samba-mirror/source3/smbd/nttrans.c

#define OLD_NTDOMAIN 1
/*
   Unix SMB/Netbios implementation.
   Version 1.9.
   SMB NT transaction handling
   Copyright (C) Jeremy Allison 1994-1998

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

#include "includes.h"

extern int DEBUGLEVEL;
extern int Protocol;
extern int smb_read_error;
extern int global_oplock_break;
extern BOOL case_sensitive;
extern BOOL case_preserve;
extern BOOL short_case_preserve;

static char *known_nt_pipes[] = {
  "\\LANMAN",
  "\\srvsvc",
  "\\samr",
  "\\wkssvc",
  "\\NETLOGON",
  "\\ntlsa",
  "\\ntsvcs",
  "\\lsass",
  "\\lsarpc",
  "\\winreg",
  "\\spoolss",
#ifdef WITH_MSDFS
  "\\netdfs",
#endif
  NULL
};

/****************************************************************************
 Send the required number of replies back.
 We assume all fields other than the data fields are
 set correctly for the type of call.
 HACK ! Always assumes smb_setup field is zero.
****************************************************************************/

static int send_nt_replies(char *inbuf, char *outbuf, int bufsize, uint32 nt_error, char *params,
                           int paramsize, char *pdata, int datasize)
{
  extern int max_send;
  int data_to_send = datasize;
  int params_to_send = paramsize;
  int useable_space;
  char *pp = params;
  char *pd = pdata;
  int params_sent_thistime, data_sent_thistime, total_sent_thistime;
  int alignment_offset = 3;
  int data_alignment_offset = 0;

  /*
   * Initially set the wcnt area to be 18 - this is true for all
   * transNT replies.
   */

  set_message(outbuf,18,0,True);

  if(nt_error != 0) {
    /* NT Error. */
    SSVAL(outbuf,smb_flg2, SVAL(outbuf,smb_flg2) | FLAGS2_32_BIT_ERROR_CODES);

    ERROR(0,nt_error);
  }

  /* 
   * If there genuinely are no parameters or data to send just send
   * the empty packet.
   */

  if(params_to_send == 0 && data_to_send == 0) {
    send_smb(smbd_server_fd(),outbuf);
    return 0;
  }

  /*
   * When sending params and data ensure that both are nicely aligned.
   * Only do this alignment when there is also data to send - else
   * can cause NT redirector problems.
   */

  if (((params_to_send % 4) != 0) && (data_to_send != 0))
    data_alignment_offset = 4 - (params_to_send % 4);

  /* 
   * Space is bufsize minus Netbios over TCP header minus SMB header.
   * The alignment_offset is to align the param bytes on a four byte
   * boundary (2 bytes for data len, one byte pad). 
   * NT needs this to work correctly.
   */

  useable_space = bufsize - ((smb_buf(outbuf)+
                    alignment_offset+data_alignment_offset) -
                    outbuf);

  /*
   * useable_space can never be more than max_send minus the
   * alignment offset.
   */

  useable_space = MIN(useable_space,
                      max_send - (alignment_offset+data_alignment_offset));


  while (params_to_send || data_to_send) {

    /*
     * Calculate whether we will totally or partially fill this packet.
     */

    total_sent_thistime = params_to_send + data_to_send +
                            alignment_offset + data_alignment_offset;

    /* 
     * We can never send more than useable_space.
     */

    total_sent_thistime = MIN(total_sent_thistime, useable_space);

    set_message(outbuf, 18, total_sent_thistime, True);

    /*
     * Set total params and data to be sent.
     */

    SIVAL(outbuf,smb_ntr_TotalParameterCount,paramsize);
    SIVAL(outbuf,smb_ntr_TotalDataCount,datasize);

    /* 
     * Calculate how many parameters and data we can fit into
     * this packet. Parameters get precedence.
     */

    params_sent_thistime = MIN(params_to_send,useable_space);
    data_sent_thistime = useable_space - params_sent_thistime;
    data_sent_thistime = MIN(data_sent_thistime,data_to_send);

    SIVAL(outbuf,smb_ntr_ParameterCount,params_sent_thistime);

    if(params_sent_thistime == 0) {
      SIVAL(outbuf,smb_ntr_ParameterOffset,0);
      SIVAL(outbuf,smb_ntr_ParameterDisplacement,0);
    } else {
      /*
       * smb_ntr_ParameterOffset is the offset from the start of the SMB header to the
       * parameter bytes, however the first 4 bytes of outbuf are
       * the Netbios over TCP header. Thus use smb_base() to subtract
       * them from the calculation.
       */

      SIVAL(outbuf,smb_ntr_ParameterOffset,
            ((smb_buf(outbuf)+alignment_offset) - smb_base(outbuf)));
      /* 
       * Absolute displacement of param bytes sent in this packet.
       */

      SIVAL(outbuf,smb_ntr_ParameterDisplacement,pp - params);
    }

    /*
     * Deal with the data portion.
     */

    SIVAL(outbuf,smb_ntr_DataCount, data_sent_thistime);

    if(data_sent_thistime == 0) {
      SIVAL(outbuf,smb_ntr_DataOffset,0);
      SIVAL(outbuf,smb_ntr_DataDisplacement, 0);
    } else {
      /*
       * The offset of the data bytes is the offset of the
       * parameter bytes plus the number of parameters being sent this time.
       */

      SIVAL(outbuf,smb_ntr_DataOffset,((smb_buf(outbuf)+alignment_offset) -
            smb_base(outbuf)) + params_sent_thistime + data_alignment_offset);
      SIVAL(outbuf,smb_ntr_DataDisplacement, pd - pdata);
    }

    /* 
     * Copy the param bytes into the packet.
     */

    if(params_sent_thistime)
      memcpy((smb_buf(outbuf)+alignment_offset),pp,params_sent_thistime);

    /*
     * Copy in the data bytes
     */

    if(data_sent_thistime)
      memcpy(smb_buf(outbuf)+alignment_offset+params_sent_thistime+
             data_alignment_offset,pd,data_sent_thistime);
    
    DEBUG(9,("nt_rep: params_sent_thistime = %d, data_sent_thistime = %d, useable_space = %d\n",
          params_sent_thistime, data_sent_thistime, useable_space));
    DEBUG(9,("nt_rep: params_to_send = %d, data_to_send = %d, paramsize = %d, datasize = %d\n",
          params_to_send, data_to_send, paramsize, datasize));
    
    /* Send the packet */
    send_smb(smbd_server_fd(),outbuf);
    
    pp += params_sent_thistime;
    pd += data_sent_thistime;
    
    params_to_send -= params_sent_thistime;
    data_to_send -= data_sent_thistime;

    /*
     * Sanity check
     */

    if(params_to_send < 0 || data_to_send < 0) {
      DEBUG(0,("send_nt_replies failed sanity check pts = %d, dts = %d\n!!!",
            params_to_send, data_to_send));
      return -1;
    }
  } 

  return 0;
}

/****************************************************************************
 (Hopefully) temporary call to fix bugs in NT5.0beta2. This OS sends unicode
 strings in NT calls AND DOESN'T SET THE UNICODE BIT !!!!!!!
****************************************************************************/

static void get_filename( char *fname, char *inbuf, int data_offset, int data_len, int fname_len)
{
  /*
   * We need various heuristics here to detect a unicode string... JRA.
   */

  DEBUG(10,("get_filename: data_offset = %d, data_len = %d, fname_len = %d\n",
           data_offset, data_len, fname_len ));

  if(data_len - fname_len > 1) {
    /*
     * NT 5.0 Beta 2 has kindly sent us a UNICODE string
     * without bothering to set the unicode bit. How kind.
     *
     * Firstly - ensure that the data offset is aligned
     * on a 2 byte boundary - add one if not.
     */
    fname_len = fname_len/2;
    if(data_offset & 1)
      data_offset++;
    pstrcpy(fname, dos_unistrn2((uint16 *)(inbuf+data_offset), fname_len));
  } else {
    StrnCpy(fname,inbuf+data_offset,fname_len);
    fname[fname_len] = '\0';
  }
}

/****************************************************************************
 Fix bugs in Win2000 final release. In trans calls this OS sends unicode
 strings AND DOESN'T SET THE UNICODE BIT !!!!!!!
****************************************************************************/

static void get_filename_transact( char *fname, char *inbuf, int data_offset, int data_len, int fname_len)
{
  /*
   * We need various heuristics here to detect a unicode string... JRA.
   */

