This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
/*
2002-01-30 09:08:46 +03:00
Unix SMB / CIFS implementation .
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
Password and authentication handling
2002-07-15 14:35:28 +04:00
Copyright ( C ) Andrew Bartlett 2002
Copyright ( C ) Jelmer Vernooij 2002
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
This program is free software ; you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation ; either version 2 of the License , or
( at your option ) any later version .
2002-07-15 14:35:28 +04:00
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
2002-07-15 14:35:28 +04:00
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
You should have received a copy of the GNU General Public License
along with this program ; if not , write to the Free Software
Foundation , Inc . , 675 Mass Ave , Cambridge , MA 0213 9 , USA .
*/
# include "includes.h"
2002-07-15 14:35:28 +04:00
# undef DBGC_CLASS
# define DBGC_CLASS DBGC_PASSDB
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
/** List of various built-in passdb modules */
2002-02-22 05:47:53 +03:00
const struct pdb_init_function_entry builtin_pdb_init_functions [ ] = {
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{ " smbpasswd " , pdb_init_smbpasswd } ,
{ " smbpasswd_nua " , pdb_init_smbpasswd_nua } ,
{ " tdbsam " , pdb_init_tdbsam } ,
{ " tdbsam_nua " , pdb_init_tdbsam_nua } ,
2002-03-02 13:16:28 +03:00
{ " ldapsam " , pdb_init_ldapsam } ,
{ " ldapsam_nua " , pdb_init_ldapsam_nua } ,
2002-07-15 14:35:28 +04:00
{ " unixsam " , pdb_init_unixsam } ,
2003-03-22 12:03:46 +03:00
{ " guest " , pdb_init_guestsam } ,
2002-09-25 19:19:00 +04:00
{ " nisplussam " , pdb_init_nisplussam } ,
2002-02-22 05:47:53 +03:00
{ " plugin " , pdb_init_plugin } ,
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{ NULL , NULL }
} ;
2002-09-26 22:58:34 +04:00
static NTSTATUS context_setsampwent ( struct pdb_context * context , BOOL update )
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{
2002-09-26 22:58:34 +04:00
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
2002-09-25 19:19:00 +04:00
if ( ! context ) {
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-07-15 14:35:28 +04:00
context - > pwent_methods = context - > pdb_methods ;
if ( ! context - > pwent_methods ) {
/* No passdbs at all */
2002-09-26 22:58:34 +04:00
return ret ;
2002-07-15 14:35:28 +04:00
}
2002-09-26 22:58:34 +04:00
while ( NT_STATUS_IS_ERR ( ret = context - > pwent_methods - > setsampwent ( context - > pwent_methods , update ) ) ) {
2002-07-15 14:35:28 +04:00
context - > pwent_methods = context - > pwent_methods - > next ;
if ( context - > pwent_methods = = NULL )
2002-09-26 22:58:34 +04:00
return NT_STATUS_UNSUCCESSFUL ;
2002-07-15 14:35:28 +04:00
}
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
static void context_endsampwent ( struct pdb_context * context )
{
2002-07-15 14:35:28 +04:00
if ( ( ! context ) ) {
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
return ;
}
2002-07-15 14:35:28 +04:00
if ( context - > pwent_methods & & context - > pwent_methods - > endsampwent )
context - > pwent_methods - > endsampwent ( context - > pwent_methods ) ;
/* So we won't get strange data when calling getsampwent now */
context - > pwent_methods = NULL ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-09-26 22:58:34 +04:00
static NTSTATUS context_getsampwent ( struct pdb_context * context , SAM_ACCOUNT * user )
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{
2002-09-26 22:58:34 +04:00
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
2002-07-15 14:35:28 +04:00
if ( ( ! context ) | | ( ! context - > pwent_methods ) ) {
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-07-15 14:35:28 +04:00
/* Loop until we find something useful */
2002-09-26 22:58:34 +04:00
while ( NT_STATUS_IS_ERR ( ret = context - > pwent_methods - > getsampwent ( context - > pwent_methods , user ) ) ) {
2002-07-15 14:35:28 +04:00
2002-09-26 22:58:34 +04:00
context - > pwent_methods - > endsampwent ( context - > pwent_methods ) ;
2002-07-15 14:35:28 +04:00
context - > pwent_methods = context - > pwent_methods - > next ;
/* All methods are checked now. There are no more entries */
