IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
ctdb_control_getnodesfile() calls ctdb_read_nodes(), which returns a
struct ctdb_node_map rather than the old version, so update associated
marshalling. While here modernise a debug message and wrap the
function arguments.
For ctdb_load_nodes_file() to use ctdb_read_nodes(), tweak
convert_node_map_to_list() to also use the modern node map structure.
Remove unused copy of ctdb_read_nodes_file().
Signed-off-by: Martin Schwenke <mschwenke@ddn.com>
Reviewed-by: Anoop C S <anoopcs@samba.org>
Remote nodes are already initialised as UNHEALTHY when the node list
is initialised at startup (ctdb_load_nodes_file() calls
convert_node_map_to_list()) and when disconnected (ctdb_node_dead()).
So, drop this code.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14784
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Thu Sep 9 02:38:34 UTC 2021 on sn-devel-184
If NODE_FLAGS_DISCONNECTED is set the node can be in half-connected state. With
this change we ensure to restart the transport for this case.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14295
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This is the core logic from ctdb_ip_to_pnn(), so re-implement that
that function using ctdb_ip_to_node().
Something similar (ctdb_ip_to_nodeid()) was recently removed in commit
010c1d77cd because it wasn't required.
Now there is a use case.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14084
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Node ID is a poorly defined concept, indicating the slot in the node
map where the IP address was found. This signed value also ends up
compared to num_nodes, which is unsigned, producing unwanted warnings.
Just return the PNN because this what both callers really want.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This broadcast is misnamed. Both places where this type of broadcast
is used expect the broadcast to go to all active nodes.
Make the corresponding change to the semantics in the daemon by
sending to all active nodes.
There is a mismatch between the ideas of VNN map and active nodes. A
node that is not in the VNN map but is active can still host database
records. These were the same until the LMASTER capability was
introduced and then the logic was not updated.
The only place where the VNN map is relevant is when finding the
location master of a record in the migration code.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13499
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Extend CTDB_REQ_KEEPALIVE packet to include version and uptime. If CTDB
versions do not match shutdown ctdb.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Setting the recovery lock file at startup can be done more simply.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This reverts commit 0ff90f4fac.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11707
The checks against database generation are not required since
the global generation is updated as part of updating vnnmap
before the actual database recovery. This change was done in
5aab31a39a.
Checking only against the database generation is incomplete. It can
cause CTDB to abort if the following sequence of events happen.
- CTDB gets REQ_DMASTER packet (gen1)
This packet processing gets deferred to get a record lock
- CTDB goes into recovery, marks RECOVERY_ACTIVE
CTDB recovery helper updates vnnmap (gen2)
- CTDB processes REQ_DMASTER packet (gen1)
The check against database generation (gen1) succeeds.
The check for lmaster is now invalid because VNNMAP has changed.
This will cause CTDB to abort due to protocol error.
Reverting the patch stops processing packets of older generation before
they get into call processing.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Tue Feb 9 12:39:24 CET 2016 on sn-devel-144
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Nov 6 13:43:45 CET 2015 on sn-devel-104
This groups function prototypes for common client/server functions in
common/common.h and removes them from ctdb_private.h.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Instead of includes.h, include the required header files explicitly.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
CTDB verifies the generation in the packet header matches that of the
current generation. However, that check now needs to be done where
database context is available. So add in the check in handlers for
database requests (CTDB_REQ_CALL, CTDB_REQ_DMASTER, CTDB_REPLY_DMASTER
and CTDB_REPLY_CALL).
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
New function ctdb_read_nodes_file() reads a nodes file into a node
map, which is a useful intermediate format. This function should
replace the node reading code in the ctdb CLI tool. It will also be
useful for sanity checking of nodes files across the cluster.
New function convert_node_map_to_list() converts a node map to a node
array (and associated node count). This fills in the details that
aren't present in the node map. This may also useful as a separate
function later if node list reloading stages the data after a sanity
check - the approach is not yet finalised.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Every time a nodemap is contructed the node IP addresses all need to
be parsed. This isn't very productive use of CPU.
Instead, parse each string once when the nodes file is loaded. This
results in much simpler code.
