IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
LDAP connections should time out when the kerberos ticket used to authenticate
expires. Windows does this with a RFC4511 section 4.4.1 message (that as of
August 2020 is encoded not according to the RFC) followed by a TCP disconnect.
ldb sees the section 4.4.1 as a protocol violation and returns
LDB_ERR_PROTOCOL_ERROR.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=14465
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
The last caller was removed by 'r7626: a new ldap client library'
in 2005 with bab977dad76e9204278c7afe0bb905cda064f488.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Change callers to use the passed in TALLOC_CTX *
instead of talloc_autofree_context().
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Böhme <slow@samba.org>
Not currently used - no logic changes inside.
This will make it possible to pass down a long-lived talloc
context from the loading function for modules to use instead
of having them internally all use talloc_autofree_context()
which is a hidden global.
Updated all known module interface numbers, and added a
WHATSNEW.
Signed-off-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Ralph Böhme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Apr 22 01:17:00 CEST 2017 on sn-devel-144
This patch moves the udp netlogon tests from cldap.c
to netlogon.c and passes a generic netlogon-send
function as parameter.
Therefore a tcp replacement for cldap_netlogon is also added.
The two variants tcp and udp are added as 2 new torture tests:
ldap.netlogon-udp & ldap.netlogon-tcp
Both tests succeed.
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Nadezhda Ivanova <nivanova@symas.com>
Looks like an errant copy/paste from the Abandon test.
Signed-off-by: Howard Chu <hyc@symas.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Sep 23 22:47:50 CEST 2013 on sn-devel-104
This is consistent with the test names used by selftest, should
make the names less confusing and easier to integrate with other tools.
Autobuild-User: Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date: Sat Dec 11 04:16:13 CET 2010 on sn-devel-104
This reworks the test to be part of the LDAP tests, to make better use
of the torture API and the ldb API (in particular around adding
controls), and a general cleanup.
This also adds the test to the 'make test' run.
Andrew Bartlett
Make sure we pass around the event_context where we need it instead.
All test but a few python ones fail. Jelmer promised to fix them.
(This used to be commit 3045d391626fba169aa26be52174883e18d323e9)
There are still a few tidyups of old FSF addresses to come (in both s3
and s4). More commits soon.
(This used to be commit fcf38a38ac691abd0fa51b89dc951a08e89fdafa)
isn't updated by originating changes, and that there's no entry for the local
dsa invocation_id
metze
(This used to be commit a9b757dddc496b705d04ee73f52b7f4f16e972e9)
output in the testsuite rather than just True or False for a
set of tests.
The aim is to use this for:
* known failure lists (run all tests and detect tests that
started working or started failing). This
would allow us to get rid of the RPC-SAMBA3-* tests
* nicer torture output
* simplification of the testsuite system
* compatibility with other unit testing systems
* easier usage of smbtorture (being able to run one test
and automatically set up the environment for that)
This is still a work-in-progress; expect more updates over the next couple of
days.
(This used to be commit 0eb6097305776325c75081356309115f445a7218)
library. Even though we don't like to that library, it gets loaded via
nss-ldap, which means nss-ldap calls into the samba ldap lib with the
wrong parameters, and crashes.
We really need to use a completely different namespace in libcli/ldap/
(This used to be commit c440e0eed9afae5fe69995a7416971e7c8560779)
dcerpc_interface_table struct rather then a tuple of interface
name, UUID and version.
This removes the requirement for having a global list of DCE/RPC interfaces,
except for these parts of the code that use that list explicitly
(ndrdump and the scanner torture test).
This should also allow us to remove the hack that put the authservice parameter
in the dcerpc_binding struct as it can now be read directly from
dcerpc_interface_table.
I will now modify some of these functions to take a dcerpc_syntax_id
structure rather then a full dcerpc_interface_table.
