Welcome to Pacific HiTech TurboLinux support.

packaging/PHT/TurboLinux/README

@@ -0,0 +1,11 @@
+Preparation Date: October 25, 1998
+Preparer:	  John H Terpstra <jht@samba.anu.edu.au>
+
+Instructions:	Preparing Samba Packages for TurboLinux
+===============================================================
+
+We provide support only for current versions of TurboLinux.
+
+To produce the RPMS simply type:
+	sh makerpms.sh
+

packaging/PHT/TurboLinux/findsmb

@@ -0,0 +1,141 @@
+#!/usr/bin/perl
+#
+# Prints info on all smb responding machines on a subnet.
+# This script needs to be run on a machine without nmbd running and be
+# run as root to get correct info from WIN95 clients.
+#
+# syntax:
+#    findsmb [subnet broadcast address]
+#
+# with no agrument it will list machines on the current subnet
+#
+# There will be a "+" in front of the workgroup name for machines that are
+# local master browsers for that workgroup. There will be an "*" in front
+# of the workgroup name for machines that are the domain master browser for
+# that workgroup.
+#
+
+$SAMBABIN = "/usr/bin";
+
+for ($i = 0; $i < 2; $i++) {	# test for -d option and broadcast address
+  $_ = shift;
+  if (m/-d|-D/) {
+    $DEBUG = 1;
+  } else  {
+    if ($_) {
+      $BCAST = "-B $_";
+    }
+  }
+}
+
+sub ipsort			# do numeric sort on last field of IP address
+{
+  @t1 = split(/\./,$a);
+  @t2 = split(/\./,$b);
+  @t1[3] <=> @t2[3];
+}
+
+# look for all machines that respond to a name lookup
+
+open(NMBLOOKUP,"$SAMBABIN/nmblookup $BCAST '*'|") || 
+  die("Can't run nmblookup '*'.\n");
+
+# get rid of all lines that are not a response IP address,
+# strip everything but IP address and sort by last field in address
+
+@ipaddrs = sort ipsort grep(s/ \*<00>.*$//,<NMBLOOKUP>);
+
+# print header info
+
+print "\nIP ADDR         NETBIOS NAME   WORKGROUP/OS/VERSION $BCAST\n";
+print "---------------------------------------------------------------------\n";
+
+foreach $ip (@ipaddrs)		# loop through each IP address found
+{
+  $ip =~ s/\n//;		# strip newline from IP address
+
+# find the netbios names registered by each machine
+
+  open(NMBLOOKUP,"$SAMBABIN/nmblookup -r -A $ip|") || 
+	die("Can't get nmb name list.\n");
+  @nmblookup = <NMBLOOKUP>;
+  close NMBLOOKUP;
+
+# get the first <00> name
+
+  @name = grep(/<00>/,@nmblookup);
+  $_ = @name[0];
+  if ($_) {                     # we have a netbios name
+    if (/GROUP/) {		# is it a group name
+	($name, $aliases, $type, $length, @addresses) = 
+	gethostbyaddr(pack('C4',split('\.',$ip)),2);
+	if (! $name) {			# could not get name
+	    $name = "unknown nis name";
+	}
+    } else {
+	/(\S+)/;
+	$name = $1;
+    }
+
+# do an smbclient command on the netbios name.
+
+    open(SMB,"$SAMBABIN/smbclient -N -L $name -I $ip -U% |") ||
+	die("Can't do smbclient command.\n");
+    @smb = <SMB>;
+    close SMB;
+
+    if ($DEBUG) {		# if -d flag print results of nmblookup and smbclient
+      print "===============================================================\n";
+      print @nmblookup;
+      print @smb;
+    }
+
+# look for the OS= string
+
+    @info = grep(/OS=/,@smb);
+    $_ = @info[0];
+    if ($_) {				# we found response
+      s/Domain=|OS=|Server=|\n//g;	# strip out descriptions to make line shorter
+
+    } else {				# no OS= string in response (WIN95 client)
+
+# for WIN95 clients get workgroup name from nmblookup response
+      @name = grep(/<00> - <GROUP>/,@nmblookup);
+      $_ = @name[0];
+      if ($_) {
+        /(\S+)/;
+        $_ = "[$1]";
+      } else {
+	$_ = "Unknown Workgroup";
+      }
+    }
+
+# see if machine registered a local master browser name
+    if (grep(/<1d>/,@nmblookup)) {
+      $master = '+';			# indicate local master browser
+      if (grep(/<1b>/,@nmblookup)) {	# how about domain master browser?
+        $master = '*';			# indicate domain master browser
+      }
+    } else {
+      $master = ' ';			# not a browse master
+    }
+
+# line up info in 3 columns
+
+    print "$ip".' 'x(16-length($ip))."$name".' 'x(14-length($name))."$master"."$_\n";
+
+  } else {				# no netbios name found
+# try getting the host name
+    ($name, $aliases, $type, $length, @addresses) = 
+      gethostbyaddr(pack('C4',split('\.',$ip)),2);
+    if (! $name) {			# could not get name
+      $name = "unknown nis name";
+    }
+    if ($DEBUG) {			# if -d flag print results of nmblookup
+      print "===============================================================\n";
+      print @nmblookup;
+    }
+    print "$ip".' 'x(16-length($ip))."$name\n";
+  }
+} 
+

