This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
/*
2002-01-30 09:08:46 +03:00
Unix SMB / CIFS implementation .
2003-04-15 01:19:18 +04:00
Generic authentication types
2002-07-15 14:35:28 +04:00
Copyright ( C ) Andrew Bartlett 2001 - 2002
Copyright ( C ) Jelmer Vernooij 2002
2010-04-11 13:50:55 +04:00
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
This program is free software ; you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
2007-07-09 23:25:36 +04:00
the Free Software Foundation ; either version 3 of the License , or
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
( at your option ) any later version .
2010-04-11 13:50:55 +04:00
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
2010-04-11 13:50:55 +04:00
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
You should have received a copy of the GNU General Public License
2007-07-10 04:52:41 +04:00
along with this program . If not , see < http : //www.gnu.org/licenses/>.
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
*/
# include "includes.h"
2002-07-15 14:35:28 +04:00
# undef DBGC_CLASS
# define DBGC_CLASS DBGC_AUTH
2001-12-30 13:54:58 +03:00
/**
* Return a guest logon for guest users ( username = " " )
*
* Typically used as the first module in the auth chain , this allows
2002-07-15 14:35:28 +04:00
* guest logons to be dealt with in one place . Non - guest logons ' fail '
2001-12-30 13:54:58 +03:00
* and pass onto the next module .
* */
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
2002-01-05 07:55:41 +03:00
static NTSTATUS check_guest_security ( const struct auth_context * auth_context ,
void * my_private_data ,
2002-01-01 06:10:32 +03:00
TALLOC_CTX * mem_ctx ,
2010-01-10 16:16:04 +03:00
const struct auth_usersupplied_info * user_info ,
2010-01-10 16:24:22 +03:00
struct auth_serversupplied_info * * server_info )
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
{
2003-07-03 18:36:42 +04:00
/* mark this as 'not for me' */
NTSTATUS nt_status = NT_STATUS_NOT_IMPLEMENTED ;
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
2010-05-30 00:49:37 +04:00
DEBUG ( 10 , ( " Check auth for: [%s] \n " , user_info - > internal_username ) ) ;
2006-02-04 01:19:41 +03:00
if ( ! ( user_info - > internal_username
& & * user_info - > internal_username ) ) {
2008-05-06 19:26:49 +04:00
nt_status = make_server_info_guest ( NULL , server_info ) ;
2002-11-29 05:58:59 +03:00
}
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
return nt_status ;
}
2001-12-30 13:54:58 +03:00
/* Guest modules initialisation */
2002-12-12 02:54:40 +03:00
2003-04-24 15:56:09 +04:00
static NTSTATUS auth_init_guest ( struct auth_context * auth_context , const char * options , auth_methods * * auth_method )
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
{
2010-04-11 14:37:48 +04:00
struct auth_methods * result ;
result = TALLOC_ZERO_P ( auth_context , struct auth_methods ) ;
if ( result = = NULL ) {
2002-07-15 14:35:28 +04:00
return NT_STATUS_NO_MEMORY ;
2010-04-11 14:37:48 +04:00
}
result - > auth = check_guest_security ;
result - > name = " guest " ;
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
2010-04-11 14:37:48 +04:00
* auth_method = result ;
2002-07-15 14:35:28 +04:00
return NT_STATUS_OK ;
This is another rather major change to the samba authenticaion
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a9757739711dbb82035a4dfe6b40c99)
2001-11-24 15:12:38 +03:00
}
2003-04-24 15:56:09 +04:00
# ifdef DEVELOPER
2001-12-30 13:54:58 +03:00
/**
* Return an error based on username
*
* This function allows the testing of obsure errors , as well as the generation
* of NT_STATUS - > DOS error mapping tables .
*
* This module is of no value to end - users .
*
* The password is ignored .
