1
0
mirror of https://github.com/samba-team/samba.git synced 2024-12-24 21:34:56 +03:00
samba-mirror/source4/rpc_server/dcerpc_server.c

1304 lines
35 KiB
C
Raw Normal View History

/*
Unix SMB/CIFS implementation.
server side dcerpc core code
Copyright (C) Andrew Tridgell 2003-2005
Copyright (C) Stefan (metze) Metzmacher 2004-2005
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "includes.h"
#include "librpc/gen_ndr/ndr_epmapper.h"
#include "librpc/gen_ndr/ndr_oxidresolver.h"
#include "auth/auth.h"
#include "dlinklist.h"
#include "rpc_server/dcerpc_server.h"
#include "lib/events/events.h"
r5102: This is a major simplification of the logic for controlling top level servers in smbd. The old code still contained a fairly bit of legacy from the time when smbd was only handling SMB connection. The new code gets rid of all of the smb_server specific code in smbd/, and creates a much simpler infrastructures for new server code. Major changes include: - simplified the process model code a lot. - got rid of the top level server and service structures completely. The top level context is now the event_context. This got rid of service.h and server.h completely (they were the most confusing parts of the old code) - added service_stream.[ch] for the helper functions that are specific to stream type services (services that handle streams, and use a logically separate process per connection) - got rid of the builtin idle_handler code in the service logic, as none of the servers were using it, and it can easily be handled by a server in future by adding its own timed_event to the event context. - fixed some major memory leaks in the rpc server code. - added registration of servers, rather than hard coding our list of possible servers. This allows for servers as modules in the future. - temporarily disabled the winbind code until I add the helper functions for that type of server - added error checking on service startup. If a configured server fails to startup then smbd doesn't startup. - cleaned up the command line handling in smbd, removing unused options (This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
2005-01-30 03:54:57 +03:00
#include "smbd/service_stream.h"
/*
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
see if two endpoints match
*/
static BOOL endpoints_match(const struct dcerpc_binding *ep1,
const struct dcerpc_binding *ep2)
{
if (ep1->transport != ep2->transport) {
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
return False;
}
if (!ep1->endpoint || !ep2->endpoint) {
return ep1->endpoint == ep2->endpoint;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
}
if (strcasecmp(ep1->endpoint, ep2->endpoint) != 0)
return False;
return True;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
}
/*
find an endpoint in the dcesrv_context
*/
static struct dcesrv_endpoint *find_endpoint(struct dcesrv_context *dce_ctx,
const struct dcerpc_binding *ep_description)
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
{
struct dcesrv_endpoint *ep;
for (ep=dce_ctx->endpoint_list; ep; ep=ep->next) {
r5902: A rather large change... I wanted to add a simple 'workstation' argument to the DCERPC authenticated binding calls, but this patch kind of grew from there. With SCHANNEL, the 'workstation' name (the netbios name of the client) matters, as this is what ties the session between the NETLOGON ops and the SCHANNEL bind. This changes a lot of files, and these will again be changed when jelmer does the credentials work. I also correct some schannel IDL to distinguish between workstation names and account names. The distinction matters for domain trust accounts. Issues in handling this (issues with lifetime of talloc pointers) caused me to change the 'creds_CredentialsState' and 'struct dcerpc_binding' pointers to always be talloc()ed pointers. In the schannel DB, we now store both the domain and computername, and query on both. This should ensure we fault correctly when the domain is specified incorrectly in the SCHANNEL bind. In the RPC-SCHANNEL test, I finally fixed a bug that vl pointed out, where the comment claimed we re-used a connection, but in fact we made a new connection. This was achived by breaking apart some of the dcerpc_secondary_connection() logic. The addition of workstation handling was also propogated to NTLMSSP and GENSEC, for completeness. The RPC-SAMSYNC test has been cleaned up a little, using a loop over usernames/passwords rather than manually expanded tests. This will be expanded further (the code in #if 0 in this patch) to use a newly created user account for testing. In making this test pass test_rpc.sh, I found a bug in the RPC-ECHO server, caused by the removal of [ref] and the assoicated pointer from the IDL. This has been re-added, until the underlying pidl issues are solved. (This used to be commit 824289dcc20908ddec957a4a892a103eec2da9b9)
2005-03-19 11:34:43 +03:00
if (endpoints_match(ep->ep_description, ep_description)) {
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
return ep;
}
}
return NULL;
}
/*
find a registered context_id from a bind or alter_context
*/
static struct dcesrv_connection_context *dcesrv_find_context(struct dcesrv_connection *conn,
uint32_t context_id)
{
struct dcesrv_connection_context *c;
for (c=conn->contexts;c;c=c->next) {
if (c->context_id == context_id) return c;
}
return NULL;
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/*
see if a uuid and if_version match to an interface
*/
static BOOL interface_match(const struct dcesrv_interface *if1,
const struct dcesrv_interface *if2)
{
if (if1->if_version != if2->if_version) {
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
return False;
}
if (strcmp(if1->uuid, if2->uuid)==0) {
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
return True;
}
return False;
}
/*
find the interface operations on an endpoint
*/
static const struct dcesrv_interface *find_interface(const struct dcesrv_endpoint *endpoint,
const struct dcesrv_interface *iface)
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
{
struct dcesrv_if_list *ifl;
for (ifl=endpoint->interface_list; ifl; ifl=ifl->next) {
if (interface_match(&(ifl->iface), iface)) {
return &(ifl->iface);
}
}
return NULL;
}
/*
see if a uuid and if_version match to an interface
*/
static BOOL interface_match_by_uuid(const struct dcesrv_interface *iface,
const char *uuid, uint32_t if_version)
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
{
if (iface->if_version != if_version) {
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
return False;
}
if (strcmp(iface->uuid, uuid)==0) {
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
return True;
}
return False;
}
/*
find the interface operations on an endpoint by uuid
*/
static const struct dcesrv_interface *find_interface_by_uuid(const struct dcesrv_endpoint *endpoint,
const char *uuid, uint32_t if_version)
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
{
struct dcesrv_if_list *ifl;
for (ifl=endpoint->interface_list; ifl; ifl=ifl->next) {
if (interface_match_by_uuid(&(ifl->iface), uuid, if_version)) {
return &(ifl->iface);
}
}
return NULL;
}
/*
find a call that is pending in our call list
*/
static struct dcesrv_call_state *dcesrv_find_call(struct dcesrv_connection *dce_conn, uint16_t call_id)
{
struct dcesrv_call_state *c;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
for (c=dce_conn->call_list;c;c=c->next) {
if (c->pkt.call_id == call_id) {
return c;
}
}
return NULL;
}
/*
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
register an interface on an endpoint
*/
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
NTSTATUS dcesrv_interface_register(struct dcesrv_context *dce_ctx,
const char *ep_name,