packaging/PHT/TurboLinux/makefile-path.patch

@@ -0,0 +1,43 @@
+--- samba-2.0.0/source/Makefile.in.orig	Sat Aug 22 02:48:36 1998
++++ samba-2.0.0/source/Makefile.in	Fri Aug 21 22:19:32 1998
+@@ -23,11 +23,11 @@
+ .SUFFIXES:
+ .SUFFIXES: .c .o
+ 
+-BASEDIR=$(prefix)/samba
++BASEDIR= /usr
+ BINDIR = $(BASEDIR)/bin
+-SBINDIR = $(BASEDIR)/bin
+-LIBDIR = $(BASEDIR)/lib
+-VARDIR = $(BASEDIR)/var
++SBINDIR = $(BASEDIR)/sbin
++LIBDIR = /etc
++VARDIR = /var
+ MANDIR = $(BASEDIR)/man
+ 
+ # The permissions to give the executables
+@@ -36,19 +36,19 @@
+ # set these to where to find various files
+ # These can be overridden by command line switches (see smbd(8))
+ # or in smb.conf (see smb.conf(5))
+-SMBLOGFILE = $(VARDIR)/log.smb
+-NMBLOGFILE = $(VARDIR)/log.nmb
++SMBLOGFILE = $(VARDIR)/log/samba/log.smb
++NMBLOGFILE = $(VARDIR)/log/samba/log.nmb
+ CONFIGFILE = $(LIBDIR)/smb.conf
+ LMHOSTSFILE = $(LIBDIR)/lmhosts
+ DRIVERFILE = $(LIBDIR)/printers.def
+ SMB_PASSWD = $(BINDIR)/smbpasswd
+-SMB_PASSWD_FILE = $(BASEDIR)/private/smbpasswd
++SMB_PASSWD_FILE = $(LIBDIR)/smbpasswd
+ 
+ # This is where SWAT images and help files go
+-SWATDIR = $(BASEDIR)/swat
++SWATDIR = $(BASEDIR)/share/swat
+ 
+ # the directory where lock files go
+-LOCKDIR = $(VARDIR)/locks
++LOCKDIR = $(VARDIR)/lock/samba
+ 
+ # The directory where code page definition files go
+ CODEPAGEDIR = $(LIBDIR)/codepages

packaging/PHT/TurboLinux/makerpms.sh.tmpl

@@ -0,0 +1,14 @@
+#!/bin/sh
+# Copyright (C) John H Terpstra 1998
+#
+RPMDIR=`rpm --showrc | awk '/^rpmdir/ { print $3}'`
+SPECDIR=`rpm --showrc | awk '/^specdir/ { print $3}'`
+SRCDIR=`rpm --showrc | awk '/^sourcedir/ { print $3}'`
+
+( cd ../../.. ; tar czvf ${SRCDIR}/samba-PVERSION.tar.gz samba-PVERSION )
+cp -a *.spec $SPECDIR
+cp -a *.patch smb.* samba.log $SRCDIR
+cd $SRCDIR
+chown -R root.root samba-PVERSION
+cd $SPECDIR
+rpm -ba -v samba2.spec

packaging/PHT/TurboLinux/samba.log

@@ -0,0 +1,11 @@
+/var/log/samba/log.nmb {
+    postrotate
+	/usr/bin/killall -HUP nmbd
+    endrotate
+}
+
+/var/log/samba/log.smb {
+    postrotate
+	/usr/bin/killall -HUP smbd
+    endrotate
+}

packaging/PHT/TurboLinux/samba.pamd

@@ -0,0 +1,2 @@
+auth	required	/lib/security/pam_pwdb.so nullok shadow
+account	required	/lib/security/pam_pwdb.so

