diff --git a/docs/htmldocs/smbcacls.1.html b/docs/htmldocs/smbcacls.1.html index a48330c5b6b..b7a048a1f3e 100644 --- a/docs/htmldocs/smbcacls.1.html +++ b/docs/htmldocs/smbcacls.1.html @@ -17,7 +17,7 @@

NAME

- smbcacls - Set or get ACLs on an NT file + smbcacls - Set or get ACLs on an NT file or directory

SYNOPSIS

@@ -33,24 +33,27 @@ SMB file shares.

OPTIONS

-

The following options are available to the smbcacls program: +

The following options are available to the smbcacls program. The +format of ACLs is described in the section ACL FORMAT

-A acls
-

Add the ACLs specified to the ACL list. +

Add the ACLs specified to the ACL list. Existing access control entries +are unchanged.

-M acls

Modify the mask value (permissions) for the ACLs specified on the command -line. An error will be printed if the ACL specified is not already present -in the ACL list +line. An error will be printed for each ACL specified that was not already +present in the ACL list.

-D acls
-

Delete any ACLs specfied on the command line. An error is printed if any -of the ACLs specified are not present in the ACL list. +

Delete any ACLs specfied on the command line. An error will be printed for +each ACL specified that was not already present in the ACL list.

-S acls
-

This command deletes the current ACLs for the file or directory and -replaces them with the ACLs specified on the command line. +

This command sets the ACLs on the file with only the ones specified on the +command line. All other ACLs are erased. Note that the ACL specified must +contain at least a revision, type, owner and group for the call to succeed.

-U username

Specifies a username used to connect to the specified service. The @@ -68,6 +71,58 @@ format.

-h

Print usage information on the smbcacls program

+

+

ACL FORMAT

+ +

The format of an ACL is one or more ACL entries separated by either spaces, +commas or newlines. An ACL entry is one of the following: +

+
+REVISION:<revision number>
+OWNER:<sid or name>
+GROUP:<sid or name>
+ACL:<sid or name>:<type>/<flags>/<mask>
+
+ +

The revision of the ACL specifies the internal Windows NT ACL revision for +the security descriptor. If not specified it defaults to 1. +

The owner and group specify the owner and group sids for the object. If a +SID in the format S-1-x-y-z is specified this is used, otherwise +the name specified is resolved using the server on which the file or +directory resides. +

ACLs specify permissions granted to the SID. This SID again can be +specified in S-1-x-y-z format or as a name in which case it is resolved +against the server on which the file or directory resides. The type, flags +and mask values determine the type of access granted to the SID. +

The type can be either 0 or 1 corresponding to ALLOWED or DENIED access to +the SID. The flags values are generally zero for file ACLs and either 9 or +2 for directory ACLs. Some common flags are: +

+
+#define SEC_ACE_FLAG_OBJECT_INHERIT     	0x1
+#define SEC_ACE_FLAG_CONTAINER_INHERIT  	0x2
+#define SEC_ACE_FLAG_NO_PROPAGATE_INHERIT       0x4
+#define SEC_ACE_FLAG_INHERIT_ONLY       	0x8
+
+ +

The mask is a value which expresses the access right granted to +the SID. It can be given as a hexadecimal value or by using one of the +following text strings which map to the NT file permissions of the same +name. +

