/*
Unix SMB / CIFS implementation .
passdb structures and parameters
Copyright ( C ) Gerald Carter 2001
Copyright ( C ) Luke Kenneth Casson Leighton 1998 - 2000
Copyright ( C ) Andrew Bartlett 2002
Copyright ( C ) Simo Sorce 2003
This program is free software ; you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation ; either version 2 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program ; if not , write to the Free Software
Foundation , Inc . , 675 Mass Ave , Cambridge , MA 0213 9 , USA .
*/
# ifndef _PASSDB_H
# define _PASSDB_H
/*
* bit flags representing initialized fields in SAM_ACCOUNT
*/
enum pdb_elements {
PDB_UNINIT ,
PDB_SMBHOME ,
PDB_PROFILE ,
PDB_DRIVE ,
PDB_LOGONSCRIPT ,
PDB_LOGONTIME ,
PDB_LOGOFFTIME ,
PDB_KICKOFFTIME ,
PDB_CANCHANGETIME ,
PDB_MUSTCHANGETIME ,
PDB_PLAINTEXT_PW ,
PDB_USERNAME ,
PDB_FULLNAME ,
PDB_DOMAIN ,
PDB_NTUSERNAME ,
PDB_HOURSLEN ,
PDB_LOGONDIVS ,
PDB_USERSID ,
PDB_GROUPSID ,
PDB_ACCTCTRL ,
PDB_PASSLASTSET ,
PDB_UNIXHOMEDIR ,
PDB_ACCTDESC ,
PDB_WORKSTATIONS ,
PDB_UNKNOWNSTR ,
PDB_MUNGEDDIAL ,
PDB_HOURS ,
PDB_UNKNOWN3 ,
PDB_UNKNOWN5 ,
PDB_UNKNOWN6 ,
PDB_LMPASSWD ,
PDB_NTPASSWD ,
/* this must be the last element */
PDB_COUNT
} ;
enum pdb_group_elements {
PDB_GROUP_NAME ,
PDB_GROUP_SID ,
PDB_GROUP_SID_NAME_USE ,
PDB_GROUP_MEMBERS ,
/* this must be the last element */
PDB_GROUP_COUNT
} ;
enum pdb_value_state {
PDB_DEFAULT = 0 ,
PDB_SET ,
PDB_CHANGED
} ;
# define IS_SAM_SET(x, flag) (pdb_get_init_flags(x, flag) == PDB_SET)
# define IS_SAM_CHANGED(x, flag) (pdb_get_init_flags(x, flag) == PDB_CHANGED)
# define IS_SAM_DEFAULT(x, flag) (pdb_get_init_flags(x, flag) == PDB_DEFAULT)
typedef struct sam_passwd
{
TALLOC_CTX * mem_ctx ;
void ( * free_fn ) ( struct sam_passwd * * ) ;
struct pdb_methods * methods ;
struct user_data {
/* initiailization flags */
struct bitmap * change_flags ;
struct bitmap * set_flags ;
time_t logon_time ; /* logon time */
time_t logoff_time ; /* logoff time */
time_t kickoff_time ; /* kickoff time */
time_t pass_last_set_time ; /* password last set time */
time_t pass_can_change_time ; /* password can change time */
time_t pass_must_change_time ; /* password must change time */
const char * username ; /* UNIX username string */
const char * domain ; /* Windows Domain name */
const char * nt_username ; /* Windows username string */
const char * full_name ; /* user's full name string */
const char * unix_home_dir ; /* UNIX home directory string */
const char * home_dir ; /* home directory string */
const char * dir_drive ; /* home directory drive string */
const char * logon_script ; /* logon script string */
const char * profile_path ; /* profile path string */
const char * acct_desc ; /* user description string */
const char * workstations ; /* login from workstations string */
const char * unknown_str ; /* don't know what this is, yet. */
const char * munged_dial ; /* munged path name and dial-back tel number */
DOM_SID user_sid ; /* Primary User SID */
DOM_SID group_sid ; /* Primary Group SID */
DATA_BLOB lm_pw ; /* .data is Null if no password */
DATA_BLOB nt_pw ; /* .data is Null if no password */
char * plaintext_pw ; /* is Null if not available */
uint16 acct_ctrl ; /* account info (ACB_xxxx bit-mask) */
uint32 unknown_3 ; /* 0x00ff ffff */
uint16 logon_divs ; /* 168 - number of hours in a week */
uint32 hours_len ; /* normally 21 bytes */
uint8 hours [ MAX_HOURS_LEN ] ;
uint32 unknown_5 ; /* 0x0002 0000 */
uint32 unknown_6 ; /* 0x0000 04ec */
} private ;
/* Lets see if the remaining code can get the hint that you
are meant to use the pdb_ . . . ( ) functions . */
} SAM_ACCOUNT ;
typedef struct sam_group {
TALLOC_CTX * mem_ctx ;
void ( * free_fn ) ( struct sam_group * * ) ;
struct pdb_methods * methods ;
struct group_data {
/* initiailization flags */
struct bitmap * change_flags ;
struct bitmap * set_flags ;
const char * name ; /* Windows group name string */
DOM_SID sid ; /* Group SID */
enum SID_NAME_USE sid_name_use ; /* Group type */
uint32 mem_num ; /* Number of member SIDs */
DOM_SID * members ; /* SID array */
} private ;
} SAM_GROUP ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
/*****************************************************************
Functions to be implemented by the new ( v2 ) passdb API
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*
* This next constant specifies the version number of the PASSDB interface
* this SAMBA will load . Increment this if * ANY * changes are made to the interface .