packaging/PHT/TurboLinux/samba2.spec.tmpl

@@ -0,0 +1,287 @@
+Summary: Samba SMB client and server
+Name: samba
+Version: PVERSION
+Release: PRELEASE
+Copyright: GNU GPL version 2
+Group: Networking
+Source: ftp://samba.anu.edu.au/pub/samba/samba-PVERSION.tar.gz
+Patch: makefile-path.patch
+Patch1: smbw.patch
+Packager: John H Terpstra [Samba-Team] <jht@samba.anu.edu.au>
+Requires: pam >= 0.64
+BuildRoot: /tmp/samba
+
+%description
+Samba provides an SMB server which can be used to provide
+network services to SMB (sometimes called "Lan Manager")
+clients, including various versions of MS Windows, OS/2,
+and other Linux machines. Samba also provides some SMB
+clients, which complement the built-in SMB filesystem
+in Linux. Samba uses NetBIOS over TCP/IP (NetBT) protocols
+and does NOT need NetBEUI (Microsoft Raw NetBIOS frame)
+protocol.
+
+Samba-2 features an almost working NT Domain Control
+capability and includes the new SWAT (Samba Web Administration
+Tool) that allows samba's smb.conf file to be remotely managed
+using your favourite web browser. For the time being this is
+being enabled on TCP port 901 via inetd.
+
+Please refer to the WHATSNEW.txt document for fixup information.
+This binary release includes encrypted password support.
+Please read the smb.conf file and ENCRYPTION.txt in the
+docs directory for implementation details.
+
+NOTE: TurboLinux uses PAM which has integrated support
+for Shadow passwords. Do NOT recompile with the SHADOW_PWD option
+enabled. Red Hat Linux has built in support for quotas in PAM.
+
+%changelog
+* Sun Oct 25 1998 John H Terpstra <jht@samba.anu.edu.au>
+ - Added modifier to /config specifier so that smb.conf,
+	lmhosts and smbusers never get lost
+
+* Sat Oct 24 1998 John H Terpstra <jht@samba.anu.edu.au>
+ - removed README.smbsh file from docs area
+
+* Mon Oct 05 1998 John H Terpstra <jht@samba.anu.edu.au>
+ - Added rpcclient to binaries list
+ - Added smbwrapper stuff
+
+* Fri Aug 21 1998 John H Terpstra <jht@samba.anu.edu.au>
+ - Updated for Samba version 2.0 building
+
+* Sat Jul 4 1998 John H Terpstra <jht@samba.anu.edu.au>
+ - fixed codepage preservation during update via -Uvh
+
+* Sun Apr 26 1998 John H Terpstra <jht@samba.anu.edu.au>
+ - Tidy up for early alpha releases
+ - added findsmb from SGI packaging
+
+* Thu Apr 9 1998 John H Terpstra <jht@samba.anu.edu.au>
+ - Updated spec file
+ - Included new codepage.936
+
+* Sat Mar 20 1998 John H Terpstra <jht@samba.anu.edu/au>
+ - Added swat facility
+
+* Sat Jan 24 1998 John H Terpstra <jht@samba.anu.edu.au>
+ - Many optimisations (some suggested by Manoj Kasichainula <manojk@io.com>
+  - Use of chkconfig in place of individual symlinks to /etc/rc.d/init/smb
+  - Compounded make line
+  - Updated smb.init restart mechanism
+  - Use compound mkdir -p line instead of individual calls to mkdir
+  - Fixed smb.conf file path for log files
+  - Fixed smb.conf file path for incoming smb print spool directory
+  - Added a number of options to smb.conf file
+  - Added smbadduser command (missed from all previous RPMs) - Doooh!
+  - Added smbuser file and smb.conf file updates for username map
+
+%prep
+%setup
+%patch -p1
+%patch1 -p1
+
+%build
+cd source
+./configure
+make all smbwrapper
+
+%install
+rm -rf $RPM_BUILD_ROOT
+mkdir -p $RPM_BUILD_ROOT
+mkdir -p $RPM_BUILD_ROOT/etc/codepages/src
+mkdir -p $RPM_BUILD_ROOT/etc/{logrotate.d,pam.d}
+mkdir -p $RPM_BUILD_ROOT/etc/rc.d/{init.d,rc0.d,rc1.d,rc2.d,rc3.d,rc5.d,rc6.d}
+mkdir -p $RPM_BUILD_ROOT/home/samba
+mkdir -p $RPM_BUILD_ROOT/usr/{bin,sbin}