  DEBUG(10,("get_filename_transact: data_offset = %d, data_len = %d, fname_len = %d\n",
           data_offset, data_len, fname_len ));

  /*
   * Win2K sends a unicode filename plus one extra alingment byte.
   * WinNT4.x send an ascii string with multiple garbage bytes on
   * the end here.
   */

  if((data_len == 1) || (inbuf[data_offset] == '\0')) {
    /*
     * Ensure that the data offset is aligned
     * on a 2 byte boundary - add one if not.
     */
    fname_len = fname_len/2;
    if(data_offset & 1)
      data_offset++;
    pstrcpy(fname, dos_unistrn2((uint16 *)(inbuf+data_offset), fname_len));
  } else {
    StrnCpy(fname,inbuf+data_offset,fname_len);
    fname[fname_len] = '\0';
  }
}

/****************************************************************************
 Save case statics.
****************************************************************************/

static BOOL saved_case_sensitive;
static BOOL saved_case_preserve;
static BOOL saved_short_case_preserve;

/****************************************************************************
 Save case semantics.
****************************************************************************/

static void set_posix_case_semantics(uint32 file_attributes)
{
  if(!(file_attributes & FILE_FLAG_POSIX_SEMANTICS))
    return;

  saved_case_sensitive = case_sensitive;
  saved_case_preserve = case_preserve;
  saved_short_case_preserve = short_case_preserve;

  /* Set to POSIX. */
  case_sensitive = True;
  case_preserve = True;
  short_case_preserve = True;
}

/****************************************************************************
 Restore case semantics.
****************************************************************************/

static void restore_case_semantics(uint32 file_attributes)
{
  if(!(file_attributes & FILE_FLAG_POSIX_SEMANTICS))
    return;

  case_sensitive = saved_case_sensitive;
  case_preserve = saved_case_preserve;
  short_case_preserve = saved_short_case_preserve;
}

/****************************************************************************
 Utility function to map create disposition.
****************************************************************************/

static int map_create_disposition( uint32 create_disposition)
{
  int ret;

  switch( create_disposition ) {
  case FILE_CREATE:
    /* create if not exist, fail if exist */
    ret = (FILE_CREATE_IF_NOT_EXIST|FILE_EXISTS_FAIL);
    break;
  case FILE_SUPERSEDE:
  case FILE_OVERWRITE_IF:
    /* create if not exist, trunc if exist */
    ret = (FILE_CREATE_IF_NOT_EXIST|FILE_EXISTS_TRUNCATE);
    break;
  case FILE_OPEN:
    /* fail if not exist, open if exists */
    ret = (FILE_FAIL_IF_NOT_EXIST|FILE_EXISTS_OPEN);
    break;
  case FILE_OPEN_IF:
    /* create if not exist, open if exists */
    ret = (FILE_CREATE_IF_NOT_EXIST|FILE_EXISTS_OPEN);
    break;
  case FILE_OVERWRITE:
    /* fail if not exist, truncate if exists */
    ret = (FILE_FAIL_IF_NOT_EXIST|FILE_EXISTS_TRUNCATE);
    break;
  default:
    DEBUG(0,("map_create_disposition: Incorrect value for create_disposition = %d\n",
             create_disposition ));
    return -1;
  }

  DEBUG(10,("map_create_disposition: Mapped create_disposition %lx to %x\n",
        (unsigned long)create_disposition, ret ));

  return ret;
}

/****************************************************************************
 Utility function to map share modes.
****************************************************************************/

static int map_share_mode( BOOL *pstat_open_only, char *fname,
							uint32 desired_access, uint32 share_access, uint32 file_attributes)
{
  int smb_open_mode = -1;

  *pstat_open_only = False;

  switch( desired_access & (FILE_READ_DATA|FILE_WRITE_DATA|FILE_APPEND_DATA) ) {
  case FILE_READ_DATA:
    smb_open_mode = DOS_OPEN_RDONLY;
    break;
  case FILE_WRITE_DATA:
  case FILE_APPEND_DATA:
  case FILE_WRITE_DATA|FILE_APPEND_DATA:
    smb_open_mode = DOS_OPEN_WRONLY;
    break;
  case FILE_READ_DATA|FILE_WRITE_DATA:
  case FILE_READ_DATA|FILE_WRITE_DATA|FILE_APPEND_DATA:
  case FILE_READ_DATA|FILE_APPEND_DATA:
    smb_open_mode = DOS_OPEN_RDWR;
    break;
  }

  /*
   * NB. For DELETE_ACCESS we should really check the
   * directory permissions, as that is what controls
   * delete, and for WRITE_DAC_ACCESS we should really
   * check the ownership, as that is what controls the
   * chmod. Note that this is *NOT* a security hole (this
   * note is for you, Andrew) as we are not *allowing*
   * the access at this point, the actual unlink or
   * chown or chmod call would do this. We are just helping
   * clients out by telling them if they have a hope
   * of any of this succeeding. POSIX acls may still
   * deny the real call. JRA.
   */

  if (smb_open_mode == -1) {

	if(desired_access == WRITE_DAC_ACCESS || desired_access == READ_CONTROL_ACCESS)
		*pstat_open_only = True;

    if(desired_access & (DELETE_ACCESS|WRITE_DAC_ACCESS|WRITE_OWNER_ACCESS|
                              FILE_EXECUTE|FILE_READ_ATTRIBUTES|
                              FILE_READ_EA|FILE_WRITE_EA|SYSTEM_SECURITY_ACCESS|
                              FILE_WRITE_ATTRIBUTES|READ_CONTROL_ACCESS)) {
      smb_open_mode = DOS_OPEN_RDONLY;
	} else if(desired_access == 0) {

		/* 
		 * JRA - NT seems to sometimes send desired_access as zero. play it safe
		 * and map to a stat open.
		 */

		*pstat_open_only = True;
		smb_open_mode = DOS_OPEN_RDONLY;

	} else {
      DEBUG(0,("map_share_mode: Incorrect value %lx for desired_access to file %s\n",
             (unsigned long)desired_access, fname));
      return -1;
    }
  }

  /*
   * Set the special bit that means allow share delete.
   * This is held outside the normal share mode bits at 1<<15.
   * JRA.
   */

  if(share_access & FILE_SHARE_DELETE)
    smb_open_mode |= ALLOW_SHARE_DELETE;

  /* Add in the requested share mode. */
  switch( share_access & (FILE_SHARE_READ|FILE_SHARE_WRITE)) {
  case FILE_SHARE_READ:
    smb_open_mode |= SET_DENY_MODE(DENY_WRITE);
    break;
  case FILE_SHARE_WRITE:
    smb_open_mode |= SET_DENY_MODE(DENY_READ);
    break;
  case (FILE_SHARE_READ|FILE_SHARE_WRITE):
    smb_open_mode |= SET_DENY_MODE(DENY_NONE);
    break;
  case FILE_SHARE_NONE:
    smb_open_mode |= SET_DENY_MODE(DENY_ALL);
    break;
  }

  /*
   * Handle an O_SYNC request.
   */

  if(file_attributes & FILE_FLAG_WRITE_THROUGH)
    smb_open_mode |= FILE_SYNC_OPENMODE;

  DEBUG(10,("map_share_mode: Mapped desired access %lx, share access %lx, file attributes %lx \
to open_mode %x\n", (unsigned long)desired_access, (unsigned long)share_access,
                    (unsigned long)file_attributes, smb_open_mode ));
 
  return smb_open_mode;
}

#if 0
/*
 * This is a *disgusting* hack.
 * This is *so* bad that even I'm embarrassed (and I
 * have no shame). Here's the deal :
 * Until we get the correct SPOOLSS code into smbd
 * then when we're running with NT SMB support then
 * NT makes this call with a level of zero, and then
 * immediately follows it with an open request to
 * the \\SRVSVC pipe. If we allow that open to
 * succeed then NT barfs when it cannot open the
 * \\SPOOLSS pipe immediately after and continually
 * whines saying "Printer name is invalid" forever
 * after. If we cause *JUST THIS NEXT OPEN* of \\SRVSVC
 * to fail, then NT downgrades to using the downlevel code
 * and everything works as well as before. I hate
 * myself for adding this code.... JRA.
 *
 * The HACK_FAIL_TIME define allows only a 2
 * second window for this to occur, just in
 * case...
 */

static BOOL fail_next_srvsvc = False;
static time_t fail_time;
#define HACK_FAIL_TIME 2 /* In seconds. */

void fail_next_srvsvc_open(void)
{
  /* Check client is WinNT proper; Win2K doesn't like Jeremy's hack - matty */
  if (get_remote_arch() != RA_WINNT)
    return;

  fail_next_srvsvc = True;
  fail_time = time(NULL);
  DEBUG(10,("fail_next_srvsvc_open: setting up timeout close of \\srvsvc pipe for print fix.\n"));
}

