packaging/Debian: Remove outdated Debian package sources and instead refer to

Debian.org and SerNet packages.

packaging/Debian/README

@@ -1,78 +1,23 @@
-Building Samba Packages for Debian GNU/Linux
---------------------------------------------
+Debian.org packages
+-------------------
 
-Building Debian packages is not as hard as some people might think.
-The following instructions will allow you to build your own Samba
-Debian packages. These instructions and the files in packaging/Debian/
-should be current as of Samba 3.0.2, and allow you to build Debian
-packages for Debian unstable (so you need some development packages
-available only in Debian unstable.) If you are using something newer
-than 3.0.2 you might want to try to follow the instructions to see if
-patches apply cleanly. If some patches don't apply cleanly please e-mail
-samba@packages.debian.org since we might have fixed patches that we have
-not yet integrated into upstream Samba.
+Samba is packaged for Debian and Debian-derived distributions by the Debian 
+Samba packaging team. 
 
-We try to maintain as much compatibility with previous releases
-of Debian as possible, so it is possible that the files in
-packaging/Debian/ can also be used to build Samba Debian packages for
-other Debian releases. However, sometimes this is just not possible
-because we need to use stuff that is only available on Debian unstable.
+The current sources for the packages in unstable can be found in Subversion 
+at:
 
-Instructions
-------------
+ svn://svn.debian.org/pkg-samba/trunk/samba
 
-If you want to build Samba packages for Debian and you just want to use
-upstream sources, i.e. you don't want to wait for us to put official
-packages out, or you want packages for a Debian version for which we
-don't provide deb's, or you don't want to use official packages, or
-you want to add --this-cool-switch to configure, or whatever, follow
-these instructions:
+The current sources for particular Debian releases as well as the 
+"experimental" branch can be found at:
 
-0) Make sure you have the following packages installed (in addition
-to the normal Debian development packages -- dpkg-dev, libc6-dev,
-devscripts, etc.):
+ svn://svn.debian.org/pkg-samba/branches/<name>/samba
 
-  autoconf
-  debhelper (>= 4.1.13)
-  libpam0g-dev
-  libreadline4-dev
-  libcupsys2-dev
-  libacl1-dev, libacl1 (>= 2.2.11-1)
-  libkrb5-dev
-  libldap2-dev
-  po-debconf
-  python2.3-dev
-
-  Notes regarding the packages required to build Samba Debian packages:
-
-  * The libcupsys2-dev is not available in Debian Potato (Debian 2.2).
-    That's fine; the configure script won't detect CUPS support and the
-    resulting binaries won't support CUPS.
-
-  * The list above is current as of samba-3.0.0rc2, but it can get
-    out of date. The best way to check what packages are required to
-    build the samba packages on Debian is to look for the Build-Depends:
-    field in the file debian/control.
-
-1) cd samba[-<version>]. For example, "cd samba-3.0.2".
-2) cp -a packaging/Debian/debian/ .
-  It's important that you copy instead of symlink because the build
-  tools in Potato have a problem that prevents the build to work with
-  a symlink. If you are running a recent Debian distribution you don't
-  have to copy the directory and you can use a symlink instead:
-  "ln -s packaging/Debian/debian/ ."
-3) dch -i (this is completely optional - only do it if you understand
-   Debian version numbers! Don't complain later if you can't upgrade
-   to official versions of the Samba packages for Debian.)
-  - Edit the changelog and make sure the version is right. For example,
-    for Samba 3.0.2, the version number should something like 3.0.2-0.1.
-4) Run 'fakeroot debian/rules binary'.
-5) That's it. Your new packages should be in ../. Install with dpkg.
-
-Please e-mail pkg-samba-maint@lists.debian.org with comments, questions or
-suggestions. Please talk to us and not to the Samba Team. They have
-better things to do and know nothing about the Debian packaging system.
-
-Eloy A. Paris <peloy@debian.org>
-Steve Langasek <vorlon@debian.org>
+SerNet packages
+---------------
 
+SerNet provides Debian packages of the latest Samba versions for various 
+Debian releases as part of EnterpriseSamba. See 
+http://www.enterprisesamba.org/index.php?id=56 for more information about the 
+packages and how to install them.

packaging/Debian/debian-sarge/README.build

@@ -1,397 +0,0 @@
-From: Steve Langasek <vorlon@netexpress.net>
-To: "Eloy A. Paris" <eloy.paris@usa.net>
-Date: Thu, 23 Aug 2001 21:20:05 -0500 (CDT)
-Subject: Re: autobuilder failure on arm for samba-2.2.1a-3
-In-Reply-To: <20010823100906.A1092@antenas>
-Message-ID: <Pine.LNX.4.30.0108231744090.11071-100000@tennyson.netexpress.net>
-MIME-Version: 1.0
-Content-Type: TEXT/PLAIN; charset=US-ASCII
-
-On Thu, 23 Aug 2001, Eloy A. Paris wrote:
-
-> On Wed, Aug 22, 2001 at 03:01:01PM -0500, Steve Langasek wrote:
-
-> > Hmm.  Maybe the thing to do is to focus on getting config.cache (not log,
-> > cache) support into the package.  Issues like this are frequent enough with
-> > Samba, and the configure tests add enough time to the build process, that I
-> > think there'd be much benefit in being able to step past a lot of these.
-
-> Uhhmmm... I don't know, I guess I don't like much the idea of
-> maintaining a config.cache. It looks like extra work plus a
-> compilation process that is "synthetic" or atificial. What happens if
-> the Samba Team adds a new test, or modifies the configure script, will
-> the config.cache pick those up?
-
-> In any case, you are the expert, so if you think that's the way to go,
-> and the burden far exceeds the problems we have right now I say let's
-> go for it. I am not well versed on autoconf and the configure process,
-> that's all...
-
-Well, I'll attach my work to the bottom of this message and let you judge it
-for yourself.
-
-The config.cache I'm trying to generate here is not equivalent to what
-a configure script outputs.  The only values I'm including are those which 1)
-are no-brainers on any glibc-based platform, 2) are questions we need to force
-a particular value for regardless of the kernel being built against, or 3) are
-questions about specific bizarre features of proprietary Unices that we'll
-always get an answer of 'no' to.
-
-I've removed all of the config.cache variables related to headers, or to
-checks for particular libraries; I think it's pretty safe to assert that glibc
-provides basic C functions like select(), setenv(), and waitpid() on all our
-build targets, but I think it's less safe to assert that they'll always be
-provided by particular header files.
-
-So the config.cache won't automatically be updated with answers to new
-configure tests, but it also doesn't need to in order to be useful.  There's
-really only a handful of variables in there that we /need/ in order to
-guarantee correctly-built packages, and if you want to leave out everything
-else, that's perfectly ok too.  Everything from the fifth stanza on down is
-just a build-time speed-up for some of the slower architectures.  Well, it
-also has the fringe benefit that the packages will FAIL to build if someone
-tries rebuilding for a really bizarre (non-Linux, non-glibc) architecture.  I
-see that as a plus :), you may disagree, but in any case my next trick would
-be to add a global variable developers can set to bypass the provided
-config.cache.
-
-
-It is a little artificial, but the whole point of .debs is to be able to build
-binaries in a controlled environment.  Right now, we don't really have control
-over what happens in the autobuilders.  We have even /less/ control over what
-happens in a stable release:  it's been two weeks now since I built binaries
-for bug #94380, and they haven't been uploaded to security.d.o yet.  I'm
-guessing they won't be uploaded until Wichert is back from vacation, either --
-which is fine, but it would be nice if we didn't have to worry about
-mis-builds by the security team, or about putting the security team to extra
-trouble after the fact to get packages fixed.
-
-With a pre-loaded config.cache, we can ensure that bugs of this kind don't
-happen in woody.  We can take the arm autobuilder problem into our own hands,
-and not have to worry about quirkiness in the build environment.  We can even
-close bug #109773, since we no longer have to worry about detecting the
-setuid() routines.
-
-
-So to me, it definitely seems worth it.  But you're the maintainer, and I
-won't ask you to put anything in the package that you're not comfortable with.
-
-
-> By the way, I think I remember someone was able to build 2.2.x succesfully on
-> the ARM. If this is the case, could it be that there's something weird
-> with Phillip's setup?
-
-It could be.  There are arm packages for 2.2.1a-1, so at /some/ point the
-autobuilder was able to pass the locking test.
-
-
-> P.S. How did you know about the ARM build problems? I don't see any
-> bugs about this...
-
-<http://ftp-master.debian.org/testing/>, follow the links for samba...  The
-exact reference for the arm autobuilder is at
-<http://buildd.armlinux.org/~buildd/build.php?pkg=samba&ver=2.2.1a-4&arch=arm>.
-
-Regards,
-Steve Langasek
-postmodern programmer
-
-
-diff -uNrw samba-2.2.1a-bak/debian/changelog samba-2.2.1a/debian/changelog
---- samba-2.2.1a-bak/debian/changelog	Thu Aug 23 10:27:54 2001
-+++ samba-2.2.1a/debian/changelog	Thu Aug 23 10:28:08 2001
-@@ -1,3 +1,12 @@
-+samba (2.2.1a-4.1) unstable; urgency=low
-+
-+  * Fix up the build system to avoid needing to run configure as root to
-+    answer questions we already know the answers to.
-+  * In the process, make surprising progress towards being able to
-+    cross-compile the samba packages.
-+
-+ -- Steve Langasek <vorlon@debian.org>  Wed, 22 Aug 2001 23:35:00 -0500
-+
- samba (2.2.1a-4) unstable; urgency=low
-
-   * Fixed typo in smbmount's mount page.
-diff -uNrw samba-2.2.1a-bak/debian/config.cache samba-2.2.1a/debian/config.cache
---- samba-2.2.1a-bak/debian/config.cache	Wed Dec 31 18:00:00 1969
-+++ samba-2.2.1a/debian/config.cache	Thu Aug 23 10:28:08 2001
-@@ -0,0 +1,231 @@
-+#
-+# 22 August 2001  Steve Langasek <vorlon@debian.org>
-+#
-+# This file is a shell script that caches the results of configure
-+# tests run on this system so they can be shared between configure
-+# scripts and configure runs.  It is not useful on other systems.
-+# If it contains results you don't want to keep, you may remove or edit it.
-+#
-+# By default, configure uses ./config.cache as the cache file,
-+# creating it if it does not exist already.  You can give configure
-+# the --cache-file=FILE option to use a different cache file; that is
-+# what configure does when it calls configure scripts in
-+# subdirectories, so they share the cache.
-+# Giving --cache-file=/dev/null disables caching, for debugging configure.
-+# config.status only pays attention to the cache file if you give it the
-+# --recheck option to rerun configure.
-+#
-+#
-+# This config.cache file contains a list of acceptable autoconf
-+# values which can be used in compiling Samba for Debian woody/sid.
-+#
-+# Autoconf sorts options alphabetically in its output.  This file
-+# groups options logically.
-+
-+
-+# Load any architecture-specific settings
-+if [ -n "$DEB_HOST_GNU_TYPE" \
-+     -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then
-+	. ../debian/config.cache.${DEB_HOST_GNU_TYPE}
-+fi
-+
-+
-+# This is at the top because it's most in need of regular tweaking.
-+# These are options which are supported on 2.4 kernels, but not on 2.2
-+# kernels.
-+
-+samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no}
-+samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no}
-+samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no}
-+
-+
-+# These are present in 2.2 kernels, but not in 2.0...
-+
-+samba_cv_have_setresuid=${samba_cv_have_setresuid=yes}
-+samba_cv_have_setresgid=${samba_cv_have_setresgid=yes}
-+samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes}
-+
-+
-+# POSIX ACL support not present in Linux 2.2; not allowed in the
-+# Debian packages, even if present on the build machine.
-+
-+ac_cv_header_sys_acl_h=${ac_cv_header_sys_acl_h=no}
-+
-+
-+# Various basic libc/compiler stuff that it's blindingly obvious that
-+# Linux supports (now watch me get bitten for saying that)
-+
-+ac_cv_c_const=${ac_cv_c_const=yes}
-+ac_cv_c_inline=${ac_cv_c_inline=inline}
-+samba_cv_volatile=${samba_cv_volatile=yes}
-+ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes}
-+ac_cv_func_bzero=${ac_cv_func_bzero=yes}
-+ac_cv_func_chmod=${ac_cv_func_chmod=yes}
-+ac_cv_func_chown=${ac_cv_func_chown=yes}
-+ac_cv_func_chroot=${ac_cv_func_chroot=yes}
-+ac_cv_func_connect=${ac_cv_func_connect=yes}
-+ac_cv_func_dup2=${ac_cv_func_dup2=yes}
-+ac_cv_func_execl=${ac_cv_func_execl=yes}
-+ac_cv_func_fchmod=${ac_cv_func_fchmod=yes}
-+ac_cv_func_fchown=${ac_cv_func_fchown=yes}
-+ac_cv_func_fstat=${ac_cv_func_fstat=yes}
-+ac_cv_func_fsync=${ac_cv_func_fsync=yes}
-+ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes}
-+ac_cv_func_getcwd=${ac_cv_func_getcwd=yes}
-+ac_cv_func_getgrent=${ac_cv_func_getgrent=yes}
-+ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes}
-+ac_cv_func_getspnam=${ac_cv_func_getspnam=yes}
-+ac_cv_func_glob=${ac_cv_func_glob=yes}
-+ac_cv_func_grantpt=${ac_cv_func_grantpt=yes}
-+ac_cv_func_initgroups=${ac_cv_func_initgroups=yes}
-+ac_cv_func_llseek=${ac_cv_func_llseek=yes}
-+ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes}
-+ac_cv_func_memmove=${ac_cv_func_memmove=yes}
-+ac_cv_func_memset=${ac_cv_func_memset=yes}
-+ac_cv_func_mktime=${ac_cv_func_mktime=yes}
-+ac_cv_func_pipe=${ac_cv_func_pipe=yes}
-+ac_cv_func_poll=${ac_cv_func_poll=yes}
-+ac_cv_func_pread=${ac_cv_func_pread=yes}
-+ac_cv_func_pwrite=${ac_cv_func_pwrite=yes}
-+ac_cv_func_rand=${ac_cv_func_rand=yes}
-+ac_cv_func_random=${ac_cv_func_random=yes}
-+ac_cv_func_readlink=${ac_cv_func_readlink=yes}
-+ac_cv_func_rename=${ac_cv_func_rename=yes}
-+ac_cv_func_select=${ac_cv_func_select=yes}
-+ac_cv_func_setenv=${ac_cv_func_setenv=yes}
-+ac_cv_func_setgroups=${ac_cv_func_setgroups=yes}
-+ac_cv_func_setsid=${ac_cv_func_setsid=yes}
-+ac_cv_func_sigaction=${ac_cv_func_sigaction=yes}
-+ac_cv_func_sigblock=${ac_cv_func_sigblock=yes}
-+ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes}
-+ac_cv_func_snprintf=${ac_cv_func_snprintf=yes}
-+ac_cv_func_srand=${ac_cv_func_srand=yes}
-+ac_cv_func_srandom=${ac_cv_func_srandom=yes}
-+ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes}
-+ac_cv_func_strchr=${ac_cv_func_strchr=yes}
-+ac_cv_func_strdup=${ac_cv_func_strdup=yes}
-+ac_cv_func_strerror=${ac_cv_func_strerror=yes}
-+ac_cv_func_strftime=${ac_cv_func_strftime=yes}
-+ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes}
-+ac_cv_func_strtoul=${ac_cv_func_strtoul=yes}
-+ac_cv_func_symlink=${ac_cv_func_symlink=yes}
-+ac_cv_func_usleep=${ac_cv_func_usleep=yes}
-+ac_cv_func_utime=${ac_cv_func_utime=yes}
-+ac_cv_func_utimes=${ac_cv_func_utimes=yes}
-+ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes}
-+ac_cv_func_waitpid=${ac_cv_func_waitpid=yes}
-+ac_cv_type_ino_t=${ac_cv_type_ino_t=yes}
-+ac_cv_type_mode_t=${ac_cv_type_mode_t=yes}
-+ac_cv_type_pid_t=${ac_cv_type_pid_t=yes}
-+ac_cv_type_size_t=${ac_cv_type_size_t=yes}
-+ac_cv_type_uid_t=${ac_cv_type_uid_t=yes}
-+samba_cv_socklen_t=${samba_cv_socklen_t=yes}
-+
-+# Yes, we know Linux supports fcntl locking.  Just ignore
-+# any errors caused by building on an NFS mount.
-+samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes}
-+
-+
-+# smbwrapper doesn't work because the glibc maintainers don't want
-+# to support transparent userland VFS.  We might as well preempt
-+# any checks for shadowed symbols that are only useful for smbwrapper.
-+
-+ac_cv_func___acl=${ac_cv_func___acl=no}
-+ac_cv_func__acl=${ac_cv_func__acl=no}
-+ac_cv_func___chdir=${ac_cv_func___chdir=no}
-+ac_cv_func__chdir=${ac_cv_func__chdir=no}
-+ac_cv_func___close=${ac_cv_func___close=no}
-+ac_cv_func__close=${ac_cv_func__close=no}
-+ac_cv_func___closedir=${ac_cv_func___closedir=no}
-+ac_cv_func__closedir=${ac_cv_func__closedir=no}
-+ac_cv_func___dup=${ac_cv_func___dup=no}
-+ac_cv_func__dup=${ac_cv_func__dup=no}
-+ac_cv_func___dup2=${ac_cv_func___dup2=no}
-+ac_cv_func__dup2=${ac_cv_func__dup2=no}
-+ac_cv_func___facl=${ac_cv_func___facl=no}
-+ac_cv_func__facl=${ac_cv_func__facl=no}
-+ac_cv_func___fchdir=${ac_cv_func___fchdir=no}
-+ac_cv_func__fchdir=${ac_cv_func__fchdir=no}
-+ac_cv_func___fcntl=${ac_cv_func___fcntl=no}
-+ac_cv_func__fcntl=${ac_cv_func__fcntl=no}
-+ac_cv_func___fork=${ac_cv_func___fork=no}
-+ac_cv_func__fork=${ac_cv_func__fork=no}
-+ac_cv_func___fstat=${ac_cv_func___fstat=no}
-+ac_cv_func__fstat=${ac_cv_func__fstat=no}
-+ac_cv_func___fstat64=${ac_cv_func___fstat64=no}
-+ac_cv_func__fstat64=${ac_cv_func__fstat64=no}
-+ac_cv_func___fxstat=${ac_cv_func___fxstat=no}
-+ac_cv_func___getcwd=${ac_cv_func___getcwd=no}
-+ac_cv_func__getcwd=${ac_cv_func__getcwd=no}
-+ac_cv_func___getdents=${ac_cv_func___getdents=no}
-+ac_cv_func__getdents=${ac_cv_func__getdents=no}
-+ac_cv_func___llseek=${ac_cv_func___llseek=no}
-+ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no}
-+ac_cv_func__llseek=${ac_cv_func__llseek=no}
-+ac_cv_func___lseek=${ac_cv_func___lseek=no}
-+ac_cv_func__lseek=${ac_cv_func__lseek=no}
-+ac_cv_func___lstat=${ac_cv_func___lstat=no}
-+ac_cv_func__lstat=${ac_cv_func__lstat=no}
-+ac_cv_func___lstat64=${ac_cv_func___lstat64=no}
-+ac_cv_func__lstat64=${ac_cv_func__lstat64=no}
-+ac_cv_func___lxstat=${ac_cv_func___lxstat=no}
-+ac_cv_func___open=${ac_cv_func___open=no}
-+ac_cv_func__open=${ac_cv_func__open=no}
-+ac_cv_func___open64=${ac_cv_func___open64=no}
-+ac_cv_func__open64=${ac_cv_func__open64=no}
-+ac_cv_func___opendir=${ac_cv_func___opendir=no}
-+ac_cv_func__opendir=${ac_cv_func__opendir=no}
-+ac_cv_func___pread=${ac_cv_func___pread=no}
-+ac_cv_func__pread=${ac_cv_func__pread=no}
-+ac_cv_func___pread64=${ac_cv_func___pread64=no}
-+ac_cv_func__pread64=${ac_cv_func__pread64=no}
-+ac_cv_func___pwrite=${ac_cv_func___pwrite=no}
-+ac_cv_func__pwrite=${ac_cv_func__pwrite=no}
-+ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no}
-+ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no}
-+ac_cv_func___read=${ac_cv_func___read=no}
-+ac_cv_func__read=${ac_cv_func__read=no}
-+ac_cv_func___readdir=${ac_cv_func___readdir=no}
-+ac_cv_func__readdir=${ac_cv_func__readdir=no}
-+ac_cv_func___readdir64=${ac_cv_func___readdir64=no}
-+ac_cv_func__readdir64=${ac_cv_func__readdir64=no}
-+ac_cv_func___seekdir=${ac_cv_func___seekdir=no}
-+ac_cv_func__seekdir=${ac_cv_func__seekdir=no}
-+ac_cv_func___stat=${ac_cv_func___stat=no}
-+ac_cv_func__stat=${ac_cv_func__stat=no}
-+ac_cv_func___stat64=${ac_cv_func___stat64=no}
-+ac_cv_func__stat64=${ac_cv_func__stat64=no}
-+ac_cv_func___telldir=${ac_cv_func___telldir=no}
-+ac_cv_func__telldir=${ac_cv_func__telldir=no}
-+ac_cv_func___write=${ac_cv_func___write=no}
-+ac_cv_func__write=${ac_cv_func__write=no}
-+ac_cv_func___xstat=${ac_cv_func___xstat=no}
-+
-+
-+
-+# Miscellaneous stuff that isn't, and shouldn't be, available
-+# in Debian.  Those interested in building debs for other systems may
-+# need to remove some of these defines.
-+
-+ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no}
-+ac_cv_func_crypt16=${ac_cv_func_crypt16=no}
-+ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no}
-+ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no}
-+ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no}
-+ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no}
-+ac_cv_func_rdchk=${ac_cv_func_rdchk=no}
-+ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no}
-+ac_cv_func_setgidx=${ac_cv_func_setgidx=no}
-+ac_cv_func_setluid=${ac_cv_func_setluid=no}
-+ac_cv_func_setpriv=${ac_cv_func_setpriv=no}
-+ac_cv_func_setuidx=${ac_cv_func_setuidx=no}
-+ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no}
-+ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no}
-+ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no}
-+ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no}
-+ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no}
-+ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no}
-+ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no}
-+ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no}
-+ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no}
-+ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no}
-diff -uNrw samba-2.2.1a-bak/debian/config.cache.alpha-linux samba-2.2.1a/debian/config.cache.alpha-linux
---- samba-2.2.1a-bak/debian/config.cache.alpha-linux	Wed Dec 31 18:00:00 1969
-+++ samba-2.2.1a/debian/config.cache.alpha-linux	Thu Aug 23 10:28:08 2001
-@@ -0,0 +1,12 @@
-+# 22 Aug 2001  Steve Langasek <vorlon@debian.org>
-+
-+# This file contains autoconf settings specific to the alpha-linux
-+# platform that should be preloaded when building for this architecture.
-+
-+
-+# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but
-+# Linux 2.4 does.  Ensure that packages compiled for woody remain
-+# compatible with 2.2 kernels, even if the build machine is running 2.4.
-+samba_cv_have_setresgid=${samba_cv_have_setresgid=no}
-+samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no}
-+samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes}
-diff -uNrw samba-2.2.1a-bak/debian/rules samba-2.2.1a/debian/rules
---- samba-2.2.1a-bak/debian/rules	Thu Aug 23 10:27:54 2001
-+++ samba-2.2.1a/debian/rules	Thu Aug 23 10:28:08 2001
-@@ -15,6 +15,14 @@
- # This has to be exported to make some magic below work.
- export DH_OPTIONS
-
-+# Set the host and build architectures for use with config.cache loading,
-+# cross-building, etc.
-+DEB_HOST_GNU_TYPE	:= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-+DEB_BUILD_GNU_TYPE	:= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-+
-+export DEB_HOST_GNU_TYPE
-+export DEB_BUILD_GNU_TYPE
-+
- BVARS = SMBLOGFILE=/var/log/smb NMBLOGFILE=/var/log/nmb
-
- DESTDIR=`pwd`/debian/samba
-@@ -48,8 +56,11 @@
- #     ./configure --with-fhs --prefix=/usr --sysconfdir=/etc \
- #        --localstatedir=/var
-
-+	if [ -f debian/config.cache ]; then \
-+		cp -f debian/config.cache source/config.cache; \
-+	fi
- #	[ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --exec-prefix=/usr --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp)
--	[ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass)
-+	[ -f source/Makefile ] || (cd source && ./configure --host=$(DEB_HOST_GNU_TYPE)-gnu --build=$(DEB_BUILD_GNU_TYPE)-gnu --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass)
-
- 	touch configure-stamp
-

packaging/Debian/debian-sarge/README.build-upstream

@@ -1,78 +0,0 @@
-Building Samba Packages for Debian GNU/Linux
---------------------------------------------
-
-Building Debian packages is not as hard as some people might think.
-The following instructions will allow you to build your own Samba
-Debian packages. These instructions and the files in packaging/Debian/
-should be current as of Samba 3.0.2, and allow you to build Debian
-packages for Debian unstable (so you need some development packages
-available only in Debian unstable.) If you are using something newer
-than 3.0.2 you might want to try to follow the instructions to see if
-patches apply cleanly. If some patches don't apply cleanly please e-mail
-samba@packages.debian.org since we might have fixed patches that we have
-not yet integrated into upstream Samba.
-
-We try to maintain as much compatibility with previous releases
-of Debian as possible, so it is possible that the files in
-packaging/Debian/ can also be used to build Samba Debian packages for
-other Debian releases. However, sometimes this is just not possible
-because we need to use stuff that is only available on Debian unstable.
-
-Instructions
-------------
-
-If you want to build Samba packages for Debian and you just want to use
-upstream sources, i.e. you don't want to wait for us to put official
-packages out, or you want packages for a Debian version for which we
-don't provide deb's, or you don't want to use official packages, or
-you want to add --this-cool-switch to configure, or whatever, follow
-these instructions:
-
-0) Make sure you have the following packages installed (in addition
-to the normal Debian development packages -- dpkg-dev, libc6-dev,
-devscripts, etc.):
-
-  autoconf
-  debhelper (>= 4.1.13)
-  libpam0g-dev
-  libreadline4-dev
-  libcupsys2-dev
-  libacl1-dev, libacl1 (>= 2.2.11-1)
-  libkrb5-dev
-  libldap2-dev
-  po-debconf
-  python2.3-dev
-
-  Notes regarding the packages required to build Samba Debian packages:
-
-  * The libcupsys2-dev is not available in Debian Potato (Debian 2.2).
-    That's fine; the configure script won't detect CUPS support and the
-    resulting binaries won't support CUPS.
-
-  * The list above is current as of samba-3.0.0rc2, but it can get
-    out of date. The best way to check what packages are required to
-    build the samba packages on Debian is to look for the Build-Depends:
-    field in the file debian/control.
-
-1) cd samba[-<version>]. For example, "cd samba-3.0.2".
-2) cp -a packaging/Debian/debian/ .
-  It's important that you copy instead of symlink because the build
-  tools in Potato have a problem that prevents the build to work with
-  a symlink. If you are running a recent Debian distribution you don't
-  have to copy the directory and you can use a symlink instead:
-  "ln -s packaging/Debian/debian/ ."
-3) dch -i (this is completely optional - only do it if you understand
-   Debian version numbers! Don't complain later if you can't upgrade
-   to official versions of the Samba packages for Debian.)
-  - Edit the changelog and make sure the version is right. For example,
-    for Samba 3.0.2, the version number should something like 3.0.2-0.1.
-4) Run 'fakeroot debian/rules binary'.
-5) That's it. Your new packages should be in ../. Install with dpkg.
-
-Please e-mail samba@packages.debian.org with comments, questions or
-suggestions. Please talk to us and not to the Samba Team. They have
-better things to do and know nothing about the Debian packaging system.
-
-Eloy A. Paris <peloy@debian.org>
-Steve Langasek <vorlon@debian.org>
-

packaging/Debian/debian-sarge/README.debian

@@ -1,175 +0,0 @@
-0. Samba Team Notes:
-This package is targeted at the current stable release of debian distribution
-(sarge) running on a 2.6.x kernel.
-This package has been made by Simo Sorce on behalf of the Samba Team.
-Do not use Debian BTS to report bugs, it's not a debian project package.
-Thanks to Eloy Paris and Steve "Vorlon" Langasek for the work they've done
-and continue to do on debian unstable packages. That greatly helps me in
-building up debian packages for the Team.
-
-
-WARNING: This package has been built on a 2.6.x kernel !
-
-Samba for Debian
-----------------
-
-This package was built by Eloy Paris <peloy@debian.org> and Steve Langasek
-<vorlon@debian.org>, current maintainers of the Samba packages for Debian,
-based on previous work from Bruce Perens <Bruce@Pixar.com>, Andrew
-Howell <andrew@it.com.au>, Klee Dienes <klee@debian.org> and Michael
-Meskes <meskes@topsystem.de>, all previous maintainers of the packages
-samba and sambades (merged together for longer than we can remember.)
-
-Contents of this README file:
-
-1. Notes
-2. Upgrading from Samba 2.2
-3. Packages Generated from the Samba Sources
-4. Support for NT Domains
-5. Reporting bugs
-
-
-1. Notes
---------
-
-- As of Samba 2.0.6-1, the Debian version of Samba is compiled with
-  Pluggable Authentication Modules (PAM) support. PAM support was 
-  discontinued during the libc5 -> libc6 migration process and I never
-  brought it back until 2.0.6-1.
-
-- The smbfs package does not support the 2.0.x Linux kernels anymore.
-  This has been the case since the very first packages of the CVS sources
-  that eventually became Samba 2.2. To use the smbfs package you need to
-  run a 2.2.x kernel or later.
-
-- Starting with the Debian packages for Samba 2.2, the Samba log files (for
-  nmbd and smbd) have been moved to a new location: /var/log/samba/. The
-  files also have new names: log.nmbd and log.smbd. The old files
-  (/var/log/{nmb,smb} were moved to the new location.
-
-
-2. Upgrading from Samba 2.2
----------------------------
-
-Samba 3.0 provides greatly improved support for modern Windows systems,
-including support for Unicode and LDAP.  In the process, Samba 3.0
-necessarily also breaks backward compatiblity with past releases.  These
-issues are documented herein; if you are aware of other problems related
-to upgrading from Samba 2.2, please let us know at
-<samba@packages.debian.org>.
-
-Samba and LDAP
---------------
-Starting with Samba 2.999+3.0cvs20020723-1 we are building Samba with
-LDAP support.  However, the LDAP schema for Samba 3.0 differs
-substantially from the schema used by many sites with Samba 2.2 (not
-enabled in the Debian packages).  If upgrading from an LDAP-enabled 2.2,
-you will need to run the convertSambaAccount script found in
-/usr/share/doc/samba-doc/examples/LDAP.  A copy of the schema itself can
-also be found at /usr/share/doc/samba-doc/examples/LDAP/samba.schema.
-
-Character Sets
---------------
-Samba 3.0 introduces support for negotiating Unicode (UCS-2LE) with
-Windows clients.  Owing to the close similarity between Windows and Unix
-NLS charsets, in the past, many users were able to pass filenames
-containing non-ASCII characters between clients and servers without
-configuring Samba to know what character set was in use.  Now, Samba
-must be able to convert Unix filenames to Unicode before sending to the
-client, so Samba must know what character set the filenames are being
-converted from.  If you will be sharing files with non-ASCII names, and
-the filenames are not encoded with UTF-8, you will need to tell Samba
-which character set to use with the 'unix charset' option.
-
-If you had previously specified 'character set' and 'client code page'
-options under 2.2, these settings should be automatically converted for
-you.
-
-
-3. Packages Generated from the Samba Sources
---------------------------------------------
-
-Currently, the Samba sources produce the following binary packages:
-
-samba: A LanManager like file and printer server for Unix.
-samba-common: Samba common files used by both the server and the client.
-smbclient: A LanManager like simple client for Unix.
-swat: Samba Web Administration Tool
-samba-doc: Samba documentation.
-smbfs: Mount and umount commands for the smbfs (works with 2.2.x and
-	above kernels, not with 2.0.x kernels.)
-libpam-smbpass: pluggable authentication module for SMB password
-	database.
-libsmbclient: Shared library that allows applications to talk to SMB servers.
-libsmbclient-dev: libsmbclient shared libraries.
-winbind: Service to resolve user and group information from a Windows NT 
-	server.
-python2.2-samba: Python bindings that allow access to various aspects of
-	Samba.
-
-Please note that the package smbwrapper (a shared library that provides
-SMB client services that existed between Samba 2.0.0-1 and Samba-2.0.5a-4
-does not exist any more. The reason is that starting with Samba 2.0.6-1, that
-code does not even compile, and the upstream author (Andrew Tridgell)
-recommended to disable the compilation of smbwrapper until some issues
-with glibc2.1 get cleared out (the problem is with glibc, not with Samba
-itself).
-
-
-4. Support for NT Domains
--------------------------
-
-Samba 2.2 includes preliminary support for NT domains. A Samba server
-can now be part of a Windows NT domain whose Primary Domain Controller
-is a Windows NT server. This feature is supposed to be stable although I
-haven't tried it myself. Read the documentation in the samba-doc package
-for help on how to do this (hint: "security = domain" in the smb.conf
-file).
-
-Samba 2.2 has also experimental support for Primary Domain
-Controller. This means that a Samba server can act now as a PDC. There
-are no special flags needed to compile Samba with NT domain PDC
-support. Please read the NTDOM PDC FAQ at www.samba.org (Documentation
-section).
-
-Please note that NT domain PDC support is far from complete and is still 
-experimental.
-
-
-5. Reporting Bugs
------------------
-
-If you believe you have found a bug please make sure the possible bug
-also exists in the latest version of Samba that is available for the
-unstable Debian distribution. If you are running Debian stable this
-means that you will probably have to build your own packages. And if the
-problem does not exist in the latest version of Samba we have packaged it
-means that you will have to run the version of Samba you built yourself
-since it is not easy to upload new packages to the stable distribution,
-unless they fix critical security problems.
-
-If you can reproduce the problem in the latest version of Samba then
-it is likely to be a real bug. Your best shot is to search the Samba
-mailing lists to see if it is something that has already been reported
-and fixed - if it is a simple fix we can add the patch to our packages
-without waiting for a new Samba release.
-
-If you decide that your problem deserves to be submitted to the Debian
-Bug Tracking System (BTS) we expect you to be responsive if we request
-more information. If we request more information and do not receive
-any in a reasonable time frame expect to see your bug closed without
-explanation - we can't fix bugs we can't reproduce, and most of the
-time we need more information to be able to reproduce them.
-
-When submitting a bug to the Debian BTS please include the version of
-the Debian package you are using as well as the Debian distribution you
-are using. Think _twice_ about the severity you assign to the bug: we
-are _very_ sensitive about bug severities; the fact that it doesn't
-work for you doesn't mean that the severity must be such that it holds
-a major Debian release. In fact, that it doesn't work for you it
-doesn't mean that it doesn't work for others. So again: think _twice_.
-
-
-Eloy A. Paris <peloy@debian.org>
-Steve Langasek <vorlon@debian.org>
-

packaging/Debian/debian-sarge/TODO

@@ -1,4 +0,0 @@
-Nothing in our list right now.
-
-Debian Samba Maintainers.-
-Sun Apr  6 01:34:21 EST 2003

packaging/Debian/debian-sarge/config.cache

@@ -1,221 +0,0 @@
-#
-# 22 August 2001  Steve Langasek <vorlon@debian.org>
-#
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-#
-# This config.cache file contains a list of acceptable autoconf
-# values which can be used in compiling Samba for Debian woody/sid.
-#
-# Autoconf sorts options alphabetically in its output.  This file
-# groups options logically.
-
-
-# Load any architecture-specific settings
-if [ -n "$DEB_HOST_GNU_TYPE" \
-     -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then
-	. ../debian/config.cache.${DEB_HOST_GNU_TYPE}
-fi
-
-
-# This is at the top because it's most in need of regular tweaking.
-# These are options which are supported on 2.4 kernels, but not on 2.2
-# kernels.
-
-samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no}
-samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no}
-samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no}
-
-
-# These are present in 2.2 kernels, but not in 2.0...
-
-samba_cv_have_setresuid=${samba_cv_have_setresuid=yes}
-samba_cv_have_setresgid=${samba_cv_have_setresgid=yes}
-samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes}
-
-
-# Various basic libc/compiler stuff that it's blindingly obvious that
-# Linux supports (now watch me get bitten for saying that)
-
-ac_cv_c_const=${ac_cv_c_const=yes}
-ac_cv_c_inline=${ac_cv_c_inline=inline}
-samba_cv_volatile=${samba_cv_volatile=yes}
-ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes}
-ac_cv_func_bzero=${ac_cv_func_bzero=yes}
-ac_cv_func_chmod=${ac_cv_func_chmod=yes}
-ac_cv_func_chown=${ac_cv_func_chown=yes}
-ac_cv_func_chroot=${ac_cv_func_chroot=yes}
-ac_cv_func_connect=${ac_cv_func_connect=yes}
-ac_cv_func_dup2=${ac_cv_func_dup2=yes}
-ac_cv_func_execl=${ac_cv_func_execl=yes}
-ac_cv_func_fchmod=${ac_cv_func_fchmod=yes}
-ac_cv_func_fchown=${ac_cv_func_fchown=yes}
-ac_cv_func_fstat=${ac_cv_func_fstat=yes}
-ac_cv_func_fsync=${ac_cv_func_fsync=yes}
-ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes}
-ac_cv_func_getcwd=${ac_cv_func_getcwd=yes}
-ac_cv_func_getgrent=${ac_cv_func_getgrent=yes}
-ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes}
-ac_cv_func_getspnam=${ac_cv_func_getspnam=yes}
-ac_cv_func_glob=${ac_cv_func_glob=yes}
-ac_cv_func_grantpt=${ac_cv_func_grantpt=yes}
-ac_cv_func_initgroups=${ac_cv_func_initgroups=yes}
-ac_cv_func_llseek=${ac_cv_func_llseek=yes}
-ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes}
-ac_cv_func_memmove=${ac_cv_func_memmove=yes}
-ac_cv_func_memset=${ac_cv_func_memset=yes}
-ac_cv_func_mktime=${ac_cv_func_mktime=yes}
-ac_cv_func_pipe=${ac_cv_func_pipe=yes}
-ac_cv_func_poll=${ac_cv_func_poll=yes}
-ac_cv_func_pread=${ac_cv_func_pread=yes}
-ac_cv_func_pwrite=${ac_cv_func_pwrite=yes}
-ac_cv_func_rand=${ac_cv_func_rand=yes}
-ac_cv_func_random=${ac_cv_func_random=yes}
-ac_cv_func_readlink=${ac_cv_func_readlink=yes}
-ac_cv_func_rename=${ac_cv_func_rename=yes}
-ac_cv_func_select=${ac_cv_func_select=yes}
-ac_cv_func_setenv=${ac_cv_func_setenv=yes}
-ac_cv_func_setgroups=${ac_cv_func_setgroups=yes}
-ac_cv_func_setsid=${ac_cv_func_setsid=yes}
-ac_cv_func_sigaction=${ac_cv_func_sigaction=yes}
-ac_cv_func_sigblock=${ac_cv_func_sigblock=yes}
-ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes}
-ac_cv_func_snprintf=${ac_cv_func_snprintf=yes}
-ac_cv_func_srand=${ac_cv_func_srand=yes}
-ac_cv_func_srandom=${ac_cv_func_srandom=yes}
-ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes}
-ac_cv_func_strchr=${ac_cv_func_strchr=yes}
-ac_cv_func_strdup=${ac_cv_func_strdup=yes}
-ac_cv_func_strerror=${ac_cv_func_strerror=yes}
-ac_cv_func_strftime=${ac_cv_func_strftime=yes}
-ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes}
-ac_cv_func_strtoul=${ac_cv_func_strtoul=yes}
-ac_cv_func_symlink=${ac_cv_func_symlink=yes}
-ac_cv_func_usleep=${ac_cv_func_usleep=yes}
-ac_cv_func_utime=${ac_cv_func_utime=yes}
-ac_cv_func_utimes=${ac_cv_func_utimes=yes}
-ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes}
-ac_cv_func_waitpid=${ac_cv_func_waitpid=yes}
-ac_cv_type_ino_t=${ac_cv_type_ino_t=yes}
-ac_cv_type_mode_t=${ac_cv_type_mode_t=yes}
-ac_cv_type_pid_t=${ac_cv_type_pid_t=yes}
-ac_cv_type_size_t=${ac_cv_type_size_t=yes}
-ac_cv_type_uid_t=${ac_cv_type_uid_t=yes}
-samba_cv_socklen_t=${samba_cv_socklen_t=yes}
-
-# Yes, we know Linux supports fcntl locking.  Just ignore
-# any errors caused by building on an NFS mount.
-samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes}
-
-
-# smbwrapper doesn't work because the glibc maintainers don't want
-# to support transparent userland VFS.  We might as well preempt
-# any checks for shadowed symbols that are only useful for smbwrapper.
-
-ac_cv_func___chdir=${ac_cv_func___chdir=no}
-ac_cv_func__chdir=${ac_cv_func__chdir=no}
-ac_cv_func___close=${ac_cv_func___close=no}
-ac_cv_func__close=${ac_cv_func__close=no}
-ac_cv_func___closedir=${ac_cv_func___closedir=no}
-ac_cv_func__closedir=${ac_cv_func__closedir=no}
-ac_cv_func___dup=${ac_cv_func___dup=no}
-ac_cv_func__dup=${ac_cv_func__dup=no}
-ac_cv_func___dup2=${ac_cv_func___dup2=no}
-ac_cv_func__dup2=${ac_cv_func__dup2=no}
-ac_cv_func___fchdir=${ac_cv_func___fchdir=no}
-ac_cv_func__fchdir=${ac_cv_func__fchdir=no}
-ac_cv_func___fcntl=${ac_cv_func___fcntl=no}
-ac_cv_func__fcntl=${ac_cv_func__fcntl=no}
-ac_cv_func___fork=${ac_cv_func___fork=no}
-ac_cv_func__fork=${ac_cv_func__fork=no}
-ac_cv_func___fstat=${ac_cv_func___fstat=no}
-ac_cv_func__fstat=${ac_cv_func__fstat=no}
-ac_cv_func___fstat64=${ac_cv_func___fstat64=no}
-ac_cv_func__fstat64=${ac_cv_func__fstat64=no}
-ac_cv_func___fxstat=${ac_cv_func___fxstat=no}
-ac_cv_func___getcwd=${ac_cv_func___getcwd=no}
-ac_cv_func__getcwd=${ac_cv_func__getcwd=no}
-ac_cv_func___getdents=${ac_cv_func___getdents=no}
-ac_cv_func__getdents=${ac_cv_func__getdents=no}
-ac_cv_func___llseek=${ac_cv_func___llseek=no}
-ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no}
-ac_cv_func__llseek=${ac_cv_func__llseek=no}
-ac_cv_func___lseek=${ac_cv_func___lseek=no}
-ac_cv_func__lseek=${ac_cv_func__lseek=no}
-ac_cv_func___lstat=${ac_cv_func___lstat=no}
-ac_cv_func__lstat=${ac_cv_func__lstat=no}
-ac_cv_func___lstat64=${ac_cv_func___lstat64=no}
-ac_cv_func__lstat64=${ac_cv_func__lstat64=no}
-ac_cv_func___lxstat=${ac_cv_func___lxstat=no}
-ac_cv_func___open=${ac_cv_func___open=no}
-ac_cv_func__open=${ac_cv_func__open=no}
-ac_cv_func___open64=${ac_cv_func___open64=no}
-ac_cv_func__open64=${ac_cv_func__open64=no}
-ac_cv_func___opendir=${ac_cv_func___opendir=no}
-ac_cv_func__opendir=${ac_cv_func__opendir=no}
-ac_cv_func___pread=${ac_cv_func___pread=no}
-ac_cv_func__pread=${ac_cv_func__pread=no}
-ac_cv_func___pread64=${ac_cv_func___pread64=no}
-ac_cv_func__pread64=${ac_cv_func__pread64=no}
-ac_cv_func___pwrite=${ac_cv_func___pwrite=no}
-ac_cv_func__pwrite=${ac_cv_func__pwrite=no}
-ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no}
-ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no}
-ac_cv_func___read=${ac_cv_func___read=no}
-ac_cv_func__read=${ac_cv_func__read=no}
-ac_cv_func___readdir=${ac_cv_func___readdir=no}
-ac_cv_func__readdir=${ac_cv_func__readdir=no}
-ac_cv_func___readdir64=${ac_cv_func___readdir64=no}
-ac_cv_func__readdir64=${ac_cv_func__readdir64=no}
-ac_cv_func___seekdir=${ac_cv_func___seekdir=no}
-ac_cv_func__seekdir=${ac_cv_func__seekdir=no}
-ac_cv_func___stat=${ac_cv_func___stat=no}
-ac_cv_func__stat=${ac_cv_func__stat=no}
-ac_cv_func___stat64=${ac_cv_func___stat64=no}
-ac_cv_func__stat64=${ac_cv_func__stat64=no}
-ac_cv_func___telldir=${ac_cv_func___telldir=no}
-ac_cv_func__telldir=${ac_cv_func__telldir=no}
-ac_cv_func___write=${ac_cv_func___write=no}
-ac_cv_func__write=${ac_cv_func__write=no}
-ac_cv_func___xstat=${ac_cv_func___xstat=no}
-
-
-
-# Miscellaneous stuff that isn't, and shouldn't be, available
-# in Debian.  Those interested in building debs for other systems may
-# need to remove some of these defines.
-
-ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no}
-ac_cv_func_crypt16=${ac_cv_func_crypt16=no}
-ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no}
-ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no}
-ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no}
-ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no}
-ac_cv_func_rdchk=${ac_cv_func_rdchk=no}
-ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no}
-ac_cv_func_setgidx=${ac_cv_func_setgidx=no}
-ac_cv_func_setluid=${ac_cv_func_setluid=no}
-ac_cv_func_setpriv=${ac_cv_func_setpriv=no}
-ac_cv_func_setuidx=${ac_cv_func_setuidx=no}
-ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no}
-ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no}
-ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no}
-ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no}
-ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no}
-ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no}
-ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no}
-ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no}
-ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no}
-ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no}