+mkdir -p $RPM_BUILD_ROOT/usr/share/swat/{images,help,include}
+mkdir -p $RPM_BUILD_ROOT/usr/man/{man1,man5,man7,man8}
+mkdir -p $RPM_BUILD_ROOT/var/lock/samba
+mkdir -p $RPM_BUILD_ROOT/var/log/samba
+mkdir -p $RPM_BUILD_ROOT/var/spool/samba
+
+# Install standard binary files
+for i in nmblookup smbclient smbpasswd smbrun smbstatus testparm testprns \
+      make_smbcodepage make_printerdef rpcclient smbsh smbwrapper.so
+do
+install -m755 -s source/bin/$i $RPM_BUILD_ROOT/usr/bin
+done
+for i in addtosmbpass mksmbpasswd.sh smbtar 
+do
+install -m755 source/script/$i $RPM_BUILD_ROOT/usr/bin
+done
+
+# Install secure binary files
+for i in smbd nmbd swat
+do
+install -m755 -s source/bin/$i $RPM_BUILD_ROOT/usr/sbin
+done
+
+# Install level 1 man pages
+for i in smbclient.1 smbrun.1 smbstatus.1 smbtar.1 testparm.1 testprns.1 make_smbcodepage.1
+do
+install -m644 docs/$i $RPM_BUILD_ROOT/usr/man/man1
+done
+
+# Install codepage source files
+for i in 437 737 850 852 861 866 932 936 949 950
+do
+install -m644 source/codepages/codepage_def.$i $RPM_BUILD_ROOT/etc/codepages/src
+done
+
+# Install SWAT helper files
+for i in swat/help/*.html
+do
+install -m644 $i $RPM_BUILD_ROOT/usr/share/swat/help
+done
+for i in swat/images/*.{jpg,gif}
+do
+install -m644 $i $RPM_BUILD_ROOT/usr/share/swat/images
+done
+for i in swat/include/*.html
+do
+install -m644 $i $RPM_BUILD_ROOT/usr/share/swat/include
+done
+
+# Install the miscellany
+install -m644 swat/README $RPM_BUILD_ROOT/usr/share/swat
+install -m644 docs/smb.conf.5 $RPM_BUILD_ROOT/usr/man/man5
+install -m644 docs/samba.7 $RPM_BUILD_ROOT/usr/man/man7
+install -m644 docs/smbd.8 $RPM_BUILD_ROOT/usr/man/man8
+install -m644 docs/nmbd.8 $RPM_BUILD_ROOT/usr/man/man8
+install -m644 docs/smbpasswd.8 $RPM_BUILD_ROOT/usr/man/man8
+install -m644 packaging/RedHat/smb.conf $RPM_BUILD_ROOT/etc/smb.conf
+install -m644 packaging/RedHat/smbusers $RPM_BUILD_ROOT/etc/smbusers
+install -m755 packaging/RedHat/smbprint $RPM_BUILD_ROOT/usr/bin
+install -m755 packaging/RedHat/findsmb $RPM_BUILD_ROOT/usr/bin
+install -m755 packaging/RedHat/smbadduser $RPM_BUILD_ROOT/usr/bin
+install -m755 packaging/RedHat/smb.init $RPM_BUILD_ROOT/etc/rc.d/init.d/smb
+install -m755 packaging/RedHat/smb.init $RPM_BUILD_ROOT/usr/sbin/samba
+install -m644 packaging/RedHat/samba.pamd $RPM_BUILD_ROOT/etc/pam.d/samba
+install -m644 packaging/RedHat/samba.log $RPM_BUILD_ROOT/etc/logrotate.d/samba
+echo 127.0.0.1 localhost > $RPM_BUILD_ROOT/etc/lmhosts
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%post
+/sbin/chkconfig --add smb
+
+# Build codepage load files
+for i in 437 737 850 852 861 866 932 936 949 950
+do
+/usr/bin/make_smbcodepage c $i /etc/codepages/src/codepage_def.$i /etc/codepages/codepage.$i
+done
+
+# Add swat entry to /etc/services if not already there
+if !( grep ^[:space:]*swat /etc/services > /dev/null ) then
+	echo 'swat		901/tcp				# Add swat service used via inetd' >> /etc/services
+fi
+
+# Add swat entry to /etc/inetd.conf if needed
+if !( grep ^[:space:]*swat /etc/inetd.conf > /dev/null ) then
+	echo 'swat	stream	tcp	nowait.400	root	/usr/sbin/swat swat' >> /etc/inetd.conf
+killall -1 inetd
+fi
+
+
+%preun
+/sbin/chkconfig --del smb
+
+%postun
+if [ -x /etc/pam.d/samba ]; then
+  rm -f /etc/pam.d/samba
+fi
+if [ -e /etc/codepages ]; then
+  rm -rf /etc/codepages
+fi
+if [ -e /var/log/samba ]; then
+  rm -rf /var/log/samba
+fi
+if [ -e /var/lock/samba ]; then
+  rm -rf /var/lock/samba
+fi
+# Remove swat entries from /etc/inetd.conf and /etc/services
