IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Add 'log nt token command' parameter. If set, %s is replaced with the user
sid, and %t takes all the group sids.
Volker
(This used to be commit e7dc9fde45)
* rewrote the tdb layout of privilege records in account_pol.tdb
(allow for 128 bits instead of 32 bit flags)
* migrated to using SE_PRIV structure instead of the PRIVILEGE_SET
structure. The latter is now used for parsing routines mainly.
Still need to incorporate some client support into 'net' so
for setting privileges. And make use of the SeAddUserPrivilege
right.
(This used to be commit 41dc7f7573)
(based on Simo's code in trunk). Rewritten with the
following changes:
* privilege set is based on a 32-bit mask instead of strings
(plans are to extend this to a 64 or 128-bit mask before
the next 3.0.11preX release).
* Remove the privilege code from the passdb API
(replication to come later)
* Only support the minimum amount of privileges that make
sense.
* Rewrite the domain join checks to use the SeMachineAccountPrivilege
instead of the 'is a member of "Domain Admins"?' check that started
all this.
Still todo:
* Utilize the SePrintOperatorPrivilege in addition to the 'printer admin'
parameter
* Utilize the SeAddUserPrivilege for adding users and groups
* Fix some of the hard coded _lsa_*() calls
* Start work on enough of SAM replication to get privileges from one
Samba DC to another.
* Come up with some management tool for manipultaing privileges
instead of user manager since it is buggy when run on a 2k client
(haven't tried xp). Works ok on NT4.
(This used to be commit 77c10ff9aa)
The old #ifdef JRATEST-block was copying 16 bytes and thus overwriting
acct_flags with bizarre values, breaking a lot of things.
This patch is successfully running in a production environment for quite
some time now and is required to finally allow Exchange 5.5 to access
another Exchange Server when both are running on NT4 in a
samba-controlled domain. This also allows Exchange Replication to take
place, Exchange Administrator to access other Servers in the network,
etc. Fixes Bugzilla #1136.
Thanks abartlet for helping me with that one.
Guenther
(This used to be commit bd4c5125d6)
functions so we can funnel through some well known functions. Should help greatly with
malloc checking.
HEAD patch to follow.
Jeremy.
(This used to be commit 620f2e608f)
abartlet, I'd like to ask you to take a severe look at this!
We have solved the problem to find the global groups a user is in twice: Once
in auth_util.c and another time for the corresponding samr call. The attached
patch unifies these and sends them through the passdb backend (new function
pdb_enum_group_memberships). Thus it gives pdb_ldap.c the chance to further
optimize the corresponding call if the samba and posix accounts are unified by
issuing a specialized ldap query.
The parameter to activate this ldapsam behaviour is
ldapsam:trusted = yes
Volker
(This used to be commit b94838aff1)
setups on its way to open a pipe. This gets rid of many round-trips to the
LDAP server during logon by setting up the server_info_guest once and not
asking the LDAP server and nss every time. Make sure that the ldap connection
is reopened in the child. (I did not look at the sql backends.)
Volker
(This used to be commit 3298f6105e)
Use the fully qualified DOMAIN\user format for 'security = domain|ads'
and apply after authentication has succeeded.
* also change fill_domain_username() to only lowercase the username
and not the domain+username. This was a cosmetic fix only.
makes the output more consistent with %D and %U.
(This used to be commit 30ee2d5b09)
for setting up an schannel connection. This solves the problem
of a Samba DC running winbind, trusting a native mode AD domain,
and needing to enumerate AD users via wbinfo -u.
(This used to be commit e9f109d1b3)
For a (very) long time, we have had a bug in Samba were an NTLMv2-only
PDC would fail, because it converted the password into NTLM format for
checking.
This patch performs the direct comparison required for interactive
logons to function in this situation. It also removes the 'auth flags', which
simply where not ever used.
Natrually, this plays with the size of structures, so rebuild, rebuild
rebuild...