packaging/Debian/debian-sarge/config.cache.alpha-linux

@@ -1,12 +0,0 @@
-# 22 Aug 2001  Steve Langasek <vorlon@debian.org>
-
-# This file contains autoconf settings specific to the alpha-linux
-# platform that should be preloaded when building for this architecture.
-
-
-# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but
-# Linux 2.4 does.  Ensure that packages compiled for woody remain
-# compatible with 2.2 kernels, even if the build machine is running 2.4.
-samba_cv_have_setresgid=${samba_cv_have_setresgid=no}
-samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no}
-samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes}

packaging/Debian/debian-sarge/config.cache.sparc-linux

@@ -1,13 +0,0 @@
-# 24 Spe 2001  Steve Langasek <vorlon@debian.org>
-
-# This file contains autoconf settings specific to the sparc-linux
-# platform that should be preloaded when building for this architecture.
-
-
-# Linux 2.2 on Sparc doesn't have setresgid() or setresuid(), but
-# Linux 2.4 does.  Ensure that packages compiled for woody remain
-# compatible with 2.2 kernels, even if the build machine is running 2.4.
-samba_cv_have_setresuid=${samba_cv_have_setresuid=no}
-samba_cv_have_setresgid=${samba_cv_have_setresgid=no}
-samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no}
-samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes}

packaging/Debian/debian-sarge/control

@@ -1,201 +0,0 @@
-Source: samba
-Section: net
-Priority: optional
-Maintainer: Simo Sorce <idra@samba.org>
-Uploaders: Simo Sorce <idra@samba.org>
-Build-Depends: debhelper (>= 4.1.13), libpam0g-dev, libreadline4-dev, libcupsys2-dev (>=1.1.20final+cvs20040330-4), autoconf, libacl1-dev (>= 2.2.11-1) [alpha arm hppa i386 ia64 m68k mips mipsel powerpc s390 s390x sh3 sh3eb sh4 sh4eb sparc sparc64 amd64], libkrb5-dev, libldap2-dev, po-debconf, python2.3-dev, binutils (>= 2.14.90.0.7), type-handling (>= 0.2.1)
-Standards-Version: 3.5.10
-
-Package: samba
-Architecture: any
-Depends: samba-common (= ${Source-Version}), netbase, logrotate, ${shlibs:Depends}, ${misc:Depends}, libpam-runtime (>= 0.76-13.1), libpam-modules
-Replaces: samba-common (<= 2.0.5a-2)
-Suggests: samba-doc
-Description: a LanManager-like file and printer server for Unix
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains all the components necessary to turn your
- Debian GNU/Linux box into a powerful file and printer server.
- .
- Currently, the Samba Debian packages consist of the following:
- .
-  samba - LanManager-like file and printer server for Unix.
-  samba-common - Samba common files used by both the server and the client.
-  smbclient - LanManager-like simple client for Unix.
-  swat - Samba Web Administration Tool
-  samba-doc - Samba documentation.
-  smbfs - Mount and umount commands for the smbfs (kernels 2.2.x and above).
-  libpam-smbpass - pluggable authentication module for SMB password database
-  libsmbclient - Shared library that allows applications to talk to SMB servers
-  libsmbclient-dev - libsmbclient shared libraries
-  winbind: Service to resolve user and group information from Windows NT servers
-  python2.3-samba: Python bindings that allow access to various aspects of Samba
- .
- It is possible to install a subset of these packages depending on
- your particular needs. For example, to access other SMB servers you
- should only need the smbclient and samba-common packages.
-
-Package: samba-common
-Architecture: any
-Depends: debconf, libpam-modules, ${shlibs:Depends}
-Replaces: samba (<< 2.999+3.0.alpha21-4)
-Description: Samba common files used by both the server and the client
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains the common files that are used by both the server
- (provided in the samba package) and the client (provided in the smbclient
- package).
-
-Package: smbclient
-Architecture: any
-Depends: samba-common (= ${Source-Version}), ${shlibs:Depends}
-Replaces: samba (<< 2.999+3.0.alpha21-4)
-Provides: samba-client
-Suggests: smbfs
-Description: a LanManager-like simple client for Unix
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains some client components of the Samba suite. In
- particular it includes the command line utilities smbclient, smbtar,
- and smbspool. If you want to mount shares exported from Microsoft
- Windows machines or a Samba server you must install the smbfs package.
-
-Package: swat
-Architecture: any
-Depends: debconf, samba (= ${Source-Version}), ${shlibs:Depends}
-Recommends: samba-doc
-Description: Samba Web Administration Tool
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains the components of the Samba suite that are needed
- for Web administration of the Samba server.
- .
- Note: if you want to use the on-line documentation that is accesible
- through the Swat front-end you must install the samba-doc package.
-
-Package: samba-doc
-Section: doc
-Architecture: all
-Description: Samba documentation
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains all the documentation that comes in the original
- tarball.
-
-Package: smbfs
-Section: otherosfs
-Priority: optional
-Architecture: any
-Depends: netbase (>= 2.02), samba-common (= ${Source-Version}), ${shlibs:Depends}
-Suggests: smbclient
-Replaces: smbfsx
-Conflicts: smbfsx, suidmanager (<< 0.50)
-Description: mount and umount commands for the smbfs (for kernels >= than 2.2.x)
- Smbfs is a filesystem which understands the SMB protocol.
- This is the protocol Windows for Workgroups, Windows NT or
- LAN Manager use to talk to each other. It was inspired by
- samba, the program by Andrew Tridgell that turns any unix
- site into a file server for DOS or Windows clients.
- .
- If you want to use command-line utilities like smbclient, smbtar
- and/or smbspool you just need to install the smbclient package.
- .
- Starting with the Debian Samba packages version 2.2.0-1, the old smbfs
- utilities for 2.0.x have been removed. There are no wrapper scripts
- that call a specific smbmount/smbumount depending on the kernel
- version.  If you are using a 2.0.x kernel please upgrade or use the
- latest Samba 2.0.7 Debian package.
-
-Package: libpam-smbpass
-Section: admin
-Priority: extra
-Architecture: any
-Depends: ${shlibs:Depends}
-Suggests: samba
-Description: pluggable authentication module for SMB password database
- This is a stackable PAM module that allows a system administrator to easily
- migrate to using encrypted passwords for Samba and to keep smb passwords in
- sync with unix passwords.  Unlike other solutions, it does this without
- requiring users to change their existing passwords or login to Samba using
- cleartext passwords.
-
-Package: libsmbclient
-Section: libs
-Priority: extra
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: shared library that allows applications to talk to SMB servers
- libsmbclient allows to write applications that use the SMB protocol.
- This gives applications the ability to talk to Microsoft Windows servers
- and Unix servers running Samba.
- .
- This package contains the libsmbclient shared library.
-
-Package: libsmbclient-dev
-Section: libdevel
-Priority: extra
-Architecture: any
-Depends: libsmbclient (= ${Source-Version})
-Description: libsmbclient static libraries and headers
- libsmbclient allows to write applications that use the SMB protocol.
- This gives applications the ability to talk to Microsoft Windows servers
- and Unix servers running Samba.
- .
- This package contains the libsmbclient static libraries and headers
- needed to build applications that use SMB services.
-
-Package: winbind
-Section: net
-Priority: optional
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Replaces: samba (<= 2.2.3-2)
-Description: service to resolve user and group information from Windows NT servers
- This package provides the winbindd daemon, which provides a
- service for the Name Service Switch capability that is present
- in most modern C libraries (like the GNU C Library - glibc.)
- .
- The service provided by winbindd is called `winbind' and
- can be used to resolve user and group information from a
- Windows NT server. The service can also provide authentication
- services via an associated PAM module.
-
-Package: python2.3-samba
-Section: python
-Priority: optional
-Architecture: any
-Depends: ${shlibs:Depends}, python2.3
-Description: Python bindings that allow access to various aspects of Samba
- The Samba Python bindings allow you to access various aspects of Samba.
- At the moment their status is "experimental" but they have been reported
- to work well.
- .
- See /usr/share/doc/python2.3-samba/examples for a couple of examples.
-
-Package: samba-dbg
-Section: devel
-Architecture: any
-Depends: samba (= ${Source-Version})
-Description: Samba debugging symbols
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains debugging symbols for the programs included in
- the samba and smbclient packages.

packaging/Debian/debian-sarge/control.in

@@ -1,201 +0,0 @@
-Source: samba
-Section: net
-Priority: optional
-Maintainer: Simo Sorce <idra@samba.org>
-Uploaders: Simo Sorce <idra@samba.org>
-Build-Depends: debhelper (>= 4.1.13), libpam0g-dev, libreadline4-dev, libcupsys2-dev (>=1.1.20final+cvs20040330-4), autoconf, libacl1-dev (>= 2.2.11-1) [@libacl@], libkrb5-dev, libldap2-dev, po-debconf, python2.3-dev, binutils (>= 2.14.90.0.7), type-handling (>= 0.2.1)
-Standards-Version: 3.5.10
-
-Package: samba
-Architecture: any
-Depends: samba-common (= ${Source-Version}), netbase, logrotate, ${shlibs:Depends}, ${misc:Depends}, libpam-runtime (>= 0.76-13.1), libpam-modules
-Replaces: samba-common (<= 2.0.5a-2)
-Suggests: samba-doc
-Description: a LanManager-like file and printer server for Unix
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains all the components necessary to turn your
- Debian GNU/Linux box into a powerful file and printer server.
- .
- Currently, the Samba Debian packages consist of the following:
- .
-  samba - LanManager-like file and printer server for Unix.
-  samba-common - Samba common files used by both the server and the client.
-  smbclient - LanManager-like simple client for Unix.
-  swat - Samba Web Administration Tool
-  samba-doc - Samba documentation.
-  smbfs - Mount and umount commands for the smbfs (kernels 2.2.x and above).
-  libpam-smbpass - pluggable authentication module for SMB password database
-  libsmbclient - Shared library that allows applications to talk to SMB servers
-  libsmbclient-dev - libsmbclient shared libraries
-  winbind: Service to resolve user and group information from Windows NT servers
-  python2.3-samba: Python bindings that allow access to various aspects of Samba
- .
- It is possible to install a subset of these packages depending on
- your particular needs. For example, to access other SMB servers you
- should only need the smbclient and samba-common packages.
-
-Package: samba-common
-Architecture: any
-Depends: debconf, libpam-modules, ${shlibs:Depends}
-Replaces: samba (<< 2.999+3.0.alpha21-4)
-Description: Samba common files used by both the server and the client
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains the common files that are used by both the server
- (provided in the samba package) and the client (provided in the smbclient
- package).
-
-Package: smbclient
-Architecture: any
-Depends: samba-common (= ${Source-Version}), ${shlibs:Depends}
-Replaces: samba (<< 2.999+3.0.alpha21-4)
-Provides: samba-client
-Suggests: smbfs
-Description: a LanManager-like simple client for Unix
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains some client components of the Samba suite. In
- particular it includes the command line utilities smbclient, smbtar,
- and smbspool. If you want to mount shares exported from Microsoft
- Windows machines or a Samba server you must install the smbfs package.
-
-Package: swat
-Architecture: any
-Depends: debconf, samba (= ${Source-Version}), ${shlibs:Depends}
-Recommends: samba-doc
-Description: Samba Web Administration Tool
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains the components of the Samba suite that are needed
- for Web administration of the Samba server.
- .
- Note: if you want to use the on-line documentation that is accesible
- through the Swat front-end you must install the samba-doc package.
-
-Package: samba-doc
-Section: doc
-Architecture: all
-Description: Samba documentation
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains all the documentation that comes in the original
- tarball.
-
-Package: smbfs
-Section: otherosfs
-Priority: optional
-Architecture: any
-Depends: netbase (>= 2.02), samba-common (= ${Source-Version}), ${shlibs:Depends}
-Suggests: smbclient
-Replaces: smbfsx
-Conflicts: smbfsx, suidmanager (<< 0.50)
-Description: mount and umount commands for the smbfs (for kernels >= than 2.2.x)
- Smbfs is a filesystem which understands the SMB protocol.
- This is the protocol Windows for Workgroups, Windows NT or
- LAN Manager use to talk to each other. It was inspired by
- samba, the program by Andrew Tridgell that turns any unix
- site into a file server for DOS or Windows clients.
- .
- If you want to use command-line utilities like smbclient, smbtar
- and/or smbspool you just need to install the smbclient package.
- .
- Starting with the Debian Samba packages version 2.2.0-1, the old smbfs
- utilities for 2.0.x have been removed. There are no wrapper scripts
- that call a specific smbmount/smbumount depending on the kernel
- version.  If you are using a 2.0.x kernel please upgrade or use the
- latest Samba 2.0.7 Debian package.
-
-Package: libpam-smbpass
-Section: admin
-Priority: extra
-Architecture: any
-Depends: ${shlibs:Depends}
-Suggests: samba
-Description: pluggable authentication module for SMB password database
- This is a stackable PAM module that allows a system administrator to easily
- migrate to using encrypted passwords for Samba and to keep smb passwords in
- sync with unix passwords.  Unlike other solutions, it does this without
- requiring users to change their existing passwords or login to Samba using
- cleartext passwords.
-
-Package: libsmbclient
-Section: libs
-Priority: extra
-Architecture: any
-Depends: ${shlibs:Depends}
-Description: shared library that allows applications to talk to SMB servers
- libsmbclient allows to write applications that use the SMB protocol.
- This gives applications the ability to talk to Microsoft Windows servers
- and Unix servers running Samba.
- .
- This package contains the libsmbclient shared library.
-
-Package: libsmbclient-dev
-Section: libdevel
-Priority: extra
-Architecture: any
-Depends: libsmbclient (= ${Source-Version})
-Description: libsmbclient static libraries and headers
- libsmbclient allows to write applications that use the SMB protocol.
- This gives applications the ability to talk to Microsoft Windows servers
- and Unix servers running Samba.
- .
- This package contains the libsmbclient static libraries and headers
- needed to build applications that use SMB services.
-
-Package: winbind
-Section: net
-Priority: optional
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Replaces: samba (<= 2.2.3-2)
-Description: service to resolve user and group information from Windows NT servers
- This package provides the winbindd daemon, which provides a
- service for the Name Service Switch capability that is present
- in most modern C libraries (like the GNU C Library - glibc.)
- .
- The service provided by winbindd is called `winbind' and
- can be used to resolve user and group information from a
- Windows NT server. The service can also provide authentication
- services via an associated PAM module.
-
-Package: python2.3-samba
-Section: python
-Priority: optional
-Architecture: any
-Depends: ${shlibs:Depends}, python2.3
-Description: Python bindings that allow access to various aspects of Samba
- The Samba Python bindings allow you to access various aspects of Samba.
- At the moment their status is "experimental" but they have been reported
- to work well.
- .
- See /usr/share/doc/python2.3-samba/examples for a couple of examples.
-
-Package: samba-dbg
-Section: devel
-Architecture: any
-Depends: samba (= ${Source-Version})
-Description: Samba debugging symbols
- The Samba software suite is a collection of programs that
- implements the SMB protocol for unix systems, allowing you to serve
- files and printers to Windows, NT, OS/2 and DOS clients. This protocol
- is sometimes also referred to as the LanManager or NetBIOS protocol.
- .
- This package contains debugging symbols for the programs included in
- the samba and smbclient packages.

packaging/Debian/debian-sarge/copyright

@@ -1,29 +0,0 @@
-This is the Samba Team prepackaged version of the Samba SMB
-(LAN-Manager) server for Debian systems. Samba was written by
-Andrew Tridgell <tridge@samba.org>, the Samba Team and many others.
-
-This package has been produced by Simo Sorce <idra@samba.org>
-using scripts put together by Eloy Paris <peloy@debian.org>,
-Steve Langasek <vorlon@debian.org>, and Víctor Pérez Pereira 
-<vperez@debianvenezuela.org> based on previous work by Klee Dienes
-<klee@debian.org>, Andrew Howell <andrew@it.com.au> and Bruce Perens
-<bruce@pixar.com> from sources found at
-<URL:http://www.samba.org/samba/ftp/>.
-
-Copyright:
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 3 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-   
-   You should have received a copy of the GNU General Public License
-   along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-On Debian GNU/Linux systems, the complete text of the GNU General
-Public License can be found in `/usr/share/common-licenses/GPL'.

packaging/Debian/debian-sarge/gdbcommands

@@ -1,2 +0,0 @@
-bt
-quit

packaging/Debian/debian-sarge/libpam-smbpass.docs

@@ -1,2 +0,0 @@
-source/pam_smbpass/README 
-source/pam_smbpass/TODO

packaging/Debian/debian-sarge/libpam-smbpass.examples

@@ -1,5 +0,0 @@
-source/pam_smbpass/samples/README
-source/pam_smbpass/samples/kdc-pdc
-source/pam_smbpass/samples/password-mature
-source/pam_smbpass/samples/password-migration
-source/pam_smbpass/samples/password-sync

packaging/Debian/debian-sarge/libpam-smbpass.files

@@ -1 +0,0 @@
-lib/security/pam_smbpass.so

packaging/Debian/debian-sarge/libsmbclient-dev.examples

@@ -1 +0,0 @@
-examples/libsmbclient/

packaging/Debian/debian-sarge/libsmbclient-dev.files

@@ -1,3 +0,0 @@
-usr/lib/libsmbclient.a
-usr/lib/libsmbclient.so
-usr/include/libsmbclient.h

packaging/Debian/debian-sarge/libsmbclient.files

@@ -1,2 +0,0 @@
-usr/lib/libsmbclient.so.0.1
-usr/lib/libsmbclient.so.0

packaging/Debian/debian-sarge/libsmbclient.shlibs

@@ -1 +0,0 @@
-libsmbclient	0	libsmbclient (>= 3.0.2a-1)

packaging/Debian/debian-sarge/mksmbpasswd.8

@@ -1,28 +0,0 @@
-.TH MKSMBPASSWD 8 12-Apr-1998
-.SH NAME
-mksmbpasswd \- formats a /etc/passwd entry for a smbpasswd file
-.SH SYNOPSIS
-mksmbpasswd cat /etc/passwd | /usr/sbin/mksmbpasswd > /etc/samba/smbpasswd
-.SH DESCRIPTION
-.B mksmbpasswd
-should be used only once, the first time Samba is installed. The idea
-is to ease accounts creation by transferring all user accounts from 
-/etc/passwd to /etc/samba/smbpasswd.
-.PP
-Please note that passwords are not transferred automatically from
-/etc/passwd to the new /etc/samba/smbpasswd file. After running
-.B mksmbpasswd
-all accounts are disabled so the system administrator must run
-smbpasswd for each account that needs to be enable.
-.SH FILES
-.TP
-/etc/passwd
-System wide accounts file
-.TP
-/etc/samba/smbpasswd
-Encrypted passwords file for the Samba daemons
-.SH SEE ALSO
-samba(7), nmbd(8), smbd(8)
-.SH AUTHOR
-Eloy A. Paris <peloy@debian.org> (man page based on sendmailconfig's man page
-by Robert Leslie <rob@mars.org>)

packaging/Debian/debian-sarge/mksmbpasswd.awk

@@ -1,5 +0,0 @@
-#!/usr/bin/awk -f
-BEGIN {FS=":"
-	printf("#\n# SMB password file.\n#\n")
-	}
-{ printf( "%s:%s:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX:[U          ]:LCT-00000000:%s\n", $1, $3, $5) }

packaging/Debian/debian-sarge/panic-action

@@ -1,48 +0,0 @@
-#!/bin/sh
-
-# Redirect all output to our mail command
-(
-	# We must be given a pid to look at
-	if [ -z "$1" ]; then
-		echo "$0 called with no arguments."
-		exit 1
-	fi
-
-	if [ ! -d "/proc/$1" ]; then
-		echo "$0: No such process: $1"
-		exit 1
-	fi
-
-	# Find out what binary we're debugging
-	BINARYNAME=`readlink "/proc/$1/exe"`
-
-	# Generic header for our email
-	echo "The Samba 'panic action' script, $0,"
-	echo "was called for pid $1 ($BINARYNAME)."
-	echo
-
-	if [ -z "$BINARYNAME" ]; then
-		echo "This means there was a problem with the program, such as a segfault."
-		echo "However, the executable could not be found for process $1."
-		echo "It may have died unexpectedly, or you may not have permission to"
-		echo "debug the process."
-		exit 1
-	fi
-
-	# No debugger
-	if [ ! -x /usr/bin/gdb ]; then
-		echo "This means there was a problem with the program, such as a segfault."
-		echo "However, gdb was not found on your system, so the error could not be"
-		echo "debugged.  Please install the gdb package so that debugging information is"
-		echo "available the next time such a problem occurs."
-		exit 1
-	fi
-
-	echo "Below is a backtrace for this process generated with gdb, which shows"
-	echo "the state of the program at the time the error occured.  You are"
-	echo "encouraged to submit this information as a bug report to Debian.  For"
-	echo "information about the procedure for submitting bug reports , please see"
-	echo "http://www.debian.org/Bugs/Reporting or the reportbug(1) manpage."
-	echo
-	gdb -x /etc/samba/gdbcommands -batch "$BINARYNAME" "$1"
-) | mail -s "Segfault in Samba" root

packaging/Debian/debian-sarge/patches/cups.patch

@@ -1,14 +0,0 @@
---- samba-3.0.10.orig/source/include/includes.h
-+++ samba-3.0.10/source/include/includes.h
-@@ -940,10 +940,7 @@
- #endif
- 
- #ifndef DEFAULT_PRINTING
--#ifdef HAVE_CUPS
--#define DEFAULT_PRINTING PRINT_CUPS
--#define PRINTCAP_NAME "cups"
--#elif defined(SYSV)
-+#if defined(SYSV)
- #define DEFAULT_PRINTING PRINT_SYSV
- #define PRINTCAP_NAME "lpstat"
- #else

packaging/Debian/debian-sarge/patches/documentation.patch

@@ -1,66 +0,0 @@
---- samba-3.0.4/docs/manpages/swat.8.orig	2004-05-05 10:22:50.000000000 -0400
-+++ samba-3.0.4/docs/manpages/swat.8	2004-05-10 13:25:53.000000000 -0400
-@@ -80,6 +80,13 @@
- .SH "INSTALLATION"
- 
- .PP
-+\fBDebian-specific Note\fR: all these steps have already been done for
-+you. However, by default, swat is not enabled. This has been done for
-+security reasons. To enable swat you need to edit /etc/inetd.conf,
-+uncomment the swat entry (usually at the end of the file), and then
-+restart inetd.
-+
-+.PP
- Swat is included as binary package with most distributions\&. The package manager in this case takes care of the installation and configuration\&. This section is only for those who have compiled swat from scratch\&.
- 
- .PP
-@@ -87,13 +94,13 @@
- 
- .TP 3
- \(bu
--/usr/local/samba/sbin/swat
-+/usr/sbin/swat
- .TP
- \(bu
--/usr/local/samba/swat/images/*
-+/usr/share/samba/swat/images/*
- .TP
- \(bu
--/usr/local/samba/swat/help/*
-+/usr/share/samba/swat/help/*
- .LP
- 
- .SS "Inetd Installation"
-@@ -102,7 +109,7 @@
- You need to edit your \fI/etc/inetd\&.conf \fR and \fI/etc/services\fR to enable SWAT to be launched via \fBinetd\fR\&.
- 
- .PP
--In \fI/etc/services\fR you need to add a line like this:
-+In \fI/etc/services\fR you need to add a line like this (not needed for Debian):
- 
- .PP
- \fBswat 901/tcp\fR
-@@ -114,10 +121,10 @@
- the choice of port number isn't really important except that it should be less than 1024 and not currently used (using a number above 1024 presents an obscure security hole depending on the implementation details of your\fBinetd\fR daemon)\&.
- 
- .PP
--In \fI/etc/inetd\&.conf\fR you should add a line like this:
-+In \fI/etc/inetd\&.conf\fR you should add a line like this (not needed for Debian since the maintainer scripts do it automatically. You need to uncomment the line, though, because it is added commented out for security reasons):
- 
- .PP
--\fBswat stream tcp nowait\&.400 root /usr/local/samba/sbin/swat swat\fR
-+\fBswat stream tcp nowait\&.400 root /usr/sbin/swat swat\fR
- 
- .PP
- Once you have edited \fI/etc/services\fR and \fI/etc/inetd\&.conf\fR you need to send a HUP signal to inetd\&. To do this use \fBkill \-1 PID \fR where PID is the process ID of the inetd daemon\&.
-@@ -141,8 +148,8 @@
- This file must contain a mapping of service name (e\&.g\&., swat) to service port (e\&.g\&., 901) and protocol type (e\&.g\&., tcp)\&.
- 
- .TP
--\fI/usr/local/samba/lib/smb\&.conf\fR
--This is the default location of the \fBsmb\&.conf\fR(5) server configuration file that swat edits\&. Other common places that systems install this file are \fI /usr/samba/lib/smb\&.conf\fR and \fI/etc/smb\&.conf \fR\&. This file describes all the services the server is to make available to clients\&.
-+\fI/etc/samba/smb\&.conf\fR
-+This is the default location of the \fBsmb\&.conf\fR(5) server configuration file that swat edits\&. This file describes all the services the server is to make available to clients\&.
- 
- .SH "WARNINGS"
- 

packaging/Debian/debian-sarge/patches/fhs.patch

@@ -1,551 +0,0 @@
-diff -uNr samba-3.0.10.orig/source/Makefile.in samba-3.0.10/source/Makefile.in
---- samba-3.0.10.orig/source/Makefile.in	2004-12-17 03:50:08.000000000 -0800
-+++ samba-3.0.10/source/Makefile.in	2004-12-17 03:55:29.000000000 -0800
-@@ -90,6 +90,13 @@
- # the directory where lock files go
- LOCKDIR = @lockdir@
- 
-+# FHS directories; equal to LOCKDIR if not using --with-fhs
-+CACHEDIR = @cachedir@
-+STATEDIR = @statedir@
-+
-+# Where to look for (and install) codepage databases.
-+CODEPAGEDIR = @codepagedir@
-+
- # the directory where pid files go
- PIDDIR = @piddir@
- # man pages language(s)
-@@ -114,7 +121,7 @@
- PATH_FLAGS4 = $(PATH_FLAGS3) -DSWATDIR=\"$(SWATDIR)\"  -DLOCKDIR=\"$(LOCKDIR)\" -DPIDDIR=\"$(PIDDIR)\"
- PATH_FLAGS5 = $(PATH_FLAGS4) -DLIBDIR=\"$(LIBDIR)\" \
- 	      -DLOGFILEBASE=\"$(LOGFILEBASE)\" -DSHLIBEXT=\"@SHLIBEXT@\"
--PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\"
-+PATH_FLAGS6 = $(PATH_FLAGS5) -DCONFIGDIR=\"$(CONFIGDIR)\" -DCODEPAGEDIR=\"$(CODEPAGEDIR)\" -DCACHEDIR=\"$(CACHEDIR)\" -DSTATEDIR=\"$(STATEDIR)\"
- PATH_FLAGS = $(PATH_FLAGS6) $(PASSWD_FLAGS)
- 
- # Note that all executable programs now provide for an optional executable suffix.
-@@ -1319,7 +1326,7 @@
- 	@$(SHELL) $(srcdir)/script/installscripts.sh $(INSTALLPERMS) $(DESTDIR)$(BINDIR) $(SCRIPTS)
- 
- installdat: installdirs
--	@$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR) $(LIBDIR) $(srcdir)
-+	@$(SHELL) $(srcdir)/script/installdat.sh $(DESTDIR) $(CODEPAGEDIR) $(srcdir)
- 
- installmsg: installdirs
- 	@$(SHELL) $(srcdir)/script/installmsg.sh $(DESTDIR) $(LIBDIR) $(srcdir)
-diff -uNr samba-3.0.10.orig/source/configure.in samba-3.0.10/source/configure.in
---- samba-3.0.10.orig/source/configure.in	2004-12-17 03:50:08.000000000 -0800
-+++ samba-3.0.10/source/configure.in	2004-12-17 03:55:29.000000000 -0800
-@@ -35,7 +35,7 @@
- [  --with-fhs              Use FHS-compliant paths (default=no)],
- [ case "$withval" in
-   yes)
--    lockdir="\${VARDIR}/lib/samba"
-+    lockdir="\${VARDIR}/run/samba"
-     piddir="\${VARDIR}/run"
-     mandir="\${prefix}/share/man"
-     logfilebase="\${VARDIR}/log/samba"
-@@ -43,6 +43,10 @@
-     libdir="\${prefix}/lib/samba"
-     configdir="${sysconfdir}/samba"
-     swatdir="\${DATADIR}/samba/swat"
-+    codepagedir="\${DATADIR}/samba"
-+    statedir="\${VARDIR}/lib/samba"
-+    cachedir="\${VARDIR}/cache/samba"
-+    AC_DEFINE(FHS_COMPATIBLE, 1, [Whether to use fully FHS-compatible paths])
-     ;;
-   esac])
- 
-@@ -201,6 +205,9 @@
- AC_SUBST(sbindir)
- AC_SUBST(rootsbindir)
- AC_SUBST(pammodulesdir)
-+AC_SUBST(codepagedir)
-+AC_SUBST(statedir)
-+AC_SUBST(cachedir)
- 
- dnl Unique-to-Samba variables we'll be playing with.
- AC_SUBST(SHELL)
-diff -uNr samba-3.0.10.orig/source/dynconfig.c samba-3.0.10/source/dynconfig.c
---- samba-3.0.10.orig/source/dynconfig.c	2004-12-17 03:50:08.000000000 -0800
-+++ samba-3.0.10/source/dynconfig.c	2004-12-17 03:55:29.000000000 -0800
-@@ -53,6 +53,13 @@
- pstring dyn_LMHOSTSFILE = LMHOSTSFILE;
- 
- /**
-+ * @brief Samba data directory.
-+ *
-+ * @sa data_path() to get the path to a file inside the CODEPAGEDIR.
-+ **/
-+pstring dyn_CODEPAGEDIR = CODEPAGEDIR;
-+
-+/**
-  * @brief Samba library directory.
-  *
-  * @sa lib_path() to get the path to a file inside the LIBDIR.
-@@ -70,3 +77,27 @@
- 
- pstring dyn_SMB_PASSWD_FILE = SMB_PASSWD_FILE;
- pstring dyn_PRIVATE_DIR = PRIVATE_DIR;
-+
-+
-+/* In non-FHS mode, these should be configurable using 'lock dir =';
-+   but in FHS mode, they are their own directory.  Implement as wrapper
-+   functions so that everything can still be kept in dynconfig.c.
-+ */
-+
-+char *dyn_STATEDIR(void)
-+{
-+#ifdef FHS_COMPATIBLE
-+	return STATEDIR;
-+#else
-+	return lp_lockdir();
-+#endif
-+}
-+
-+char *dyn_CACHEDIR(void)
-+{
-+#ifdef FHS_COMPATIBLE
-+	return CACHEDIR;
-+#else
-+	return lp_lockdir();
-+#endif
-+}
-diff -uNr samba-3.0.10.orig/source/groupdb/mapping.c samba-3.0.10/source/groupdb/mapping.c
---- samba-3.0.10.orig/source/groupdb/mapping.c	2004-12-17 03:50:08.000000000 -0800
-+++ samba-3.0.10/source/groupdb/mapping.c	2004-12-17 03:55:29.000000000 -0800
-@@ -140,8 +140,8 @@
- 	
- 	if (tdb)
- 		return True;
- 		
--	tdb = tdb_open_log(lock_path("group_mapping.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
-+	tdb = tdb_open_log(state_path("group_mapping.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
- 	if (!tdb) {
- 		DEBUG(0,("Failed to open group mapping database\n"));
- 		return False;
-diff -uNr samba-3.0.10.orig/source/include/dynconfig.h samba-3.0.10/source/include/dynconfig.h
---- samba-3.0.10.orig/source/include/dynconfig.h	2004-12-17 03:50:08.000000000 -0800
-+++ samba-3.0.10/source/include/dynconfig.h	2004-12-17 03:55:29.000000000 -0800
-@@ -31,8 +31,12 @@
- extern pstring dyn_CONFIGFILE;
- extern pstring dyn_LOGFILEBASE, dyn_LMHOSTSFILE;
- extern pstring dyn_LIBDIR;
-+extern pstring dyn_CODEPAGEDIR;
- extern fstring dyn_SHLIBEXT;
- extern pstring dyn_LOCKDIR;
- extern pstring dyn_PIDDIR;
- extern pstring dyn_SMB_PASSWD_FILE;
- extern pstring dyn_PRIVATE_DIR;
-+
-+char *dyn_STATEDIR(void);
-+char *dyn_CACHEDIR(void);
-diff -uNr samba-3.0.10.orig/source/intl/lang_tdb.c samba-3.0.10/source/intl/lang_tdb.c
---- samba-3.0.10.orig/source/intl/lang_tdb.c	2004-12-17 03:50:08.000000000 -0800
-+++ samba-3.0.10/source/intl/lang_tdb.c	2004-12-17 03:55:29.000000000 -0800
-@@ -128,7 +128,7 @@
- 	if (!lang) 
- 		return True;
- 
--	asprintf(&msg_path, "%s.msg", lib_path((const char *)lang));
-+	asprintf(&msg_path, "%s.msg", data_path((const char *)lang));
- 	if (stat(msg_path, &st) != 0) {
- 		/* the msg file isn't available */
- 		DEBUG(10, ("lang_tdb_init: %s: %s\n", msg_path, 
-diff -uNr samba-3.0.21.orig/source/lib/account_pol.c samba-3.0.21/source/lib/account_pol.c
---- samba-3.0.21.orig/source/lib/account_pol.c	2005-12-20 15:28:38.000000000 +0000
-+++ samba-3.0.21/source/lib/account_pol.c	2005-12-23 11:41:08.000000000 +0000
-@@ -262,7 +262,7 @@
- 		return True;
- 	}
- 
--	tdb = tdb_open_log(lock_path("account_policy.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
-+	tdb = tdb_open_log(state_path("account_policy.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
- 	if (!tdb) {
- 		DEBUG(0,("Failed to open account policy database\n"));
- 		return False;
-diff -uNr samba-3.0.10.orig/source/lib/util.c samba-3.0.10/source/lib/util.c
---- samba-3.0.10.orig/source/lib/util.c	2004-12-17 03:50:08.000000000 -0800
-+++ samba-3.0.10/source/lib/util.c	2004-12-17 03:55:29.000000000 -0800
-@@ -2362,6 +2362,61 @@
- }
- 
- /**
-+ * @brief Returns an absolute path to a file in the Samba data directory.
-+ *
-+ * @param name File to find, relative to CODEPAGEDIR.
-+ *
-+ * @retval Pointer to a static #pstring containing the full path.
-+ **/
-+
-+char *data_path(const char *name)
-+{
-+	static pstring fname;
-+	snprintf(fname, sizeof(fname), "%s/%s", dyn_CODEPAGEDIR, name);
-+	return fname;
-+}
-+
-+/*****************************************************************
-+a useful function for returning a path in the Samba state directory
-+ *****************************************************************/
-+char *state_path(char *name)
-+{
-+	static pstring fname;
-+
-+	pstrcpy(fname,dyn_STATEDIR());
-+	trim_string(fname,"","/");
-+
-+	if (!directory_exist(fname,NULL)) {
-+		mkdir(fname,0755);
-+	}
-+
-+	pstrcat(fname,"/");
-+	pstrcat(fname,name);
-+
-+	return fname;
-+}
-+
-+/*****************************************************************
-+a useful function for returning a path in the Samba cache directory
-+ *****************************************************************/
-+char *cache_path(char *name)
-+{
-+	static pstring fname;
-+
-+	pstrcpy(fname,dyn_CACHEDIR());
-+	trim_string(fname,"","/");
-+
-+	if (!directory_exist(fname,NULL)) {
-+			mkdir(fname,0755);
-+	}
-+
-+	pstrcat(fname,"/");
-+	pstrcat(fname,name);
-+
-+	return fname;
-+}
-+
-+/**
-  * @brief Returns the platform specific shared library extension.
-  *
-  * @retval Pointer to a static #fstring containing the extension.
-diff -uNr samba-3.0.10.orig/source/lib/util_unistr.c samba-3.0.10/source/lib/util_unistr.c
---- samba-3.0.10.orig/source/lib/util_unistr.c	2004-12-17 03:50:08.000000000 -0800
-+++ samba-3.0.10/source/lib/util_unistr.c	2004-12-17 03:55:29.000000000 -0800
-@@ -54,11 +54,11 @@
- 	}
- 	initialised = 1;
- 
--	upcase_table = map_file(lib_path("upcase.dat"), 0x20000);
-+	upcase_table = map_file(data_path("upcase.dat"), 0x20000);
- 	upcase_table_use_unmap = ( upcase_table != NULL );
- 
--	lowcase_table = map_file(lib_path("lowcase.dat"), 0x20000);
-+	lowcase_table = map_file(data_path("lowcase.dat"), 0x20000);
- 	lowcase_table_use_unmap = ( lowcase_table != NULL );
- 
- #ifdef HAVE_SETLOCALE
- 	/* Get the name of the current locale.  */
-@@ -161,7 +161,7 @@
- 		return;
- 	}
- 
--	valid_file = map_file(lib_path("valid.dat"), 0x10000);
-+	valid_file = map_file(data_path("valid.dat"), 0x10000);
- 	if (valid_file) {
- 		valid_table = valid_file;
- 		mapped_file = 1;
-diff -uNr samba-3.0.10.orig/source/libsmb/samlogon_cache.c samba-3.0.10/source/libsmb/samlogon_cache.c
---- samba-3.0.10.orig/source/libsmb/samlogon_cache.c	2004-12-17 03:50:08.000000000 -0800
-+++ samba-3.0.10/source/libsmb/samlogon_cache.c	2004-12-17 03:55:29.000000000 -0800
-@@ -34,7 +34,7 @@
- BOOL netsamlogon_cache_init(void)
- {
- 	if (!netsamlogon_tdb) {
--		netsamlogon_tdb = tdb_open_log(lock_path(NETSAMLOGON_TDB), 0,
-+		netsamlogon_tdb = tdb_open_log(cache_path(NETSAMLOGON_TDB), 0,
- 						   TDB_DEFAULT, O_RDWR | O_CREAT, 0600);
- 	}
- 
-@@ -67,7 +67,7 @@
-            winbindd_cache.tdb open.  Open the tdb if a NULL is passed. */
- 
- 	if (!tdb) {
--		tdb = tdb_open_log(lock_path("winbindd_cache.tdb"), 5000,
-+		tdb = tdb_open_log(cache_path("winbindd_cache.tdb"), 5000,
- 				   TDB_DEFAULT, O_RDWR, 0600);
- 		if (!tdb) {
- 			DEBUG(5, ("netsamlogon_clear_cached_user: failed to open cache\n"));
-diff -uNr samba-3.0.10.orig/source/nmbd/nmbd_serverlistdb.c samba-3.0.10/source/nmbd/nmbd_serverlistdb.c
---- samba-3.0.10.orig/source/nmbd/nmbd_serverlistdb.c	2004-12-17 03:50:09.000000000 -0800
-+++ samba-3.0.10/source/nmbd/nmbd_serverlistdb.c	2004-12-17 03:55:29.000000000 -0800
-@@ -327,7 +327,7 @@
- 
- 	updatecount++;
-     
--	pstrcpy(fname,lp_lockdir());
-+	pstrcpy(fname,dyn_CACHEDIR());
- 	trim_char(fname,'\0' ,'/');
- 	pstrcat(fname,"/");
- 	pstrcat(fname,SERVER_LIST);
-diff -uNr samba-3.0.10.orig/source/nmbd/nmbd_winsserver.c samba-3.0.10/source/nmbd/nmbd_winsserver.c
---- samba-3.0.10.orig/source/nmbd/nmbd_winsserver.c	2004-12-17 03:50:09.000000000 -0800
-+++ samba-3.0.10/source/nmbd/nmbd_winsserver.c	2004-12-17 03:55:30.000000000 -0800
-@@ -234,7 +234,7 @@
- 
- 	add_samba_names_to_subnet(wins_server_subnet);
- 
--	if((fp = x_fopen(lock_path(WINS_LIST),O_RDONLY,0)) == NULL) {
-+	if((fp = x_fopen(state_path(WINS_LIST),O_RDONLY,0)) == NULL) {
- 		DEBUG(2,("initialise_wins: Can't open wins database file %s. Error was %s\n",
- 			WINS_LIST, strerror(errno) ));
- 		return True;
-@@ -1810,7 +1810,7 @@
- 		}
- 	}
- 
--	slprintf(fname,sizeof(fname)-1,"%s/%s", lp_lockdir(), WINS_LIST);
-+	slprintf(fname,sizeof(fname)-1,"%s/%s", dyn_STATEDIR(), WINS_LIST);
- 	all_string_sub(fname,"//", "/", 0);
- 	slprintf(fnamenew,sizeof(fnamenew)-1,"%s.%u", fname, (unsigned int)sys_getpid());
- 
-diff -uNr samba-3.0.23.orig/source/nsswitch/winbindd_cache.c samba-3.0.23/source/nsswitch/winbindd_cache.c
---- samba-3.0.23.orig/source/nsswitch/winbindd_cache.c	2006-07-15 09:50:09.000000000 -0400
-+++ samba-3.0.23/source/nsswitch/winbindd_cache.c	2006-07-15 09:55:30.000000000 -0400
-@@ -57,7 +57,7 @@
- 		return True;
- 
- 	/* when working offline we must not clear the cache on restart */
--	wcache->tdb = tdb_open_log(lock_path("winbindd_cache.tdb"),
-+	wcache->tdb = tdb_open_log(cache_path("winbindd_cache.tdb"),
- 				WINBINDD_CACHE_TDB_DEFAULT_HASH_SIZE, 
- 				TDB_DEFAULT /*TDB_CLEAR_IF_FIRST*/, O_RDWR|O_CREAT, 0600);
- 
-diff -uNr samba-3.0.10.orig/source/nsswitch/winbindd_util.c samba-3.0.10/source/nsswitch/winbindd_util.c
---- samba-3.0.10.orig/source/nsswitch/winbindd_util.c	2004-12-17 03:50:09.000000000 -0800
-+++ samba-3.0.10/source/nsswitch/winbindd_util.c	2004-12-17 03:55:30.000000000 -0800
-@@ -957,7 +957,7 @@
- 	SMB_STRUCT_STAT stbuf;
- 	TDB_CONTEXT *idmap_tdb;
- 
--	pstrcpy(idmap_name, lock_path("winbindd_idmap.tdb"));
-+	pstrcpy(idmap_name, state_path("winbindd_idmap.tdb"));
- 
- 	if (!file_exist(idmap_name, &stbuf)) {
- 		/* nothing to convert return */
-diff -uNr samba-3.0.10.orig/source/param/loadparm.c samba-3.0.10/source/param/loadparm.c
---- samba-3.0.10.orig/source/param/loadparm.c	2004-12-17 03:50:09.000000000 -0800
-+++ samba-3.0.10/source/param/loadparm.c	2004-12-17 03:55:30.000000000 -0800
-@@ -104,6 +104,9 @@
- 	char *szAddPrinterCommand;
- 	char *szDeletePrinterCommand;
- 	char *szOs2DriverMap;
-+#ifdef FHS_COMPATIBLE
-+	char *szLockDirStub;
-+#endif
- 	char *szLockDir;
- 	char *szPidDir;
- 	char *szRootdir;
-@@ -1105,8 +1108,13 @@
- 	{"config file", P_STRING, P_GLOBAL, &Globals.szConfigFile, NULL, NULL, FLAG_HIDE}, 
- 	{"preload", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED}, 
- 	{"auto services", P_STRING, P_GLOBAL, &Globals.szAutoServices, NULL, NULL, FLAG_ADVANCED}, 
-+#ifdef FHS_COMPATIBLE
-+	{"lock directory", P_STRING, P_GLOBAL, &Globals.szLockDirStub, NULL, NULL, 0}, 
-+	{"lock dir", P_STRING, P_GLOBAL, &Globals.szLockDirStub, NULL, NULL, 0},
-+#else
- 	{"lock directory", P_STRING, P_GLOBAL, &Globals.szLockDir, NULL, NULL, FLAG_ADVANCED}, 
- 	{"lock dir", P_STRING, P_GLOBAL, &Globals.szLockDir, NULL, NULL, FLAG_HIDE}, 
-+#endif
- 	{"pid directory", P_STRING, P_GLOBAL, &Globals.szPidDir, NULL, NULL, FLAG_ADVANCED}, 
- #ifdef WITH_UTMP
- 	{"utmp directory", P_STRING, P_GLOBAL, &Globals.szUtmpDir, NULL, NULL, FLAG_ADVANCED}, 
-diff -uNr samba-3.0.23.orig/source/passdb/pdb_tdb.c samba-3.0.23/source/passdb/pdb_tdb.c
---- samba-3.0.23.orig/source/passdb/pdb_tdb.c	2006-07-15 09:50:09.000000000 -0400
-+++ samba-3.0.23/source/passdb/pdb_tdb.c	2006-07-15 09:55:30.000000000 -0400
-@@ -1598,7 +1598,7 @@
- 	/* save the path for later */
- 			   
- 	if ( !location ) {
--		pstr_sprintf( tdbfile, "%s/%s", lp_private_dir(), PASSDB_FILE_NAME );
-+		pstr_sprintf( tdbfile, "%s", state_path(PASSDB_FILE_NAME) );
- 		pfile = tdbfile;
- 	}
- 	pstrcpy( tdbsam_filename, pfile );
-diff -uNr samba-3.0.10.orig/source/passdb/secrets.c samba-3.0.10/source/passdb/secrets.c
---- samba-3.0.10.orig/source/passdb/secrets.c	2004-12-17 03:50:09.000000000 -0800
-+++ samba-3.0.10/source/passdb/secrets.c	2004-12-17 03:55:30.000000000 -0800
-@@ -55,8 +55,7 @@
- 	if (tdb)
- 		return True;
- 
--	pstrcpy(fname, lp_private_dir());
--	pstrcat(fname,"/secrets.tdb");
-+	pstrcpy(fname, state_path("secrets.tdb"));
- 
- 	tdb = tdb_open_log(fname, 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
- 
-diff -uNr samba-3.0.10.orig/source/printing/nt_printing.c samba-3.0.10/source/printing/nt_printing.c
---- samba-3.0.10.orig/source/printing/nt_printing.c	2004-12-17 03:50:09.000000000 -0800
-+++ samba-3.0.10/source/printing/nt_printing.c	2004-12-17 03:55:31.000000000 -0800
-@@ -298,28 +298,28 @@
-  
- 	if (tdb_drivers)
- 		tdb_close(tdb_drivers);
--	tdb_drivers = tdb_open_log(lock_path("ntdrivers.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
-+	tdb_drivers = tdb_open_log(state_path("ntdrivers.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
- 	if (!tdb_drivers) {
- 		DEBUG(0,("nt_printing_init: Failed to open nt drivers database %s (%s)\n",
--			lock_path("ntdrivers.tdb"), strerror(errno) ));
-+			state_path("ntdrivers.tdb"), strerror(errno) ));
- 		return False;
- 	}
-  
- 	if (tdb_printers)
- 		tdb_close(tdb_printers);
--	tdb_printers = tdb_open_log(lock_path("ntprinters.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
-+	tdb_printers = tdb_open_log(state_path("ntprinters.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
- 	if (!tdb_printers) {
- 		DEBUG(0,("nt_printing_init: Failed to open nt printers database %s (%s)\n",
--			lock_path("ntprinters.tdb"), strerror(errno) ));
-+			state_path("ntprinters.tdb"), strerror(errno) ));
- 		return False;
- 	}
-  
- 	if (tdb_forms)
- 		tdb_close(tdb_forms);
--	tdb_forms = tdb_open_log(lock_path("ntforms.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
-+	tdb_forms = tdb_open_log(state_path("ntforms.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
- 	if (!tdb_forms) {
- 		DEBUG(0,("nt_printing_init: Failed to open nt forms database %s (%s)\n",
--			lock_path("ntforms.tdb"), strerror(errno) ));
-+			state_path("ntforms.tdb"), strerror(errno) ));
- 		return False;
- 	}
-  
-diff -uNr samba-3.0.10.orig/source/printing/printing.c samba-3.0.10/source/printing/printing.c
---- samba-3.0.10.orig/source/printing/printing.c	2004-12-17 03:50:09.000000000 -0800
-+++ samba-3.0.10/source/printing/printing.c	2004-12-17 03:55:31.000000000 -0800
-@@ -177,8 +177,8 @@
- 	int services = lp_numservices();
- 	int snum;
- 
--	unlink(lock_path("printing.tdb"));
--	pstrcpy(printing_path,lock_path("printing"));
-+	unlink(cache_path("printing.tdb"));
-+	pstrcpy(printing_path,cache_path("printing"));
- 	mkdir(printing_path,0755);
- 
- 	/* handle a Samba upgrade */
-diff -uNr samba-3.0.10.orig/source/printing/printing_db.c samba-3.0.10/source/printing/printing_db.c
---- samba-3.0.10.orig/source/printing/printing_db.c	2004-12-17 03:50:09.000000000 -0800
-+++ samba-3.0.10/source/printing/printing_db.c	2004-12-17 03:55:31.000000000 -0800
-@@ -89,7 +89,7 @@
- 		DLIST_ADD(print_db_head, p);
- 	}
- 
--	pstrcpy(printdb_path, lock_path("printing/"));
-+	pstrcpy(printdb_path, cache_path("printing/"));
- 	pstrcat(printdb_path, printername);
- 	pstrcat(printdb_path, ".tdb");
- 
-diff -uNr samba-3.0.21.orig/source/registry/reg_db.c samba-3.0.21/source/registry/reg_db.c
---- samba-3.0.21.orig/source/registry/reg_db.c	2005-10-18 02:45:06.000000000 +0000
-+++ samba-3.0.21/source/registry/reg_db.c	2005-12-23 11:48:19.000000000 +0000
-@@ -205,12 +205,12 @@
- 	if ( tdb_reg )
- 		return True;
- 
--	if ( !(tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) )
-+	if ( !(tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600)) )
- 	{
--		tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
-+		tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
- 		if ( !tdb_reg ) {
- 			DEBUG(0,("regdb_init: Failed to open registry %s (%s)\n",
--				lock_path("registry.tdb"), strerror(errno) ));
-+				state_path("registry.tdb"), strerror(errno) ));
- 			return False;
- 		}
- 		
-@@ -252,11 +252,11 @@
- 	
- 	become_root();
- 
--	tdb_reg = tdb_open_log(lock_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600);
-+	tdb_reg = tdb_open_log(state_path("registry.tdb"), 0, TDB_DEFAULT, O_RDWR, 0600);
- 	if ( !tdb_reg ) {
- 		result = ntstatus_to_werror( map_nt_error_from_unix( errno ) );
- 		DEBUG(0,("regdb_open: Failed to open %s! (%s)\n", 
--			lock_path("registry.tdb"), strerror(errno) ));
-+			state_path("registry.tdb"), strerror(errno) ));
- 	}
- 
- 	unbecome_root();
-diff -uNr samba-3.0.23.orig/source/lib/sharesec.c samba-3.0.23/source/lib/sharesec.c
---- samba-3.0.23.orig/source/lib/sharesec.c	2006-07-15 09:50:09.000000000 -0400
-+++ samba-3.0.23/source/lib/sharesec.c	2006-07-15 09:55:31.000000000 -0400
-@@ -47,10 +47,10 @@
- 		return True;
- 	}
- 
--	share_tdb = tdb_open_log(lock_path("share_info.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
-+	share_tdb = tdb_open_log(state_path("share_info.tdb"), 0, TDB_DEFAULT, O_RDWR|O_CREAT, 0600);
- 	if (!share_tdb) {
- 		DEBUG(0,("Failed to open share info database %s (%s)\n",
--			lock_path("share_info.tdb"), strerror(errno) ));
-+			state_path("share_info.tdb"), strerror(errno) ));
- 		return False;
- 	}
-  
-diff -uNr samba-3.0.10.orig/source/sam/idmap_tdb.c samba-3.0.10/source/sam/idmap_tdb.c
---- samba-3.0.10.orig/source/sam/idmap_tdb.c	2004-12-17 03:50:09.000000000 -0800
-+++ samba-3.0.10/source/sam/idmap_tdb.c	2004-12-17 03:55:31.000000000 -0800
-@@ -487,7 +487,7 @@
- 	BOOL tdb_is_new = False;
- 
- 	/* use the old database if present */
--	tdbfile = SMB_STRDUP(lock_path("winbindd_idmap.tdb"));
-+	tdbfile = SMB_STRDUP(state_path("winbindd_idmap.tdb"));
- 	if (!tdbfile) {
- 		DEBUG(0, ("idmap_init: out of memory!\n"));
- 		return NT_STATUS_NO_MEMORY;
-diff -uNr samba-3.0.23.orig/source/smbd/lanman.c samba-3.0.23/source/smbd/lanman.c
---- samba-3.0.23.orig/source/smbd/lanman.c	2006-07-15 09:50:10.000000000 -0400
-+++ samba-3.0.23/source/smbd/lanman.c	2006-07-15 09:55:31.000000000 -0400
-@@ -1052,9 +1052,9 @@
- 	BOOL local_list_only;
- 	int i;
- 
--	lines = file_lines_load(lock_path(SERVER_LIST), NULL, 0);
-+	lines = file_lines_load(cache_path(SERVER_LIST), NULL, 0);
- 	if (!lines) {
--		DEBUG(4,("Can't open %s - %s\n",lock_path(SERVER_LIST),strerror(errno)));
-+		DEBUG(4,("Can't open %s - %s\n",cache_path(SERVER_LIST),strerror(errno)));
- 		return 0;
- 	}
-
-diff -uNr samba-3.0.10.orig/source/utils/net_idmap.c samba-3.0.10/source/utils/net_idmap.c
---- samba-3.0.10.orig/source/utils/net_idmap.c	2004-12-17 03:50:10.000000000 -0800
-+++ samba-3.0.10/source/utils/net_idmap.c	2004-12-17 03:55:32.000000000 -0800
-@@ -126,7 +126,7 @@
- 		return NT_STATUS_UNSUCCESSFUL;
- 	}
- 
--	tdbfile = SMB_STRDUP(lock_path("winbindd_idmap.tdb"));
-+	tdbfile = SMB_STRDUP(state_path("winbindd_idmap.tdb"));
- 	if (!tdbfile) {
- 		DEBUG(0, ("idmap_init: out of memory!\n"));
- 		return NT_STATUS_NO_MEMORY;
-diff -uNr samba-3.0.11.orig/source/printing/nt_printing.c samba-3.0.11/source/printing/nt_printing.c
---- samba-3.0.11.orig/source/printing/nt_printing.c	2005-03-23 02:51:08.000000000 -0800
-+++ samba-3.0.11/source/printing/nt_printing.c	2005-03-23 02:54:33.000000000 -0800
-@@ -2065,7 +2065,7 @@
- 	close_all_print_db();
- 
- 	if (geteuid() == 0) {
--		pstrcpy(printdb_path, lock_path("printing/"));
-+		pstrcpy(printdb_path, cache_path("printing/"));
- 		pstrcat(printdb_path, sharename);
- 		pstrcat(printdb_path, ".tdb");
- 