const struct dcesrv_interface *iface,
const struct security_descriptor *sd)
{
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
struct dcesrv_endpoint *ep;
struct dcesrv_if_list *ifl;
r5902: A rather large change... I wanted to add a simple 'workstation' argument to the DCERPC authenticated binding calls, but this patch kind of grew from there. With SCHANNEL, the 'workstation' name (the netbios name of the client) matters, as this is what ties the session between the NETLOGON ops and the SCHANNEL bind. This changes a lot of files, and these will again be changed when jelmer does the credentials work. I also correct some schannel IDL to distinguish between workstation names and account names. The distinction matters for domain trust accounts. Issues in handling this (issues with lifetime of talloc pointers) caused me to change the 'creds_CredentialsState' and 'struct dcerpc_binding' pointers to always be talloc()ed pointers. In the schannel DB, we now store both the domain and computername, and query on both. This should ensure we fault correctly when the domain is specified incorrectly in the SCHANNEL bind. In the RPC-SCHANNEL test, I finally fixed a bug that vl pointed out, where the comment claimed we re-used a connection, but in fact we made a new connection. This was achived by breaking apart some of the dcerpc_secondary_connection() logic. The addition of workstation handling was also propogated to NTLMSSP and GENSEC, for completeness. The RPC-SAMSYNC test has been cleaned up a little, using a loop over usernames/passwords rather than manually expanded tests. This will be expanded further (the code in #if 0 in this patch) to use a newly created user account for testing. In making this test pass test_rpc.sh, I found a bug in the RPC-ECHO server, caused by the removal of [ref] and the assoicated pointer from the IDL. This has been re-added, until the underlying pidl issues are solved. (This used to be commit 824289dcc20908ddec957a4a892a103eec2da9b9)
2005-03-19 11:34:43 +03:00
struct dcerpc_binding *binding;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
BOOL add_ep = False;
NTSTATUS status;
status = dcerpc_parse_binding(dce_ctx, ep_name, &binding);
if (NT_STATUS_IS_ERR(status)) {
DEBUG(0, ("Trouble parsing binding string '%s'\n", ep_name));
return status;
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* check if this endpoint exists
*/
r5902: A rather large change... I wanted to add a simple 'workstation' argument to the DCERPC authenticated binding calls, but this patch kind of grew from there. With SCHANNEL, the 'workstation' name (the netbios name of the client) matters, as this is what ties the session between the NETLOGON ops and the SCHANNEL bind. This changes a lot of files, and these will again be changed when jelmer does the credentials work. I also correct some schannel IDL to distinguish between workstation names and account names. The distinction matters for domain trust accounts. Issues in handling this (issues with lifetime of talloc pointers) caused me to change the 'creds_CredentialsState' and 'struct dcerpc_binding' pointers to always be talloc()ed pointers. In the schannel DB, we now store both the domain and computername, and query on both. This should ensure we fault correctly when the domain is specified incorrectly in the SCHANNEL bind. In the RPC-SCHANNEL test, I finally fixed a bug that vl pointed out, where the comment claimed we re-used a connection, but in fact we made a new connection. This was achived by breaking apart some of the dcerpc_secondary_connection() logic. The addition of workstation handling was also propogated to NTLMSSP and GENSEC, for completeness. The RPC-SAMSYNC test has been cleaned up a little, using a loop over usernames/passwords rather than manually expanded tests. This will be expanded further (the code in #if 0 in this patch) to use a newly created user account for testing. In making this test pass test_rpc.sh, I found a bug in the RPC-ECHO server, caused by the removal of [ref] and the assoicated pointer from the IDL. This has been re-added, until the underlying pidl issues are solved. (This used to be commit 824289dcc20908ddec957a4a892a103eec2da9b9)
2005-03-19 11:34:43 +03:00
if ((ep=find_endpoint(dce_ctx, binding))==NULL) {
ep = talloc(dce_ctx, struct dcesrv_endpoint);
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
if (!ep) {
return NT_STATUS_NO_MEMORY;
}
ZERO_STRUCTP(ep);
r5902: A rather large change... I wanted to add a simple 'workstation' argument to the DCERPC authenticated binding calls, but this patch kind of grew from there. With SCHANNEL, the 'workstation' name (the netbios name of the client) matters, as this is what ties the session between the NETLOGON ops and the SCHANNEL bind. This changes a lot of files, and these will again be changed when jelmer does the credentials work. I also correct some schannel IDL to distinguish between workstation names and account names. The distinction matters for domain trust accounts. Issues in handling this (issues with lifetime of talloc pointers) caused me to change the 'creds_CredentialsState' and 'struct dcerpc_binding' pointers to always be talloc()ed pointers. In the schannel DB, we now store both the domain and computername, and query on both. This should ensure we fault correctly when the domain is specified incorrectly in the SCHANNEL bind. In the RPC-SCHANNEL test, I finally fixed a bug that vl pointed out, where the comment claimed we re-used a connection, but in fact we made a new connection. This was achived by breaking apart some of the dcerpc_secondary_connection() logic. The addition of workstation handling was also propogated to NTLMSSP and GENSEC, for completeness. The RPC-SAMSYNC test has been cleaned up a little, using a loop over usernames/passwords rather than manually expanded tests. This will be expanded further (the code in #if 0 in this patch) to use a newly created user account for testing. In making this test pass test_rpc.sh, I found a bug in the RPC-ECHO server, caused by the removal of [ref] and the assoicated pointer from the IDL. This has been re-added, until the underlying pidl issues are solved. (This used to be commit 824289dcc20908ddec957a4a892a103eec2da9b9)
2005-03-19 11:34:43 +03:00
ep->ep_description = talloc_reference(ep, binding);
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
add_ep = True;
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* see if the interface is already registered on te endpoint */
if (find_interface(ep, iface)!=NULL) {
DEBUG(0,("dcesrv_interface_register: interface '%s' already registered on endpoint '%s'\n",
iface->name, ep_name));
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
return NT_STATUS_OBJECT_NAME_COLLISION;
}
/* talloc a new interface list element */
ifl = talloc(dce_ctx, struct dcesrv_if_list);
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
if (!ifl) {
return NT_STATUS_NO_MEMORY;
}
/* copy the given interface struct to the one on the endpoints interface list */
memcpy(&(ifl->iface),iface, sizeof(struct dcesrv_interface));
/* if we have a security descriptor given,
* we should see if we can set it up on the endpoint
*/
if (sd != NULL) {
/* if there's currently no security descriptor given on the endpoint
* we try to set it
*/
if (ep->sd == NULL) {
ep->sd = security_descriptor_copy(dce_ctx, sd);
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* if now there's no security descriptor given on the endpoint
* something goes wrong, either we failed to copy the security descriptor
* or there was already one on the endpoint
*/
if (ep->sd != NULL) {
DEBUG(0,("dcesrv_interface_register: interface '%s' failed to setup a security descriptor\n"