if ( context - > pwent_methods = = NULL )
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
2002-07-15 14:35:28 +04:00
context - > pwent_methods - > setsampwent ( context - > pwent_methods , False ) ;
}
user - > methods = context - > pwent_methods ;
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-09-26 22:58:34 +04:00
static NTSTATUS context_getsampwnam ( struct pdb_context * context , SAM_ACCOUNT * sam_acct , const char * username )
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{
2002-09-26 22:58:34 +04:00
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
2002-07-15 14:35:28 +04:00
struct pdb_methods * curmethods ;
if ( ( ! context ) ) {
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-07-15 14:35:28 +04:00
curmethods = context - > pdb_methods ;
while ( curmethods ) {
2002-09-26 22:58:34 +04:00
if ( NT_STATUS_IS_OK ( ret = curmethods - > getsampwnam ( curmethods , sam_acct , username ) ) ) {
2002-07-15 14:35:28 +04:00
sam_acct - > methods = curmethods ;
2002-09-26 22:58:34 +04:00
return ret ;
2002-07-15 14:35:28 +04:00
}
curmethods = curmethods - > next ;
}
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-09-26 22:58:34 +04:00
static NTSTATUS context_getsampwsid ( struct pdb_context * context , SAM_ACCOUNT * sam_acct , const DOM_SID * sid )
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{
2002-09-26 22:58:34 +04:00
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
2002-07-15 14:35:28 +04:00
struct pdb_methods * curmethods ;
if ( ( ! context ) ) {
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-07-15 14:35:28 +04:00
curmethods = context - > pdb_methods ;
while ( curmethods ) {
2002-09-26 22:58:34 +04:00
if ( NT_STATUS_IS_OK ( ret = curmethods - > getsampwsid ( curmethods , sam_acct , sid ) ) ) {
2002-07-15 14:35:28 +04:00
sam_acct - > methods = curmethods ;
2002-09-26 22:58:34 +04:00
return ret ;
2002-07-15 14:35:28 +04:00
}
curmethods = curmethods - > next ;
}
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-09-26 22:58:34 +04:00
static NTSTATUS context_add_sam_account ( struct pdb_context * context , SAM_ACCOUNT * sam_acct )
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{
2002-09-26 22:58:34 +04:00
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
if ( ( ! context ) | | ( ! context - > pdb_methods ) ) {
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-07-15 14:35:28 +04:00
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
/** @todo This is where a 're-read on add' should be done */
2002-07-15 14:35:28 +04:00
/* We now add a new account to the first database listed.
* Should we ? */
return context - > pdb_methods - > add_sam_account ( context - > pdb_methods , sam_acct ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-09-26 22:58:34 +04:00
static NTSTATUS context_update_sam_account ( struct pdb_context * context , SAM_ACCOUNT * sam_acct )
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{
2002-09-26 22:58:34 +04:00
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
2002-07-15 14:35:28 +04:00
if ( ! context ) {
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-07-15 14:35:28 +04:00
if ( ! sam_acct | | ! sam_acct - > methods ) {
DEBUG ( 0 , ( " invalid sam_acct specified \n " ) ) ;
2002-09-26 22:58:34 +04:00
return ret ;
2002-07-15 14:35:28 +04:00
}
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
/** @todo This is where a 're-read on update' should be done */
2002-07-15 14:35:28 +04:00
return sam_acct - > methods - > update_sam_account ( sam_acct - > methods , sam_acct ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-09-26 22:58:34 +04:00
static NTSTATUS context_delete_sam_account ( struct pdb_context * context , SAM_ACCOUNT * sam_acct )
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{
2002-09-26 22:58:34 +04:00
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
2002-07-15 14:35:28 +04:00
struct pdb_methods * pdb_selected ;
if ( ! context ) {
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
2002-09-26 22:58:34 +04:00
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-07-15 14:35:28 +04:00
if ( ! sam_acct - > methods ) {
pdb_selected = context - > pdb_methods ;
/* There's no passdb backend specified for this account.