packaging/Debian/debian-sarge/patches/installswat.sh.patch

@@ -1,15 +0,0 @@
---- samba-3.0.1/source/script/installswat.sh.orig	2004-01-13 13:43:42.000000000 -0500
-+++ samba-3.0.1/source/script/installswat.sh	2004-01-13 12:56:49.000000000 -0500
-@@ -114,7 +114,11 @@
- 
- # Install Using Samba book (but only if it is there)
- 
--if [ "x$BOOKDIR" != "x" -a -f $SRCDIR../docs/htmldocs/using_samba/toc.html ]; then
-+# Under Debian we don't actually install the book. The book is part of
-+# the samba-doc package, so we just provide a symlink that points to
-+# where the book is actually installed. The symlink is created in
-+# debian/rules.
-+if /bin/false; then
- 
-     # Create directories
- 

packaging/Debian/debian-sarge/patches/make-distclean.patch

@@ -1,19 +0,0 @@
-diff -uNr samba-3.0.7.orig/source/Makefile.in samba-3.0.7/source/Makefile.in
---- samba-3.0.7.orig/source/Makefile.in	2004-10-25 10:06:08.000000000 -0700
-+++ samba-3.0.7/source/Makefile.in	2004-10-25 10:03:31.000000000 -0700
-@@ -1371,6 +1371,7 @@
- 
- python_clean:
- 	@-if test -n "$(PYTHON)"; then $(PYTHON) python/setup.py clean; fi
-+	@-rm -rf build/
- 
- # revert to the previously installed version
- revert:
-@@ -1512,6 +1514,7 @@
- 
- distclean: realclean
- 	-rm -f include/stamp-h
-+	-rm -f script/gen-8bit-gap.sh smbadduser
- 	-rm -f include/config.h Makefile
- 	-rm -f config.status config.cache so_locations
- 	-rm -rf .deps TAGS

packaging/Debian/debian-sarge/patches/nmbd-signalling.patch

@@ -1,20 +0,0 @@
-diff -uNr samba-2.999+3.0.alpha21.orig/source/nmbd/nmbd_subnetdb.c samba-2.999+3.0.alpha21/source/nmbd/nmbd_subnetdb.c
---- samba-2.999+3.0.alpha21.orig/source/nmbd/nmbd_subnetdb.c	2002-11-26 20:54:19.000000000 -0600
-+++ samba-2.999+3.0.alpha21/source/nmbd/nmbd_subnetdb.c	2002-12-16 23:34:13.000000000 -0600
-@@ -214,12 +214,16 @@
-	extern struct in_addr loopback_ip;
- 
-	if(num_interfaces == 0) {
-+		void (*old_handler)(int);
-+
-		DEBUG(0,("create_subnets: No local interfaces !\n"));
-		DEBUG(0,("create_subnets: Waiting for an interface to appear ...\n"));
-+		old_handler = CatchSignal( SIGTERM, SIGNAL_CAST SIG_DFL );
-		while (iface_count() == 0) {
-			sleep(5);
-			load_interfaces();
-		}
-+		CatchSignal( SIGTERM, SIGNAL_CAST old_handler );
-	}
- 
-	num_interfaces = iface_count();

packaging/Debian/debian-sarge/patches/non-linux-ports.patch

@@ -1,62 +0,0 @@
-diff -uNr samba-3.0.11.orig/source/configure.in samba-3.0.11/source/configure.in
---- samba-3.0.11.orig/source/configure.in	2005-03-23 02:39:11.000000000 -0800
-+++ samba-3.0.11/source/configure.in	2005-03-23 02:43:01.000000000 -0800
-@@ -573,6 +573,15 @@
-       fi
-     ;;
- 
-+# Systems with LFS support.
-+#
-+    gnu* | k*bsd*-gnu)
-+	CPPFLAGS="-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE $CPPFLAGS"
-+	AC_DEFINE(_LARGEFILE64_SOURCE, 1, [Whether to enable large file support])
-+	AC_DEFINE(_FILE_OFFSET_BITS, 64, [File offset bits])
-+	AC_DEFINE(_GNU_SOURCE, 1, [Whether to use GNU libc extensions])
-+	;;
-+
- # Tests for linux LFS support. Need kernel 2.4 and glibc2.2 or greater support.
- #
-     *linux*)
-@@ -1040,7 +1049,7 @@
- # 
- #
- case "$host_os" in
--    *linux*)
-+    linux*-gnu* | gnu* | k*bsd*-gnu)
-        # glibc <= 2.3.2 has a broken getgrouplist
-        AC_TRY_RUN([
- #include <unistd.h>
-@@ -1172,7 +1181,10 @@
- 
-   # and these are for particular systems
-   case "$host_os" in
--		*linux*)   AC_DEFINE(LINUX,1,[Whether the host os is linux])
-+		linux*-gnu* | gnu* | k*bsd*-gnu)
-+			case "$host_os" in linux*)
-+				AC_DEFINE(LINUX,1,[Whether the host os is linux]) ;;
-+			esac
- 			BLDSHARED="true"
- 			if test "${ac_cv_gnu_ld_no_default_allow_shlib_undefined}" = "yes"; then
- 				LDSHFLAGS="-shared -Wl,-Bsymbolic -Wl,--allow-shlib-undefined" 
-@@ -4044,7 +4056,7 @@
- 	AC_MSG_RESULT(yes);
- 
- 	case "$host_os" in
--	*linux*)
-+	linux*-gnu* | gnu* | k*bsd*-gnu)
- 		AC_CACHE_CHECK([for linux sendfile64 support],samba_cv_HAVE_SENDFILE64,[
- 		AC_TRY_LINK([#include <sys/sendfile.h>],
- [\
-@@ -4307,10 +4319,10 @@
- WINBIND_NSS_LDSHFLAGS=$LDSHFLAGS
- 
- case "$host_os" in
--	*linux*)
-+	linux*-gnu* | gnu* | k*bsd*-gnu)
- 		WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_linux.o"
- 		;;
--	*freebsd[[5-9]]*)
-+	freebsd5*|*freebsd[[6-9]]*)
- 		# FreeBSD winbind client is implemented as a wrapper around
- 		# the Linux version.
- 		WINBIND_NSS_EXTRA_OBJS="nsswitch/winbind_nss_freebsd.o \

packaging/Debian/debian-sarge/patches/samba.patch

@@ -1,65 +0,0 @@
-diff -uNr samba-3.0.0beta1.orig/source/client/smbmount.c samba-3.0.0beta1/source/client/smbmount.c
---- samba-3.0.0beta1.orig/source/client/smbmount.c	2003-06-07 12:57:32.000000000 -0500
-+++ samba-3.0.0beta1/source/client/smbmount.c	2003-06-30 20:12:22.000000000 -0500
-@@ -766,7 +766,7 @@
- 					*lp = 0;
- 					pstrcpy(password,lp+1);
- 					got_pass = True;
--					memset(strchr_m(opteq+1,'%')+1,'X',strlen(password));
-+					memset(strchr_m(opteq+1,'%')+1,'\0',strlen(password));
- 				}
- 				if ((lp=strchr_m(username,'/'))) {
- 					*lp = 0;
-@@ -776,7 +776,7 @@
- 				  !strcmp(opts, "password")) {
- 				pstrcpy(password,opteq+1);
- 				got_pass = True;
--				memset(opteq+1,'X',strlen(password));
-+				memset(opteq+1,'\0',strlen(password));
- 			} else if(!strcmp(opts, "credentials")) {
- 				pstrcpy(credentials,opteq+1);
- 			} else if(!strcmp(opts, "netbiosname")) {
-@@ -890,7 +902,7 @@
- 			*p = 0;
- 			pstrcpy(password,p+1);
- 			got_pass = True;
--			memset(strchr_m(getenv("USER"),'%')+1,'X',strlen(password));
-+			memset(strchr_m(getenv("USER"),'%')+1,'\0',strlen(password));
- 		}
- 		strupper_m(username);
- 	}
-diff -uNr samba-3.0.0beta1.orig/source/web/diagnose.c samba-3.0.0beta1/source/web/diagnose.c
---- samba-3.0.0beta1.orig/source/web/diagnose.c	2003-06-07 12:57:41.000000000 -0500
-+++ samba-3.0.0beta1/source/web/diagnose.c	2003-06-30 20:12:22.000000000 -0500
-@@ -66,6 +66,7 @@
- 	static struct cli_state cli;
- 	extern struct in_addr loopback_ip;
- 
-+	loopback_ip.s_addr = htonl((127 << 24) + 1);
- 	if (!cli_initialise(&cli))
- 		return False;
- 
---- samba-3.0.23/source/script/installbin.sh.in.orig	2006-07-15 09:08:36.000000000 -0400
-+++ samba-3.0.23/source/script/installbin.sh.in	2006-07-15 09:51:45.000000000 -0400
-@@ -21,13 +21,14 @@
-  chmod $INSTALLPERMS $DESTDIR/$BINDIR/$p2
- 
-  # this is a special case, mount needs this in a specific location
-- if [ $p2 = smbmount ]; then
--   if [ ! -d $DESTDIR/@rootsbindir@ ]; then
--      mkdir $DESTDIR/@rootsbindir@
--   fi
--   echo "Creating sym link $DESTDIR/@rootsbindir@/mount.smbfs to $BINDIR/$p2 "
--   ln -sf $BINDIR/$p2 $DESTDIR/@rootsbindir@/mount.smbfs
-- fi
-+# Commented out for the Debian Samba package. We take care of this
-+# important symlink in debian/rules. (peloy@debian.org)
-+# if [ $p2 = smbmount ]; then
-+#   if [ ! -d $DESTDIR/sbin ]; then
-+#      mkdir $DESTDIR/sbin
-+#   fi 
-+#   ln -sf $BINDIR/$p2 $DESTDIR/sbin/mount.smbfs
-+# fi
- done
- 
- 

packaging/Debian/debian-sarge/patches/smbclient-pager.patch

@@ -1,12 +0,0 @@
-diff -uNr samba-2.999+3.0cvs20020906.orig/source/include/local.h samba-2.999+3.0cvs20020906/source/include/local.h
---- samba-2.999+3.0cvs20020906.orig/source/include/local.h	2002-09-04 14:13:06.000000000 -0500
-+++ samba-2.999+3.0cvs20020906/source/include/local.h	2002-09-08 14:19:24.000000000 -0500
-@@ -109,7 +109,7 @@
- /* the default pager to use for the client "more" command. Users can
-    override this with the PAGER environment variable */
- #ifndef PAGER
--#define PAGER "more"
-+#define PAGER "/usr/bin/pager"
- #endif
- 
- /* the size of the uid cache used to reduce valid user checks */

packaging/Debian/debian-sarge/patches/smbclient-tar.patch.unused

@@ -1,43 +0,0 @@
-diff -uNr samba-3.0.0beta2.orig/source/client/client.c samba-3.0.0beta2/source/client/client.c
---- samba-3.0.0beta2.orig/source/client/client.c	2003-07-01 22:36:24.000000000 -0500
-+++ samba-3.0.0beta2/source/client/client.c	2003-07-06 15:17:36.000000000 -0500
-@@ -2773,6 +2773,7 @@
- 	int opt;
- 	pstring query_host;
- 	BOOL message = False;
-+	char* tar_args = NULL;
- 	extern char tar_type;
- 	pstring term_code;
- 	static const char *new_name_resolve_order = NULL;
-@@ -2816,7 +2817,7 @@
- 			max_protocol = interpret_protocol(poptGetOptArg(pc), max_protocol);
- 			break;
- 		case 'T':
--			if (!tar_parseargs(argc, argv, poptGetOptArg(pc), optind)) {
-+			if (!(tar_args = poptGetOptArg(pc))) {
- 				poptPrintUsage(pc, stderr, 0);
- 				exit(1);
- 			}
-@@ -2917,6 +2917,22 @@
- 		pstrcpy(cmdline_auth_info.password,poptGetArg(pc));  
- 	}
- 
-+	/* The tar command may take a number of string options; pass
-+	   everything we have left to tar_parseargs(). */
-+	if (tar_args) {
-+		const char **argv2 = poptGetArgs(pc);
-+		int argc2 = 0;
-+
-+		if (argv2) {
-+			while (argv2[argc2]) argc2++;
-+		}
-+		
-+		if (!tar_parseargs(argc2, argv2, tar_args, 0)) {
-+			poptPrintUsage(pc, stderr, 0);
-+			exit(1);
-+		}
-+	}
-+
- 	init_names();
- 
- 	if(new_name_resolve_order)

packaging/Debian/debian-sarge/patches/smbmount-mtab-flags.patch

@@ -1,15 +0,0 @@
-diff -ur samba-2.2.4.orig/source/client/smbmnt.c samba-2.2.4/source/client/smbmnt.c
---- samba-2.2.4.orig/source/client/smbmnt.c	Sun Apr  8 15:22:51 2001
-+++ samba-2.2.4/source/client/smbmnt.c	Sun May  5 16:42:29 2002
-@@ -259,7 +259,10 @@
-         ment.mnt_fsname = share_name ? share_name : "none";
-         ment.mnt_dir = mount_point;
-         ment.mnt_type = "smbfs";
--        ment.mnt_opts = "";
-+	if (mount_ro)
-+                ment.mnt_opts = "ro";
-+        else
-+                ment.mnt_opts = "rw";
-         ment.mnt_freq = 0;
-         ment.mnt_passno= 0;
- 

packaging/Debian/debian-sarge/patches/smbmount-nomtab.patch

@@ -1,160 +0,0 @@
-diff -uNr samba-3.0alpha22.orig/source/client/smbmnt.c samba-3.0alpha22/source/client/smbmnt.c
---- samba-3.0alpha22.orig/source/client/smbmnt.c	2003-03-15 12:11:39.000000000 -0600
-+++ samba-3.0alpha22/source/client/smbmnt.c	2003-03-15 12:11:49.000000000 -0600
-@@ -28,6 +28,7 @@
- static uid_t mount_uid;
- static gid_t mount_gid;
- static int mount_ro;
-+static int no_mtab;
- static unsigned mount_fmask;
- static unsigned mount_dmask;
- static int user_mount;
-@@ -40,6 +41,7 @@
-         printf("Usage: smbmnt mount-point [options]\n");
- 	printf("Version %s\n\n",VERSION);
-         printf("-s share       share name on server\n"
-+               "-n             don't update /etc/mtab\n"
-                "-r             mount read-only\n"
-                "-u uid         mount as uid\n"
-                "-g gid         mount as gid\n"
-@@ -54,7 +56,7 @@
- {
-         int opt;
- 
--        while ((opt = getopt (argc, argv, "s:u:g:rf:d:o:")) != EOF)
-+        while ((opt = getopt (argc, argv, "s:u:g:nrf:d:o:")) != EOF)
- 	{
-                 switch (opt)
- 		{
-@@ -71,6 +73,9 @@
- 				mount_gid = strtol(optarg, NULL, 0);
- 			}
-                         break;
-+		case 'n':
-+			no_mtab = 1;
-+			break;
-                 case 'r':
-                         mount_ro = 1;
-                         break;
-@@ -274,36 +279,38 @@
- 		return -1;
- 	}
- 	
--        if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1)
--        {
--                fprintf(stderr, "Can't get "MOUNTED"~ lock file");
--                return 1;
--        }
--        close(fd);
-+	if (!no_mtab) {
-+		if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1)
-+		{
-+			fprintf(stderr, "Can't get "MOUNTED"~ lock file");
-+			return 1;
-+		}
-+		close(fd);
- 	
--        if ((mtab = setmntent(MOUNTED, "a+")) == NULL)
--        {
--                fprintf(stderr, "Can't open " MOUNTED);
--                return 1;
--        }
-+		if ((mtab = setmntent(MOUNTED, "a+")) == NULL)
-+		{
-+			fprintf(stderr, "Can't open " MOUNTED);
-+			return 1;
-+		}
- 
--        if (addmntent(mtab, &ment) == 1)
--        {
--                fprintf(stderr, "Can't write mount entry");
--                return 1;
--        }
--        if (fchmod(fileno(mtab), 0644) == -1)
--        {
--                fprintf(stderr, "Can't set perms on "MOUNTED);
--                return 1;
--        }
--        endmntent(mtab);
-+		if (addmntent(mtab, &ment) == 1)
-+		{
-+			fprintf(stderr, "Can't write mount entry");
-+			return 1;
-+		}
-+		if (fchmod(fileno(mtab), 0644) == -1)
-+		{
-+			fprintf(stderr, "Can't set perms on "MOUNTED);
-+			return 1;
-+		}
-+		endmntent(mtab);
- 
--        if (unlink(MOUNTED"~") == -1)
--        {
--                fprintf(stderr, "Can't remove "MOUNTED"~");
--                return 1;
--        }
-+		if (unlink(MOUNTED"~") == -1)
-+		{
-+			fprintf(stderr, "Can't remove "MOUNTED"~");
-+			return 1;
-+		}
-+	}
- 
- 	return 0;
- }	
-diff -uNr samba-3.0alpha22.orig/source/client/smbmount.c samba-3.0alpha22/source/client/smbmount.c
---- samba-3.0alpha22.orig/source/client/smbmount.c	2003-03-15 12:04:29.000000000 -0600
-+++ samba-3.0alpha22/source/client/smbmount.c	2003-03-15 12:15:10.000000000 -0600
-@@ -48,6 +48,7 @@
- static int mount_ro;
- static unsigned mount_fmask;
- static unsigned mount_dmask;
-+static BOOL no_mtab = False;
- static BOOL use_kerberos;
- /* TODO: Add code to detect smbfs version in kernel */
- static BOOL status32_smbfs = False;
-@@ -273,6 +274,9 @@
-                 return;
-         }
- 
-+	if (no_mtab)
-+		return;
-+
-         if ((fd = open(MOUNTED"~", O_RDWR|O_CREAT|O_EXCL, 0600)) == -1) {
-                 DEBUG(0,("%d: Can't get "MOUNTED"~ lock file", sys_getpid()));
-                 return;
-@@ -467,6 +471,9 @@
- 	args[i++] = "-s";
- 	args[i++] = svc2;
- 
-+	if (no_mtab) {
-+		args[i++] = "-n";
-+	}
- 	if (mount_ro) {
- 		args[i++] = "-r";
- 	}
-@@ -662,7 +669,7 @@
- ****************************************************************************/
- static void usage(void)
- {
--	printf("Usage: mount.smbfs service mountpoint [-o options,...]\n");
-+	printf("Usage: mount.smbfs service mountpoint [-n] [-o options,...]\n");
- 
- 	printf("Version %s\n\n",VERSION);
- 
-@@ -740,8 +747,13 @@
- 	argc -= 2;
- 	argv += 2;
- 
--	opt = getopt(argc, argv, "o:");
--	if(opt != 'o') {
-+	opt = getopt(argc, argv, "no:");
-+	if (opt == 'n') {
-+		DEBUG(3,("No mtab!\n"));
-+		no_mtab = True;
-+		opt = getopt(argc, argv, "o:");
-+	}
-+	if (opt != 'o') {
- 		return;
- 	}
- 

packaging/Debian/debian-sarge/patches/smbstatus-locking.patch

@@ -1,20 +0,0 @@
-diff -uNr samba-2.999+3.0.alpha21.orig/source/utils/status.c samba-2.999+3.0.alpha21/source/utils/status.c
---- samba-2.999+3.0.alpha21.orig/source/utils/status.c	2002-11-26 20:54:22.000000000 -0600
-+++ samba-2.999+3.0.alpha21/source/utils/status.c	2002-12-16 23:37:14.000000000 -0600
-@@ -686,6 +686,16 @@
- 	if (!shares_only) {
- 		int ret;
- 
-+		tdb = tdb_open_log(lock_path("locking.tdb"), 0, TDB_DEFAULT, O_RDONLY, 0);
-+
-+		if (!tdb) {
-+			d_printf("%s not initialised\n", lock_path("locking.tdb"));
-+			d_printf("This is normal if an SMB client has never connected to your server.\n");
-+			exit(0);
-+		} else {
-+			tdb_close(tdb);
-+		}
-+
- 		if (!locking_init(1)) {
- 			d_printf("Can't initialise locking module - exiting\n");
- 			exit(1);

packaging/Debian/debian-sarge/patches/undefined-symbols.patch

@@ -1,22 +0,0 @@
-diff -uNr samba-3.0.11.orig/source/Makefile.in samba-3.0.11/source/Makefile.in
---- samba-3.0.11.orig/source/Makefile.in	2005-03-23 02:40:40.000000000 -0800
-+++ samba-3.0.11/source/Makefile.in	2005-03-23 02:48:59.000000000 -0800
-@@ -631,7 +631,8 @@
- 	    $(RPC_ECHO_OBJ) $(SMBLDAP_OBJ) $(IDMAP_OBJ) libsmb/spnego.o $(PASSCHANGE_OBJ)
- 
- WINBIND_WINS_NSS_OBJ = nsswitch/wins.o $(PARAM_OBJ) \
--	$(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(NSSWINS_OBJ) $(KRBCLIENT_OBJ)
-+	$(LIBSMB_OBJ) $(LIB_NONSMBD_OBJ) $(NSSWINS_OBJ) $(KRBCLIENT_OBJ) \
-+	$(SECRETS_OBJ)
- 
- WINBIND_WINS_NSS_PICOBJS = $(WINBIND_WINS_NSS_OBJ:.o=.@PICSUFFIX@)
- 
-@@ -997,7 +998,7 @@
- 
- bin/libsmbclient.@SHLIBEXT@: $(LIBSMBCLIENT_PICOBJS)
- 	@echo Linking libsmbclient shared library $@
--	@$(SHLD) $(LDSHFLAGS) -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \
-+	@$(SHLD) $(LDSHFLAGS) -Wl,-z,defs -o $@ $(LIBSMBCLIENT_PICOBJS) $(LDFLAGS) $(LIBS) \
- 		$(KRB5LIBS) $(LDAP_LIBS) \
- 		@SONAMEFLAG@`basename $@`.$(LIBSMBCLIENT_MAJOR)
- 

packaging/Debian/debian-sarge/po/POTFILES.in

@@ -1,3 +0,0 @@
-[type: gettext/rfc822deb] samba-common.templates
-[type: gettext/rfc822deb] samba.templates
-[type: gettext/rfc822deb] swat.templates

packaging/Debian/debian-sarge/po/ca.po

@@ -1,291 +0,0 @@
-# samba (debconf) translation to Catalan.
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
-# Aleix Badia i Bosch <abadia@ica.es> 2004
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: samba_3.0.0beta2-1_templates\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2004-03-13 21:32-0500\n"
-"Last-Translator: Steve Langasek <vorlon@debian.org>\n"
-"Language-Team: Debian L10n Catalan <debian-l10n-catalan@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Joc de car<61>cters pel sistema de fitxers de Unix"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"El fitxer smb.conf actual t<> configurat un \"character set\".  En la versi<73> "
-"3.0 de Samba, aquesta opci<63> es reempla<6C>a per l'opci<63> \"unix charset\". "
-"Especifiqueu el joc de car<61>cters que voleu utilitzar per a aquesta nova "
-"opci<63> que controla el mode que el Samba interpreta els noms de fitxers del "
-"sistema de fitxers."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr "Si deixeu aquesta opci<63> en blanc no es modificar<61> el smb.conf."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Joc de car<61>cters pels clients DOS"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"El fitxer smb.conf actual t<> configurat un \"client code page\".  En la "
-"versi<73> 3.0 de Samba, aquesta opci<63> es reempla<6C>a per l'opci<63> \"dos charset\". "
-"L'opci<63> per defecte <20>s suficient en la majoria del casos. Recordeu que "
-"aquesta opci<63> no <20>s necess<73>ria pel suport dels clients de Windows, nom<6F>s <20>s "
-"pels clients de DOS. Si deixeu aquesta opci<63> en blanc no es canviar<61> el smb."
-"conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr ""
-"Voleu modificar el smb.conf perqu<71> utilitza els par<61>metres de configuraci<63> "
-"del WINS del DHCP?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"Si el vostre ordinador obt<62> la informaci<63> referent a la IP a trav<61>s d'un "
-"servidor de DHCP, aquest tamb<6D> li donar<61> informaci<63> sobre els servidors de "
-"WINS (\"servidors de nom de NetBIOS\") presents a la xarxa. Aquesta opci<63> "
-"precisa d'una modificaci<63> del fitxer smb.conf per tal que els par<61>metres de "
-"WINS obtinguts a trav<61>s del DHCP s'obtinguin a trav<61>s de la lectura de /etc/"
-"samba/dhcp.conf"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-"Per beneficiar-vos d'aquesta caracter<65>stica cal que tingueu instal<61>lat el "
-"paquet dhcp3-client."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "Voleu configurar el smb.conf a trav<61>s del debconf?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"La resta de la configuraci<63> del Samba tracta amb q<>estions que afecten els "
-"par<61>metres del fitxer de configuraci<63> els programes de Samba /etc/samba/smb."
-"conf. La versi<73> actual del smb.conf cont<6E> una l<>nia 'include' o una opci<63> "
-"que abarca m<>ltiples l<>nies que podria confondre al debconf i precisa de la "
-"seva edici<63> manual per poder-lo fer funcionar de nou."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"Si no utilitzeu el debconf per configurar el smb.conf, haureu de gestionar "
-"manualment qualsevol canvi de la configuraci<63>, i no us podreu beneficiar de "
-"les millores.  La seva utilitzaci<63> <20>s recomenable en cas que sigui possible."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Grup de treball/nom del domini?"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"Aquesta opci<63> defineix en quin grup de treball apareixer<65> el vostre servidor "
-"quan ho consultin els clients. Recordeu que aquest par<61>metre tamb<6D> controla "
-"el nom de domini utilitzat pel par<61>metre de configuraci<63> security=domain."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "Voleu utilitzar l'encriptaci<63> de contrasenyes?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"Els clients de Windows m<>s recents es comuniquen amb els servidors de Samba "
-"utilitzant contrasenyes encriptades. Si voleu utilitzar contrasenyes amb "
-"text pla, haureu de modificar el vostre registre de Windows. <20>s recomanable "
-"utilitzar contrasenyes encriptades. Si ho feu, assegureu-vos de tenir un "
-"fitxer /etc/samba/smbpasswd v<>lid i que hi especifiqueu la contrasenya de "
-"cada usuari utilitzant l'ordre smbpasswd."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr ""
-"Es crea la base de dades de contrasenyes de Samba, /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"El Samba s'ha de configurar perqu<71> utilitzi contrasenyes encriptades per tal "
-"que sigui compatible amb la majoria de versions de Windows per defecte. Aix<69> "
-"implica que les contrasenyes d'usuari s'emmagatzemin a un fitxer diferent "
-"del /etc/passwd. Aquest fitxer es pot crear autom<6F>ticament, per<65> les "
-"contrasenyes s'han d'afegir manualment (per v<>s o per l'usuari) executant "
-"l'ordre smbpasswd i cal que us organitzeu per tenir-lo actualitzat en un "
-"futur.  Si no el creeu, haureu de reconfigurar el Samba (i probablement els "
-"vostres ordinadors clients) per tal que utilitzin contrasenyes de text pla. "
-"Per m<>s informaci<63> feu una ullada a /usr/share/doc/samba-doc/htmldocs/"
-"ENCRYPTION.html del paquet samba-doc."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "S'han despla<6C>at els fitxers de registre de Samba."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"Els fitxers de registre dels dos dimonis de Samba (nmbd i smbd) es desen a /"
-"var/log/samba des de la primera versi<73> dels paquets de Samba 2.2 per Debian. "
-"Els noms dels fitxers s<>n, respectivament, log.nmbd i log.smbd."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-"Els fitxers de registre antics que estaven a /var/log/ es desplacen a la "
-"nova ubicaci<63>."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "L'execuci<63> del nmbd a trav<61>s del inetd ja no estar<61> suportada."
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"El vostre sistema estava pr<70>viament configurat perqu<71> inicies el nmbd i el "
-"smbd a trav<61>s del inetd. A partir de la versi<73> 2.999+3.0alpha20-4 el nmbd no "
-"es pot iniciar a trav<61>s del inetd.  Si heu modificat la seq<65><71>ncia "
-"d'arrencada /etc/init.d/samba, l'haureu de modificar manualment per tal que "
-"s'inici<63> com a dimoni."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "dimonis, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Com voleu executar el Samba?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"El dimoni de Samba pot executar-se com un dimoni normal o des del inetd. <20>s "
-"recomanable executar-lo com un dimoni."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "Es despla<6C>a etc/samba/smbpasswd a /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-"El Samba 3.0 introdueix una interf<72>cie de base de dades de SAM m<>s nova i "
-"completa que reempla<6C>a el fitxer /etc/samba/smbpassd.  Voleu que es migri el "
-"fitxer smbpasswd a /var/lib/samba/passdb.tdb?  Si la vostra intenci<63> <20>s "
-"utilitzar un altre pdb (ex, LDAP), haurieu de respondre 'no' aqu<71>."
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "El vostre smb.conf es reescriur<75>"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""
-"El SWAT reescriur<75> el vostre fitxer smb.conf. Reorganitzar<61> les entrades i "
-"suprimir<69> els comentaris i les opcions include= i copy=.  Si teniu un smb."
-"conf molt elaborat feu una c<>pia de seguretat o no utilitzeu el SWAT."

