IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Should tab-complete a single remote path.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Tue Jun 25 10:55:45 UTC 2019 on sn-devel-184
This is a deviation from the Posix readlink function that from my
point of view makes this function easier to use. In Posix, probably
the assumption is that readlink is cheap, so someone under memory
constraints could just start with a small buffer and incrementally
increase the buffer size. For us, it's a network round-trip, and we
have the luxury of [mt]alloc, which the syscall kernel interface does
not have.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Mar 27 12:31:37 UTC 2019 on sn-devel-144
This is only used by command line utilities and has additional
dependencies. Move to a separate file to contain the dependencies to the
command line tools.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13465
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
smbclient -L //server
before:
Reconnecting with SMB1 for workgroup listing.
Connection to earth.milkyway.site failed (Error NT_STATUS_RESOURCE_NAME_NOT_FOUND)
Failed to connect with SMB1 -- no workgroup available
after:
Reconnecting with SMB1 for workgroup listing.
Unable to connect with SMB1 -- no workgroup available
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This allows names containing .. components to be resolved on the client side
before being sent to the server. Relative names work in SMB1 but not in SMB2.
Fix both client.c and clitar.c
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13093
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Correctly canonicalizes a remote pathname removing '..'
elements before sending to a remote server. '..' elements
work in SMB1 pathnames, but not in SMB2.
Not yet used.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13093
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
With the upgrade to SMB3.1.1 from cifs for smbclient,
setmode no longer works when removing attributes,
if the resultant attribute is 0 it is skipped
(unlike for the old cifs setpathinfo).
When clearing the final attribute, pass in ATTRIBUTE_NORMAL
instead of zero.
This also removes a redundant cli_setatr call
when clearing attributes (cli_setatr was being called
twice).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12899
Signed-off-by: Steve French <sfrench@samba.org>
Reviewed-by: Anne Marie Merritt <annemarie.merritt@primarydata.com>
Reviewed-by: Richard Sharpe <realrichardsharpe@gmail.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Jul 14 02:43:47 CEST 2017 on sn-devel-144
On interactive sessions we print the following instead now:
Try "help" do get a list of possible commands.
smb: >
The reason for this is that we don't get these information via SMB2
and the we only get the domain name via some layering violations
from the NTLMSSP state.
It's better to remove this consitently for all SMB and auth
protocol combinations.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Only access through utility functions. Remove all the local pointer aliases
that were just being set to cmdline_auth_info in the client tools.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This option causes the rename to request that the
destination file / directory be replaced if it exists.
Supported only in SMB2 and higher protocol.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Adds support for replacing the destination file at
the higher-level cli_rename(). This is actually supported
only by SMB2, and fails with invalid parameter with SMB1.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
All users of POPT_COMMON_CREDENTIALS basically need the same logic,
while some ignore a broken smb.conf and some complain about it.
This will allow the future usage of config options in the
credential post processing.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
There're no callers which try to pass a raw lm_response directly anymore.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Dec 9 13:09:37 CET 2016 on sn-devel-144
This makes it more obvious where this legacy code is used
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sun Nov 20 06:23:19 CET 2016 on sn-devel-144
There're no callers which tried to pass raw {lm,nt}_response any more.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
This offers a global 'struct user_auth_info *cmdline_auth_info',
similar to the 'cmdline_credentials' we have in
source4/lib/cmdline/popt_common.c.
And we create that in the POPT_CALLBACK_REASON_PRE stage
and finalize it in the POPT_CALLBACK_REASON_POST stage.
That means much less boring work for the callers
and more freedom to change the user_auth_info internals
in future.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
If 'disable netbios' is true 'smbclient -L //server' will try use the NBT
port to list the servers and 'smbclient -M //server' use the netbios
messaging WinPopup facility, we should honour the config and not do that.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12418
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
From smbclient manpage:
notify <dir name>
Query a directory for change notifications. This command issues a
recursive filechangenotify call for all possible changes.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Nov 9 06:12:23 CET 2016 on sn-devel-144
Once with 'get_names = false' to get the size, then again with 'get_names = true'
to get the data or a Windows server fails to return valid info. Samba doesn't have this bug.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12165
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
Autobuild-User(master): Uri Simchoni <uri@samba.org>
Autobuild-Date(master): Fri Aug 19 23:59:35 CEST 2016 on sn-devel-144
setmode <file> attribute is a valid smbclient command even if libarchive
isn't on the system and tarmode isn't compiled in.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