*/
# define PASSDB_INTERFACE_VERSION 4
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
typedef struct pdb_context
{
struct pdb_methods * pdb_methods ;
struct pdb_methods * pwent_methods ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
/* These functions are wrappers for the functions listed above.
They may do extra things like re - reading a SAM_ACCOUNT on update */
NTSTATUS ( * pdb_setsampwent ) ( struct pdb_context * , BOOL update ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
void ( * pdb_endsampwent ) ( struct pdb_context * ) ;
NTSTATUS ( * pdb_getsampwent ) ( struct pdb_context * , SAM_ACCOUNT * user ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * pdb_getsampwnam ) ( struct pdb_context * , SAM_ACCOUNT * sam_acct , const char * username ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * pdb_getsampwsid ) ( struct pdb_context * , SAM_ACCOUNT * sam_acct , const DOM_SID * sid ) ;
NTSTATUS ( * pdb_add_sam_account ) ( struct pdb_context * , SAM_ACCOUNT * sampass ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * pdb_update_sam_account ) ( struct pdb_context * , SAM_ACCOUNT * sampass ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * pdb_delete_sam_account ) ( struct pdb_context * , SAM_ACCOUNT * username ) ;
NTSTATUS ( * pdb_getgrsid ) ( struct pdb_context * context , GROUP_MAP * map ,
DOM_SID sid , BOOL with_priv ) ;
NTSTATUS ( * pdb_getgrgid ) ( struct pdb_context * context , GROUP_MAP * map ,
gid_t gid , BOOL with_priv ) ;
NTSTATUS ( * pdb_getgrnam ) ( struct pdb_context * context , GROUP_MAP * map ,
char * name , BOOL with_priv ) ;
NTSTATUS ( * pdb_add_group_mapping_entry ) ( struct pdb_context * context ,
GROUP_MAP * map ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * pdb_update_group_mapping_entry ) ( struct pdb_context * context ,
GROUP_MAP * map ) ;
NTSTATUS ( * pdb_delete_group_mapping_entry ) ( struct pdb_context * context ,
DOM_SID sid ) ;
NTSTATUS ( * pdb_enum_group_mapping ) ( struct pdb_context * context ,
enum SID_NAME_USE sid_name_use ,
GROUP_MAP * * rmap , int * num_entries ,
BOOL unix_only , BOOL with_priv ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
void ( * free_fn ) ( struct pdb_context * * ) ;
TALLOC_CTX * mem_ctx ;
} PDB_CONTEXT ;
typedef struct pdb_methods
{
const char * name ; /* What name got this module */
struct pdb_context * parent ;
/* Use macros from dlinklist.h on these two */
struct pdb_methods * next ;
struct pdb_methods * prev ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * setsampwent ) ( struct pdb_methods * , BOOL update ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
void ( * endsampwent ) ( struct pdb_methods * ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * getsampwent ) ( struct pdb_methods * , SAM_ACCOUNT * user ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * getsampwnam ) ( struct pdb_methods * , SAM_ACCOUNT * sam_acct , const char * username ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * getsampwsid ) ( struct pdb_methods * , SAM_ACCOUNT * sam_acct , const DOM_SID * sid ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * add_sam_account ) ( struct pdb_methods * , SAM_ACCOUNT * sampass ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * update_sam_account ) ( struct pdb_methods * , SAM_ACCOUNT * sampass ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * delete_sam_account ) ( struct pdb_methods * , SAM_ACCOUNT * username ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
NTSTATUS ( * getgrsid ) ( struct pdb_methods * methods , GROUP_MAP * map ,
DOM_SID sid , BOOL with_priv ) ;
NTSTATUS ( * getgrgid ) ( struct pdb_methods * methods , GROUP_MAP * map ,
gid_t gid , BOOL with_priv ) ;
NTSTATUS ( * getgrnam ) ( struct pdb_methods * methods , GROUP_MAP * map ,
char * name , BOOL with_priv ) ;
NTSTATUS ( * add_group_mapping_entry ) ( struct pdb_methods * methods ,
GROUP_MAP * map ) ;
NTSTATUS ( * update_group_mapping_entry ) ( struct pdb_methods * methods ,
GROUP_MAP * map ) ;
NTSTATUS ( * delete_group_mapping_entry ) ( struct pdb_methods * methods ,
DOM_SID sid ) ;
NTSTATUS ( * enum_group_mapping ) ( struct pdb_methods * methods ,
enum SID_NAME_USE sid_name_use ,
GROUP_MAP * * rmap , int * num_entries ,
BOOL unix_only , BOOL with_priv ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
void * private_data ; /* Private data of some kind */
void ( * free_private_data ) ( void * * ) ;
} PDB_METHODS ;
typedef NTSTATUS ( * pdb_init_function ) ( struct pdb_context * ,
struct pdb_methods * * ,
const char * ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
struct pdb_init_function_entry {
const char * name ;
/* Function to create a member of the pdb_methods list */
pdb_init_function init ;
struct pdb_init_function_entry * prev , * next ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
-
} ;
# endif /* _PASSDB_H */