* Try to delete it in every passdb available
* Needed to delete accounts in smbpasswd that are not
* in / etc / passwd .
*/
while ( pdb_selected ) {
2002-09-26 22:58:34 +04:00
if ( NT_STATUS_IS_OK ( ret = pdb_selected - > delete_sam_account ( pdb_selected , sam_acct ) ) ) {
return ret ;
2002-07-15 14:35:28 +04:00
}
pdb_selected = pdb_selected - > next ;
}
2002-09-26 22:58:34 +04:00
return ret ;
2002-07-15 14:35:28 +04:00
}
if ( ! sam_acct - > methods - > delete_sam_account ) {
DEBUG ( 0 , ( " invalid sam_acct->methods->delete_sam_account \n " ) ) ;
2002-09-26 22:58:34 +04:00
return ret ;
2002-07-15 14:35:28 +04:00
}
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
2002-07-15 14:35:28 +04:00
return sam_acct - > methods - > delete_sam_account ( sam_acct - > methods , sam_acct ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-11-02 06:47:48 +03:00
static NTSTATUS context_getgrsid ( struct pdb_context * context ,
GROUP_MAP * map , DOM_SID sid , BOOL with_priv )
{
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
struct pdb_methods * curmethods ;
if ( ( ! context ) ) {
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
return ret ;
}
curmethods = context - > pdb_methods ;
while ( curmethods ) {
ret = curmethods - > getgrsid ( curmethods , map , sid , with_priv ) ;
if ( NT_STATUS_IS_OK ( ret ) ) {
map - > methods = curmethods ;
return ret ;
}
curmethods = curmethods - > next ;
}
return ret ;
}
static NTSTATUS context_getgrgid ( struct pdb_context * context ,
GROUP_MAP * map , gid_t gid , BOOL with_priv )
{
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
struct pdb_methods * curmethods ;
if ( ( ! context ) ) {
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
return ret ;
}
curmethods = context - > pdb_methods ;
while ( curmethods ) {
ret = curmethods - > getgrgid ( curmethods , map , gid , with_priv ) ;
if ( NT_STATUS_IS_OK ( ret ) ) {
map - > methods = curmethods ;
return ret ;
}
curmethods = curmethods - > next ;
}
return ret ;
}
static NTSTATUS context_getgrnam ( struct pdb_context * context ,
GROUP_MAP * map , char * name , BOOL with_priv )
{
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
struct pdb_methods * curmethods ;
if ( ( ! context ) ) {
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
return ret ;
}
curmethods = context - > pdb_methods ;
while ( curmethods ) {
ret = curmethods - > getgrnam ( curmethods , map , name , with_priv ) ;
if ( NT_STATUS_IS_OK ( ret ) ) {
map - > methods = curmethods ;
return ret ;
}
curmethods = curmethods - > next ;
}
return ret ;
}
static NTSTATUS context_add_group_mapping_entry ( struct pdb_context * context ,
GROUP_MAP * map )
{
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
if ( ( ! context ) | | ( ! context - > pdb_methods ) ) {
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
return ret ;
}
return context - > pdb_methods - > add_group_mapping_entry ( context - > pdb_methods ,
map ) ;
}
static NTSTATUS context_update_group_mapping_entry ( struct pdb_context * context ,
GROUP_MAP * map )
{
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
if ( ( ! context ) | | ( ! context - > pdb_methods ) ) {
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
return ret ;
}
return context - >
pdb_methods - > update_group_mapping_entry ( context - > pdb_methods , map ) ;
}
static NTSTATUS context_delete_group_mapping_entry ( struct pdb_context * context ,
DOM_SID sid )
{
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
if ( ( ! context ) | | ( ! context - > pdb_methods ) ) {
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
return ret ;
}
return context - >
pdb_methods - > delete_group_mapping_entry ( context - > pdb_methods , sid ) ;
}
static NTSTATUS context_enum_group_mapping ( struct pdb_context * context ,
enum SID_NAME_USE sid_name_use ,
GROUP_MAP * * rmap , int * num_entries ,
BOOL unix_only , BOOL with_priv )
{
NTSTATUS ret = NT_STATUS_UNSUCCESSFUL ;
if ( ( ! context ) | | ( ! context - > pdb_methods ) ) {
DEBUG ( 0 , ( " invalid pdb_context specified! \n " ) ) ;
return ret ;
}
return context - > pdb_methods - > enum_group_mapping ( context - > pdb_methods ,
sid_name_use , rmap ,
num_entries , unix_only ,
with_priv ) ;
}
2002-07-15 14:35:28 +04:00
/******************************************************************
Free and cleanup a pdb context , any associated data and anything
that the attached modules might have associated .