This code also removes the use of ctdb_address. Duplicating the port
is pointless without an abstraction layer around ctdb_address. If
CTDB gets an incompatible transport in the future then add an
abstraction layer.
Note that the infiniband code is not updated. Compilation of the
infiniband code is already broken. Fixing it will be a separate,
properly tested effort.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Having it require a CTDB context stops ctdb_parse_address() from being
used in more generic code. Just use the existing talloc context for
memory allocations.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Just add a flags parameter to ctdb_add_nodes() and use the same code.
Less is more.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is currently set in 2 places. One of them makes the node loading
code difficult to refactor. Also, when the surrounding code in either
place is touched then it might get broken.
This only needs to be done once at startup, not on every reload. So
do it once in a very obvious way, sacrificing a few CPU cycles for
some added clarity.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Each node reload unnecessarily and incorrectly resets the VNN map,
causing a potentially unnecessary recovery. When nodes are reloaded
any newly deleted nodes should already be disconnected and any newly
added nodes should also be disconnected. This means that reloading
the nodes file should not cause a change in the VNN map.
The current implementation also leaks memory every time the nodes are
reloaded.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It is pointless having a recovery lock but not sanity checking that it
is working. Also, the logic that uses this tunable is confusing. In
some places the recovery lock is released unnecessarily because the
tunable isn't set.
Simplify the logic by assuming that if a recovery lock is specified
then it should be verified.
Update documentation that references this tunable.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is part of a migration to Samba's lib/util. CTDB always passes 0
(i.e. no max_size) so use a simple assert() to enforce this, rather
than changing a lot of code that will be discarded anyway.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is important enough that we should see it when the log level is
DEBUG_NOTICE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit eb8ec5681bfccb26c8ffae72952d54bb0ba46249)
No need to check if the options are set. The options are always set
via static defaults.
No need to talloc_strdup() the values via wrapper functions. The
options aren't going away. Remove now unused ctdb_set_tdb_dir() and
similar functions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 1fe82f3d7b610547ff4945887f15dd6c5798a49b)
This allows ctdb_load_nodes_file() to move to ctdb_server.c and
ctdb_set_nlist() to become static.
Setting ctdb->nodes_file needs to be done early, before the nodes file
is loaded. It is now set from CTDB_BASE instead ETCDIR, so setting
CTDB_BASE also needs to be done earlier.
Unhack ctdbd_test.c - it no longer needs to define
ctdb_load_nodes_file().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 20e705e63bd3b20837cc3ac92fdcf2a9650ccfc8)
Currently flags are initialised in 2 places. One of them is in
ctdb_tcp_listen_automatic(), which just seems wrong. This makes the
code easier to follow by just doing it in ctdb_start_daemon().
This means that the flags are now initialised later than previously.
However, it is still done before the transport is started and before
clients can connect.
In future it might make sense to do a similar thing with setting the
PNN. However, the current optimisation is reasonably obvious...
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 2bbee8ac23ad5b7adf7122d8c91d5f0d54582507)
In Samba this is now called "tevent", and while we use the backwards
compatibility wrappers they don't offer EVENT_FD_AUTOCLOSE: that is now
a separate tevent_fd_set_auto_close() function.
This is based on Samba version 7f29f817fa.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This used to be ctdb commit 85e5e760cc91eb3157d3a88996ce474491646726)
This might be a bit less efficient, but experience in winbind has shown that
event callbacks can trigger changes in the socket state in very hard to
diagnose ways.
(This used to be ctdb commit a78b8ea7168e5fdb2d62379ad3112008b2748576)
This is used to mark nodes as being DELETED internally in ctdb
so that nodes are not renumbered if / when they are removed from the nodes file.
This is used to be able to do "ctdb reloadnodes" at runtime without
causing nodes to be renumbered.
To do this, instead of deleting a node from the nodes file, just comment it out like
1.0.0.1
#1.0.0.2
1.0.0.3
After removing 1.0.0.2 from the cluster, the remaining nodes retain their
pnn's from prior to the deletion, namely 0 and 2
Any line in the nodes file that is commented out represents a DELETED pnn
(This used to be ctdb commit 6a5e4fd7fa391206b463bb4e976502f3ac5bd343)