/*
 * HACK alert.... see above - JRA.
 */

BOOL should_fail_next_srvsvc_open(const char *pipename)
{

  DEBUG(10,("should_fail_next_srvsvc_open: fail = %d, pipe = %s\n",
    (int)fail_next_srvsvc, pipename));

  if(fail_next_srvsvc && (time(NULL) > fail_time + HACK_FAIL_TIME)) {
    fail_next_srvsvc = False;
    fail_time = (time_t)0;
    DEBUG(10,("should_fail_next_srvsvc_open: End of timeout close of \\srvsvc pipe for print fix.\n"));
  }

  if(fail_next_srvsvc && strequal(pipename, "srvsvc")) {
    fail_next_srvsvc = False;
    DEBUG(10,("should_fail_next_srvsvc_open: Deliberately failing open of \\srvsvc pipe for print fix.\n"));
    return True;
  }
  return False;
}
#endif

/****************************************************************************
 Reply to an NT create and X call on a pipe.
****************************************************************************/
static int nt_open_pipe(char *fname, connection_struct *conn,
			char *inbuf, char *outbuf, int *ppnum)
{
	pipes_struct *p = NULL;

	uint16 vuid = SVAL(inbuf, smb_uid);
	int i;

	DEBUG(4,("nt_open_pipe: Opening pipe %s.\n", fname));
    
	/* See if it is one we want to handle. */
	for( i = 0; known_nt_pipes[i]; i++ )
		if( strequal(fname,known_nt_pipes[i]))
			break;
    
	if ( known_nt_pipes[i] == NULL )
		return(ERROR(ERRSRV,ERRaccess));
    
	/* Strip \\ off the name. */
	fname++;
    
#if 0
	if(should_fail_next_srvsvc_open(fname))
		return (ERROR(ERRSRV,ERRaccess));
#endif

	DEBUG(3,("nt_open_pipe: Known pipe %s opening.\n", fname));

	p = open_rpc_pipe_p(fname, conn, vuid);
	if (!p)
		return(ERROR(ERRSRV,ERRnofids));

	*ppnum = p->pnum;

	return 0;
}

/****************************************************************************
 Reply to an NT create and X call for pipes.
****************************************************************************/

static int do_ntcreate_pipe_open(connection_struct *conn,
			 char *inbuf,char *outbuf,int length,int bufsize)
{
	pstring fname;
	int ret;
	int pnum = -1;
	char *p = NULL;
	uint32 fname_len = MIN(((uint32)SVAL(inbuf,smb_ntcreate_NameLength)),
			       ((uint32)sizeof(fname)-1));

	get_filename(fname, inbuf, smb_buf(inbuf)-inbuf, 
                  smb_buflen(inbuf),fname_len);
	if ((ret = nt_open_pipe(fname, conn, inbuf, outbuf, &pnum)) != 0)
		return ret;

	/*
	 * Deal with pipe return.
	 */  

	set_message(outbuf,34,0,True);

	p = outbuf + smb_vwv2;
	p++;
	SSVAL(p,0,pnum);
	p += 2;
	SIVAL(p,0,FILE_WAS_OPENED);
	p += 4;
	p += 32;
	SIVAL(p,0,FILE_ATTRIBUTE_NORMAL); /* File Attributes. */
	p += 20;
	/* File type. */
	SSVAL(p,0,FILE_TYPE_MESSAGE_MODE_PIPE);
	/* Device state. */
	SSVAL(p,2, 0x5FF); /* ? */

	DEBUG(5,("do_ntcreate_pipe_open: open pipe = %s\n", fname));

	return chain_reply(inbuf,outbuf,length,bufsize);
}

/****************************************************************************
 Reply to an NT create and X call.
****************************************************************************/

int reply_ntcreate_and_X(connection_struct *conn,
			 char *inbuf,char *outbuf,int length,int bufsize)
{  
	int result;
	pstring fname;
	uint32 flags = IVAL(inbuf,smb_ntcreate_Flags);
	uint32 desired_access = IVAL(inbuf,smb_ntcreate_DesiredAccess);
	uint32 file_attributes = IVAL(inbuf,smb_ntcreate_FileAttributes);
	uint32 share_access = IVAL(inbuf,smb_ntcreate_ShareAccess);
	uint32 create_disposition = IVAL(inbuf,smb_ntcreate_CreateDisposition);
	uint32 create_options = IVAL(inbuf,smb_ntcreate_CreateOptions);
	uint32 fname_len = MIN(((uint32)SVAL(inbuf,smb_ntcreate_NameLength)),
			       ((uint32)sizeof(fname)-1));
	uint16 root_dir_fid = (uint16)IVAL(inbuf,smb_ntcreate_RootDirectoryFid);
	int smb_ofun;
	int smb_open_mode;
	int smb_attr = (file_attributes & SAMBA_ATTRIBUTES_MASK);
	/* Breakout the oplock request bits so we can set the
	   reply bits separately. */
	int oplock_request = 0;
	mode_t unixmode;
	int fmode=0,rmode=0;
	SMB_OFF_T file_len = 0;
	SMB_STRUCT_STAT sbuf;
	int smb_action = 0;
	BOOL bad_path = False;
	files_struct *fsp=NULL;
	char *p = NULL;
	BOOL stat_open_only = False;
	START_PROFILE(SMBntcreateX);

	/* If it's an IPC, use the pipe handler. */

	if (IS_IPC(conn)) {
		if (lp_nt_pipe_support()) {
			END_PROFILE(SMBntcreateX);
			return do_ntcreate_pipe_open(conn,inbuf,outbuf,length,bufsize);
		} else {
			END_PROFILE(SMBntcreateX);
			return(ERROR(ERRDOS,ERRbadaccess));
		}
	}
			

	/* 
	 * We need to construct the open_and_X ofun value from the
	 * NT values, as that's what our code is structured to accept.
	 */    
	
	if((smb_ofun = map_create_disposition( create_disposition )) == -1) {
		END_PROFILE(SMBntcreateX);
		return(ERROR(ERRDOS,ERRbadaccess));
	}

	/*
	 * Get the file name.
	 */

    if(root_dir_fid != 0) {
      /*
       * This filename is relative to a directory fid.
       */
      files_struct *dir_fsp = file_fsp(inbuf,smb_ntcreate_RootDirectoryFid);
      size_t dir_name_len;

      if(!dir_fsp) {
	END_PROFILE(SMBntcreateX);
        return(ERROR(ERRDOS,ERRbadfid));
      }

      if(!dir_fsp->is_directory) {
        /* 
         * Check to see if this is a mac fork of some kind.
         */

        get_filename(&fname[0], inbuf, smb_buf(inbuf)-inbuf, 
                   smb_buflen(inbuf),fname_len);

        if( strchr(fname, ':')) {
          SSVAL(outbuf, smb_flg2, FLAGS2_32_BIT_ERROR_CODES);
          END_PROFILE(SMBntcreateX);
          return(ERROR(0, NT_STATUS_OBJECT_PATH_NOT_FOUND));
        }
	END_PROFILE(SMBntcreateX);
        return(ERROR(ERRDOS,ERRbadfid));
      }

      /*
       * Copy in the base directory name.
       */

      pstrcpy( fname, dir_fsp->fsp_name );
      dir_name_len = strlen(fname);

      /*
       * Ensure it ends in a '\'.
       */

      if(fname[dir_name_len-1] != '\\' && fname[dir_name_len-1] != '/') {
        pstrcat(fname, "\\");
        dir_name_len++;
      }

      /*
       * This next calculation can refuse a correct filename if we're dealing
       * with the Win2k unicode bug, but that would be rare. JRA.
       */

      if(fname_len + dir_name_len >= sizeof(pstring)) {
	END_PROFILE(SMBntcreateX);
        return(ERROR(ERRSRV,ERRfilespecs));
      }

      get_filename(&fname[dir_name_len], inbuf, smb_buf(inbuf)-inbuf, 
                   smb_buflen(inbuf),fname_len);