Andrew Bartlett
(This used to be commit 9598593bcf)
- Fill in the 'backup' idea of a domain, if the DC didn't supply one. This
doesn't seem to occour in reality, hence why we missed the typo.
lib/charcnv.c:
lib/smbldap.c:
libads/ldap.c:
libsmb/libsmbclient.c:
printing/nt_printing.c:
- all the callers to pull_utf8_allocate() pass a char ** as the first
parammeter, so don't make them all cast it to a void **
nsswitch/winbind_util.c:
- Allow for a more 'correct' view of when usernames should be qualified
in winbindd. If we are a PDC, or have 'winbind trusted domains only',
then for the authentication returns stip the domain portion.
- Fix valgrind warning about use of free()ed name when looking up our
local domain. lp_workgroup() is maniplated inside a procedure that
uses it's former value. Instead, use the fact that our local domain is
always the first in the list.
Andrew Bartlett
(This used to be commit 494781f628)
- NTLM2 support in the server
- KEY_EXCH support in the server
- variable length session keys.
In detail:
- NTLM2 is an extension of NTLMv1, that is compatible with existing
domain controllers (unlike NTLMv2, which requires a DC upgrade).
* This is known as 'NTLMv2 session security' *
(This is not yet implemented on the RPC pipes however, so there may
well still be issues for PDC setups, particuarly around password
changes. We do not fully understand the sign/seal implications of
NTLM2 on RPC pipes.)
This requires modifications to our authentication subsystem, as we
must handle the 'challege' input into the challenge-response algorithm
being changed. This also needs to be turned off for
'security=server', which does not support this.
- KEY_EXCH is another 'security' mechanism, whereby the session key
actually used by the server is sent by the client, rather than being
the shared-secret directly or indirectly.
- As both these methods change the session key, the auth subsystem
needed to be changed, to 'override' session keys provided by the
backend.
- There has also been a major overhaul of the NTLMSSP subsystem, to merge the 'client' and 'server' functions, so they both operate on a single structure. This should help the SPNEGO implementation.
- The 'names blob' in NTLMSSP is always in unicode - never in ascii.
Don't make an ascii version ever.
- The other big change is to allow variable length session keys. We
have always assumed that session keys are 16 bytes long - and padded
to this length if shorter. However, Kerberos session keys are 8 bytes
long, when the krb5 login uses DES.
* This fix allows SMB signging on machines not yet running MIT KRB5 1.3.1. *
- Add better DEBUG() messages to ntlm_auth, warning administrators of
misconfigurations that prevent access to the privileged pipe. This
should help reduce some of the 'it just doesn't work' issues.
- Fix data_blob_talloc() to behave the same way data_blob() does when
passed a NULL data pointer. (just allocate)
REMEMBER to make clean after this commit - I have changed plenty of data structures...
(This used to be commit f3bbc87b0d)
sesssetup to fall back to 'user' instaed of failing is REA.LM\user
doesn't exist.
also fix include line in smb_acls.h as requested by metze
(This used to be commit 62ed2598b3)
Use winbindd to get the group list if possible since we already
know it from netsamlogon_cache.tdb. More effecient than letting
libc call getgrent() to get seconary groups.
Tested by Ken Cross.
(This used to be commit 3c537c906f)
* move rid allocation into IDMAP. See comments in _api_samr_create_user()
* add winbind delete user/group functions
I'm checking this in to sync up with everyone. But I'm going to split
the add a separate winbindd_allocate_rid() function for systems
that have an 'add user script' but need idmap to give them a RID.
Life would be so much simplier without 'enable rid algorithm'.
The current RID allocation is horrible due to this one fact.
Tested idmap_tdb but not idmap_ldap yet. Will do that tomorrow.
Nothing has changed in the way a samba domain is represented, stored,
or search in the directory so things should be ok with previous installations.
going to bed now.
