IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12152
This makes the behaviour of "ctdb addip" similar to "ctdb delip".
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
* Restart after test since test does heavy database manipulation
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
* Have fetch_ring print PNN for clearer output and update patterns in
test script to suit
* Simplify sanity checking pattern due to less data because of
--interactive/-i option
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
* Have message_ring print PNN for clearer output and update patterns
in test script to suit.
* Drop quantitative percentage check since this is hard to predict
when under extreme load. To compensate, tighten up expectations for
the total number of messages in each direction: at least 10 messages
are required over 10 seconds.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This drastically simplifies the code. "ctdb reloadips" behaves the
same, since it causes a takeover run immediately after IPs are
deleted. "ctdb delip" now needs to be followed with an explicit "ctdb
ipreallocate".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Print just the debug level as a description, for both human and
machine readable.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
... instead of --nosetsched command-line option.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Jun 20 20:22:57 CEST 2016 on sn-devel-144
With an empty value the first expression adds a trailing opening
quote, so the second expression doesn't add the closing quote. Handle
this with a special case.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the reclock is set then print it, otherwise print nothing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Anything starting with CTDB_ is appended to each node's configuration
file.
This is made slightly more difficult because the "env" command doesn't
necessarily quote values for consumption by the shell. The strategy
used here is a bit fragile (assumes double-quotes, no nested quotes)
but this is test code and only developers are expected to use this
override.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Tue Mar 1 08:56:09 CET 2016 on sn-devel-144
This uses a configuration file which can be more easily overridden
that explicit command-line options.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Confirm that after re-attaching detached database, it is empty.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This allows for backward compatibility with the current code where
DEBUG_ERR corresponds to "ERR".
Fix the test that relies on "ERR" instead of "ERROR".
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
1. Waiting for generation to change isn't enough. It now changes
early in recovery and reclock might not have been set on all nodes.
So wait until recovery is complete before checking reclock.
2. Use onnode -p when setting reclock on all nodes. That will cause
it to be set quickly on all nodes, to avoid the situation where the
recovery master is the late in the list and resets the reclock on
earlier nodes back to the old value. This shouldn't matter if (1)
is done but it can't hurt.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Add new function delete_ip_from_all_nodes(). Also
ctdb_get_all_pnns().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
None of these uses of -n are particularly useful. "-n all" will be
deprecated.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
In this case: ctdbd_wrapper, onnode, ctdb_diagnostics, ctdb.sudoers.
Set sensible defaults from configure options.
Update documentation to match, trying to fix up anything that has been
missed before.
The onnode unit tests need a symlink to the functions file.
The simple integration tests need to set CTDB_BASE and also
need symlinks to functions/nodes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
fixup
Signed-off-by: Martin Schwenke <martin@meltin.net>
This works around cases where ctdb_transaction gets stuck - this still
needs to be debugged. However, this change will at least cause
individual tests to fail rather than having whole test runs time out.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If CTDB_USE_IPV6 is set then use IPv6 addresses for nodes and public
IPs. This can be useful for some simple tests. However, the node
address actually needs to be on lo so that ctdbd can bind to the port
on that address, so they actually need to be added as root before
running tests, like this:
for i in $(seq 1 10) ; do ip addr add "fc00:10::${i}/64" dev lo ; done
IPv4 127.0.0.0/8 addresses are somehow magic and only one needs to be
on lo so that many can be bound to.
Also change the IPv4 node addresses to be (slightly) more exotic.
For both IPv4 and IPv6, choose addresses that are compatible with
socket wrapper.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: Amitay Isaacs <amitay@gmail.com> (socket wrapper fixes)
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net> (socket wrapper fixes)
Remove --logfile and --syslog daemon options and replace with
--logging.
Modularise and clean up logging initialisation code. The
initialisation API includes an app_name argument that is currently
unused - this will be used in extensions to the syslog backend.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Internally map them to DEBUG_ERR to limit code churn.
This reduces the unwieldy number of debug levels used by CTDB. ALERT
and CRIT aren't of much use as separate errors, since everything from
ERR up should always be logged. In future just ERR can be used.
This also improves compatibility with Samba's debug.c system priority
mapping.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It isn't used and shouldn't be. CTDB can't make the system unusable.
Update associated test to ensure that EMERG isn't attempted. Actually
test all remaining debug levels and modernise the test a bit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
As far as we know, nobody uses this and it just complicates the
logging subsystem.
Remove all ringbuffer code and documentation. Update the local
daemons startup code correspondingly.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Some of this implements logic that exists in functions. Some of it is
overly complicated and potentially failure-prone.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The log ringbuffer will probably be removed. The test can be
implemented just as reliably by checking IP assignments using "ctdb
ip".
Update wait_until_ips_are_on_node() to print a more useful log
message.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The glob functionality is unsed so simplify the code by removing it.
Rename this function to wait_until_ips_are_on_node(). Update all
calls.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