" on endpoint '%s'\n",
iface->name, ep_name));
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
if (add_ep) free(ep);
free(ifl);
return NT_STATUS_OBJECT_NAME_COLLISION;
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* finally add the interface on the endpoint */
DLIST_ADD(ep->interface_list, ifl);
/* if it's a new endpoint add it to the dcesrv_context */
if (add_ep) {
DLIST_ADD(dce_ctx->endpoint_list, ep);
}
DEBUG(4,("dcesrv_interface_register: interface '%s' registered on endpoint '%s'\n",
iface->name, ep_name));
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
return NT_STATUS_OK;
}
static NTSTATUS dcesrv_inherited_session_key(struct dcesrv_connection *p,
DATA_BLOB *session_key)
{
if (p->auth_state.session_info->session_key.length) {
*session_key = p->auth_state.session_info->session_key;
return NT_STATUS_OK;
}
return NT_STATUS_NO_USER_SESSION_KEY;
}
NTSTATUS dcesrv_generic_session_key(struct dcesrv_connection *p,
DATA_BLOB *session_key)
{
/* this took quite a few CPU cycles to find ... */
session_key->data = discard_const_p(uint8_t, "SystemLibraryDTC");
session_key->length = 16;
return NT_STATUS_OK;
}
/*
fetch the user session key - may be default (above) or the SMB session key
*/
NTSTATUS dcesrv_fetch_session_key(struct dcesrv_connection *p,
DATA_BLOB *session_key)
{
return p->auth_state.session_key(p, session_key);
}
/*
destroy a link to an endpoint
*/
static int dcesrv_endpoint_destructor(void *ptr)
{
struct dcesrv_connection *p = ptr;
while (p->contexts) {
struct dcesrv_connection_context *c = p->contexts;
DLIST_REMOVE(p->contexts, c);
if (c->iface) {
c->iface->unbind(c, c->iface);
}
}
return 0;
}
/*
connect to a dcerpc endpoint
*/
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
NTSTATUS dcesrv_endpoint_connect(struct dcesrv_context *dce_ctx,
TALLOC_CTX *mem_ctx,
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
const struct dcesrv_endpoint *ep,
r5102: This is a major simplification of the logic for controlling top level servers in smbd. The old code still contained a fairly bit of legacy from the time when smbd was only handling SMB connection. The new code gets rid of all of the smb_server specific code in smbd/, and creates a much simpler infrastructures for new server code. Major changes include: - simplified the process model code a lot. - got rid of the top level server and service structures completely. The top level context is now the event_context. This got rid of service.h and server.h completely (they were the most confusing parts of the old code) - added service_stream.[ch] for the helper functions that are specific to stream type services (services that handle streams, and use a logically separate process per connection) - got rid of the builtin idle_handler code in the service logic, as none of the servers were using it, and it can easily be handled by a server in future by adding its own timed_event to the event context. - fixed some major memory leaks in the rpc server code. - added registration of servers, rather than hard coding our list of possible servers. This allows for servers as modules in the future. - temporarily disabled the winbind code until I add the helper functions for that type of server - added error checking on service startup. If a configured server fails to startup then smbd doesn't startup. - cleaned up the command line handling in smbd, removing unused options (This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
2005-01-30 03:54:57 +03:00
struct stream_connection *srv_conn,
struct dcesrv_connection **_p)
{
struct dcesrv_connection *p;
p = talloc(mem_ctx, struct dcesrv_connection);
NT_STATUS_HAVE_NO_MEMORY(p);
p->dce_ctx = dce_ctx;
p->endpoint = ep;
p->contexts = NULL;
p->call_list = NULL;
p->pending_call_list = NULL;
p->cli_max_recv_frag = 0;
p->partial_input = data_blob(NULL, 0);
p->auth_state.auth_info = NULL;
p->auth_state.gensec_security = NULL;
p->auth_state.session_info = NULL;
p->auth_state.session_key = dcesrv_generic_session_key;
p->srv_conn = srv_conn;
p->processing = False;
talloc_set_destructor(p, dcesrv_endpoint_destructor);
*_p = p;
return NT_STATUS_OK;
}
/*
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
search and connect to a dcerpc endpoint
*/
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
NTSTATUS dcesrv_endpoint_search_connect(struct dcesrv_context *dce_ctx,
TALLOC_CTX *mem_ctx,
const struct dcerpc_binding *ep_description,
struct auth_session_info *session_info,
r5102: This is a major simplification of the logic for controlling top level servers in smbd. The old code still contained a fairly bit of legacy from the time when smbd was only handling SMB connection. The new code gets rid of all of the smb_server specific code in smbd/, and creates a much simpler infrastructures for new server code. Major changes include: - simplified the process model code a lot. - got rid of the top level server and service structures completely. The top level context is now the event_context. This got rid of service.h and server.h completely (they were the most confusing parts of the old code) - added service_stream.[ch] for the helper functions that are specific to stream type services (services that handle streams, and use a logically separate process per connection) - got rid of the builtin idle_handler code in the service logic, as none of the servers were using it, and it can easily be handled by a server in future by adding its own timed_event to the event context. - fixed some major memory leaks in the rpc server code. - added registration of servers, rather than hard coding our list of possible servers. This allows for servers as modules in the future. - temporarily disabled the winbind code until I add the helper functions for that type of server - added error checking on service startup. If a configured server fails to startup then smbd doesn't startup. - cleaned up the command line handling in smbd, removing unused options (This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
2005-01-30 03:54:57 +03:00
struct stream_connection *srv_conn,
struct dcesrv_connection **dce_conn_p)
{
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
NTSTATUS status;
const struct dcesrv_endpoint *ep;
/* make sure this endpoint exists */
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
ep = find_endpoint(dce_ctx, ep_description);
if (!ep) {
return NT_STATUS_OBJECT_NAME_NOT_FOUND;
}
status = dcesrv_endpoint_connect(dce_ctx, mem_ctx, ep, srv_conn, dce_conn_p);
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
if (!NT_STATUS_IS_OK(status)) {
return status;
}
(*dce_conn_p)->auth_state.session_info = talloc_reference((*dce_conn_p), session_info);
(*dce_conn_p)->auth_state.session_key = dcesrv_inherited_session_key;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* TODO: check security descriptor of the endpoint here
* if it's a smb named pipe
* if it's failed free dce_conn_p
*/
return NT_STATUS_OK;
}
static void dcesrv_init_hdr(struct ncacn_packet *pkt)
{
pkt->rpc_vers = 5;
pkt->rpc_vers_minor = 0;
if (lp_rpc_big_endian()) {
pkt->drep[0] = 0;
} else {
pkt->drep[0] = DCERPC_DREP_LE;
}
pkt->drep[1] = 0;
pkt->drep[2] = 0;
pkt->drep[3] = 0;
}
/*
return a dcerpc fault
*/
static NTSTATUS dcesrv_fault(struct dcesrv_call_state *call, uint32_t fault_code)
{
struct ncacn_packet pkt;
struct dcesrv_call_reply *rep;
NTSTATUS status;
/* setup a bind_ack */
dcesrv_init_hdr(&pkt);
pkt.auth_length = 0;
pkt.call_id = call->pkt.call_id;
pkt.ptype = DCERPC_PKT_FAULT;
pkt.pfc_flags = DCERPC_PFC_FLAG_FIRST | DCERPC_PFC_FLAG_LAST;
pkt.u.fault.alloc_hint = 0;
pkt.u.fault.context_id = 0;
pkt.u.fault.cancel_count = 0;
pkt.u.fault.status = fault_code;