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2002-03-19 16:57:53 +03:00
static void free_pdb_context ( struct pdb_context * * context )
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{
2002-07-15 14:35:28 +04:00
struct pdb_methods * pdb_selected = ( * context ) - > pdb_methods ;
while ( pdb_selected ) {
2002-10-25 04:38:10 +04:00
if ( pdb_selected - > free_private_data )
pdb_selected - > free_private_data ( & ( pdb_selected - > private_data ) ) ;
2002-07-15 14:35:28 +04:00
pdb_selected = pdb_selected - > next ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
talloc_destroy ( ( * context ) - > mem_ctx ) ;
* context = NULL ;
}
/******************************************************************
2002-07-15 14:35:28 +04:00
Make a pdb_methods from scratch
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
static NTSTATUS make_pdb_methods_name ( struct pdb_methods * * methods , struct pdb_context * context , const char * selected )
{
char * module_name = smb_xstrdup ( selected ) ;
char * module_location = NULL , * p ;
NTSTATUS nt_status = NT_STATUS_UNSUCCESSFUL ;
int i ;
p = strchr ( module_name , ' : ' ) ;
if ( p ) {
* p = 0 ;
module_location = p + 1 ;
trim_string ( module_location , " " , " " ) ;
}
trim_string ( module_name , " " , " " ) ;
DEBUG ( 5 , ( " Attempting to find an passdb backend to match %s (%s) \n " , selected , module_name ) ) ;
for ( i = 0 ; builtin_pdb_init_functions [ i ] . name ; i + + )
{
if ( strequal ( builtin_pdb_init_functions [ i ] . name , module_name ) )
{
DEBUG ( 5 , ( " Found pdb backend %s (at pos %d) \n " , module_name , i ) ) ;
nt_status = builtin_pdb_init_functions [ i ] . init ( context , methods , module_location ) ;
if ( NT_STATUS_IS_OK ( nt_status ) ) {
DEBUG ( 5 , ( " pdb backend %s has a valid init \n " , selected ) ) ;
} else {
DEBUG ( 0 , ( " pdb backend %s did not correctly init (error was %s) \n " , selected , nt_errstr ( nt_status ) ) ) ;
}
SAFE_FREE ( module_name ) ;
return nt_status ;
break ; /* unreached */
}
}
/* No such backend found */
SAFE_FREE ( module_name ) ;
return NT_STATUS_INVALID_PARAMETER ;
}
/******************************************************************
Make a pdb_context from scratch .