+cd /etc
+tmpfile=/etc/tmp.$$
+sed -e '/^[:space:]*swat.*$/d' /etc/inetd.conf > $tmpfile
+mv $tmpfile inetd.conf
+sed -e '/^[:space:]*swat.*$/d' /etc/services > $tmpfile
+mv $tmpfile services
+
+%files
+%doc README COPYING Manifest Read-Manifest-Now
+%doc WHATSNEW.txt Roadmap
+%doc docs
+%doc swat/README
+%doc examples
+%attr(-,root,root) /usr/sbin/smbd
+%attr(-,root,root) /usr/sbin/nmbd
+%attr(-,root,root) /usr/sbin/swat
+%attr(0755,root,root) /usr/sbin/samba
+%attr(-,root,root) /usr/bin/addtosmbpass
+%attr(-,root,root) /usr/bin/mksmbpasswd.sh
+%attr(-,root,root) /usr/bin/smbclient
+%attr(-,root,root) /usr/bin/rpcclient
+%attr(-,root,root) /usr/bin/testparm
+%attr(-,root,root) /usr/bin/testprns
+%attr(-,root,root) /usr/bin/smbrun
+%attr(-,root,root) /usr/bin/findsmb
+%attr(-,root,root) /usr/bin/smbstatus
+%attr(-,root,root) /usr/bin/nmblookup
+%attr(-,root,root) /usr/bin/make_smbcodepage
+%attr(-,root,root) /usr/bin/make_printerdef
+%attr(-,root,root) /usr/bin/smbpasswd
+%attr(-,root,root) /usr/bin/smbtar
+%attr(-,root,root) /usr/bin/smbprint
+%attr(-,root,root) /usr/bin/smbadduser
+%attr(0755,root,root) /usr/bin/smbsh
+%attr(0755,root,root) /usr/bin/smbwrapper.so
+%attr(-,root,root) /usr/share/swat/help/parameters.html
+%attr(-,root,root) /usr/share/swat/help/welcome.html
+%attr(-,root,root) /usr/share/swat/images/background.jpg
+%attr(-,root,root) /usr/share/swat/images/background.gif
+%attr(-,root,root) /usr/share/swat/images/globals.gif
+%attr(-,root,root) /usr/share/swat/images/home.gif
+%attr(-,root,root) /usr/share/swat/images/printers.gif
+%attr(-,root,root) /usr/share/swat/images/shares.gif
+%attr(-,root,root) /usr/share/swat/images/samba.gif
+%attr(-,root,root) /usr/share/swat/images/status.gif
+%attr(-,root,root) /usr/share/swat/images/viewconfig.gif
+%attr(-,root,root) /usr/share/swat/include/header.html
+%attr(-,root,root) /usr/share/swat/include/footer.html
+%attr(-,root,root) %config(noreplace) /etc/lmhosts
+%attr(-,root,root) %config(noreplace) /etc/smb.conf
+%attr(-,root,root) %config(noreplace) /etc/smbusers
+%attr(-,root,root) /etc/rc.d/init.d/smb
+%attr(-,root,root) /etc/logrotate.d/samba
+%attr(-,root,root) /etc/pam.d/samba
+%attr(-,root,root) /etc/codepages/src/codepage_def.437
+%attr(-,root,root) /etc/codepages/src/codepage_def.737
+%attr(-,root,root) /etc/codepages/src/codepage_def.850
+%attr(-,root,root) /etc/codepages/src/codepage_def.852
+%attr(-,root,root) /etc/codepages/src/codepage_def.861
+%attr(-,root,root) /etc/codepages/src/codepage_def.866
+%attr(-,root,root) /etc/codepages/src/codepage_def.932
+%attr(-,root,root) /etc/codepages/src/codepage_def.936
+%attr(-,root,root) /etc/codepages/src/codepage_def.949
+%attr(-,root,root) /etc/codepages/src/codepage_def.950
+%attr(-,root,root) /usr/man/man1/smbstatus.1
+%attr(-,root,root) /usr/man/man1/smbclient.1
+%attr(-,root,root) /usr/man/man1/make_smbcodepage.1
+%attr(-,root,root) /usr/man/man1/smbrun.1
+%attr(-,root,root) /usr/man/man1/smbtar.1
+%attr(-,root,root) /usr/man/man1/testparm.1
+%attr(-,root,root) /usr/man/man1/testprns.1
+%attr(-,root,root) /usr/man/man5/smb.conf.5
+%attr(-,root,root) /usr/man/man7/samba.7
+%attr(-,root,root) /usr/man/man8/smbd.8
+%attr(-,root,root) /usr/man/man8/nmbd.8
+%attr(-,root,root) /usr/man/man8/smbpasswd.8
+%attr(-,root,nobody) %dir /home/samba
+%attr(-,root,root) %dir /etc/codepages
+%attr(-,root,root) %dir /etc/codepages/src
+%attr(-,root,root) %dir /var/lock/samba
+%attr(-,root,root) %dir /var/log/samba
+%attr(777,root,root) %dir /var/spool/samba

