IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Pair-Programmed-With: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
'dest_realm' is only valid in the winbindd use case, where we also have
the account in that realm.
We need to ask the DC to which KDC the principal belongs to, in order to
get the potential trust referrals right.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
It's enough to pass down target_service and target_hostname, that's all we
have at the smb layer. The kerberos layer should figure out what
the final target_principals is based on the users realm.
The gse_krb5 backend doesn't use it currently, so it's also unused.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
The spnego backend will take the "client use spnego principal" option.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This separates the construction of the ASCII-Password (lm_response)
and UNICODE-Password (nt_response) values from the marshalling logic.
We don't need the NT1 marshalling logic 3 times (guest, plain, nt1),
we just need it once now in smb1cli_session_setup_nt1*.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This separates the spnego authentication logic from the
marshalling logic.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
There're no callers which tried to pass raw {lm,nt}_response any more.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Fixes CID 242325 - dir state and the talloc frame are leaked on
user_auth_info_init() failure.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Oct 26 00:58:41 CEST 2016 on sn-devel-144
add a service routine that builds FILE_FS_CONTROL_INFORMATION
with default quota and flags. This will be reused by SMB2 and
by server code.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add a function to build a FILE_QUOTA_INFORMATION buffer
out of a quota list, and a function that adds a record
to a quota list.
Some parameters of the new functions are unused by
client code, but will be used by server code.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
In preparation for SMB2 support, take parsing of the return
buffer into a separate function.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add some checks for validity of the offset in
the return buffer.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Split cli_list_user_quota into an outer loop function and
an inner loop function.
This simplifies the code somewhat, paves the way for SMB2
support, and fixes a couple of memory leaks in error
conditions. No functional changes.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add a wrapper function arounf GET_INFO to obtain
file system attributes, and plumb it in.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This avoids dereferencing a null pointer if there's
an attempt to free an empty list.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12307
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
When listing quota records, a Windows server would
return STATUS_SUCCESS until no more entries are available,
where it would return STATUS_NO_MORE_ENTRIES.
The fix keeps old behavior of empty answer also signifying
end of record, to maintain compatibility with Samba servers.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12270
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12166
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Aug 22 22:59:22 CEST 2016 on sn-devel-144
Not yet used - we will use these to construct the SMB2 TWrp blob.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12166
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Wed Jul 6 22:41:41 CEST 2016 on sn-devel-144
We already trim any leading \\ characters in this function, so this is the simplest place
to clean the pathname.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11986
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
Autobuild-User(master): Uri Simchoni <uri@samba.org>
Autobuild-Date(master): Wed Jun 22 10:33:29 CEST 2016 on sn-devel-144
Note: This has *NO* effect on the lock context code, as on the
wire for all SMB1 locking requests, the pid used as the lock
context is already truncated down to 16-bits - the field is only
16-bits wide.
This allows the cli_XXX() calls to correctly set pidlow AND pidhigh
in SMB1 requests put on the wire by the libcli/smb/smb1*.c code.
Note that currently the smbd server doesn't correctly return
pidhigh yet - a fix (and tests) for that will follow.
As pidhigh is not checked in any client code (mid is used
to differentiate different requests) this has no effect
other than a correctness fix.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
This whole area is a known-to-be-broken mess, but this patch should fix
the immediate crash
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Tue Jun 7 18:31:30 CEST 2016 on sn-devel-144
Will add as a command to smbclient, plus will be useful for testing.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
Windows servers will refuse trans2 requests which use excessive
request parameters. From [MS-CIFS|:
<239> Section 3.3.5.2.5: Windows NT servers fail a transaction request with
STATUS_INSUFF_SERVER_RESOURCES, if (SetupCount + MaxSetupCount +
TotalParameterCount + MaxParameterCount + TotalDataCount + MaxDataCount)
is greater than 65*1024.
When attempting to set a large list of EAs for a file, this limit can be
hit when using CLI_BUFFER_SIZE as MaxDataCount
while the TRANS2_SET_PATH_INFORMATION response has no data reply,
only parameters (section 2.2.6.7.2).