packaging/Debian/debian-sarge/po/cs.po

@@ -1,289 +0,0 @@
-#
-#    Translators, if you are not familiar with the PO format, gettext
-#    documentation is worth reading, especially sections dedicated to
-#    this format, e.g. by running:
-#         info -n '(gettext)PO Files'
-#         info -n '(gettext)Header Entry'
-#
-#    Some information specific to po-debconf are available at
-#            /usr/share/doc/po-debconf/README-trans
-#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-#
-#    Developers do not need to manually edit POT or PO files.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: samba\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2004-03-05 12:04+0100\n"
-"Last-Translator: Miroslav Kure <kurem@debian.cz>\n"
-"Language-Team: Czech <provoz@debian.cz>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-2\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Znakov<6F> sada pro unixov<6F> souborov<6F> syst<73>m"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"Moment<6E>ln<6C> m<>te ve sv<73>m smb.conf nastavenou volbu \"character set\". V Samb<6D> "
-"3.0 je tato volba nahrazena volbou \"unix charset\". Zadejte, pros<6F>m, "
-"znakovou sadu, kterou chcete pou<6F><75>t pro novou volbu. T<>mto nastav<61>te, jak m<> "
-"Samba interpretovat n<>zvy soubor<6F> v souborov<6F>m syst<73>mu."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr "Pokud nezad<61>te nic, v<><76> smb.conf se nezm<7A>n<EFBFBD>."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Znakov<6F> sada pro DOSov<6F> klienty."
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"Moment<6E>ln<6C> m<>te ve sv<73>m smb.conf nastavenou volbu \"client code page\". V "
-"Samb<6D> 3.0 je tato volba nahrazena volbou \"dos charset\". Zadejte, pros<6F>m, "
-"znakovou sadu, kterou chcete pou<6F><75>t pro novou volbu. Ve v<>t<EFBFBD>in<69> p<><70>pad<61> "
-"posta<74>uje implicitn<74> hodnota. Tato volba nen<65> pot<6F>ebn<62> pro Windowsov<6F> "
-"klienty, pouze pro DOSov<6F> klienty. Pokud nezad<61>te nic, v<><76> smb.conf se "
-"nezm<7A>n<EFBFBD>."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr "Upravit smb.conf, aby pou<6F><75>val WINS nastaven<65> z DHCP?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"Pokud v<><76> po<70><6F>ta<74> z<>sk<73>v<EFBFBD> IP adresu z DHCP serveru, m<><6D>ete v<>m tento server "
-"nab<61>zet tak<61> informace o WINS serverech (jmenn<6E>ch serverech NetBIOSu), kter<65> "
-"jsou dostupn<70> ve va<76><61> s<>ti. To vy<76>aduje z<>sah do souboru smb.conf, kde se "
-"nastav<61>, aby se informace o WINS serverech na<6E><61>taly ze souboru /etc/samba/"
-"dhcp.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-"Pro vyu<79>it<69> t<>to vlastnosti mus<75>te m<>t nainstalovan<61> bal<61>k dhcp3-client."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "Konfigurovat smb.conf p<>es debconf?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"Zbytek konfigurace Samby se zab<61>v<EFBFBD> ot<6F>zkami, kter<65> m<>n<EFBFBD> parametry v /etc/"
-"samba/smb.conf, co<63> je soubor pou<6F><75>van<61> pro nastaven<65> program<61> nmbd a smbd "
-"(dohromady tvo<76><6F> Sambu). V<><56> st<73>vaj<61>c<EFBFBD> smb.conf obsahuje <20><>dek 'include' "
-"nebo volbu, kter<65> se t<>hne p<>es v<>ce <20><>dk<64>, co<63> m<><6D>e zm<7A>st debconf a m<><6D>e "
-"zp<7A>sobit, <20>e pro znovuzprovozn<7A>n<EFBFBD> Samby budete muset upravit smb.conf ru<72>n<EFBFBD>."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"Pokud pro konfiguraci smb.conf nepou<6F><75>v<EFBFBD>te debconf, budete muset zvl<76>dnout "
-"v<>echna nastaven<65> sami a nebudete moci vyu<79><75>vat v<>hod pravideln<6C>ch vylep<65>en<65> "
-"tohoto souboru. Z tohoto pohledu je pou<6F>it<69> debconf doporu<72>en<65> volba."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Skupina/Dom<6F>nov<6F> jm<6A>no?"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"Zde m<><6D>ete zadat jm<6A>no skupiny, do kter<65> m<> server pat<61>it. T<>mto parametrem "
-"tak<61> nastav<61>te dom<6F>nov<6F> jm<6A>no pou<6F><75>van<61> s nastaven<65>m security=domain."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "Pou<6F><75>t <20>ifrov<6F>n<EFBFBD> hesel?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"Sou<6F>asn<73> windowsov<6F> klienti pou<6F><75>vaj<61> p<>i komunikaci se SMB servery "
-"za<7A>ifrovan<61> hesla. Pokud chcete pou<6F><75>t hesla neza<7A>ifrovan<61>, mus<75>te zm<7A>nit "
-"jeden parametr v registrech syst<73>mu Windows. Doporu<72>ujeme pou<6F><75>vat "
-"za<7A>ifrovan<61> hesla. Hesla m<><6D>ete jednotliv<69>m u<>ivatel<65>m p<>idat p<><70>kazem "
-"smbpasswd."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Vytvo<76>it datab<61>zi hesel /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"Pro dosa<73>en<65> co nejv<6A>t<EFBFBD><74> kompatibility s v<>t<EFBFBD>inou verz<72> syst<73>mu Windows mus<75> "
-"b<>t Samba nastavena, aby pou<6F><75>vala <20>ifrovan<61> hesla. To vy<76>aduje, aby byla "
-"hesla uchov<6F>na mimo souboru /etc/passwd. Po<50>adovan<61> soubor m<><6D>ete nechat "
-"vytvo<76>it automaticky, ale hesla do n<>j mus<75> b<>t p<>id<69>na ru<72>n<EFBFBD> programem "
-"smbpasswd (bu<62> v<>mi, nebo u<>ivatelem) a tak<61> jej mus<75>te udr<64>ovat "
-"aktualizovan<61>. Pokud jej nevytvo<76><6F>te, budete muset nastavit Sambu (a "
-"pravd<76>podobn<62> tak<61> klienty), aby pou<6F><75>vala ne<6E>ifrovan<61> hesla. Podrobnosti "
-"naleznete v /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html z bal<61>ku samba-"
-"doc."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "Logovac<61> soubory Samby se p<>esunuly."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"Od prvn<76>ch debian<61>ch bal<61><6C>k<EFBFBD> Samby verze 2.2 jsou logovac<61> soubory obou "
-"server<65> (nmbd a smbd) um<75>st<73>ny ve /var/log/samba/. N<>zvy p<><70>slu<6C>n<EFBFBD>ch soubor<6F> "
-"jsou log.nmbd a log.smbd."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-"Star<61> soubory z adres<65><73>e /var/log/ budou p<>esunuty na nov<6F> m<>sto automaticky."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "Spou<6F>t<EFBFBD>n<EFBFBD> nmbd z inetd ji<6A> nen<65> podporov<6F>no"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"V<><56> syst<73>m byl p<>vodn<64> nastaven, aby spou<6F>t<EFBFBD>l nmbd a smbd z inetd. Od verze "
-"2.999+3.0.alpha20-4 ji<6A> nelze nmbd spou<6F>t<EFBFBD>t z inetd. Pokud jste si upravili "
-"startovac<61> skript /etc/init.d/samba, mo<6D>n<EFBFBD> jej nyn<79> budete muset upravit pro "
-"korektn<74> start nmbd."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "d<>moni, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Jak chcete spou<6F>t<EFBFBD>t Sambu?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"Server Samby smbd m<><6D>e b<><62>et jako oby<62>ejn<6A> d<>mon (doporu<72>eno), nebo se m<><6D>e "
-"spou<6F>t<EFBFBD>t z inetd."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "P<>esunout /etc/samba/smbpasswd do /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-"Samba 3.0 zavedla nov<6F>, kompletn<74>j<EFBFBD><6A> rozhran<61> k SAM datab<61>zi, je<6A> p<>ekon<6F>v<EFBFBD> "
-"p<>vodn<64> soubor /etc/samba/smbpasswd. Chcete p<>ev<65>st st<73>vaj<61>c<EFBFBD> soubor "
-"smbpasswd na /var/lib/samba/passwd.tdb? Pokud pl<70>nujete pou<6F><75>t jinou pdb "
-"datab<61>zi (t<>eba LDAP), m<>li byste odpon<6F>d<EFBFBD>t 'ne'."
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "V<><56> smb.conf bude p<>eps<70>n!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""
-"SWAT p<>ep<65><70>e v<><76> soubor smb.conf. Mj. p<>eskl<6B>d<EFBFBD> polo<6C>ky a sma<6D>e v<>echny "
-"koment<6E><74>e a volby include= a copy=. Pokud m<>te pracn<63> odlad<61>n<EFBFBD> smb.conf, tak "
-"si jej zaz<61>lohujte, nebo nepou<6F><75>vejte SWAT!"

packaging/Debian/debian-sarge/po/da.po

@@ -1,290 +0,0 @@
-# translation of da.po to Danish
-# translation of samba Debian debconf template to Danish
-# Claus Hindsgaul <claus_h@image.dk>, 2004.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: da\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2004-02-15 17:23+0100\n"
-"Last-Translator: Claus Hindsgaul <claus_h@image.dk>\n"
-"Language-Team: Danish <dansk@klid.dk>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.0.2\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Tegnsæt til Unix-filsystemet"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"Du har en \"character set\"-indstilling i din smb.conf. I Samba 3.0 "
-"erstattes denne af en ny indstilling, \"unix charset\". Angiv det "
-"tegnsæt, du ønsker at bruge i denne nye indstilling, som styrer "
-"hvordan Samba tolker filnavne på systemet."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr "Hvis du ikke skriver noget her, vil din smb.conf ikke blive ændret."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Tegnsæt til DOS-klienter"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"Du har en \"client code page\"-indstilling i din smb.conf. I Samba "
-"3.0 erstattes denne af en ny indstilling, \"dos charset\". Angiv det "
-"tegnsæt, du ønsker at bruge i denne nye indstilling. I de fleste tilfælde "
-"vil det forvalgte være nok. Bemærk at denne indstilling ikke kræves "
-"for at understøtte Windows-klienter; den gælder kun DOS-klienter. Hvis "
-"du ikke skriver noget her, vil smb.conf ikke blive ændret."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr "Ret smb.conf, så den benytter WINS-indstillinger fra DHCP?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"Hvis din computer får IP-adresseoplysninger fra en DHCP-server på "
-"netværket, kan DHCP-serveren også give oplysninger om WINS-servere "
-"(\"NetBIOS navneservere\") på netværket. Dette kræver en ændring i din "
-"smb.conf-fil, så WINS-indstillingerne fra DHCP-serveren automatisk "
-"indlæses fra /etc/samba/dhcp.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-"Ud skal have pakken dhcp3-client installeret for at kunne udnytte denne "
-"funktion."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "Sæt smb.conf op med debconf?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"Resten af Samba-opsætningen drejer sig om spørgsmål om indstillingerne "
-"i filen /etc/samba/smb.conf, som benyttes til at sætte Samba-programmerne "
-"(nmbd og smbd) op. Din nuværende smb.conf indeholder en 'include'-linje "
-"eller en indstilling, der fylder flere linjer, hvilket kan forvirre "
-"debconf og kræve at du redigerer din smb.conf selv for at få Samba til "
-"at fungere igen."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"Hvis du ikke bruger debconf til at sætte smb.conf op, må du selv håndtere "
-"ændringer i opsætningen, og vil ikke kunne drage nytte af de løbende "
-"forbedringer i opsætningen. Derfor anbefales brugen af debconf, hvis "
-"det er muligt."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Navn på arbejdsgruppe/domæne?"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"Dette styrer hvilken arbejdsgruppe din server til tilhøre, når den bliver "
-"spurgt af klienter. Bemærk at dette også styrer det domænenavn, der bruges "
-"med indstillingen \"security=domain\"."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "Kryptér adgangskoder?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"Nyere Windows-klienter kommunikerer med SMB-servere med krypterede "
-"adgangskoder. Hvis du vil bruge adgangkoder i klar tekst, bliver du "
-"nødt til at ændre en indstilling i Windows' registreringsdatabase. Det "
-"anbefales at du bruger krypterede adgangskoder. Hvis du gør, så sørg for "
-"at du har en gyldig /etc/samba/smbpasswd-fil og at du her angiver "
-"adgangskoder for hver bruger med kommandoen smbpasswd."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Opret samba-adgangskodedatabasen /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"For at være kompatibel med standardindstillingerne i de fleste udgaver af "
-"Windows, skal Samba være sat op til at benytte krypterede adgangskoder. "
-"Det kræver at brugernes adgangskoder gemmes i en anden fil end /etc/passwd. "
-"Denne fil kan oprettes automatisk, men adgangskoderne er nødt til at blive "
-"tilføjet manuelt (af dig eller af brugeren) ved at køre smbpasswd, og du "
-"skal holde den opdateret i fremtiden. Hvis du ikke opretter den, er du nødt "
-"til at sætte samba (og sikkert også dine klientmaskiner) op til at benytte "
-"adgangskoder i klar tekst. Se /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html "
-"i pakken samba-doc for flere detaljer."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "Sambas logfiler er flyttet."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"Fra og med de første Samba 2.2-Debianpakker, bliver begge Samba-dæmonernes "
-"(nmbd og smbd) logfiler gemt i /var/log/samba/. Filernes navne er log.nmbd "
-"og log.smbd."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-"De gamle logfiler, der var i /var/log vil blive flyttet til den nye placering "
-"for dig."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "Kørsel af nmbd fra inetd understøttes ikke længere."
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"Dit system var tidligere sat op til at starte nmbd og smbd fra inetd. "
-"Fra og med version 2.999+3.0.alpha20-4 kan nmbd ikke længere startes med inetd. "
-"Hvis du har rettet din opstartsskript /etc/init.d/samba, kan du være nødt "
-"til at justere det manuelt nu, så nmbd bliver startet."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "dæmoner, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Hvordan skal Samba køres?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"Samba-dæmonen smbd kan køre som en almindelig dæmon eller fra inetd. Det "
-"anbefales at køre den som dæmon."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "Flyt /etc/samba/smbpasswd til /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-"Samba 3.0 har en nyere og mere komplet SAM-databasegrænseflade, som "
-"erstatter filen /etc/samba/smbpasswd. Vil du have din eksisterende "
-"smbpasswd-fil overført til /var/lib/samba/passdb.tdb?`Hvis du i stedet "
-"planlægger at bruge en anden pdb-håndtering (f.eks. LDAP), bør du afvise "
-"dette."
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "Din smb.conf vil blive omskrevet!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""
-"SWAT vil overskrive din smb.conf-fil. Den vil flytte rundt på linjerne "
-"og slette alle kommentarer, og linjer med \"include=\" og \"copy=\". "
-"Hvis du har brugt tid på at lave din egen smb.conf, så tag en "
-"sikkerhedskopi eller undlad at benytte SWAT!"
-

packaging/Debian/debian-sarge/po/es.po

@@ -1,298 +0,0 @@
-#
-#    Translators, if you are not familiar with the PO format, gettext
-#    documentation is worth reading, especially sections dedicated to
-#    this format, e.g. by running:
-#         info -n '(gettext)PO Files'
-#         info -n '(gettext)Header Entry'
-#
-#    Some information specific to po-debconf are available at
-#            /usr/share/doc/po-debconf/README-trans
-#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-#
-#    Developers do not need to manually edit POT or PO files.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Samba for Debian 3.0.0beta2-1\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2003-07-02 21:51-0500\n"
-"Last-Translator: Steve Langasek <vorlon@debian.org>\n"
-"Language-Team: Spanish <debian-l10n-spanish@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Juego de caracteres para el sistema de ficheros Unix"
-
-#
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"Actualmente hay una opción de \"character set\" en smb.conf.  En Samba 3.0 "
-"esta opción ha sido reemplazado por una opción nueva: \"unix charset\". Por "
-"favor, indique el juego de caracteres que desea usar para esta opción nueva, "
-"que controla cómo Samba interpretará los nombres en el sistema de ficheros."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr "Si deja en blanco este campo, no se cambiará smb.conf."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Juego de caracteres para los clientes DOS"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"Actualmente hay una opción de \"client code page\" en smb.conf.  En Samba "
-"3.0 esta opción ha sido reemplazado por la opción \"dos charset\".  Por "
-"favor, indique el juego de caracteres que desea usar para esta opción "
-"nueva.  Esta opción no se necesita en absoluto para clientes Windows; es "
-"exclusivamente para los clientes DOS.  Si deja en blanco este campo, no se "
-"cambiará smb.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr ""
-"¿Modificar smb.conf para usar la configuración WINS que proviene de DHCP?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"Si su sistema recibe la dirección IP desde un servidor DHCP en la red, el "
-"servidor DHCP también puede proveerle informaciones sobre los servidores de "
-"WINS que haya en la red.  Esto requiere un cambio en el fichero smb.conf "
-"para que la configuración de WINS proveniente de DHCP se lea automaticamente "
-"de /etc/samba/dhcp.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-"Hay que instalar el paquete dhcp3-client para aprovechar esta funcionalidad."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "¿Configurar smb.conf mediante debconf?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"El resto de la configuración de Samba trata sobre cuestiones que afectan al "
-"contenido de /etc/samba/smb.conf, que es el fichero utilizado para "
-"configurar los programas de Samba (nmbd y smbd). Su smb.conf actual contiene "
-"una línea 'include' o una opción que atraviesa más de una línea, así que "
-"debconf puede dejarlo con un smb.conf descompuesto, requiriendo que lo "
-"arregle a mano."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"Si no usa debconf para configurar smb.conf, tendrá que cuidar a mano "
-"cualquier cambio a la configuración de Samba y no disfrutará de aumentos "
-"periódicos de configuración.  Por eso se recomienda el uso de debconf cuando "
-"sea posible."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Nombre del dominio o del grupo de trabajo"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"Es el grupo de trabajo en el que aparecerá su servidor cuando se lo "
-"pregunten los clientes de la red. Este parámetro también controla el nombre "
-"de dominio que se usa con la configuración security=domain."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "¿Utilizar contraseñas cifradas?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"Los clientes Windows más modernos se comunican con los servidores SMB "
-"utilizando contraseñas cifradas. Si quiere usar contraseñas en texto plano, "
-"tendrá que cambiar un parámetro en el registro de Windows. Es muy "
-"recomendable usar cifrado en las contraseñas. Si elige hacerlo, compruebe "
-"que tiene un fichero /etc/samba/smbpasswd válido y que ha puesto las "
-"contraseñas con el programa smbpasswd."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "¿Crear el base de dados de contraseñas /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"Para manterner la compatibilidad con el comportamiento por defecto de la "
-"mayoria de los sistemas Windows, hay que configurar Samba para que use "
-"contraseñas cifradas, lo cual requiere la creación de un fichero, distinto "
-"del /etc/passwd, donde se guarden las contraseñas de los usuarios. El "
-"fichero se puede crear automaticamente, aunque es necesario añadir las "
-"contraseñas manualmente (por usted o por el usuario) mediante el programa "
-"'smbpasswd', y debe encargarse de mantener las contraseñas al día.  Si no "
-"crea este fichero, es imprescindible configurar Samba (y posiblemente los "
-"sistemas Windows) para que use contraseñas no cifradas.  Véa /usr/share/doc/"
-"samba-doc/htmldocs/ENCRYPTION.html del paquete samba-doc para más "
-"información."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "Se han cambiado de lugar los ficheros de registro de Samba."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"A partir de los primeros paquetes Debian de Samba 2.2, los ficheros de "
-"registro de los dos demonios del Samba (nmbd y smbd) se encuentran en /var/"
-"log/samba/.  Los nombres de estos ficheros son log.nmbd y log.smbd, para "
-"nmbd y smbd respectivamente."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-"Los ficheros de registro antiguos que había en /var/log se moverán "
-"automáticamente a su nueva ubicación."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "Ya no se puede ejecutar nmbd desde el inetd"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"Su sistema estaba configurado anteriormente para ejectuar nmbd y smbd desde "
-"inetd.  A partir de la version 2.999+3.0.alpha20-4, nmbd ya no se ejecuta "
-"desde inetd.  Si ha modificado el script de arranque /etc/init.d/samba, "
-"puede que tenga que editarlo ahora para que nmbd se ejecute."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "demonios, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "¿Cómo quiere que se ejecute Samba?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"El servicio Samba smbd puede ejecutarse como demonio normal o desde el "
-"inetd.  Se recomienda que se ejecute como demonio independiente."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr ""
-"¿Convertir el fichero /etc/samba/smbpasswd en /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:45
-#, fuzzy
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-"La versión 3.0 de Samba introduce un nuevo base de dados \"SAM\" más "
-"completo que suplanta al fichero /etc/samba/smbpasswd.  ¿Quiere que el "
-"fichero corriente smbpasswd sea convertido en /var/lib/samba/passdb.tdb?  Si "
-"pretende usar otro  "
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "¡Se sobrescribirá su configuración smb.conf!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""

packaging/Debian/debian-sarge/po/fr.po

@@ -1,301 +0,0 @@
-#
-#    Translators, if you are not familiar with the PO format, gettext
-#    documentation is worth reading, especially sections dedicated to
-#    this format, e.g. by running:
-#         info -n '(gettext)PO Files'
-#         info -n '(gettext)Header Entry'
-#
-#    Some information specific to po-debconf are available at
-#            /usr/share/doc/po-debconf/README-trans
-#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-#
-#    Developers do not need to manually edit POT or PO files.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: Samba for Debian 3.0.0beta2-1\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2003-07-02 21:52-0500\n"
-"Last-Translator: Steve Langasek <vorlon@debian.org>\n"
-"Language-Team: French <debian-l10n-french@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-15\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Jeu de caract<63>res pour les syst<73>mes de fichiers Unix"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"Une instruction <20><>character set<65><74> (jeu de caract<63>res) est utilis<69>e dans "
-"votre fichier smb.conf. Avec Samba 3.0, cette option est remplac<61>e par une "
-"nouvelle option, <20><>unix charset<65><74> (jeu de caract<63>res Unix).  Veuillez "
-"indiquer le jeu de caract<63>res que vous voulez utiliser avec cette option, "
-"qui permet d'interpr<70>ter les noms de fichiers sur le syst<73>me."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr ""
-"Le fichier smb.conf ne sera pas modifi<66> si vous laissez cette option sans "
-"r<>ponse."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Jeu de caract<63>res pour les clients DOS"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"Votre fichier smb.conf contient une option <20><>client code page<67><65> (page de "
-"codes du client). Avec Samba 3.0, cette option a <20>t<EFBFBD> remplac<61>e par l'option "
-"<22><>dos charset<65><74> (jeu de caract<63>res DOS). Veuillez indiquer le jeu de "
-"caract<63>res que vous voulez utiliser avec la nouvelle option. En g<>n<EFBFBD>ral le "
-"jeu de caract<63>res choisi par d<>faut est suffisant. Veuillez noter que cette "
-"option ne sert pas pour les clients Windows mais seulement pour les clients "
-"DOS. Le fichier smb.conf ne sera pas modifi<66> si vous laissez cette option "
-"sans r<>ponse. "
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr "Modifier smb.conf pour utiliser les param<61>tres WINS fournis par DHCP<43>?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"Si votre ordinateur obtient ses param<61>tres IP <20> partir d'un serveur DHCP du "
-"r<>seau, ce serveur peut aussi fournir des informations sur les serveurs WINS "
-"(serveurs de noms NetBIOS) pr<70>sents sur le r<>seau. Une modification du "
-"fichier smb.conf est n<>cessaire afin que les r<>glages WINS fournis par le "
-"serveur DHCP soient lus dans /etc/samba/dhcp.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr "Pour cela, le paquet dhcp3-client doit <20>tre install<6C>."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "Voulez-vous configurer smb.conf avec debconf<6E>?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"La suite de la configuration de Samba pose des questions sur des param<61>tres "
-"de /etc/samba/smb.conf, le fichier utilis<69> pour configurer les programmes de "
-"Samba (nmbd et smbd). Votre fichier actuel contient une ligne <20><>include<64><65> ou "
-"une option qui s'<27>tale sur plusieurs lignes<65>: cela peut perturber debconf et "
-"il vaut mieux g<>rer manuellement le contenu de ce fichier."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"Si vous n'utilisez pas debconf pour configurer smb.conf, vous devrez vous-"
-"m<>me g<>rer les modifications de configuration et vous ne pourrez pas "
-"b<>n<EFBFBD>ficier des am<61>liorations faites dans la configuration. Si possible, il "
-"est conseill<6C> d'utiliser debconf."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Groupe de travail et nom de domaine<6E>?"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"Ce param<61>tre indique le groupe de travail o<> les clients trouveront le "
-"serveur. Il indique aussi le nom de domaine utilis<69> par le param<61>tre "
-"<22><>security=domain<69><6E>."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "Voulez-vous chiffrer les mots de passe<73>?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"Des clients Windows r<>cents communiquent avec les serveurs SMB en utilisant "
-"des mots de passe chiffr<66>s. Si vous voulez utiliser des mots de passe sans "
-"chiffrement, vous devez modifier un param<61>tre dans le registre de Windows. "
-"Il est recommand<6E> d'utiliser des mots de passe chiffr<66>s. Si vous le faites, "
-"n'oubliez pas de cr<63>er un fichier /etc/samba/smbpasswd et d'y mettre les "
-"mots de passe de tous les utilisateurs qui se servent de la commande "
-"smbpasswd."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Faut-il cr<63>er une base de donn<6E>es /var/lib/samba/passdb.tdb<64>?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"Pour pr<70>server la compatibilit<69> avec le comportement par d<>faut de la "
-"plupart des syst<73>mes Windows, Samba doit utiliser les mots de passe "
-"chiffr<66>s. Cela exige la cr<63>ation d'un fichier, distinct du fichier /etc/"
-"passwd, pour mettre les mots de passe des utilisateurs. Ce fichier peut <20>tre "
-"cr<63><72> automatiquement, mais quelqu'un (vous ou l'utilisateur) devra ajouter "
-"les mots de passe manuellement en utilisant la commande smbpasswd<77>; et vous "
-"devrez maintenir <20> jour ce fichier. Si vous ne voulez pas cr<63>er le fichier "
-"maintenant, Samba (et peut-<2D>tre les ordinateurs Windows) devra utiliser des "
-"mots de passe non chiffr<66>s. Voyez /usr/share/doc/samba-doc/htmldocs/"
-"ENCRYPTION.html dans le paquet samba-doc pour plus de d<>tails."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "Les fichiers-journaux de Samba ont chang<6E> de place."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"<22> partir des premiers paquets de Samba 2.2 pour Debian, les fichiers-"
-"journaux des d<>mons nmbd et smbd se trouvent dans /var/log/samba/. Les noms "
-"de ces fichiers sont log.nmbd et log.smbd pour, respectivement, nmbd et smbd."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-"Les anciens fichiers-journaux dans /var/log/ seront mis au bon endroit."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "L'utilisation de nmbd <20> partir d'inetd n'est plus support<72>e"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"Votre syst<73>me lan<61>ait nmbd et smbd <20> partir d'inetd. Depuis la version 2.999"
-"+3.0.alpha20-4, on ne peut plus ex<65>cuter nmbd <20> partir d'inetd. Si vous avez "
-"modifi<66> le script de lancement /etc/init.d/samba, vous avez peut-<2D>tre besoin "
-"de le corriger manuellement pour permettre le lancement de nmbd. "
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "d<>mons, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Comment voulez-vous lancer Samba<62>?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"Le service de Samba smbd peut s'ex<65>cuter en tant que d<>mon classique ou bien "
-"<22>tre lanc<6E> par inetd. L'approche recommand<6E>e est qu'il s'ex<65>cute en tant que "
-"d<>mon."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "Faut-il convertir /etc/samba/smbpasswd en /var/lib/samba/passdb.tdb<64>?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-"Avec Samba 3.0, une nouvelle interface pour les bases de donn<6E>es SAM, plus "
-"compl<70>te, vient remplacer le fichier /etc/samba/smbpasswd. Voulez-vous que "
-"votre fichier existant soit remplac<61> par /var/lib/samba/passdb.tdb<64>? Si vous "
-"envisagez d'utiliser une autre interface d'authentification (p.ex. LDAP), "
-"refusez la proposition maintenant."
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "R<>-<2D>criture de votre fichier smb.conf<6E>!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""
-"SWAT va modifier votre fichier smb.conf. Les entr<74>es seront r<>organis<69>es et "
-"les commentaires d<>truits ainsi que les entr<74>es <20><>include =<3D><> et <20><>copy =<3D><>. "
-"Si votre smb.conf <20>tait soigneusement construit, sauvegardez-le ou "
-"n'utilisez pas SWAT<41>!"

packaging/Debian/debian-sarge/po/it.po

@@ -1,287 +0,0 @@
-# samba po-debconf translation to italian
-# Copyright (C) 2004 Software in the Public Interest
-# This file is distributed under the same license as the samba package.
-# Luca Monducci, 2004.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: samba 3.0.7 debconf templates\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2004-12-03 21:10+0100\n"
-"Last-Translator: Luca Monducci <luca.mo@tiscali.it>\n"
-"Language-Team: Italian <debian-l10n-italian@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Set di caratteri per il filesystem Unix"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"Attualmente in smb.conf è configurato il «character set», in Samba 3.0, "
-"questa opzione è sostituita da una nuova opzione «unix character». "
-"Specificare il set di caratteri che si desidera usare per questa opzione "
-"che controlla come Samba interpreta i nomi dei file sul file system."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr "Lasciando vuoto questo valore smb.conf non verrà modificato."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Set di caratteri per i client DOS"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"Attualmente in smb.conf è configurato il «client code page», in Samba 3.0, "
-"questa opzione è sostituita dall'opzione «dos character». Specificare il "
-"set di caratteri che si desidera usare per questa opzione. In molti casi "
-"il valore predefinito è sufficiente. Notare che questa opzione non è "
-"necessaria per i client Windows, invece è specifica per i client DOS. "
-"Lasciando vuoto questo valore smb.conf non verrà modificato."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr "Modificare smb.conf per usare le impostazioni WINS da DHCP?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"Se il computer prende le informazioni sull'indirizzo IP da un server DHCP "
-"allora il server DHCP può fornire anche informazioni sui server WINS (i "
-"name server per NetBIOS) presenti nella rete. Questo necessita una modifica "
-"al file smb.conf in modo le impostazioni di WINS fornite dal DHCP siano "
-"lette automaticamente da /etc/samba/dhcp.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-"Deve essere installato il pacchetto dhcp3-client per usare questa "
-"funzionalità."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "Configurare smb.conf usando debconf?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"Il resto della configurazione di Samba fa delle domande sui parametri di "
-"/etc/samba/smb.conf, il file usato per configurare i programmi di Samba "
-"(nmbd e smbd). L'attuale file smb.conf contiene una riga «include» o una "
-"opzione che si estende su più righe: questo potrebbe confondere debconf "
-"e richiedere una modifica manuale a smb.conf per renderlo nuovamente "
-"funzionante."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"Se non si vuole usare usare debconf per configurare smb.conf si dovranno "
-"gestire tutti i cambiamenti della configurazione da soli e non sarà "
-"possibile beneficiare dei miglioramenti periodici della configurazione; "
-"se possibile, si consiglia l'uso di debconf."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Nome del Workgroup/Dominio"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"Questo imposta in quale workgroup apparirà il server quando i client "
-"tenteranno l'accesso. Notare che questo parametro controlla anche il nome "
-"del Dominio usato del parametro «security=domain»."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "Usare password cifrate?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"I client Windows recenti comunicano con i server SMB usando password "
-"cifrate. Per usare password in chiaro è necessario cambiare un parametro "
-"nel registro di Windows. Si raccomanda l'uso di password cifrate. In caso "
-"contrario assicurarsi che il file /etc/samba/smbpasswd sia valido e usare "
-"il comando smbpasswd per inserirci le password di ciascun utente."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Creare il database delle password samba /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"Per essere compatibile con le impostazioni predefinite di molte versioni "
-"di Windows, Samba deve essere configurato per usare password cifrate. "
-"Questo richiede che le password degli utenti siano memorizzate in un file "
-"diverso da /etc/passwd. Questo file può essere creato automaticamente ma "
-"qualcuno (l'amministratore o l'utente) dovrà inserire manualmente e poi "
-"tenere aggiornate le password usando smbpasswd. Se non si crea questo file "
-"sarà necessario riconfigurare samba (e probabilmente anche le macchine "
-"client) per usare password in chiaro. Vedere /usr/share/doc/samba-doc/"
-"htmldocs/ENCRYPTION.html contenuto nel pacchetto samba-doc per ulteriori "
-"dettagli."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "I file di log di Samba sono stati spostati."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"A partire dai primi pacchetti Samba 2.2 per Debian i file di log per "
-"entrambi i demoni Samba (nmbd e smbd) sono memorizzati in /var/log/samba/. "
-"I nomi dei file di log sono log.nmbd e log.smbd rispettivamente per nmbd e "
-"smbd."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-"I vecchi file di log in /var/log/ verranno spostati nella nuova directory."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "L'avvio di nmbd da inetd non è più supportato"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"Il sistema è configurato per avviare nmbd e smbd da inetd. Dalla versione "
-"2.999+3.0.alpha20-4 non è più possibile avviare nmbd da inetd. Se si è "
-"modificato lo script di avvio /etc/init.d/samba potrebbe essere necessario "
-"correggerlo a mano in modo da permettere l'avvio di nmbd."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "demoni, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Come avviare Samba?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"Il demone Samba smbd può essere avviato come un normale demone oppure da "
-"inetd. Si raccomanda l'avvio come demone."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "Spostare /etc/samba/smbpasswd in /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-"Samba 3.0 introduce una nuova e più completa interfaccia al database SAM che "
-"sostituisce il file /etc/samba/smbpasswd. Si vuole che il file smbpasswd sia "
-"migrato a /var/lib/samba/passdb.tdb? Se si pensa di usare un backend pdb "
-"diverso (p.e. LDAP), si dovrebbe rispondere «no»."
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "Sovrascrittura di smb.conf!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""
-"SWAT sovrascriverà il file smb.conf, verranno riordinate le impostazioni e "
-"verranno cancellati tutti i commenti, le opzioni include= e copy=. Se si è "
-"personalizzato smb.conf tornare indietro e non usare SWAT."