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
static NTSTATUS make_pdb_context ( struct pdb_context * * context )
{
TALLOC_CTX * mem_ctx ;
2002-07-15 14:35:28 +04:00
2002-12-20 23:21:31 +03:00
mem_ctx = talloc_init ( " pdb_context internal allocation context " ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
if ( ! mem_ctx ) {
DEBUG ( 0 , ( " make_pdb_context: talloc init failed! \n " ) ) ;
return NT_STATUS_NO_MEMORY ;
}
* context = talloc ( mem_ctx , sizeof ( * * context ) ) ;
if ( ! * context ) {
DEBUG ( 0 , ( " make_pdb_context: talloc failed! \n " ) ) ;
return NT_STATUS_NO_MEMORY ;
}
ZERO_STRUCTP ( * context ) ;
( * context ) - > mem_ctx = mem_ctx ;
( * context ) - > pdb_setsampwent = context_setsampwent ;
( * context ) - > pdb_endsampwent = context_endsampwent ;
( * context ) - > pdb_getsampwent = context_getsampwent ;
( * context ) - > pdb_getsampwnam = context_getsampwnam ;
2002-07-15 14:35:28 +04:00
( * context ) - > pdb_getsampwsid = context_getsampwsid ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
( * context ) - > pdb_add_sam_account = context_add_sam_account ;
( * context ) - > pdb_update_sam_account = context_update_sam_account ;
( * context ) - > pdb_delete_sam_account = context_delete_sam_account ;
2002-11-02 06:47:48 +03:00
( * context ) - > pdb_getgrsid = context_getgrsid ;
( * context ) - > pdb_getgrgid = context_getgrgid ;
( * context ) - > pdb_getgrnam = context_getgrnam ;
( * context ) - > pdb_add_group_mapping_entry = context_add_group_mapping_entry ;
( * context ) - > pdb_update_group_mapping_entry = context_update_group_mapping_entry ;
( * context ) - > pdb_delete_group_mapping_entry = context_delete_group_mapping_entry ;
( * context ) - > pdb_enum_group_mapping = context_enum_group_mapping ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
( * context ) - > free_fn = free_pdb_context ;
2002-07-15 14:35:28 +04:00
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
return NT_STATUS_OK ;
}
/******************************************************************
2002-07-15 14:35:28 +04:00
Make a pdb_context , given an array of strings
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
2002-11-13 02:20:50 +03:00
NTSTATUS make_pdb_context_list ( struct pdb_context * * context , const char * * selected )
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{
2002-07-15 14:35:28 +04:00
int i = 0 ;
struct pdb_methods * curmethods , * tmpmethods ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
NTSTATUS nt_status = NT_STATUS_UNSUCCESSFUL ;
2002-01-25 14:44:15 +03:00
2002-07-15 14:35:28 +04:00
if ( ! NT_STATUS_IS_OK ( nt_status = make_pdb_context ( context ) ) ) {
return nt_status ;
2002-01-25 14:44:15 +03:00
}
2002-07-15 14:35:28 +04:00
while ( selected [ i ] ) {
/* Try to initialise pdb */
DEBUG ( 5 , ( " Trying to load: %s \n " , selected [ i ] ) ) ;
if ( ! NT_STATUS_IS_OK ( nt_status = make_pdb_methods_name ( & curmethods , * context , selected [ i ] ) ) ) {
DEBUG ( 1 , ( " Loading %s failed! \n " , selected [ i ] ) ) ;
free_pdb_context ( context ) ;
return nt_status ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-07-15 14:35:28 +04:00
curmethods - > parent = * context ;
DLIST_ADD_END ( ( * context ) - > pdb_methods , curmethods , tmpmethods ) ;
i + + ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-07-15 14:35:28 +04:00
return NT_STATUS_OK ;
}
2002-04-04 07:53:43 +04:00
2002-07-15 14:35:28 +04:00
/******************************************************************
Make a pdb_context , given a text string .
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2002-04-04 07:53:43 +04:00
2002-07-15 14:35:28 +04:00
NTSTATUS make_pdb_context_string ( struct pdb_context * * context , const char * selected )
{
NTSTATUS ret ;
2002-08-17 21:00:51 +04:00
char * * newsel = str_list_make ( selected , NULL ) ;
2002-11-13 02:20:50 +03:00
ret = make_pdb_context_list ( context , ( const char * * ) newsel ) ;
2002-07-15 14:35:28 +04:00
str_list_free ( & newsel ) ;
return ret ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
/******************************************************************
2002-04-04 07:53:43 +04:00
Return an already initialised pdb_context , to facilitate backward
compatibility ( see functions below ) .
