Initial version imported to CVS

(This used to be commit 291551d807)

examples/simple/README

@@ -0,0 +1,2 @@
+This is the "original" sample config file.
+

examples/simple/smb.conf

@@ -0,0 +1,165 @@
+; Configuration file for smbd.
+; ============================================================================
+; For the format of this file and comprehensive descriptions of all the
+; configuration option, please refer to the man page for smb.conf(5).
+;
+; The following configuration should suit most systems for basic usage and 
+; initial testing. It gives all clients access to their home directories and
+; allows access to all printers specified in /etc/printcap.
+;
+; Things you need to check:
+; --------------------------
+;
+; 1: Check the path to your printcap file. If you are using a system that does 
+;    not use printcap (eg., Solaris), create a file containing lines of the 
+;    form
+;
+;       printername|printername|printername|
+;
+;    where each "printername" is the name of a printer you want to provide 
+;    access to. Then alter the "printcap =" entry to point to the new file.
+;
+;    If using Solaris, the following command will generate a suitable printcap
+;    file:
+;
+;       lpc status | grep ":" | sed s/:/\|/ > myprintcap
+;
+; 2: Make sure the "print command" entry is correct for your system. This 
+;    command should submit a file (represented by %s) to a printer 
+;    (represented by %p) for printing and should REMOVE the file after 
+;    printing.
+;  
+;    One most systems the default will be OK, as long as you get "printing ="
+;    right.
+;    
+;    It is also a good idea to use an absolute path in the print command
+;    as there is no guarantee the search path will be set correctly.
+;
+; 3: Make sure the "printing =" option is set correctly for your system.
+;    Possible values are "sysv", "bsd" or "aix".
+;
+; 4: Make sure the "lpq command" entry is correct for your system. The default
+;    may not work for you.
+;
+; 5: Make sure that the user specified in "guest account" exists. Typically
+;    this will be a user that cannot log in and has minimal privileges.
+;    Often the "nobody" account doesn't work (very system dependant).
+;
+; 6: You should consider the "security =" option. See a full description
+;    in the main documentation and the smb.conf(5) manual page
+;
+; 7: Look at the "hosts allow" option, unless you want everyone on the internet
+;    to be able to access your files.
+;
+[global]
+   printing = bsd
+   printcap name = /etc/printcap
+   load printers = yes
+   guest account = pcguest
+;  This next option sets a separate log file for each client. Remove
+;  it if you want a combined log file.
+   log file = /usr/local/samba/log.%m
+
+;  You will need a world readable lock directory and "share modes=yes"
+;  if you want to support the file sharing modes for multiple users
+;  of the same files
+;  lock directory = /usr/local/samba/var/locks
+;  share modes = yes
+
+[homes]
+   comment = Home Directories
+   browseable = no
+   read only = no
+   create mode = 0750
+
+[printers]
+   comment = All Printers
+   browseable = no
+   printable = yes
+   public = no
+   writable = no
+   create mode = 0700
+
+; you might also want this one
+; [tmp]
+;   comment = Temporary file space
+;   path = /tmp
+;   read only = no
+;   public = yes
+
+;
+; Other examples. 
+;
+; A private printer, usable only by fred. Spool data will be placed in fred's
+; home directory. Note that fred must have write access to the spool directory,
+; wherever it is.
+;[fredsprn]
+;   comment = Fred's Printer
+;   valid users = fred
+;   path = /homes/fred
+;   printer = freds_printer
+;   public = no
+;   writable = no
+;   printable = yes
+;
+; A private directory, usable only by fred. Note that fred requires write
+; access to the directory.
+;[fredsdir]
+;   comment = Fred's Service
+;   path = /usr/somewhere/private
+;   valid users = fred
+;   public = no
+;   writable = yes
+;   printable = no
+;
+; A publicly accessible directory, but read only, except for people in
+; the staff group
+;[public]
+;   comment = Public Stuff
+;   path = /usr/somewhere/public
+;   public = yes
+;   writable = no
+;   printable = no
+;   write list = @staff
+;
+; a service which has a different directory for each machine that connects
+; this allows you to tailor configurations to incoming machines. You could
+; also use the %u option to tailor it by user name.
+; The %m gets replaced with the machine name that is connecting.
+;[pchome]
+;  comment = PC Directories
+;  path = /usr/pc/%m
+;  public = no
+;  writeable = yes
+;
+;
+; A publicly accessible directory, read/write to all users. Note that all files
+; created in the directory by users will be owned by the default user, so
+; any user with access can delete any other user's files. Obviously this
+; directory must be writable by the default user. Another user could of course
+; be specified, in which case all files would be owned by that user instead.
+;[public]
+;   path = /usr/somewhere/else/public
+;   public = yes
+;   only guest = yes
+;   writable = yes
+;   printable = no
+;
+;
+; The following two entries demonstrate how to share a directory so that two
+; users can place files there that will be owned by the specific users. In this
+; setup, the directory should be writable by both users and should have the
+; sticky bit set on it to prevent abuse. Obviously this could be extended to
+; as many users as required.
+;[myshare]
+;   comment = Mary's and Fred's stuff
+;   path = /usr/somewhere/shared
+;   valid users = mary fred
+;   public = no
+;   writable = yes
+;   printable = no
+;   create mask = 0765
+
+
+
+