2003-03-10 05:14:35 +03:00
/*
* Unix SMB / CIFS implementation .
* Version 3.0
* NTLMSSP Signing routines
* Copyright ( C ) Luke Kenneth Casson Leighton 1996 - 2001
* Copyright ( C ) Andrew Bartlett 2003
*
* This program is free software ; you can redistribute it and / or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation ; either version 2 of the License , or
* ( at your option ) any later version .
*
* This program is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
* GNU General Public License for more details .
*
* You should have received a copy of the GNU General Public License
* along with this program ; if not , write to the Free Software Foundation ,
* Inc . , 59 Temple Place - Suite 330 , Boston , MA 02111 - 1307 , USA .
*/
# include "includes.h"
# define CLI_SIGN "session key to client-to-server signing key magic constant"
# define CLI_SEAL "session key to client-to-server sealing key magic constant"
# define SRV_SIGN "session key to server-to-client signing key magic constant"
# define SRV_SEAL "session key to server-to-client sealing key magic constant"
static void NTLMSSPcalc_ap ( unsigned char * hash , unsigned char * data , int len )
{
unsigned char index_i = hash [ 256 ] ;
unsigned char index_j = hash [ 257 ] ;
int ind ;
for ( ind = 0 ; ind < len ; ind + + )
{
unsigned char tc ;
unsigned char t ;
index_i + + ;
index_j + = hash [ index_i ] ;
tc = hash [ index_i ] ;
hash [ index_i ] = hash [ index_j ] ;
hash [ index_j ] = tc ;
t = hash [ index_i ] + hash [ index_j ] ;
data [ ind ] = data [ ind ] ^ hash [ t ] ;
}
hash [ 256 ] = index_i ;
hash [ 257 ] = index_j ;
}
2005-02-17 18:32:19 +03:00
static void calc_hash ( unsigned char hash [ 258 ] , unsigned char * k2 , int k2l )
2003-03-10 05:14:35 +03:00
{
unsigned char j = 0 ;
int ind ;
for ( ind = 0 ; ind < 256 ; ind + + )
{
hash [ ind ] = ( unsigned char ) ind ;
}
for ( ind = 0 ; ind < 256 ; ind + + )
{
unsigned char tc ;
j + = ( hash [ ind ] + k2 [ ind % k2l ] ) ;
tc = hash [ ind ] ;
hash [ ind ] = hash [ j ] ;
hash [ j ] = tc ;
}
hash [ 256 ] = 0 ;
hash [ 257 ] = 0 ;
}
2004-01-05 03:11:35 +03:00
static void calc_ntlmv2_hash ( unsigned char hash [ 258 ] , unsigned char digest [ 16 ] ,
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
DATA_BLOB session_key ,
2003-03-10 05:14:35 +03:00
const char * constant )
{
struct MD5Context ctx3 ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
/* NOTE: This code is currently complate fantasy - it's
got more in common with reality than the previous code
( the LM session key is not the right thing to use ) but
it still needs work */
2003-03-10 05:14:35 +03:00
MD5Init ( & ctx3 ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
MD5Update ( & ctx3 , session_key . data , session_key . length ) ;
2004-01-05 03:11:35 +03:00
MD5Update ( & ctx3 , ( const unsigned char * ) constant , strlen ( constant ) + 1 ) ;
MD5Final ( digest , & ctx3 ) ;
2003-03-10 05:14:35 +03:00
calc_hash ( hash , digest , 16 ) ;
}
2003-04-21 17:00:39 +04:00
enum ntlmssp_direction {
NTLMSSP_SEND ,
NTLMSSP_RECEIVE
} ;
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