(This used to be commit 0463045cc7)
* remove idmap_XX_to_XX calls from smbd. Move back to the
the winbind_XXX and local_XXX calls used in 2.2
* all uid/gid allocation must involve winbindd now
* move flags field around in winbindd_request struct
* add WBFLAG_QUERY_ONLY option to winbindd_sid_to_[ug]id()
to prevent automatic allocation for unknown SIDs
* add 'winbind trusted domains only' parameter to force a domain member
server to use matching users names from /etc/passwd for its domain
(needed for domain member of a Samba domain)
* rename 'idmap only' to 'enable rid algorithm' for better clarity
(defaults to "yes")
code has been tested on
* domain member of native mode 2k domain
* ads domain member of native mode 2k domain
* domain member of NT4 domain
* domain member of Samba domain
* Samba PDC running winbindd with trusts
Logons tested using 2k clients and smbclient as domain users
and trusted users. Tested both 'winbind trusted domains only = [yes|no]'
This will be a long week of changes. The next item on the list is
winbindd_passdb.c & machine trust accounts not in /etc/passwd (done
via winbindd_passdb)
(This used to be commit 8266dffab4)
Samba will now use the user's UNIX primary group, as the primary group when
dealing with the filesystem. The NT primary group is ignored in unix.
For the NT_TOKEN, the primary group is the NT priamry group, and the unix
primary group is added to the NT_TOKEN as a supplementary group.
This should fix bug #109, but will need to be revisited when we get a full
NT group database.
Also in this commit:
- Fix debug statements in service.c
- Make idmap_ldap show if it's adding, or modifying an existing DN
- Make idmap_ldap show both the error message and error string
(This used to be commit 32e455a714)
- The 'not implmented' checks are now done by all auth modules
- the ntdomain/trustdomain/winbind modules are more presise as to
what domain names they can and cannot handle
- The become_root() calls are now around the winbind pipe opening only,
not the entire auth call
- The unix username is kept seperate from the NT username, removing the
need for 'clean off the domain\' in parse_net.c
- All sid->uid translations are now validated with getpwuid() to put a very
basic stop to logins with 'half deleted' accounts.
Andrew Bartlett
(This used to be commit 85f88191b9)
It was caused by the winbind_ping() call in is_trusted_domain()
o if we are a DC then we check our own direct trust relationships
we have to rely on winbindd to update the truatdom_cache
o if we are a domain member, then we can update the trustdom_cache
ourselves if winbindd is not there
(This used to be commit 22dfcafb37)
* is_trusted_domain() is broken without winbind. Still working on this.
* get_global_sam_name() should return the workgroup name unless we
are a standalone server (verified by volker)
* Get_Pwnam() should always fall back to the username (minus domain name)
even if it is not our workgroup so that TRUSTEDOMAIN\user can logon
if 'user' exists in the local list of accounts (on domain members w/o
winbind)
Tested using Samba PDC with trusts (running winbindd) and a Samba 3.0
domain member not running winbindd.
notes: make_user_info_map() is slightly broken now due to the
fact that is_trusted_domain() only works with winbindd. disabled
checks temporarily until I can sort this out.
(This used to be commit e1d6094d06)
* rename original sam auth method to sam_ignoredomain
* remove samstrict_dc auth method (now covered by 'sam')
* fix wbinfo -a '...' and getent passwd bugs when running
winbindd on a samba PDC (reported by Volker)
(This used to be commit 52166faee7)
to handle domain trusts. Jeremy and I talked about this
and it's going in as working code. It keeps winbind clean
and solves the trust problem with minimal changes.
To summarize, there are 2 basic cases where the deadlock would
occur. (1) lookuping up secondary groups for a user, and
(2) get[gr|pw]nam() calls that fall through the NSS layer because
they don't exist anywhere.
o To handle case #1, we bypass winbindd in sys_getgrouplist() unless
the username includes the 'winbind separator'.
o Case #2 is handled by adding checks in winbindd to return failure
if we are a DC and the domain matches our own.