rep = talloc(call, struct dcesrv_call_reply);
NT_STATUS_HAVE_NO_MEMORY(rep);
rep->data = talloc(call, DATA_BLOB);
NT_STATUS_HAVE_NO_MEMORY(rep->data);
status = ncacn_push_auth(rep->data, call, &pkt, NULL);
NT_STATUS_NOT_OK_RETURN(status);
dcerpc_set_frag_length(rep->data, rep->data->length);
DLIST_ADD_END(call->replies, rep, struct dcesrv_call_reply *);
r464: a big improvement to the API for writing server-side RPC servers. Previously the server pipe code needed to return the RPC level status (nearly always "OK") and separately set the function call return using r->out.result. All the programmers writing servers (metze, jelmer and me) were often getting this wrong, by doing things like "return NT_STATUS_NO_MEMORY" which was really quite meaningless as there is no code like that at the dcerpc level. I have now modified pidl to generate the necessary boilerplate so that just returning the status you want from the function will work. So for a NTSTATUS function you return NT_STATUS_XXX and from a WERROR function you return WERR_XXX. If you really want to generate a DCERPC level fault rather than just a return value in your function then you should use the DCESRV_FAULT() macro which will correctly generate a fault for you. As a side effect, this also adds automatic type checking of all of our server side rpc functions, which was impossible with the old API. When I changed the API I found and fixed quite a few functions with the wrong type information, so this is definately useful. I have also changed the server side template generation to generate a DCERPC "operation range error" by default when you have not yet filled in a server side function. This allows us to correctly implement functions in any order in our rpc pipe servers and give the client the right information about the fault. (This used to be commit a4df5c7cf88891a78d82c8d6d7f058d8485e73f0)
2004-05-04 10:07:52 +04:00
DLIST_ADD_END(call->conn->call_list, call, struct dcesrv_call_state *);
return NT_STATUS_OK;
}
/*
return a dcerpc bind_nak
*/
static NTSTATUS dcesrv_bind_nak(struct dcesrv_call_state *call, uint32_t reason)
{
struct ncacn_packet pkt;
struct dcesrv_call_reply *rep;
NTSTATUS status;
/* setup a bind_nak */
dcesrv_init_hdr(&pkt);
pkt.auth_length = 0;
pkt.call_id = call->pkt.call_id;
pkt.ptype = DCERPC_PKT_BIND_NAK;
pkt.pfc_flags = DCERPC_PFC_FLAG_FIRST | DCERPC_PFC_FLAG_LAST;
pkt.u.bind_nak.reject_reason = reason;
pkt.u.bind_nak.num_versions = 0;
rep = talloc(call, struct dcesrv_call_reply);
NT_STATUS_HAVE_NO_MEMORY(rep);
rep->data = talloc(call, DATA_BLOB);
NT_STATUS_HAVE_NO_MEMORY(rep->data);
status = ncacn_push_auth(rep->data, call, &pkt, NULL);
NT_STATUS_NOT_OK_RETURN(status);
dcerpc_set_frag_length(rep->data, rep->data->length);
DLIST_ADD_END(call->replies, rep, struct dcesrv_call_reply *);
DLIST_ADD_END(call->conn->call_list, call, struct dcesrv_call_state *);
return NT_STATUS_OK;
}
/*
handle a bind request
*/
static NTSTATUS dcesrv_bind(struct dcesrv_call_state *call)
{
const char *uuid, *transfer_syntax;
uint32_t if_version, transfer_syntax_version;
struct ncacn_packet pkt;
struct dcesrv_call_reply *rep;
NTSTATUS status;
uint32_t result=0, reason=0;
uint32_t context_id;
const struct dcesrv_interface *iface;
if (call->pkt.u.bind.num_contexts < 1 ||
call->pkt.u.bind.ctx_list[0].num_transfer_syntaxes < 1) {
return dcesrv_bind_nak(call, 0);
}
context_id = call->pkt.u.bind.ctx_list[0].context_id;
/* you can't bind twice on one context */
if (dcesrv_find_context(call->conn, context_id) != NULL) {
return dcesrv_bind_nak(call, 0);
}
if_version = call->pkt.u.bind.ctx_list[0].abstract_syntax.if_version;
uuid = GUID_string(call, &call->pkt.u.bind.ctx_list[0].abstract_syntax.uuid);
if (!uuid) {
return dcesrv_bind_nak(call, 0);
}
transfer_syntax_version = call->pkt.u.bind.ctx_list[0].transfer_syntaxes[0].if_version;
transfer_syntax = GUID_string(call,
&call->pkt.u.bind.ctx_list[0].transfer_syntaxes[0].uuid);
if (!transfer_syntax ||
strcasecmp(NDR_GUID, transfer_syntax) != 0 ||
NDR_GUID_VERSION != transfer_syntax_version) {
/* we only do NDR encoded dcerpc */
DEBUG(0,("Non NDR transfer syntax requested - %s\n", transfer_syntax));
return dcesrv_bind_nak(call, 0);
}
iface = find_interface_by_uuid(call->conn->endpoint, uuid, if_version);
if (iface == NULL) {
DEBUG(2,("Request for unknown dcerpc interface %s/%d\n", uuid, if_version));
/* we don't know about that interface */
result = DCERPC_BIND_PROVIDER_REJECT;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
reason = DCERPC_BIND_REASON_ASYNTAX;
}
if (iface) {
/* add this context to the list of available context_ids */
struct dcesrv_connection_context *context = talloc(call->conn,
struct dcesrv_connection_context);
if (context == NULL) {
return dcesrv_bind_nak(call, 0);
}
context->conn = call->conn;
context->iface = iface;
context->context_id = context_id;
context->private = NULL;
context->handles = NULL;
DLIST_ADD(call->conn->contexts, context);
call->context = context;
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
if (call->conn->cli_max_recv_frag == 0) {
call->conn->cli_max_recv_frag = call->pkt.u.bind.max_recv_frag;
}
/* handle any authentication that is being requested */
if (!dcesrv_auth_bind(call)) {
/* TODO: work out the right reject code */
return dcesrv_bind_nak(call, 0);
}
/* setup a bind_ack */
dcesrv_init_hdr(&pkt);
pkt.auth_length = 0;
pkt.call_id = call->pkt.call_id;
pkt.ptype = DCERPC_PKT_BIND_ACK;
pkt.pfc_flags = DCERPC_PFC_FLAG_FIRST | DCERPC_PFC_FLAG_LAST;
pkt.u.bind_ack.max_xmit_frag = 0x2000;
pkt.u.bind_ack.max_recv_frag = 0x2000;
pkt.u.bind_ack.assoc_group_id = call->pkt.u.bind.assoc_group_id;
if (iface) {
/* FIXME: Use pipe name as specified by endpoint instead of interface name */
pkt.u.bind_ack.secondary_address = talloc_asprintf(call, "\\PIPE\\%s", iface->name);
} else {
pkt.u.bind_ack.secondary_address = "";
}
pkt.u.bind_ack.num_results = 1;
pkt.u.bind_ack.ctx_list = talloc(call, struct dcerpc_ack_ctx);
if (!pkt.u.bind_ack.ctx_list) {
return NT_STATUS_NO_MEMORY;
}
pkt.u.bind_ack.ctx_list[0].result = result;
pkt.u.bind_ack.ctx_list[0].reason = reason;
GUID_from_string(NDR_GUID, &pkt.u.bind_ack.ctx_list[0].syntax.uuid);
pkt.u.bind_ack.ctx_list[0].syntax.if_version = NDR_GUID_VERSION;
pkt.u.bind_ack.auth_info = data_blob(NULL, 0);
if (!dcesrv_auth_bind_ack(call, &pkt)) {
return dcesrv_bind_nak(call, 0);
}
if (iface) {
status = iface->bind(call, iface);
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
if (!NT_STATUS_IS_OK(status)) {
DEBUG(2,("Request for dcerpc interface %s/%d rejected: %s\n",
uuid, if_version, nt_errstr(status)));
return dcesrv_bind_nak(call, 0);
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
}
}
rep = talloc(call, struct dcesrv_call_reply);
NT_STATUS_HAVE_NO_MEMORY(rep);
rep->data = talloc(call, DATA_BLOB);
NT_STATUS_HAVE_NO_MEMORY(rep->data);
status = ncacn_push_auth(rep->data, call, &pkt,
call->conn->auth_state.auth_info);
NT_STATUS_NOT_OK_RETURN(status);
dcerpc_set_frag_length(rep->data, rep->data->length);
DLIST_ADD_END(call->replies, rep, struct dcesrv_call_reply *);
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
DLIST_ADD_END(call->conn->call_list, call, struct dcesrv_call_state *);
return NT_STATUS_OK;
}
/*
handle a auth3 request
*/
static NTSTATUS dcesrv_auth3(struct dcesrv_call_state *call)
{
/* handle the auth3 in the auth code */
if (!dcesrv_auth_auth3(call)) {
return dcesrv_fault(call, DCERPC_FAULT_OTHER);
}
talloc_free(call);
/* we don't send a reply to a auth3 request, except by a
fault */
return NT_STATUS_OK;
}
/*
handle a bind request
*/
static NTSTATUS dcesrv_alter_new_context(struct dcesrv_call_state *call, uint32_t context_id)
{
uint32_t if_version, transfer_syntax_version;