+

R Allow read access +

W Allow write access +

X Execute permission on the object +

D Delete the object +

P Change permissions +

O Take ownership +

+

The following combined permissions can be specified: +

+

READ Equivalent to RX permissions +

CHANGE Equivalent to RXWD permissions +

FULL Equivalent to RWXDPO permissions +

EXIT STATUS

diff --git a/docs/manpages/smbcacls.1 b/docs/manpages/smbcacls.1 index 69e9a92ef4b..52b6a6ce3f4 100644 --- a/docs/manpages/smbcacls.1 +++ b/docs/manpages/smbcacls.1 @@ -1,7 +1,7 @@ .TH "smbcacls " "1" "3 Dec 2000" "Samba" "SAMBA" .PP .SH "NAME" -smbcacls \- Set or get ACLs on an NT file +smbcacls \- Set or get ACLs on an NT file or directory .PP .SH "SYNOPSIS" .PP @@ -17,28 +17,31 @@ SMB file shares\&. .PP .SH "OPTIONS" .PP -The following options are available to the \fBsmbcacls\fP program: +The following options are available to the \fBsmbcacls\fP program\&. The +format of ACLs is described in the section ACL FORMAT .PP .IP .IP "\fB-A acls\fP" .IP -Add the ACLs specified to the ACL list\&. +Add the ACLs specified to the ACL list\&. Existing access control entries +are unchanged\&. .IP .IP "\fB-M acls\fP" .IP Modify the mask value (permissions) for the ACLs specified on the command -line\&. An error will be printed if the ACL specified is not already present -in the ACL list +line\&. An error will be printed for each ACL specified that was not already +present in the ACL list\&. .IP .IP "\fB-D acls\fP" .IP -Delete any ACLs specfied on the command line\&. An error is printed if any -of the ACLs specified are not present in the ACL list\&. +Delete any ACLs specfied on the command line\&. An error will be printed for +each ACL specified that was not already present in the ACL list\&. .IP .IP "\fB-S acls\fP" .IP -This command deletes the current ACLs for the file or directory and -replaces them with the ACLs specified on the command line\&. +This command sets the ACLs on the file with only the ones specified on the +command line\&. All other ACLs are erased\&. Note that the ACL specified must +contain at least a revision, type, owner and group for the call to succeed\&. .IP .IP "\fB-U username\fP" .IP @@ -60,6 +63,88 @@ format\&. Print usage information on the \fBsmbcacls\fP program .IP .PP +.SH "ACL FORMAT" +.PP +The format of an ACL is one or more ACL entries separated by either spaces, +commas or newlines\&. An ACL entry is one of the following: +.PP + +.nf + + +REVISION: +OWNER: +GROUP: +ACL::// +.fi + + +.PP +The revision of the ACL specifies the internal Windows NT ACL revision for +the security descriptor\&. If not specified it defaults to 1\&. +.PP +The owner and group specify the owner and group sids for the object\&. If a +SID in the format \f(CWS-1-x-y-z\fP is specified this is used, otherwise +the name specified is resolved using the server on which the file or +directory resides\&. +.PP +ACLs specify permissions granted to the SID\&. This SID again can be +specified in \f(CWS-1-x-y-z\fP format or as a name in which case it is resolved +against the server on which the file or directory resides\&. The type, flags +and mask values determine the type of access granted to the SID\&. +.PP +The type can be either 0 or 1 corresponding to ALLOWED or DENIED access to +the SID\&. The flags values are generally zero for file ACLs and either 9 or +2 for directory ACLs\&. Some common flags are: +.PP + +.nf + + +#define SEC_ACE_FLAG_OBJECT_INHERIT 0x1 +#define SEC_ACE_FLAG_CONTAINER_INHERIT 0x2 +#define SEC_ACE_FLAG_NO_PROPAGATE_INHERIT 0x4 +#define SEC_ACE_FLAG_INHERIT_ONLY 0x8 +.fi + + +.PP +The mask is a value which expresses the access right granted to +the SID\&. It can be given as a hexadecimal value or by using one of the +following text strings which map to the NT file permissions of the same +name\&. +.PP +.IP +.IP "" +\f(CWR\fP Allow read access +.IP +.IP "" +\f(CWW\fP Allow write access +.IP +.IP "" +\f(CWX\fP Execute permission on the object +.IP +.IP "" +\f(CWD\fP Delete the object +.IP +.IP "" +\f(CWP\fP Change permissions +.IP +.IP "" +\f(CWO\fP Take ownership +.IP +.PP +The following combined permissions can be specified: +.PP +.IP +.IP "" +\f(CWREAD\fP Equivalent to \f(CWRX\fP