This code has been tested using basic share connections, domain
logons, and with pam_winbind (both with and without 'winbind
use default domain'). The 'trustdomain' auth module should work
as well if an admin wants to manually create UNIX users for
acounts in the trusted domains.
Other misc fixes:
* we need to fix check_ntlm_password() to be able to determine
if an auth module is authoritative over a user (NT_STATUS_WRONG_PASSWORD,
etc...). I worked around my specific situation, but this needs to be
fixed. the winbindd auth module was causing delays.
* fix named server mutex deadlock between trust domain auth module
and winbindd looking up a uid
* make sure SAM_ACCOUNT gets stored in the server_info struct for the
_net_sam_logon() reply.
Configuration details:
The recommended method for supporting trusts is to use winbind.
The gets us around some of the server mutex issues as well.
* set 'files winbind' for passwd: and group: in /etc/nsswitch.conf
* create domain trusts like normal
* join winbind on the pdc to the Samba domain using 'net rpc join'
* add normal parameters to smb.conf for winbind
* set 'auth method = guest sam winbind'
* start smbd, nmbd, & winbindd
Problems that remain:
* join a Windows 2k/XP box to a Samba domain.
* create a 2-way trust between the Samba domain
and an NT domain
* logon to the windows client as a user from theh trusted
domain
* try to browse server in the trusted domain (or other
workstations). an NT client seems to work ok, but 2k
and XP either prompt for passwords or fail with errors.
apparanently this never got tested since no one has ever been
able to logon as a trusted user to a Samba domain from a Windows
client.
(This used to be commit f804b590f9)
map to guest = bad user works again when "trustdomain" is listed
as last auth method.
Also clean up some more DC location calls.
(This used to be commit 77a5b1032f)
As abartlet rememberd me NT_STATUS_IS_ERR != !NT_STATUS_IS_OK
This patch will cure the problem.
Working on this one I found 16 functions where I think NT_STATUS_IS_ERR() is
used correctly, but I'm not 100% sure, coders should check the use of
NT_STATUS_IS_ERR() in samba is ok now.
Simo.
(This used to be commit c501e84d41)
that has been authenticated unmapped.
We need to make sure that every caller of idmap handles failure gracefully.
Volker
(This used to be commit 902d607b66)
from the PDC as a mapping to the uid we got from getpwnam in the
local idmap.
This should not be worse than the current state, so I decided to
commit it. It is different from abartlet's preliminary patch, but I
believe this is the better solution. Feel free to comment and/or
revert it.
Volker
(This used to be commit 0c16965e6f)
I'm still not convinced that sharing the option name with the administrative
code is the best idea, but anyway...
Tested by vl, bug #41.
Andrew Bartlett
(This used to be commit 9d78f064c5)
We really need idmap_ldap to have a good solution with ldapsam, porting
it from the prvious code is beeing made, the code is really simple to do
so I am confident it is not a problem to commit this code in.
Not committing it would have been worst.
I really would have been able to finish also the group code, maybe we can
put it into a followin release after 3.0.0 even if it may be an upgrade
problem.
The code has been tested and seem to work right, more testing is needed for
corner cases.
Currently winbind pdc (working only for users and not for groups) is
disabled as I was not able to make a complete group code replacement that
works somewhat in a week (I have a complete patch, but there are bugs)
Simo.
(This used to be commit 0e58085978)
- better error codes than NT_STATUS_UNSUCCESSFUL for domain logon errors
- make auth_winbind load the ntdomain module if winbind isn't there.
- use new trusted domains cache to determine if the domain is valid.
Andrew Bartlett
(This used to be commit ec8d6524c6)
NTLM Authentication:
- Add a 'privileged' mode to Winbindd. This is achieved by means of a directory
under lockdir, that the admin can change the group access for.
- This mode is now required to access with 'CRAP' authentication feature.
