IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
dcerpc_interface_table struct rather then a tuple of interface
name, UUID and version.
This removes the requirement for having a global list of DCE/RPC interfaces,
except for these parts of the code that use that list explicitly
(ndrdump and the scanner torture test).
This should also allow us to remove the hack that put the authservice parameter
in the dcerpc_binding struct as it can now be read directly from
dcerpc_interface_table.
I will now modify some of these functions to take a dcerpc_syntax_id
structure rather then a full dcerpc_interface_table.
ncacn_ip_tcp/ncalrpc. The problem was that svn revision 11809 removed
the logic that forced the CONNECT auth type for authenticated binds
which don't have an explicit SIGN or SEAL flag set.
This also removes dcerpc_bind_auth_password, the only user of
dcerpc_bind_auth. And this was not only passwords anyway.
Andrew Bartlett, as usual: Please take a close look.
Thanks,
Volker
field, instead put a zero address. Note that zero is correct (ie. we
shouldn't do the lookup) as in the client we want to send a zero for
the server to fill in. When we make this call from the server we fill
in a real IP.
the ejs_echo.c code is the stuff that needs to be auto-generated by
pidl. It only does echo_AddOne so far.
We also need a table for registering these calls. The code is
hard-wired for echo_AddOne for now.
event_context for the socket_connect() call, so that when things that
use dcerpc are running alongside anything else it doesn't block the
whole process during a connect.
Then of course I needed to change any code that created a dcerpc
connection (such as the auth code) to also take an event context, and
anything that called that and so on .... thus the size of the patch.
There were 3 places where I punted:
- abartlet wanted me to add a gensec_set_event_context() call
instead of adding it to the gensec init calls. Andrew, my
apologies for not doing this. I didn't do it as adding a new
parameter allowed me to catch all the callers with the
compiler. Now that its done, we could go back and use
gensec_set_event_context()
- the ejs code calls auth initialisation, which means it should pass
in the event context from the web server. I punted on that. Needs fixing.
- I used a NULL event context in dcom_get_pipe(). This is equivalent
to what we did already, but should be fixed to use a callers event
context. Jelmer, can you think of a clean way to do that?
I also cleaned up a couple of things:
- libnet_context_destroy() makes no sense. I removed it.
- removed some unused vars in various places
We need to pass the 'secure channel type' to the NETLOGON layer, which
must match the account type.
(Yes, jelmer objects to this inclusion of the kitchen sink ;-)
Andrew Bartlett
cli_credentials_set_conf(), not cli_credentials_guess().
Also, clarify why for particular flags, we don't do a DCERPC-level
authentication.
Andrew Bartlett
GENSEC, and to pull SCHANNEL into GENSEC, by making it less 'special'.
GENSEC now no longer has it's own handling of 'set username' etc,
instead it uses cli_credentials calls.
In order to link the credentails code right though Samba, a lot of
interfaces have changed to remove 'username, domain, password'
arguments, and these have been replaced with a single 'struct
cli_credentials'.
In the session setup code, a new parameter 'workgroup' contains the
client/server current workgroup, which seems unrelated to the
authentication exchange (it was being filled in from the auth info).
This allows in particular kerberos to only call back for passwords
when it actually needs to perform the kinit.
The kerberos code has been modified not to use the SPNEGO provided
'principal name' (in the mechListMIC), but to instead use the name the
host was connected to as. This better matches Microsoft behaviour,
is more secure and allows better use of standard kerberos functions.
To achieve this, I made changes to our socket code so that the
hostname (before name resolution) is now recorded on the socket.
In schannel, most of the code from librpc/rpc/dcerpc_schannel.c is now
in libcli/auth/schannel.c, and it looks much more like a standard
GENSEC module. The actual sign/seal code moved to
libcli/auth/schannel_sign.c in a previous commit.
The schannel credentails structure is now merged with the rest of the
credentails, as many of the values (username, workstation, domain)
where already present there. This makes handling this in a generic
manner much easier, as there is no longer a custom entry-point.
The auth_domain module continues to be developed, but is now just as
functional as auth_winbind. The changes here are consequential to the
schannel changes.
The only removed function at this point is the RPC-LOGIN test
(simulating the load of a WinXP login), which needs much more work to
clean it up (it contains copies of too much code from all over the
torture suite, and I havn't been able to penetrate its 'structure').
