IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
_cluster_is_recovered() is used to check if all the nodes in the
cluster have recovery mode set to NORMAL. This is mainly used just
after recovery to wait till the recovery is over. Instead just check
the recovery mode on node 0.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Add new function delete_ip_from_all_nodes(). Also
ctdb_get_all_pnns().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To do any cleanup before exiting the test, register hooks with
test_cleanup(). Multiple hooks can be registered. All the hooks will
be called before exiting from the test.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This is now achieved by defining functions extra_header() and
extra_footer().
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Some eventscript unit test failures get lost because _passed=false is
set in the tail of a pipe. Add a new function test_fail() and call it
when necessary to ensure the value of _passed is set correctly.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Pair-programmed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Thu Mar 5 07:16:54 CET 2015 on sn-devel-104
This is a gawk extension and can't be used reliably if just running
"awk". It is simple enough to switch to using the standard sub() and
gsub() functions.
The alternative is to switch to explicitly running "gawk". However,
although the eventscripts aren't exactly portable, it is probably
better to move closer to portability than further away.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
These tests simulate a dead node rather than a CTDB failure, so drop
IP addresses when killing a "node" to avoid problems with duplicates.
To cope with a CTDB failure a watchdog would be needed to ensure that
the public IPs are dropped when CTDB dies. Let's not do that now.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Dec 5 23:29:39 CET 2014 on sn-devel-104
Extend select_test_node_and_ips() to set $test_prefix in addition to
$test_ip.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use a variable to allow easy change of this string in case future
logging changes modify the timestamp format or do not support
timestamping.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Some of this implements logic that exists in functions. Some of it is
overly complicated and potentially failure-prone.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The log ringbuffer will probably be removed. The test can be
implemented just as reliably by checking IP assignments using "ctdb
ip".
Update wait_until_ips_are_on_node() to print a more useful log
message.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The "-n all" is wrong.
Simplify the implementation and tighten up some uses of this function.
_select_test_node_and_ips() can't use this function anymore.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The glob functionality is unsed so simplify the code by removing it.
Rename this function to wait_until_ips_are_on_node(). Update all
calls.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
About a year ago a check was added to _cluster_is_healthy() to make
sure that node 0 isn't in recovery. This was to avoid unexpected
recoveries causing tests to fail. However, it was misguided because
each test initially calls cluster_is_healthy() and will now fail if an
unexpected recovery occurs.
Instead, have cluster_is_healthy() warn if the cluster is in recovery.
Also:
* Rename wait_until_healthy() to wait_until_ready() because it waits
until both healthy and out of recovery.
* Change the post-recovery sleep in restart_ctdb() to 2 seconds and
add a loop to wait (for 2 seconds at a time) if the cluster is back
in recovery. The logic here is that the re-recovery timeout has
been set to 1 second, so sleeping for just 1 second might race
against the next recovery.
* Use reverse logic in node_has_status() so that it works for "all".
* Tweak wait_until() so that it can handle timeouts with a
recheck-interval specified.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This one ensures that a newly started node gets an up-to-date tickle
list. Tweak some of the integration test functions to accommodate
this.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
At the moment run_tests.sh has quite fragile argument processing. It
needs that annoying "--" between options and tests. The random
default (mktemp -d) for TEST_VAR_DIR is wrong and is worked around in
various places.
Instead:
* Change the default behaviour to print a summary, add new option -N
to turn off summary, and remove old -s option.
* Change the default behaviour to run integration tests with local
daemons, add new options -c to run on a cluster, remove old -l
option.
* Make $testdir/var the default if the tests are not installed, and
$(mktemp -d ) the default if tests are installed.
* Move the default tests for local/cluster into scripts/run_tests.
run_tests.sh (and the run_cluster_tests.sh symlink) should behave as
before but with slightly more reasonable defaults.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Don't scatter the TEST_LOCAL_DAEMONS logic around the code. Limit it
to the local daemons file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
setup_ctdb() doesn't need to do anything on a cluster. To avoid a
conditional, just override it for local daemons.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This was the start of some refactorisation that was never completed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This hasn't been required for a long time and is probably broken. If
it is needed in future then we know where to find it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This is just a straight move. The clever stuff will follow. :-)
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This currently requires an eventscript to be dynamically installed.
This eventscript is only used to help determine when a monitor event
has occurred. This code is horrible and fragile.
A better way is to just monitor the output of "ctdb scriptstatus".
When changes it changes then a monitor event has occurred.
Also remove the old code that checks for tickle information in shared
storage. CTDB hasn't done things this way for a long time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This makes scripts called in the unit tests behave like
when called from ctdbd which ignodes SIGPIPE.
This also makes the scrips behave the same when
called from "make autotest" directly and via autobuild (python).
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Using a variable is too fragile, so use a function instead.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Also match $TEST_VAR_DIR in the socket name. This means that we'll
only ever kill ctdbd process belong to our own test run.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Currently it only passes the last (non -v) option seen. It should
pass them all.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Use /var/run/ctdb/ctdbd.socket because there might be other daemons
that need sockets in the future.
The local daemons test code to create a link for the default
convenience socket has to be removed because the link can't be created
as a regular user in the new location. This should be OK since all
calls to the ctdb tool in the test code should be wrapped in onnode.
When debugging tests, a developer will have to set CTDB_SOCKET by
hand.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Pair-programmed-with: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit dc67a4e24af9d07aead2a1710eeaf5d6cc409201)
Behaves like mkdir -p.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit afe2145d91725daf1399f0a24f1cddcf65f0ec31)
Allowing people to put random options in CTDB_OPTIONS complicates some
logic (particularly around use of syslog). If we're going to have
variables for options then let's make sure we have a variable for each
option and make people use them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit e55f3a1577eff0182802b0341d865d961aeae1c7)
* --public-interface is not needed
* Add --sloppy-start to speed up restarts
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit d0dec5b8e60316701fdd02150c4dd8f01aacbfda)
Regardless of whether a summary is being printed!
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit a69e03a5e4671e998d45b4fef8611a421bbdb3e1)
Refactor the NFS test setup/cleanup code into new common functions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 29e98017221326bdc9b1c4f7c05b3b495c1de29b)
Also check that we're not in recovery mode.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit b7aaa28b3a6a2de923417f3d143f8d516447711e)