    } else {
      
      get_filename(fname, inbuf, smb_buf(inbuf)-inbuf, 
                   smb_buflen(inbuf),fname_len);
    }
	
	/*
	 * Now contruct the smb_open_mode value from the filename, 
     * desired access and the share access.
	 */
	RESOLVE_DFSPATH(fname, conn, inbuf, outbuf);

	if((smb_open_mode = map_share_mode(&stat_open_only, fname, desired_access, 
					   share_access, 
					   file_attributes)) == -1) {
		END_PROFILE(SMBntcreateX);
		return(ERROR(ERRDOS,ERRbadaccess));
	}

	oplock_request = (flags & REQUEST_OPLOCK) ? EXCLUSIVE_OPLOCK : 0;
	oplock_request |= (flags & REQUEST_BATCH_OPLOCK) ? BATCH_OPLOCK : 0;

	/*
	 * Ordinary file or directory.
	 */
		
	/*
	 * Check if POSIX semantics are wanted.
	 */
		
	set_posix_case_semantics(file_attributes);
		
	unix_convert(fname,conn,0,&bad_path,&sbuf);
		
	unixmode = unix_mode(conn,smb_attr | aARCH, fname);
    
	/* 
	 * If it's a request for a directory open, deal with it separately.
	 */

	if(create_options & FILE_DIRECTORY_FILE) {
		oplock_request = 0;
		
		fsp = open_directory(conn, fname, &sbuf, smb_ofun, unixmode, &smb_action);
			
		restore_case_semantics(file_attributes);

		if(!fsp) {
			if((errno == ENOENT) && bad_path) {
				unix_ERR_class = ERRDOS;
				unix_ERR_code = ERRbadpath;
			}
			END_PROFILE(SMBntcreateX);
			return(UNIXERROR(ERRDOS,ERRnoaccess));
		}
	} else {
		/*
		 * Ordinary file case.
		 */

		/* NB. We have a potential bug here. If we
		 * cause an oplock break to ourselves, then we
		 * could end up processing filename related
		 * SMB requests whilst we await the oplock
		 * break response. As we may have changed the
		 * filename case semantics to be POSIX-like,
		 * this could mean a filename request could
		 * fail when it should succeed. This is a rare
		 * condition, but eventually we must arrange
		 * to restore the correct case semantics
		 * before issuing an oplock break request to
		 * our client. JRA.  */

		fsp = open_file_shared(conn,fname,&sbuf,smb_open_mode,
				 smb_ofun,unixmode, oplock_request,&rmode,&smb_action);

		if (!fsp) { 
			/* We cheat here. There are two cases we
			 * care about. One is a directory rename,
			 * where the NT client will attempt to
			 * open the source directory for
			 * DELETE access. Note that when the
			 * NT client does this it does *not*
			 * set the directory bit in the
			 * request packet. This is translated
			 * into a read/write open
			 * request. POSIX states that any open
			 * for write request on a directory
			 * will generate an EISDIR error, so
			 * we can catch this here and open a
			 * pseudo handle that is flagged as a
			 * directory. The second is an open
			 * for a permissions read only, which
			 * we handle in the open_file_stat case. JRA.
			 */

			if(errno == EISDIR) {

				/*
				 * Fail the open if it was explicitly a non-directory file.
				 */

				if (create_options & FILE_NON_DIRECTORY_FILE) {
					restore_case_semantics(file_attributes);
					SSVAL(outbuf, smb_flg2, FLAGS2_32_BIT_ERROR_CODES);
					END_PROFILE(SMBntcreateX);
					return(ERROR(0, NT_STATUS_FILE_IS_A_DIRECTORY));
				}
	
				oplock_request = 0;
				fsp = open_directory(conn, fname, &sbuf, smb_ofun, unixmode, &smb_action);
				
				if(!fsp) {
					restore_case_semantics(file_attributes);
					if((errno == ENOENT) && bad_path) {
						unix_ERR_class = ERRDOS;
						unix_ERR_code = ERRbadpath;
					}
					END_PROFILE(SMBntcreateX);
					return(UNIXERROR(ERRDOS,ERRnoaccess));
				}
#ifdef EROFS
			} else if (((errno == EACCES) || (errno == EROFS)) && stat_open_only) {
#else /* !EROFS */
			} else if (errno == EACCES && stat_open_only) {
#endif
				/*
				 * We couldn't open normally and all we want
				 * are the permissions. Try and do a stat open.
				 */

				oplock_request = 0;

				fsp = open_file_stat(conn,fname,&sbuf,smb_open_mode,&smb_action);

				if(!fsp) {
					restore_case_semantics(file_attributes);
					END_PROFILE(SMBntcreateX);
					return(UNIXERROR(ERRDOS,ERRnoaccess));
				}

			} else {

				if((errno == ENOENT) && bad_path) {
					unix_ERR_class = ERRDOS;
					unix_ERR_code = ERRbadpath;
				}
				
				restore_case_semantics(file_attributes);
				
				END_PROFILE(SMBntcreateX);
				return(UNIXERROR(ERRDOS,ERRnoaccess));
			}
		} 
	}
		
	restore_case_semantics(file_attributes);
		
	file_len = sbuf.st_size;
	fmode = dos_mode(conn,fname,&sbuf);
	if(fmode == 0)
		fmode = FILE_ATTRIBUTE_NORMAL;
	if (!fsp->is_directory && (fmode & aDIR)) {
		close_file(fsp,False);
		END_PROFILE(SMBntcreateX);
		return(ERROR(ERRDOS,ERRnoaccess));
	} 
	
	/* 
	 * If the caller set the extended oplock request bit
	 * and we granted one (by whatever means) - set the
	 * correct bit for extended oplock reply.
	 */
	
	if (oplock_request && lp_fake_oplocks(SNUM(conn)))
		smb_action |= EXTENDED_OPLOCK_GRANTED;
	
	if(oplock_request && EXCLUSIVE_OPLOCK_TYPE(fsp->oplock_type))
		smb_action |= EXTENDED_OPLOCK_GRANTED;

	set_message(outbuf,34,0,True);
	
	p = outbuf + smb_vwv2;
	
	/*
	 * Currently as we don't support level II oplocks we just report
	 * exclusive & batch here.
	 */

    if (smb_action & EXTENDED_OPLOCK_GRANTED)	
	  	SCVAL(p,0, BATCH_OPLOCK_RETURN);
	else if (LEVEL_II_OPLOCK_TYPE(fsp->oplock_type))
        SCVAL(p,0, LEVEL_II_OPLOCK_RETURN);
	else
		SCVAL(p,0,NO_OPLOCK_RETURN);
	
	p++;
	SSVAL(p,0,fsp->fnum);
	p += 2;
	SIVAL(p,0,smb_action);
	p += 4;
	
	/* Create time. */  
	put_long_date(p,get_create_time(&sbuf,lp_fake_dir_create_times(SNUM(conn))));
	p += 8;
	put_long_date(p,sbuf.st_atime); /* access time */
	p += 8;
	put_long_date(p,sbuf.st_mtime); /* write time */
	p += 8;
	put_long_date(p,sbuf.st_mtime); /* change time */
	p += 8;
	SIVAL(p,0,fmode); /* File Attributes. */
	p += 4;
	SOFF_T(p, 0, file_len);
	p += 8;
	SOFF_T(p,0,file_len);
	p += 12;
	SCVAL(p,0,fsp->is_directory ? 1 : 0);
	
	DEBUG(5,("reply_ntcreate_and_X: fnum = %d, open name = %s\n", fsp->fnum, fsp->fsp_name));

	result = chain_reply(inbuf,outbuf,length,bufsize);
	END_PROFILE(SMBntcreateX);
	return result;
}

/****************************************************************************
 Reply to a NT_TRANSACT_CREATE call to open a pipe.
****************************************************************************/

static int do_nt_transact_create_pipe( connection_struct *conn,
					char *inbuf, char *outbuf, int length, 
					int bufsize, char **ppsetup, char **ppparams, 
					char **ppdata)
{
	pstring fname;
	uint32 fname_len;
	int total_parameter_count = (int)IVAL(inbuf, smb_nt_TotalParameterCount);
	char *params = *ppparams;
	int ret;
	int pnum = -1;
	char *p = NULL;