const char *uuid, *transfer_syntax;
struct dcesrv_connection_context *context;
const struct dcesrv_interface *iface;
if_version = call->pkt.u.alter.ctx_list[0].abstract_syntax.if_version;
uuid = GUID_string(call, &call->pkt.u.alter.ctx_list[0].abstract_syntax.uuid);
if (!uuid) {
return NT_STATUS_NO_MEMORY;
}
transfer_syntax_version = call->pkt.u.alter.ctx_list[0].transfer_syntaxes[0].if_version;
transfer_syntax = GUID_string(call,
&call->pkt.u.alter.ctx_list[0].transfer_syntaxes[0].uuid);
if (!transfer_syntax ||
strcasecmp(NDR_GUID, transfer_syntax) != 0 ||
NDR_GUID_VERSION != transfer_syntax_version) {
/* we only do NDR encoded dcerpc */
return NT_STATUS_NO_MEMORY;
}
iface = find_interface_by_uuid(call->conn->endpoint, uuid, if_version);
if (iface == NULL) {
DEBUG(2,("Request for unknown dcerpc interface %s/%d\n", uuid, if_version));
return NT_STATUS_RPC_PROTSEQ_NOT_SUPPORTED;
}
/* add this context to the list of available context_ids */
context = talloc(call->conn, struct dcesrv_connection_context);
if (context == NULL) {
return NT_STATUS_NO_MEMORY;
}
context->conn = call->conn;
context->iface = iface;
context->context_id = context_id;
context->private = NULL;
context->handles = NULL;
DLIST_ADD(call->conn->contexts, context);
call->context = context;
return NT_STATUS_OK;
}
/*
handle a bind request
*/
static NTSTATUS dcesrv_alter(struct dcesrv_call_state *call)
{
struct ncacn_packet pkt;
struct dcesrv_call_reply *rep;
NTSTATUS status;
uint32_t result=0, reason=0;
uint32_t context_id;
/* handle any authentication that is being requested */
if (!dcesrv_auth_alter(call)) {
/* TODO: work out the right reject code */
result = DCERPC_BIND_PROVIDER_REJECT;
reason = DCERPC_BIND_REASON_ASYNTAX;
}
context_id = call->pkt.u.alter.ctx_list[0].context_id;
/* see if they are asking for a new interface */
if (result == 0 &&
dcesrv_find_context(call->conn, context_id) == NULL) {
status = dcesrv_alter_new_context(call, context_id);
if (!NT_STATUS_IS_OK(status)) {
result = DCERPC_BIND_PROVIDER_REJECT;
reason = DCERPC_BIND_REASON_ASYNTAX;
}
}
/* setup a alter_resp */
dcesrv_init_hdr(&pkt);
pkt.auth_length = 0;
pkt.call_id = call->pkt.call_id;
pkt.ptype = DCERPC_PKT_ALTER_RESP;
pkt.pfc_flags = DCERPC_PFC_FLAG_FIRST | DCERPC_PFC_FLAG_LAST;
pkt.u.alter_resp.max_xmit_frag = 0x2000;
pkt.u.alter_resp.max_recv_frag = 0x2000;
pkt.u.alter_resp.assoc_group_id = call->pkt.u.alter.assoc_group_id;
pkt.u.alter_resp.num_results = 1;
pkt.u.alter_resp.ctx_list = talloc_array(call, struct dcerpc_ack_ctx, 1);
if (!pkt.u.alter_resp.ctx_list) {
return NT_STATUS_NO_MEMORY;
}
pkt.u.alter_resp.ctx_list[0].result = result;
pkt.u.alter_resp.ctx_list[0].reason = reason;
GUID_from_string(NDR_GUID, &pkt.u.alter_resp.ctx_list[0].syntax.uuid);
pkt.u.alter_resp.ctx_list[0].syntax.if_version = NDR_GUID_VERSION;
pkt.u.alter_resp.auth_info = data_blob(NULL, 0);
pkt.u.alter_resp.secondary_address = "";
if (!dcesrv_auth_alter_ack(call, &pkt)) {
return dcesrv_bind_nak(call, 0);
}
rep = talloc(call, struct dcesrv_call_reply);
NT_STATUS_HAVE_NO_MEMORY(rep);
rep->data = talloc(call, DATA_BLOB);
NT_STATUS_HAVE_NO_MEMORY(rep->data);
status = ncacn_push_auth(rep->data, call, &pkt,
call->conn->auth_state.auth_info);
NT_STATUS_IS_OK_RETURN(status);
dcerpc_set_frag_length(rep->data, rep->data->length);
DLIST_ADD_END(call->replies, rep, struct dcesrv_call_reply *);
DLIST_ADD_END(call->conn->call_list, call, struct dcesrv_call_state *);
return NT_STATUS_OK;
}
/*
handle a dcerpc request packet
*/
static NTSTATUS dcesrv_request(struct dcesrv_call_state *call)
{
struct ndr_pull *pull;
NTSTATUS status;
struct dcesrv_connection_context *context;
call->fault_code = 0;
call->state_flags = call->conn->dce_ctx->state_flags;
call->time = timeval_current();
/* if authenticated, and the mech we use can't do async replies, don't use them... */
if (call->conn->auth_state.gensec_security &&
!gensec_have_feature(call->conn->auth_state.gensec_security, GENSEC_FEATURE_ASYNC_REPLIES)) {
call->state_flags &= ~DCESRV_CALL_STATE_FLAG_MAY_ASYNC;
}
context = dcesrv_find_context(call->conn, call->pkt.u.request.context_id);
if (context == NULL) {
return dcesrv_fault(call, DCERPC_FAULT_UNK_IF);
}
pull = ndr_pull_init_blob(&call->pkt.u.request.stub_and_verifier, call);
NT_STATUS_HAVE_NO_MEMORY(pull);
pull->flags |= LIBNDR_FLAG_REF_ALLOC;
call->context = context;
call->event_ctx = context->conn->srv_conn->event.ctx;
call->ndr_pull = pull;
if (call->pkt.pfc_flags & DCERPC_PFC_FLAG_ORPC) {
pull->flags |= LIBNDR_FLAG_OBJECT_PRESENT;
}
if (!(call->pkt.drep[0] & DCERPC_DREP_LE)) {
pull->flags |= LIBNDR_FLAG_BIGENDIAN;
}
/* unravel the NDR for the packet */
status = context->iface->ndr_pull(call, call, pull, &call->r);
if (!NT_STATUS_IS_OK(status)) {
return dcesrv_fault(call, call->fault_code);
}
if (pull->offset != pull->data_size) {
DEBUG(3,("Warning: %d extra bytes in incoming RPC request\n",
pull->data_size - pull->offset));
dump_data(10, pull->data+pull->offset, pull->data_size - pull->offset);
}
/* call the dispatch function */
status = context->iface->dispatch(call, call, call->r);
if (!NT_STATUS_IS_OK(status)) {
return dcesrv_fault(call, call->fault_code);
}
/* add the call to the pending list */
DLIST_ADD_END(call->conn->pending_call_list, call, struct dcesrv_call_state *);
if (call->state_flags & DCESRV_CALL_STATE_FLAG_ASYNC) {
return NT_STATUS_OK;
}
return dcesrv_reply(call);
}
NTSTATUS dcesrv_reply(struct dcesrv_call_state *call)
{
struct ndr_push *push;
NTSTATUS status;
DATA_BLOB stub;
uint32_t total_length;
struct dcesrv_connection_context *context = call->context;
/* call the reply function */
status = context->iface->reply(call, call, call->r);
if (!NT_STATUS_IS_OK(status)) {
r464: a big improvement to the API for writing server-side RPC servers. Previously the server pipe code needed to return the RPC level status (nearly always "OK") and separately set the function call return using r->out.result. All the programmers writing servers (metze, jelmer and me) were often getting this wrong, by doing things like "return NT_STATUS_NO_MEMORY" which was really quite meaningless as there is no code like that at the dcerpc level. I have now modified pidl to generate the necessary boilerplate so that just returning the status you want from the function will work. So for a NTSTATUS function you return NT_STATUS_XXX and from a WERROR function you return WERR_XXX. If you really want to generate a DCERPC level fault rather than just a return value in your function then you should use the DCESRV_FAULT() macro which will correctly generate a fault for you. As a side effect, this also adds automatic type checking of all of our server side rpc functions, which was impossible with the old API. When I changed the API I found and fixed quite a few functions with the wrong type information, so this is definately useful. I have also changed the server side template generation to generate a DCERPC "operation range error" by default when you have not yet filled in a server side function. This allows us to correctly implement functions in any order in our rpc pipe servers and give the client the right information about the fault. (This used to be commit a4df5c7cf88891a78d82c8d6d7f058d8485e73f0)
2004-05-04 10:07:52 +04:00
return dcesrv_fault(call, call->fault_code);
}
/* form the reply NDR */
push = ndr_push_init_ctx(call);
NT_STATUS_HAVE_NO_MEMORY(push);
/* carry over the pointer count to the reply in case we are
using full pointer. See NDR specification for full
pointers */
push->ptr_count = call->ndr_pull->ptr_count;
if (lp_rpc_big_endian()) {
push->flags |= LIBNDR_FLAG_BIGENDIAN;
}
status = context->iface->ndr_push(call, call, push, call->r);