Andrew Bartlett
The main volume of this patch was what I started working on today:
- Cleans up memory handling around DCE/RPC pipes, to have a parent talloc context.
- Uses sepereate inner loops for some of the DCE/RPC tests
The other and more important part of this patch fixes issues
surrounding the new credentials framwork:
This makes the struct cli_credentials always a talloc() structure,
rather than on the stack. Parts of the cli_credentials code already
assumed this.
There were other issues, particularly in the DCERPC over SMB handling,
as well as little things that had to be tidied up before test_w2k3.sh
would start to pass.
Andrew Bartlett
I wanted to add a simple 'workstation' argument to the DCERPC
authenticated binding calls, but this patch kind of grew from there.
With SCHANNEL, the 'workstation' name (the netbios name of the client)
matters, as this is what ties the session between the NETLOGON ops and
the SCHANNEL bind. This changes a lot of files, and these will again
be changed when jelmer does the credentials work.
I also correct some schannel IDL to distinguish between workstation
names and account names. The distinction matters for domain trust
accounts.
Issues in handling this (issues with lifetime of talloc pointers)
caused me to change the 'creds_CredentialsState' and 'struct
dcerpc_binding' pointers to always be talloc()ed pointers.
In the schannel DB, we now store both the domain and computername, and
query on both. This should ensure we fault correctly when the domain
is specified incorrectly in the SCHANNEL bind.
In the RPC-SCHANNEL test, I finally fixed a bug that vl pointed out,
where the comment claimed we re-used a connection, but in fact we made
a new connection.
This was achived by breaking apart some of the
dcerpc_secondary_connection() logic.
The addition of workstation handling was also propogated to NTLMSSP
and GENSEC, for completeness.
The RPC-SAMSYNC test has been cleaned up a little, using a loop over
usernames/passwords rather than manually expanded tests. This will be
expanded further (the code in #if 0 in this patch) to use a newly
created user account for testing.
In making this test pass test_rpc.sh, I found a bug in the RPC-ECHO
server, caused by the removal of [ref] and the assoicated pointer from
the IDL. This has been re-added, until the underlying pidl issues are
solved.
less likely that anyone will use pstring for new code
- got rid of winbind_client.h from includes.h. This one triggered a
huge change, as winbind_client.h was including system/filesys.h and
defining the old uint32 and uint16 types, as well as its own
pstring and fstring.
accidently have the same protocol id as UUID's)
Before this, Samba would give NDR errors when contacting
a remote server that has IPX support enabled.
This one was on my long due bugs list.
the header, and defined on the wire as a 4 byte network byte order
IP. This means the calling code doesn't have to worry about network
byte order conversions.
- added async support to the negprot client code
- removed two unused parameters from smbcli_full_connection() code
- converted smbclient to use smbcli_full_connection() rather than
reinventing everything itself
token in the client (the final token in the negotiation).
Consequential fixes in the SPNEGO code, which now uses the out.length
as the indicator of 'I need to send something to the other side'.
Merge the NTLM and SPNEGO DCE-RPC authentication routines in the client.
Fix the RPC-MULTIBIND test consequent to this merge.
Andrew Bartlett
- added support for "spnego" in binding strings. This enables SPNEGO
auth in the dcerpc client code, using as many allter_context calls as
are needed
To try SPNEGO do this:
smbtorture ncacn_ip_tcp:SERVER[spnego,seal] -Uadministrator%password RPC-SAMR
- there is no alter_nak or alter_ack packet, its all done in an
alter_response
- auto-allocated the contex_ids
- tried to fix up the dcom code to work again with
alter_context. Jelmer, please take a look :)
dcerpc_alter_context and multiple context_ids in the dcerpc client
library.
This stage does the following:
- split "struct dcerpc_pipe" into two parts, the main part being "struct dcerpc_connection", which
contains all the parts not dependent on the context, and "struct dcerpc_pipe" which has
the context dependent part. This is similar to the layering in libcli_*() for SMB
- disable the current dcerpc_alter code. I've used a #warning until i
get the 2nd phase finished. I don't know how portable #warning is, but
it won't be long before I add full alter context support anyway, so it won't last long
- cleanup the allocation of dcerpc_pipe structures. The previous code
was quite awkward.