	/*
	 * Ensure minimum number of parameters sent.
	 */

	if(total_parameter_count < 54) {
		DEBUG(0,("do_nt_transact_create_pipe - insufficient parameters (%u)\n", (unsigned int)total_parameter_count));
		return(ERROR(ERRDOS,ERRbadaccess));
	}

	fname_len = MIN(((uint32)IVAL(params,44)),((uint32)sizeof(fname)-1));

	get_filename_transact(&fname[0], params, 53,
			total_parameter_count - 53 - fname_len, fname_len);

    if ((ret = nt_open_pipe(fname, conn, inbuf, outbuf, &pnum)) != 0)
      return ret;

	/* Realloc the size of parameters and data we will return */
	params = Realloc(*ppparams, 69);
	if(params == NULL)
		return(ERROR(ERRDOS,ERRnomem));

	*ppparams = params;

	memset((char *)params,'\0',69);

	p = params;
	SCVAL(p,0,NO_OPLOCK_RETURN);

	p += 2;
	SSVAL(p,0,pnum);
	p += 2;
	SIVAL(p,0,FILE_WAS_OPENED);
	p += 8;

	p += 32;
	SIVAL(p,0,FILE_ATTRIBUTE_NORMAL); /* File Attributes. */
	p += 20;
	/* File type. */
	SSVAL(p,0,FILE_TYPE_MESSAGE_MODE_PIPE);
	/* Device state. */
	SSVAL(p,2, 0x5FF); /* ? */

	DEBUG(5,("do_nt_transact_create_pipe: open name = %s\n", fname));

	/* Send the required number of replies */
	send_nt_replies(inbuf, outbuf, bufsize, 0, params, 69, *ppdata, 0);

	return -1;
}

/****************************************************************************
 Internal fn to set security descriptors.
****************************************************************************/

static BOOL set_sd(files_struct *fsp, char *data, uint32 sd_len, uint security_info_sent, int *pdef_class,uint32 *pdef_code)
{
	prs_struct pd;
	SEC_DESC *psd = NULL;
	TALLOC_CTX *mem_ctx;
	BOOL ret;

	if (sd_len == 0) {
		*pdef_class = ERRDOS;
		*pdef_code = ERRbadaccess;
		return False;
	}

	/*
	 * Init the parse struct we will unmarshall from.
	 */

	if ((mem_ctx = talloc_init()) == NULL) {
		DEBUG(0,("set_sd: talloc_init failed.\n"));
		*pdef_class = ERRDOS;
		*pdef_code = ERRnomem;
		return False;
	}

	prs_init(&pd, 0, 4, mem_ctx, UNMARSHALL);

	/*
	 * Setup the prs_struct to point at the memory we just
	 * allocated.
	 */
	
	prs_give_memory( &pd, data, sd_len, False);

	/*
	 * Finally, unmarshall from the data buffer.
	 */

	if(!sec_io_desc( "sd data", &psd, &pd, 1)) {
		free_sec_desc(&psd);
		DEBUG(0,("set_sd: Error in unmarshalling security descriptor.\n"));
		/*
		 * Return access denied for want of a better error message..
		 */ 
		talloc_destroy(mem_ctx);
		*pdef_class = ERRDOS;
		*pdef_code = ERRnomem;
		return False;
	}

	if (psd->off_owner_sid==0)
		security_info_sent &= ~OWNER_SECURITY_INFORMATION;
	if (psd->off_grp_sid==0)
		security_info_sent &= ~GROUP_SECURITY_INFORMATION;
	if (psd->off_sacl==0)
		security_info_sent &= ~DACL_SECURITY_INFORMATION;
	if (psd->off_dacl==0)
		security_info_sent &= ~SACL_SECURITY_INFORMATION;
	
	ret = set_nt_acl( fsp, security_info_sent, psd);

	if (!ret) {
		free_sec_desc(&psd);
		talloc_destroy(mem_ctx);
		*pdef_class = ERRDOS;
		*pdef_code = ERRnoaccess;
		return False;
	}

	free_sec_desc(&psd);
	talloc_destroy(mem_ctx);

	*pdef_class = 0;
	*pdef_code = 0;
	return True;
}

/****************************************************************************
 Reply to a NT_TRANSACT_CREATE call (needs to process SD's).
****************************************************************************/

static int call_nt_transact_create(connection_struct *conn,
					char *inbuf, char *outbuf, int length, 
					int bufsize, char **ppsetup, char **ppparams, 
					char **ppdata)
{
  pstring fname;
  char *params = *ppparams;
  char *data = *ppdata;
  int total_parameter_count = (int)IVAL(inbuf, smb_nt_TotalParameterCount);
  /* Breakout the oplock request bits so we can set the
     reply bits separately. */
  int oplock_request = 0;
  mode_t unixmode;
  int fmode=0,rmode=0;
  SMB_OFF_T file_len = 0;
  SMB_STRUCT_STAT sbuf;
  int smb_action = 0;
  BOOL bad_path = False;
  files_struct *fsp = NULL;
  char *p = NULL;
  BOOL stat_open_only = False;
  uint32 flags;
  uint32 desired_access;
  uint32 file_attributes;
  uint32 share_access;
  uint32 create_disposition;
  uint32 create_options;
  uint32 fname_len;
  uint32 sd_len;
  uint16 root_dir_fid;
  int smb_ofun;
  int smb_open_mode;
  int smb_attr;
  int error_class;
  uint32 error_code;

  DEBUG(5,("call_nt_transact_create\n"));

  /*
   * If it's an IPC, use the pipe handler.
   */

  if (IS_IPC(conn)) {
		if (lp_nt_pipe_support())
			return do_nt_transact_create_pipe(conn, inbuf, outbuf, length, 
					bufsize, ppsetup, ppparams, ppdata);
		else
			return(ERROR(ERRDOS,ERRbadaccess));
  }

  /*
   * Ensure minimum number of parameters sent.
   */

  if(total_parameter_count < 54) {
    DEBUG(0,("call_nt_transact_create - insufficient parameters (%u)\n", (unsigned int)total_parameter_count));
    return(ERROR(ERRDOS,ERRbadaccess));
  }

  flags = IVAL(params,0);
  desired_access = IVAL(params,8);
  file_attributes = IVAL(params,20);
  share_access = IVAL(params,24);
  create_disposition = IVAL(params,28);
  create_options = IVAL(params,32);
  sd_len = IVAL(params,36);
  fname_len = MIN(((uint32)IVAL(params,44)),((uint32)sizeof(fname)-1));
  root_dir_fid = (uint16)IVAL(params,4);
  smb_attr = (file_attributes & SAMBA_ATTRIBUTES_MASK);

  /* 
   * We need to construct the open_and_X ofun value from the
   * NT values, as that's what our code is structured to accept.
   */    

  if((smb_ofun = map_create_disposition( create_disposition )) == -1)
    return(ERROR(ERRDOS,ERRbadmem));

  /*
   * Get the file name.
   */

  if(root_dir_fid != 0) {
    /*
     * This filename is relative to a directory fid.
     */

    files_struct *dir_fsp = file_fsp(params,4);
    size_t dir_name_len;

    if(!dir_fsp)
        return(ERROR(ERRDOS,ERRbadfid));

    if(!dir_fsp->is_directory) {
      /*
       * Check to see if this is a mac fork of some kind.
       */

      get_filename_transact(&fname[0], params, 53,
                            total_parameter_count - 53 - fname_len, fname_len);

      if( strchr(fname, ':')) {
          SSVAL(outbuf, smb_flg2, FLAGS2_32_BIT_ERROR_CODES);
          return(ERROR(0, NT_STATUS_OBJECT_PATH_NOT_FOUND));
      }

      return(ERROR(ERRDOS,ERRbadfid));
    }

    /*
     * Copy in the base directory name.
     */

    pstrcpy( fname, dir_fsp->fsp_name );
    dir_name_len = strlen(fname);

    /*
     * Ensure it ends in a '\'.
     */

    if((fname[dir_name_len-1] != '\\') && (fname[dir_name_len-1] != '/')) {
      pstrcat(fname, "\\");
      dir_name_len++;
    }

    /*
     * This next calculation can refuse a correct filename if we're dealing
     * with the Win2k unicode bug, but that would be rare. JRA.
     */

    if(fname_len + dir_name_len >= sizeof(pstring))
      return(ERROR(ERRSRV,ERRfilespecs));

    get_filename_transact(&fname[dir_name_len], params, 53,
                 total_parameter_count - 53 - fname_len, fname_len);