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
static struct pdb_context * pdb_get_static_context ( BOOL reload )
{
static struct pdb_context * pdb_context = NULL ;
2002-07-15 14:35:28 +04:00
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
if ( ( pdb_context ) & & ( reload ) ) {
pdb_context - > free_fn ( & pdb_context ) ;
2002-09-26 22:58:34 +04:00
if ( NT_STATUS_IS_ERR ( make_pdb_context_list ( & pdb_context , lp_passdb_backend ( ) ) ) ) {
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
return NULL ;
}
}
2002-07-15 14:35:28 +04:00
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
if ( ! pdb_context ) {
2002-09-26 22:58:34 +04:00
if ( NT_STATUS_IS_ERR ( make_pdb_context_list ( & pdb_context , lp_passdb_backend ( ) ) ) ) {
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
return NULL ;
}
}
2002-07-15 14:35:28 +04:00
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
return pdb_context ;
}
/******************************************************************
2002-04-04 07:53:43 +04:00
Backward compatibility functions for the original passdb interface
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
BOOL pdb_setsampwent ( BOOL update )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
2002-09-26 22:58:34 +04:00
return NT_STATUS_IS_OK ( pdb_context - > pdb_setsampwent ( pdb_context , update ) ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
void pdb_endsampwent ( void )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return ;
}
pdb_context - > pdb_endsampwent ( pdb_context ) ;
}
BOOL pdb_getsampwent ( SAM_ACCOUNT * user )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
2002-09-26 22:58:34 +04:00
return NT_STATUS_IS_OK ( pdb_context - > pdb_getsampwent ( pdb_context , user ) ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
BOOL pdb_getsampwnam ( SAM_ACCOUNT * sam_acct , const char * username )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
2002-09-26 22:58:34 +04:00
return NT_STATUS_IS_OK ( pdb_context - > pdb_getsampwnam ( pdb_context , sam_acct , username ) ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-08-17 21:00:51 +04:00
BOOL pdb_getsampwsid ( SAM_ACCOUNT * sam_acct , const DOM_SID * sid )
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
2002-09-26 22:58:34 +04:00
return NT_STATUS_IS_OK ( pdb_context - > pdb_getsampwsid ( pdb_context , sam_acct , sid ) ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
BOOL pdb_add_sam_account ( SAM_ACCOUNT * sam_acct )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
2002-09-26 22:58:34 +04:00
return NT_STATUS_IS_OK ( pdb_context - > pdb_add_sam_account ( pdb_context , sam_acct ) ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
BOOL pdb_update_sam_account ( SAM_ACCOUNT * sam_acct )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
2002-09-26 22:58:34 +04:00
return NT_STATUS_IS_OK ( pdb_context - > pdb_update_sam_account ( pdb_context , sam_acct ) ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
BOOL pdb_delete_sam_account ( SAM_ACCOUNT * sam_acct )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
2002-07-15 14:35:28 +04:00
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
if ( ! pdb_context ) {
return False ;
}
2002-07-15 14:35:28 +04:00
2002-09-26 22:58:34 +04:00
return NT_STATUS_IS_OK ( pdb_context - > pdb_delete_sam_account ( pdb_context , sam_acct ) ) ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
}
2002-11-02 06:47:48 +03:00
BOOL pdb_getgrsid ( GROUP_MAP * map , DOM_SID sid , BOOL with_priv )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
return NT_STATUS_IS_OK ( pdb_context - >
pdb_getgrsid ( pdb_context , map , sid , with_priv ) ) ;
}
BOOL pdb_getgrgid ( GROUP_MAP * map , gid_t gid , BOOL with_priv )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
