2003-12-11 01:21:04 +03:00
/*
Unix SMB / CIFS implementation .
server side dcerpc defines
2005-01-11 19:53:02 +03:00
Copyright ( C ) Andrew Tridgell 2003 - 2005
Copyright ( C ) Stefan ( metze ) Metzmacher 2004 - 2005
2003-12-11 01:21:04 +03:00
This program is free software ; you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation ; either version 2 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program ; if not , write to the Free Software
Foundation , Inc . , 675 Mass Ave , Cambridge , MA 0213 9 , USA .
*/
2004-02-02 16:28:29 +03:00
# ifndef SAMBA_DCERPC_SERVER_H
# define SAMBA_DCERPC_SERVER_H
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* modules can use the following to determine if the interface has changed
* please increment the version number after each interface change
* with a comment and maybe update struct dcesrv_critical_sizes .
*/
/* version 1 - initial version - metze */
# define DCERPC_MODULE_VERSION 1
2003-12-11 01:21:04 +03:00
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
struct dcesrv_connection ;
struct dcesrv_call_state ;
2004-06-04 13:46:46 +04:00
struct dcesrv_auth ;
2003-12-12 06:59:09 +03:00
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
struct dcesrv_interface {
2004-12-20 17:37:54 +03:00
const char * name ;
const char * uuid ;
uint32_t if_version ;
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* this function is called when the client binds to this interface */
NTSTATUS ( * bind ) ( struct dcesrv_call_state * , const struct dcesrv_interface * ) ;
/* this function is called when the client disconnects the endpoint */
2005-01-10 15:15:26 +03:00
void ( * unbind ) ( struct dcesrv_connection_context * , const struct dcesrv_interface * ) ;
2004-12-20 17:37:54 +03:00
/* the ndr_pull function for the chosen interface.
*/
2005-02-18 02:11:26 +03:00
NTSTATUS ( * ndr_pull ) ( struct dcesrv_call_state * , TALLOC_CTX * , struct ndr_pull * , void * * ) ;
2004-12-20 17:37:54 +03:00
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* the dispatch function for the chosen interface.
*/
2004-12-20 17:37:54 +03:00
NTSTATUS ( * dispatch ) ( struct dcesrv_call_state * , TALLOC_CTX * , void * ) ;
2005-01-11 19:53:02 +03:00
/* the reply function for the chosen interface.
*/
NTSTATUS ( * reply ) ( struct dcesrv_call_state * , TALLOC_CTX * , void * ) ;
2004-12-20 17:37:54 +03:00
/* the ndr_push function for the chosen interface.
*/
2005-06-24 05:18:56 +04:00
NTSTATUS ( * ndr_push ) ( struct dcesrv_call_state * , TALLOC_CTX * , struct ndr_push * , const void * ) ;
2004-12-20 17:37:54 +03:00
/* for any private use by the interface code */
const void * private ;
} ;
2003-12-12 06:59:09 +03:00
/* the state of an ongoing dcerpc call */
struct dcesrv_call_state {
struct dcesrv_call_state * next , * prev ;
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
struct dcesrv_connection * conn ;
2005-01-10 15:15:26 +03:00
struct dcesrv_connection_context * context ;
2005-06-06 03:05:37 +04:00
struct ncacn_packet pkt ;
2003-12-12 08:30:00 +03:00
2005-01-11 19:53:02 +03:00
/* the backend can mark the call
* with DCESRV_CALL_STATE_FLAG_ASYNC
* that will cause the frontend to not touch r - > out
* and skip the reply
*
* this is only allowed to the backend when DCESRV_CALL_STATE_FLAG_MAY_ASYNC
* is alerady set by the frontend
*
* the backend then needs to call dcesrv_reply ( ) when it ' s
* ready to send the reply
*/
# define DCESRV_CALL_STATE_FLAG_ASYNC (1<<0)
# define DCESRV_CALL_STATE_FLAG_MAY_ASYNC (1<<1)
uint32_t state_flags ;
/* the time the request arrived in the server */
struct timeval time ;
/* the backend can use this event context for async replies */
struct event_context * event_ctx ;
/* this is the pointer to the allocated function struct */
void * r ;
/* that's the ndr push context used in dcesrv_request */
struct ndr_pull * ndr_pull ;
2003-12-13 14:44:28 +03:00
DATA_BLOB input ;
2005-09-08 15:26:05 +04:00
struct data_blob_list_item * replies ;
2004-05-04 10:07:52 +04:00
/* this is used by the boilerplate code to generate DCERPC faults */
2004-05-25 20:24:13 +04:00
uint32_t fault_code ;
2003-12-12 06:59:09 +03:00
} ;
2003-12-11 01:21:04 +03:00
2004-04-27 11:12:10 +04:00
# define DCESRV_HANDLE_ANY 255
2003-12-13 05:20:40 +03:00
/* a dcerpc handle in internal format */
struct dcesrv_handle {
struct dcesrv_handle * next , * prev ;
2005-01-10 15:15:26 +03:00
struct dcesrv_connection_context * context ;
2003-12-13 05:20:40 +03:00
struct policy_handle wire_handle ;
void * data ;
} ;
2003-12-14 04:09:10 +03:00
/* hold the authentication state information */
struct dcesrv_auth {
struct dcerpc_auth * auth_info ;
r1294: A nice, large, commit...
