest_lookup
which errors in this case. We need to check things earlier
Signed-off-by: Cole Robinson <crobinso@redhat.com>
In all modern local cases we will be using openFD to get a direct
file descriptor from the VM, so this code should never be triggered
nowadays
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Break it into disable-libguestfs, fake-systemd-success, and
firstrun-uri suboptions, and adjust using code to match
Signed-off-by: Cole Robinson <crobinso@redhat.com>