Be as minimal as possible here to allow a maximum number of EAs to
be written.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=11354
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Christian Ambach <ambi@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed May 11 18:35:59 CEST 2016 on sn-devel-144
The SMB2 file handling code wasn't correctly setting raw_status, which
is used by libsmbclient to report file open errors etc.
https://bugzilla.samba.org/show_bug.cgi?id=11276
Signed-off-by: Robin McCorkell <robin@mccorkell.me.uk>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This makes the authentication consistent between
SMB1 with CAP_EXTENDED_SECURITY (introduced in Windows 2000)
and SNB2.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11841
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
smbtorture with the libsmbclient test suite produces the following valgrind
trace
==31432== Invalid read of size 8
==31432== at 0x99B8858: smbc_free_context (libsmb_context.c:260)
==31432== by 0x5E6401: torture_libsmbclient_opendir (libsmbclient.c:136)
==31432== by 0x9553F42: wrap_simple_test (torture.c:632)
==31432== by 0x955366F: internal_torture_run_test (torture.c:442)
==31432== by 0x95538C3: torture_run_tcase_restricted (torture.c:506)
==31432== by 0x9553278: torture_run_suite_restricted (torture.c:357)
==31432== by 0x95531D7: torture_run_suite (torture.c:339)
==31432== by 0x25FEFF: run_matching (smbtorture.c:93)
==31432== by 0x260195: torture_run_named_tests (smbtorture.c:143)
==31432== by 0x261E14: main (smbtorture.c:665)
==31432== Address 0x18864a70 is 80 bytes inside a block of size 96 free'd
==31432== at 0x4C2A37C: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==31432== by 0x99BCC46: SMBC_closedir_ctx (libsmb_dir.c:922)
==31432== by 0x99C06CA: SMBC_close_ctx (libsmb_file.c:370)
==31432== by 0x99B8853: smbc_free_context (libsmb_context.c:259)
==31432== by 0x5E6401: torture_libsmbclient_opendir (libsmbclient.c:136)
==31432== by 0x9553F42: wrap_simple_test (torture.c:632)
==31432== by 0x955366F: internal_torture_run_test (torture.c:442)
==31432== by 0x95538C3: torture_run_tcase_restricted (torture.c:506)
==31432== by 0x9553278: torture_run_suite_restricted (torture.c:357)
==31432== by 0x95531D7: torture_run_suite (torture.c:339)
==31432== by 0x25FEFF: run_matching (smbtorture.c:93)
==31432== by 0x260195: torture_run_named_tests (smbtorture.c:143)
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11836
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu Apr 14 13:24:10 CEST 2016 on sn-devel-144
Use SMB_SIGNING_IPC_DEFAULT and lp_client_ipc_{min,max}_protocol() for RPC connections.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11756
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
We need NT1 => LATEST in order to work against all servers which support
DCERPC over ncacn_np.
This is a mini step in using SMB2/3 in our client side by default.
This gives us a higher chance that SMB signing is supported by the
server (as it can't be turned off for SMB2 and higher).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11756
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
SMB_SIGNING_IPC_DEFAULT must be used from s3 client code when opening
RPC connections.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11756
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reported by Thomas Dvorachek <tdvorachek@yahoo.com> from a Windows 10 server.
Confirmed in MS-CIFS 2.2.8.1.7.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11822
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Apr 6 03:46:55 CEST 2016 on sn-devel-144
This pares a fix for https://bugzilla.samba.org/show_bug.cgi?id=10288
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
It will be possible to use this for more than just NTLMSSP in future.
This prepares a fix for https://bugzilla.samba.org/show_bug.cgi?id=10288
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This pares a fix for https://bugzilla.samba.org/show_bug.cgi?id=10288
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Everything uses the top level ntlmssp code via gensec now.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This pares a fix for https://bugzilla.samba.org/show_bug.cgi?id=10288
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This will be used by winbindd in order to correctly implement WINBINDD_CCACHE_NTLMAUTH.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
There's no reason to use gensec_ntlmssp3_client_ops, the
WINBINDD_CCACHE_NTLMAUTH isn't available via gensec anyway.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
When dsgetdcname return its result based on discovery
process (instead of retrieving cached value), always
return the found server's IP address in dc_address field,
rather than its netbios name.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11769
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
data used to be a stack allocated array but was changed to a heap
allocated buffer by commit 95a81a3. Update sizeof(data) to data_size.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ira Cooper <ira@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Feb 27 05:25:40 CET 2016 on sn-devel-144
asn1_extract_blob() stops further asn1 processing by setting has_error.