packaging/PHT/TurboLinux/smb.conf

@@ -0,0 +1,281 @@
+# This is the main Samba configuration file. You should read the
+# smb.conf(5) manual page in order to understand the options listed
+# here. Samba has a huge number of configurable options (perhaps too
+# many!) most of which are not shown in this example
+#
+# Any line which starts with a ; (semi-colon) or a # (hash) 
+# is a comment and is ignored. In this example we will use a #
+# for commentry and a ; for parts of the config file that you
+# may wish to enable
+#
+# NOTE: Whenever you modify this file you should run the command "testparm"
+# to check that you have not many any basic syntactic errors. 
+#
+#======================= Global Settings =====================================
+[global]
+
+# workgroup = NT-Domain-Name or Workgroup-Name
+   workgroup = MYGROUP
+
+# server string is the equivalent of the NT Description field
+   server string = Samba Server
+
+# This option is important for security. It allows you to restrict
+# connections to machines which are on your local network. The
+# following example restricts access to two C class networks and
+# the "loopback" interface. For more examples of the syntax see
+# the smb.conf man page
+;   hosts allow = 192.168.1. 192.168.2. 127.
+
+# if you want to automatically load your printer list rather
+# than setting them up individually then you'll need this
+   printcap name = /etc/printcap
+   load printers = yes
+
+# It should not be necessary to spell out the print system type unless
+# yours is non-standard. Currently supported print systems include:
+# bsd, sysv, plp, lprng, aix, hpux, qnx
+;   printing = bsd
+
+# Uncomment this if you want a guest account, you must add this to /etc/passwd
+# otherwise the user "nobody" is used
+;  guest account = pcguest
+
+# this tells Samba to use a separate log file for each machine
+# that connects
+   log file = /var/log/samba/log.%m
+
+# Put a capping on the size of the log files (in Kb).
+   max log size = 50
+
+# Security mode. Most people will want user level security. See
+# security_level.txt for details.
+   security = user
+# Use password server option only with security = server
+;   password server = <NT-Server-Name>
+
+# Password Level allows matching of _n_ characters of the password for
+# all combinations of upper and lower case.
+;  password level = 8
+;  username level = 8
+
+# You may wish to use password encryption. Please read
+# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
+# Do not enable this option unless you have read those documents
+;  encrypt passwords = yes
+;  smb passwd file = /etc/smbpasswd
+
+# Unix users can map to different SMB User names
+;  username map = /etc/smbusers
+
+# Using the following line enables you to customise your configuration
+# on a per machine basis. The %m gets replaced with the netbios name
+# of the machine that is connecting
+;   include = /etc/smb.conf.%m
+
+# Most people will find that this option gives better performance.
+# See speed.txt and the manual pages for details
+   socket options = TCP_NODELAY 
+
+# Configure Samba to use multiple interfaces
+# If you have multiple network interfaces then you must list them
+# here. See the man page for details.
+;   interfaces = 192.168.12.2/24 192.168.13.2/24 
+
+# Configure remote browse list synchronisation here
+#  request announcement to, or browse list sync from:
+#	a specific host or from / to a whole subnet (see below)
+;   remote browse sync = 192.168.3.25 192.168.5.255
+# Cause this host to announce itself to local subnets here
+;   remote announce = 192.168.1.255 192.168.2.44
+
+# Browser Control Options:
+# set local master to no if you don't want Samba to become a master
+# browser on your network. Otherwise the normal election rules apply
+;   local master = no
+
+# OS Level determines the precedence of this server in master browser
+# elections. The default value should be reasonable
+;   os level = 33
+
+# Domain Master specifies Samba to be the Domain Master Browser. This
+# allows Samba to collate browse lists between subnets. Don't use this
+# if you already have a Windows NT domain controller doing this job
+;   domain master = yes 
+
+# Preferred Master causes Samba to force a local browser election on startup
+# and gives it a slightly higher chance of winning the election
+;   preferred master = yes
+
+# Use only if you have an NT server on your network that has been
+# configured at install time to be a primary domain controller.
+;   domain controller = <NT-Domain-Controller-SMBName>
+
+# Enable this if you want Samba to be a domain logon server for 
+# Windows95 workstations. 
+;   domain logons = yes
+
+# if you enable domain logons then you may want a per-machine or
+# per user logon script
+# run a specific logon batch file per workstation (machine)
+;   logon script = %m.bat
+# run a specific logon batch file per username
+;   logon script = %U.bat
+
+# Where to store roving profiles (only for Win95 and WinNT)
+#        %L substitutes for this servers netbios name, %U is username
+#        You must uncomment the [Profiles] share below
+;   logon path = \\%L\Profiles\%U
+