if (!NT_STATUS_IS_OK(status)) {
return dcesrv_fault(call, call->fault_code);
}
stub = ndr_push_blob(push);
total_length = stub.length;
do {
uint32_t length;
struct dcesrv_call_reply *rep;
struct ncacn_packet pkt;
rep = talloc(call, struct dcesrv_call_reply);
NT_STATUS_HAVE_NO_MEMORY(rep);
rep->data = talloc(call, DATA_BLOB);
NT_STATUS_HAVE_NO_MEMORY(rep->data);
length = stub.length;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
if (length + DCERPC_RESPONSE_LENGTH > call->conn->cli_max_recv_frag) {
/* the 32 is to cope with signing data */
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
length = call->conn->cli_max_recv_frag -
(DCERPC_MAX_SIGN_SIZE+DCERPC_RESPONSE_LENGTH);
}
/* form the dcerpc response packet */
dcesrv_init_hdr(&pkt);
pkt.auth_length = 0;
pkt.call_id = call->pkt.call_id;
pkt.ptype = DCERPC_PKT_RESPONSE;
pkt.pfc_flags = 0;
if (stub.length == total_length) {
pkt.pfc_flags |= DCERPC_PFC_FLAG_FIRST;
}
if (length == stub.length) {
pkt.pfc_flags |= DCERPC_PFC_FLAG_LAST;
}
pkt.u.response.alloc_hint = stub.length;
pkt.u.response.context_id = call->pkt.u.request.context_id;
pkt.u.response.cancel_count = 0;
pkt.u.response.stub_and_verifier.data = stub.data;
pkt.u.response.stub_and_verifier.length = length;
if (!dcesrv_auth_response(call, rep->data, &pkt)) {
return dcesrv_fault(call, DCERPC_FAULT_OTHER);
}
dcerpc_set_frag_length(rep->data, rep->data->length);
DLIST_ADD_END(call->replies, rep, struct dcesrv_call_reply *);
stub.data += length;
stub.length -= length;
} while (stub.length != 0);
/* move the call from the pending to the finished calls list */
DLIST_REMOVE(call->conn->pending_call_list, call);
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
DLIST_ADD_END(call->conn->call_list, call, struct dcesrv_call_state *);
if (call->conn->call_list && call->conn->call_list->replies) {
if (call->conn->srv_conn &&
call->conn->srv_conn->event.fde) {
EVENT_FD_WRITEABLE(call->conn->srv_conn->event.fde);
}
}
return NT_STATUS_OK;
}
/*
work out if we have a full packet yet
*/
static BOOL dce_full_packet(const DATA_BLOB *data)
{
if (data->length < DCERPC_FRAG_LEN_OFFSET+2) {
return False;
}
if (dcerpc_get_frag_length(data) > data->length) {
return False;
}
return True;
}
/*
we might have consumed only part of our input - advance past that part
*/
static void dce_partial_advance(struct dcesrv_connection *dce_conn, uint32_t offset)
{
DATA_BLOB blob;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
if (dce_conn->partial_input.length == offset) {
data_blob_free(&dce_conn->partial_input);
return;
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
blob = dce_conn->partial_input;
dce_conn->partial_input = data_blob(blob.data + offset,
blob.length - offset);
data_blob_free(&blob);
}
/*
process some input to a dcerpc endpoint server.
*/
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
NTSTATUS dcesrv_input_process(struct dcesrv_connection *dce_conn)
{
struct ndr_pull *ndr;
NTSTATUS status;
struct dcesrv_call_state *call;
DATA_BLOB blob;
call = talloc(dce_conn, struct dcesrv_call_state);
if (!call) {
talloc_free(dce_conn->partial_input.data);
return NT_STATUS_NO_MEMORY;
}
call->conn = dce_conn;
call->replies = NULL;
call->context = NULL;
call->event_ctx = dce_conn->srv_conn->event.ctx;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
blob = dce_conn->partial_input;
blob.length = dcerpc_get_frag_length(&blob);
ndr = ndr_pull_init_blob(&blob, call);
if (!ndr) {
talloc_free(dce_conn->partial_input.data);
talloc_free(call);
return NT_STATUS_NO_MEMORY;
}
if (!(CVAL(blob.data, DCERPC_DREP_OFFSET) & DCERPC_DREP_LE)) {
ndr->flags |= LIBNDR_FLAG_BIGENDIAN;
}
status = ndr_pull_ncacn_packet(ndr, NDR_SCALARS|NDR_BUFFERS, &call->pkt);
if (!NT_STATUS_IS_OK(status)) {
talloc_free(dce_conn->partial_input.data);
talloc_free(call);
return status;
}
/* we have to check the signing here, before combining the
pdus */
if (call->pkt.ptype == DCERPC_PKT_REQUEST &&
!dcesrv_auth_request(call, &blob)) {
dce_partial_advance(dce_conn, blob.length);
return dcesrv_fault(call, DCERPC_FAULT_ACCESS_DENIED);
}
dce_partial_advance(dce_conn, blob.length);
/* see if this is a continued packet */
if (call->pkt.ptype == DCERPC_PKT_REQUEST &&
!(call->pkt.pfc_flags & DCERPC_PFC_FLAG_FIRST)) {
struct dcesrv_call_state *call2 = call;
uint32_t alloc_size;
/* we only allow fragmented requests, no other packet types */
if (call->pkt.ptype != DCERPC_PKT_REQUEST) {
return dcesrv_fault(call2, DCERPC_FAULT_OTHER);
}
/* this is a continuation of an existing call - find the call then
tack it on the end */
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
call = dcesrv_find_call(dce_conn, call2->pkt.call_id);
if (!call) {
return dcesrv_fault(call2, DCERPC_FAULT_OTHER);
}
if (call->pkt.ptype != call2->pkt.ptype) {
/* trying to play silly buggers are we? */
return dcesrv_fault(call2, DCERPC_FAULT_OTHER);
}
alloc_size = call->pkt.u.request.stub_and_verifier.length +
call2->pkt.u.request.stub_and_verifier.length;
if (call->pkt.u.request.alloc_hint > alloc_size) {
alloc_size = call->pkt.u.request.alloc_hint;
}
call->pkt.u.request.stub_and_verifier.data =
talloc_realloc(call,
call->pkt.u.request.stub_and_verifier.data,
uint8_t, alloc_size);
if (!call->pkt.u.request.stub_and_verifier.data) {
return dcesrv_fault(call2, DCERPC_FAULT_OTHER);
}
memcpy(call->pkt.u.request.stub_and_verifier.data +
call->pkt.u.request.stub_and_verifier.length,
call2->pkt.u.request.stub_and_verifier.data,
call2->pkt.u.request.stub_and_verifier.length);
call->pkt.u.request.stub_and_verifier.length +=
call2->pkt.u.request.stub_and_verifier.length;
call->pkt.pfc_flags |= (call2->pkt.pfc_flags & DCERPC_PFC_FLAG_LAST);
talloc_free(call2);
}
/* this may not be the last pdu in the chain - if its isn't then
just put it on the call_list and wait for the rest */
if (call->pkt.ptype == DCERPC_PKT_REQUEST &&
!(call->pkt.pfc_flags & DCERPC_PFC_FLAG_LAST)) {
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
DLIST_ADD_END(dce_conn->call_list, call, struct dcesrv_call_state *);
return NT_STATUS_OK;
}
switch (call->pkt.ptype) {
case DCERPC_PKT_BIND:
status = dcesrv_bind(call);
break;
case DCERPC_PKT_AUTH3:
status = dcesrv_auth3(call);
break;
case DCERPC_PKT_ALTER:
status = dcesrv_alter(call);
break;
case DCERPC_PKT_REQUEST:
status = dcesrv_request(call);
break;
default:
status = NT_STATUS_INVALID_PARAMETER;
break;
}
/* if we are going to be sending a reply then add
it to the list of pending calls. We add it to the end to keep the call
list in the order we will answer */
if (!NT_STATUS_IS_OK(status)) {
talloc_free(call);
}
return status;
}
/*
provide some input to a dcerpc endpoint server. This passes data
from a dcerpc client into the server
*/
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
NTSTATUS dcesrv_input(struct dcesrv_connection *dce_conn, const DATA_BLOB *data)
{
NTSTATUS status;
dce_conn->partial_input.data = talloc_realloc(dce_conn,
dce_conn->partial_input.data,
uint8_t,
dce_conn->partial_input.length + data->length);
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
if (!dce_conn->partial_input.data) {
return NT_STATUS_NO_MEMORY;
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
memcpy(dce_conn->partial_input.data + dce_conn->partial_input.length,
data->data, data->length);
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
dce_conn->partial_input.length += data->length;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
while (dce_full_packet(&dce_conn->partial_input)) {
status = dcesrv_input_process(dce_conn);
if (!NT_STATUS_IS_OK(status)) {
return status;
}
}
return NT_STATUS_OK;
}
/*
retrieve some output from a dcerpc server
The caller supplies a function that will be called to do the
actual output.