Don't call asn1_has_error() after asn1_extract_blob() has been successful
otherwise we get an "Failed to build krb5 wrapper at" message
on success.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11702
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
This changes the type used for # arguments to PyArg_ParseTupleAndKeywords
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jelmer Vernooij <jelmer@samba.org>
Don't call asn1_has_error() after asn1_extract_blob() has been successful
otherwise we get an "Failed to build negTokenInit at offset" message
on success.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Thu Jan 7 16:00:02 CET 2016 on sn-devel-144
When querying disk usage in the "dir" and "du" commands,
use the current directory. This behavior is compatible
with Windows command shell "dir" command.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11662
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Greatly helped by <shargagan@novell.com> to
track down this issue.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11624
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Fri Dec 18 01:02:55 CET 2015 on sn-devel-144
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu Dec 17 17:49:14 CET 2015 on sn-devel-144
This should fix an error code when neither DS_IS_FLAT_NAME nor
DS_IS_DNS_NAME are specified. If netbios is disabled and the DC
can't be found via DNS we should not return NOT_SUPPORTED but
DOMAIN_CONTROLLER_NOT_FOUND.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Nov 6 13:43:45 CET 2015 on sn-devel-104
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11509
Signed-off-by: Har Gagan Sahai <SHarGagan@novell.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ira Cooper <ira@wakeful.net>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Sep 11 06:39:19 CEST 2015 on sn-devel-104
Signed-off-by: Anoop C S <anoopcs@redhat.com>
Reviewed-by: Guenther Deschner <gd@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Wed Sep 9 21:33:49 CEST 2015 on sn-devel-104
We marshall into a binary buffer, uint8_t better reflects that.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Aug 27 00:40:58 CEST 2015 on sn-devel-104
sid_parse takes a binary blob, uint8_t reflects this a bit
better than char * does
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
On i386, unsigned long long is 64 bit while the pointer is 32, and
this fails under autobuild with -WError.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Jul 21 05:14:20 CEST 2015 on sn-devel-104
We check for dir == NULL but dereference it during variable declaration.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Fri Jun 26 22:35:02 CEST 2015 on sn-devel-104
Bug 11361 - Reading of EA's (Extended Attributes) fails using SMB2 and above
protocols
Tested against Win2k12r2 server.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11361
Signed-off-by: Anubhav Rakshit <anubhav.rakshit@gmail.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
When composing the list of servers out of the server affinity cache
and "password server" parameter, there's fallback to DNS-SRV-record-
based search if the "password server" + session affinity yield an empty
list. However:
1. The way the code is written, it never gets executed because the empty list
is not an empty string (it contains a comma)
2. This fallback is doe in any case just a few lines down the function
Therefore this patch simply removes this fallback code.
Signed-off-by: Uri Simchoni <urisimchoni@gmail.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
When finding DCs, there are three sources of addresses:
1. "Last good server"
2. Configured password server
3. SRV DNS queries
Since those different sources may return the same addresses, the
IP list is checked for duplicates, e.g. in order to save on
the LDAP ping that usually follows. Both IP address and port are
compared.
This change fixes the address duplicate removal for the case of KDC
search, where the "last good server" or configured password server
also appears in the DNS SRV query response.
An (undocumented?) assumption is that the "password server" parameter
is applicable to KDCs as well, but if a port is specified (e.g.
dc1.example.com:390), then this is the ldap port.
Signed-off-by: Uri Simchoni <urisimchoni@gmail.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
get_kdc_list() should look for _kerberos.xxx SRV records rather
than _ldap.xxx records. This has significance in two cases:
- Non-default DNS configurations
- When building a custom krb5.conf file for a domain, an attempt is
made to get site-specific as well as site-less records, but the
search for _ldap records yields a cached site-specific result even
for the site-less query.
Signed-off-by: Uri Simchoni <urisimchoni@gmail.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
This simplifies/fixes the cleanup, because we need to remove any
tevent_fd object before closing the socket fd.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11316
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
By using the tstream abstraction we don't need to take care
error handling regarding dangling tevent_fd structures.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11316
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
By using the tstream abstraction we don't need to take care
error handling regarding dangling tevent_fd structures.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11316
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
The need to destroy the tevent_fd before closing the socket fd.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11316
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Once we got an error or a valid connection we should destroy all other
connection attempts as early as possible.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11316
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
open_socket_out_send() or nb_connect_send() likely use socket fds and
tevent_fd objects. We should clean them up as early as possible.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11316
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
cli_session_request_send() is likely to use tevent_fd objects on the given
socket fd, so we need to destroy the request before closing the socket fd.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11316
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Bug 11295 - Excessive cli_resolve_path() usage can slow down transmission.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11295
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Wed Jun 10 04:09:36 CEST 2015 on sn-devel-104
Cache targetcli on file open in the SMBCFILE struct.
Bug 11295 - Excessive cli_resolve_path() usage can slow down transmission.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11295
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
To reflect new splice ABI.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri May 29 05:30:06 CEST 2015 on sn-devel-104
Introduce a new operation, splice, which copies data from one SMBCFILE
to another. Implement this operation using FSCTL_SRV_COPYCHUNK_WRITE for
SMB2+ protocols and using read+write for older protocols. Since the
operation may be long running, it takes a callback which gets called
periodically to indicate progress to the application and given an
opportunity to stop it.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
I still need to fix the rpc stuff, but we are almost there.