  } else {
    get_filename_transact(&fname[0], params, 53,
                 total_parameter_count - 53 - fname_len, fname_len);
  }

  /*
   * Now contruct the smb_open_mode value from the desired access
   * and the share access.
   */

  if((smb_open_mode = map_share_mode( &stat_open_only, fname, desired_access,
                                      share_access, file_attributes)) == -1)
    return(ERROR(ERRDOS,ERRbadaccess));

  oplock_request = (flags & REQUEST_OPLOCK) ? EXCLUSIVE_OPLOCK : 0;
  oplock_request |= (flags & REQUEST_BATCH_OPLOCK) ? BATCH_OPLOCK : 0;

  /*
   * Check if POSIX semantics are wanted.
   */

  set_posix_case_semantics(file_attributes);
    
  RESOLVE_DFSPATH(fname, conn, inbuf, outbuf);

  unix_convert(fname,conn,0,&bad_path,&sbuf);
    
  unixmode = unix_mode(conn,smb_attr | aARCH, fname);
   
  /*
   * If it's a request for a directory open, deal with it separately.
   */

  if(create_options & FILE_DIRECTORY_FILE) {

    oplock_request = 0;

    /*
     * We will get a create directory here if the Win32
     * app specified a security descriptor in the 
     * CreateDirectory() call.
     */

    fsp = open_directory(conn, fname, &sbuf, smb_ofun, unixmode, &smb_action);

    if(!fsp) {
      restore_case_semantics(file_attributes);
      if((errno == ENOENT) && bad_path) {
        unix_ERR_class = ERRDOS;
        unix_ERR_code = ERRbadpath;
      }
      return(UNIXERROR(ERRDOS,ERRnoaccess));
    }

  } else {

    /*
     * Ordinary file case.
     */

    fsp = open_file_shared(conn,fname,&sbuf,smb_open_mode,smb_ofun,unixmode,
                     oplock_request,&rmode,&smb_action);

    if (!fsp) { 

		if(errno == EISDIR) {

			/*
			 * Fail the open if it was explicitly a non-directory file.
			 */

			if (create_options & FILE_NON_DIRECTORY_FILE) {
				restore_case_semantics(file_attributes);
				SSVAL(outbuf, smb_flg2, FLAGS2_32_BIT_ERROR_CODES);
				return(ERROR(0, NT_STATUS_FILE_IS_A_DIRECTORY));
			}
	
			oplock_request = 0;
			fsp = open_directory(conn, fname, &sbuf, smb_ofun, unixmode, &smb_action);
				
			if(!fsp) {
				restore_case_semantics(file_attributes);
				if((errno == ENOENT) && bad_path) {
					unix_ERR_class = ERRDOS;
					unix_ERR_code = ERRbadpath;
				}
				return(UNIXERROR(ERRDOS,ERRnoaccess));
			}
#ifdef EROFS
		} else if (((errno == EACCES) || (errno == EROFS)) && stat_open_only) {
#else /* !EROFS */
		} else if (errno == EACCES && stat_open_only) {
#endif

			/*
			 * We couldn't open normally and all we want
			 * are the permissions. Try and do a stat open.
			 */

			oplock_request = 0;

			fsp = open_file_stat(conn,fname,&sbuf,smb_open_mode,&smb_action);

			if(!fsp) {
				restore_case_semantics(file_attributes);
				return(UNIXERROR(ERRDOS,ERRnoaccess));
			}
		} else {

			if((errno == ENOENT) && bad_path) {
				unix_ERR_class = ERRDOS;
				unix_ERR_code = ERRbadpath;
			}

			restore_case_semantics(file_attributes);

			return(UNIXERROR(ERRDOS,ERRnoaccess));
		}
      } 
  
      file_len = sbuf.st_size;
      fmode = dos_mode(conn,fname,&sbuf);
      if(fmode == 0)
        fmode = FILE_ATTRIBUTE_NORMAL;

      if (fmode & aDIR) {
        close_file(fsp,False);
        restore_case_semantics(file_attributes);
        return(ERROR(ERRDOS,ERRnoaccess));
      } 

      /* 
       * If the caller set the extended oplock request bit
       * and we granted one (by whatever means) - set the
       * correct bit for extended oplock reply.
       */
    
      if (oplock_request && lp_fake_oplocks(SNUM(conn)))
        smb_action |= EXTENDED_OPLOCK_GRANTED;
  
      if(oplock_request && EXCLUSIVE_OPLOCK_TYPE(fsp->oplock_type))
        smb_action |= EXTENDED_OPLOCK_GRANTED;
  }

  /*
   * Now try and apply the desired SD.
   */

  if (!set_sd( fsp, data, sd_len, ALL_SECURITY_INFORMATION, &error_class, &error_code)) {
    close_file(fsp,False);
    restore_case_semantics(file_attributes);
    return(ERROR(error_class, error_code));
  }

  restore_case_semantics(file_attributes);

  /* Realloc the size of parameters and data we will return */
  params = Realloc(*ppparams, 69);
  if(params == NULL)
    return(ERROR(ERRDOS,ERRnomem));

  *ppparams = params;

  memset((char *)params,'\0',69);

  p = params;
  if (smb_action & EXTENDED_OPLOCK_GRANTED)	
  	SCVAL(p,0, BATCH_OPLOCK_RETURN);
  else if (LEVEL_II_OPLOCK_TYPE(fsp->oplock_type))
    SCVAL(p,0, LEVEL_II_OPLOCK_RETURN);
  else
	SCVAL(p,0,NO_OPLOCK_RETURN);
	
  p += 2;
  SSVAL(p,0,fsp->fnum);
  p += 2;
  SIVAL(p,0,smb_action);
  p += 8;

  /* Create time. */
  put_long_date(p,get_create_time(&sbuf,lp_fake_dir_create_times(SNUM(conn))));
  p += 8;
  put_long_date(p,sbuf.st_atime); /* access time */
  p += 8;
  put_long_date(p,sbuf.st_mtime); /* write time */
  p += 8;
  put_long_date(p,sbuf.st_mtime); /* change time */
  p += 8;
  SIVAL(p,0,fmode); /* File Attributes. */
  p += 4;
  SOFF_T(p,0,file_len);
  p += 8;
  SOFF_T(p,0,file_len);

  DEBUG(5,("call_nt_transact_create: open name = %s\n", fname));

  /* Send the required number of replies */
  send_nt_replies(inbuf, outbuf, bufsize, 0, params, 69, *ppdata, 0);

  return -1;
}

/****************************************************************************
 Reply to a NT CANCEL request.
****************************************************************************/
int reply_ntcancel(connection_struct *conn,
		   char *inbuf,char *outbuf,int length,int bufsize)
{
	/*
	 * Go through and cancel any pending change notifies.
	 */
	
	int mid = SVAL(inbuf,smb_mid);
	START_PROFILE(SMBntcancel);
	remove_pending_change_notify_requests_by_mid(mid);
	remove_pending_lock_requests_by_mid(mid);
	
	DEBUG(3,("reply_ntcancel: cancel called on mid = %d.\n", mid));

	END_PROFILE(SMBntcancel);
	return(-1);
}

/****************************************************************************
 Reply to an unsolicited SMBNTtranss - just ignore it!
****************************************************************************/
int reply_nttranss(connection_struct *conn,
		   char *inbuf,char *outbuf,int length,int bufsize)
{
	START_PROFILE(SMBnttranss);
	DEBUG(4,("Ignoring nttranss of length %d\n",length));
	END_PROFILE(SMBnttranss);
	return(-1);
}

/****************************************************************************
 Reply to a notify change - queue the request and 
 don't allow a directory to be opened.
****************************************************************************/
static int call_nt_transact_notify_change(connection_struct *conn,
				   char *inbuf, char *outbuf, int length,
				   int bufsize, 
				   char **ppsetup, 
				   char **ppparams, char **ppdata)
{
  char *setup = *ppsetup;
  files_struct *fsp;
  uint32 flags;

  fsp = file_fsp(setup,4);
  flags = IVAL(setup, 0);

  DEBUG(3,("call_nt_transact_notify_change\n"));

  if(!fsp)
    return(ERROR(ERRDOS,ERRbadfid));

  if((!fsp->is_directory) || (conn != fsp->conn))
    return(ERROR(ERRDOS,ERRbadfid));

  if (!change_notify_set(inbuf, fsp, conn, flags)) {
	  return(UNIXERROR(ERRDOS,ERRbadfid));
  }

