IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
When we created the backup-file for the restoredc/renamedc/labdc
testenvs we weren't explicitly a --configfile on the samba-tool command.
This meant the command tried to use the smb.conf form the default
install location, i.e. /usr/local/samba/etc/smb.conf. On the gitlab CI
runner, there's no samba installed, so it ends up using the default
settings, which is fine. However, if the host machine had an invalid
smb.conf installed there, creating the testenv would fail with an error
like:
ERROR(runtime): uncaught exception - Unable to load default file
File "bin/python/samba/netcmd/__init__.py", line 184, in _run
return self.run(*args, **kwargs)
File "bin/python/samba/netcmd/domain_backup.py", line 222, in run
lp = sambaopts.get_loadparm()
File "bin/python/samba/getopt.py", line 94, in get_loadparm
self._lp.load_default()
We can avoid this by always explictly specifying the backupfromdc's
smb.conf when creating the backup file.
Likewise, labdc/customdc also need the config specified when the admin
password is reset.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
We always need to specify "env->{CONFIGURATION}" when running a samba-tool
command to setup a testenv. Add a note to the README as this wasn't at
all clear.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Fix fallout from the KDC prefork patchset (99aea42520fc..).
GCC warns when Samba is being built with --with-system-mitkrb5.
Fix this by adapting the signature of mitkdc_task_init() to match
task_init which has been extended to return a status code.
Status codes try to mimick those of kdc-heimdal.c:kdc_task_init()
as closely as possible.
Signed-off-by: Philipp Gesang <philipp.gesang@intra2net.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Nov 9 03:49:55 CET 2018 on sn-devel-144
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Nov 8 11:03:11 CET 2018 on sn-devel-144
This fixes a segfault in pyglue:
==10142== Process terminating with default action of signal 11 (SIGSEGV)
==10142== Bad permissions for mapped region at address 0x6F00A20
==10142== at 0x6F1074B: py_set_debug_level (pyglue.c:165)
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13679
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Nov 7 21:17:59 CET 2018 on sn-devel-144
Allow the rpc_server to run in the prefork process model. Due to the use
of shared handles and resources all of the rpc end points are serviced
in the first worker process. Those end points that can be run in
multiple processes (currently only Netlogon and management) are serviced in
the first and any subsequent workers.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Pass the instance number to the post_fork hook. This is required to
allow the rpc_server to support the prefork process model.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Increase the default number of worker processes started by the pre-fork
process model from 1 to 4.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Convert the ad_dc environment from single process model to the prefork
process model.
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
generate_users_and_groups() now generates the machine acounts as well as
the user accounts, so it seems there's no need to also have
generate_traffic_accounts(), which does the same job.
Instead, we can just pass through the number of machine acounts to
generate_users_and_groups() and delete the other function.
Also updated generate_users_and_groups() so that machine_accounts is
no longer optional (we want to create machine accounts in all cases).
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Generate separate machine accounts for populating a large DB vs
replaying network traffic.
We want to use different userAccountControl flags in each of the above
cases (i.e. commit 3338a3e257). However, this means that once you
use the --generate-users-only option, you can't replay network packets
against the machine accounts.
We can avoid this problem by creating separate machine accounts for each
of 2 different cases, e.g. STGM-0-x machines for traffic-replay, and
PC-0-x machines for padding out the database.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The traffic_replay group/user/machine account names follow a standard
format. This adds a function to generate the machine-name. It also makes
sure the existing user_name() function gets called in all applicable
places.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We create machine accounts for 2 different purposes:
1). For traffic generation, i.e. testing realistic network packets.
2). For generating a realistic large DB.
Unfortunately, we want to use different userAccountControl flags for
the 2 different cases. Commit 3338a3e257 changed the flags used
for case #2, but this breaks case #1.
The problem is generate_users_and_groups() is called in both cases,
so we want the 'traffic account' flag passed into that function.
This ensures that the machine accounts get created with the appropriate
userAccountControl flags for the particular case you want to test.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
I was assuming that generate_users_and_groups() only gets called in the
--generate-users-only case. However, it also gets called in the default
traffic replay case.