- This *will* break the current SQUID helper, so I've fixed up our ntlm_auth
replacement:
- Update our NTLMSSP code to cope with 'datagram' mode, where we don't get a
challenge.
- Use this to make our ntlm_auth utility suitable for use in current Squid 2.5
servers.
- Tested - works for Win2k clients, but not Win9X at present. NTLMSSP updates
are needed.
- Now uses fgets(), not x_fgets() to cope with Squid environment (I think
somthing to do with non-blocking stdin).
- Add much more robust connection code to wb_common.c - it will not connect to
a server of a different protocol version, and it will automatically try and
reconnect to the 'privileged' pipe if possible.
- This could help with 'privileged' idmap operations etc in future.
- Add a generic HEX encode routine to util_str.c,
- fix a small line of dodgy C in StrnCpy_fn()
- Correctly pull our 'session key' out of the info3 from th the DC. This is
used in both the auth code, and in for export over the winbind pipe to
ntlm_auth.
- Given the user's challenge/response and access to the privileged pipe,
allow external access to the 'session key'. To be used for MSCHAPv2
integration.
Andrew Bartlett
(This used to be commit ec071ca3dc)
- user_ok() and user_in_group() now take a list of groups, instead of
looking for the user in the members of all groups.
- The 'server_info' returned from the authentication is now kept around
- in future we won't copy the sesion key, username etc, we will just
referece them directly.
- rhosts upgraded to use the SAM if possible, otherwise fake up based on
getpwnam().
- auth_util code to deal with groups upgraded to deal with non-winbind domain
members again.
Andrew Bartlett
(This used to be commit 74b5436c75)
- use safe_strcpy() instead of pstrcpy() for malloc()ed strings
- CUPS: a failure in an attempt to automaticly add a printer is not level 0 stuff.
- Fix up a possible Realloc() failure segfault
Andrew Bartlett
(This used to be commit c1cfc296c2)
- const for PACKS() in lanman.c
- change auth to 'account before password'
- add help to net rpc {vampire,samsync}
- configure updates for sun workshop cc
- become_root() around pdb_ calls in auth_util for guest login.
Andrew Bartlett
(This used to be commit 43e90eb6e3)
The work here includes:
- metze' set/changed patch, which avoids making changes to ldap on unmodified
attributes.
- volker's group mapping in passdb patch
- volker's samsync stuff
- volkers SAMR changes.
- mezte's connection caching patch
- my recent changes (fix magic root check, ldap ssl)
Andrew Bartlett
(This used to be commit 2044d60bbe)
Samba (ab)uses the returns from getpwnam() a lot - in particular it keeps
them around for a long time - often past the next call...
This adds a getpwnam_alloc and a getpwuid_alloc to the collection.
These function as expected, returning a malloced structure that can be
free()ed with passwd_free(&passwd).
This patch also cuts down on the number of calls to getpwnam - mostly by
taking advantage of the fact that the passdb interface is already
case-insensiteve.
With this patch most of the recursive cases have been removed (that I know
of) and the problems are reduced further by not using the sys_ interface
in the new code. This means that pointers to the cache won't be affected.
(This is a tempoary HACK, I intend to kill the password cache entirly).
The only change I'm a little worried about is the change to
rpc_server/srv_samr_nt.c for private groups. In this case we are getting
groups from the new group mapping DB. Do we still need to check for private
groups? I've toned down the check to a case sensitve match with the new code,
but we might be able to kill it entirly.
I've also added a make_modifyable_passwd() function, that copies a passwd
struct into the form that the old sys_getpw* code provided. As far as I can
tell this is only actually used in the pass_check.c crazies, where I moved
the final 'special case' for shadow passwords (out of _Get_Pwnam()).
The matching case for getpwent() is dealt with already, in lib/util_getent.c
Also included in here is a small change to register the [homes] share at vuid
creation rather than just in one varient of the session setup. (This picks
up the SPNEGO cases). The home directory is now stored on the vuid, and I
am hoping this might provide a saner way to do %H substitions.