static NTSTATUS ntlmssp_make_packet_signature ( NTLMSSP_STATE * ntlmssp_state ,
2003-03-10 05:14:35 +03:00
const uchar * data , size_t length ,
2003-04-21 17:00:39 +04:00
enum ntlmssp_direction direction ,
2003-03-10 05:14:35 +03:00
DATA_BLOB * sig )
{
if ( ntlmssp_state - > neg_flags & NTLMSSP_NEGOTIATE_NTLM2 ) {
HMACMD5Context ctx ;
2004-01-05 03:11:35 +03:00
uchar seq_num [ 4 ] ;
2003-03-10 05:14:35 +03:00
uchar digest [ 16 ] ;
2003-03-22 13:53:20 +03:00
SIVAL ( seq_num , 0 , ntlmssp_state - > ntlmssp_seq_num ) ;
2003-03-10 05:14:35 +03:00
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
hmac_md5_init_limK_to_64 ( ( const unsigned char * ) ( ntlmssp_state - > send_sign_const ) , 16 , & ctx ) ;
2004-01-05 03:11:35 +03:00
hmac_md5_update ( seq_num , 4 , & ctx ) ;
2003-03-10 05:14:35 +03:00
hmac_md5_update ( data , length , & ctx ) ;
hmac_md5_final ( digest , & ctx ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
if ( ! msrpc_gen ( sig , " dBd " , NTLMSSP_SIGN_VERSION , digest , 8 /* only copy first 8 bytes */
, ntlmssp_state - > ntlmssp_seq_num ) ) {
2003-03-10 05:14:35 +03:00
return NT_STATUS_NO_MEMORY ;
}
2004-01-05 03:11:35 +03:00
if ( ntlmssp_state - > neg_flags & NTLMSSP_NEGOTIATE_KEY_EXCH ) {
switch ( direction ) {
case NTLMSSP_SEND :
NTLMSSPcalc_ap ( ntlmssp_state - > send_sign_hash , sig - > data + 4 , sig - > length - 4 ) ;
break ;
case NTLMSSP_RECEIVE :
NTLMSSPcalc_ap ( ntlmssp_state - > recv_sign_hash , sig - > data + 4 , sig - > length - 4 ) ;
break ;
}
2003-04-21 17:00:39 +04:00
}
2003-03-10 05:14:35 +03:00
} else {
uint32 crc ;
2003-08-15 05:42:30 +04:00
crc = crc32_calc_buffer ( ( const char * ) data , length ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
if ( ! msrpc_gen ( sig , " dddd " , NTLMSSP_SIGN_VERSION , 0 , crc , ntlmssp_state - > ntlmssp_seq_num ) ) {
2003-03-10 05:14:35 +03:00
return NT_STATUS_NO_MEMORY ;
}
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
dump_data_pw ( " ntlmssp hash: \n " , ntlmssp_state - > ntlmssp_hash ,
sizeof ( ntlmssp_state - > ntlmssp_hash ) ) ;
NTLMSSPcalc_ap ( ntlmssp_state - > ntlmssp_hash , sig - > data + 4 , sig - > length - 4 ) ;
2003-03-10 05:14:35 +03:00
}
return NT_STATUS_OK ;
}
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
NTSTATUS ntlmssp_sign_packet ( NTLMSSP_STATE * ntlmssp_state ,
const uchar * data , size_t length ,
DATA_BLOB * sig )
2003-03-10 05:14:35 +03:00
{
2004-01-05 03:11:35 +03:00
NTSTATUS nt_status ;
if ( ! ntlmssp_state - > session_key . length ) {
DEBUG ( 3 , ( " NO session key, cannot check sign packet \n " ) ) ;
return NT_STATUS_NO_USER_SESSION_KEY ;
}
nt_status = ntlmssp_make_packet_signature ( ntlmssp_state , data , length , NTLMSSP_SEND , sig ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
/* increment counter on send */
2003-03-10 05:14:35 +03:00
ntlmssp_state - > ntlmssp_seq_num + + ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
return nt_status ;
2003-03-10 05:14:35 +03:00
}
/**
* Check the signature of an incoming packet
* @ note caller * must * check that the signature is the size it expects
*
*/
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
NTSTATUS ntlmssp_check_packet ( NTLMSSP_STATE * ntlmssp_state ,