packaging/Debian/debian-sarge/po/ja.po

@@ -1,292 +0,0 @@
-#
-#    Translators, if you are not familiar with the PO format, gettext
-#    documentation is worth reading, especially sections dedicated to
-#    this format, e.g. by running:
-#         info -n '(gettext)PO Files'
-#         info -n '(gettext)Header Entry'
-#
-#    Some information specific to po-debconf are available at
-#            /usr/share/doc/po-debconf/README-trans
-#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-#
-#    Developers do not need to manually edit POT or PO files.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2003-09-09 09:26+0900\n"
-"Last-Translator: Kenshi Muto <kmuto@debian.org>\n"
-"Language-Team: Japanese <debian-japanese@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=EUC-JP\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Unix <20>ե<EFBFBD><D5A5><EFBFBD><EFBFBD>륷<EFBFBD><EBA5B7><EFBFBD>ƥ<EFBFBD><C6A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʸ<EFBFBD><CAB8><EFBFBD><EFBFBD><EFBFBD>å<EFBFBD>"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"<22><><EFBFBD>ߡ<EFBFBD>smb.conf <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ѥߤ<D1A4> \"character set\" <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>Samba 3.0 <20>Ǥϡ<C7A4><CFA1><EFBFBD>"
-"<22>Υ<EFBFBD><CEA5>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ͽ<EFBFBD><CFBF><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD> \"unix charset\" <20><><EFBFBD>֤<EFBFBD><D6A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƥ<EFBFBD><C6A4>ޤ<EFBFBD><DEA4><EFBFBD>"
-"Samba <20><><EFBFBD>ե<EFBFBD><D5A5><EFBFBD><EFBFBD>륷<EFBFBD><EBA5B7><EFBFBD>ƥ<EFBFBD><C6A5>Υե<CEA5><D5A5><EFBFBD><EFBFBD><EFBFBD>̾<EFBFBD><CCBE><EFBFBD>ɤΤ褦<CEA4>˲<EFBFBD><CBB2>᤹<EFBFBD>뤫<EFBFBD><EBA4AB><EFBFBD><EFBFBD><EFBFBD>椹<EFBFBD>뤳<EFBFBD>ο<EFBFBD><CEBF><EFBFBD>"
-"<22><><EFBFBD><EFBFBD><EFBFBD>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Τ<EFBFBD><CEA4><EFBFBD><EFBFBD>ˡ<EFBFBD><CBA1><EFBFBD>˾<EFBFBD><CBBE><EFBFBD><EFBFBD>ʸ<EFBFBD><CAB8><EFBFBD><EFBFBD><EFBFBD>åȤ<C3A5><C8A4><EFBFBD><EFBFBD>ꤷ<EFBFBD>Ƥ<EFBFBD><C6A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr "<22><><EFBFBD>Υ<EFBFBD><CEA5>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Τޤޤˤ<DEA4><CBA4><EFBFBD><EFBFBD>ȡ<EFBFBD>smb.conf <20><><EFBFBD>ѹ<EFBFBD><D1B9><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD>"
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "DOS <20><><EFBFBD>饤<EFBFBD><E9A5A4><EFBFBD><EFBFBD><EFBFBD>ȸ<EFBFBD><C8B8><EFBFBD><EFBFBD><EFBFBD>ʸ<EFBFBD><CAB8><EFBFBD><EFBFBD><EFBFBD>å<EFBFBD>"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"<22><><EFBFBD>ߡ<EFBFBD>smb.conf <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ѥߤ<D1A4> \"client code page\" <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>Samba 3.0 <20>Ǥϡ<C7A4>"
-"<22><><EFBFBD>Υ<EFBFBD><CEA5>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ͽ<EFBFBD><CFBF><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD> \"dos charset\" <20><><EFBFBD>֤<EFBFBD><D6A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƥ<EFBFBD><C6A4>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
-"<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Τ<EFBFBD><CEA4><EFBFBD><EFBFBD>ˡ<EFBFBD><CBA1><EFBFBD>˾<EFBFBD><CBBE><EFBFBD><EFBFBD>ʸ<EFBFBD><CAB8><EFBFBD><EFBFBD><EFBFBD>åȤ<C3A5><C8A4><EFBFBD><EFBFBD>ꤷ<EFBFBD>Ƥ<EFBFBD><C6A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ۤȤ<DBA4><C8A4>ɤξ<C9A4>"
-"<22>硢<EFBFBD>ǥե<C7A5><D5A5><EFBFBD><EFBFBD>Ȥ<EFBFBD><C8A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Τޤޤǽ<DEA4>ʬ<EFBFBD>Ǥ<EFBFBD><C7A4>礦<EFBFBD><E7A4A6><EFBFBD><EFBFBD><EFBFBD>Υ<EFBFBD><CEA5>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> Windows <20><><EFBFBD>饤<EFBFBD><E9A5A4><EFBFBD><EFBFBD>"
-"<22>ȥ<EFBFBD><C8A5>ݡ<EFBFBD><DDA1>Ȥˤ<C8A4>ɬ<EFBFBD>פʤ<D7A4><CAA4><EFBFBD>DOS <20><><EFBFBD>饤<EFBFBD><E9A5A4><EFBFBD><EFBFBD><EFBFBD>ȤΤߤΤ<DFA4><CEA4><EFBFBD><EFBFBD>Ǥ<EFBFBD><C7A4>뤳<EFBFBD>Ȥ<EFBFBD><C8A4><EFBFBD><EFBFBD>դ<EFBFBD><D5A4>Ƥ<EFBFBD><C6A4><EFBFBD><EFBFBD><EFBFBD>"
-"<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Υ<EFBFBD><CEA5>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Τޤޤˤ<DEA4><CBA4><EFBFBD><EFBFBD>ȡ<EFBFBD>smb.conf <20><><EFBFBD>ѹ<EFBFBD><D1B9><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD>"
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr "DHCP <20><><EFBFBD><EFBFBD> WINS <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȥ<EFBFBD><C8A4>褦 smb.conf <20><><EFBFBD>ѹ<EFBFBD><D1B9><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"<22><><EFBFBD>ʤ<EFBFBD><CAA4>Υ<EFBFBD><CEA5><EFBFBD><EFBFBD>ԥ塼<D4A5><E5A1BC><EFBFBD><EFBFBD><EFBFBD>ͥåȥ<C8A5><EFA1BC><EFBFBD><EFBFBD><EFBFBD><EFBFBD> DHCP <20><><EFBFBD><EFBFBD><EFBFBD>Ф<EFBFBD><D0A4><EFBFBD> IP <20><><EFBFBD>ɥ쥹<C9A5><ECA5B9><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
-"<22><><EFBFBD>Ƥ<EFBFBD><C6A4><EFBFBD><EFBFBD>ΤǤ<CEA4><C7A4><EFBFBD><EFBFBD>С<EFBFBD>DHCP <20><><EFBFBD><EFBFBD><EFBFBD>Фϥͥåȥ<C8A5><EFA1BC><EFBFBD><EFBFBD><EFBFBD>ˤ<EFBFBD><CBA4><EFBFBD> WINS <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> (NetBIOS "
-"<22>͡<EFBFBD><CDA1>ॵ<EFBFBD><E0A5B5><EFBFBD><EFBFBD>) <20>ˤĤ<CBA4><C4A4>Ƥξ<C6A4><CEBE><EFBFBD><EFBFBD><EFBFBD><EFBFBD>󶡤<EFBFBD><F3B6A1A4>뤳<EFBFBD>Ȥ<EFBFBD><C8A4>Ǥ<EFBFBD><C7A4>ޤ<EFBFBD><DEA4><EFBFBD>DHCP <20><><EFBFBD>󶡤<EFBFBD><F3B6A1A4><EFBFBD><EFBFBD><EFBFBD> WINS "
-"<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> /etc/samba/dhcp.conf <20><><EFBFBD>鼫ưŪ<C6B0><C5AA><EFBFBD>ɤ߹<C9A4><DFB9>ޤ<EFBFBD><DEA4>뤿<EFBFBD>ᡢsmb.conf <20>ե<EFBFBD><D5A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
-"<22>ѹ<EFBFBD><D1B9><EFBFBD><EFBFBD><EFBFBD>ɬ<EFBFBD>פ<EFBFBD><D7A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-"<22><><EFBFBD>ε<EFBFBD>ǽ<EFBFBD><C7BD><EFBFBD>Ȥ<EFBFBD><C8A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ˤϡ<CBA4>dhcp3-client <20>ѥå<D1A5><C3A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>󥹥ȡ<F3A5B9A5><C8A1>뤵<EFBFBD><EBA4B5><EFBFBD>Ƥ<EFBFBD><C6A4><EFBFBD>ɬ<EFBFBD>פ<EFBFBD>"
-"<22><><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>"
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "debconf <20><><EFBFBD>̤<EFBFBD><CCA4><EFBFBD> smb.conf <20><><EFBFBD><EFBFBD><EFBFBD>ꤷ<EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"Samba <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>λĤ<CEBB><C4A4><EFBFBD><EFBFBD><EFBFBD>ʬ<EFBFBD>ϡ<EFBFBD>Samba <20>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> (nmbd <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> smbd) <20><><EFBFBD><EFBFBD><EFBFBD>ꤹ<EFBFBD><EAA4B9><EFBFBD><EFBFBD>"
-"<22>˻Ȥ<CBBB><C8A4>ե<EFBFBD><D5A5><EFBFBD><EFBFBD><EFBFBD> /etc/samba/smb.conf <20>ˤ<EFBFBD><CBA4><EFBFBD><EFBFBD>ѥ<EFBFBD><D1A5>᡼<EFBFBD><E1A1BC><EFBFBD>˱ƶ<CBB1><C6B6><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ǥ<EFBFBD><C7A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
-"<22><> smb.conf <20>ϡ<EFBFBD>'include' <20>Ԥޤ<D4A4><DEA4><EFBFBD>ʣ<EFBFBD><CAA3><EFBFBD>Ԥˤޤ<CBA4><DEA4><EFBFBD><EFBFBD>륪<EFBFBD>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4>Ǥ<EFBFBD><C7A4>ޤ<EFBFBD><DEA4><EFBFBD>"
-"<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> debconf <20><><EFBFBD><EFBFBD><EFBFBD>𤵤<EFBFBD><F0A4B5A4><EFBFBD><EFBFBD><EFBFBD>ǽ<EFBFBD><C7BD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꡢ<EFBFBD>Ƥ<EFBFBD> debconf <20><><EFBFBD><EFBFBD>ư<EFBFBD><C6B0><EFBFBD><EFBFBD><EFBFBD>褦<EFBFBD>ˤ<EFBFBD><CBA4>٤<EFBFBD> "
-"smb.conf <20>μ<EFBFBD>ư<EFBFBD>Ǥν<C7A4><CEBD><EFBFBD><EFBFBD><EFBFBD>ɬ<EFBFBD>פȤ<D7A4><C8A4>ޤ<EFBFBD><DEA4><EFBFBD>"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"smb.conf <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> debconf <20><><EFBFBD>Ȥ<EFBFBD><C8A4>ʤ<EFBFBD><CAA4><EFBFBD><EFBFBD>硢<EFBFBD><E7A1A2><EFBFBD>٤Ƥ<D9A4><C6A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ѹ<EFBFBD><D1B9>򤢤ʤ<F2A4A2A4><CAA4><EFBFBD><EFBFBD>Ȥ<EFBFBD><C8A4><EFBFBD>"
-"<22>ݤ򸫤<DDA4>ɬ<EFBFBD>פ<EFBFBD><D7A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ū<EFBFBD><C5AA><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ˤϸ<CBA4><CFB8><EFBFBD><EFBFBD>Ƥ<EFBFBD><C6A4>ޤ<EFBFBD><DEA4>󡣤<EFBFBD><F3A1A3A4>Τ<EFBFBD><CEA4>ᡢ"
-"<22><>ǽ<EFBFBD>ʤ<EFBFBD> debconf <20><><EFBFBD>Ȥ<EFBFBD><C8A4>Τ<EFBFBD><CEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ǥ<EFBFBD><C7A4><EFBFBD>"
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "<22><EFBFBD><EFA1BC><EFBFBD><EFBFBD><EFBFBD>롼<EFBFBD><EBA1BC>/<2F>ɥᥤ<C9A5><E1A5A4>̾<EFBFBD>ϲ<EFBFBD><CFB2>Ǥ<EFBFBD><C7A4><EFBFBD>?"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"<22><><EFBFBD><EFBFBD><EFBFBD>ϥ<EFBFBD><CFA5>饤<EFBFBD><E9A5A4><EFBFBD><EFBFBD><EFBFBD>Ȥ<EFBFBD><C8A4><EFBFBD><EFBFBD>Ȳ񤵤줿<F1A4B5A4>ݤˤ<DDA4><CBA4>ʤ<EFBFBD><CAA4>Υ<EFBFBD><CEA5><EFBFBD><EFBFBD>Ф<EFBFBD><D0A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFA1BC><EFBFBD><EFBFBD><EFBFBD>롼<EFBFBD>פ<EFBFBD><D7A4><EFBFBD>"
-"<22>椷<EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Υѥ<CEA5><D1A5>᡼<EFBFBD><E1A1BC><EFBFBD><EFBFBD> security=domain <20><><EFBFBD>꤬<EFBFBD>Ȥ<EFBFBD><C8A4>줿<EFBFBD>Ȥ<EFBFBD><C8A4>Υɥᥤ<C9A5><E1A5A4>̾<EFBFBD><CCBE><EFBFBD><EFBFBD>"
-"<22>椷<EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>"
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "<22>ѥ<EFBFBD><D1A5><EFBFBD>ɤΰŹ沽<C5B9><E6B2BD><EFBFBD>Ȥ<EFBFBD><C8A4>ޤ<EFBFBD><DEA4><EFBFBD>?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"<22>Ƕ<EFBFBD><C7B6><EFBFBD> Windows <20><><EFBFBD>饤<EFBFBD><E9A5A4><EFBFBD><EFBFBD><EFBFBD>ȤϰŹ沽<C5B9><E6B2BD><EFBFBD>줿<EFBFBD>ѥ<EFBFBD><D1A5><EFBFBD>ɤ<EFBFBD><C9A4>Ȥä<C8A4> SMB <20><><EFBFBD><EFBFBD><EFBFBD>ФȤ<D0A4><C8A4><EFBFBD>"
-"<22><><EFBFBD>ꤷ<EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ꥢ<EFBFBD>ƥ<EFBFBD><C6A5><EFBFBD><EFBFBD>ȥѥ<C8A5><D1A5><EFBFBD>ɤ<EFBFBD><C9A4>Ȥ<EFBFBD><C8A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ϡ<EFBFBD><CFA1><EFBFBD><EFBFBD>ʤ<EFBFBD><CAA4><EFBFBD> Windows <20>Υ쥸"
-"<22><><EFBFBD>ȥ<EFBFBD><C8A5>Υѥ<CEA5><D1A5>᡼<EFBFBD><E1A1BC><EFBFBD><EFBFBD><EFBFBD>ѹ<EFBFBD><D1B9><EFBFBD><EFBFBD><EFBFBD>ɬ<EFBFBD>פ<EFBFBD><D7A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD>Ź沽<C5B9><E6B2BD><EFBFBD>줿<EFBFBD>ѥ<EFBFBD><D1A5><EFBFBD>ɤ<EFBFBD><C9A4>Ȥ<EFBFBD><C8A4><EFBFBD><EFBFBD><EFBFBD>"
-"<22><><EFBFBD>侩<EFBFBD><E4BEA9><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>硢ͭ<E7A1A2><CDAD><EFBFBD><EFBFBD> /etc/samba/smbpasswd <20>ե<EFBFBD><D5A5><EFBFBD><EFBFBD>뤬<EFBFBD><EBA4AC><EFBFBD>뤳<EFBFBD>Ȥ<EFBFBD>"
-"<22><>ǧ<EFBFBD><C7A7><EFBFBD><EFBFBD><EFBFBD>ƥ桼<C6A5><E6A1BC><EFBFBD>Υѥ<CEA5><D1A5><EFBFBD>ɤ<EFBFBD> smbpasswd <20><><EFBFBD>ޥ<EFBFBD><DEA5>ɤ<EFBFBD><C9A4>Ȥä<C8A4><C3A4><EFBFBD><EFBFBD>ꤷ<EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>"
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Samba <20>ѥ<EFBFBD><D1A5><EFBFBD>ɥǡ<C9A5><C7A1><EFBFBD><EFBFBD>١<EFBFBD><D9A1><EFBFBD> /var/lib/samba/passdb.tdb <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"Windows <20>ΤۤȤ<DBA4><C8A4>ɤΥС<CEA5><D0A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Υǥե<C7A5><D5A5><EFBFBD><EFBFBD>Ȥȸߴ<C8B8><DFB4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ݤĤ<DDA4><C4A4>ᡢSamba <20>ϰŹ沽"
-"<22><><EFBFBD>줿<EFBFBD>ѥ<EFBFBD><D1A5><EFBFBD>ɤ<EFBFBD><C9A4>Ȥä<C8A4><C3A4><EFBFBD><EFBFBD>ꤵ<EFBFBD><EAA4B5><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ϥ桼<CFA5><E6A1BC><EFBFBD>Υѥ<CEA5><D1A5><EFBFBD>ɤ<EFBFBD> /etc/passwd "
-"<22>Ȥ<EFBFBD><C8A4>̤Υե<CEA5><D5A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>˳<EFBFBD>Ǽ<EFBFBD><C7BC><EFBFBD>뤳<EFBFBD>Ȥ<EFBFBD>ɬ<EFBFBD>פȤ<D7A4><C8A4>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Υե<CEA5><D5A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ϼ<EFBFBD>ưŪ<C6B0>˺<EFBFBD><CBBA><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
-"<22><><EFBFBD>Ȥ<EFBFBD><C8A4>Ǥ<EFBFBD><C7A4>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ѥ<EFBFBD><D1A5><EFBFBD>ɤ<EFBFBD> smbpasswd <20><><EFBFBD>¹Ԥ<C2B9><D4A4>Ƽ<EFBFBD>ư<EFBFBD><C6B0> (<28><><EFBFBD>ʤ<EFBFBD><CAA4><EFBFBD><EFBFBD>뤤<EFBFBD>ϥ桼"
-"<22><><EFBFBD><EFBFBD>) <20>ɲä<C9B2><C3A4>ʤ<EFBFBD><CAA4><EFBFBD><EFBFBD>Фʤ餺<CAA4><E9A4BA><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ϥäƺǿ<C6BA><C7BF><EFBFBD><EFBFBD>֤<EFBFBD><D6A4>ݤ<EFBFBD>³<EFBFBD><C2B3><EFBFBD><EFBFBD><EFBFBD>褦<EFBFBD><E8A4A6><EFBFBD><EFBFBD><EFBFBD>Ƥ<EFBFBD><C6A4><EFBFBD>ɬ"
-"<22>פ<EFBFBD><D7A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Υե<CEA5><D5A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ʤ<EFBFBD><CAA4><EFBFBD><EFBFBD>硢<EFBFBD>ץ쥤<D7A5><ECA5A4><EFBFBD>ƥ<EFBFBD><C6A5><EFBFBD><EFBFBD>ȥѥ<C8A5><D1A5><EFBFBD>ɤ<EFBFBD><C9A4>Ȥ<EFBFBD>"
-"<22>褦 Samba (<28><><EFBFBD><EFBFBD><EFBFBD>Ӥ<EFBFBD><D3A4><EFBFBD><EFBFBD>餯<EFBFBD><E9A4AF><EFBFBD>ʤ<EFBFBD><CAA4>Υ<EFBFBD><CEA5>饤<EFBFBD><E9A5A4><EFBFBD><EFBFBD><EFBFBD>ȥޥ<C8A5><DEA5><EFBFBD>) <20>κ<EFBFBD><CEBA><EFBFBD><EFBFBD>꤬ɬ<EAA4AC>פǤ<D7A4><C7A4><EFBFBD><EFBFBD><EFBFBD>"
-"<22>٤ˤĤ<CBA4><C4A4>Ƥϡ<C6A4>samba-doc <20>ѥå<D1A5><C3A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ˤ<EFBFBD><CBA4><EFBFBD> /usr/share/doc/samba-doc/htmldocs/"
-"ENCRYPTION.html <20>򻲾Ȥ<F2BBB2BE><C8A4>Ƥ<EFBFBD><C6A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "Samba <20>Υ<EFBFBD><CEA5><EFBFBD><EFBFBD>ե<EFBFBD><D5A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ϰ<EFBFBD>ư<EFBFBD><C6B0><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD>"
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"Debian <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> Samba 2.2 <20>ν<EFBFBD><CEBD><EFBFBD><EFBFBD>ѥå<D1A5><C3A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>顢ξ Samba <20>ǡ<EFBFBD><C7A1><EFBFBD><EFBFBD><EFBFBD> (nmbd <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> "
-"smbd) <20>Υ<EFBFBD><CEA5><EFBFBD><EFBFBD>ե<EFBFBD><D5A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> /var/log/samba <20>˳<EFBFBD>Ǽ<EFBFBD><C7BC><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>褦<EFBFBD>ˤʤäƤ<C3A4><C6A4>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD>ե<EFBFBD><D5A5><EFBFBD>"
-"<22><>̾<EFBFBD><CCBE> nmbd <20><> smbd <20><><EFBFBD≯Ĥˤʤ<CBA4><CAA4>褦<EFBFBD><E8A4A6>log.nmbd <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> log.smbd <20>Ȥʤ<C8A4><CAA4>ޤ<EFBFBD><DEA4><EFBFBD>"
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr "/var/log/ <20>ˤ<EFBFBD><CBA4>ä<EFBFBD><C3A4>Ť<EFBFBD><C5A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ե<EFBFBD><D5A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ͽ<EFBFBD><CFBF><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>˰<EFBFBD>ư<EFBFBD><C6B0><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>"
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "inetd <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> nmbd <20>μ¹ԤϤ⤦<CFA4><E2A4A6><EFBFBD>ݡ<EFBFBD><DDA1>Ȥ<EFBFBD><C8A4><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"<22><><EFBFBD>ʤ<EFBFBD><CAA4>Υ<EFBFBD><CEA5><EFBFBD><EFBFBD>ƥ<EFBFBD><C6A5>ˤ<EFBFBD> inetd <20><><EFBFBD><EFBFBD> nmbd <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> smbd <20><><EFBFBD><EFBFBD>ư<EFBFBD><C6B0><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>꤬<EFBFBD><EAA4AC><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
-"<22><><EFBFBD><EFBFBD><EFBFBD>С<EFBFBD><D0A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 2.999+3.0.alpha20-4 <20>ʹߤǤϡ<C7A4>nmbd <20><> inetd <20><><EFBFBD><EFBFBD><EFBFBD>Ϥ⤦<CFA4><E2A4A6>ư<EFBFBD><C6B0><EFBFBD><EFBFBD>"
-"<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>/etc/init.d/samba <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ȥ<EFBFBD><C8A5>åץ<C3A5><D7A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ץȤ<D7A5><C8A4>ѹ<EFBFBD><D1B9><EFBFBD><EFBFBD>Ƥ<EFBFBD><C6A4><EFBFBD><EFBFBD>ΤǤ<CEA4><C7A4><EFBFBD><EFBFBD>С<EFBFBD>"
-"nmbd <20><><EFBFBD><EFBFBD>ư<EFBFBD><C6B0><EFBFBD><EFBFBD><EFBFBD>褦<EFBFBD><E8A4A6>ư<EFBFBD><C6B0>Ĵ<EFBFBD><C4B4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ɬ<EFBFBD>פ<EFBFBD><D7A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ǥ<EFBFBD><C7A4>礦<EFBFBD><E7A4A6>"
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "<22>ǡ<EFBFBD><C7A1><EFBFBD><EFBFBD><EFBFBD>, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "<22>ɤΤ褦<CEA4><E8A4A6> Samba <20><><EFBFBD>¹Ԥ<C2B9><D4A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ǥ<EFBFBD><C7A4><EFBFBD>?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"Samba <20>ǡ<EFBFBD><C7A1><EFBFBD><EFBFBD><EFBFBD> smbd <20><><EFBFBD>̾<EFBFBD><CCBE>Υǡ<CEA5><C7A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȥ<EFBFBD><C8A4>Ƥμ¹Ԥޤ<D4A4><DEA4><EFBFBD> inetd <20><><EFBFBD><EFBFBD><EFBFBD>μ¹Ԥ<C2B9><D4A4>Ǥ<EFBFBD>"
-"<22>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD>ǡ<EFBFBD><C7A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȥ<EFBFBD><C8A4>Ƽ¹Ԥ<C2B9><D4A4><EFBFBD><EFBFBD>Τ<EFBFBD><CEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>μ<EFBFBD><CEBC>ʤǤ<CAA4><C7A4><EFBFBD>"
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "/etc/samba/smbpasswd <20><> /var/lib/samba/passdb.tdb <20>˰<EFBFBD>ư<EFBFBD><C6B0><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-"Samba 3.0 <20>Ǥϡ<C7A4>/etc/samba/smbpasswd <20>ե<EFBFBD><D5A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>롢<EFBFBD><EBA1A2><EFBFBD>꿷<EFBFBD><EABFB7><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>괰<EFBFBD><EAB4B0>"
-"<22><> SAM <20>ǡ<EFBFBD><C7A1><EFBFBD><EFBFBD>١<EFBFBD><D9A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD>󥿡<EFBFBD><F3A5BFA1>ե<EFBFBD><D5A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƴ<EFBFBD><C6B3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ƥ<EFBFBD><C6A4>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD>¸<EFBFBD><C2B8> smbpasswd <20>ե<EFBFBD>"
-"<22><><EFBFBD><EFBFBD><EFBFBD><EFBFBD> /var/lib/samba/passdb.tdb <20>˰ܹԤ<DCB9><D4A4>ޤ<EFBFBD><DEA4><EFBFBD>? <20>̤<EFBFBD> pdb <20>Хå<D0A5><C3A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> (LDAP "
-"<22>ʤ<EFBFBD>) <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>˷ײ褷<D7B2>Ƥ<EFBFBD><C6A4><EFBFBD><EFBFBD>ΤǤ<CEA4><C7A4><EFBFBD><EFBFBD>С<EFBFBD><D0A1><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ǥ<EFBFBD> '<27><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>' <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>٤<EFBFBD><D9A4>Ǥ<EFBFBD><C7A4><EFBFBD>"
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "<22><><EFBFBD>ʤ<EFBFBD><CAA4><EFBFBD> smb.conf <20>Ͻ<EFBFBD><CFBD><EFBFBD>ľ<EFBFBD><C4BE><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD>!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""
-"SWAT <20>Ϥ<EFBFBD><CFA4>ʤ<EFBFBD><CAA4><EFBFBD> smb.conf <20>ե<EFBFBD><D5A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ľ<EFBFBD><C4BE><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD>SWAT <20>ϥ<EFBFBD><CFA5><EFBFBD><EFBFBD>ȥ<EFBFBD><C8A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>"
-"<22><><EFBFBD>٤ƤΥ<C6A4><CEA5><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ȥ<EFBFBD><C8A4><EFBFBD><EFBFBD><EFBFBD> include= <20><> copy= <20><><EFBFBD>ץ<EFBFBD><D7A5><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ޤ<EFBFBD><DEA4><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ť˺<C5A4><CBBA><EFBFBD><EFBFBD><EFBFBD>"
-"<22>줿 smb.conf <20><><EFBFBD><EFBFBD><EFBFBD>äƤ<C3A4><C6A4><EFBFBD><EFBFBD>ΤǤ<CEA4><C7A4><EFBFBD><EFBFBD>С<EFBFBD><D0A1>Хå<D0A5><C3A5><EFBFBD><EFBFBD>åפ<C3A5><D7A4>Ƥ<EFBFBD><C6A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>SWAT <20><><EFBFBD>Ȥ<EFBFBD><C8A4>ʤ<EFBFBD>"
-"<22>Ǥ<EFBFBD><C7A4><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>!"

packaging/Debian/debian-sarge/po/nl.po

@@ -1,302 +0,0 @@
-#
-#    Translators, if you are not familiar with the PO format, gettext
-#    documentation is worth reading, especially sections dedicated to
-#    this format, e.g. by running:
-#         info -n '(gettext)PO Files'
-#         info -n '(gettext)Header Entry'
-#
-#    Some information specific to po-debconf are available at
-#            /usr/share/doc/po-debconf/README-trans
-#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-#
-#    Developers do not need to manually edit POT or PO files.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: samba\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2003-08-30 02:03+0100\n"
-"Last-Translator: Bart Cornelis <cobaco@linux.be>\n"
-"Language-Team: dutch <debian-l10n-dutch@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=iso-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Karakterset voor Unix bestandsysteem"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"U heeft momenteel een \"karakterset\" ingesteld in uw smb.conf. In Samba 3.0 "
-"werd deze optie vervangen door een nieuwe \"unix karakterset\" optie. "
-"Gelieve de karakterset die u voor deze nieuwe optie wil gebruiken aan te "
-"geven, deze bepaald hoe Samba de bestandsnamen in het bestandsysteem "
-"interpreteerd."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr ""
-"Uw smb.conf bestand wordt niet aangepast indien u deze optie leeg laat."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Karakterset voor DOS-clients"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"U heeft momenteel een \"client code pagina\" ingesteld in uw smb.conf. In "
-"Samba 3.0 werd deze optie vervangen door de optie \"dos karakterset\". "
-"Gelieve de karakterset die u voor deze nieuwe optie wilt gebruiken aan te "
-"geven. In de meeste gevallen zal het standaard ingevulde antwoord voldoen. "
-"Merk op dat deze optie niet nodig is voor ondersteuning van Windows-clients, "
-"enkel voor DOS-clients. Uw smb.conf wordt niet veranderd wanneer u deze "
-"optie blank laat."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr "smb.conf aanpassen om de WINS instellingen van DHCP te gebruiken?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"Indien uw computer zijn ip-addres informatie van een DHCP-server op het "
-"netwerk haalt, voorziet deze mogelijks ook informatie betreffende de op het "
-"netwerk aanwezige WINS-servers (\"NetBIOS naam servers\").\" Dit vereist een "
-"verandering aan uw smb.conf bestand, opdat de door DHCP doorgegeven WINS "
-"instellingen automatisch gelezen worden van /etc/samba/dhcp.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-"U dient het dhcp3-client-pakket ge<67>nstalleert te hebben om van deze optie "
-"gebruik te maken."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "Configuratie in smb.conf met debconf beheren?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"De resterende Samba configuratie beslaat parameters in /etc/samba/smb.conf, "
-"het configuratiebestand dat gebruikt wordt voor de Samba programmas (nmbd en "
-"smbd). Uw huidige smb.conf bevat een 'include' regel of een optie die "
-"meerdere regels beslaat, dit kan debconf mogelijks in verwarring brenngen. "
-"Indien debconf in verwarring raakt dient u uw smb.conf handmatig aan te "
-"passen om samba terug werkend te krijgen."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"Indien u geen gebruik maakt van debconf voor het beheer van smb.conf dient u "
-"alle configuratie instellingen zelf te doen, en zult u geen voordeel halen "
-"uit de periodieke configuratie verbeteringen. Het gebruik van debconf wordt "
-"dan ook aangeraden. "
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Werkgroep/Domeinnaam?"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"Dit bepaald van welke werkgroep uw server deel zal lijken uit te maken bij "
-"het beantwoorden van vragen door clients. Merk op dat deze parameter ook de "
-"domeinnaam die gebruikt wordt voor de security=domein instelling bepaald."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "Wachtwoord versleuteling gebruiken?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"Recente Windows clients maken gebruik van versleutelde wachtwoorden voor de "
-"communicatie met SMB-servers. Indien u onversleutelde tekst  wachtwoorden "
-"wilt gebruiken dient u een parameter te veranderen in de Windows registry. "
-"Het gebruik van versleutelde wachtwoorden wordt aangeraden. Indien u dit "
-"doet zorg er dan voor dat u een geldig /etc/samba/smbpasswd bestand heeft en "
-"dat u de wachtwoorden daar voor elke gebruiker met behulp van smbpasswd "
-"insteld. "
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Samba wachtwoord database, /var/lib/samba/passdb.tdb, aanmaken?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"Om compatibel te zijn met de standaard instellingen van de meeste "
-"Windowsversies dient Samba gebruik te maken van versleutelde wachtwoorden. "
-"Dit vereist dat de gebruikerswachtwoorden opgeslagen worden in een bestand "
-"dat verschilt van /etc/passwd. Dit bestand kan automatisch aangemaakt "
-"worden, maar de wachtwoorden dienen handmatig (door de gebuiker) toegevoegt "
-"te worden met het smbpasswd commando. U dient dit bestand in de toekomst ook "
-"aktueel te houden. Indien u dit bestand niet aanmaakt zult u samba (en naar "
-"alle waarschijnlijkheid de client machines) moeten herconfigureren zodat "
-"deze onversleutelde wachtwoorden gebruiken. Zie /usr/share/doc/samba-doc/"
-"htmldocs/ENCRYPTION.html uit het samba-doc pakket voor meer details."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "Samba's log bestanden zijn verhuisd."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"Vanaf de eerste Debian pakketten vaan Samba versie 2.2 zijn de log bestanden "
-"van beide Samba daemons (nmbd en smbd) opgeslagen in /var/log/samba/. De log "
-"bestanden voor nmbd en smbd zijn, respectievelijk, log.nmbd en log.smbd."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-"De oude logbestanden in /var/log worden voor u naar de nieuwe locatie "
-"verplaatst."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "nmbd vanuit inetd draaien wordt niet langer ondersteund"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"Uw systeem was geconfigureerd om nmbd en smbd vanuit inetd te starten. Vanaf "
-"versie 2.999+3.0.alpha20-4 kan nmbd niet langer door inetd gestart worden. "
-"Indien u uw /etc/init.d/samba startup-script aangepast had, dient u dit "
-"mogelijks aan te passen opdat nmbd zou starten."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "daemons, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Hoe wilt u Samba draaien?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"De Samba  daemon smbd kan als een normale daemon of via inetd draaien. Als "
-"een daemon is de aangeraden aanpak."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "/etc/samba/smbpasswd verplaatsen naar /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-"Samba 3.0 introduceert een nieuwe, meer complete SAM databaseinterface die "
-"het /etc/samba/smbpasswd bestand overstijgt. \"Wilt u dat ik uw bestaand "
-"smbpasswd bestand voor u naar /var/lib/samba/passdb.tdb migreer? Indien u "
-"van plan bent om, in plaats hiervan, een ander pdb-backend (e.g. LDAP) te "
-"gebruiken dient u hier 'nee' te antwoorden."
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "Uw smb.conf wordt herschreven!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""
-"SWAT zal uw smb.conf bestand herschrijven. Het zal de ingangen anders "
-"schikken en alle comments, include= en copy= opties verwijderen. Als u een, "
-"met veel zorg, handmatig opgebouwd smb.conf bestand heeft, maak dan een "
-"reservekopie of zie van het gebruik van SWAT af! "

packaging/Debian/debian-sarge/po/pt.po

@@ -1,295 +0,0 @@
-# translation of pt.po to Portuguese
-# translation of samba Debian debconf template to Portuguese
-# Miguel Figueiredo <elmig@debianpt.org>, 2004.
-#
-
-msgid ""
-msgstr ""
-"Project-Id-Version: samba 3.0.9-1\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2005-01-05 19:25+0000\n"
-"Last-Translator: Miguel Figueiredo <elmig@debianpt.org>\n"
-"Language-Team: Portuguese <traduz@debianpt.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Conjunto de caracteres para sistema de ficheiros UNIX"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"Actualmente tem um \"character set\" configurado no seu smb.conf. No "
-"Samba 3.0, esta opção é substituída por uma nova opção, \"unix charset\". "
-"Por favor especifique o conjunto de caracteres para utilizar com esta nova "
-"opção, que controla como o Samba interpreta os nomes dos ficheiros no "
-"sistema de ficheiros."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr "Se deixar esta opção vazia, o seu smb.conf não será alterado."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Conjunto de caracteres para clientes DOS"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"Actualmente tem um \"client code page\" definido no seu smb.conf.  No Samba "
-"3.0, esta opção é substituída pela opção \"dos charset\".  Por favor "
-"especifique o conjunto de caracteres que quer utilizar para esta nova opção. "
-"Na maioria dos casos, o valor por omissão escolhido para si será suficiente. "
-"Note que esta opção não é necessária para suportar clientes em Windows, é "
-"apenas para clientes em DOS.  Se deixar esta opção vazia, o seu smb.conf "
-"não será alterado."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr "Modificar o smb.conf para utilizar definições de WINS a partir de DHCP?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"Se o seu computador obtém a informação do endereço IP a partir de um "
-"servidor de DHCP na rede, o servidor de DHCP pode também fornecer informação "
-"acerca de servidores de WINS (\"servidor de nomes NetBIOS\") presentes na "
-"rede.  Isto requer uma alteração no seu ficheiro smb.conf de modo que as "
-"definições de WINS fornecidas por DHCP sejam automaticamente lidas a partir "
-"de /etc/samba/dhcp.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-"Tem de ter o pacote dhcp3-client instalado para tirar vantagem desta "
-"característica."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "Configurar o smb.conf através de debconf?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"O resto da configuração de Samba trata de questões que afectam parâmetros "
-"em /etc/samba/smb.conf, que é o ficheiro utilizado para configurar os "
-"programas de Samba (nmbd e smbd). O seu smb.conf actual contém uma linha "
-"'include' ou uma opção que se espalha em multiplas linhas, a qual pode "
-"confundir o debconf e necessitar que você edite à mão o smb.conf par o ter "
-"novamente operacional."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"Se não utilizar o debconf para configurar o smb.conf, terá de lidar você "
-"mesmo com quaisquer alterações da configuração, e não poderá tirar partido "
-"de melhorias de configuração periódicas.  Assim sendo, a utilização do "
-"debconf é remomendada se possível."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Nome do Grupo de trabalho/Domínio ?"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"Isto controla qual o grupo de trabalho em que o seu servidor vai aparecer "
-"quando questionado pelos clientes. Note que este parâmetro também controla "
-"o nome de Domínio quando utilizado com a definição security=domain."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "Utilizar encriptação de passwords?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"Os clientes de Windows recentes comunicam com servidores de SMB utilizando "
-"passwords encriptadas. Se deseja utilizar passwords de texto puro você vai "
-"necessitar alterar um parâmetro no seu registo do Windows. É recomendado que "
-"utilize passwords encriptadas. Se o fizer, assegure-se que tem um ficheiro "
-"/etc/samba/smbpasswd válido e que defina lá passwords para cada um dos "
-"utilizadores utilizando o comando smbpasswd."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Criar base de dados de passwords samba, /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"Para ser compatível com valores por omissão na maioria das versões do "
-"Windows, o Samba tem de ser configurado para utilizar passwords encriptadas. "
-"Isto requer que as passwords de utilizador sejam guardadas num ficheiro "
-"separado de /etc/passwd. Este ficheiro pode ser criado automaticamente, mas "
-"as passwords têm de ser adicionadas manualmente (por si ou pelo utilizador) "
-"executando o comando smbpasswd, e você tem de mantê-las actualizadas no "
-"futuro.  Se não o criar, você terá de reconfigurar o samba (e provavelmente "
-"as máquinas clientes) para utilizar passwords de texto puro. Veja "
-"/usr/share/doc/samba-doc/htmldocs/ENCRIPTION.html do pacote samba-doc para "
-"mais detalhes."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "Os ficheiros de log de Samba foram movidos."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"Desde os primeiros pacotes para Debian de Samba 2.2 que os ficheiros de log "
-"para ambos os daemons de Samba (nmbd e smbd) são agora guardados em "
-"/var/log/samba/. Os nomes dos ficheiros são respectivamente log.nmbd e "
-"log.smbd, para o nmbd e smbd."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-"Os ficheiros de log antigos que estavam em /var/log/ vão ser movidos, para "
-"si, para a nova localização."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "Executar o nmbd a partir de inetd já não é suportado"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"O seu sistema foi previamente configurado para iniciar o nmbd e smbd a "
-"partir de inetd.  A partir da versão 2.999+3.0.alpha20-4, o nmbd já não "
-"inicia a partir do inetd.  Se você modificou o seu script de inicialização "
-"/etc/init.d/samba, pode ter de o ajustar agora à mão de modo a que o nmbd "
-"inicie."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "daemons, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Como deseja correr o Samba?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"O daemon de Samba smbd pode correr como um daemon normal ou a partir de "
-"inetd. Executá-lo como um daemon é a aproximação recomendada."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "Mover /etc/samba/smbpasswd para /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-""
-"O Samba 3.0 introduz um novo e mais completo interface com a base de dados "
-"SAM, que suplanta o ficheiro /etc/samba/smbpasswd. Deseja que o seu "
-"ficheiro existente smbpasswd seja migrado para /var/lib/samba/passdb.tdb "
-"para si? Se planeia utilizar em vez disso outro backend pdb (e.g., LDAP), "
-"deve responder aqui 'no'."
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "A sua configuração smb.conf será re-escrita!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""
-"O SWAT irá reescrever o seu ficheiro smb.conf. Irá reordenar as entradas e "
-"apagar todos os comentários, e opções include= e copy=. Se tem um smb.conf "
-"cuidadosamente trabalhado faça uma cópia de segurança dele ou não utilize "
-"o SWAT!"

packaging/Debian/debian-sarge/po/pt_BR.po

@@ -1,309 +0,0 @@
-#
-#    Translators, if you are not familiar with the PO format, gettext
-#    documentation is worth reading, especially sections dedicated to
-#    this format, e.g. by running:
-#         info -n '(gettext)PO Files'
-#         info -n '(gettext)Header Entry'
-#
-#    Some information specific to po-debconf are available at
-#            /usr/share/doc/po-debconf/README-trans
-#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-#
-#    Developers do not need to manually edit POT or PO files.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: samba\n"
-"Report-Msgid-Bugs-To: debian-l10n-portuguese@lists.debian.org\n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2005-05-10 14:07-0300\n"
-"Last-Translator: Andr<64> Lu<4C>s Lopes <andrelop@debian.org>\n"
-"Language-Team: Debian-BR Project <debian-l10n-portuguese@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=ISO-8859-1\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Conjunto de caracteres para sistema de arquivos Unix"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"Atualmente existe um \"conjunto de caracteres\" (\"character set\") "
-"configurado em seu arquivo smb.conf. No Samba 3.0, esta op<6F><70>o foi "
-"substitu<74>da por uma nova op<6F><70>o, a op<6F><70>o \"unix charset\". Por favor, "
-"especifique o conjunto de caracteres a ser usado para essa nova op<6F><70>o, "
-"a qual controla como o Samba interpreta nomes de arquivos no sistema de "
-"arquivos."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr ""
-"Caso voc<6F> deixe esta op<6F><70>o em branco, seu arquivo smb.conf n<>o ser<65> "
-"modificado."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Conjunto de caracteres para clientes DOS"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"Atualmente existe um \"c<>digo de p<>gina do cliente\" (\"client code page\") "
-"definido em seu arquivo smb.conf. No Samba 3.0, essa op<6F><70>o foi substitu<74>da "
-"pela op<6F><70>o \"dos charset\". Por favor, especifique o conjunto de caracteres "
-"que voc<6F> deseja usar para essa nova op<6F><70>o. Note que essa op<6F><70>o n<>o <20> "
-"necess<73>ria para suportar clientes Windows, mas sim v<>lida somente para "
-"clientes DOS. Caso voc<6F> deixe essa op<6F><70>o em branco, seu arquivo smb.conf n<>o "
-"ser<65> modificado."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr "Modificar smb.conf para usar configura<72><61>es WINS fornecidas via DHCP ?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"Caso seu computador obtenha as informa<6D><61>es de endere<72>amento IP de um "
-"servidor DHCP na rede, o servidor DHCP poder<65> tamb<6D>m fornecer informa<6D><61>es "
-"sobre servidor WINS (\"Servidor de Nomes NetBIOS\") presentes na rede. Para "
-"que o Samba leia as configura<72><61>es WINS fornecidas pelo servidor DHCP "
-"automaticamente do arquivo /etc/samba/dhcp.conf, <20> preciso modificar seu "
-"arquivo smb.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-"Voc<6F> deve possuir o pacote dhcp3-client instalado para poder usar esse "
-"recurso."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "Configurar o arquivo smb.conf atrav<61>s do debconf ?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"O restante da configura<72><61>o do Samba lida com quest<73>es que afetam par<61>metros "
-"no arquivo /etc/samba/smb.conf, que <20> o arquivo usado para configurar os "
-"programas Samba (nmbd e smbd). Seu arquivo smb.conf atual cont<6E>m uma linha "
-"'include' ou uma op<6F><70>o que ocupa diversas linhas, o que pode confundir o "
-"debconf e requerer que voc<6F> edite seu arquivo smb.conf manualmente para "
-"torn<72>-lo funcional novamente."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"Caso voc<6F> opte por n<>o usar o debconf para configurar o arquivo smb.conf, "
-"ser<65> necess<73>rio que voc<6F> lide com quaisquer mudan<61>as de configura<72><61>es "
-"manualmente e voc<6F> n<>o poder<65> aproveitar os melhoramentos peri<72>dicos de "
-"configura<72><61>o. Por esse motivo, <20> recomendado usar o debconf, caso seja "
-"poss<73>vel."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Nome de Dom<6F>nio/Grupo de Trabalho ?"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"Este par<61>metro controla em qual grupo de trabalho (workgroup) seu servidor "
-"parecer<65> estar quando uma pesquisa pelo mesmo for feita por clientes. Note "
-"que este par<61>metro tamb<6D>m controla o nome de Dom<6F>nio usado com a "
-"configura<72><61>o security=domain."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "Usar senhas criptografadas ?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"Clientes Windows atuais comunicam-se com servidores SMB usando senhas "
-"criptografadas. Caso voc<6F> queira usar senhas em texto puro voc<6F> precisar<61> "
-"modificar um par<61>metro no registro de seu Windows. <20> recomendado que voc<6F> "
-"use senhas criptografadas. Caso as utilize, certifique-se de possuir um "
-"arquivo /etc/samba/smbpasswd v<>lido e que voc<6F> tenha definido senhas no "
-"mesmo para cada usu<73>rio, utilizando o comando smbpasswd."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Gerar a base de dados para senhas /var/lib/samba/passdb.tdb ?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"Para compatibilidade com os padr<64>es adotados em todas as vers<72>es atuais do "
-"Windows, o Samba deve ser configurado para usar senhas criptografadas. Isso "
-"requer que as senhas dos usu<73>rios sejam armazenadas em um arquivo diferente "
-"do arquivo /etc/passwd. Esse arquivo pode ser criado automaticamente, mas "
-"as senhas devem ser definidas manualmente (por voc<6F> ou pelo usu<73>rio) "
-"executando o utilit<69>rio smbpasswd. Voc<6F> deve certificar-se de manter esse "
-"arquivo atualizado futuramente. Caso voc<6F> n<>o crie esse arquivo, voc<6F> "
-"ter<65> que reconfigurar o Samba (e provavelmente suas m<>quinas clientes) "
-"para utiliza<7A><61>o de senhas em texto puro. Consulte a documenta<74><61>o do pacote "
-"samba-doc em /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html para "
-"maiores detalhes."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "Arquivos de log do Samba foram movidos."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"Desde os primeiros pacotes Debian do Samba 2.2, os arquivos de log para "
-"ambos os daemons Samba (nmbd e smbd) s<>o armazenados no diret<65>rio "
-"/var/log/samba/. Os nomes desses arquivos s<>o log.nmbd e log.smbd, para "
-"o nmbd e para o smbd, respectivamente."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-"Os antigos arquivos de log que estavam no diret<65>rio /var/log/ ser<65>o "
-"movidos para o novo local para voc<6F>."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "A execu<63><75>o do nmbd a partir do inetd n<>o <20> mais suportada"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"Seu sistema foi previamente configurado para iniciar os daemons nmbd e smbd "
-"a partir do inetd. Desde a vers<72>o 2.999+3.0.alpha20-4, o nmbd n<>o mais ser<65> "
-"iniciado a partir do inetd. Caso voc<6F> tenha modificado seu script de "
-"inicializa<7A><61>o /etc/init.d/samba, voc<6F> precisar<61> ajust<73>-lo manualmente "
-"agora para que o nmbd seja iniciado."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "daemons, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Como voc<6F> deseja que o Samba seja executado ?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"O servi<76>o Samba smbd pode ser executado como daemon normal ou a partir do "
-"inetd. Execut<75>-lo como daemon <20> o m<>todo recomendado."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "Mover /etc/samba/smbpasswd para /var/lib/samba/passdb.tdb ?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-"O Samba 3.0 introduziu uma nova e mais completa interface de base de "
-"dados SAM que substituiu o arquivo /etc/samba/smbpasswd. Voc<6F> gostaria "
-"que o arquivo smbpasswd existente fosse migrado para "
-"/var/lib/samba/passdb.tdb para voc<6F> ? Caso voc<6F> planeje usar um outro "
-"backend (como LDAP, por exemplo), n<>o aceite mover o arquivo smbpasswd."
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "Seu arquivo smb.conf ser<65> reescrito !"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""
-"O SWAT ir<69> reescrever seu arquivo smb.conf. Ele ir<69> rearrumar as entradas e "
-"apagar todos os coment<6E>rios, op<6F><70>es include= e copy=. Caso voc<6F> possua um "
-"arquivo smb.conf cuidadosamente criado e comentado, fa<66>a uma c<>pia de "
-"seguran<61>a (backup) do mesmo ou n<>o use o SWAT !"