+# All NetBIOS names must be resolved to IP Addresses
+# 'Name Resolve Order' allows the named resolution mechanism to be specified
+# the default order is "host lmhosts wins bcast". "host" means use the unix
+# system gethostbyname() function call that will use either /etc/hosts OR
+# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
+# and the /etc/resolv.conf file. "host" therefore is system configuration
+# dependant. This parameter is most often of use to prevent DNS lookups
+# in order to resolve NetBIOS names to IP Addresses. Use with care!
+# The example below excludes use of name resolution for machines that are NOT
+# on the local network segment
+# - OR - are not deliberately to be known via lmhosts or via WINS.
+; name resolve order = wins lmhosts bcast
+
+# Windows Internet Name Serving Support Section:
+# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
+;   wins support = yes
+
+# WINS Server - Tells the NMBD components of Samba to be a WINS Client
+#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
+;   wins server = w.x.y.z
+
+# WINS Proxy - Tells Samba to answer name resolution queries on
+# behalf of a non WINS capable client, for this to work there must be
+# at least one	WINS Server on the network. The default is NO.
+;   wins proxy = yes
+
+# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
+# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
+# this has been changed in version 1.9.18 to no.
+   dns proxy = no 
+
+# Case Preservation can be handy - system default is _no_
+# NOTE: These can be set on a per share basis
+;  preserve case = no
+;  short preserve case = no
+# Default case is normally upper case for all DOS files
+;  default case = lower
+# Be very careful with case sensitivity - it can break things!
+;  case sensitive = no
+
+#============================ Share Definitions ==============================
+[homes]
+   comment = Home Directories
+   browseable = no
+   writable = yes
+
+# Un-comment the following and create the netlogon directory for Domain Logons
+; [netlogon]
+;   comment = Network Logon Service
+;   path = /home/netlogon
+;   guest ok = yes
+;   writable = no
+;   share modes = no
+
+
+# Un-comment the following to provide a specific roving profile share
+# the default is to use the user's home directory
+;[Profiles]
+;    path = /home/profiles
+;    browseable = no
+;    guest ok = yes
+
+
+# NOTE: If you have a BSD-style print system there is no need to 
+# specifically define each individual printer
+[printers]
+   comment = All Printers
+   path = /var/spool/samba
+   browseable = no
+# Set public = yes to allow user 'guest account' to print
+   guest ok = no
+   writable = no
+   printable = yes
+
+# This one is useful for people to share files
+;[tmp]
+;   comment = Temporary file space
+;   path = /tmp
+;   read only = no
+;   public = yes
+
+# A publicly accessible directory, but read only, except for people in
+# the "staff" group
+;[public]
+;   comment = Public Stuff
+;   path = /home/samba
+;   public = yes
+;   writable = yes
+;   printable = no
+;   write list = @staff
+
+# Other examples. 
+#
+# A private printer, usable only by fred. Spool data will be placed in fred's
+# home directory. Note that fred must have write access to the spool directory,
+# wherever it is.
+;[fredsprn]
+;   comment = Fred's Printer
+;   valid users = fred
+;   path = /homes/fred
+;   printer = freds_printer
+;   public = no
+;   writable = no
+;   printable = yes
+
+# A private directory, usable only by fred. Note that fred requires write
+# access to the directory.
+;[fredsdir]
+;   comment = Fred's Service
+;   path = /usr/somewhere/private
+;   valid users = fred
+;   public = no
+;   writable = yes
+;   printable = no
+
+# a service which has a different directory for each machine that connects
+# this allows you to tailor configurations to incoming machines. You could
+# also use the %u option to tailor it by user name.
+# The %m gets replaced with the machine name that is connecting.
+;[pchome]
+;  comment = PC Directories
+;  path = /usr/pc/%m
+;  public = no
+;  writable = yes
+
+# A publicly accessible directory, read/write to all users. Note that all files
+# created in the directory by users will be owned by the default user, so
+# any user with access can delete any other user's files. Obviously this
+# directory must be writable by the default user. Another user could of course
+# be specified, in which case all files would be owned by that user instead.
+;[public]
+;   path = /usr/somewhere/else/public
+;   public = yes
+;   only guest = yes
+;   writable = yes
+;   printable = no
+
+# The following two entries demonstrate how to share a directory so that two
+# users can place files there that will be owned by the specific users. In this
+# setup, the directory should be writable by both users and should have the
+# sticky bit set on it to prevent abuse. Obviously this could be extended to
+# as many users as required.
+;[myshare]
+;   comment = Mary's and Fred's stuff
+;   path = /usr/somewhere/shared
+;   valid users = mary fred
+;   public = no
+;   writable = yes
+;   printable = no
+;   create mask = 0765
+
+