  DEBUG(3,("call_nt_transact_notify_change: notify change called on directory \
name = %s\n", fsp->fsp_name ));

  return -1;
}

/****************************************************************************
 Reply to an NT transact rename command.
****************************************************************************/

static int call_nt_transact_rename(connection_struct *conn,
				   char *inbuf, char *outbuf, int length, 
                                   int bufsize,
                                   char **ppsetup, char **ppparams, char **ppdata)
{
  char *params = *ppparams;
  pstring new_name;
  files_struct *fsp = file_fsp(params, 0);
  BOOL replace_if_exists = (SVAL(params,2) & RENAME_REPLACE_IF_EXISTS) ? True : False;
  uint32 fname_len = MIN((((uint32)IVAL(inbuf,smb_nt_TotalParameterCount)-4)),
                         ((uint32)sizeof(new_name)-1));
  int outsize = 0;

  CHECK_FSP(fsp, conn);
  StrnCpy(new_name,params+4,fname_len);
  new_name[fname_len] = '\0';

  outsize = rename_internals(conn, inbuf, outbuf, fsp->fsp_name,
                             new_name, replace_if_exists);
  if(outsize == 0) {
    /*
     * Rename was successful.
     */
    send_nt_replies(inbuf, outbuf, bufsize, 0, NULL, 0, NULL, 0);

    DEBUG(3,("nt transact rename from = %s, to = %s succeeded.\n", 
          fsp->fsp_name, new_name));

    outsize = -1;

	/*
	 * Win2k needs a changenotify request response before it will
	 * update after a rename..
	 */

	process_pending_change_notify_queue((time_t)0);
  }

  return(outsize);
}


/****************************************************************************
 Reply to query a security descriptor - currently this is not implemented (it
 is planned to be though). Right now it just returns the same thing NT would
 when queried on a FAT filesystem. JRA.
****************************************************************************/

static int call_nt_transact_query_security_desc(connection_struct *conn,
                                                char *inbuf, char *outbuf, 
                                                int length, int bufsize, 
                                                char **ppsetup, char **ppparams, char **ppdata)
{
  uint32 max_data_count = IVAL(inbuf,smb_nt_MaxDataCount);
  char *params = *ppparams;
  char *data = *ppdata;
  prs_struct pd;
  SEC_DESC *psd = NULL;
  size_t sd_size;
  TALLOC_CTX *mem_ctx;

  files_struct *fsp = file_fsp(params,0);

  if(!fsp)
    return(ERROR(ERRDOS,ERRbadfid));

  DEBUG(3,("call_nt_transact_query_security_desc: file = %s\n", fsp->fsp_name ));

  params = Realloc(*ppparams, 4);
  if(params == NULL)
    return(ERROR(ERRDOS,ERRnomem));

  *ppparams = params;

  /*
   * Get the permissions to return.
   */

  if((sd_size = get_nt_acl(fsp, &psd)) == 0)
    return(UNIXERROR(ERRDOS,ERRnoaccess));

  DEBUG(3,("call_nt_transact_query_security_desc: sd_size = %d.\n",(int)sd_size));

  SIVAL(params,0,(uint32)sd_size);

  if(max_data_count < sd_size) {

    free_sec_desc(&psd);

    send_nt_replies(inbuf, outbuf, bufsize, NT_STATUS_BUFFER_TOO_SMALL,
                    params, 4, *ppdata, 0);
    return -1;
  }

  /*
   * Allocate the data we will point this at.
   */

  data = Realloc(*ppdata, sd_size);
  if(data == NULL) {
    free_sec_desc(&psd);
    return(ERROR(ERRDOS,ERRnomem));
  }

  *ppdata = data;

  memset(data, '\0', sd_size);

  /*
   * Init the parse struct we will marshall into.
   */

  if ((mem_ctx = talloc_init()) == NULL) {
    DEBUG(0,("call_nt_transact_query_security_desc: talloc_init failed.\n"));
    free_sec_desc(&psd);
    return(ERROR(ERRDOS,ERRnomem));
  }

  prs_init(&pd, 0, 4, mem_ctx, MARSHALL);

  /*
   * Setup the prs_struct to point at the memory we just
   * allocated.
   */

  prs_give_memory( &pd, data, (uint32)sd_size, False);

  /*
   * Finally, linearize into the outgoing buffer.
   */

  if(!sec_io_desc( "sd data", &psd, &pd, 1)) {
    free_sec_desc(&psd);
    DEBUG(0,("call_nt_transact_query_security_desc: Error in marshalling \
security descriptor.\n"));
    /*
     * Return access denied for want of a better error message..
     */ 
    talloc_destroy(mem_ctx);
    return(UNIXERROR(ERRDOS,ERRnoaccess));
  }

  /*
   * Now we can delete the security descriptor.
   */

  free_sec_desc(&psd);
  talloc_destroy(mem_ctx);

  send_nt_replies(inbuf, outbuf, bufsize, 0, params, 4, data, (int)sd_size);
  return -1;
}

/****************************************************************************
 Reply to set a security descriptor. Map to UNIX perms.
****************************************************************************/

static int call_nt_transact_set_security_desc(connection_struct *conn,
									char *inbuf, char *outbuf, int length,
									int bufsize, char **ppsetup, 
									char **ppparams, char **ppdata)
{
  uint32 total_parameter_count = IVAL(inbuf, smb_nts_TotalParameterCount);
  char *params= *ppparams;
  char *data = *ppdata;
  uint32 total_data_count = (uint32)IVAL(inbuf, smb_nts_TotalDataCount);
  files_struct *fsp = NULL;
  uint32 security_info_sent = 0;
  int error_class;
  uint32 error_code;

  if(!lp_nt_acl_support())
    return(UNIXERROR(ERRDOS,ERRnoaccess));

  if(total_parameter_count < 8)
    return(ERROR(ERRDOS,ERRbadfunc));

  if((fsp = file_fsp(params,0)) == NULL)
    return(ERROR(ERRDOS,ERRbadfid));

  security_info_sent = IVAL(params,4);

  DEBUG(3,("call_nt_transact_set_security_desc: file = %s, sent 0x%x\n", fsp->fsp_name,
       (unsigned int)security_info_sent ));

  if (!set_sd( fsp, data, total_data_count, security_info_sent, &error_class, &error_code))
		return (ERROR(error_class, error_code));

  send_nt_replies(inbuf, outbuf, bufsize, 0, NULL, 0, NULL, 0);
  return -1;
}
   
/****************************************************************************
 Reply to IOCTL - not implemented - no plans.
****************************************************************************/
static int call_nt_transact_ioctl(connection_struct *conn,
				  char *inbuf, char *outbuf, int length,
                                  int bufsize, 
                                  char **ppsetup, char **ppparams, char **ppdata)
{
  static BOOL logged_message = False;

  if(!logged_message) {
    DEBUG(0,("call_nt_transact_ioctl: Currently not implemented.\n"));
    logged_message = True; /* Only print this once... */
  }
  return(ERROR(ERRSRV,ERRnosupport));
}
   
/****************************************************************************
 Reply to a SMBNTtrans.
****************************************************************************/
int reply_nttrans(connection_struct *conn,
		  char *inbuf,char *outbuf,int length,int bufsize)
{
  int  outsize = 0;
#if 0 /* Not used. */
  uint16 max_setup_count = CVAL(inbuf, smb_nt_MaxSetupCount);
  uint32 max_parameter_count = IVAL(inbuf, smb_nt_MaxParameterCount);
  uint32 max_data_count = IVAL(inbuf,smb_nt_MaxDataCount);
#endif /* Not used. */
  uint32 total_parameter_count = IVAL(inbuf, smb_nt_TotalParameterCount);
  uint32 total_data_count = IVAL(inbuf, smb_nt_TotalDataCount);
  uint32 parameter_count = IVAL(inbuf,smb_nt_ParameterCount);
  uint32 parameter_offset = IVAL(inbuf,smb_nt_ParameterOffset);
  uint32 data_count = IVAL(inbuf,smb_nt_DataCount);
  uint32 data_offset = IVAL(inbuf,smb_nt_DataOffset);
  uint16 setup_count = 2*CVAL(inbuf,smb_nt_SetupCount); /* setup count is in *words* */
  uint16 function_code = SVAL( inbuf, smb_nt_Function);
  char *params = NULL, *data = NULL, *setup = NULL;
  uint32 num_params_sofar, num_data_sofar;
  START_PROFILE(SMBnttrans);

  if(global_oplock_break && (function_code == NT_TRANSACT_CREATE)) {
    /*
     * Queue this open message as we are the process of an oplock break.
     */