packaging/Debian/debian-sarge/po/ru.po

@@ -1,223 +0,0 @@
-# translation of samba_3.0.14a-2_ru.po to Russian
-# Yuriy Talakan' <yt@amur.elektra.ru>, 2005.
-msgid ""
-msgstr ""
-"Project-Id-Version: samba_3.0.14a-2_ru\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2005-05-21 21:43+1000\n"
-"Last-Translator: Yuriy Talakan' <yt@amur.elektra.ru>\n"
-"Language-Team: Russian <debian-l10n-russian@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.9.1\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Кодировка для файловой системы Unix"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr "Сейчас у вас есть опция \"character set\" в smb.conf. В Samba 3.0, эта опция заменена на \"unix charset\". Укажите кодировку, которую вы желаете использовать для этой новой опции. Она отвечает за то, как Samba интерпретирует имена файлов в файловой системе."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr "Если вы оставите опцию пустой, ваш smb.conf не будет изменен."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "Кодировка для клиентов DOS"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr "Сейчас у вас есть опция \"client code page\" в smb.conf. В Samba 3.0, эта опция заменена на \"dos charset\". Укажите кодировку, которую вы желаете использовать для этой новой опции. В большинстве случаев значения по умолчанию будет достаточно. Запомните, что эта опция не нужна для поддержки клиентов Windows, она только для клиентов DOS. Если вы оставите опцию пустой, ваш smb.conf не будет изменен."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr "Изменить smb.conf для использования настроек WINS из DHCP?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr "Если ваш компьютер получает информацию о своем IP-адресе от сервера DHCP через сеть, то DHCP-сервер также может предоставлять информацию о серверах WINS(\"серверы имен NetBIOS\"), присутствующих в сети. Это требует внесения изменений в ваш файл smb.conf, чтобы предоставленные через DHCP настройки WINS автоматически читались из /etc/samba/dhcp.conf."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr "Чтобы воспользоваться этой возможностью, вы должны установить пакет dhcp3-client."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "Настроить smb.conf через debconf?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr "Оставшаяся часть настройки Samba состоит из вопросов, которые затрагивают параметры в /etc/samba/smb.conf. Этот файл используется для настройки программ Samba (nmbd и smbd.) Ваш текущий smb.conf содержит строку 'include' или опцию, которая состоит из нескольких строк. Это может смутить debconf и потребовать от вас ручного редактирования вашего smb.conf для восстановления работоспособности."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr "Если вы не используете debconf для настройки smb.conf, то должны самостоятельно позаботиться обо всех изменениях настроек и не сможете воспользоваться преимуществами периодического улучшения настроек. Таким образом, рекомендуется по возможности использовать debconf."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Имя рабочей группы/домена?"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr "Задает рабочую группу, в которой появится ваш сервер, когда его увидят клиенты. Обратите внимение, что этот параметр также задает имя домена, которое используется при security=domain."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "Использовать шифрацию паролей?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr "Современные клиенты Windows общаются с серверами SMB используя шифрованные пароли. Если вы пожелаете использовать открытые пароли, вам придется изменить параметр в реестре Windows. Рекомендуется использовать шифрованные пароли. В этом случае убедитесь, что у вас правильный файл /etc/samba/smbpasswd и что вы установили там пароли для каждого пользователя командой smbpasswd."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Создать базу данных паролей samba, /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr "Для совместимости со значением по умолчанию в большинстве версий Windows, Samba должна быть настроена на использование шифрованных паролей.  Это требует хранения пользовательских паролей в файле, отдельном от /etc/passwd. Этот файл может быть создан автоматически, но пароли должны быть добавлены вручную (вами или пользователем) посредством запуска smbpasswd, и вы должны заботиться о поддержании его в актуальном состоянии в будущем. Если вы не создадите его, то должны перенастроить samba (и вероятно ваши клиентские машины) на использование открытых паролей. Более подробно смотрите в /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html из пакета samba-doc."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "log-файлы Samba переместились."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr "Начиная с первых пакетов Samba 2.2 для Debian, log-файлы для демонов Samba (nmbd и smbd) хранятся теперь в /var/log/samba/. Файлы называются log.nmbd и log.smbd для nmbd и smbd соответственно."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr "Старые log-файлы, которые были в /var/log/, будут перемещены в новое для вас место."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "Запуск nmbd из inetd больше не поддерживается"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr "Ваша система была ранее настроена на запуск nmbd и smbd из inetd.  nmbd с версии 2.999+3.0.alpha20-4 больше не запускается из inetd. Если вы изменили ваш стартовый скрипт /etc/init.d/samba, вам необходимо откорректировать его вручную, чтобы nmbd запускался."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "daemons, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Как вы желаете запускать Samba?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr "Samba-демон smbd может запускаться как обычный демон или из inetd. Рекомендуем выбрать запуск в качестве демона."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "Переместить /etc/samba/smbpasswd в /var/lib/samba/passdb.tdb?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr "Samba 3.0 приносит новый, более полный интерфейс базы данных SAM, который заменяет собой файл /etc/samba/smbpasswd.  Желаете, чтобы ваш существующий файл smbpasswd мигрировал в /var/lib/samba/passdb.tdb?  Если вы планируете вместо него использовать другой интерфейс pdb (например, LDAP), вы должны ответить здесь 'нет'."
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "Ваш smb.conf будет перезаписан!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr "SWAT перепишет ваш файл smb.conf. Он перегруппирует все записи и удалит все комментарии, опции include= и copy=. Если у вас тщательно созданный smb.conf, то сохраните его в безопасном месте или не используйте SWAT!"
-

packaging/Debian/debian-sarge/po/templates.pot

@@ -1,233 +0,0 @@
-#
-#    Translators, if you are not familiar with the PO format, gettext
-#    documentation is worth reading, especially sections dedicated to
-#    this format, e.g. by running:
-#         info -n '(gettext)PO Files'
-#         info -n '(gettext)Header Entry'
-#
-#    Some information specific to po-debconf are available at
-#            /usr/share/doc/po-debconf/README-trans
-#         or http://www.debian.org/intl/l10n/po-debconf/README-trans
-#
-#    Developers do not need to manually edit POT or PO files.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr ""
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr ""
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr ""
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr ""
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr ""
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr ""
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr ""
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr ""
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""

packaging/Debian/debian-sarge/po/tr.po

@@ -1,283 +0,0 @@
-# Turkish translation of samba.
-# This file is distributed under the same license as the samba package.
-# Mehmet Türker <mturker@innova.com.tr>, 2004. 
-# 
-msgid ""
-msgstr ""
-"Project-Id-Version: samba\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2003-08-30 19:08-0500\n"
-"PO-Revision-Date: 2004-06-01 09:42+0300\n"
-"Last-Translator: Mehmet Türker <mturker@innova.com.tr>\n"
-"Language-Team: Turkish <debian-l10n-turkish@lists.debian.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit"
-
-#. Description
-#: ../samba-common.templates:3
-msgid "Character Set for Unix filesystem"
-msgstr "Unix dosya sistemi için karakter seti"
-
-#. Description
-#: ../samba-common.templates:3
-msgid ""
-"You currently have a \"character set\" configured in your smb.conf.  In "
-"Samba 3.0, this option is replaced by a new option, \"unix charset\". Please "
-"specify the character set you wish to use for theis new option, which "
-"controls how Samba interprets filenames on the file system."
-msgstr ""
-"Halihazırda smb.conf yapılandırma dosyanızda \"character set\" ayarı mevcut. "
-"Samba 3.0'da bu seçenek yenisiyle: \"unix charset\" ile değiştirildi. Lütfen "
-"Samba'nın sistemdeki dosya isimlerini çevirirken dikkate aldığı bu yeni "
-"seçenekle kullanılmasını istediğiniz karakter setini girin."
-
-#. Description
-#: ../samba-common.templates:3
-msgid "If you leave this option blank, your smb.conf will not be changed."
-msgstr "Bu seçeneği boş bırakırsanız, smb.conf dosyanız değiştirilmeyecektir."
-
-#. Description
-#: ../samba-common.templates:13
-msgid "Character Set for DOS clients"
-msgstr "DOS istemcileri için karakter seti"
-
-#. Description
-#: ../samba-common.templates:13
-msgid ""
-"You currently have a \"client code page\" set in your smb.conf.  In Samba "
-"3.0, this option is replaced by the option \"dos charset\".  Please specify "
-"the character set you wish to use for this new option.  In most cases, the "
-"default chosen for you will be sufficient.  Note that this option is not "
-"needed to support Windows clients, it is only for DOS clients.  If you leave "
-"this option blank, your smb.conf will not be changed."
-msgstr ""
-"Halihazırda smb.conf yapılandırma dosyanızda \"client code page\" ayarı mevcut.  "
-"Samba 3.0'da bu seçenek \"dos charset\" seçeneğiyle değiştirildi.  Lütfen bu yeni "
-"seçenekle beraber kullanmak için bir karakter seti seçin.  Çoğu durumda öntanımlı "
-"olarak seçilmiş bulunan seçenek uygundur.  Aklınızda bulunsun bu seçenek Windows "
-"istemcilerini desteklemek için gerekli değildir, sadece DOS istemcileri içindir.  "
-"Eğer bu seçeneği boş bırakırsanız smb.conf dosyanız değiştirilmeyecektir."
-
-#. Description
-#: ../samba-common.templates:24
-msgid "Modify smb.conf to use WINS settings from DHCP?"
-msgstr ""
-"WINS ayarlarını DHCP'den kullanmak için smb.conf dosyasında değişiklik yapılsın mı?"
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"If your computer gets IP address information from a DHCP server on the "
-"network, the DHCP server may also provide information about WINS servers "
-"(\"NetBIOS name servers\") present on the network.  This requires a change "
-"to your smb.conf file so that DHCP-provided WINS settings will automatically "
-"be read from /etc/samba/dhcp.conf."
-msgstr ""
-"Eğer bilgisayarınız IP adresini ağınızdaki bir DHCP sunucusundan alıyorsa, "
-"DHCP sunucusu ayrıca ağınızda bulunan WINS sunucuları (\"NetBIOS alanadı "
-"sunucuları\") hakkında da bilgi verebilir.  Bu, smb.conf dosyanızda DHCP "
-"tarafından sunulan WINS ayarlarının otomatik olarak /etc/samba/dhcp.conf "
-"dosyasından okunmasını sağlayan bir değişikliği gerektirir."
-
-#. Description
-#: ../samba-common.templates:24
-msgid ""
-"You must have the dhcp3-client package installed to take advantage of this "
-"feature."
-msgstr ""
-"Bu özellikten yararlanabilmek için dhcp3-client paketinin kurulmuş olması gerekir."
-
-#. Description
-#: ../samba-common.templates:37
-msgid "Configure smb.conf through debconf?"
-msgstr "\"smb.conf\" dosyası debconf ile yapılandırılsın mı?"
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"The rest of the configuration of Samba deals with questions that affect "
-"parameters in /etc/samba/smb.conf, which is the file used to configure the "
-"Samba programs (nmbd and smbd.) Your current smb.conf contains an 'include' "
-"line or an option that spans multiple lines, which could confuse debconf and "
-"require you to edit your smb.conf by hand to get it working again."
-msgstr ""
-"Geri kalan Samba yapılandırması Samba uygulamalarını (nmbd ve smbd) yapılandırmak "
-"için kullanılan /etc/samba/smb.conf dosyasındaki parametreleri etkileyen sorularla "
-"devam edecektir. Mevcut smb.conf dosyası, debconf'u şaşırtabilecek ve smb.conf "
-"dosyanızı elle değiştirilmesi zorunda kılacak bir 'include' satırı veya birden "
-"fazla satır boyunca devam eden bir seçenek içeriyor."
-
-#. Description
-#: ../samba-common.templates:37
-msgid ""
-"If you don't use debconf to configure smb.conf, you will have to handle any "
-"configuration changes yourself, and will not be able to take advantage of "
-"periodic configuration enhancements.  Therefore, use of debconf is "
-"recommended if possible."
-msgstr ""
-"Eğer smb.conf'u yapılandırmak için debconf'u kullanmıyorsanız bütün yapılandırma "
-"değişikliklerini kendiniz elle yapmanız gerekir.  Bu durumda periyodik olarak "
-"sunulan yapılandırma iyileştirmelerinden de yararlanamayacaksınız.  Bu nedenlerle "
-"eğer mümkünse debconf kullanımı tavsiye edilir."
-
-#. Description
-#: ../samba-common.templates:52
-msgid "Workgroup/Domain Name?"
-msgstr "Çalışma Grubu/Etki Alanı İsmi?"
-
-#. Description
-#: ../samba-common.templates:52
-msgid ""
-"This controls what workgroup your server will appear to be in when queried "
-"by clients. Note that this parameter also controls the Domain name used with "
-"the security=domain setting."
-msgstr ""
-"Bu ayar, sunucunuzun istemciler tarafından sorgulandığında hangi Çalışma Grubu "
-"içerisinde gözükeceğini kontrol eder. Aklınızda bulunsun, bu parametre ayrıca "
-"security=domain ayarı ile beraber kullanılacak Etki Alanını da kontrol eder."
-
-#. Description
-#: ../samba-common.templates:60
-msgid "Use password encryption?"
-msgstr "Parola şifrelenmesi kullanılsın mı?"
-
-#. Description
-#: ../samba-common.templates:60
-msgid ""
-"Recent Windows clients communicate with SMB servers using encrypted "
-"passwords. If you want to use clear text passwords you will need to change a "
-"parameter in your Windows registry. It is recommended that you use encrypted "
-"passwords. If you do, make sure you have a valid /etc/samba/smbpasswd file "
-"and that you set passwords in there for each user using the smbpasswd "
-"command."
-msgstr ""
-"Yeni Windows istemcileri SBM sunucularıyla şifrelenmiş parolalar kullanarak "
-"iletişim kurarlar. Eğer düz metin parolaları kullanmak istiyorsanız Windows "
-"registry içinde bir parametreyi değiştirmelisiniz. Eğer bu işlemi yapmışsanız, "
-"geçerli bir /etc/samba/smbpasswd dosyanız olduğundan ve buraya smbpasswd "
-"komutu kullanarak bütün kullanıcılar için parola kaydı eklendiğinden emin olun."
-
-#. Description
-#: ../samba.templates:4
-msgid "Create samba password database, /var/lib/samba/passdb.tdb?"
-msgstr "Samba parola veritabanı /var/lib/samba/passwd.tdb yaratılsın mı?"
-
-#. Description
-#: ../samba.templates:4
-msgid ""
-"To be compatible with the defaults in most versions of Windows, Samba must "
-"be configured to use encrypted passwords.  This requires user passwords to "
-"be stored in a file separate from /etc/passwd. This file can be created "
-"automatically, but the passwords must be added manually (by you or the user) "
-"by running smbpasswd, and you must arrange to keep it up-to-date in the "
-"future.  If you do not create it, you will have to reconfigure samba (and "
-"probably your client machines) to use plaintext passwords. See /usr/share/"
-"doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc package for more "
-"details."
-msgstr ""
-"Windows'un çoğu sürümüyle uyumlu olması için, Samba'nın şifreli parolaları "
-"kullanmak üzere yapılandırılması gerekir.  Bu işlem kullanıcı parolalarının "
-"/etc/passwd dosyasından farklı bir yerde saklanmasını gerektirir. Bu dosya "
-"otomatik olarak yaratılabilir, fakat parolaların (siz veya kullanıcı tarafından) "
-"smbpasswd çalıştırılarak elle girilmesi ve gelecekte de güncel tutulması gerekir.  "
-"Eğer bunu yaratmazsanız, düz metin parolalar kullanabilmek için samba'yı (ve "
-"muhtemelen istemci makineleri) yeniden yapılandırmanız gerekir. Daha ayrıntılı "
-"bilgi için samba-doc paketinden çıkan /usr/share/doc/samba-doc/htmldocs/"
-"ENCRYPTION.html'ye başvurun."
-
-#. Description
-#: ../samba.templates:17
-msgid "Samba's log files have moved."
-msgstr "Samba'nın günce dosyaları taşındı."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"Starting with the first packages of Samba 2.2 for Debian the log files for "
-"both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The "
-"names of the files are log.nmbd and log.smbd, for nmbd and smbd respectively."
-msgstr ""
-"Samba 2.2'nin ilk paketlerinden itibaren, Samba artalan süreçlerine (nmbd ve "
-"smbd) ait Debian günce dosyaları artık /var/log/samba altında saklanıyor. Bu "
-"dosyaların isimleri nmbd ve smbd için sırasıyla log.nmbd ve log.smbd'dir."
-
-#. Description
-#: ../samba.templates:17
-msgid ""
-"The old log files that were in /var/log/ will be moved to the new location "
-"for you."
-msgstr ""
-"/var/log/ içinde bulunan eski günce dosyaları yeni bir konuma taşınacak."
-
-#. Description
-#: ../samba.templates:28
-msgid "Running nmbd from inetd is no longer supported"
-msgstr "Nmbd'nin inetd'den çalıştırılması artık desteklenmiyor"
-
-#. Description
-#: ../samba.templates:28
-msgid ""
-"Your system was previously configured to start nmbd and smbd from inetd.  As "
-"of version 2.999+3.0.alpha20-4, nmbd will no longer be started from inetd.  "
-"If you have modified your /etc/init.d/samba startup script, you may need to "
-"adjust it by hand now so that nmbd will start."
-msgstr ""
-"Sisteminiz, nmbd ve smbd'yi inetd üzerinden çalıştıracak şekilde ayarlanmış.  "
-"Sürüm 2.999+3.0.alpha20-4'ten sonra artık nmbd inetd'den çalıştırılmıyor.  "
-"Eğer /etc/init.d/samba başlangıç betiğini kendiniz düzenlediyseniz, nmbd'nin "
-"çalışabilmesi için bu dosyayı elle ayarlamak zorunda kalabilirsiniz."
-
-#. Choices
-#: ../samba.templates:36
-msgid "daemons, inetd"
-msgstr "artalan süreçleri, inetd"
-
-#. Description
-#: ../samba.templates:38
-msgid "How do you want to run Samba?"
-msgstr "Samba'nın nasıl çalışmasını istersiniz?"
-
-#. Description
-#: ../samba.templates:38
-msgid ""
-"The Samba daemon smbd can run as a normal daemon or from inetd. Running as a "
-"daemon is the recommended approach."
-msgstr ""
-"Samba artalan süreci smbd, normal bir artalan süreci olarak veya inetd'den "
-"çalışabilir. Tavsiye edilen yaklaşım artalan süreci olarak çalıştırmaktır."
-
-#. Description
-#: ../samba.templates:45
-msgid "Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?"
-msgstr "/etc/samba/smbpasswd /var/lib/samba/passwd.tdb'ye taşınsın mı?"
-
-#. Description
-#: ../samba.templates:45
-msgid ""
-"Samba 3.0 introduces a newer, more complete SAM database interface which "
-"supersedes the /etc/samba/smbpasswd file.  Would you like your existing "
-"smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you "
-"plan to use another pdb backend (e.g., LDAP) instead, you should answer 'no' "
-"here."
-msgstr ""
-"Samba 3.0, /etc/samba/smbpasswd'nin yerini alan yeni ve daha eksiksiz bir SAM "
-"veritabanı arayüzü ile birlikte geliyor. Mevcut smbpasswd dosyasının /var/lib/"
-"samba/passdb.tbd dosyasına dönüştürülmesini ister misiniz?  Eğer başka bir pdb "
-"arkayüzü (ör. LDAP) kullanmayı planlıyorsanız, burada 'hayır' cevabını vermelisiniz."
-
-#. Description
-#: ../swat.templates:3
-msgid "Your smb.conf will be re-written!"
-msgstr "Smb.conf dosyanız tekrar yazılacak!"
-
-#. Description
-#: ../swat.templates:3
-msgid ""
-"SWAT will rewrite your smb.conf file. It will rearrange the entries and "
-"delete all comments, include= and copy= options. If you have a carefully "
-"crafted smb.conf then back it up or don't use SWAT!"
-msgstr ""
-"SWAT smb.conf dosyanızın üzerine yazacak. Bu işlem kayıtları tekrar düzenleyecek, "
-"bütün yorumları, include= ve copy= seçeneklerini silecek. Eğer özel olarak "
-"tasarladığınız bir smb.conf dosyanız varsa, bunu yedekleyin veya SWAT kullanmayın!"

packaging/Debian/debian-sarge/python2.3-samba.files

@@ -1 +0,0 @@
-usr/lib/python2.3/site-packages/

packaging/Debian/debian-sarge/rules

@@ -1,358 +0,0 @@
-#!/usr/bin/make -f
-# 
-# Important modifications (introduction of a saved config.cache to
-#	solve build problems) introduced in Samba 2.2.1a-5. These
-#	modification were made by Steve Langasek <vorlon@netexpress.net>.
-#
-#	config.cache *DISABLED* to solve problems caused incorrect settings
-#	--SSS
-#
-#
-
-# Uncomment this to turn on verbose mode. 
-#export DH_VERBOSE=1
-
-# This is the debhelper compatability version to use.
-export DH_COMPAT=4
-
-# This has to be exported to make some magic below work.
-export DH_OPTIONS
-
-# Set the host and build architectures for use with config.cache loading,
-# cross-building, etc.
-DEB_HOST_GNU_TYPE	:= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE	:= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-DEB_HOST_GNU_SYSTEM	:= $(shell dpkg-architecture -qDEB_HOST_GNU_SYSTEM)
-DEB_BUILD_GNU_SYSTEM	:= $(shell dpkg-architecture -qDEB_BUILD_GNU_SYSTEM)
-
-export DEB_HOST_GNU_TYPE
-export DEB_BUILD_GNU_TYPE
-export DEB_HOST_GNU_SYSTEM
-export DEB_BUILD_GNU_SYSTEM
-
-# Support the DEB_BUILD_OPTIONS variable
-CFLAGS = -gstabs -Wall
-INSTALL = install
-
-ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-  CFLAGS += -O0
-else
-  CFLAGS += -O2
-endif
-
-ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
-  INSTALL += -s
-endif
-
-
-DESTDIR=`pwd`/debian/tmp
-
-conf_args = \
-		--with-fhs \
-		--enable-shared \
-		--enable-static \
-		--prefix=/usr \
-		--sysconfdir=/etc \
-		--libdir=/etc/samba \
-		--with-privatedir=/etc/samba \
-		--with-piddir=/var/run/samba \
-		--localstatedir=/var \
-		--with-netatalk \
-		--with-pam \
-		--with-syslog \
-		--with-utmp \
-		--with-readline \
-		--with-pam_smbpass \
-		--with-libsmbclient \
-		--with-winbind \
-		--with-msdfs \
-		--with-automount \
-		--with-tdbsam \
-		--with-ldap \
-		--with-shared-modules=idmap_ad,idmap_rid \
-		--with-python=python2.3
-
-ifeq ($(DEB_HOST_GNU_SYSTEM),linux)
-  conf_args += \
-		--with-smbmount \
-		--with-acl-support \
-		--with-quotas \
-		--with-cifsmount
-  mount_cifs	= yes
-  smbfs		= yes
-else
-  conf_args +=	--without-quotas
-  mount_cifs	= no
-  smbfs		= no
-endif
-
-ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
-  conf_args += --build $(DEB_HOST_GNU_TYPE)
-else
-  conf_args += --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE)
-endif
-
-patch: patch-stamp
-patch-stamp:
-	dh_testdir
-	if [ ! -f patch-stamp ]; then /bin/sh debian/scripts/patch-source; fi
-	touch patch-stamp
-
-unpatch:
-	dh_testdir
-	if [ -f patch-stamp ]; then /bin/sh debian/scripts/unpatch-source; fi
-	rm -f patch-stamp
-
-configure: patch-stamp configure-stamp
-configure-stamp:
-	dh_testdir
-
-#	if [ -f debian/config.cache ]; then \
-#		cp -f debian/config.cache source/config.cache; \
-#	fi
-
-	[ -f source/Makefile ] || (cd source && CFLAGS="$(CFLAGS)" ./configure $(conf_args))
-
-	touch configure-stamp
-
-build: patch-stamp configure-stamp build-stamp
-build-stamp:
-	dh_testdir
-
-	$(MAKE) -C source headers
-	$(MAKE) -C source all nsswitch/libnss_wins.so python_ext
-
-	touch build-stamp
-
-clean: unpatch
-	dh_testdir
-	dh_testroot
-	rm -f build-stamp configure-stamp
-
-	# Clean first the Samba package
-#	-$(MAKE) -C source realclean
-#	-$(MAKE) -C source clean
-	-$(MAKE) -C source python_clean distclean
-
-	# Delete stuff left after a build that is not deleted by 'make clean'
-	rm -f source/bin/wbinfo source/bin/winbindd source/bin/debug2html \
-		source/bin/libsmbclient.a source/bin/mount.cifs \
-		source/include/stamp-h
-
-	sed -e "s/@libacl@/`type-handling any linux-gnu`/g" \
-		< debian/control.in > debian/control
-
-	dh_clean
-
-install: DH_OPTIONS=
-install: build
-	dh_testdir
-	dh_testroot
-	dh_clean -k
-	dh_installdirs
-
-	mkdir -p $(DESTDIR)/usr/share/man $(DESTDIR)/usr/lib/samba \
-	         $(DESTDIR)/lib/security $(DESTDIR)/sbin \
-	         $(DESTDIR)/usr/lib/cups/backend $(DESTDIR)/usr/share/samba \
-	         $(DESTDIR)/etc/pam.d $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d \
-	         $(DESTDIR)/usr/lib/python2.3/site-packages/samba
-
-	# Add here commands to install the package into debian/tmp.
-	$(MAKE) -C source install DESTDIR=$(DESTDIR)
-
-	# libsmbclient files are not installed by the standard
-	#	'make install' - do it manually.
-	$(MAKE) -C source installclientlib DESTDIR=$(DESTDIR)
-	mv $(DESTDIR)/usr/lib/samba/libsmbclient.so $(DESTDIR)/usr/lib/samba/libsmbclient.so.0.1
-	ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/samba/libsmbclient.so.0
-	ln -s libsmbclient.so.0.1 $(DESTDIR)/usr/lib/samba/libsmbclient.so
-
-	# Starting with Samba 3.0.6 libsmbclient.so is installed in
-	# /usr/lib/samba. We don't want it there since it is not in the
-	# default library path. Here we move it to /usr/lib/.
-	mv $(DESTDIR)/usr/lib/samba/libsmbclient* \
-		$(DESTDIR)/usr/lib/
-
-	# Install other stuff not installed by "make install"
-	install -m 0755 debian/mksmbpasswd.awk $(DESTDIR)/usr/sbin/mksmbpasswd
-
-	# Install winbind stuff not installed by 'make install'
-	install -m 0644 source/bin/pam_winbind.so $(DESTDIR)/lib/security/
-	install -m 0644 source/nsswitch/libnss_winbind.so $(DESTDIR)/lib/libnss_winbind.so.2
-
-	# Install libnss_wins.so, which is not installed by 'make install' either.
-	install -m 0644 source/nsswitch/libnss_wins.so  $(DESTDIR)/lib/libnss_wins.so.2
-
-	# pam_smbpass.so isn't being installed by 'make install'.
-	#	We'll move it here to $(DESTDIR)/lib/security/ and then
-	#	libpam-smbpass.files will make dh_movefiles move it to the
-	#	right location in the libpam-smbpass package.
-	install -m 0644 source/bin/pam_smbpass.so $(DESTDIR)/lib/security/
-
-ifeq ($(smbfs),yes)
-	# Create the symlinks that will allow us to do "mount -t smbfs ..."
-	# and "mount -t smb ...". Note that the source/script/installbin.sh
-	# tries to create the first symlink, but we have commented
-	# that code out and do everything here. We also create
-	# symlinks for the man pages.
-	ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smbfs
-	ln -s /usr/bin/smbmount $(DESTDIR)/sbin/mount.smb
-	ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smb.8
-	ln -s smbmount.8 $(DESTDIR)/usr/share/man/man8/mount.smbfs.8
-endif
-
-ifeq ($(mount_cifs),yes)
-	# Install mount.cifs and its man page
-	install -m 04755 source/bin/mount.cifs $(DESTDIR)/sbin/
-	install -m 0644 docs/manpages/mount.cifs.8 $(DESTDIR)/usr/share/man/man8/
-endif
-
-	# For CUPS to support printing to samba printers, it's necessary
-	#	to make the following symlink (according to
-	#	Erich Schubert <debian@vitavonni.de> in #109509):
-	ln -s ../../../bin/smbspool $(DESTDIR)/usr/lib/cups/backend/smb
-
-	# Install man pages for files without man pages in the upstream sources
-	install -m 0644 debian/mksmbpasswd.8 $(DESTDIR)/usr/share/man/man8/mksmbpasswd.8
-
-	# We don't provide the "Using Samba" book in the swat package.
-	# It's provided in the samba-doc package so in the swat package
-	# we just provide a symlink to the real book.
-	ln -s ../../doc/samba-doc/htmldocs/using_samba \
-	      $(DESTDIR)/usr/share/samba/swat/using_samba
-
-	# Delete unwanted stuff leftover from "make install"
-
-	# The smbwrapper package is not being generated anymore, so we must
-	#	delete the related man pages.
-	# rm $(DESTDIR)/usr/share/man/man1/smbsh.1
-
-	# We're not providing findsmb (should we?) so let's remove the man
-	#	pages.
-	find debian/ -name 'findsmb*' -exec rm -f {} \;
-
-	# Install samba-common's conffiles - they'll get moved later to their
-	#	correct place by dh_movefiles.
-	cp debian/smb.conf $(DESTDIR)/usr/share/samba/
-	install -m755 debian/panic-action $(DESTDIR)/usr/share/samba/
-	cp debian/gdbcommands $(DESTDIR)/etc/samba/
-	cp debian/samba.pamd $(DESTDIR)/etc/pam.d/samba
-	install -m755 debian/samba-common.dhcp $(DESTDIR)/etc/dhcp3/dhclient-enter-hooks.d/samba
-
-	# Install the Python modules
-	#
-	# Hmmm... need to figure this out. We have lib.linux-i686-2.2
-	# and lib.linux-i686-2.3 directories. Using only the stuff from
-	# the 2.3 directory for now. peloy.-
-	#cp source/build/lib.*/samba/*.so $(DESTDIR)/usr/lib/python2.3/site-packages/
-	cp source/build/lib.*-*-2.3/samba/*.so $(DESTDIR)/usr/lib/python2.3/site-packages/samba/
-	cp source/python/samba/* $(DESTDIR)/usr/lib/python2.3/site-packages/samba/
-
-	dh_movefiles
-
-# Build architecture-independent files here.
-# Pass -i to all debhelper commands in this target to reduce clutter.
-binary-indep: DH_OPTIONS=-i
-binary-indep: build install
-	dh_testdir
-	dh_testroot
-	dh_installdebconf
-	dh_installdocs -A debian/README.build
-	# dh_installexamples is not available in Debian Potato...
-	[ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -psamba-doc examples/*
-#	dh_installmenu
-#	dh_installemacsen
-#	dh_installpam
-#	dh_installinit
-#	dh_installcron
-#	dh_installmanpages
-#	dh_installinfo
-#	dh_undocumented
-	dh_installchangelogs
-	dh_link
-	dh_compress
-	dh_fixperms
-
-	# Get rid of those pesky .cvsignore files to make lintian happy
-	find debian/ -name .cvsignore -exec rm -f {} \;
-
-	dh_installdeb
-#	dh_perl
-	dh_gencontrol
-	dh_md5sums
-	dh_builddeb
-
-# Build architecture-dependent files here.
-# Pass -a to all debhelper commands in this target to reduce clutter.
-ifeq ($(smbfs),no)
-  DH_EXTRAS=-Nsmbfs
-endif
-
-binary-arch: DH_OPTIONS=-a $(DH_EXTRAS)
-binary-arch: build install
-	dh_testdir
-	dh_testroot
-	dh_installdebconf
-	dh_installdocs -A debian/README.build
-	# dh_installexamples is not available in Debian Potato...
-	[ -x /usr/bin/dh_installexamples ] && DH_OPTIONS= dh_installexamples -v -ppython2.3-samba source/python/examples/*
-#	dh_installmenu
-	# dh_installlogrotate is not available in Debian Potato...
-	if [ -x /usr/bin/dh_installlogrotate ]; then \
-		dh_installlogrotate; \
-	else \
-		mkdir -p debian/samba/etc/logrotate.d; \
-		cp debian/samba.logrotate debian/samba/etc/logrotate.d/samba; \
-		mkdir -p debian/winbind/etc/logrotate.d; \
-		cp debian/winbind.logrotate debian/winbind/etc/logrotate.d/winbind; \
-	fi
-#	dh_installemacsen
-#	dh_installpam
-	DH_OPTIONS= dh_installinit -psamba -- "defaults 20 19"
-	DH_OPTIONS= dh_installinit -pwinbind
-	dh_installcron 
-#	dh_installmanpages
-#	dh_installinfo
-	cp debian/winbind.lintian debian/winbind/usr/share/lintian/overrides/winbind
-#	dh_undocumented
-	dh_installchangelogs -Nlibpam-smbpass
-	DH_OPTIONS= dh_installchangelogs -plibpam-smbpass source/pam_smbpass/CHANGELOG
-	dh_strip --dbg-package=samba --dbg-package=smbclient
-	cp -a debian/smbclient-dbg/* debian/samba-dbg
-	rm -rf debian/smbclient-dbg
-	dh_link
-	dh_compress
-	dh_fixperms
-
-	# Why this is executable, I have NO idea...
-	chmod a-x debian/libsmbclient-dev/usr/include/libsmbclient.h
-
-ifeq ($(smbfs),yes)
-	# You may want to make some executables suid here.
-	# The smbmnt and smbumount binaries should be setuid-root. This
-	#	has security implications because these programs haven't had
-	#	a thorough security audit. smbmount _does not_ have to have
-	#	the setuid bit set. In fact, it is a security hole.
-	chmod u+s debian/smbfs/usr/bin/smbmnt
-	chmod u+s debian/smbfs/usr/bin/smbumount
-endif
-
-	# Set some reasonable default perms for the samba logdir.
-	chmod 0750 debian/samba/var/log/samba/
-	chown root.adm debian/samba/var/log/samba/
-
-	# Get rid of those pesky .cvsignore files to make lintian happy
-	# (maybe we only need the "find ... -exec rm -f {} ;" we have
-	# in the binary-indep target?) peloy.-
-	find debian/ -name .cvsignore -exec rm -f {} \;
-
-	dh_installdeb
-#	dh_makeshlibs
-#	dh_perl
-	dh_shlibdeps
-	dh_gencontrol
-	dh_md5sums
-	dh_builddeb
-
-binary: binary-indep binary-arch
-.PHONY: build clean binary-indep binary-arch binary install configure

packaging/Debian/debian-sarge/samba-common.config

@@ -1,154 +0,0 @@
-#/bin/sh -e
-
-# Source debconf library.
-. /usr/share/debconf/confmodule
-
-# Function for grabbing a parameter from an smb.conf file
-smbconf_retr() {
-	if [ -z "$1" ]; then
-		return
-	fi
-
-	if [ -n "$2" ]; then
-		local FILE="$2"
-	fi
-
-	if [ -z "$FILE" ]; then
-		return
-	fi
-
-	sed -n -e"
-		s/^[[:space:]]*\[global\]/\[global\]/i
-		/^\[global\]/,/^[[:space:]]*\[/ {
-			s/^[[:space:]]*$1[[:space:]]*=[[:space:]]*//pi
-		}" $FILE \
-	| tail -n 1
-}
-
-FILE=/etc/samba/smb.conf
-
-db_title "Samba Server"
-
-# We ask the question IFF the config contains complex options that could
-# cause us to break the config.
-if [ -f "$FILE" ] && grep -v dhcp.conf $FILE \
-                     | grep -qEi '\\$|^[[:space:]]*include[[:space:]]*='
-then
-	db_input high samba-common/do_debconf || true
-	db_go
-else
-	db_set samba-common/do_debconf true
-fi
-
-# If user doesn't want to use debconf to configure Samba the leave...
-db_get samba-common/do_debconf || true
-if [ "${RET}" = "false" ]; then
-	exit 0
-fi
-
-# User wants to use debconf, let's continue...
-
-# Adjust priority of the question about the workgroup name depending
-# on whether a workgroup name has already being specified.
-db_get samba-common/workgroup || true
-if [ "${RET}" ]; then
-	WGPRIORITY=medium
-else
-	WGPRIORITY=high
-fi
-
-# Preload any values from the existing smb.conf file
-if [ -f $FILE ]; then
-	WORKGROUP=`smbconf_retr workgroup`
-	if [ "$WORKGROUP" ]; then
-		db_set samba-common/workgroup "$WORKGROUP"
-	fi
-
-	ENCRYPT=`smbconf_retr "encrypt passwords"`
-	if [ "$ENCRYPT" ]; then
-		ENCRYPT=`echo $ENCRYPT | tr '[A-Z]' '[a-z]'`
-		if [ "$ENCRYPT" = "yes" ]; then
-			ENCRYPT=true
-		elif [ "$ENCRYPT" = "no" ]; then
-			ENCRYPT=false
-		fi
-
-		db_set samba-common/encrypt_passwords "$ENCRYPT"
-	fi
-
-	CHARSET=`smbconf_retr "character set"`
-	CODEPAGE=`smbconf_retr "client code page"`
-	UNIXCHARSET=`smbconf_retr "unix charset"`
-	DOSCHARSET=`smbconf_retr "dos charset"`
-
-	# If we're upgrading from an old version and there's no
-	# 'passdb backend' setting, add one.
-	if [ "$1" = "configure" -a -n "$2" ] \
-	   && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2 \
-	   && ! grep -q -i '^[[:space:]]*passdb backend[[:space:]]*=' $FILE
-	then
-		TMPFILE=/etc/samba/smb.conf.dpkg-tmp
-		sed -e'
-			s/^\([[:space:]]*\)\[global\]/\1\[global\]/i
-			s/^\([[:space:]]*\)encrypt passwords/\1encrypt passwords/i
-			/^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ {
-				/^[[:space:]]*encrypt passwords[[:space:]]*=/a \
-   passdb backend = smbpasswd guest
-			}' < $FILE > ${TMPFILE}
-		chmod a+r ${TMPFILE}
-		mv -f ${TMPFILE} /etc/samba/smb.conf
-	fi
-fi
-
-# Get workgroup name
-db_input $WGPRIORITY samba-common/workgroup || true
-db_go
-
-# Use encrypted passwords?
-db_input medium samba-common/encrypt_passwords || true
-db_go
-
-# Handle migrating character sets
-if [ -n "$CHARSET" -a -z "$UNIXCHARSET" ]
-then
-	UNIXCHARSET=`echo $CHARSET | sed -e's/iso-/ISO/i'`
-	db_set samba-common/character_set "$UNIXCHARSET"
-	# FIXME: should eventually be low.
-	db_input medium samba-common/character_set || true
-	db_go
-fi
-
-if [ -n "$CODEPAGE" -a -z "$DOSCHARSET" ]
-then
-	DOSCHARSET=CP`echo $CODEPAGE | sed -e's/[[:alpha:]]*//g'`
-	db_set samba-common/codepage "$DOSCHARSET"
-	# FIXME: should eventually be low.
-	db_input medium samba-common/codepage || true
-	db_go
-fi
-
-DHCPPRIORITY=medium
-#if [ "$DEBCONF_RECONFIGURE" = 1 ] && [ -f /sbin/dhclient3 ]
-if [ -f /sbin/dhclient3 ]
-then
-	DHCPPRIORITY=high
-# TODO: see if we can detect that dhcp3-client is *going* to be installed,
-# even if it isn't yet.
-#elif dpkg-query -W --showformat='${Status}\n' dhcp3-client | grep ???
-# unknown ok not-installed ? 
-#	DHCPPRIORITY=high
-fi
-
-if [ ! -f $FILE ] || grep -q -i 'wins server' $FILE
-then
-	# check the values before and after; unset the 'applied' flag
-	# if they don't match.
-	db_get samba-common/dhcp || true
-	OLDDHCP="$RET"
-	db_input $DHCPPRIORITY samba-common/dhcp || true
-	db_go
-	db_get samba-common/dhcp || true
-	if [ "$OLDDHCP" != "$RET" ]; then
-		db_fset samba-common/dhcp applied false
-	fi
-fi

packaging/Debian/debian-sarge/samba-common.dhcp

@@ -1,57 +0,0 @@
-#!/bin/sh
-
-SAMBA_DHCP_CONF=/etc/samba/dhcp.conf
-
-netbios_setup() {
-	# No need to continue if we're called with an unsupported option
-
-	if [ "$reason" != BOUND ] && [ "$reason" != RENEW ] \
-	   && [ "$reason" != REBIND ] && [ "$reason" != REBOOT ] \
-	   && [ "$reason" != EXPIRE ] && [ "$reason" != FAIL ]
-	then
-		return
-	fi
-
-	# Nor should we continue if no settings have changed
-	if [ "$new_netbios_name_servers" = "$old_netbios_name_servers" ] \
-	   && [ "$new_netbios_scope" = "$old_netbios_scope" ]
-	then
-		return
-	fi
-
-	# reparse our own file
-	local other_servers=`sed -n -e"s/[[:space:]]$interface:[^[:space:]]*//g; \
-		s/^[[:space:]]*wins server[[:space:]]*=[[:space:]]*//pi" \
-		$SAMBA_DHCP_CONF`
-
-	umask 022
-
-	local serverlist="$other_servers"
-	for server in $new_netbios_name_servers
-	do
-		serverlist="$serverlist $interface:$server"
-	done
-
-	echo -n > $SAMBA_DHCP_CONF
-
-	# If we're updating on failure/expire, AND there are no WINS
-	# servers for other interfaces, leave the file empty.
-	if [ -z "$other_servers" ]
-	then
-		if [ "$reason" = FAIL ] || [ "$reason" = EXPIRE ]
-		then
-			return
-		fi
-	fi
-
-	if [ -n "$serverlist" ]
-	then
-		echo "   wins server =$serverlist" >> $SAMBA_DHCP_CONF
-	fi
-	if [ -n "$new_netbios_scope" ]
-	then
-		echo "   netbios scope = $new_netbios_scope" >> $SAMBA_DHCP_CONF
-	fi
-}
-
-netbios_setup

packaging/Debian/debian-sarge/samba-common.dirs

@@ -1,2 +0,0 @@
-etc/samba
-etc/dhcp3/dhclient-enter-hooks.d

packaging/Debian/debian-sarge/samba-common.files

@@ -1,21 +0,0 @@
-etc/samba/
-etc/dhcp3/
-etc/pam.d/
-usr/bin/net
-usr/bin/nmblookup
-usr/bin/smbpasswd
-usr/bin/testparm
-usr/bin/profiles
-usr/share/man/man1/nmblookup.1
-usr/share/man/man1/testparm.1
-usr/share/man/man1/profiles.1
-usr/share/man/man5/lmhosts.5
-usr/share/man/man5/smb.conf.5
-usr/share/man/man7/samba.7
-usr/share/man/man8/net.8
-usr/share/man/man8/smbpasswd.8
-usr/share/samba/lowcase.dat
-usr/share/samba/panic-action
-usr/share/samba/smb.conf
-usr/share/samba/upcase.dat
-usr/share/samba/valid.dat

packaging/Debian/debian-sarge/samba-common.postinst

@@ -1,139 +0,0 @@
-#!/bin/sh
-#
-#
-
-set -e
-
-# Do debconf stuff here
-. /usr/share/debconf/confmodule
-
-# We need a default smb.conf file. If one doesn't exist we put in place
-#	one that has some basic defaults.
-if [ ! -e /etc/samba/smb.conf ]; then
-	cp -a /usr/share/samba/smb.conf /etc/samba/
-fi
-
-# Static tempfile location, dpkg-style
-TMPFILE=/etc/samba/smb.conf.dpkg-tmp
-
-# ------------------------- Debconf questions start ---------------------
-
-# Is the user configuring with debconf, or he/she prefers swat/manual
-#	config?
-db_get samba-common/do_debconf || true
-if [ "${RET}" = "true" ]; then
-	# Get workgroup name
-	db_get samba-common/workgroup || true
-	WORKGROUP="${RET}"
-
-	# Oh my GOD, this is ugly.  Why would anyone put these
-	# characters in a workgroup name?  Why, Lord, why???
-	WORKGROUP=`echo $WORKGROUP | \
-	           sed -e's/\\\\/\\\\\\\\/g
-	                  s#/#\\\\/#g
-	                  s/&/\\\&/g
-	                  s/\\\$/\\\\\\\$/g'`
-
-	sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i
-		/^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \
-			s/^\([[:space:]]*\)workgroup[[:space:]]*=.*/\1workgroup = ${WORKGROUP}/i" \
-		< /etc/samba/smb.conf >${TMPFILE}
-	mv -f ${TMPFILE} /etc/samba/smb.conf
-
-	# Encrypt passwords?
-	db_get samba-common/encrypt_passwords || true
-	ENCRYPT_PASSWORDS="${RET}"
-
-	sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i
-		/^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \
-		        s/^\([[:space:]]*\)encrypt passwords[[:space:]]*=.*/\1encrypt passwords = ${ENCRYPT_PASSWORDS}/i" \
-		< /etc/samba/smb.conf >${TMPFILE}
-	mv -f ${TMPFILE} /etc/samba/smb.conf
-
-	# Install DHCP support
-	db_get samba-common/dhcp && DHCPVAL="$RET"
-	db_fget samba-common/dhcp applied || true
-	if [ "$DHCPVAL" = true ] && [ "$RET" != true ] && \
-	   ! grep -q dhcp.conf /etc/samba/smb.conf
-	then
-		sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i
-			/^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ {
-				/wins server[[:space:]]*=/a \\
-\\
-# If we receive WINS server info from DHCP, override the options above. \\
-   include = /etc/samba/dhcp.conf
-}" < /etc/samba/smb.conf > ${TMPFILE}
-		mv -f ${TMPFILE} /etc/samba/smb.conf
-	elif [ "$RET" != true ] && grep -q dhcp.conf /etc/samba/smb.conf
-	then
-		:
-		# FIXME: here we /delete/ the lines?
-	fi
-	# Once we get here, the config has been applied, whatever
-	# it is.
-	if [ "$RET" != true ]; then
-		db_fset samba-common/dhcp applied true
-	fi
-
-	# Update charset settings?
-	if ! grep -q "^[[:space:]]*unix charset[[:space:]]*=" /etc/samba/smb.conf
-	then
-		db_get samba-common/character_set || true
-		UNIXCHARSET="${RET}"
-		if [ -n "$UNIXCHARSET" ]
-		then
-			sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i
-				s/^\([[:space:]]*\)character set/\1character set/i
-				/^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ {
-					/^[[:space:]]*character set[[:space:]]*=/c \\
-   unix charset = $UNIXCHARSET
-				}" < /etc/samba/smb.conf > ${TMPFILE}
-			mv -f ${TMPFILE} /etc/samba/smb.conf
-		fi
-	fi
-
-	if grep -qi "^[[:space:]]*passdb backend[[:space:]]*=.*unixsam" /etc/samba/smb.conf
-	then
-		sed -e 's/^\([[:space:]]*\)passdb backend/\1passdb backend/i
-			/^[[:space:]]*passdb backend/ {
-				s/unixsam/guest/i
-			}' < /etc/samba/smb.conf > ${TMPFILE}
-		mv -f ${TMPFILE} /etc/samba/smb.conf
-	fi
-
-	if ! grep -q "^[[:space:]]*dos charset[[:space:]]*=" /etc/samba/smb.conf
-	then
-		db_get samba-common/codepage || true
-		DOSCHARSET="${RET}"
-		if [ -n "$DOSCHARSET" ]
-		then
-			sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i
-				s/^\([[:space:]]*\)client code page/\1client code page/i
-				/^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ {
-					/^[[:space:]]*client code page[[:space:]]*=/c \\
-   dos charset = $DOSCHARSET
-}" < /etc/samba/smb.conf > ${TMPFILE}
-			mv -f ${TMPFILE} /etc/samba/smb.conf
-		fi
-	fi
-
-	if dpkg --compare-versions "$2" lt 2.999+3.0.alpha20-4 \
-	   && ! grep -q "^[[:space:]]*panic action[[:space:]]*=" /etc/samba/smb.conf
-	then
-		sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i
-			/^[[:space:]]*\[global\]/a \\
-\\
-# Do something sensible when Samba crashes: mail the admin a backtrace\\
-   panic action = /usr/share/samba/panic-action %d" < /etc/samba/smb.conf > ${TMPFILE}
-		mv -f ${TMPFILE} /etc/samba/smb.conf
-	fi
-
-fi
-
-chmod a+r /etc/samba/smb.conf
-
-# ------------------------- Debconf questions end ---------------------
-
-db_stop
-
-#DEBHELPER#

packaging/Debian/debian-sarge/samba-common.postrm

@@ -1,10 +0,0 @@
-#!/bin/sh
-#
-#
-
-if [ "$1" = purge ]; then
-	# Remove any files left in /etc/samba/
-	rm -Rf /etc/samba/
-fi
-
-#DEBHELPER#

packaging/Debian/debian-sarge/samba-common.templates

@@ -1,66 +0,0 @@
-Template: samba-common/character_set
-Type: string
-_Description: Character Set for Unix filesystem
- You currently have a "character set" configured in your smb.conf.  In
- Samba 3.0, this option is replaced by a new option, "unix charset".
- Please specify the character set you wish to use for theis new option,
- which controls how Samba interprets filenames on the file system.
- .
- If you leave this option blank, your smb.conf will not be changed.
-
-Template: samba-common/codepage
-Type: string
-_Description: Character Set for DOS clients
- You currently have a "client code page" set in your smb.conf.  In Samba
- 3.0, this option is replaced by the option "dos charset".  Please specify
- the character set you wish to use for this new option.  In most cases, the
- default chosen for you will be sufficient.  Note that this option is not
- needed to support Windows clients, it is only for DOS clients.  If you
- leave this option blank, your smb.conf will not be changed.
-
-Template: samba-common/dhcp
-Type: boolean
-Default: false
-_Description: Modify smb.conf to use WINS settings from DHCP?
- If your computer gets IP address information from a DHCP server on the
- network, the DHCP server may also provide information about WINS servers
- ("NetBIOS name servers") present on the network.  This requires a
- change to your smb.conf file so that DHCP-provided WINS settings will
- automatically be read from /etc/samba/dhcp.conf.
- .
- You must have the dhcp3-client package installed to take advantage of this
- feature.
-
-Template: samba-common/do_debconf
-Type: boolean
-Default: true
-_Description: Configure smb.conf through debconf?
- The rest of the configuration of Samba deals with questions that affect
- parameters in /etc/samba/smb.conf, which is the file used to configure the
- Samba programs (nmbd and smbd.) Your current smb.conf contains an
- 'include' line or an option that spans multiple lines, which could confuse
- debconf and require you to edit your smb.conf by hand to get it working
- again.
- .
- If you don't use debconf to configure smb.conf, you will have to handle
- any configuration changes yourself, and will not be able to take
- advantage of periodic configuration enhancements.  Therefore, use of
- debconf is recommended if possible.
-
-Template: samba-common/workgroup
-Type: string
-_Description: Workgroup/Domain Name?
- This controls what workgroup your server will appear to be in when queried
- by clients. Note that this parameter also controls the Domain name used
- with the security=domain setting.
-
-Template: samba-common/encrypt_passwords
-Type: boolean
-Default: true
-_Description: Use password encryption?
- Recent Windows clients communicate with SMB servers using encrypted
- passwords. If you want to use clear text passwords you will need to change
- a parameter in your Windows registry. It is recommended that you use
- encrypted passwords. If you do, make sure you have a valid
- /etc/samba/smbpasswd file and that you set passwords in there for each
- user using the smbpasswd command.