const uchar * data , size_t length ,
const DATA_BLOB * sig )
2003-03-10 05:14:35 +03:00
{
DATA_BLOB local_sig ;
NTSTATUS nt_status ;
2004-01-05 03:11:35 +03:00
if ( ! ntlmssp_state - > session_key . length ) {
DEBUG ( 3 , ( " NO session key, cannot check packet signature \n " ) ) ;
return NT_STATUS_NO_USER_SESSION_KEY ;
}
2003-03-10 05:14:35 +03:00
if ( sig - > length < 8 ) {
2003-11-03 17:34:25 +03:00
DEBUG ( 0 , ( " NTLMSSP packet check failed due to short signature (%lu bytes)! \n " ,
( unsigned long ) sig - > length ) ) ;
2003-03-10 05:14:35 +03:00
}
2003-07-16 09:51:10 +04:00
nt_status = ntlmssp_make_packet_signature ( ntlmssp_state , data ,
2003-04-21 17:00:39 +04:00
length , NTLMSSP_RECEIVE , & local_sig ) ;
2003-03-10 05:14:35 +03:00
if ( ! NT_STATUS_IS_OK ( nt_status ) ) {
DEBUG ( 0 , ( " NTLMSSP packet check failed with %s \n " , nt_errstr ( nt_status ) ) ) ;
return nt_status ;
}
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
if ( memcmp ( sig - > data + sig - > length - 8 , local_sig . data + local_sig . length - 8 , 8 ) ! = 0 ) {
2003-04-21 17:00:39 +04:00
DEBUG ( 5 , ( " BAD SIG: wanted signature of \n " ) ) ;
2003-08-15 05:42:30 +04:00
dump_data ( 5 , ( const char * ) local_sig . data , local_sig . length ) ;
2003-04-21 17:00:39 +04:00
DEBUG ( 5 , ( " BAD SIG: got signature of \n " ) ) ;
2003-08-15 05:42:30 +04:00
dump_data ( 5 , ( const char * ) ( sig - > data ) , sig - > length ) ;
2003-04-21 17:00:39 +04:00
2003-07-16 09:51:10 +04:00
DEBUG ( 0 , ( " NTLMSSP packet check failed due to invalid signature! \n " ) ) ;
2003-03-10 05:14:35 +03:00
return NT_STATUS_ACCESS_DENIED ;
}
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
/* increment counter on recieive */
ntlmssp_state - > ntlmssp_seq_num + + ;
return NT_STATUS_OK ;
}
/**
* Seal data with the NTLMSSP algorithm
*
*/
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
NTSTATUS ntlmssp_seal_packet ( NTLMSSP_STATE * ntlmssp_state ,
uchar * data , size_t length ,
DATA_BLOB * sig )
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
{
2004-01-05 03:11:35 +03:00
if ( ! ntlmssp_state - > session_key . length ) {
DEBUG ( 3 , ( " NO session key, cannot seal packet \n " ) ) ;
return NT_STATUS_NO_USER_SESSION_KEY ;
}
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
DEBUG ( 10 , ( " ntlmssp_seal_data: seal \n " ) ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
dump_data_pw ( " ntlmssp clear data \n " , data , length ) ;
if ( ntlmssp_state - > neg_flags & NTLMSSP_NEGOTIATE_NTLM2 ) {
HMACMD5Context ctx ;
char seq_num [ 4 ] ;
uchar digest [ 16 ] ;
SIVAL ( seq_num , 0 , ntlmssp_state - > ntlmssp_seq_num ) ;
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
hmac_md5_init_limK_to_64 ( ( const unsigned char * ) ( ntlmssp_state - > send_sign_const ) , 16 , & ctx ) ;
2003-08-15 05:42:30 +04:00
hmac_md5_update ( ( const unsigned char * ) seq_num , 4 , & ctx ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
hmac_md5_update ( data , length , & ctx ) ;
hmac_md5_final ( digest , & ctx ) ;
if ( ! msrpc_gen ( sig , " dBd " , NTLMSSP_SIGN_VERSION , digest , 8 /* only copy first 8 bytes */
