IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This fixes a bug where chgdcpass was on the same IP as localsubdc, and
will avoid similar mistakes in future.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Fri Mar 2 03:48:05 CET 2012 on sn-devel-104
The issue here is that while the single rpc_server process is stuck in
an nss_winbind getpwuid() call, winbindd cannot contact netlogon to
make the connection to the domain.
nss_winbind comes into play when (for s3fs) the
NSS_WRAPPER_WINBIND_SO_PATH environment variable is set. In the
medium term, the unixinfo pipe should either be rewritten fully async
or removed.
Andrew Bartlett
this adds a pipe for STDIN in smbd, nmbd and winbindd when run in
selftest. This allows those processes to detect when they should exit
by looking for EOF on stdin.
This is a regression in 70f4a96c68.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Thu Feb 23 10:55:20 CET 2012 on sn-devel-104
This was found by looking over the lcov output on build.samba.org
The new have_ads() check also now dies if it cannot run smbd, to avoid
this in future.
Andrew Bartlett
As far as I can tell, this simply referred to the posix_s3.sh script
that originally ran these tests.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Thu Feb 16 06:57:09 CET 2012 on sn-devel-104
When make test is run in buildfarm environment (RUN_FROM_BUILD_FARM=1),
last process in make test pipeline is subunit-filter. This subunit-filter
is responsible for converting failure test result to xfail for known
failures. While converting failures to xfail, it sets exitcode=1. If
this is the last process in the pipeline make test fails, which is
the observed behavior in buildfarm.
In autobuild, there is additional process in the pipeline format-subunit
which processes the output of subunit-filter and correctly terminates
with exit code=0. The buildfarm make test failure is fixed by adding
extra filter-subunit in the pipeline, as the extra filter-subunit
exits correctly with exit code=0.
Autobuild-User: Amitay Isaacs <amitay@samba.org>
Autobuild-Date: Fri Feb 3 07:00:04 CET 2012 on sn-devel-104
This includes encrypted reads and writes, both NTLM and kerberos.
Andrew Bartlett
Signed-off-by: Jeremy Allison <jra@samba.org>
Autobuild-User: Jeremy Allison <jra@samba.org>
Autobuild-Date: Sat Jan 28 00:13:57 CET 2012 on sn-devel-104
This also fixes the support for smb sealing with krb5 in make test, as
this now relies on secrets.tdb rather than /etc/krb5.keytab.
Andrew Bartlett
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Sadly this fails in the test environement for now. It needs a /etc/krb5.keytab
which we do not provide.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Fri Jan 13 04:57:22 CET 2012 on sn-devel-104
The memcache test walks the purge functionality. The maximum memcache size also
takes all memcache internal headers into account. Those headers contain
pointers, so on 64-bit they take more space...
Autobuild-User: Volker Lendecke <vlendec@samba.org>
Autobuild-Date: Thu Jan 5 22:01:00 CET 2012 on sn-devel-104
Now tdb2 handles tdb1 files, we don't need most of commit
5eecc85423 which added TDB2 versions of
all the testing tdbs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Mon Dec 12 06:33:44 CET 2011 on sn-devel-104
The extra knownfail and skip entries are for tests the currently do
not pass or hang. We need to work out why this happens, and fix the
test or the test invocation.
Andrew Bartlett
Listing tests that are not ever proposed (eg samba4.* in the samba3 selftest)
is not an error, so just combine the lists.
This is being done because some folks trying to learn how our 'make
test' works are having trouble following the distributed nature of the
selftest system.
Andrew Bartlett
This simplifies the selftest system, and by default we always tested
all of samba3 and samba4 in the waf build. This simply removes a
rarely used option for testing only part of the system. The make test
TESTS="^samba3" syntax remains unchanged, so no functionality is lost.
Andrew Bartlett
This reverts commit 2b47aface4 because
it had a typo in $SIG{CHILD} (it needed to be $SIG{CHLD}), which when
fixed simply broke the whole selftest system.