This patch reworks the code so that the number of machine accounts to
create gets passed in, and the 'create 25% more computers than users'
assumption only applies to the --generate-users-only case.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
A few of the gpo commands use an identical temporary directory structure
that can be constructed using shared code.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This still doesn't cover all the testenvs comprehensively, but it
pretty much exhausts my knowledge of what the various testenvs do.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Douglas Bagnall <dbagnall@samba.org>
Autobuild-Date(master): Wed Nov 7 04:39:05 CET 2018 on sn-devel-144
Also documented the other backup/restore testenvs as well.
Signed-off-by: Tim Beale <timbeale@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
tdb->max_dead_records is "int", as is the corresponding parameter to
tdb_set_max_dead(). Not that a signed variable makes any sense, but
this is old code and tdb_set_max_dead() is a public API which we
should not change for this.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Nov 6 21:52:32 CET 2018 on sn-devel-144
This solves the problem that gencache never shrinks right
now. Whenever we write an entry, we now walk that entry's chain and
delete expired entries. This should be a good balance between
performance and cleanup actions: Reading is still unaffected, and
those who write pay a small penalty while keeping gencache size under
control.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
At more than one large site I've seen significant problems due to
gencache_stabilize. gencache_stabilize was mainly introduced to
survive machine crashes with the cache still being in place. Given
that most installations crash rarely and this is still a cache, this
safety is overkill and causes real problems.
With the recent changes to tdb, we should be safe enough to run on
completely corrupted databases and properly detect errors. A further
commit will introduce code that wipes the gencache.tdb if such a
corruption is detected.
There is one kind of corruption that we don't properly handle:
Orphaned space in the database. I don't have a good idea yet how to
handle this in a graceful and efficient way during normal operations,
but maybe this idea pops up at some point.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This covers key, timestamp and data. This will detect silent
corruption of gencache data after a system crash
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Two reasons:
The ascii conversion shows up on profiles.
In a further commit we will get checksums for gencache entries to
protect at hidden corruption due to a crash on the non-transactioned
gencache.tdb. Next to the timestamp this is a second field that is
gencache metadata, and I don't want to deal with a second ascii number
when at least some of the gencache values are binary already.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is a prerequisite to allow gencache to run on a non-transactioned
database with mutexes.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is a lightweight readonly traverse of a single chain, see the
comment in the header file.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Explicitly background ctdbd instead.
This has the advantage of leaving stdin open. ctdbd can then be
enhanced to exit when stdin closes, allowing better cleanup in a test
environment.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Nov 6 10:30:14 CET 2018 on sn-devel-144
popt uses an int in place of a bool, so declare an extra int and make
the conversion explicit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These aren't used by simple tests but they will be useful for
integrating ctdbd local daemons into other test suites and for
debugging.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The etc-ctdb/ subdirectory containing the event script moves into the
top-level tests/ directory because the subdirectory is really now
owned by local_daemons.sh instead of simple/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This provides a separate script for handling local daemons. It can be
used for testing outside of the CTDB simple test suite. It is
installed as ctdb_local_daemons.
The logic is copied from ctdb/tests/simple/scripts/local_daemons.bash.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Always create an empty event script directory. If $TEST_SUBDIR is
unset then don't use it to look for etc-ctdb/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Don't calculate this locally as _tools_dir. Add it to PATH
unconditionally - this may result in duplicate entries in PATH but the
resulting code is simpler.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Don't calculate this locally as _test_bin_dir. Just calculate
top_dir, source script_install_paths.sh and use
$CTDB_SCRIPT_TESTS_BINDIR.
Don't bother sanity checking if TEST_BIN_DIR is set. It will go away
soon.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdb_test_init() now passes any arguments to setup_ctdb().
Update tests that have custom local daemon configuration to call
ctdb_test_init() directly. Remove the redundant, initial call to
ctdb_test_init() to avoid starting the cluster an extra time.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This no longer does anything. Integration test cases now start and
shut down the cluster.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The remainder of the scheduled restart logic is about to be removed,
so produce debugging information any time the cluster is not healthy.
While here, reindent and drop the else since there is already an early
return before it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