TODO: Kill off remaining Get_Pwnam_Modify calls (they are not needed), change
the remaining sys_getpwnam() callers to use getpwnam_alloc() and move
Get_Pwnam to return an allocated struct.
Andrew Bartlett
(This used to be commit 1d86c7f942)
Also set the default value of all the allocated strings to "" to avoid changing
the interface (becouse pdb_get...() would point to a null string, rather than a
null pointer and parts of samba rely on that).
Andrew Bartlett
(This used to be commit 5b4079f748)
Replace this with some flags that *we* define. We can do a mapping later
if we actually get some more reliable info about what passwords are actually
valid.
Andrew Bartlett
(This used to be commit 7f7a42c3e4)
The auth_authsupplied_info typedef is now just a plain struct - auth_context,
but it has been modified to contain the function pointers to the rest
of the auth subsystem's components.
(Who needs non-static functions anyway?)
In working all this mess out, I fixed a number of memory leaks and moved the
entire auth subsystem over to talloc().
Note that the TALLOC_CTX attached to the auth_context can be rather long-lived,
it is provided for things that are intended to live as long. (The
global_negprot_auth_context lasts the whole life of the smbd).
I've also adjusted a few things in auth_domain.c, mainly passing the domain as
a paramater to a few functions instead of looking up lp_workgroup(). I'm
hopign to make this entire thing a bit more trusted domains (as PDC) freindly
in the near future.
Other than that, I moved a bit of the code around, hence the rather messy diff.
Andrew Bartlett
(This used to be commit 12f5515f55)
the method used for checking if a domain is a trusted domain is very
crude, we should really call a backend fn of some sort. For now I'm
using winbindd to do the dirty work.
(This used to be commit adf44a9bd0)
It's just to keep usermanager happy ;-)
clean up a bit samr_query_aliasinfo to return the group description
added: samr_del_aliasmem, samr_del_groupmem and samr_del_domuser
with the correct scripts, you can now entirely manage the users from
usermanager ! Closer to full PDC every day ;-)
J.F.
(This used to be commit 0a727afc66)
subystem.
The particular aim is to modularized the interface - so that we
can have arbitrary password back-ends.
This code adds one such back-end, a 'winbind' module to authenticate
against the winbind_auth_crap functionality. While fully-functional
this code is mainly useful as a demonstration, because we don't get
back the info3 as we would for direct ntdomain authentication.
This commit introduced the new 'auth methods' parameter, in the
spirit of the 'auth order' discussed on the lists. It is renamed
because not all the methods may be consulted, even if previous
methods fail - they may not have a suitable challenge for example.
Also, we have a 'local' authentication method, for old-style
'unix if plaintext, sam if encrypted' authentication and a
'guest' module to handle guest logins in a single place.
While this current design is not ideal, I feel that it does
provide a better infrastructure than the current design, and can
be built upon.
The following parameters have changed:
- use rhosts =
This has been replaced by the 'rhosts' authentication method,
and can be specified like 'auth methods = guest rhosts'
- hosts equiv =
This needs both this parameter and an 'auth methods' entry
to be effective. (auth methods = guest hostsequiv ....)
- plaintext to smbpasswd =
This is replaced by specifying 'sam' rather than 'local'
in the auth methods.
The security = parameter is unchanged, and now provides defaults
for the 'auth methods' parameter.
The available auth methods are:
guest
rhosts
hostsequiv
sam (passdb direct hash access)
unix (PAM, crypt() etc)
local (the combination of the above, based on encryption)
smbserver (old security=server)
ntdomain (old security=domain)
winbind (use winbind to cache DC connections)
Assistance in testing, or the production of new and interesting
authentication modules is always appreciated.
Andrew Bartlett
(This used to be commit 8d31eae52a)