*
* @ return An NTSTATUS value based on the username
* */
2001-11-25 06:01:14 +03:00
2002-01-05 07:55:41 +03:00
static NTSTATUS check_name_to_ntstatus_security ( const struct auth_context * auth_context ,
void * my_private_data ,
2002-01-01 06:10:32 +03:00
TALLOC_CTX * mem_ctx ,
2010-01-10 16:16:04 +03:00
const struct auth_usersupplied_info * user_info ,
2010-01-10 16:24:22 +03:00
struct auth_serversupplied_info * * server_info )
2001-11-25 06:01:14 +03:00
{
NTSTATUS nt_status ;
fstring user ;
long error_num ;
2010-05-30 00:49:37 +04:00
DEBUG ( 10 , ( " Check auth for: [%s] \n " , user_info - > internal_username ) ) ;
2010-06-01 14:27:03 +04:00
fstrcpy ( user , user_info - > client . account_name ) ;
2010-04-11 13:50:55 +04:00
2003-10-23 03:38:20 +04:00
if ( strnequal ( " NT_STATUS " , user , strlen ( " NT_STATUS " ) ) ) {
2003-07-03 23:11:31 +04:00
strupper_m ( user ) ;
2002-01-01 08:51:03 +03:00
return nt_status_string_to_code ( user ) ;
}
2003-07-03 23:11:31 +04:00
strlower_m ( user ) ;
2001-11-25 06:01:14 +03:00
error_num = strtoul ( user , NULL , 16 ) ;
2010-04-11 13:50:55 +04:00
2002-12-12 02:54:40 +03:00
DEBUG ( 5 , ( " check_name_to_ntstatus_security: Error for user %s was %lx \n " , user , error_num ) ) ;
2001-11-25 06:01:14 +03:00
nt_status = NT_STATUS ( error_num ) ;
2010-04-11 13:50:55 +04:00
2001-11-25 06:01:14 +03:00
return nt_status ;
}
2003-03-19 18:24:17 +03:00
/** Module initialisation function */
2002-12-12 02:54:40 +03:00
2003-04-24 15:56:09 +04:00
static NTSTATUS auth_init_name_to_ntstatus ( struct auth_context * auth_context , const char * param , auth_methods * * auth_method )
2001-11-25 06:01:14 +03:00
{
2010-04-11 14:37:48 +04:00
struct auth_methods * result ;
result = TALLOC_ZERO_P ( auth_context , struct auth_methods ) ;
if ( result = = NULL ) {
2002-07-15 14:35:28 +04:00
return NT_STATUS_NO_MEMORY ;
2010-04-11 14:37:48 +04:00
}
result - > auth = check_name_to_ntstatus_security ;
result - > name = " name_to_ntstatus " ;
2001-11-25 06:01:14 +03:00
2010-04-11 14:37:48 +04:00
* auth_method = result ;
2002-07-15 14:35:28 +04:00
return NT_STATUS_OK ;
}
/**
2003-03-19 18:24:17 +03:00
* Return a ' fixed ' challenge instead of a variable one .
2002-07-15 14:35:28 +04:00
*
* The idea of this function is to make packet snifs consistant
* with a fixed challenge , so as to aid debugging .
*
* This module is of no value to end - users .
*
* This module does not actually authenticate the user , but
* just pretenteds to need a specified challenge .
* This module removes * all * security from the challenge - response system
*
* @ return NT_STATUS_UNSUCCESSFUL
* */
static NTSTATUS check_fixed_challenge_security ( const struct auth_context * auth_context ,
void * my_private_data ,
TALLOC_CTX * mem_ctx ,
2010-01-10 16:16:04 +03:00
const struct auth_usersupplied_info * user_info ,
2010-01-10 16:24:22 +03:00
struct auth_serversupplied_info * * server_info )
2002-07-15 14:35:28 +04:00
{
2003-07-03 18:36:42 +04:00
return NT_STATUS_NOT_IMPLEMENTED ;
2002-07-15 14:35:28 +04:00
}
/****************************************************************************
Get the challenge out of a password server .
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
static DATA_BLOB auth_get_fixed_challenge ( const struct auth_context * auth_context ,
void * * my_private_data ,
TALLOC_CTX * mem_ctx )
{
const char * challenge = " I am a teapot " ;
return data_blob ( challenge , 8 ) ;
}
2010-04-11 14:24:07 +04:00
/** Module initialisation function */
2002-12-12 02:54:40 +03:00
2003-04-24 15:56:09 +04:00
static NTSTATUS auth_init_fixed_challenge ( struct auth_context * auth_context , const char * param , auth_methods * * auth_method )
2002-07-15 14:35:28 +04:00
{
2010-04-11 14:37:48 +04:00
struct auth_methods * result ;
result = TALLOC_ZERO_P ( auth_context , struct auth_methods ) ;
if ( result = = NULL ) {
2002-07-15 14:35:28 +04:00
return NT_STATUS_NO_MEMORY ;
2010-04-11 14:37:48 +04:00
}
result - > auth = check_fixed_challenge_security ;
result - > get_chal = auth_get_fixed_challenge ;
result - > name = " fixed_challenge " ;
2002-07-15 14:35:28 +04:00
2010-04-11 14:37:48 +04:00
* auth_method = result ;
2002-07-15 14:35:28 +04:00
return NT_STATUS_OK ;
}
2003-04-24 15:56:09 +04:00
# endif /* DEVELOPER */
2002-07-15 14:35:28 +04:00
2003-04-28 21:48:48 +04:00
NTSTATUS auth_builtin_init ( void )
2002-07-15 14:35:28 +04:00
{
2003-04-28 21:48:48 +04:00
smb_register_auth ( AUTH_INTERFACE_VERSION , " guest " , auth_init_guest ) ;
2003-04-16 16:13:07 +04:00
# ifdef DEVELOPER
2003-04-28 21:48:48 +04:00
smb_register_auth ( AUTH_INTERFACE_VERSION , " fixed_challenge " , auth_init_fixed_challenge ) ;
smb_register_auth ( AUTH_INTERFACE_VERSION , " name_to_ntstatus " , auth_init_name_to_ntstatus ) ;
2003-04-16 16:13:07 +04:00
# endif
2003-04-28 21:48:48 +04:00
return NT_STATUS_OK ;
2001-11-25 06:01:14 +03:00
}