IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
On receiving a special NBT packet (e.g. session setup) the samba daemon
effectively sets up SMB1 as the negotiated protocol (in terms of
software handling of the messages) even though no SMB protocol
has yet been negotiated. If the next message after the nbt session setup
is a SMB2 message it will be handled by the SMB1 callbacks and will be
rejected. This is evident when using smbclient (with -p 139) option
in an env where SMB1 cannot be negotiated [*]
This change doesn't set up the SMB1 callbacks on receipt of NBT special
messages but lets the generic callback in place. Once either SMB1 (or)
SMB2 is established (by receipt of a 'real' SMB or >=SMB2 message) then
the proper callbacks will be set as normal.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Thu Dec 5 18:44:40 UTC 2019 on sn-devel-184
net_rpc_check was hardcoded to check for rpc using SMB1 only. We
should negotiate protocols based on the client max|min protocol settings
this commit also removes the entry for
samba3.blackbox.net.misc.lookup share list
from knownfails as this test should now pass following this change.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Adding a test for the net share list command. Currently this
command will fail because of a bug in the net command when it tries
to see if rpc is supported. This change adds a known fail to swallow
this error. A future commit will fix the net command and remove the
known fail
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
net time ... cmd ignores any configuration to do with min/max protocols
and connects allways with smb1
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.smbclient_s3 passes NT1 or SMB3 to run tests however
the PROTOCOL param is not used consistently within the script which
results in NT1 and SMB3 traffic being produced during testing. This
obviously causes issues when running the tests in an test environment
where SMB1 cannot be negiotiated. These changes fix this
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.smbclient_ntlm.plain used test SMB3 & NT1 protocols
in one test. These changes:
* modify the test driver script test_smbclient_ntlm.sh to take a
protocol as param
* modify the test description generators to pass NT1 & SMB3
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
adjust test generators to run SMB1 & >=SMB2 versions of
samba3.blackbox.preserve_case test.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
test_preserve_case.sh tests a range of protocols, this however
fails when running against the normal test env (which have min
protocol of SMB2) because one of the protocols is NT1. This change
allows tests to pass the protocol (or list of protocols) so that
tests can be split.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.net.misc now can run with >=SMB2 or SMB1 protocols,
adjust previous test definition and add new one
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.dfree_quota was almost exclusively a SMB3 test, only
one part was testing legacy SMB1 behaviour, this change splits this
out so the SMB1 part can be run independantly.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
modify test_net_misc.sh to accept optional protocol, no protocol
specified and it behaves more or less as before (expect this time the
client max protocol is explicitly speficied)
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
samba3.blackbox.dfree_command was a single test that run both NT1 &
SMB3 tests together. This allow the protocol to be passed into the test
script so the test can be divided into SMB1 & >=SM2 tests.
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
The previous approach of using ls | grep $NAME for testing whether the previous
directory removal succeeded will fail in case $NAME is a substring of any
directory entrie's name.
Eg
NAME=tmp.123
and the directory contains an unrelated entry
tmp.123456
Using allinfo instead should fix this.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Isaac Boukris <iboukris@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Dec 5 17:13:36 UTC 2019 on sn-devel-184
We are setting ldb_debug_string() as the ldb debug function. The context
we give it is only valid as long as we're in that function.
On failure, we jump to the teardown function. The pointer for
debug_string isn't valid anymore, but the ldb debug system still points
to that address, and when we store the location of the allocated string,
we overwrite memory, in that case something from talloc and a
talloc_free() then jumps into the nirvana.
Thanks to Florian Weimer who helped debugging this.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Isaac Boukris <iboukris@samba.org>
Otherwise we can end up with negprot.done set, but
without smbXsrv_connection_init_tables() being called.
This can cause a client self-crash.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14205
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Dec 4 21:27:24 UTC 2019 on sn-devel-184
That way the caller can know if the negprot really
succeeded or not.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14205
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
These methods are not used or usable as exported functions. The
correct (and actual) usage is along these lines;
require Parse::Pidl::Samba3::ClientNDR;
my $generator = new Parse::Pidl::Samba3::ClientNDR();
my ($c_code,$h_code) = $generator->Parse($ndr, $header, $c_header);
where the methods are either explicitly referenced (new A::B::C),
or are called from the blessed object, neither of which need
exporting.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Dec 4 06:35:06 UTC 2019 on sn-devel-184
rather than ->{ret}, meaning this class can be moved to a Pidl::Base subclass
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This function was clearly meant to be adding output to both the .c and
.h files, but was only adding it to the .h due to a typo.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The common case is for pidl_hdr() to add a "\n", which we can
easily do here, allowing this to be merged into the Pidl::Base borg.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We need to modify the '@ISA = ' line, because it overwrites
the inheritance from Pidl::Base.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It can sometimes be hard to tell which bit of pidl generated which bit
of C. This commit wants to help.