return NT_STATUS_IS_OK ( pdb_context - >
pdb_getgrgid ( pdb_context , map , gid , with_priv ) ) ;
}
BOOL pdb_getgrnam ( GROUP_MAP * map , char * name , BOOL with_priv )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
return NT_STATUS_IS_OK ( pdb_context - >
pdb_getgrnam ( pdb_context , map , name , with_priv ) ) ;
}
BOOL pdb_add_group_mapping_entry ( GROUP_MAP * map )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
return NT_STATUS_IS_OK ( pdb_context - >
pdb_add_group_mapping_entry ( pdb_context , map ) ) ;
}
BOOL pdb_update_group_mapping_entry ( GROUP_MAP * map )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
return NT_STATUS_IS_OK ( pdb_context - >
pdb_update_group_mapping_entry ( pdb_context , map ) ) ;
}
BOOL pdb_delete_group_mapping_entry ( DOM_SID sid )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
return NT_STATUS_IS_OK ( pdb_context - >
pdb_delete_group_mapping_entry ( pdb_context , sid ) ) ;
}
BOOL pdb_enum_group_mapping ( enum SID_NAME_USE sid_name_use , GROUP_MAP * * rmap ,
int * num_entries , BOOL unix_only , BOOL with_priv )
{
struct pdb_context * pdb_context = pdb_get_static_context ( False ) ;
if ( ! pdb_context ) {
return False ;
}
return NT_STATUS_IS_OK ( pdb_context - >
pdb_enum_group_mapping ( pdb_context , sid_name_use ,
rmap , num_entries , unix_only ,
with_priv ) ) ;
}
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
/***************************************************************
2002-07-15 14:35:28 +04:00
Initialize the static context ( at smbd startup etc ) .
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
2002-07-15 14:35:28 +04:00
If uninitialised , context will auto - init on first use .
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
BOOL initialize_password_db ( BOOL reload )
{
return ( pdb_get_static_context ( reload ) ! = NULL ) ;
}
2003-03-22 12:03:46 +03:00
/***************************************************************************
Default implementations of some functions .
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
static NTSTATUS pdb_default_getsampwnam ( struct pdb_methods * methods , SAM_ACCOUNT * user , const char * sname )
{
return NT_STATUS_NO_SUCH_USER ;
}
static NTSTATUS pdb_default_getsampwsid ( struct pdb_methods * my_methods , SAM_ACCOUNT * user , const DOM_SID * sid )
{
return NT_STATUS_NO_SUCH_USER ;
}
static NTSTATUS pdb_default_add_sam_account ( struct pdb_methods * methods , SAM_ACCOUNT * newpwd )
{
DEBUG ( 0 , ( " this backend (%s) should not be listed as the first passdb backend! You can't add users to it. \n " , methods - > name ) ) ;
return NT_STATUS_NOT_IMPLEMENTED ;
}
static NTSTATUS pdb_default_update_sam_account ( struct pdb_methods * methods , SAM_ACCOUNT * newpwd )
{
return NT_STATUS_NOT_IMPLEMENTED ;
}
static NTSTATUS pdb_default_delete_sam_account ( struct pdb_methods * methods , SAM_ACCOUNT * pwd )
{
return NT_STATUS_NOT_IMPLEMENTED ;
}
static NTSTATUS pdb_default_setsampwent ( struct pdb_methods * methods , BOOL update )
{
return NT_STATUS_NOT_IMPLEMENTED ;
}
static NTSTATUS pdb_default_getsampwent ( struct pdb_methods * methods , SAM_ACCOUNT * user )
{
return NT_STATUS_NOT_IMPLEMENTED ;
}
static void pdb_default_endsampwent ( struct pdb_methods * methods )
{
return ; /* NT_STATUS_NOT_IMPLEMENTED; */
}
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
NTSTATUS make_pdb_methods ( TALLOC_CTX * mem_ctx , PDB_METHODS * * methods )
{
* methods = talloc ( mem_ctx , sizeof ( struct pdb_methods ) ) ;
if ( ! * methods ) {
return NT_STATUS_NO_MEMORY ;
}
ZERO_STRUCTP ( * methods ) ;
2003-03-22 12:03:46 +03:00
( * methods ) - > setsampwent = pdb_default_setsampwent ;
( * methods ) - > endsampwent = pdb_default_endsampwent ;