, ntlmssp_state - > ntlmssp_seq_num ) ) {
return NT_STATUS_NO_MEMORY ;
}
dump_data_pw ( " ntlmssp client sealing hash: \n " ,
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
ntlmssp_state - > send_seal_hash ,
sizeof ( ntlmssp_state - > send_seal_hash ) ) ;
NTLMSSPcalc_ap ( ntlmssp_state - > send_seal_hash , data , length ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
dump_data_pw ( " ntlmssp client signing hash: \n " ,
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
ntlmssp_state - > send_sign_hash ,
sizeof ( ntlmssp_state - > send_sign_hash ) ) ;
NTLMSSPcalc_ap ( ntlmssp_state - > send_sign_hash , sig - > data + 4 , sig - > length - 4 ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
} else {
uint32 crc ;
2003-08-15 05:42:30 +04:00
crc = crc32_calc_buffer ( ( const char * ) data , length ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
if ( ! msrpc_gen ( sig , " dddd " , NTLMSSP_SIGN_VERSION , 0 , crc , ntlmssp_state - > ntlmssp_seq_num ) ) {
return NT_STATUS_NO_MEMORY ;
}
/* The order of these two operations matters - we must first seal the packet,
then seal the sequence number - this is becouse the ntlmssp_hash is not
constant , but is is rather updated with each iteration */
dump_data_pw ( " ntlmssp hash: \n " , ntlmssp_state - > ntlmssp_hash ,
sizeof ( ntlmssp_state - > ntlmssp_hash ) ) ;
NTLMSSPcalc_ap ( ntlmssp_state - > ntlmssp_hash , data , length ) ;
dump_data_pw ( " ntlmssp hash: \n " , ntlmssp_state - > ntlmssp_hash ,
sizeof ( ntlmssp_state - > ntlmssp_hash ) ) ;
NTLMSSPcalc_ap ( ntlmssp_state - > ntlmssp_hash , sig - > data + 4 , sig - > length - 4 ) ;
}
dump_data_pw ( " ntlmssp sealed data \n " , data , length ) ;
/* increment counter on send */
ntlmssp_state - > ntlmssp_seq_num + + ;
return NT_STATUS_OK ;
}
/**
* Unseal data with the NTLMSSP algorithm
*
*/
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
NTSTATUS ntlmssp_unseal_packet ( NTLMSSP_STATE * ntlmssp_state ,
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
uchar * data , size_t length ,
DATA_BLOB * sig )
{
2004-01-05 03:11:35 +03:00
if ( ! ntlmssp_state - > session_key . length ) {
DEBUG ( 3 , ( " NO session key, cannot unseal packet \n " ) ) ;
return NT_STATUS_NO_USER_SESSION_KEY ;
}
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
DEBUG ( 10 , ( " ntlmssp__unseal_data: seal \n " ) ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
dump_data_pw ( " ntlmssp sealed data \n " , data , length ) ;
if ( ntlmssp_state - > neg_flags & NTLMSSP_NEGOTIATE_NTLM2 ) {
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
NTLMSSPcalc_ap ( ntlmssp_state - > recv_seal_hash , data , length ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
} else {
dump_data_pw ( " ntlmssp hash: \n " , ntlmssp_state - > ntlmssp_hash ,
sizeof ( ntlmssp_state - > ntlmssp_hash ) ) ;
NTLMSSPcalc_ap ( ntlmssp_state - > ntlmssp_hash , data , length ) ;
}
dump_data_pw ( " ntlmssp clear data \n " , data , length ) ;
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
return ntlmssp_check_packet ( ntlmssp_state , data , length , sig ) ;
2003-03-10 05:14:35 +03:00
}
/**
Initialise the state for NTLMSSP signing .
