IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
(based on Simo's code in trunk). Rewritten with the
following changes:
* privilege set is based on a 32-bit mask instead of strings
(plans are to extend this to a 64 or 128-bit mask before
the next 3.0.11preX release).
* Remove the privilege code from the passdb API
(replication to come later)
* Only support the minimum amount of privileges that make
sense.
* Rewrite the domain join checks to use the SeMachineAccountPrivilege
instead of the 'is a member of "Domain Admins"?' check that started
all this.
Still todo:
* Utilize the SePrintOperatorPrivilege in addition to the 'printer admin'
parameter
* Utilize the SeAddUserPrivilege for adding users and groups
* Fix some of the hard coded _lsa_*() calls
* Start work on enough of SAM replication to get privileges from one
Samba DC to another.
* Come up with some management tool for manipultaing privileges
instead of user manager since it is buggy when run on a 2k client
(haven't tried xp). Works ok on NT4.
(This used to be commit 77c10ff9aa)
The old #ifdef JRATEST-block was copying 16 bytes and thus overwriting
acct_flags with bizarre values, breaking a lot of things.
This patch is successfully running in a production environment for quite
some time now and is required to finally allow Exchange 5.5 to access
another Exchange Server when both are running on NT4 in a
samba-controlled domain. This also allows Exchange Replication to take
place, Exchange Administrator to access other Servers in the network,
etc. Fixes Bugzilla #1136.
Thanks abartlet for helping me with that one.
Guenther
(This used to be commit bd4c5125d6)
functions so we can funnel through some well known functions. Should help greatly with
malloc checking.
HEAD patch to follow.
Jeremy.
(This used to be commit 620f2e608f)
abartlet, I'd like to ask you to take a severe look at this!
We have solved the problem to find the global groups a user is in twice: Once
in auth_util.c and another time for the corresponding samr call. The attached
patch unifies these and sends them through the passdb backend (new function
pdb_enum_group_memberships). Thus it gives pdb_ldap.c the chance to further
optimize the corresponding call if the samba and posix accounts are unified by
issuing a specialized ldap query.
The parameter to activate this ldapsam behaviour is
ldapsam:trusted = yes
Volker
(This used to be commit b94838aff1)
In auth_winbind, remove the push_utf8 calls, as this is no longer a
UTF8 interface. (Removed from everywhere else earlier).
Tested with ASCII - I tried to load the weird charset for testing, but
it doesn't seem to work any more.
Andrew Bartlett
(This used to be commit cb27c197ee)
setups on its way to open a pipe. This gets rid of many round-trips to the
LDAP server during logon by setting up the server_info_guest once and not
asking the LDAP server and nss every time. Make sure that the ldap connection
is reopened in the child. (I did not look at the sql backends.)
Volker
(This used to be commit 3298f6105e)
Use the fully qualified DOMAIN\user format for 'security = domain|ads'
and apply after authentication has succeeded.
* also change fill_domain_username() to only lowercase the username
and not the domain+username. This was a cosmetic fix only.
makes the output more consistent with %D and %U.
(This used to be commit 30ee2d5b09)
On systems with /dev/urandom, this avoids a change to secrets.tdb for every fork().
For other systems, we now only re-seed after a fork, and on startup.
No need to do it per-operation. This removes the 'need_reseed'
parameter from generate_random_buffer().
Andrew Bartlett
(This used to be commit 36741d3cf5)
for setting up an schannel connection. This solves the problem
of a Samba DC running winbind, trusting a native mode AD domain,
and needing to enumerate AD users via wbinfo -u.
(This used to be commit e9f109d1b3)
For a (very) long time, we have had a bug in Samba were an NTLMv2-only
PDC would fail, because it converted the password into NTLM format for
checking.
This patch performs the direct comparison required for interactive
logons to function in this situation. It also removes the 'auth flags', which
simply where not ever used.
Natrually, this plays with the size of structures, so rebuild, rebuild
rebuild...
Andrew Bartlett
(This used to be commit 9598593bcf)
DNS names (realms) from NetBIOS domain names.
Until now, we would experience delays as we broadcast lookups for DNS names
onto the local network segments.
Now if DNS comes back negative, we fall straight back to looking up the
short name.
Andrew Bartlett
(This used to be commit 32397c8b01)
- Fill in the 'backup' idea of a domain, if the DC didn't supply one. This
doesn't seem to occour in reality, hence why we missed the typo.
lib/charcnv.c:
lib/smbldap.c:
libads/ldap.c:
libsmb/libsmbclient.c:
printing/nt_printing.c:
- all the callers to pull_utf8_allocate() pass a char ** as the first
parammeter, so don't make them all cast it to a void **
nsswitch/winbind_util.c:
- Allow for a more 'correct' view of when usernames should be qualified
in winbindd. If we are a PDC, or have 'winbind trusted domains only',
then for the authentication returns stip the domain portion.
- Fix valgrind warning about use of free()ed name when looking up our
local domain. lp_workgroup() is maniplated inside a procedure that
uses it's former value. Instead, use the fact that our local domain is
always the first in the list.
Andrew Bartlett
(This used to be commit 494781f628)
subsystem into a seperate file - ntlm_check.c.
This allows us to call these routines from ntlm_auth. The purpose of this
exercise is to allow ntlm_auth (when operating as an NTLMSSP server) to
avoid talking to winbind. This should allow for easier debugging.
ntlm_auth itself has been reorgainised, so as to share more code between
the SPNEGO-wrapped and 'raw' NTLMSSP modes. A new 'client' NTLMSSP mode
has been added, for use with a Cyrus-SASL module I am writing (based on vl's
work)
Andrew Bartlett
(This used to be commit 48315e8fd2)
The next move will be to remove our password checking code from the SAM
authentication backend, and into a file where other parts of samba can use
it.
The ntlm_auth changes provide for better use of common code.
Andrew Bartlett
(This used to be commit 2375abfa00)
free() each auth method. (We had relied on the use of talloc() only, despite providing the free() callback)
Andrew Bartlett
(This used to be commit 5872c0e26e)
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0d)
in iconv.c and nsswitch/). Using them means you're not thinking about multibyte at
all and I really want to discourage that.
Jeremy.
(This used to be commit d7e35dfb92)
sesssetup to fall back to 'user' instaed of failing is REA.LM\user
doesn't exist.
also fix include line in smb_acls.h as requested by metze
(This used to be commit 62ed2598b3)
restored on next valid packet if a logon fails. This has relevence
if people are using su.exe within logon scripts !
Jeremy.
(This used to be commit d405a93a9d)
Use winbindd to get the group list if possible since we already
know it from netsamlogon_cache.tdb. More effecient than letting
libc call getgrent() to get seconary groups.
Tested by Ken Cross.
(This used to be commit 3c537c906f)