Signed-off-by: Richard Sharpe <rsharpe@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu May 14 22:16:56 CEST 2015 on sn-devel-104
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ira Cooper <ira@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Thu May 14 16:49:39 CEST 2015 on sn-devel-104
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Böhme <rb@sernet.de>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Apr 15 05:57:25 CEST 2015 on sn-devel-104
Bug #11186: Crash seen in libsmbclient due to free of server structure during SMBC_getxattr() call
Bug: https://bugzilla.samba.org/show_bug.cgi?id=11186
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Tue Apr 14 02:58:43 CEST 2015 on sn-devel-104
Instead of having every 2nd byte as '\0' in the utf16 password,
because the utf8 form is based on an ascii subset, we convert
the random buffer from CH_UTF16MUNGED to CH_UTF8.
This way we have a random but valid utf8 string,
which is almost like what Windows is doing.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
We should maintain current and previous passwords on both sides of the trust,
which mean we need to pass our view of the new version to the remote DC.
This avoid problems with replication delays and make sure the kvno
for cross-realm tickets is in sync.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Using pdb_get_trust_credentials() works for all kind of trusts
and gives us much more details regarding the credentials.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
SEC_CHAN_DNS_DOMAIN trusts use longer passwords, Windows uses 240 UTF16 bytes.
Some trustAttribute flags may also make impact on the length on Windows,
but we could be better if we know that the remote domain is an AD domain.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Bug 11177 - no talloc stackframe at ../source3/libsmb/clifsinfo.c:444, leaking memory
https://bugzilla.samba.org/show_bug.cgi?id=11177
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Mar 26 22:21:30 CET 2015 on sn-devel-104
Bug 10888 - smbclient doesn't ignore "not_defined_in_RFC4178@please_ignore"
https://bugzilla.samba.org/show_bug.cgi?id=10888
Code patch from <martin.wilck@ts.fujitsu.com>
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan (metze) Metzmacher <metze@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Mar 26 00:56:25 CET 2015 on sn-devel-104
Uses an cli_echo() call to do so.
Based on code from <shargagan@novell.com>
Bug 11079 - libsmbclient not checking the cached connection alive status before re-using it from connection cache
https://bugzilla.samba.org/show_bug.cgi?id=11079
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Fri Mar 20 13:48:26 CET 2015 on sn-devel-104
Packet traces showing such servers are found in the bug this fixes:
https://bugzilla.samba.org/show_bug.cgi?id=10016
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Mar 19 12:05:56 CET 2015 on sn-devel-104
If this fails we can still fallback to the old password...
Before trying the password change we verify the dc knows our current password.
This should make the password changes much more robust.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Feb 27 06:20:58 CET 2015 on sn-devel-104
6c9de0cd05 requires this extra change.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=11059
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jan 21 04:29:06 CET 2015 on sn-devel-104
libsmbclient uses the smbc_init->smbc_get_auth_data_fn() provided
workgroup/domain in initial connections, but then switches to the
default smb.conf workgroup/domain when handling DFS referrals.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=11059
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
[MS-DFSC] 3.2.1.1 and 3.2.1.2 states that DFS targets with the same site
location or relative cost are placed in random order in a DFS referral
response.
libsmbclient currently resolves DFS referrals on every API call, always
using the first entry in the referral response. With random ordering,
libsmbclient may open a new server connection, rather than reuse an
existing (cached) connection established in a previous DFS referred API
call.
This change sees libsmbclient check the connection cache for any of the
DFS referral response entries before creating a new connection.
This change is based on a patch by Har Gagan Sahai
<SHarGagan@novell.com>.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=10123
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The functions called futher down can cope with host == NULL.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11058
This is part one of the bugfix:
This ensures that it is enough to pass one of host or address to the function.