packaging/Debian/debian-sarge/samba-doc.docs

@@ -1,8 +0,0 @@
-docs/Samba3-HOWTO.pdf
-docs/Samba3-ByExample.pdf
-docs/Samba3-Developers-Guide.pdf
-docs/REVISION
-docs/THANKS
-docs/history
-docs/htmldocs/
-docs/registry/

packaging/Debian/debian-sarge/samba-doc.examples

@@ -1,2 +0,0 @@
-debian/wins2dns.awk
-source/smbadduser

packaging/Debian/debian-sarge/samba.config

@@ -1,92 +0,0 @@
-#/bin/sh -e
-#
-#
-
-# Source debconf library.
-. /usr/share/debconf/confmodule
-
-# Function for grabbing a parameter from an smb.conf file
-smbconf_retr() {
-	if [ -z "$1" ]; then
-		return
-	fi
-
-	if [ -n "$2" ]; then
-		local FILE="$2"
-	fi
-
-	if [ -z "$FILE" ]; then
-		return
-	fi
-
-	sed -n -e"
-		s/^[[:space:]]*\[global\]/\[global\]/i
-		/^\[global\]/,/^[[:space:]]*\[/ {
-			s/^[[:space:]]*$1[[:space:]]*=[[:space:]]*//pi
-		}" $FILE \
-	| tail -n 1
-}
-
-FILE=/etc/samba/smb.conf
-
-db_title "Samba Server"
-
-# Babysit users who don't read README.Debian
-if [ -n "$2" ] && dpkg --compare-versions "$2" lt "2.2"
-then
-	db_input medium samba/log_files_moved || true
-	db_go
-fi
-
-db_input medium samba/run_mode || true
-db_go
-
-
-# Offer to move the password database for existing users
-if [ "$1" = "configure" -a -n "$2" -a -e /etc/samba/smbpasswd \
-     -a ! -e /var/lib/samba/passdb.tdb ] \
-   && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2
-then
-	FILE=/etc/samba/smb.conf
-	PASSDB=""
-	if [ -f "$FILE" ]; then
-		PASSDB=`smbconf_retr "passdb backend"`
-	fi
-	TDBPRIORITY=medium
-	if echo "$PASSDB" | grep -q ldapsam; then
-		TDBPRIORITY=low
-	fi
-	db_get samba-common/do_debconf || true
-	if [ "${RET}" = "false" ]; then
-		TDBPRIORITY=low
-	fi
-
-	db_input "$TDBPRIORITY" samba/tdbsam || true
-fi
-
-# We vary the priority of the next question depending on whether
-#	the password database already exists...
-if [ -e /etc/samba/smbpasswd -o -e /var/lib/samba/passdb.tdb ]; then
-	PRIORITY="low"
-else
-	# If 'encrypt passwords' is true in smb.conf, and smbpasswd
-	# does not exist, default to yes here.
-	FILE=/etc/samba/smb.conf
-	if [ -f "$FILE" ]; then
-		ENCRYPT=`smbconf_retr "encrypt passwords"`
-	        if [ "$ENCRYPT" ]; then
-			ENCRYPT=`echo $ENCRYPT | tr '[A-Z]' '[a-z]'`
-			if [ "$ENCRYPT" = "yes" ]; then
-				ENCRYPT=true
-			fi
-			if [ "$ENCRYPT" = "no" ]; then
-				ENCRYPT=false
-			fi
-		fi
-                db_set samba/generate_smbpasswd "$ENCRYPT"
-        fi
-	PRIORITY="medium"
-fi
-
-db_input $PRIORITY samba/generate_smbpasswd || true
-db_go

packaging/Debian/debian-sarge/samba.cron.daily

@@ -1,16 +0,0 @@
-#!/bin/sh
-#
-# cron script to save a backup copy of /etc/samba/smbpasswd in /var/backups.
-#
-# Written by Eloy A. Paris <peloy@debian.org> for the Debian project.
-#
-
-BAK=/var/backups
-
-umask 022
-if cd $BAK; then
-	# Make sure /etc/samba/smbpasswd exists
-	if [ -f /etc/samba/smbpasswd ]; then
-		cmp -s smbpasswd.bak /etc/samba/smbpasswd || cp -p /etc/samba/smbpasswd smbpasswd.bak
-	fi
-fi

packaging/Debian/debian-sarge/samba.dirs

@@ -1,7 +0,0 @@
-usr/bin
-usr/sbin
-var/log/samba
-var/lib/samba/printers/W32X86
-var/lib/samba/printers/WIN40
-var/run/samba
-var/cache/samba

packaging/Debian/debian-sarge/samba.docs

@@ -1,4 +0,0 @@
-README 
-Roadmap
-WHATSNEW.txt
-docs/htmldocs/Samba3-HOWTO/diagnosis.html

packaging/Debian/debian-sarge/samba.files

@@ -1,18 +0,0 @@
-usr/bin/smbstatus
-usr/bin/smbcontrol
-usr/bin/tdbbackup
-usr/bin/pdbedit
-usr/sbin/smbd
-usr/sbin/nmbd
-usr/sbin/mksmbpasswd
-usr/lib/samba/vfs
-usr/lib/samba/idmap
-usr/share/man/man1/smbcontrol.1
-usr/share/man/man1/smbstatus.1
-usr/share/man/man5/smbpasswd.5
-usr/share/man/man8/nmbd.8
-usr/share/man/man8/pdbedit.8
-usr/share/man/man8/smbd.8
-usr/share/man/man8/mksmbpasswd.8
-usr/share/man/man8/tdbbackup.8
-

packaging/Debian/debian-sarge/samba.init

@@ -1,83 +0,0 @@
-#!/bin/sh
-#
-# Start/stops the Samba daemons (nmbd and smbd).
-#
-#
-
-# Defaults
-RUN_MODE="daemons"
-
-# Reads config file (will override defaults above)
-[ -r /etc/default/samba ] && . /etc/default/samba
-
-NMBDPID=/var/run/samba/nmbd.pid
-SMBDPID=/var/run/samba/smbd.pid
-
-# clear conflicting settings from the environment
-unset TMPDIR
-
-# See if the daemons are there
-test -x /usr/sbin/nmbd -a -x /usr/sbin/smbd || exit 0
-
-case "$1" in
-	start)
-		echo -n "Starting Samba daemons:"
-
-		echo -n " nmbd"
-		start-stop-daemon --start --quiet --exec /usr/sbin/nmbd -- -D
-
-		if [ "$RUN_MODE" != "inetd" ]; then
-			echo -n " smbd"
-			start-stop-daemon --start --quiet --exec /usr/sbin/smbd -- -D
-		fi
-
-		echo "."
-		;;
-	stop)
-		echo -n "Stopping Samba daemons: "
-
-		start-stop-daemon --stop --quiet --pidfile $NMBDPID
-		# Wait a little and remove stale PID file
-		sleep 1
-		if [ -f $NMBDPID ] && ! ps h `cat $NMBDPID` > /dev/null
-		then
-			# Stale PID file (nmbd was succesfully stopped),
-			# remove it (should be removed by nmbd itself IMHO.)
-			rm -f $NMBDPID
-		fi
-		echo -n "nmbd"
-
-		if [ "$RUN_MODE" != "inetd" ]; then
-			start-stop-daemon --stop --quiet --pidfile $SMBDPID
-			# Wait a little and remove stale PID file
-			sleep 1
-			if [ -f $SMBDPID ] && ! ps h `cat $SMBDPID` > /dev/null
-			then
-				# Stale PID file (nmbd was succesfully stopped),
-				# remove it (should be removed by smbd itself IMHO.)
-				rm -f $SMBDPID
-			fi
-			echo -n " smbd"
-		fi
-
-		echo "."
-
-		;;
-	reload)
-		echo -n "Reloading /etc/samba/smb.conf (smbd only)"
-		start-stop-daemon --stop --signal HUP --pidfile $SMBDPID
-
-		echo "."
-		;;
-	restart|force-reload)
-		$0 stop
-		sleep 1
-		$0 start
-		;;
-	*)
-		echo "Usage: /etc/init.d/samba {start|stop|reload|restart|force-reload}"
-		exit 1
-		;;
-esac
-
-exit 0

packaging/Debian/debian-sarge/samba.logrotate

@@ -1,21 +0,0 @@
-/var/log/samba/log.smbd {
-	weekly
-	missingok
-	rotate 7
-	postrotate
-		invoke-rc.d --quiet samba reload > /dev/null
-	endscript
-	compress
-	notifempty
-}
-
-/var/log/samba/log.nmbd {
-	weekly
-	missingok
-	rotate 7
-	postrotate
-		[ ! -f /var/run/samba/nmbd.pid ] || kill -HUP `cat /var/run/samba/nmbd.pid`
-	endscript
-	compress
-	notifempty
-}

packaging/Debian/debian-sarge/samba.pamd

@@ -1,3 +0,0 @@
-@include common-auth
-@include common-account
-@include common-session

packaging/Debian/debian-sarge/samba.postinst

@@ -1,230 +0,0 @@
-#!/bin/sh -e
-#
-# Post-installation script for the Samba package for Debian GNU/Linux
-#
-#
-
-case "$1" in
-	configure)
-		# continue below
-	;;
-
-	abort-upgrade|abort-remove|abort-deconfigure)
-		exit 0
-	;;
-
-	*)
-		echo "postinst called with unknown argument \`$1'" >&2
-		exit 0
-	;;
-esac
-
-# Handle debconf
-. /usr/share/debconf/confmodule
-
-INITCONFFILE=/etc/default/samba
-
-# We generate several files during the postinst, and we don't want
-#	them to be readable only by root.
-umask 022
-
-
-# Generate configuration file if it does not exist, using default values.
-[ -r "${INITCONFFILE}" ] || {
-	echo Generating ${INITCONFFILE}... >&2
-	cat >${INITCONFFILE} <<'EOFMAGICNUMBER1234'
-# Defaults for samba initscript
-# sourced by /etc/init.d/samba
-# installed at /etc/default/samba by the maintainer scripts
-#
-
-#
-# This is a POSIX shell fragment
-#
-
-# How should Samba (smbd) run? Possible values are "daemons"
-#	or "inetd".
-RUN_MODE=""
-EOFMAGICNUMBER1234
-}
-
-# --- Begin of FHS migration code ---
-
-# Starting with Samba 2.2.3-4 the WINS database, the browse
-#	database and other important run-time files are stored in
-#	FHS-compliant directories. The following code takes care of
-#	moving the files in the old directories (/var/samba/ and
-#	/var/state/samba) to the new FHS-compliant directories.
-
-if [ -d /var/samba/ ] && [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.0.7-4
-then
-	mv /var/samba/* /var/lib/samba/ 2>/dev/null || true
-	rmdir /var/samba/
-fi
-
-# Default for anything we don't know about (see next two 'for' loops)
-#	is /var/lib/samba -- guaranteed not to accidentally tromp on any 
-#	files the admin thought were safe.
-if [ -d /var/state/samba ] && [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.2.3-4
-then
-	mv /var/state/samba/* /var/lib/samba/ 2>/dev/null || true
-	rmdir /var/state/samba/
-
-	# It's not FHS, and it's probably our fault this is here,
-	# so delete it if we can.
-	rmdir /var/state/ 2> /dev/null || true
-fi
-
-# All these files are now placed in their respective FHS-compliant
-#	directories.  Separate out the individual files accordingly.
-for F in browse.dat printing.tdb winbindd_cache.tdb
-do
-	if [ -e /var/lib/samba/"$F" ]; then
-		mv /var/lib/samba/"$F" /var/cache/samba/
-	fi
-done
-
-for F in brlock.tdb connections.tdb locking.tdb messages.tdb nmbd.pid \
-         sessionid.tdb smbd.pid unexpected.tdb 
-do
-	if [ -e /var/lib/samba/"$F" ]; then
-		mv /var/lib/samba/"$F" /var/run/samba/
-	fi
-done
-
-# Beginning with Samba 2.2.5-1, we also move the domain secrets file
-# to a more suitable location, since no one really edits this by hand.
-if [ -e /etc/samba/secrets.tdb -a ! -e /var/lib/samba/secrets.tdb ]
-then
-	mv /etc/samba/secrets.tdb /var/lib/samba/
-fi
-
-# If upgrading from a previous 2.999 snapshot, move the passdb.tdb
-# database into /var/lib.
-
-if [ -n "$2" ] && dpkg --compare-versions "$2" lt 2.999+3.0.alpha23-5 \
-   && [ -e /etc/samba/passdb.tdb -a ! -e /var/lib/samba/passdb.tdb ]
-then
-	mv /etc/samba/passdb.tdb /var/lib/samba/
-fi
-
-# --- End of FHS migration code ---
-
-# If upgrading from a previous 2.999 snapshot, clear the broken
-# registry.tdb file.
-if [ -n "$2" ] && dpkg --compare-versions "$2" gt 2.99.cvs.20020713-1 \
-   && dpkg --compare-versions "$2" lt 2.999+3.0cvs20020805-1
-then
-	rm -f /var/lib/samba/registry.tdb
-fi
-
-# ------------------------- Debconf questions start ---------------------
-
-# Run Samba as daemons or from inetd?
-db_get samba/run_mode || true
-RUN_MODE="${RET}"
-
-TMPFILE=/etc/default/samba.dpkg-tmp
-sed -e "s/^[[:space:]]*RUN_MODE[[:space:]]*=.*/RUN_MODE=\"${RUN_MODE}\"/" \
-        < ${INITCONFFILE} >${TMPFILE}
-chmod a+r ${TMPFILE}
-mv -f ${TMPFILE} ${INITCONFFILE}
-
-# Generate a smbpasswd file?
-db_get samba/generate_smbpasswd || true
-GENERATE_SMBPASSWD="${RET}"
-
-db_get samba/tdbsam || true
-PDB_MIGRATE="${RET}"
-
-# Done with debconf now.
-db_stop
-
-umask 066
-
-# FIXME: disable if ldapsam support is enabled?
-# FIXME: we don't want to pass these through the smbpasswd backend,
-# some of the faking can cause us problems!
-if [ "${GENERATE_SMBPASSWD}" = "true" -a ! -e /var/lib/samba/passdb.tdb -a ! -e /etc/samba/smbpasswd ]; then
-	getent passwd | /usr/sbin/mksmbpasswd > /etc/samba/smbpasswd
-	pdbedit -i smbpasswd -e tdbsam
-	rm /etc/samba/smbpasswd
-fi
-
-umask 022
-
-if [ -n "$2" -a -e /etc/samba/smbpasswd \
-     -a ! -e /var/lib/samba/passdb.tdb -a "$PDB_MIGRATE" = "true" ] \
-   && dpkg --compare-versions "$2" lt 2.99.cvs.20020713-2
-then
-	umask 066
-	pdbedit -i smbpasswd -e tdbsam
-	rm /etc/samba/smbpasswd
-	umask 022
-
-	# The database has been moved, now make sure we can still find it.
-	PASSDB=`sed -n -e"s/^[[:space:]]*\[global\]/\[global\]/i
-			/^\[global\]/,/^[[:space:]]*\[/ \
-				s/^[[:space:]]*passdb backend[[:space:]]*=[[:space:]]*//pi" \
-			< /etc/samba/smb.conf \
-	 | tail -n 1`
-	if echo "$PASSDB" | egrep -q "(^|[[:space:]])smbpasswd"; then
-		if ! echo "$PASSDB" | egrep -q "(^|[[:space:]])tdbsam"; then
-			PASSDB=`echo $PASSDB | sed -e's/\(^\|[[:space:]]\)smbpasswd/\1tdbsam/'`
-		fi
-	fi
-	if ! echo "$PASSDB" | egrep -q "(^|[[:space:]])tdbsam"; then
-		PASSDB="tdbsam $PASSDB"
-	fi
-	TMPFILE=/etc/samba/smb.conf.dpkg-tmp
-	sed -e "s/^\([[:space:]]*\)\[global\]/\1\[global\]/i
-		/^[[:space:]]*\[global\]/,/^[[:space:]]*\[/ \
-			s/^\([[:space:]]*\)passdb backend[[:space:]]*=.*/\1passdb backend = ${PASSDB}/i" \
-		< /etc/samba/smb.conf >${TMPFILE}
-	chmod a+r ${TMPFILE}
-	mv -f ${TMPFILE} /etc/samba/smb.conf
-fi
-
-# ------------------------- Debconf questions end ---------------------
-
-# Handle removal of nmbd from inetd.conf, which is no longer a supported
-#	configuration.
-if dpkg --compare-versions "$2" lt 2.999+3.0.alpha20-4; then
-	update-inetd --remove netbios-ns
-fi
-
-# We want to add these entries to inetd.conf commented out. Otherwise
-#	UDP traffic could make inetd to start nmbd or smbd right during
-#	the configuration stage.
-if [ -z "$2" ]; then
-	update-inetd --add "#<off># netbios-ssn	stream	tcp	nowait	root	/usr/sbin/tcpd	/usr/sbin/smbd"
-fi
-
-if [ "$RUN_MODE" = "daemons" ]; then
-	update-inetd --disable netbios-ssn
-else
-	update-inetd --enable netbios-ssn
-fi
-
-# This check is a safety net: the /etc/samba/smbpasswd file must have
-#	permissions 600.
-if [ -f /etc/samba/smbpasswd ]; then
-	chmod 600 /etc/samba/smbpasswd
-fi
-
-# Do the same check for /var/backup/smbpasswd.bak, just in case.
-if [ -f /var/backups/smbpasswd.bak ]; then
-	chmod 600 /var/backups/smbpasswd.bak
-fi
-
-# Delete old /etc/samba/debian_config file, which is not used anymore
-#	now that we are using debconf.
-rm -f /etc/samba/debian_config
-
-# Move old log files to the new location of Samba's log files
-mv -f /var/log/nmb* /var/log/samba/ 2> /dev/null || true
-mv -f /var/log/smb* /var/log/samba/ 2> /dev/null || true
-
-#DEBHELPER#
-
-exit 0

packaging/Debian/debian-sarge/samba.postrm

@@ -1,26 +0,0 @@
-#!/bin/sh -e
-#
-#
-
-if [ "$1" = purge ]; then
-
-	# Remove Samba's state files, both volatile and non-volatile
-	rm -Rf /var/run/samba/ /var/cache/samba/ /var/lib/samba
-
-	# Remove log files
-	rm -Rf /var/log/samba/
-
-	# Remove init.d configuration file
-	echo  Removing configuration file /etc/default/samba...  >&2
-	rm -f /etc/default/samba
-
-	# Remove NetBIOS entries from /etc/inetd.conf
-	update-inetd --remove netbios-ssn
-
-else
-	# Not purging, do not remove NetBIOS entries from /etc/inetd.conf
-	update-inetd --disable netbios-ssn
-
-fi
-
-#DEBHELPER#

packaging/Debian/debian-sarge/samba.prerm

@@ -1,10 +0,0 @@
-#!/bin/sh -e
-
-if [ "$1" = upgrade -a -n "$2" ] && dpkg --compare-versions "$2" lt 2.99 \
-   && [ -e /var/lib/samba/passdb.tdb -a ! -e /etc/samba/smbpasswd ]
-then
-	pdbedit -i tdbsam -e smbpasswd
-	rm -f /var/lib/samba/passdb.tdb
-fi
-
-#DEBHELPER#

packaging/Debian/debian-sarge/samba.templates

@@ -1,50 +0,0 @@
-Template: samba/generate_smbpasswd
-Type: boolean
-Default: false
-_Description: Create samba password database, /var/lib/samba/passdb.tdb?
- To be compatible with the defaults in most versions of Windows, Samba must
- be configured to use encrypted passwords.  This requires user passwords to
- be stored in a file separate from /etc/passwd. This file can be created
- automatically, but the passwords must be added manually (by you or the
- user) by running smbpasswd, and you must arrange to keep it up-to-date in
- the future.  If you do not create it, you will have to reconfigure samba
- (and probably your client machines) to use plaintext passwords. See
- /usr/share/doc/samba-doc/htmldocs/ENCRYPTION.html from the samba-doc
- package for more details.
-
-Template: samba/log_files_moved
-Type: note
-_Description: Samba's log files have moved.
- Starting with the first packages of Samba 2.2 for Debian the log files for
- both Samba daemons (nmbd and smbd) are now stored in /var/log/samba/. The
- names of the files are log.nmbd and log.smbd, for nmbd and smbd
- respectively.
- .
- The old log files that were in /var/log/ will be moved to the new location
- for you.
-
-Template: samba/nmbd_from_inetd
-Type: note
-_Description: Running nmbd from inetd is no longer supported
- Your system was previously configured to start nmbd and smbd from inetd. 
- As of version 2.999+3.0.alpha20-4, nmbd will no longer be started from
- inetd.  If you have modified your /etc/init.d/samba startup script, you
- may need to adjust it by hand now so that nmbd will start.
-
-Template: samba/run_mode
-Type: select
-_Choices: daemons, inetd
-Default: daemons
-_Description: How do you want to run Samba?
- The Samba daemon smbd can run as a normal daemon or from inetd. Running as
- a daemon is the recommended approach.
-
-Template: samba/tdbsam
-Type: boolean
-Default: false
-_Description: Move /etc/samba/smbpasswd to /var/lib/samba/passdb.tdb?
- Samba 3.0 introduces a newer, more complete SAM database interface which
- supersedes the /etc/samba/smbpasswd file.  Would you like your existing
- smbpasswd file to be migrated to /var/lib/samba/passdb.tdb for you?  If you
- plan to use another pdb backend (e.g., LDAP) instead, you should answer
- 'no' here.

packaging/Debian/debian-sarge/scripts/patch-source

@@ -1,28 +0,0 @@
-#!/bin/sh -e
-#
-#
-
-for patch in debian/patches/*.patch; do
-	echo '->'`basename $patch`:
-	patch -p1 --ignore-whitespace < $patch
-done
-
-# This code is currently not used because it creates a long version
-# number string. For now we're sticking to <upstream version>-Debian,
-# as in 3.0.0rc2-Debian. peloy@debian.org.-
-
-# ---- Begin unused code ----
-# Get Debian version number from 1st line of the Debian changelog
-#DEBIAN_VERSION=`sed -n -e '1s/^.*(\(.*\)).*$/\1/p' debian/changelog`
-
-# Insert Debian version number in source/VERSION, which will then be
-# used to create source/include/version.h.
-#TMPFILE=source/VERSION.debian
-#sed -e "s/^\(SAMBA_VERSION_VENDOR_SUFFIX=\).*$/\1\"Debian-${DEBIAN_VERSION}\"/"  source/VERSION > ${TMPFILE}
-#mv -f ${TMPFILE} source/VERSION
-# ---- End unused code ----
-
-# Regenerate configure only if it is older than configure.in
-[ source/configure -ot source/configure.in ] && (cd source && sh ./autogen.sh)
-
-exit 0

packaging/Debian/debian-sarge/scripts/unpatch-source

@@ -1,20 +0,0 @@
-#!/bin/sh -e
-#
-#
-
-# We want to reverse the patches in the opposite order we applied
-#	them, hence the 'ls|sort -r'.
-for patch in `ls debian/patches/*.patch | sort -r`; do
-	patch -p1 -R --ignore-whitespace < $patch
-done
-
-# Unused code. See comment in the patch-source script.
-
-#TMPFILE=source/VERSION.debian
-#sed -e "s/^\(SAMBA_VERSION_VENDOR_SUFFIX=\).*$/\1/" source/VERSION > ${TMPFILE}
-#mv -f ${TMPFILE} source/VERSION
-
-# Regenerate configure only if it is older than configure.in
-[ source/configure -ot source/configure.in ] && (cd source && sh ./autogen.sh)
-
-exit 0

packaging/Debian/debian-sarge/smb.conf

@@ -1,237 +0,0 @@
-#
-# Sample configuration file for the Samba suite for Debian GNU/Linux.
-#
-#
-# This is the main Samba configuration file. You should read the
-# smb.conf(5) manual page in order to understand the options listed
-# here. Samba has a huge number of configurable options most of which 
-# are not shown in this example
-#
-# Any line which starts with a ; (semi-colon) or a # (hash) 
-# is a comment and is ignored. In this example we will use a #
-# for commentary and a ; for parts of the config file that you
-# may wish to enable
-#
-# NOTE: Whenever you modify this file you should run the command
-# "testparm" to check that you have not many any basic syntactic 
-# errors. 
-#
-
-#======================= Global Settings =======================
-
-[global]
-
-## Browsing/Identification ###
-
-# Change this to the workgroup/NT-domain name your Samba server will part of
-   workgroup = DEBIAN_FANS
-
-# server string is the equivalent of the NT Description field
-   server string = %h server (Samba %v)
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
-;   wins support = no
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-;   wins server = w.x.y.z
-
-# This will prevent nmbd to search for NetBIOS names through DNS.
-   dns proxy = no
-
-# What naming service and in what order should we use to resolve host names
-# to IP addresses
-;   name resolve order = lmhosts host wins bcast
-
-
-#### Debugging/Accounting ####
-
-# This tells Samba to use a separate log file for each machine
-# that connects
-   log file = /var/log/samba/log.%m
-
-# Put a capping on the size of the log files (in Kb).
-   max log size = 1000
-
-# If you want Samba to only log through syslog then set the following
-# parameter to 'yes'.
-;   syslog only = no
-
-# We want Samba to log a minimum amount of information to syslog. Everything
-# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
-# through syslog you should set the following parameter to something higher.
-   syslog = 0
-
-# Do something sensible when Samba crashes: mail the admin a backtrace
-   panic action = /usr/share/samba/panic-action %d
-
-
-####### Authentication #######
-
-# "security = user" is always a good idea. This will require a Unix account
-# in this server for every user accessing the server. See
-# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc
-# package for details.
-;   security = user
-
-# You may wish to use password encryption.  See the section on
-# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
-   encrypt passwords = no
-
-# If you are using encrypted passwords, Samba will need to know what
-# password database type you are using.  
-   passdb backend = tdbsam
-
-   obey pam restrictions = yes
-
-;   guest account = nobody
-   invalid users = root
-
-# This boolean parameter controls whether Samba attempts to sync the Unix
-# password with the SMB password when the encrypted SMB password in the
-# passdb is changed.
-;   unix password sync = no
-
-# For Unix password sync to work on a Debian GNU/Linux system, the following
-# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for
-# sending the correct chat script for the passwd program in Debian Potato).
-   passwd program = /usr/bin/passwd %u
-   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n .
-
-# This boolean controls whether PAM will be used for password changes
-# when requested by an SMB client instead of the program listed in
-# 'passwd program'. The default is 'no'.
-;   pam password change = no
-
-
-########## Printing ##########
-
-# If you want to automatically load your printer list rather
-# than setting them up individually then you'll need this
-;   load printers = yes
-
-# lpr(ng) printing. You may wish to override the location of the
-# printcap file
-;   printing = bsd
-;   printcap name = /etc/printcap
-
-# CUPS printing.  See also the cupsaddsmb(8) manpage in the
-# cupsys-client package.
-;   printing = cups
-;   printcap name = cups
-
-# When using [print$], root is implicitly a 'printer admin', but you can
-# also give this right to other users to add drivers and set printer
-# properties
-;   printer admin = @ntadmin
-
-
-######## File sharing ########
-
-# Name mangling options
-;   preserve case = yes
-;   short preserve case = yes
-
-
-############ Misc ############
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting
-;   include = /home/samba/etc/smb.conf.%m
-
-# Most people will find that this option gives better performance.
-# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
-# for details
-# You may want to add the following on a Linux system:
-#         SO_RCVBUF=8192 SO_SNDBUF=8192
-   socket options = TCP_NODELAY
-
-# The following parameter is useful only if you have the linpopup package
-# installed. The samba maintainer and the linpopup maintainer are
-# working to ease installation and configuration of linpopup and samba.
-;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
-
-# Domain Master specifies Samba to be the Domain Master Browser. If this
-# machine will be configured as a BDC (a secondary logon server), you
-# must set this to 'no'; otherwise, the default behavior is recommended.
-;   domain master = auto
-
-# Some defaults for winbind (make sure you're not using the ranges
-# for something else.)
-;   idmap uid = 10000-20000
-;   idmap gid = 10000-20000
-;   template shell = /bin/bash
-
-#======================= Share Definitions =======================
-
-[homes]
-   comment = Home Directories
-   browseable = no
-
-# By default, the home directories are exported read-only. Change next
-# parameter to 'yes' if you want to be able to write to them.
-   writable = no
-
-# File creation mask is set to 0700 for security reasons. If you want to
-# create files with group=rw permissions, set next parameter to 0775.
-   create mask = 0700
-
-# Directory creation mask is set to 0700 for security reasons. If you want to
-# create dirs. with group=rw permissions, set next parameter to 0775.
-   directory mask = 0700
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-# (you need to configure Samba to act as a domain controller too.)
-;[netlogon]
-;   comment = Network Logon Service
-;   path = /home/samba/netlogon
-;   guest ok = yes
-;   writable = no
-;   share modes = no
-
-[printers]
-   comment = All Printers
-   browseable = no
-   path = /tmp
-   printable = yes
-   public = no
-   writable = no
-   create mode = 0700
-
-# Windows clients look for this share name as a source of downloadable
-# printer drivers
-[print$]
-   comment = Printer Drivers
-   path = /var/lib/samba/printers
-   browseable = yes
-   read only = yes
-   guest ok = no
-# Uncomment to allow remote administration of Windows print drivers.
-# Replace 'ntadmin' with the name of the group your admin users are
-# members of.
-;   write list = root, @ntadmin
-
-# A sample share for sharing your CD-ROM with others.
-;[cdrom]
-;   comment = Samba server's CD-ROM
-;   writable = no
-;   locking = no
-;   path = /cdrom
-;   public = yes
-
-# The next two parameters show how to auto-mount a CD-ROM when the
-#	cdrom share is accesed. For this to work /etc/fstab must contain
-#	an entry like this:
-#
-#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
-#
-# The CD-ROM gets unmounted automatically after the connection to the
-#
-# If you don't want to use auto-mounting/unmounting make sure the CD
-#	is mounted on /cdrom
-#
-;   preexec = /bin/mount /cdrom
-;   postexec = /bin/umount /cdrom
-

packaging/Debian/debian-sarge/smbclient.files

@@ -1,15 +0,0 @@
-usr/bin/smbclient
-usr/bin/smbtar
-usr/bin/rpcclient
-usr/bin/smbspool
-usr/bin/smbtree
-usr/bin/smbcacls
-usr/bin/smbcquotas
-usr/share/man/man1/smbclient.1
-usr/share/man/man1/smbtar.1
-usr/share/man/man1/rpcclient.1
-usr/share/man/man8/smbspool.8
-usr/share/man/man1/smbcacls.1
-usr/share/man/man1/smbcquotas.1
-usr/share/man/man1/smbtree.1
-usr/lib/cups/backend/smb

packaging/Debian/debian-sarge/smbfs.files

@@ -1,12 +0,0 @@
-sbin/mount.smbfs
-sbin/mount.smb
-sbin/mount.cifs
-usr/bin/smbmount
-usr/bin/smbumount
-usr/bin/smbmnt
-usr/share/man/man8/smbmount.8
-usr/share/man/man8/smbumount.8
-usr/share/man/man8/smbmnt.8
-usr/share/man/man8/mount.smb.8
-usr/share/man/man8/mount.smbfs.8
-usr/share/man/man8/mount.cifs.8

packaging/Debian/debian-sarge/smbwrapper.dirs

@@ -1,2 +0,0 @@
-usr/bin
-usr/share/samba

packaging/Debian/debian-sarge/smbwrapper.docs

@@ -1,2 +0,0 @@
-source/smbwrapper/README
-source/smbwrapper/PORTING

packaging/Debian/debian-sarge/smbwrapper.files

@@ -1 +0,0 @@
-usr/bin/smbsh

packaging/Debian/debian-sarge/swat.config

@@ -1,11 +0,0 @@
-#/bin/sh -e
-#
-#
-
-# Source debconf library.
-. /usr/share/debconf/confmodule
-
-db_title "Samba Web Administration Tool (SWAT)"
-
-db_input medium swat/smb_conf_warn || true
-db_go

packaging/Debian/debian-sarge/swat.dirs

@@ -1,2 +0,0 @@
-usr/sbin
-usr/share/samba/swat

packaging/Debian/debian-sarge/swat.files

@@ -1,3 +0,0 @@
-usr/sbin/swat
-usr/share/samba/swat
-usr/share/man/man8/swat.8

packaging/Debian/debian-sarge/swat.postinst

@@ -1,23 +0,0 @@
-#!/bin/sh
-#
-#
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-
-case "$1" in
-	configure)
-		;;
-	abort-upgrade|abort-remove|abort-deconfigure)
-		exit 0
-		;;
-	*)
-		echo "$0: Unknown action \"$1\""
-		exit 0
-		;;
-esac
-
-# Set up swat, turned off by default.
-update-inetd --group OTHER --add \
- '#<off># swat\t\tstream\ttcp\tnowait.400\troot\t/usr/sbin/tcpd\t/usr/sbin/swat'
-
-#DEBHELPER#

packaging/Debian/debian-sarge/swat.postrm

@@ -1,22 +0,0 @@
-#!/bin/sh
-#
-#
-
-case "$1" in
-	purge)
-		update-inetd --remove '/usr/sbin/swat$'
-		;;
-	remove)
-		;;
-	upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
-		;;
-	*)
-		echo "$0: unknown action \"$1\""
-		exit 0
-		;;
-esac
-
-#DEBHELPER#
-
-exit 0
-

packaging/Debian/debian-sarge/swat.templates

@@ -1,6 +0,0 @@
-Template: swat/smb_conf_warn
-Type: note
-_Description: Your smb.conf will be re-written!
- SWAT will rewrite your smb.conf file. It will rearrange the entries and
- delete all comments, include= and copy= options. If you have a carefully
- crafted smb.conf then back it up or don't use SWAT!