*/
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
NTSTATUS ntlmssp_sign_init ( NTLMSSP_STATE * ntlmssp_state )
2003-03-10 05:14:35 +03:00
{
unsigned char p24 [ 24 ] ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
ZERO_STRUCT ( p24 ) ;
DEBUG ( 3 , ( " NTLMSSP Sign/Seal - Initialising with flags: \n " ) ) ;
debug_ntlmssp_flags ( ntlmssp_state - > neg_flags ) ;
2003-03-10 05:14:35 +03:00
2004-01-05 03:11:35 +03:00
if ( ! ntlmssp_state - > session_key . length ) {
DEBUG ( 3 , ( " NO session key, cannot intialise signing \n " ) ) ;
return NT_STATUS_NO_USER_SESSION_KEY ;
}
2003-03-10 05:14:35 +03:00
if ( ntlmssp_state - > neg_flags & NTLMSSP_NEGOTIATE_NTLM2 )
{
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
const char * send_sign_const ;
const char * send_seal_const ;
const char * recv_sign_const ;
const char * recv_seal_const ;
switch ( ntlmssp_state - > role ) {
case NTLMSSP_CLIENT :
send_sign_const = CLI_SIGN ;
send_seal_const = CLI_SEAL ;
recv_sign_const = SRV_SIGN ;
recv_seal_const = SRV_SEAL ;
break ;
case NTLMSSP_SERVER :
send_sign_const = SRV_SIGN ;
send_seal_const = SRV_SEAL ;
recv_sign_const = CLI_SIGN ;
recv_seal_const = CLI_SEAL ;
break ;
2004-11-20 23:10:43 +03:00
default :
send_sign_const = " unknown role " ;
send_seal_const = " unknown role " ;
recv_sign_const = " unknown role " ;
recv_seal_const = " unknown role " ;
break ;
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
}
calc_ntlmv2_hash ( ntlmssp_state - > send_sign_hash ,
ntlmssp_state - > send_sign_const ,
ntlmssp_state - > session_key , send_sign_const ) ;
dump_data_pw ( " NTLMSSP send sign hash: \n " ,
ntlmssp_state - > send_sign_hash ,
sizeof ( ntlmssp_state - > send_sign_hash ) ) ;
calc_ntlmv2_hash ( ntlmssp_state - > send_seal_hash ,
ntlmssp_state - > send_seal_const ,
ntlmssp_state - > session_key , send_seal_const ) ;
dump_data_pw ( " NTLMSSP send sesl hash: \n " ,
ntlmssp_state - > send_seal_hash ,
sizeof ( ntlmssp_state - > send_seal_hash ) ) ;
calc_ntlmv2_hash ( ntlmssp_state - > recv_sign_hash ,
ntlmssp_state - > recv_sign_const ,
2004-01-25 04:11:10 +03:00
ntlmssp_state - > session_key , recv_sign_const ) ;
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
dump_data_pw ( " NTLMSSP receive sign hash: \n " ,
ntlmssp_state - > recv_sign_hash ,
sizeof ( ntlmssp_state - > recv_sign_hash ) ) ;
calc_ntlmv2_hash ( ntlmssp_state - > recv_seal_hash ,
ntlmssp_state - > recv_seal_const ,
2004-01-25 04:11:10 +03:00
ntlmssp_state - > session_key , recv_seal_const ) ;
Changes all over the shop, but all towards:
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0dac63426cda6fac7a295d3aad810ecc)
2003-11-22 16:19:38 +03:00
dump_data_pw ( " NTLMSSP receive seal hash: \n " ,
ntlmssp_state - > recv_sign_hash ,
sizeof ( ntlmssp_state - > recv_sign_hash ) ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
}
else if ( ntlmssp_state - > neg_flags & NTLMSSP_NEGOTIATE_LM_KEY ) {
if ( ! ntlmssp_state - > session_key . data | | ntlmssp_state - > session_key . length < 8 ) {
2003-07-16 09:51:10 +04:00
/* can't sign or check signatures yet */
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
DEBUG ( 5 , ( " NTLMSSP Sign/Seal - cannot use LM KEY yet \n " ) ) ;