This implements gensec for Samba's server side, and brings gensec up
to the standards of a full subsystem.
This means that use of the subsystem is by gensec_* functions, not
function pointers in structures (this is internal). This causes
changes in all the existing gensec users.
Our RPC server no longer contains it's own generalised security
scheme, and now calls gensec directly.
Gensec has also taken over the role of auth/auth_ntlmssp.c
An important part of gensec, is the output of the 'session_info'
struct. This is now reference counted, so that we can correctly free
it when a pipe is closed, no matter if it was inherited, or created by
per-pipe authentication.
The schannel code is reworked, to be in the same file for client and
server.
ntlm_auth is reworked to use gensec.
The major problem with this code is the way it relies on subsystem
auto-initialisation. The primary reason for this commit now.is to
allow these problems to be looked at, and fixed.
There are problems with the new code:
- I've tested it with smbtorture, but currently don't have VMware and
valgrind working (this I'll fix soon).
- The SPNEGO code is client-only at this point.
- We still do not do kerberos.
Andrew Bartlett
(This used to be commit 07fd885fd488fd1051eacc905a2d4962f8a018ec)
2004-06-29 13:40:10 +04:00
struct gensec_security * gensec_security ;
2004-06-08 01:34:32 +04:00
struct auth_session_info * session_info ;
2004-09-12 07:18:24 +04:00
NTSTATUS ( * session_key ) ( struct dcesrv_connection * , DATA_BLOB * session_key ) ;
2003-12-14 04:09:10 +03:00
} ;
2005-01-10 15:15:26 +03:00
struct dcesrv_connection_context {
struct dcesrv_connection_context * next , * prev ;
uint32_t context_id ;
/* the connection this is on */
struct dcesrv_connection * conn ;
/* the ndr function table for the chosen interface */
const struct dcesrv_interface * iface ;
/* private data for the interface implementation */
void * private ;
/* current rpc handles - this is really the wrong scope for
them , but it will do for now */
struct dcesrv_handle * handles ;
} ;
2003-12-14 04:09:10 +03:00
2003-12-11 01:21:04 +03:00
/* the state associated with a dcerpc server connection */
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
struct dcesrv_connection {
2003-12-13 05:20:40 +03:00
/* the top level context for this server */
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
struct dcesrv_context * dce_ctx ;
2003-12-13 05:20:40 +03:00
2003-12-11 01:21:04 +03:00
/* the endpoint that was opened */
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
const struct dcesrv_endpoint * endpoint ;
2003-12-11 01:21:04 +03:00
2005-01-10 15:15:26 +03:00
/* a list of established context_ids */
struct dcesrv_connection_context * contexts ;
2003-12-12 06:59:09 +03:00
/* the state of the current calls */
struct dcesrv_call_state * call_list ;
2005-01-11 19:53:02 +03:00
/* the state of the async pending calls */
struct dcesrv_call_state * pending_call_list ;
2003-12-12 08:30:00 +03:00
/* the maximum size the client wants to receive */
2004-05-25 20:24:13 +04:00
uint32_t cli_max_recv_frag ;
2003-12-12 08:30:00 +03:00
2003-12-13 14:44:28 +03:00
DATA_BLOB partial_input ;
2003-12-14 04:09:10 +03:00
/* the current authentication state */
struct dcesrv_auth auth_state ;
2004-07-14 01:04:56 +04:00
2005-01-30 03:54:57 +03:00
struct stream_connection * srv_conn ;
2004-09-11 16:32:05 +04:00
/* the transport level session key */
DATA_BLOB transport_session_key ;
2005-06-21 10:03:11 +04:00
BOOL processing ;
2003-12-11 01:21:04 +03:00
} ;
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
struct dcesrv_endpoint_server {
/* this is the name of the endpoint server */
const char * name ;
2003-12-13 05:20:40 +03:00
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* this function should register endpoints and some other setup stuff,
* it is called when the dcesrv_context gets initialized .
*/
NTSTATUS ( * init_server ) ( struct dcesrv_context * , const struct dcesrv_endpoint_server * ) ;
/* this function can be used by other endpoint servers to
* ask for a dcesrv_interface implementation
2004-10-21 21:40:55 +04:00
* - iface must be reference to an already existing struct !
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
*/
2004-05-25 20:24:13 +04:00
BOOL ( * interface_by_uuid ) ( struct dcesrv_interface * iface , const char * , uint32_t ) ;
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* this function can be used by other endpoint servers to
* ask for a dcesrv_interface implementation
2004-10-21 21:40:55 +04:00
* - iface must be reference to an already existeng struct !