( * methods ) - > getsampwent = pdb_default_getsampwent ;
( * methods ) - > getsampwnam = pdb_default_getsampwnam ;
( * methods ) - > getsampwsid = pdb_default_getsampwsid ;
( * methods ) - > add_sam_account = pdb_default_add_sam_account ;
( * methods ) - > update_sam_account = pdb_default_update_sam_account ;
( * methods ) - > delete_sam_account = pdb_default_delete_sam_account ;
( * methods ) - > getgrsid = pdb_default_getgrsid ;
( * methods ) - > getgrgid = pdb_default_getgrgid ;
( * methods ) - > getgrnam = pdb_default_getgrnam ;
( * methods ) - > add_group_mapping_entry = pdb_default_add_group_mapping_entry ;
( * methods ) - > update_group_mapping_entry = pdb_default_update_group_mapping_entry ;
( * methods ) - > delete_group_mapping_entry = pdb_default_delete_group_mapping_entry ;
( * methods ) - > enum_group_mapping = pdb_default_enum_group_mapping ;
This is another *BIG* change...
Samba now features a pluggable passdb interface, along the same lines as the
one in use in the auth subsystem. In this case, only one backend may be active
at a time by the 'normal' interface, and only one backend per passdb_context is
permitted outside that.
This pluggable interface is designed to allow any number of passdb backends to
be compiled in, with the selection at runtime. The 'passdb backend' paramater
has been created (and documented!) to support this.
As such, configure has been modfied to allow (for example) --with-ldap and the
old smbpasswd to be selected at the same time.
This patch also introduces two new backends: smbpasswd_nua and tdbsam_nua.
These two backends accept 'non unix accounts', where the user does *not* exist
in /etc/passwd. These accounts' don't have UIDs in the unix sense, but to
avoid conflicts in the algroitmic mapping of RIDs, they use the values
specified in the 'non unix account range' paramter - in the same way as the
winbind ranges are specifed.
While I was at it, I cleaned up some of the code in pdb_tdb (code copied
directly from smbpasswd and not really considered properly). Most of this was
to do with % macro expansion on stored data. It isn't easy to get the macros
into the tdb, and the first password change will 'expand' them. tdbsam needs
to use a similar system to pdb_ldap in this regard.
This patch only makes minor adjustments to pdb_nisplus and pdb_ldap, becouse I
don't have the test facilities for these. I plan to incoroprate at least
pdb_ldap into this scheme after consultation with Jerry.
Each (converted) passdb module now no longer has any 'static' variables, and
only exports 1 init function outside its .c file.
The non-unix-account support in this patch has been proven! It is now possible
to join a win2k machine to a Samba PDC without an account in /etc/passwd!
Other changes:
Minor interface adjustments:
pdb_delete_sam_account() now takes a SAM_ACCOUNT, not a char*.
pdb_update_sam_account() no longer takes the 'override' argument that was being
ignored so often (every other passdb backend). Extra checks have been added in
some places.
Minor code changes:
smbpasswd no longer attempts to initialise the passdb at startup, this is
now done on first use.
pdbedit has lost some of its 'machine account' logic, as this behaviour is now
controlled by the passdb subsystem directly.
The samr subsystem no longer calls 'local password change', but does the pdb
interactions directly. This allow the ACB_ flags specifed to be transferred
direct to the backend, without interference.
Doco:
I've updated the doco to reflect some of the changes, and removed some paramters
no longer applicable to HEAD.
(This used to be commit ff354c99c585068af6dc1ff35a1f109a806b326b)
2002-01-20 17:30:58 +03:00
return NT_STATUS_OK ;
}