return NT_STATUS_UNSUCCESSFUL ;
}
DEBUG ( 5 , ( " NTLMSSP Sign/Seal - using LM KEY \n " ) ) ;
2005-02-17 18:32:19 +03:00
calc_hash ( ntlmssp_state - > ntlmssp_hash , ntlmssp_state - > session_key . data , 8 ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
dump_data_pw ( " NTLMSSP hash: \n " , ntlmssp_state - > ntlmssp_hash ,
sizeof ( ntlmssp_state - > ntlmssp_hash ) ) ;
} else {
if ( ! ntlmssp_state - > session_key . data | | ntlmssp_state - > session_key . length < 16 ) {
2003-07-16 09:51:10 +04:00
/* can't sign or check signatures yet */
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
DEBUG ( 5 , ( " NTLMSSP Sign/Seal - cannot use NT KEY yet \n " ) ) ;
return NT_STATUS_UNSUCCESSFUL ;
}
2003-03-10 05:14:35 +03:00
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
DEBUG ( 5 , ( " NTLMSSP Sign/Seal - using NT KEY \n " ) ) ;
2005-02-17 18:32:19 +03:00
calc_hash ( ntlmssp_state - > ntlmssp_hash , ntlmssp_state - > session_key . data , 16 ) ;
Jeremy requested that I get my NTLMSSP patch into CVS. He didn't request
the schannel code, but I've included that anyway. :-)
This patch revives the client-side NTLMSSP support for RPC named pipes
in Samba, and cleans up the client and server schannel code. The use of the
new code is enabled by the 'sign', 'seal' and 'schannel' commands in
rpcclient.
The aim was to prove that our separate NTLMSSP client library actually
implements NTLMSSP signing and sealing as per Microsoft's NTLMv1 implementation,
in the hope that knowing this will assist us in correctly implementing
NTLMSSP signing for SMB packets. (Still not yet functional)
This patch replaces the NTLMSSP implementation in rpc_client/cli_pipe.c with
calls to libsmb/ntlmssp.c. In the process, we have gained the ability to
use the more secure NT password, and the ability to sign-only, instead of
having to seal the pipe connection. (Previously we were limited to sealing,
and could only use the LM-password derived key).
Our new client-side NTLMSSP code also needed alteration to cope with our
comparatively simple server-side implementation. A future step is to replace
it with calls to the same NTLMSSP library.
Also included in this patch is the schannel 'sign only' patch I submitted to
the team earlier. While not enabled (and not functional, at this stage) the
work in this patch makes the code paths *much* easier to follow. I have also
included similar hooks in rpccleint to allow the use of schannel on *any* pipe.
rpcclient now defaults to not using schannel (or any other extra per-pipe
authenticiation) for any connection. The 'schannel' command enables schannel
for all pipes until disabled.
This code is also much more secure than the previous code, as changes to our
cli_pipe routines ensure that the authentication footer cannot be removed
by an attacker, and more error states are correctly handled.
(The same needs to be done to our server)
Andrew Bartlett
(This used to be commit 5472ddc9eaf4e79c5b2e1c8ee8c7f190dc285f19)
2003-07-14 12:46:32 +04:00
dump_data_pw ( " NTLMSSP hash: \n " , ntlmssp_state - > ntlmssp_hash ,
sizeof ( ntlmssp_state - > ntlmssp_hash ) ) ;
2003-03-10 05:14:35 +03:00
}
ntlmssp_state - > ntlmssp_seq_num = 0 ;
return NT_STATUS_OK ;
}