    DEBUG(2,("reply_nttrans: queueing message NT_TRANSACT_CREATE \
due to being in oplock break state.\n" ));

    push_oplock_pending_smb_message( inbuf, length);
    END_PROFILE(SMBnttrans);
    return -1;
  }

  if (IS_IPC(conn) && (function_code != NT_TRANSACT_CREATE)) {
    END_PROFILE(SMBnttrans);
    return (ERROR(ERRSRV,ERRaccess));
  }

  outsize = set_message(outbuf,0,0,True);

  /* 
   * All nttrans messages we handle have smb_wct == 19 + setup_count.
   * Ensure this is so as a sanity check.
   */

  if(CVAL(inbuf, smb_wct) != 19 + (setup_count/2)) {
    DEBUG(2,("Invalid smb_wct %d in nttrans call (should be %d)\n",
          CVAL(inbuf, smb_wct), 19 + (setup_count/2)));
    END_PROFILE(SMBnttrans);
    return(ERROR(ERRSRV,ERRerror));
  }
    
  /* Allocate the space for the setup, the maximum needed parameters and data */

  if(setup_count > 0)
    setup = (char *)malloc(setup_count);
  if (total_parameter_count > 0)
    params = (char *)malloc(total_parameter_count);
  if (total_data_count > 0)
    data = (char *)malloc(total_data_count);
 
  if ((total_parameter_count && !params)  || (total_data_count && !data) ||
      (setup_count && !setup)) {
	safe_free(setup);
	safe_free(params);
	safe_free(data);
    DEBUG(0,("reply_nttrans : Out of memory\n"));
    END_PROFILE(SMBnttrans);
    return(ERROR(ERRDOS,ERRnomem));
  }

  /* Copy the param and data bytes sent with this request into
     the params buffer */
  num_params_sofar = parameter_count;
  num_data_sofar = data_count;

  if (parameter_count > total_parameter_count || data_count > total_data_count)
    exit_server("reply_nttrans: invalid sizes in packet.\n");

  if(setup) {
    memcpy( setup, &inbuf[smb_nt_SetupStart], setup_count);
    DEBUG(10,("reply_nttrans: setup_count = %d\n", setup_count));
    dump_data(10, setup, setup_count);
  }
  if(params) {
    memcpy( params, smb_base(inbuf) + parameter_offset, parameter_count);
    DEBUG(10,("reply_nttrans: parameter_count = %d\n", parameter_count));
    dump_data(10, params, parameter_count);
  }
  if(data) {
    memcpy( data, smb_base(inbuf) + data_offset, data_count);
    DEBUG(10,("reply_nttrans: data_count = %d\n",data_count));
    dump_data(10, data, data_count);
  }

  if(num_data_sofar < total_data_count || num_params_sofar < total_parameter_count) {
    /* We need to send an interim response then receive the rest
       of the parameter/data bytes */
    outsize = set_message(outbuf,0,0,True);
    send_smb(smbd_server_fd(),outbuf);

    while( num_data_sofar < total_data_count || num_params_sofar < total_parameter_count) {
      BOOL ret;

      ret = receive_next_smb(inbuf,bufsize,SMB_SECONDARY_WAIT);

      if((ret && (CVAL(inbuf, smb_com) != SMBnttranss)) || !ret) {
        outsize = set_message(outbuf,0,0,True);
        if(ret) {
		DEBUG(0,("reply_nttrans: Invalid secondary nttrans packet\n"));
        } else {
		DEBUG(0,("reply_nttrans: %s in getting secondary nttrans response.\n",
			 (smb_read_error == READ_ERROR) ? "error" : "timeout" ));
	}
        if(params)
          free(params);
        if(data)
          free(data);
        if(setup)
          free(setup);
	END_PROFILE(SMBnttrans);
        return(ERROR(ERRSRV,ERRerror));
      }
      
      /* Revise total_params and total_data in case they have changed downwards */
      total_parameter_count = IVAL(inbuf, smb_nts_TotalParameterCount);
      total_data_count = IVAL(inbuf, smb_nts_TotalDataCount);
      num_params_sofar += (parameter_count = IVAL(inbuf,smb_nts_ParameterCount));
      num_data_sofar += ( data_count = IVAL(inbuf, smb_nts_DataCount));
      if (num_params_sofar > total_parameter_count || num_data_sofar > total_data_count)
        exit_server("reply_nttrans2: data overflow in secondary nttrans packet\n");

      memcpy( &params[ IVAL(inbuf, smb_nts_ParameterDisplacement)], 
              smb_base(inbuf) + IVAL(inbuf, smb_nts_ParameterOffset), parameter_count);
      memcpy( &data[IVAL(inbuf, smb_nts_DataDisplacement)],
              smb_base(inbuf)+ IVAL(inbuf, smb_nts_DataOffset), data_count);
    }
  }

  if (Protocol >= PROTOCOL_NT1) {
    uint16 flg2 = SVAL(outbuf,smb_flg2);
    SSVAL(outbuf,smb_flg2,flg2 | 0x40); /* IS_LONG_NAME */
  }

  /* Now we must call the relevant NT_TRANS function */
  switch(function_code) {
    case NT_TRANSACT_CREATE:
      START_PROFILE_NESTED(NT_transact_create);
      outsize = call_nt_transact_create(conn, inbuf, outbuf, length, bufsize, 
                                        &setup, &params, &data);
      END_PROFILE_NESTED(NT_transact_create);
      break;
    case NT_TRANSACT_IOCTL:
      START_PROFILE_NESTED(NT_transact_ioctl);
      outsize = call_nt_transact_ioctl(conn, 
				       inbuf, outbuf, length, bufsize, 
                                       &setup, &params, &data);
      END_PROFILE_NESTED(NT_transact_ioctl);
      break;
    case NT_TRANSACT_SET_SECURITY_DESC:
      START_PROFILE_NESTED(NT_transact_set_security_desc);
      outsize = call_nt_transact_set_security_desc(conn, inbuf, outbuf, 
						   length, bufsize, 
                                                   &setup, &params, &data);
      END_PROFILE_NESTED(NT_transact_set_security_desc);
      break;
    case NT_TRANSACT_NOTIFY_CHANGE:
      START_PROFILE_NESTED(NT_transact_notify_change);
      outsize = call_nt_transact_notify_change(conn, inbuf, outbuf, 
					       length, bufsize, 
                                               &setup, &params, &data);
      END_PROFILE_NESTED(NT_transact_notify_change);
      break;
    case NT_TRANSACT_RENAME:
      START_PROFILE_NESTED(NT_transact_rename);
      outsize = call_nt_transact_rename(conn, inbuf, outbuf, length, 
					bufsize, 
                                        &setup, &params, &data);
      END_PROFILE_NESTED(NT_transact_rename);
      break;

    case NT_TRANSACT_QUERY_SECURITY_DESC:
      START_PROFILE_NESTED(NT_transact_query_security_desc);
      outsize = call_nt_transact_query_security_desc(conn, inbuf, outbuf, 
						     length, bufsize, 
                                                     &setup, &params, &data);
      END_PROFILE_NESTED(NT_transact_query_security_desc);
      break;
  default:
	  /* Error in request */
	  DEBUG(0,("reply_nttrans: Unknown request %d in nttrans call\n", function_code));
	  if(setup)
		  free(setup);
	  if(params)
		  free(params);
	  if(data)
		  free(data);
	  END_PROFILE(SMBnttrans);
	  return (ERROR(ERRSRV,ERRerror));
  }

  /* As we do not know how many data packets will need to be
     returned here the various call_nt_transact_xxxx calls
     must send their own. Thus a call_nt_transact_xxxx routine only
     returns a value other than -1 when it wants to send
     an error packet. 
  */

  if(setup)
    free(setup);
  if(params)
    free(params);
  if(data)
    free(data);
  END_PROFILE(SMBnttrans);
  return outsize; /* If a correct response was needed the call_nt_transact_xxxx 
		     calls have already sent it. If outsize != -1 then it is
		     returning an error packet. */
}
#undef OLD_NTDOMAIN