Pair-Programmed-With: Andreas Schneider <asn@samba.org>
Signed-off-by: Michael Adam <obnox@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Forcing NT_STATUS_UNSUCCESSFUL is not a good idea, we should return
NT_STATUS_LOGON_FAILURE instead.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=11010
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This account is otherwise just like the workstation trust acocunt, so use that code.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=10891
Pair-programmed-with: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=10279
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Tue Dec 2 21:46:53 CET 2014 on sn-devel-104
If we do not set the netbios_name we are not able to connect to a
Windows DC.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=10279
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Nov 20 18:45:28 CET 2014 on sn-devel-104
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Steve French <smfrench@gmail.com>
Tested-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Steve French <sfrench@samba.org>
Autobuild-Date(master): Thu Oct 23 20:44:31 CEST 2014 on sn-devel-104
Change-Id: Ib432b4ff66f966de9e733e01de6de2f486c0c728
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Change-Id: I45e44405ea51ecb1aa38c72f4fc6243a1d3d531a
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Change-Id: I8b32be8a10d2bff33bb468cc68c98e555b220bde
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Change-Id: I32e19078a4d4948e405f39dc2a479ff925ad3684
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Change-Id: I7333140906bb3a487205b5760396dcc00a9f49b0
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Change-Id: Ia6b33a25628ae08be8a8c6baeb71ce390315cb45
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This provides a credentials-based interface. In the long term, we
will want to change this not to reference the credentials, but for now
this suits the caller in winbindd_cm.c
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This should aid debugging when this is called from an automated process.
Andrew Bartlett
Change-Id: I2c7291ab3f67f9f7462d7c52c8c9a4b042f7ec5a
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This allows us to pass this value in directly from the cli_credentials structure in winbindd, once we merge this with cli_rpc_pipe_open_spnego().
Andrew Bartlett
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Also check for allocation failures.
Reported-by: Franz Pförtsch <franz.pfoertsch@brose.com>
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This can be used by tests to use the same client guid for multiple connections.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
asprintf_strupper_m() doesn't set *strp on error.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Volker Lendecke <Volker.Lendecke@SerNet.DE>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Sep 13 03:21:39 CEST 2014 on sn-devel-104
Found by AddressSanitizer
Change-Id: Ic8b3e2599713c37b11324f9ec2d01891f0f287b9
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Kamen Mazdrashki <kamenim@samba.org>
Set a max charge for SMB2 connections so that larger request sizes can
be used and more requests can be in flight.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Aug 21 17:31:11 CEST 2014 on sn-devel-104
Fixes bug #10759 - Memory leak in libsmbclient in cli_set_mntpoint function
https://bugzilla.samba.org/show_bug.cgi?id=10759
Signed-off-by: Har Gagan Sahai <SHarGagan@novell.com>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Aug 13 04:36:50 CEST 2014 on sn-devel-104
This field servers as a source for the gecos field. We should not overwrite it
when a info3 struct from a samlogon network level gets saved in which case this
field is always NULL.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=10440
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Autobuild-User(master): Günther Deschner <gd@samba.org>
Autobuild-Date(master): Tue Jul 15 18:25:28 CEST 2014 on sn-devel-104
Done by rename cli_ntcreate_send/recv to cli_ntcreate1_send/recv and
cli_create_send/recv to cli_ntcreate_send/recv
Possibly cli_create might be the better name, but I am sooo used to
cli_ntcreate() that I don't really want to rename this ;-)
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Fallback to the old CORE protocol SMBdskattr if
trans2/SMB_FS_FULL_SIZE_INFORMATION is not supported.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <Volker.Lendecke@SerNet.DE>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Jun 7 05:41:44 CEST 2014 on sn-devel-104
Remove the fallback call from cli_dskattr() (now it's
not called from external client code).
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <Volker.Lendecke@SerNet.DE>
Both offer the same functionality, sec_ace_equal() will be removed.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
SLES's cifsd and Apple's smbx do not correctly handle FILE_NON_DIRECTORY_FILE
which prevents recursive copies in gvfs from working correctly [1] since GVFS
tries to open the directory, expecting ENOTDIR, but it suceeds and appears as a
zero byte file.
This fix adds code to the cli_open() open code that checks if
CreateOptions was requested with FILE_NON_DIRECTORY_FILE set,
and if the attributes returned include FILE_ATTRIBUTE_DIRECTORY
we synchronously close the file handle just opened, and return
NT_STATUS_FILE_IS_A_DIRECTORY to the caller.
Depends on the previous API update to cli_ntcreate()
to add returned attributes.
Fixes bug #10587 - Opening directories on SLES's cifsd and Apple's smbx succeeds.
https://bugzilla.samba.org/show_bug.cgi?id=10587
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
This completes the update of the create API to return
all the data returned by the server on open.
We can now use this data to detect buggy servers
without an extra round trip.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Add a return parameter of struct smb_create_returns *cr to
cli_ntcreate()
cli_ntcreate_recv()
cli_nttrans_create()
cli_nttrans_create_recv()
Always pass in NULL for now. This fixes the create
API to always fully return the data the server has
given back to us on the open file to the caller.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