The first argument to write_fn() will be 'private', the second will
be a pointer to a buffer containing the data to be sent and the 3rd
will be a pointer to a size_t variable that will be set to the
number of bytes that are consumed from the output.
from the current fragment
*/
NTSTATUS dcesrv_output(struct dcesrv_connection *dce_conn,
void *private_data,
NTSTATUS (*write_fn)(void *private_data, DATA_BLOB *output, size_t *nwritten))
{
NTSTATUS status;
struct dcesrv_call_state *call;
struct dcesrv_call_reply *rep;
size_t nwritten;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
call = dce_conn->call_list;
if (!call || !call->replies) {
if (dce_conn->pending_call_list) {
/* TODO: we need to say act async here
* as we know we have pending requests
* which will be finished at a time
*/
return NT_STATUS_FOOBAR;
}
return NT_STATUS_FOOBAR;
}
rep = call->replies;
status = write_fn(private_data, rep->data, &nwritten);
NT_STATUS_IS_ERR_RETURN(status);
rep->data->length -= nwritten;
rep->data->data += nwritten;
if (rep->data->length == 0) {
/* we're done with this section of the call */
DLIST_REMOVE(call->replies, rep);
}
if (call->replies == NULL) {
/* we're done with the whole call */
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
DLIST_REMOVE(dce_conn->call_list, call);
talloc_free(call);
}
return status;
}
static NTSTATUS dcesrv_init_context(TALLOC_CTX *mem_ctx, const char **endpoint_servers, uint32_t state_flags, struct dcesrv_context **_dce_ctx)
{
NTSTATUS status;
struct dcesrv_context *dce_ctx;
int i;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
if (!endpoint_servers) {
DEBUG(0,("dcesrv_init_context: no endpoint servers configured\n"));
return NT_STATUS_INTERNAL_ERROR;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
}
dce_ctx = talloc(mem_ctx, struct dcesrv_context);
NT_STATUS_HAVE_NO_MEMORY(dce_ctx);
dce_ctx->endpoint_list = NULL;
dce_ctx->state_flags = state_flags;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
for (i=0;endpoint_servers[i];i++) {
const struct dcesrv_endpoint_server *ep_server;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
ep_server = dcesrv_ep_server_byname(endpoint_servers[i]);
if (!ep_server) {
DEBUG(0,("dcesrv_init_context: failed to find endpoint server = '%s'\n", endpoint_servers[i]));
return NT_STATUS_INTERNAL_ERROR;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
}
status = ep_server->init_server(dce_ctx, ep_server);
if (!NT_STATUS_IS_OK(status)) {
DEBUG(0,("dcesrv_init_context: failed to init endpoint server = '%s': %s\n", endpoint_servers[i],
nt_errstr(status)));
return status;
}
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
*_dce_ctx = dce_ctx;
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
return NT_STATUS_OK;
}
/*
r5102: This is a major simplification of the logic for controlling top level servers in smbd. The old code still contained a fairly bit of legacy from the time when smbd was only handling SMB connection. The new code gets rid of all of the smb_server specific code in smbd/, and creates a much simpler infrastructures for new server code. Major changes include: - simplified the process model code a lot. - got rid of the top level server and service structures completely. The top level context is now the event_context. This got rid of service.h and server.h completely (they were the most confusing parts of the old code) - added service_stream.[ch] for the helper functions that are specific to stream type services (services that handle streams, and use a logically separate process per connection) - got rid of the builtin idle_handler code in the service logic, as none of the servers were using it, and it can easily be handled by a server in future by adding its own timed_event to the event context. - fixed some major memory leaks in the rpc server code. - added registration of servers, rather than hard coding our list of possible servers. This allows for servers as modules in the future. - temporarily disabled the winbind code until I add the helper functions for that type of server - added error checking on service startup. If a configured server fails to startup then smbd doesn't startup. - cleaned up the command line handling in smbd, removing unused options (This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
2005-01-30 03:54:57 +03:00
initialise the dcerpc server context for ncacn_np based services
*/
NTSTATUS dcesrv_init_ipc_context(TALLOC_CTX *mem_ctx, struct dcesrv_context **_dce_ctx)
{
NTSTATUS status;
struct dcesrv_context *dce_ctx;
status = dcesrv_init_context(mem_ctx, lp_dcerpc_endpoint_servers(), 0, &dce_ctx);
NT_STATUS_NOT_OK_RETURN(status);
*_dce_ctx = dce_ctx;
return NT_STATUS_OK;
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* the list of currently registered DCERPC endpoint servers.
*/
static struct ep_server {
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
struct dcesrv_endpoint_server *ep_server;
} *ep_servers = NULL;
static int num_ep_servers;
/*
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
register a DCERPC endpoint server.
The 'name' can be later used by other backends to find the operations
structure for this backend.
The 'type' is used to specify whether this is for a disk, printer or IPC$ share
*/
NTSTATUS dcerpc_register_ep_server(const void *_ep_server)
{
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
const struct dcesrv_endpoint_server *ep_server = _ep_server;
if (dcesrv_ep_server_byname(ep_server->name) != NULL) {
/* its already registered! */
DEBUG(0,("DCERPC endpoint server '%s' already registered\n",
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
ep_server->name));
return NT_STATUS_OBJECT_NAME_COLLISION;
}
ep_servers = realloc_p(ep_servers, struct ep_server, num_ep_servers+1);
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
if (!ep_servers) {
smb_panic("out of memory in dcerpc_register");
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
}
ep_servers[num_ep_servers].ep_server = smb_xmemdup(ep_server, sizeof(*ep_server));
ep_servers[num_ep_servers].ep_server->name = smb_xstrdup(ep_server->name);
num_ep_servers++;
DEBUG(3,("DCERPC endpoint server '%s' registered\n",
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
ep_server->name));
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
return NT_STATUS_OK;
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/*
return the operations structure for a named backend of the specified type
*/
const struct dcesrv_endpoint_server *dcesrv_ep_server_byname(const char *name)
{
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
int i;
for (i=0;i<num_ep_servers;i++) {
if (strcmp(ep_servers[i].ep_server->name, name) == 0) {
return ep_servers[i].ep_server;
}
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
return NULL;
}
This patch adds a better dcerpc server infastructure. 1.) We now register endpoint servers add startup via register_backend() and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context 2.) each endpoint server can register at context creation time as much interfaces as it wants (multiple interfaces on one endpoint are supported!) (NOTE: there's a difference between 'endpoint server' and 'endpoint'! for details look at rpc_server/dcesrv_server.h) 3.) one endpoint can have a security descriptor registered to it self this will be checked in the future when a client wants to connect to an smb pipe endpoint. 4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module it takes this options in the [globals] section: dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper dcerpc remote:binding = ... dcerpc remote:user = ... dcerpc remote:password = ... 5.) we currently have tree endpoint servers: epmapper, rpcecho and remote the default for the 'dcerpc endpiont servers = epmapper, rpcecho' for testing you can also do dcerpc endpoint servers = rpcecho, remote, epmapper dcerpc remote:interfaces = srvsvc, samr, netlogon 6,) please notice the the epmapper now only returns NO_ENTRIES (but I think we'll find a solution for this too:-) 7.) also there're some other stuff left, but step by step :-) This patch also includes updates for the register_subsystem() , ntvfs_init(), and some other funtions to check for duplicate subsystem registration metze (hmmm, my first large commit...I hope it works as supposed :-) (This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/*
return the DCERPC module version, and the size of some critical types
This can be used by endpoint server modules to either detect compilation errors, or provide
multiple implementations for different smbd compilation options in one module
*/
const struct dcesrv_critical_sizes *dcerpc_module_version(void)
{
static const struct dcesrv_critical_sizes critical_sizes = {
DCERPC_MODULE_VERSION,
sizeof(struct dcesrv_context),
sizeof(struct dcesrv_endpoint),
sizeof(struct dcesrv_endpoint_server),
sizeof(struct dcesrv_interface),
sizeof(struct dcesrv_if_list),
sizeof(struct dcesrv_connection),
sizeof(struct dcesrv_call_state),
sizeof(struct dcesrv_auth),
sizeof(struct dcesrv_handle)
};
return &critical_sizes;
}