packaging/Debian/debian-sarge/winbind.dirs

@@ -1 +0,0 @@
-usr/share/lintian/overrides

packaging/Debian/debian-sarge/winbind.files

@@ -1,9 +0,0 @@
-usr/sbin/winbindd
-usr/bin/wbinfo
-usr/bin/ntlm_auth
-usr/share/man/man1/wbinfo.1
-usr/share/man/man1/ntlm_auth.1
-usr/share/man/man8/winbindd.8
-lib/security/pam_winbind.so
-lib/libnss_winbind.so.2
-lib/libnss_wins.so.2

packaging/Debian/debian-sarge/winbind.init

@@ -1,48 +0,0 @@
-#!/bin/sh
-#
-# Start/stops the winbindd daemon.
-#
-#
-
-PATH=/sbin:/bin:/usr/sbin:/usr/bin
-
-DAEMON=/usr/sbin/winbindd
-
-# clear conflicting settings from the environment
-unset TMPDIR
-
-# See if the daemon is there
-test -x $DAEMON || exit 0
-
-case "$1" in
-	start)
-		echo -n "Starting the Winbind daemon: winbindd"
-
-		start-stop-daemon --start --quiet --exec $DAEMON
-
-		echo "."
-		;;
-	stop)
-		echo -n "Stopping the Winbind daemon: winbindd"
-
-		start-stop-daemon --stop --quiet --oknodo --exec $DAEMON
-
-		echo "."
-		;;
-	restart|force-reload)
-		echo -n "Restarting the Winbind daemon: winbindd"
-
-		start-stop-daemon --stop --quiet --oknodo --exec $DAEMON
-		sleep 2
-		start-stop-daemon --start --quiet --exec $DAEMON
-
-		echo "."
-		;;
-	*)
-		echo "Usage: /etc/init.d/winbind {start|stop|restart|force-reload}"
-		exit 1
-		;;
-esac
-
-exit 0
-

packaging/Debian/debian-sarge/winbind.lintian

@@ -1,6 +0,0 @@
-winbind: ldconfig-symlink-missing-for-shlib lib/libnss_winbind.so lib/libnss_winbind.so.2 libnss_winbind.so
-winbind: ldconfig-symlink-missing-for-shlib lib/libnss_wins.so lib/libnss_wins.so.2 libnss_wins.so
-winbind: no-shlibs-control-file lib/libnss_winbind.so.2
-winbind: no-shlibs-control-file lib/libnss_wins.so.2
-winbind: postinst-must-call-ldconfig lib/libnss_wins.so.2
-winbind: postrm-should-call-ldconfig lib/libnss_wins.so.2

packaging/Debian/debian-sarge/winbind.logrotate

@@ -1,10 +0,0 @@
-/var/log/samba/log.winbindd {
-	weekly
-	missingok
-	rotate 7
-	postrotate
-	[ -f /var/run/samba/winbindd.pid ] && kill -HUP `cat /var/run/samba/winbindd.pid`
-	endscript
-	compress
-	notifempty
-}

packaging/Debian/debian-sarge/wins2dns.awk

@@ -1,38 +0,0 @@
-#!/usr/bin/awk -f
-#
-# Date: Wed, 26 Aug 1998 10:37:39 -0600 (MDT)
-# From: Jason Gunthorpe <jgg@deltatee.com>
-# To: samba@packages.debian.org
-# Subject: Nifty samba script
-#
-# Here is a really nifty script I just wrote for samba, it takes the wins
-# database in /var/samba/wins and writes out two dns files for it. In this
-# way network wide wins clients can get into the dns for use by unix
-# machines.
-# 
-# Perhaps this could be included in  /usr/doc/examples or somesuch.
-#
-
-BEGIN {
-  FS="#|\"";
-FORWARD="/tmp/wins.hosts"
-REVERSE="/tmp/wins.rev"
-DOMAIN="ven.ra.rockwell.com"
-}
-$3 == "00" {
-  split($4,a," " );
-  split(a[2],b,".");
-  while (sub(" ","-",$2));
-  $2=tolower($2);
-  if (b[1] == "255")
-    next;
-  if (length($2) >= 8)
-    print $2"\ta\t"a[2] > FORWARD
-  else
-    print $2"\t\ta\t"a[2] > FORWARD
-  print b[4]"."b[3]"\t\tptr\t"$2"."DOMAIN"." > REVERSE
-}
-END {
-  system("echo killall -HUP named");
-}
-

packaging/Debian/debian-unstable/README.build

@@ -1,397 +0,0 @@
-From: Steve Langasek <vorlon@netexpress.net>
-To: "Eloy A. Paris" <eloy.paris@usa.net>
-Date: Thu, 23 Aug 2001 21:20:05 -0500 (CDT)
-Subject: Re: autobuilder failure on arm for samba-2.2.1a-3
-In-Reply-To: <20010823100906.A1092@antenas>
-Message-ID: <Pine.LNX.4.30.0108231744090.11071-100000@tennyson.netexpress.net>
-MIME-Version: 1.0
-Content-Type: TEXT/PLAIN; charset=US-ASCII
-
-On Thu, 23 Aug 2001, Eloy A. Paris wrote:
-
-> On Wed, Aug 22, 2001 at 03:01:01PM -0500, Steve Langasek wrote:
-
-> > Hmm.  Maybe the thing to do is to focus on getting config.cache (not log,
-> > cache) support into the package.  Issues like this are frequent enough with
-> > Samba, and the configure tests add enough time to the build process, that I
-> > think there'd be much benefit in being able to step past a lot of these.
-
-> Uhhmmm... I don't know, I guess I don't like much the idea of
-> maintaining a config.cache. It looks like extra work plus a
-> compilation process that is "synthetic" or atificial. What happens if
-> the Samba Team adds a new test, or modifies the configure script, will
-> the config.cache pick those up?
-
-> In any case, you are the expert, so if you think that's the way to go,
-> and the burden far exceeds the problems we have right now I say let's
-> go for it. I am not well versed on autoconf and the configure process,
-> that's all...
-
-Well, I'll attach my work to the bottom of this message and let you judge it
-for yourself.
-
-The config.cache I'm trying to generate here is not equivalent to what
-a configure script outputs.  The only values I'm including are those which 1)
-are no-brainers on any glibc-based platform, 2) are questions we need to force
-a particular value for regardless of the kernel being built against, or 3) are
-questions about specific bizarre features of proprietary Unices that we'll
-always get an answer of 'no' to.
-
-I've removed all of the config.cache variables related to headers, or to
-checks for particular libraries; I think it's pretty safe to assert that glibc
-provides basic C functions like select(), setenv(), and waitpid() on all our
-build targets, but I think it's less safe to assert that they'll always be
-provided by particular header files.
-
-So the config.cache won't automatically be updated with answers to new
-configure tests, but it also doesn't need to in order to be useful.  There's
-really only a handful of variables in there that we /need/ in order to
-guarantee correctly-built packages, and if you want to leave out everything
-else, that's perfectly ok too.  Everything from the fifth stanza on down is
-just a build-time speed-up for some of the slower architectures.  Well, it
-also has the fringe benefit that the packages will FAIL to build if someone
-tries rebuilding for a really bizarre (non-Linux, non-glibc) architecture.  I
-see that as a plus :), you may disagree, but in any case my next trick would
-be to add a global variable developers can set to bypass the provided
-config.cache.
-
-
-It is a little artificial, but the whole point of .debs is to be able to build
-binaries in a controlled environment.  Right now, we don't really have control
-over what happens in the autobuilders.  We have even /less/ control over what
-happens in a stable release:  it's been two weeks now since I built binaries
-for bug #94380, and they haven't been uploaded to security.d.o yet.  I'm
-guessing they won't be uploaded until Wichert is back from vacation, either --
-which is fine, but it would be nice if we didn't have to worry about
-mis-builds by the security team, or about putting the security team to extra
-trouble after the fact to get packages fixed.
-
-With a pre-loaded config.cache, we can ensure that bugs of this kind don't
-happen in woody.  We can take the arm autobuilder problem into our own hands,
-and not have to worry about quirkiness in the build environment.  We can even
-close bug #109773, since we no longer have to worry about detecting the
-setuid() routines.
-
-
-So to me, it definitely seems worth it.  But you're the maintainer, and I
-won't ask you to put anything in the package that you're not comfortable with.
-
-
-> By the way, I think I remember someone was able to build 2.2.x succesfully on
-> the ARM. If this is the case, could it be that there's something weird
-> with Phillip's setup?
-
-It could be.  There are arm packages for 2.2.1a-1, so at /some/ point the
-autobuilder was able to pass the locking test.
-
-
-> P.S. How did you know about the ARM build problems? I don't see any
-> bugs about this...
-
-<http://ftp-master.debian.org/testing/>, follow the links for samba...  The
-exact reference for the arm autobuilder is at
-<http://buildd.armlinux.org/~buildd/build.php?pkg=samba&ver=2.2.1a-4&arch=arm>.
-
-Regards,
-Steve Langasek
-postmodern programmer
-
-
-diff -uNrw samba-2.2.1a-bak/debian/changelog samba-2.2.1a/debian/changelog
---- samba-2.2.1a-bak/debian/changelog	Thu Aug 23 10:27:54 2001
-+++ samba-2.2.1a/debian/changelog	Thu Aug 23 10:28:08 2001
-@@ -1,3 +1,12 @@
-+samba (2.2.1a-4.1) unstable; urgency=low
-+
-+  * Fix up the build system to avoid needing to run configure as root to
-+    answer questions we already know the answers to.
-+  * In the process, make surprising progress towards being able to
-+    cross-compile the samba packages.
-+
-+ -- Steve Langasek <vorlon@debian.org>  Wed, 22 Aug 2001 23:35:00 -0500
-+
- samba (2.2.1a-4) unstable; urgency=low
-
-   * Fixed typo in smbmount's mount page.
-diff -uNrw samba-2.2.1a-bak/debian/config.cache samba-2.2.1a/debian/config.cache
---- samba-2.2.1a-bak/debian/config.cache	Wed Dec 31 18:00:00 1969
-+++ samba-2.2.1a/debian/config.cache	Thu Aug 23 10:28:08 2001
-@@ -0,0 +1,231 @@
-+#
-+# 22 August 2001  Steve Langasek <vorlon@debian.org>
-+#
-+# This file is a shell script that caches the results of configure
-+# tests run on this system so they can be shared between configure
-+# scripts and configure runs.  It is not useful on other systems.
-+# If it contains results you don't want to keep, you may remove or edit it.
-+#
-+# By default, configure uses ./config.cache as the cache file,
-+# creating it if it does not exist already.  You can give configure
-+# the --cache-file=FILE option to use a different cache file; that is
-+# what configure does when it calls configure scripts in
-+# subdirectories, so they share the cache.
-+# Giving --cache-file=/dev/null disables caching, for debugging configure.
-+# config.status only pays attention to the cache file if you give it the
-+# --recheck option to rerun configure.
-+#
-+#
-+# This config.cache file contains a list of acceptable autoconf
-+# values which can be used in compiling Samba for Debian woody/sid.
-+#
-+# Autoconf sorts options alphabetically in its output.  This file
-+# groups options logically.
-+
-+
-+# Load any architecture-specific settings
-+if [ -n "$DEB_HOST_GNU_TYPE" \
-+     -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then
-+	. ../debian/config.cache.${DEB_HOST_GNU_TYPE}
-+fi
-+
-+
-+# This is at the top because it's most in need of regular tweaking.
-+# These are options which are supported on 2.4 kernels, but not on 2.2
-+# kernels.
-+
-+samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no}
-+samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no}
-+samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no}
-+
-+
-+# These are present in 2.2 kernels, but not in 2.0...
-+
-+samba_cv_have_setresuid=${samba_cv_have_setresuid=yes}
-+samba_cv_have_setresgid=${samba_cv_have_setresgid=yes}
-+samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes}
-+
-+
-+# POSIX ACL support not present in Linux 2.2; not allowed in the
-+# Debian packages, even if present on the build machine.
-+
-+ac_cv_header_sys_acl_h=${ac_cv_header_sys_acl_h=no}
-+
-+
-+# Various basic libc/compiler stuff that it's blindingly obvious that
-+# Linux supports (now watch me get bitten for saying that)
-+
-+ac_cv_c_const=${ac_cv_c_const=yes}
-+ac_cv_c_inline=${ac_cv_c_inline=inline}
-+samba_cv_volatile=${samba_cv_volatile=yes}
-+ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes}
-+ac_cv_func_bzero=${ac_cv_func_bzero=yes}
-+ac_cv_func_chmod=${ac_cv_func_chmod=yes}
-+ac_cv_func_chown=${ac_cv_func_chown=yes}
-+ac_cv_func_chroot=${ac_cv_func_chroot=yes}
-+ac_cv_func_connect=${ac_cv_func_connect=yes}
-+ac_cv_func_dup2=${ac_cv_func_dup2=yes}
-+ac_cv_func_execl=${ac_cv_func_execl=yes}
-+ac_cv_func_fchmod=${ac_cv_func_fchmod=yes}
-+ac_cv_func_fchown=${ac_cv_func_fchown=yes}
-+ac_cv_func_fstat=${ac_cv_func_fstat=yes}
-+ac_cv_func_fsync=${ac_cv_func_fsync=yes}
-+ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes}
-+ac_cv_func_getcwd=${ac_cv_func_getcwd=yes}
-+ac_cv_func_getgrent=${ac_cv_func_getgrent=yes}
-+ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes}
-+ac_cv_func_getspnam=${ac_cv_func_getspnam=yes}
-+ac_cv_func_glob=${ac_cv_func_glob=yes}
-+ac_cv_func_grantpt=${ac_cv_func_grantpt=yes}
-+ac_cv_func_initgroups=${ac_cv_func_initgroups=yes}
-+ac_cv_func_llseek=${ac_cv_func_llseek=yes}
-+ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes}
-+ac_cv_func_memmove=${ac_cv_func_memmove=yes}
-+ac_cv_func_memset=${ac_cv_func_memset=yes}
-+ac_cv_func_mktime=${ac_cv_func_mktime=yes}
-+ac_cv_func_pipe=${ac_cv_func_pipe=yes}
-+ac_cv_func_poll=${ac_cv_func_poll=yes}
-+ac_cv_func_pread=${ac_cv_func_pread=yes}
-+ac_cv_func_pwrite=${ac_cv_func_pwrite=yes}
-+ac_cv_func_rand=${ac_cv_func_rand=yes}
-+ac_cv_func_random=${ac_cv_func_random=yes}
-+ac_cv_func_readlink=${ac_cv_func_readlink=yes}
-+ac_cv_func_rename=${ac_cv_func_rename=yes}
-+ac_cv_func_select=${ac_cv_func_select=yes}
-+ac_cv_func_setenv=${ac_cv_func_setenv=yes}
-+ac_cv_func_setgroups=${ac_cv_func_setgroups=yes}
-+ac_cv_func_setsid=${ac_cv_func_setsid=yes}
-+ac_cv_func_sigaction=${ac_cv_func_sigaction=yes}
-+ac_cv_func_sigblock=${ac_cv_func_sigblock=yes}
-+ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes}
-+ac_cv_func_snprintf=${ac_cv_func_snprintf=yes}
-+ac_cv_func_srand=${ac_cv_func_srand=yes}
-+ac_cv_func_srandom=${ac_cv_func_srandom=yes}
-+ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes}
-+ac_cv_func_strchr=${ac_cv_func_strchr=yes}
-+ac_cv_func_strdup=${ac_cv_func_strdup=yes}
-+ac_cv_func_strerror=${ac_cv_func_strerror=yes}
-+ac_cv_func_strftime=${ac_cv_func_strftime=yes}
-+ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes}
-+ac_cv_func_strtoul=${ac_cv_func_strtoul=yes}
-+ac_cv_func_symlink=${ac_cv_func_symlink=yes}
-+ac_cv_func_usleep=${ac_cv_func_usleep=yes}
-+ac_cv_func_utime=${ac_cv_func_utime=yes}
-+ac_cv_func_utimes=${ac_cv_func_utimes=yes}
-+ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes}
-+ac_cv_func_waitpid=${ac_cv_func_waitpid=yes}
-+ac_cv_type_ino_t=${ac_cv_type_ino_t=yes}
-+ac_cv_type_mode_t=${ac_cv_type_mode_t=yes}
-+ac_cv_type_pid_t=${ac_cv_type_pid_t=yes}
-+ac_cv_type_size_t=${ac_cv_type_size_t=yes}
-+ac_cv_type_uid_t=${ac_cv_type_uid_t=yes}
-+samba_cv_socklen_t=${samba_cv_socklen_t=yes}
-+
-+# Yes, we know Linux supports fcntl locking.  Just ignore
-+# any errors caused by building on an NFS mount.
-+samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes}
-+
-+
-+# smbwrapper doesn't work because the glibc maintainers don't want
-+# to support transparent userland VFS.  We might as well preempt
-+# any checks for shadowed symbols that are only useful for smbwrapper.
-+
-+ac_cv_func___acl=${ac_cv_func___acl=no}
-+ac_cv_func__acl=${ac_cv_func__acl=no}
-+ac_cv_func___chdir=${ac_cv_func___chdir=no}
-+ac_cv_func__chdir=${ac_cv_func__chdir=no}
-+ac_cv_func___close=${ac_cv_func___close=no}
-+ac_cv_func__close=${ac_cv_func__close=no}
-+ac_cv_func___closedir=${ac_cv_func___closedir=no}
-+ac_cv_func__closedir=${ac_cv_func__closedir=no}
-+ac_cv_func___dup=${ac_cv_func___dup=no}
-+ac_cv_func__dup=${ac_cv_func__dup=no}
-+ac_cv_func___dup2=${ac_cv_func___dup2=no}
-+ac_cv_func__dup2=${ac_cv_func__dup2=no}
-+ac_cv_func___facl=${ac_cv_func___facl=no}
-+ac_cv_func__facl=${ac_cv_func__facl=no}
-+ac_cv_func___fchdir=${ac_cv_func___fchdir=no}
-+ac_cv_func__fchdir=${ac_cv_func__fchdir=no}
-+ac_cv_func___fcntl=${ac_cv_func___fcntl=no}
-+ac_cv_func__fcntl=${ac_cv_func__fcntl=no}
-+ac_cv_func___fork=${ac_cv_func___fork=no}
-+ac_cv_func__fork=${ac_cv_func__fork=no}
-+ac_cv_func___fstat=${ac_cv_func___fstat=no}
-+ac_cv_func__fstat=${ac_cv_func__fstat=no}
-+ac_cv_func___fstat64=${ac_cv_func___fstat64=no}
-+ac_cv_func__fstat64=${ac_cv_func__fstat64=no}
-+ac_cv_func___fxstat=${ac_cv_func___fxstat=no}
-+ac_cv_func___getcwd=${ac_cv_func___getcwd=no}
-+ac_cv_func__getcwd=${ac_cv_func__getcwd=no}
-+ac_cv_func___getdents=${ac_cv_func___getdents=no}
-+ac_cv_func__getdents=${ac_cv_func__getdents=no}
-+ac_cv_func___llseek=${ac_cv_func___llseek=no}
-+ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no}
-+ac_cv_func__llseek=${ac_cv_func__llseek=no}
-+ac_cv_func___lseek=${ac_cv_func___lseek=no}
-+ac_cv_func__lseek=${ac_cv_func__lseek=no}
-+ac_cv_func___lstat=${ac_cv_func___lstat=no}
-+ac_cv_func__lstat=${ac_cv_func__lstat=no}
-+ac_cv_func___lstat64=${ac_cv_func___lstat64=no}
-+ac_cv_func__lstat64=${ac_cv_func__lstat64=no}
-+ac_cv_func___lxstat=${ac_cv_func___lxstat=no}
-+ac_cv_func___open=${ac_cv_func___open=no}
-+ac_cv_func__open=${ac_cv_func__open=no}
-+ac_cv_func___open64=${ac_cv_func___open64=no}
-+ac_cv_func__open64=${ac_cv_func__open64=no}
-+ac_cv_func___opendir=${ac_cv_func___opendir=no}
-+ac_cv_func__opendir=${ac_cv_func__opendir=no}
-+ac_cv_func___pread=${ac_cv_func___pread=no}
-+ac_cv_func__pread=${ac_cv_func__pread=no}
-+ac_cv_func___pread64=${ac_cv_func___pread64=no}
-+ac_cv_func__pread64=${ac_cv_func__pread64=no}
-+ac_cv_func___pwrite=${ac_cv_func___pwrite=no}
-+ac_cv_func__pwrite=${ac_cv_func__pwrite=no}
-+ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no}
-+ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no}
-+ac_cv_func___read=${ac_cv_func___read=no}
-+ac_cv_func__read=${ac_cv_func__read=no}
-+ac_cv_func___readdir=${ac_cv_func___readdir=no}
-+ac_cv_func__readdir=${ac_cv_func__readdir=no}
-+ac_cv_func___readdir64=${ac_cv_func___readdir64=no}
-+ac_cv_func__readdir64=${ac_cv_func__readdir64=no}
-+ac_cv_func___seekdir=${ac_cv_func___seekdir=no}
-+ac_cv_func__seekdir=${ac_cv_func__seekdir=no}
-+ac_cv_func___stat=${ac_cv_func___stat=no}
-+ac_cv_func__stat=${ac_cv_func__stat=no}
-+ac_cv_func___stat64=${ac_cv_func___stat64=no}
-+ac_cv_func__stat64=${ac_cv_func__stat64=no}
-+ac_cv_func___telldir=${ac_cv_func___telldir=no}
-+ac_cv_func__telldir=${ac_cv_func__telldir=no}
-+ac_cv_func___write=${ac_cv_func___write=no}
-+ac_cv_func__write=${ac_cv_func__write=no}
-+ac_cv_func___xstat=${ac_cv_func___xstat=no}
-+
-+
-+
-+# Miscellaneous stuff that isn't, and shouldn't be, available
-+# in Debian.  Those interested in building debs for other systems may
-+# need to remove some of these defines.
-+
-+ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no}
-+ac_cv_func_crypt16=${ac_cv_func_crypt16=no}
-+ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no}
-+ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no}
-+ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no}
-+ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no}
-+ac_cv_func_rdchk=${ac_cv_func_rdchk=no}
-+ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no}
-+ac_cv_func_setgidx=${ac_cv_func_setgidx=no}
-+ac_cv_func_setluid=${ac_cv_func_setluid=no}
-+ac_cv_func_setpriv=${ac_cv_func_setpriv=no}
-+ac_cv_func_setuidx=${ac_cv_func_setuidx=no}
-+ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no}
-+ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no}
-+ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no}
-+ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no}
-+ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no}
-+ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no}
-+ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no}
-+ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no}
-+ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no}
-+ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no}
-diff -uNrw samba-2.2.1a-bak/debian/config.cache.alpha-linux samba-2.2.1a/debian/config.cache.alpha-linux
---- samba-2.2.1a-bak/debian/config.cache.alpha-linux	Wed Dec 31 18:00:00 1969
-+++ samba-2.2.1a/debian/config.cache.alpha-linux	Thu Aug 23 10:28:08 2001
-@@ -0,0 +1,12 @@
-+# 22 Aug 2001  Steve Langasek <vorlon@debian.org>
-+
-+# This file contains autoconf settings specific to the alpha-linux
-+# platform that should be preloaded when building for this architecture.
-+
-+
-+# Linux 2.2 on Alpha doesn't have a functional setresgid() call, but
-+# Linux 2.4 does.  Ensure that packages compiled for woody remain
-+# compatible with 2.2 kernels, even if the build machine is running 2.4.
-+samba_cv_have_setresgid=${samba_cv_have_setresgid=no}
-+samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=no}
-+samba_cv_USE_SETREUID=${samba_cv_USE_SETREUID=yes}
-diff -uNrw samba-2.2.1a-bak/debian/rules samba-2.2.1a/debian/rules
---- samba-2.2.1a-bak/debian/rules	Thu Aug 23 10:27:54 2001
-+++ samba-2.2.1a/debian/rules	Thu Aug 23 10:28:08 2001
-@@ -15,6 +15,14 @@
- # This has to be exported to make some magic below work.
- export DH_OPTIONS
-
-+# Set the host and build architectures for use with config.cache loading,
-+# cross-building, etc.
-+DEB_HOST_GNU_TYPE	:= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-+DEB_BUILD_GNU_TYPE	:= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-+
-+export DEB_HOST_GNU_TYPE
-+export DEB_BUILD_GNU_TYPE
-+
- BVARS = SMBLOGFILE=/var/log/smb NMBLOGFILE=/var/log/nmb
-
- DESTDIR=`pwd`/debian/samba
-@@ -48,8 +56,11 @@
- #     ./configure --with-fhs --prefix=/usr --sysconfdir=/etc \
- #        --localstatedir=/var
-
-+	if [ -f debian/config.cache ]; then \
-+		cp -f debian/config.cache source/config.cache; \
-+	fi
- #	[ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --exec-prefix=/usr --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp)
--	[ -f source/Makefile ] || (cd source && ./configure --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass)
-+	[ -f source/Makefile ] || (cd source && ./configure --host=$(DEB_HOST_GNU_TYPE)-gnu --build=$(DEB_BUILD_GNU_TYPE)-gnu --with-fhs --prefix=/usr --sysconfdir=/etc --with-privatedir=/etc/samba --with-lockdir=/var/state/samba --localstatedir=/var --with-netatalk --with-smbmount --with-pam --with-syslog --with-sambabook --with-utmp --with-readline --with-pam_smbpass)
-
- 	touch configure-stamp
-

packaging/Debian/debian-unstable/README.build-upstream

@@ -1,78 +0,0 @@
-Building Samba Packages for Debian GNU/Linux
---------------------------------------------
-
-Building Debian packages is not as hard as some people might think.
-The following instructions will allow you to build your own Samba
-Debian packages. These instructions and the files in packaging/Debian/
-should be current as of Samba 3.0.2, and allow you to build Debian
-packages for Debian unstable (so you need some development packages
-available only in Debian unstable.) If you are using something newer
-than 3.0.2 you might want to try to follow the instructions to see if
-patches apply cleanly. If some patches don't apply cleanly please e-mail
-samba@packages.debian.org since we might have fixed patches that we have
-not yet integrated into upstream Samba.
-
-We try to maintain as much compatibility with previous releases
-of Debian as possible, so it is possible that the files in
-packaging/Debian/ can also be used to build Samba Debian packages for
-other Debian releases. However, sometimes this is just not possible
-because we need to use stuff that is only available on Debian unstable.
-
-Instructions
-------------
-
-If you want to build Samba packages for Debian and you just want to use
-upstream sources, i.e. you don't want to wait for us to put official
-packages out, or you want packages for a Debian version for which we
-don't provide deb's, or you don't want to use official packages, or
-you want to add --this-cool-switch to configure, or whatever, follow
-these instructions:
-
-0) Make sure you have the following packages installed (in addition
-to the normal Debian development packages -- dpkg-dev, libc6-dev,
-devscripts, etc.):
-
-  autoconf
-  debhelper (>= 4.1.13)
-  libpam0g-dev
-  libreadline4-dev
-  libcupsys2-dev
-  libacl1-dev, libacl1 (>= 2.2.11-1)
-  libkrb5-dev
-  libldap2-dev
-  po-debconf
-  python2.3-dev
-
-  Notes regarding the packages required to build Samba Debian packages:
-
-  * The libcupsys2-dev is not available in Debian Potato (Debian 2.2).
-    That's fine; the configure script won't detect CUPS support and the
-    resulting binaries won't support CUPS.
-
-  * The list above is current as of samba-3.0.0rc2, but it can get
-    out of date. The best way to check what packages are required to
-    build the samba packages on Debian is to look for the Build-Depends:
-    field in the file debian/control.
-
-1) cd samba[-<version>]. For example, "cd samba-3.0.2".
-2) cp -a packaging/Debian/debian/ .
-  It's important that you copy instead of symlink because the build
-  tools in Potato have a problem that prevents the build to work with
-  a symlink. If you are running a recent Debian distribution you don't
-  have to copy the directory and you can use a symlink instead:
-  "ln -s packaging/Debian/debian/ ."
-3) dch -i (this is completely optional - only do it if you understand
-   Debian version numbers! Don't complain later if you can't upgrade
-   to official versions of the Samba packages for Debian.)
-  - Edit the changelog and make sure the version is right. For example,
-    for Samba 3.0.2, the version number should something like 3.0.2-0.1.
-4) Run 'fakeroot debian/rules binary'.
-5) That's it. Your new packages should be in ../. Install with dpkg.
-
-Please e-mail samba@packages.debian.org with comments, questions or
-suggestions. Please talk to us and not to the Samba Team. They have
-better things to do and know nothing about the Debian packaging system.
-
-Eloy A. Paris <peloy@debian.org>
-Steve Langasek <vorlon@debian.org>
-

packaging/Debian/debian-unstable/README.debian

@@ -1,163 +0,0 @@
-Samba for Debian
-----------------
-
-This package was built by Eloy Paris <peloy@debian.org> and Steve Langasek
-<vorlon@debian.org>, current maintainers of the Samba packages for Debian,
-based on previous work from Bruce Perens <Bruce@Pixar.com>, Andrew
-Howell <andrew@it.com.au>, Klee Dienes <klee@debian.org> and Michael
-Meskes <meskes@topsystem.de>, all previous maintainers of the packages
-samba and sambades (merged together for longer than we can remember.)
-
-Contents of this README file:
-
-1. Notes
-2. Upgrading from Samba 2.2
-3. Packages Generated from the Samba Sources
-4. Support for NT Domains
-5. Reporting bugs
-
-
-1. Notes
---------
-
-- As of Samba 2.0.6-1, the Debian version of Samba is compiled with
-  Pluggable Authentication Modules (PAM) support. PAM support was 
-  discontinued during the libc5 -> libc6 migration process and I never
-  brought it back until 2.0.6-1.
-
-- The smbfs package does not support the 2.0.x Linux kernels anymore.
-  This has been the case since the very first packages of the CVS sources
-  that eventually became Samba 2.2. To use the smbfs package you need to
-  run a 2.2.x kernel or later.
-
-- Starting with the Debian packages for Samba 2.2, the Samba log files (for
-  nmbd and smbd) have been moved to a new location: /var/log/samba/. The
-  files also have new names: log.nmbd and log.smbd. The old files
-  (/var/log/{nmb,smb} were moved to the new location.
-
-
-2. Upgrading from Samba 2.2
----------------------------
-
-Samba 3.0 provides greatly improved support for modern Windows systems,
-including support for Unicode and LDAP.  In the process, Samba 3.0
-necessarily also breaks backward compatiblity with past releases.  These
-issues are documented herein; if you are aware of other problems related
-to upgrading from Samba 2.2, please let us know at
-<samba@packages.debian.org>.
-
-Samba and LDAP
---------------
-Starting with Samba 2.999+3.0cvs20020723-1 we are building Samba with
-LDAP support.  However, the LDAP schema for Samba 3.0 differs
-substantially from the schema used by many sites with Samba 2.2 (not
-enabled in the Debian packages).  If upgrading from an LDAP-enabled 2.2,
-you will need to run the convertSambaAccount script found in
-/usr/share/doc/samba-doc/examples/LDAP.  A copy of the schema itself can
-also be found at /usr/share/doc/samba-doc/examples/LDAP/samba.schema.
-
-Character Sets
---------------
-Samba 3.0 introduces support for negotiating Unicode (UCS-2LE) with
-Windows clients.  Owing to the close similarity between Windows and Unix
-NLS charsets, in the past, many users were able to pass filenames
-containing non-ASCII characters between clients and servers without
-configuring Samba to know what character set was in use.  Now, Samba
-must be able to convert Unix filenames to Unicode before sending to the
-client, so Samba must know what character set the filenames are being
-converted from.  If you will be sharing files with non-ASCII names, and
-the filenames are not encoded with UTF-8, you will need to tell Samba
-which character set to use with the 'unix charset' option.
-
-If you had previously specified 'character set' and 'client code page'
-options under 2.2, these settings should be automatically converted for
-you.
-
-
-3. Packages Generated from the Samba Sources
---------------------------------------------
-
-Currently, the Samba sources produce the following binary packages:
-
-samba: A LanManager like file and printer server for Unix.
-samba-common: Samba common files used by both the server and the client.
-smbclient: A LanManager like simple client for Unix.
-swat: Samba Web Administration Tool
-samba-doc: Samba documentation.
-smbfs: Mount and umount commands for the smbfs (works with 2.2.x and
-	above kernels, not with 2.0.x kernels.)
-libpam-smbpass: pluggable authentication module for SMB password
-	database.
-libsmbclient: Shared library that allows applications to talk to SMB servers.
-libsmbclient-dev: libsmbclient shared libraries.
-winbind: Service to resolve user and group information from a Windows NT 
-	server.
-python2.2-samba: Python bindings that allow access to various aspects of
-	Samba.
-
-Please note that the package smbwrapper (a shared library that provides
-SMB client services that existed between Samba 2.0.0-1 and Samba-2.0.5a-4
-does not exist any more. The reason is that starting with Samba 2.0.6-1, that
-code does not even compile, and the upstream author (Andrew Tridgell)
-recommended to disable the compilation of smbwrapper until some issues
-with glibc2.1 get cleared out (the problem is with glibc, not with Samba
-itself).
-
-
-4. Support for NT Domains
--------------------------
-
-Samba 2.2 includes preliminary support for NT domains. A Samba server
-can now be part of a Windows NT domain whose Primary Domain Controller
-is a Windows NT server. This feature is supposed to be stable although I
-haven't tried it myself. Read the documentation in the samba-doc package
-for help on how to do this (hint: "security = domain" in the smb.conf
-file).
-
-Samba 2.2 has also experimental support for Primary Domain
-Controller. This means that a Samba server can act now as a PDC. There
-are no special flags needed to compile Samba with NT domain PDC
-support. Please read the NTDOM PDC FAQ at www.samba.org (Documentation
-section).
-
-Please note that NT domain PDC support is far from complete and is still 
-experimental.
-
-
-5. Reporting Bugs
------------------
-
-If you believe you have found a bug please make sure the possible bug
-also exists in the latest version of Samba that is available for the
-unstable Debian distribution. If you are running Debian stable this
-means that you will probably have to build your own packages. And if the
-problem does not exist in the latest version of Samba we have packaged it
-means that you will have to run the version of Samba you built yourself
-since it is not easy to upload new packages to the stable distribution,
-unless they fix critical security problems.
-
-If you can reproduce the problem in the latest version of Samba then
-it is likely to be a real bug. Your best shot is to search the Samba
-mailing lists to see if it is something that has already been reported
-and fixed - if it is a simple fix we can add the patch to our packages
-without waiting for a new Samba release.
-
-If you decide that your problem deserves to be submitted to the Debian
-Bug Tracking System (BTS) we expect you to be responsive if we request
-more information. If we request more information and do not receive
-any in a reasonable time frame expect to see your bug closed without
-explanation - we can't fix bugs we can't reproduce, and most of the
-time we need more information to be able to reproduce them.
-
-When submitting a bug to the Debian BTS please include the version of
-the Debian package you are using as well as the Debian distribution you
-are using. Think _twice_ about the severity you assign to the bug: we
-are _very_ sensitive about bug severities; the fact that it doesn't
-work for you doesn't mean that the severity must be such that it holds
-a major Debian release. In fact, that it doesn't work for you it
-doesn't mean that it doesn't work for others. So again: think _twice_.
-
-
-Eloy A. Paris <peloy@debian.org>
-Steve Langasek <vorlon@debian.org>
-

packaging/Debian/debian-unstable/TODO

@@ -1,4 +0,0 @@
-Nothing in our list right now.
-
-Debian Samba Maintainers.-
-Sun Apr  6 01:34:21 EST 2003

packaging/Debian/debian-unstable/config.cache

@@ -1,221 +0,0 @@
-#
-# 22 August 2001  Steve Langasek <vorlon@debian.org>
-#
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs.  It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already.  You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-#
-# This config.cache file contains a list of acceptable autoconf
-# values which can be used in compiling Samba for Debian woody/sid.
-#
-# Autoconf sorts options alphabetically in its output.  This file
-# groups options logically.
-
-
-# Load any architecture-specific settings
-if [ -n "$DEB_HOST_GNU_TYPE" \
-     -a -f ../debian/config.cache.${DEB_HOST_GNU_TYPE} ]; then
-	. ../debian/config.cache.${DEB_HOST_GNU_TYPE}
-fi
-
-
-# This is at the top because it's most in need of regular tweaking.
-# These are options which are supported on 2.4 kernels, but not on 2.2
-# kernels.
-
-samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=${samba_cv_HAVE_KERNEL_OPLOCKS_LINUX=no}
-samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=${samba_cv_HAVE_KERNEL_CHANGE_NOTIFY=no}
-samba_cv_HAVE_KERNEL_SHARE_MODES=${samba_cv_HAVE_KERNEL_SHARE_MODES=no}
-
-
-# These are present in 2.2 kernels, but not in 2.0...
-
-samba_cv_have_setresuid=${samba_cv_have_setresuid=yes}
-samba_cv_have_setresgid=${samba_cv_have_setresgid=yes}
-samba_cv_USE_SETRESUID=${samba_cv_USE_SETRESUID=yes}
-
-
-# Various basic libc/compiler stuff that it's blindingly obvious that
-# Linux supports (now watch me get bitten for saying that)
-
-ac_cv_c_const=${ac_cv_c_const=yes}
-ac_cv_c_inline=${ac_cv_c_inline=inline}
-samba_cv_volatile=${samba_cv_volatile=yes}
-ac_cv_dirent_d_off=${ac_cv_dirent_d_off=yes}
-ac_cv_func_bzero=${ac_cv_func_bzero=yes}
-ac_cv_func_chmod=${ac_cv_func_chmod=yes}
-ac_cv_func_chown=${ac_cv_func_chown=yes}
-ac_cv_func_chroot=${ac_cv_func_chroot=yes}
-ac_cv_func_connect=${ac_cv_func_connect=yes}
-ac_cv_func_dup2=${ac_cv_func_dup2=yes}
-ac_cv_func_execl=${ac_cv_func_execl=yes}
-ac_cv_func_fchmod=${ac_cv_func_fchmod=yes}
-ac_cv_func_fchown=${ac_cv_func_fchown=yes}
-ac_cv_func_fstat=${ac_cv_func_fstat=yes}
-ac_cv_func_fsync=${ac_cv_func_fsync=yes}
-ac_cv_func_ftruncate=${ac_cv_func_ftruncate=yes}
-ac_cv_func_getcwd=${ac_cv_func_getcwd=yes}
-ac_cv_func_getgrent=${ac_cv_func_getgrent=yes}
-ac_cv_func_getgrnam=${ac_cv_func_getgrnam=yes}
-ac_cv_func_getspnam=${ac_cv_func_getspnam=yes}
-ac_cv_func_glob=${ac_cv_func_glob=yes}
-ac_cv_func_grantpt=${ac_cv_func_grantpt=yes}
-ac_cv_func_initgroups=${ac_cv_func_initgroups=yes}
-ac_cv_func_llseek=${ac_cv_func_llseek=yes}
-ac_cv_func_memcmp_clean=${ac_cv_func_memcmp_clean=yes}
-ac_cv_func_memmove=${ac_cv_func_memmove=yes}
-ac_cv_func_memset=${ac_cv_func_memset=yes}
-ac_cv_func_mktime=${ac_cv_func_mktime=yes}
-ac_cv_func_pipe=${ac_cv_func_pipe=yes}
-ac_cv_func_poll=${ac_cv_func_poll=yes}
-ac_cv_func_pread=${ac_cv_func_pread=yes}
-ac_cv_func_pwrite=${ac_cv_func_pwrite=yes}
-ac_cv_func_rand=${ac_cv_func_rand=yes}
-ac_cv_func_random=${ac_cv_func_random=yes}
-ac_cv_func_readlink=${ac_cv_func_readlink=yes}
-ac_cv_func_rename=${ac_cv_func_rename=yes}
-ac_cv_func_select=${ac_cv_func_select=yes}
-ac_cv_func_setenv=${ac_cv_func_setenv=yes}
-ac_cv_func_setgroups=${ac_cv_func_setgroups=yes}
-ac_cv_func_setsid=${ac_cv_func_setsid=yes}
-ac_cv_func_sigaction=${ac_cv_func_sigaction=yes}
-ac_cv_func_sigblock=${ac_cv_func_sigblock=yes}
-ac_cv_func_sigprocmask=${ac_cv_func_sigprocmask=yes}
-ac_cv_func_snprintf=${ac_cv_func_snprintf=yes}
-ac_cv_func_srand=${ac_cv_func_srand=yes}
-ac_cv_func_srandom=${ac_cv_func_srandom=yes}
-ac_cv_func_strcasecmp=${ac_cv_func_strcasecmp=yes}
-ac_cv_func_strchr=${ac_cv_func_strchr=yes}
-ac_cv_func_strdup=${ac_cv_func_strdup=yes}
-ac_cv_func_strerror=${ac_cv_func_strerror=yes}
-ac_cv_func_strftime=${ac_cv_func_strftime=yes}
-ac_cv_func_strpbrk=${ac_cv_func_strpbrk=yes}
-ac_cv_func_strtoul=${ac_cv_func_strtoul=yes}
-ac_cv_func_symlink=${ac_cv_func_symlink=yes}
-ac_cv_func_usleep=${ac_cv_func_usleep=yes}
-ac_cv_func_utime=${ac_cv_func_utime=yes}
-ac_cv_func_utimes=${ac_cv_func_utimes=yes}
-ac_cv_func_vsnprintf=${ac_cv_func_vsnprintf=yes}
-ac_cv_func_waitpid=${ac_cv_func_waitpid=yes}
-ac_cv_type_ino_t=${ac_cv_type_ino_t=yes}
-ac_cv_type_mode_t=${ac_cv_type_mode_t=yes}
-ac_cv_type_pid_t=${ac_cv_type_pid_t=yes}
-ac_cv_type_size_t=${ac_cv_type_size_t=yes}
-ac_cv_type_uid_t=${ac_cv_type_uid_t=yes}
-samba_cv_socklen_t=${samba_cv_socklen_t=yes}
-
-# Yes, we know Linux supports fcntl locking.  Just ignore
-# any errors caused by building on an NFS mount.
-samba_cv_HAVE_FCNTL_LOCK=${samba_cv_HAVE_FCNTL_LOCK=yes}
-
-
-# smbwrapper doesn't work because the glibc maintainers don't want
-# to support transparent userland VFS.  We might as well preempt
-# any checks for shadowed symbols that are only useful for smbwrapper.
-
-ac_cv_func___chdir=${ac_cv_func___chdir=no}
-ac_cv_func__chdir=${ac_cv_func__chdir=no}
-ac_cv_func___close=${ac_cv_func___close=no}
-ac_cv_func__close=${ac_cv_func__close=no}
-ac_cv_func___closedir=${ac_cv_func___closedir=no}
-ac_cv_func__closedir=${ac_cv_func__closedir=no}
-ac_cv_func___dup=${ac_cv_func___dup=no}
-ac_cv_func__dup=${ac_cv_func__dup=no}
-ac_cv_func___dup2=${ac_cv_func___dup2=no}
-ac_cv_func__dup2=${ac_cv_func__dup2=no}
-ac_cv_func___fchdir=${ac_cv_func___fchdir=no}
-ac_cv_func__fchdir=${ac_cv_func__fchdir=no}
-ac_cv_func___fcntl=${ac_cv_func___fcntl=no}
-ac_cv_func__fcntl=${ac_cv_func__fcntl=no}
-ac_cv_func___fork=${ac_cv_func___fork=no}
-ac_cv_func__fork=${ac_cv_func__fork=no}
-ac_cv_func___fstat=${ac_cv_func___fstat=no}
-ac_cv_func__fstat=${ac_cv_func__fstat=no}
-ac_cv_func___fstat64=${ac_cv_func___fstat64=no}
-ac_cv_func__fstat64=${ac_cv_func__fstat64=no}
-ac_cv_func___fxstat=${ac_cv_func___fxstat=no}
-ac_cv_func___getcwd=${ac_cv_func___getcwd=no}
-ac_cv_func__getcwd=${ac_cv_func__getcwd=no}
-ac_cv_func___getdents=${ac_cv_func___getdents=no}
-ac_cv_func__getdents=${ac_cv_func__getdents=no}
-ac_cv_func___llseek=${ac_cv_func___llseek=no}
-ac_cv_func___sys_llseek=${ac_cv_func___sys_llseek=no}
-ac_cv_func__llseek=${ac_cv_func__llseek=no}
-ac_cv_func___lseek=${ac_cv_func___lseek=no}
-ac_cv_func__lseek=${ac_cv_func__lseek=no}
-ac_cv_func___lstat=${ac_cv_func___lstat=no}
-ac_cv_func__lstat=${ac_cv_func__lstat=no}
-ac_cv_func___lstat64=${ac_cv_func___lstat64=no}
-ac_cv_func__lstat64=${ac_cv_func__lstat64=no}
-ac_cv_func___lxstat=${ac_cv_func___lxstat=no}
-ac_cv_func___open=${ac_cv_func___open=no}
-ac_cv_func__open=${ac_cv_func__open=no}
-ac_cv_func___open64=${ac_cv_func___open64=no}
-ac_cv_func__open64=${ac_cv_func__open64=no}
-ac_cv_func___opendir=${ac_cv_func___opendir=no}
-ac_cv_func__opendir=${ac_cv_func__opendir=no}
-ac_cv_func___pread=${ac_cv_func___pread=no}
-ac_cv_func__pread=${ac_cv_func__pread=no}
-ac_cv_func___pread64=${ac_cv_func___pread64=no}
-ac_cv_func__pread64=${ac_cv_func__pread64=no}
-ac_cv_func___pwrite=${ac_cv_func___pwrite=no}
-ac_cv_func__pwrite=${ac_cv_func__pwrite=no}
-ac_cv_func___pwrite64=${ac_cv_func___pwrite64=no}
-ac_cv_func__pwrite64=${ac_cv_func__pwrite64=no}
-ac_cv_func___read=${ac_cv_func___read=no}
-ac_cv_func__read=${ac_cv_func__read=no}
-ac_cv_func___readdir=${ac_cv_func___readdir=no}
-ac_cv_func__readdir=${ac_cv_func__readdir=no}
-ac_cv_func___readdir64=${ac_cv_func___readdir64=no}
-ac_cv_func__readdir64=${ac_cv_func__readdir64=no}
-ac_cv_func___seekdir=${ac_cv_func___seekdir=no}
-ac_cv_func__seekdir=${ac_cv_func__seekdir=no}
-ac_cv_func___stat=${ac_cv_func___stat=no}
-ac_cv_func__stat=${ac_cv_func__stat=no}
-ac_cv_func___stat64=${ac_cv_func___stat64=no}
-ac_cv_func__stat64=${ac_cv_func__stat64=no}
-ac_cv_func___telldir=${ac_cv_func___telldir=no}
-ac_cv_func__telldir=${ac_cv_func__telldir=no}
-ac_cv_func___write=${ac_cv_func___write=no}
-ac_cv_func__write=${ac_cv_func__write=no}
-ac_cv_func___xstat=${ac_cv_func___xstat=no}
-
-
-
-# Miscellaneous stuff that isn't, and shouldn't be, available
-# in Debian.  Those interested in building debs for other systems may
-# need to remove some of these defines.
-
-ac_cv_func_bigcrypt=${ac_cv_func_bigcrypt=no}
-ac_cv_func_crypt16=${ac_cv_func_crypt16=no}
-ac_cv_func_getauthuid=${ac_cv_func_getauthuid=no}
-ac_cv_func_getprpwnam=${ac_cv_func_getprpwnam=no}
-ac_cv_func_getpwanam=${ac_cv_func_getpwanam=no}
-ac_cv_func_putprpwnam=${ac_cv_func_putprpwnam=no}
-ac_cv_func_rdchk=${ac_cv_func_rdchk=no}
-ac_cv_func_set_auth_parameters=${ac_cv_func_set_auth_parameters=no}
-ac_cv_func_setgidx=${ac_cv_func_setgidx=no}
-ac_cv_func_setluid=${ac_cv_func_setluid=no}
-ac_cv_func_setpriv=${ac_cv_func_setpriv=no}
-ac_cv_func_setuidx=${ac_cv_func_setuidx=no}
-ac_cv_lib_sec_bigcrypt=${ac_cv_lib_sec_bigcrypt=no}
-ac_cv_lib_sec_getprpwnam=${ac_cv_lib_sec_getprpwnam=no}
-ac_cv_lib_sec_getspnam=${ac_cv_lib_sec_getspnam=no}
-ac_cv_lib_sec_putprpwnam=${ac_cv_lib_sec_putprpwnam=no}
-ac_cv_lib_sec_set_auth_parameters=${ac_cv_lib_sec_set_auth_parameters=no}
-ac_cv_lib_security_bigcrypt=${ac_cv_lib_security_bigcrypt=no}
-ac_cv_lib_security_getprpwnam=${ac_cv_lib_security_getprpwnam=no}
-ac_cv_lib_security_getspnam=${ac_cv_lib_security_getspnam=no}
-ac_cv_lib_security_putprpwnam=${ac_cv_lib_security_putprpwnam=no}
-ac_cv_lib_security_set_auth_parameters=${ac_cv_lib_security_set_auth_parameters=no}