If the PIDL_DEVELOPER environment variable is set (via waf
--pidl-developer or some other means), pidl will annotate *most* C
indicating which lines were generated by which bits of pidl. It looks
something like this:
_PUBLIC_ enum ndr_err_code ndr_push_auth_session_info(struct ndr_push *ndr, int ndr_flags, const struct auth_session_info *r)
{ //:PIDL: Parse::Pidl::Samba4::NDR::Parser::ParseTypePushFunction lib/Parse/Pidl/Samba4/NDR/Parser.pm:3079
NDR_PUSH_CHECK_FLAGS(ndr, ndr_flags); //:PIDL: Parse::Pidl::Samba4::NDR::Parser::ParseStructPush lib/Parse/Pidl/Samba4/NDR/Parser.pm:604
if (ndr_flags & NDR_SCALARS) {
NDR_CHECK(ndr_push_align(ndr, 5)); //:PIDL: Parse::Pidl::Samba4::NDR::Parser::ParseStructPushPrimitives lib/Parse/Pidl/Samba4/NDR/Parser.pm:1448
NDR_CHECK(ndr_push_unique_ptr(ndr, r->security_token)); //:PIDL: Parse::Pidl::Samba4::NDR::Parser::ParsePtrPush lib/Parse/Pidl/Samba4/NDR/Parser.pm:604
NDR_CHECK(ndr_push_unique_ptr(ndr, r->unix_token));
NDR_CHECK(ndr_push_unique_ptr(ndr, r->info));
NDR_CHECK(ndr_push_unique_ptr(ndr, r->unix_info));
NDR_CHECK(ndr_push_uint3264(ndr, NDR_SCALARS, 0));
/* [ignore] 'torture' */ //:PIDL: Parse::Pidl::Samba4::NDR::Parser::ParseElementPushLevel lib/Parse/Pidl/Samba4/NDR/Parser.pm:729
NDR_CHECK(ndr_push_DATA_BLOB(ndr, NDR_SCALARS, r->session_key)); //:PIDL: Parse::Pidl::Samba4::NDR::Parser::ParseDataPush lib/Parse/Pidl/Samba4/NDR/Parser.pm:604
NDR_CHECK(ndr_push_uint3264(ndr, NDR_SCALARS, 0)); //:PIDL: Parse::Pidl::Samba4::NDR::Parser::ParsePtrPush lib/Parse/Pidl/Samba4/NDR/Parser.pm:604
/* [ignore] 'credentials' */ //:PIDL: Parse::Pidl::Samba4::NDR::Parser::ParseElementPushLevel lib/Parse/Pidl/Samba4/NDR/Parser.pm:729
The comments starting with '//:PIDL:' have the function name, the filename,
and line number. The comment follows the ordinary output, and uses the '//'
style so as not to interfere with multiline /* */ comments if they happen
to exist.
A '//:PIDL:' comment is added whenever the pidl function or indentation
level changes, and very occasionally at other places if pidl runs for a
while without either of these things happening.
This does not affect pidl parsers that do not inherit from Parse::Pidl::Base,
and is careful to have no performance impact on non-debug generation.
This may help with semi-automated flow analysis.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
There are about 5 object-oriented parsers, all with their own
effectively identical but differently spelt versions of pidl(),
pidl_hdr(), indent(), and deindent(). With this commit we add a base
class that they can all use.
The ultimate aim is to be able to add some debugging instrumentation
that benefits all[1] the parsers.
[1] The parsers (e.g. Samba::ServerNDR) which use global scope rather
than objects will not be affected.
The versions of the functions in this file follow the most
sophisticated versions of the soon-to-be subclasses. For example, the
pidl() function avoids spurious whitespace and puts #define at column
0, following the Python parser.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The METH_KEYWORDS argument must always be combined with METH_VARARGS.
In Python up to 3.7 this was checked at runtime, and as we had no callers to
get_unix_path() in Python we never noticed. In Python 3.8 it is checked at
import time, and everyone notices even if they aren't directly using GPOs.
Found and reported by Val Kulkov.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14209
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Without this protection we will spin during decode of a string_array or nstring_array
that is terminated by only a single NUL byte, not two as required by UTF-16.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13874
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Tests to ensure that ndr_pull_string handles zero and one byte length
data correctly for both character strings and UTF-16 strings.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13874
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Fuzzing by Michael Hanselmann found an infinite loop parsing a malformed
supplemental credentials structure. There are no server-side
network-accessible calls using this code.
This patch adds an ndrdump blackbox test to replicate the issue.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=13874
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
source4/heimdal_build/include/ contains public headers,
which are needed by callers.
source4/heimdal_build/*.h should only be used for building the
in tree heimdal itself.
Without this an '#include "replace.h"' can catch 'config.h' from
source4/heimal_build/config.h before bin/default/include/config.h.
This #defines HAVE_CLOSEFROM unconditionally before replace.h can define
the replacement for rep_closefrom() on systems without libbsd.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Tue Dec 3 23:36:17 UTC 2019 on sn-devel-184
Did this ever really work?
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Dec 2 22:47:24 UTC 2019 on sn-devel-184
Don't need to panic, we can do explicit checks in these few callers
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Martin Schwenke <martins@samba.org>
This fixes a cross-compilation issue, as cross-compilers (rightly)
complain if host include directories are in the include path.
The fix is taken from buildroot (8b11b96f41/package/samba4/0006-heimdal_build-wscript_build-do-not-add-host-include-.patch) where it was applied by Bernd Kuhls <bernd.kuhls@t-online.de>.
This reverts some of 3fe2bfddda, but
building Samba's bundled Heimdal with a system roken is not supported
anyway.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13856
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sun Dec 1 10:22:01 UTC 2019 on sn-devel-184