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
*/
BOOL ( * interface_by_name ) ( struct dcesrv_interface * iface , const char * ) ;
2003-12-11 01:21:04 +03:00
} ;
/* server-wide context information for the dcerpc server */
struct dcesrv_context {
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* the list of endpoints that have registered
* by the configured endpoint servers
*/
struct dcesrv_endpoint {
struct dcesrv_endpoint * next , * prev ;
/* the type and location of the endpoint */
r5902: A rather large change...
I wanted to add a simple 'workstation' argument to the DCERPC
authenticated binding calls, but this patch kind of grew from there.
With SCHANNEL, the 'workstation' name (the netbios name of the client)
matters, as this is what ties the session between the NETLOGON ops and
the SCHANNEL bind. This changes a lot of files, and these will again
be changed when jelmer does the credentials work.
I also correct some schannel IDL to distinguish between workstation
names and account names. The distinction matters for domain trust
accounts.
Issues in handling this (issues with lifetime of talloc pointers)
caused me to change the 'creds_CredentialsState' and 'struct
dcerpc_binding' pointers to always be talloc()ed pointers.
In the schannel DB, we now store both the domain and computername, and
query on both. This should ensure we fault correctly when the domain
is specified incorrectly in the SCHANNEL bind.
In the RPC-SCHANNEL test, I finally fixed a bug that vl pointed out,
where the comment claimed we re-used a connection, but in fact we made
a new connection.
This was achived by breaking apart some of the
dcerpc_secondary_connection() logic.
The addition of workstation handling was also propogated to NTLMSSP
and GENSEC, for completeness.
The RPC-SAMSYNC test has been cleaned up a little, using a loop over
usernames/passwords rather than manually expanded tests. This will be
expanded further (the code in #if 0 in this patch) to use a newly
created user account for testing.
In making this test pass test_rpc.sh, I found a bug in the RPC-ECHO
server, caused by the removal of [ref] and the assoicated pointer from
the IDL. This has been re-added, until the underlying pidl issues are
solved.
(This used to be commit 824289dcc20908ddec957a4a892a103eec2da9b9)
2005-03-19 11:34:43 +03:00
struct dcerpc_binding * ep_description ;
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* the security descriptor for smb named pipes */
struct security_descriptor * sd ;
/* the list of interfaces available on this endpoint */
struct dcesrv_if_list {
struct dcesrv_if_list * next , * prev ;
struct dcesrv_interface iface ;
} * interface_list ;
2003-12-11 01:21:04 +03:00
} * endpoint_list ;
2005-01-11 19:53:02 +03:00
/* this is the default state_flags for dcesrv_call_state structs */
uint32_t state_flags ;
2003-12-11 01:21:04 +03:00
} ;
This patch adds a better dcerpc server infastructure.
1.) We now register endpoint servers add startup via register_backend()
and later use the smb.conf 'dcerpc endpoint servers' parameter to setup the dcesrv_context
2.) each endpoint server can register at context creation time as much interfaces as it wants
(multiple interfaces on one endpoint are supported!)
(NOTE: there's a difference between 'endpoint server' and 'endpoint'!
for details look at rpc_server/dcesrv_server.h)
3.) one endpoint can have a security descriptor registered to it self
this will be checked in the future when a client wants to connect
to an smb pipe endpoint.
4.) we now have a 'remote' endpoint server, which works like the ntvfs_cifs module
it takes this options in the [globals] section:
dcerpc remote:interfaces = srvsvc, winreg, w32time, epmapper
dcerpc remote:binding = ...
dcerpc remote:user = ...
dcerpc remote:password = ...
5.) we currently have tree endpoint servers: epmapper, rpcecho and remote
the default for the 'dcerpc endpiont servers = epmapper, rpcecho'
for testing you can also do
dcerpc endpoint servers = rpcecho, remote, epmapper
dcerpc remote:interfaces = srvsvc, samr, netlogon
6,) please notice the the epmapper now only returns NO_ENTRIES
(but I think we'll find a solution for this too:-)
7.) also there're some other stuff left, but step by step :-)
This patch also includes updates for the
register_subsystem() , ntvfs_init(), and some other funtions
to check for duplicate subsystem registration
metze
(hmmm, my first large commit...I hope it works as supposed :-)
(This used to be commit 917e45dafd5be4c2cd90ff425b8d6f8403122349)
2004-01-09 01:55:27 +03:00
/* this structure is used by modules to determine the size of some critical types */
struct dcesrv_critical_sizes {
int interface_version ;
int sizeof_dcesrv_context ;
int sizeof_dcesrv_endpoint ;
int sizeof_dcesrv_endpoint_server ;
int sizeof_dcesrv_interface ;
int sizeof_dcesrv_if_list ;
int sizeof_dcesrv_connection ;
int sizeof_dcesrv_call_state ;
int sizeof_dcesrv_auth ;
int sizeof_dcesrv_handle ;
} ;
2004-02-02 16:28:29 +03:00
# endif /* SAMBA_DCERPC_SERVER_H */