packaging/PHT/TurboLinux/smb.init

@@ -0,0 +1,49 @@
+#!/bin/sh
+#
+# chkconfig: 345 91 35
+# description: Starts and stops the Samba smbd and nmbd daemons \
+#	       used to provide SMB network services.
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+# Source networking configuration.
+. /etc/sysconfig/network
+
+# Check that networking is up.
+[ ${NETWORKING} = "no" ] && exit 0
+
+# Check that smb.conf exists.
+[ -f /etc/smb.conf ] || exit 0
+
+# See how we were called.
+case "$1" in
+  start)
+	echo -n "Starting SMB services: "
+	daemon smbd -D 	
+	daemon nmbd -D 
+	echo
+	touch /var/lock/subsys/smb
+	;;
+  stop)
+	echo -n "Shutting down SMB services: "
+	killproc smbd
+	killproc nmbd
+	rm -f /var/lock/subsys/smb
+	echo ""
+	;;
+  status)
+	status smbd
+	status nmbd
+	;;
+  restart)
+	echo -n "Restarting SMB services: "
+	$0 stop
+	$0 start
+	echo "done."
+	;;
+  *)
+	echo "Usage: smb {start|stop|restart|status}"
+	exit 1
+esac
+

packaging/PHT/TurboLinux/smbadduser

@@ -0,0 +1,73 @@
+#!/bin/csh
+#
+# smbadduser - Written by Mike Zakharoff
+#
+unalias *
+set path = ($path)
+
+set smbpasswd = /etc/smbpasswd
+set user_map  = /etc/smbusers
+#
+# Set to site specific passwd command
+#
+set passwd    = "cat /etc/passwd"
+#set passwd    = "niscat passwd.org_dir"
+#set passwd    = "ypcat passwd"
+
+set line = "----------------------------------------------------------"
+if ($#argv == 0) then
+	echo $line
+	echo "Written: Mike Zakharoff email: michael.j.zakharoff@boeing.com"
+	echo ""
+	echo "   1) Updates $smbpasswd"
+	echo "   2) Updates $user_map"
+	echo "   3) Executes smbpasswd for each new user"
+	echo ""
+	echo "smbadduser unixid:ntid unixid:ntid ..."
+	echo ""
+	echo "Example: smbadduser zak:zakharoffm johns:smithj"
+	echo $line
+	exit 1
+endif
+
+touch $smbpasswd $user_map
+set new  = ()
+foreach one ($argv)
+	echo $one | grep ':' >& /dev/null
+	if ($status != 0) then
+		echo "ERROR: Must use unixid:ntid like -> zak:zakharoffm"
+		continue
+	endif
+	set unix = `echo $one | awk -F: '{print $1}'`
+	set ntid = `echo $one | awk -F: '{print $2}'`
+
+	set usr = `eval $passwd | awk -F: '$1==USR {print $1}' USR=$unix`
+	if ($#usr != 1) then
+		echo "ERROR: $unix Not in passwd database SKIPPING..."
+		continue
+	endif
+        set tmp = `cat $smbpasswd | awk -F: '$1==USR {print $1}' USR=$unix`
+	if ($#tmp != 0) then
+		echo "ERROR: $unix is already in $smbpasswd SKIPPING..."
+		continue
+	endif
+
+	echo "Adding: $unix to $smbpasswd"
+	eval $passwd | \
+	awk -F: '$1==USR { \
+	printf( "%s:%s:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:%s:%s:%s\n", $1, $3, $5, $6, $7) }' USR=$unix >> $smbpasswd
+	if ($unix != $ntid) then
+		echo "Adding: {$unix = $ntid} to $user_map"
+		echo "$unix = $ntid" >> $user_map
+	endif
+	set new = ($new $unix)
+end
+
+#
+# Enter password for new users
+#
+foreach one ($new)
+	echo $line
+	echo "ENTER password for $one"
+	smbpasswd $one
+end

packaging/PHT/TurboLinux/smbprint

@@ -0,0 +1,77 @@
+#!/bin/sh -x
+
+# This script is an input filter for printcap printing on a unix machine. It
+# uses the smbclient program to print the file to the specified smb-based 
+# server and service.
+# For example you could have a printcap entry like this
+#
+# smb:lp=/dev/null:sd=/usr/spool/smb:sh:if=/usr/local/samba/smbprint
+#
+# which would create a unix printer called "smb" that will print via this 
+# script. You will need to create the spool directory /usr/spool/smb with
+# appropriate permissions and ownerships for your system.
+
+# Set these to the server and service you wish to print to 
+# In this example I have a WfWg PC called "lapland" that has a printer 
+# exported called "printer" with no password.
+
+#
+# Script further altered by hamiltom@ecnz.co.nz (Michael Hamilton)
+# so that the server, service, and password can be read from 
+# a /var/spool/lpd/PRINTNAME/.config file.
+#
+# In order for this to work the /etc/printcap entry must include an 
+# accounting file (af=...):
+#
+#   cdcolour:\
+#	:cm=CD IBM Colorjet on 6th:\
+#	:sd=/var/spool/lpd/cdcolour:\
+#	:af=/var/spool/lpd/cdcolour/acct:\
+#	:if=/usr/local/etc/smbprint:\
+#	:mx=0:\
+#	:lp=/dev/null:
+#
+# The /usr/var/spool/lpd/PRINTNAME/.config file should contain:
+#   server=PC_SERVER
+#   service=PR_SHARENAME
+#   password="password"
+#
+# E.g.
+#   server=PAULS_PC
+#   service=CJET_371
+#   password=""
+
+#
+# Debugging log file, change to /dev/null if you like.
+#
+# logfile=/tmp/smb-print.log
+logfile=/dev/null
+
+
+#
+# The last parameter to the filter is the accounting file name.
+#   Extract the directory name from the file name.
+#   Concat this with /.config to get the config file.
+#
+eval acct_file=\${$#}
+spool_dir=`dirname $acct_file` 
+config_file=$spool_dir/.config
+
+# Should read the following variables set in the config file:
+#   server
+#   service
+#   password
+eval `cat $config_file`
+
+#
+# Some debugging help, change the >> to > if you want to same space.
+#
+echo "server $server, service $service" >> $logfile
+
+(
+# NOTE You may wish to add the line `echo translate' if you want automatic
+# CR/LF translation when printing.
+#       echo translate
+	echo "print -"
+	cat
+) | /usr/bin/smbclient "\\\\$server\\$service" $password -U $server -N -P >> $logfile

packaging/PHT/TurboLinux/smbusers

@@ -0,0 +1,3 @@
+# Unix_name = SMB_name1 SMB_name2 ...
+root = administrator admin
+nobody = guest pcguest smbguest

packaging/PHT/TurboLinux/smbw.patch

@@ -0,0 +1,10 @@
+--- samba-2.0.0/source/smbwrapper/smbsh.in.orig	Mon Oct  5 22:37:01 1998
++++ samba-2.0.0/source/smbwrapper/smbsh.in	Mon Oct  5 22:37:51 1998
+@@ -1,6 +1,6 @@
+ #! /bin/sh
+ 
+-SMBW_LIBDIR=${SMBW_LIBDIR-@builddir@/smbwrapper}
++SMBW_LIBDIR=${SMBW_LIBDIR-/usr/bin}
+ 
+ if [ ! -f ${SMBW_LIBDIR}/smbwrapper.so ]; then
+     echo You need to set LIBDIR in smbsh