permissions +.IP "" +\f(CWCHANGE\fP Equivalent to \f(CWRXWD\fP permissions +.IP "" +\f(CWFULL\fP Equivalent to \f(CWRWXDPO\fP permissions +.IP +.PP .SH "EXIT STATUS" .PP .SH "AUTHOR" diff --git a/docs/yodldocs/smbcacls.1.yo b/docs/yodldocs/smbcacls.1.yo index d95ca6d387e..249042ce2cb 100644 --- a/docs/yodldocs/smbcacls.1.yo +++ b/docs/yodldocs/smbcacls.1.yo @@ -1,7 +1,7 @@ manpage(smbcacls htmlcommand((1)))(1)(3 Dec 2000)(Samba)(SAMBA) label(NAME) -manpagename(smbcacls)(Set or get ACLs on an NT file) +manpagename(smbcacls)(Set or get ACLs on an NT file or directory ) label(SYNOPSIS) manpagesynopsis() @@ -20,33 +20,36 @@ SMB file shares. label(OPTIONS) manpageoptions() -The following options are available to the bf(smbcacls) program: +The following options are available to the bf(smbcacls) program. The +format of ACLs is described in the section link(ACL FORMAT)(ACLFORMAT) startdit() label(minusA) dit(bf(-A acls)) -Add the ACLs specified to the ACL list. +Add the ACLs specified to the ACL list. Existing access control entries +are unchanged. label(minusM) dit(bf(-M acls)) Modify the mask value (permissions) for the ACLs specified on the command -line. An error will be printed if the ACL specified is not already present -in the ACL list +line. An error will be printed for each ACL specified that was not already +present in the ACL list. label(minusD) dit(bf(-D acls)) -Delete any ACLs specfied on the command line. An error is printed if any -of the ACLs specified are not present in the ACL list. +Delete any ACLs specfied on the command line. An error will be printed for +each ACL specified that was not already present in the ACL list. label(minusS) dit(bf(-S acls)) -This command deletes the current ACLs for the file or directory and -replaces them with the ACLs specified on the command line. +This command sets the ACLs on the file with only the ones specified on the +command line. All other ACLs are erased. Note that the ACL specified must +contain at least a revision, type, owner and group for the call to succeed. label(minusU) dit(bf(-U username)) @@ -72,7 +75,73 @@ Print usage information on the bf(smbcacls) program enddit() -label(EXIT STATUS) +label(ACLFORMAT) +manpagesection(ACL FORMAT) + +The format of an ACL is one or more ACL entries separated by either spaces, +commas or newlines. An ACL entry is one of the following: + +verb( +REVISION: +OWNER: +GROUP: +ACL:://) + +The revision of the ACL specifies the internal Windows NT ACL revision for +the security descriptor. If not specified it defaults to 1. + +The owner and group specify the owner and group sids for the object. If a +SID in the format tt(S-1-x-y-z) is specified this is used, otherwise +the name specified is resolved using the server on which the file or +directory resides. + +ACLs specify permissions granted to the SID. This SID again can be +specified in tt(S-1-x-y-z) format or as a name in which case it is resolved +against the server on which the file or directory resides. The type, flags +and mask values determine the type of access granted to the SID. + +The type can be either 0 or 1 corresponding to ALLOWED or DENIED access to +the SID. The flags values are generally zero for file ACLs and either 9 or +2 for directory ACLs. Some common flags are: + +verb( +#define SEC_ACE_FLAG_OBJECT_INHERIT 0x1 +#define SEC_ACE_FLAG_CONTAINER_INHERIT 0x2 +#define SEC_ACE_FLAG_NO_PROPAGATE_INHERIT 0x4 +#define SEC_ACE_FLAG_INHERIT_ONLY 0x8) + +The mask is a value which expresses the access right granted to +the SID. It can be given as a hexadecimal value or by using one of the +following text strings which map to the NT file permissions of the same +name. + +startdit() + +dit() tt(R) Allow read access + +dit() tt(W) Allow write access + +dit() tt(X) Execute permission on the object + +dit() tt(D) Delete the object + +dit() tt(P) Change permissions + +dit() tt(O) Take ownership + +enddit() + +The following combined permissions can be specified: + +startdit() + +dit() tt(READ) Equivalent to tt(RX) permissions +dit() tt(CHANGE) Equivalent to tt(RXWD) permissions +dit() tt(FULL) Equivalent to tt(RWXDPO) permissions + +enddit() + +label(EXITSTATUS) manpagesection(EXIT STATUS) label(AUTHOR)