(This used to be commit 8aae0f168e54c01d0866ad6e0da141dbd828574f)
- hooked into events system, so requests can be truly async and won't
interfere with other processing happening at the same time
- uses NTSTATUS codes for errors (previously errors were mostly
ignored). In a similar fashion to the DOS error handling, I have
reserved a range of the NTSTATUS code 32 bit space for LDAP error
codes, so a function can return a LDAP error code in a NTSTATUS
- much cleaner packet handling
(This used to be commit 2e3c660b2fc20e046d82bf1cc296422b6e7dfad0)
GENSEC, and to pull SCHANNEL into GENSEC, by making it less 'special'.
GENSEC now no longer has it's own handling of 'set username' etc,
instead it uses cli_credentials calls.
In order to link the credentails code right though Samba, a lot of
interfaces have changed to remove 'username, domain, password'
arguments, and these have been replaced with a single 'struct
cli_credentials'.
In the session setup code, a new parameter 'workgroup' contains the
client/server current workgroup, which seems unrelated to the
authentication exchange (it was being filled in from the auth info).
This allows in particular kerberos to only call back for passwords
when it actually needs to perform the kinit.
The kerberos code has been modified not to use the SPNEGO provided
'principal name' (in the mechListMIC), but to instead use the name the
host was connected to as. This better matches Microsoft behaviour,
is more secure and allows better use of standard kerberos functions.
To achieve this, I made changes to our socket code so that the
hostname (before name resolution) is now recorded on the socket.
In schannel, most of the code from librpc/rpc/dcerpc_schannel.c is now
in libcli/auth/schannel.c, and it looks much more like a standard
GENSEC module. The actual sign/seal code moved to
libcli/auth/schannel_sign.c in a previous commit.
The schannel credentails structure is now merged with the rest of the
credentails, as many of the values (username, workstation, domain)
where already present there. This makes handling this in a generic
manner much easier, as there is no longer a custom entry-point.
The auth_domain module continues to be developed, but is now just as
functional as auth_winbind. The changes here are consequential to the
schannel changes.
The only removed function at this point is the RPC-LOGIN test
(simulating the load of a WinXP login), which needs much more work to
clean it up (it contains copies of too much code from all over the
torture suite, and I havn't been able to penetrate its 'structure').
Andrew Bartlett
(This used to be commit 2301a4b38a21aa60917973451687063d83d18d66)
asn1-tied-to-blocking-sockets code into the ldap client and torture
suite, and out of the generic libs, so nobody else is tempted to use
it for any new code.
(This used to be commit 39d1ced21baeca40d1fca62ba65243ca8f15757e)
In developing a GSSAPI plugin for GENSEC, it became clear that the API
needed to change:
- GSSAPI exposes only a wrap() and unwrap() interface, and determines
the location of the signature itself.
- The 'have feature' API did not correctly function in the recursive
SPNEGO environment.
As such, NTLMSSP has been updated to support these methods.
The LDAP client and server have been updated to use the new wrap() and
unwrap() methods, and now pass the LDAP-* tests in our smbtorture.
(Unfortunely I still get valgrind warnings, in the code that was
previously unreachable).
Andrew Bartlett
(This used to be commit 9923c3bc1b5a6e93a5996aadb039bd229e888ac6)
(vl: we should only sync the parsing code with trunk)
- use hierachical talloc in the ldap client code
metze
(This used to be commit 1e9c0b68ca9ddb28877d45fc1b47653b13a7446d)
try a sasl sealed CompareRequest
abartlet: we need to check how SINGING only can work,
it failed for me:-(
metze
(This used to be commit 1dabd04e265bbc1e8335f816708c2639746d9afd)
does not work yet but we are close currently we send the right data
on wire and fail to decode the answer
(This used to be commit 10baf585821bf1f10a3786045a0965000cdffd12)
added -D parameter to torture to be able to specify:
- user dn
- base dn
- user secret
(This used to be commit 0eaec28f5c511a28764a1d350c2eaaf37272eb62)