r5102: This is a major simplification of the logic for controlling top level servers in smbd. The old code still contained a fairly bit of legacy from the time when smbd was only handling SMB connection. The new code gets rid of all of the smb_server specific code in smbd/, and creates a much simpler infrastructures for new server code. Major changes include: - simplified the process model code a lot. - got rid of the top level server and service structures completely. The top level context is now the event_context. This got rid of service.h and server.h completely (they were the most confusing parts of the old code) - added service_stream.[ch] for the helper functions that are specific to stream type services (services that handle streams, and use a logically separate process per connection) - got rid of the builtin idle_handler code in the service logic, as none of the servers were using it, and it can easily be handled by a server in future by adding its own timed_event to the event context. - fixed some major memory leaks in the rpc server code. - added registration of servers, rather than hard coding our list of possible servers. This allows for servers as modules in the future. - temporarily disabled the winbind code until I add the helper functions for that type of server - added error checking on service startup. If a configured server fails to startup then smbd doesn't startup. - cleaned up the command line handling in smbd, removing unused options (This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
2005-01-30 03:54:57 +03:00
/*
initialise the dcerpc server context for socket based services
*/
static NTSTATUS dcesrv_init(struct event_context *event_context, const struct model_ops *model_ops)
{
r5102: This is a major simplification of the logic for controlling top level servers in smbd. The old code still contained a fairly bit of legacy from the time when smbd was only handling SMB connection. The new code gets rid of all of the smb_server specific code in smbd/, and creates a much simpler infrastructures for new server code. Major changes include: - simplified the process model code a lot. - got rid of the top level server and service structures completely. The top level context is now the event_context. This got rid of service.h and server.h completely (they were the most confusing parts of the old code) - added service_stream.[ch] for the helper functions that are specific to stream type services (services that handle streams, and use a logically separate process per connection) - got rid of the builtin idle_handler code in the service logic, as none of the servers were using it, and it can easily be handled by a server in future by adding its own timed_event to the event context. - fixed some major memory leaks in the rpc server code. - added registration of servers, rather than hard coding our list of possible servers. This allows for servers as modules in the future. - temporarily disabled the winbind code until I add the helper functions for that type of server - added error checking on service startup. If a configured server fails to startup then smbd doesn't startup. - cleaned up the command line handling in smbd, removing unused options (This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
2005-01-30 03:54:57 +03:00
NTSTATUS status;
struct dcesrv_context *dce_ctx;
r5102: This is a major simplification of the logic for controlling top level servers in smbd. The old code still contained a fairly bit of legacy from the time when smbd was only handling SMB connection. The new code gets rid of all of the smb_server specific code in smbd/, and creates a much simpler infrastructures for new server code. Major changes include: - simplified the process model code a lot. - got rid of the top level server and service structures completely. The top level context is now the event_context. This got rid of service.h and server.h completely (they were the most confusing parts of the old code) - added service_stream.[ch] for the helper functions that are specific to stream type services (services that handle streams, and use a logically separate process per connection) - got rid of the builtin idle_handler code in the service logic, as none of the servers were using it, and it can easily be handled by a server in future by adding its own timed_event to the event context. - fixed some major memory leaks in the rpc server code. - added registration of servers, rather than hard coding our list of possible servers. This allows for servers as modules in the future. - temporarily disabled the winbind code until I add the helper functions for that type of server - added error checking on service startup. If a configured server fails to startup then smbd doesn't startup. - cleaned up the command line handling in smbd, removing unused options (This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
2005-01-30 03:54:57 +03:00
status = dcesrv_init_context(event_context,
lp_dcerpc_endpoint_servers(),
DCESRV_CALL_STATE_FLAG_MAY_ASYNC,
&dce_ctx);
NT_STATUS_NOT_OK_RETURN(status);
r5102: This is a major simplification of the logic for controlling top level servers in smbd. The old code still contained a fairly bit of legacy from the time when smbd was only handling SMB connection. The new code gets rid of all of the smb_server specific code in smbd/, and creates a much simpler infrastructures for new server code. Major changes include: - simplified the process model code a lot. - got rid of the top level server and service structures completely. The top level context is now the event_context. This got rid of service.h and server.h completely (they were the most confusing parts of the old code) - added service_stream.[ch] for the helper functions that are specific to stream type services (services that handle streams, and use a logically separate process per connection) - got rid of the builtin idle_handler code in the service logic, as none of the servers were using it, and it can easily be handled by a server in future by adding its own timed_event to the event context. - fixed some major memory leaks in the rpc server code. - added registration of servers, rather than hard coding our list of possible servers. This allows for servers as modules in the future. - temporarily disabled the winbind code until I add the helper functions for that type of server - added error checking on service startup. If a configured server fails to startup then smbd doesn't startup. - cleaned up the command line handling in smbd, removing unused options (This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
2005-01-30 03:54:57 +03:00
return dcesrv_sock_init(dce_ctx, event_context, model_ops);
}
r5102: This is a major simplification of the logic for controlling top level servers in smbd. The old code still contained a fairly bit of legacy from the time when smbd was only handling SMB connection. The new code gets rid of all of the smb_server specific code in smbd/, and creates a much simpler infrastructures for new server code. Major changes include: - simplified the process model code a lot. - got rid of the top level server and service structures completely. The top level context is now the event_context. This got rid of service.h and server.h completely (they were the most confusing parts of the old code) - added service_stream.[ch] for the helper functions that are specific to stream type services (services that handle streams, and use a logically separate process per connection) - got rid of the builtin idle_handler code in the service logic, as none of the servers were using it, and it can easily be handled by a server in future by adding its own timed_event to the event context. - fixed some major memory leaks in the rpc server code. - added registration of servers, rather than hard coding our list of possible servers. This allows for servers as modules in the future. - temporarily disabled the winbind code until I add the helper functions for that type of server - added error checking on service startup. If a configured server fails to startup then smbd doesn't startup. - cleaned up the command line handling in smbd, removing unused options (This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
2005-01-30 03:54:57 +03:00
NTSTATUS server_service_rpc_init(void)
{
r5102: This is a major simplification of the logic for controlling top level servers in smbd. The old code still contained a fairly bit of legacy from the time when smbd was only handling SMB connection. The new code gets rid of all of the smb_server specific code in smbd/, and creates a much simpler infrastructures for new server code. Major changes include: - simplified the process model code a lot. - got rid of the top level server and service structures completely. The top level context is now the event_context. This got rid of service.h and server.h completely (they were the most confusing parts of the old code) - added service_stream.[ch] for the helper functions that are specific to stream type services (services that handle streams, and use a logically separate process per connection) - got rid of the builtin idle_handler code in the service logic, as none of the servers were using it, and it can easily be handled by a server in future by adding its own timed_event to the event context. - fixed some major memory leaks in the rpc server code. - added registration of servers, rather than hard coding our list of possible servers. This allows for servers as modules in the future. - temporarily disabled the winbind code until I add the helper functions for that type of server - added error checking on service startup. If a configured server fails to startup then smbd doesn't startup. - cleaned up the command line handling in smbd, removing unused options (This used to be commit cf6a46c3cbde7b1eb1b86bd3882b953a2de3a42e)
2005-01-30 03:54:57 +03:00
return register_server_service("rpc", dcesrv_init);
}