samba-mirror/ctdb/config/events/legacy/10.interface.script

#!/bin/sh

#################################
# interface event script for ctdb
# this adds/removes IPs from your 
# public interface

[ -n "$CTDB_BASE" ] || \
    CTDB_BASE=$(d=$(dirname "$0") ; cd -P "$d" ; dirname "$PWD")

. "${CTDB_BASE}/functions"

load_script_options

ctdb_public_addresses="${CTDB_BASE}/public_addresses"

if [ ! -f "$ctdb_public_addresses" ]; then
	if [ "$1" = "init" ] ; then
		echo "No public addresses file found"
	fi
	exit 0
fi

# This sets $all_interfaces as a side-effect.
get_all_interfaces ()
{
    # Get all the interfaces listed in the public_addresses file
    all_interfaces=$(sed -e 's/^[^\t ]*[\t ]*//' \
			 -e 's/,/ /g' \
			 -e 's/[\t ]*$//' "$ctdb_public_addresses")

    # Get the interfaces for which CTDB has public IPs configured.
    # That is, for all but the 1st line, get the 1st field.
    ctdb_ifaces=$($CTDB -X ifaces | sed -e '1d' -e 's@^|@@' -e 's@|.*@@')

    # Add $ctdb_ifaces and make $all_interfaces unique
    # Use word splitting to squash whitespace
    # shellcheck disable=SC2086
    all_interfaces=$(echo $all_interfaces $ctdb_ifaces | tr ' ' '\n' | sort -u)
}

monitor_interfaces()
{
	get_all_interfaces

	down_interfaces_found=false
	up_interfaces_found=false

	# Note that this loop must not exit early.  It must process
	# all interfaces so that the correct state for each interface
	# is set in CTDB using setifacelink.
	for _iface in $all_interfaces ; do
		if interface_monitor "$_iface" ; then
			up_interfaces_found=true
			$CTDB setifacelink "$_iface" up >/dev/null 2>&1
		else
			down_interfaces_found=true
			$CTDB setifacelink "$_iface" down >/dev/null 2>&1
		fi
	done

	if ! $down_interfaces_found ; then
		return 0
	fi

	if ! $up_interfaces_found ; then
		return 1
	fi

	if [ "$CTDB_PARTIALLY_ONLINE_INTERFACES" != "yes" ]; then
		return 1
	fi

	return 0
}

# Sets: iface, ip, maskbits
get_iface_ip_maskbits ()
{
    _iface_in="$1"
    ip="$2"
    _maskbits_in="$3"

    # Intentional word splitting here
    # shellcheck disable=SC2046
    set -- $(ip_maskbits_iface "$ip")
    if [ -n "$1" ] ; then
	maskbits="$1"
	iface="$2"

	if [ "$iface" != "$_iface_in" ] ; then
	    printf \
		'WARNING: Public IP %s hosted on interface %s but VNN says %s\n' \
		"$ip" "$iface" "$_iface_in"
	fi
	if [ "$maskbits" != "$_maskbits_in" ] ; then
	    printf \
		'WARNING: Public IP %s has %s bit netmask but VNN says %s\n' \
		    "$ip" "$maskbits" "$_maskbits_in"
	fi
    else
	die "ERROR: Unable to determine interface for IP ${ip}"
    fi
}

ip_block ()
{
	_ip="$1"
	_iface="$2"

	case "$_ip" in
	*:*) _family="inet6" ;;
	*)   _family="inet"  ;;
	esac

	# Extra delete copes with previously killed script
	iptables_wrapper "$_family" \
			 -D INPUT -i "$_iface" -d "$_ip" -j DROP 2>/dev/null
	iptables_wrapper "$_family" \
			 -I INPUT -i "$_iface" -d "$_ip" -j DROP
}

ip_unblock ()
{
	_ip="$1"
	_iface="$2"

	case "$_ip" in
	*:*) _family="inet6" ;;
	*)   _family="inet"  ;;
	esac

	iptables_wrapper "$_family" \
			 -D INPUT -i "$_iface" -d "$_ip" -j DROP 2>/dev/null
}

ctdb_check_args "$@"

case "$1" in
init)
	# make sure that we only respond to ARP messages from the NIC where
	# a particular ip address is associated.
	get_proc sys/net/ipv4/conf/all/arp_filter >/dev/null 2>&1 && {
	    set_proc sys/net/ipv4/conf/all/arp_filter 1
	}

	_promote="sys/net/ipv4/conf/all/promote_secondaries"
	get_proc "$_promote" >/dev/null 2>&1 || \
	    die "Public IPs only supported if promote_secondaries is available"

	# make sure we drop any ips that might still be held if
	# previous instance of ctdb got killed with -9 or similar
	drop_all_public_ips
	;;

startup)
	monitor_interfaces
	;;

takeip)
	iface=$2
	ip=$3
	maskbits=$4

	add_ip_to_iface "$iface" "$ip" "$maskbits" || {
		exit 1;
	}

	# In case a previous "releaseip" for this IP was killed...
	ip_unblock "$ip" "$iface"

	flush_route_cache
	;;

releaseip)
	# releasing an IP is a bit more complex than it seems. Once the IP
	# is released, any open tcp connections to that IP on this host will end
	# up being stuck. Some of them (such as NFS connections) will be unkillable
	# so we need to use the killtcp ctdb function to kill them off. We also
	# need to make sure that no new connections get established while we are
	# doing this! So what we do is this:
	# 1) firewall this IP, so no new external packets arrive for it
	# 2) find existing connections, and kill them
	# 3) remove the IP from the interface
	# 4) remove the firewall rule
	shift
	get_iface_ip_maskbits "$@"

	ip_block "$ip" "$iface"

	kill_tcp_connections "$iface" "$ip"

	delete_ip_from_iface "$iface" "$ip" "$maskbits" || {
		ip_unblock "$ip" "$iface"
		exit 1
	}

	ip_unblock "$ip" "$iface"

	flush_route_cache
	;;

updateip)
	# moving an IP is a bit more complex than it seems.
	# First we drop all traffic on the old interface.
	# Then we try to add the ip to the new interface and before
	# we finally remove it from the old interface.
	#
	# 1) firewall this IP, so no new external packets arrive for it
	# 2) remove the IP from the old interface (and new interface, to be sure)
	# 3) add the IP to the new interface
	# 4) remove the firewall rule
	# 5) use ctdb gratarp to propagate the new mac address
	# 6) use netstat -tn to find existing connections, and tickle them
	_oiface=$2
	niface=$3
	_ip=$4
	_maskbits=$5

	get_iface_ip_maskbits "$_oiface" "$_ip" "$_maskbits"
	oiface="$iface"

	# Could check maskbits too.  However, that should never change
	# so we want to notice if it does.
	if [ "$oiface" = "$niface" ] ; then
		echo "Redundant \"updateip\" - ${ip} already on ${niface}"
		exit 0
	fi

	ip_block "$ip" "$oiface"

	delete_ip_from_iface "$oiface" "$ip" "$maskbits" 2>/dev/null
	delete_ip_from_iface "$niface" "$ip" "$maskbits" 2>/dev/null

	add_ip_to_iface "$niface" "$ip" "$maskbits" || {
		ip_unblock "$ip" "$oiface"
		exit 1
	}

	ip_unblock "$ip" "$oiface"

	flush_route_cache

	# propagate the new mac address
	$CTDB gratarp "$ip" "$niface"

	# tickle all existing connections, so that dropped packets
	# are retransmited and the tcp streams work
	tickle_tcp_connections "$ip"
	;;

monitor)
	monitor_interfaces || exit 1
	;;
esac

exit 0