Andrew Bartlett
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Wed Oct 12 13:50:10 CEST 2011 on sn-devel-104
metze
Signed-off-by: Andreas Schneider <asn@samba.org>
Autobuild-User: Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date: Thu Oct 6 13:49:05 CEST 2011 on sn-devel-104
we can now create a subdomain of an existing windows domain using:
samba-tool domain join sub.domain.dns.name subdomain
The ordering of the creation of the key records is quite tricky,
especially for the NTDSDSA object
Pair-Programmed-With: Andrew Tridgell <tridge@samba.org>
This way only only replicate critical objects during the initial join
as DC, then we'll replicate the whole domain while 'samba' is running.
metze
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Fri Aug 12 14:07:50 CEST 2011 on sn-devel-104
this provides us with both 'standard' and 'single' process models in
selftest, ensuring that we test the standard process model in the
build farm
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Autobuild-User: Andrew Tridgell <tridge@samba.org>
Autobuild-Date: Fri Aug 12 11:06:50 CEST 2011 on sn-devel-104
instead of "state dir" and "cache dir"
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Thu Jul 21 10:06:32 CEST 2011 on sn-devel-104
Eventually we will have just one end point mapper, but for now we need
to use the source4 one for the AD tests.
Andrew Bartlett
Signed-off-by: Andrew Tridgell <tridge@samba.org>
Pair-Programmed-With: Björn Baumbach <bb@sernet.de>
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Fri Jun 24 20:35:30 CEST 2011 on sn-devel-104
Modern versions of gdb are better than us at working out what binary
is running, and so it is more reliable to omit the binary argument.
This change is required because samba4 no longer supplies this
argument.
Andrew Bartlett
The debugger or script will need to work out the binary from the PID,
as %PROG% support was lost when the setup_fault() code was merged
between Samba3 and Samba4.
Andrew Bartlett
We need to reset the umask in order to set to the desired permissions.
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Mon May 23 13:26:33 CEST 2011 on sn-devel-104
This will make it easier to write code that uses the whole codebase.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Mon May 9 12:25:33 CEST 2011 on sn-devel-104
This environment uses pdb_samba4 and auth_samba4 to plug these
critical subsystems into a mixed Samba3/Samba4 DC, in a similar way to
the 'Franky' proposal.
Andrew Barltett
This removes the need for acls on the filesystem for simple domain
member tests. ACL tests should be written at some point...
Andrew Bartlett
Pair-Programmed-With: Andrew Tridgell <tridge@samba.org>
The previous code was too subtle, and tried to filter via two xfail
scripts. The --fail-immediately for the source3 knownfail would then
fail samba4 know failures.
Andrew Bartlett
Pair-Programmed-With: Andrew Tridgell <tridge@samba.org>
These tests can't run on systems without posix ACLs.
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Thu Apr 28 06:18:59 CEST 2011 on sn-devel-104
This checks that Samba3 joins Samba4 correctly, and allows NTLM and
Kerberos logons from a live Samba4 DC.
This needs the common krb5.conf generation logic, and because we now
override KRB5_CONFIG we must update ktest to have a valid krb5.conf.
Based on an original patch by metze
Andrew Bartlett
this prevents error messages from logfile creation before smb.conf is
read
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Autobuild-User: Andrew Tridgell <tridge@samba.org>
Autobuild-Date: Thu Apr 28 05:29:19 CEST 2011 on sn-devel-104
this check was causing the CP850 warning in the combined build, as the
s3 tests want CP850, but we don't have builtin support for that
charset
Pair-Programmed-With: Andrew Bartlett <abartlet@samba.org>
Autobuild-User: Andrew Tridgell <tridge@samba.org>
Autobuild-Date: Wed Apr 27 09:31:44 CEST 2011 on sn-devel-104
By reworking the 'fake DNS' file to use struct dns_rr_srv it should be
possible to emulate that resolver layer as well as the Samba4
sockaddr_storage* based layer. This will then give us a common DNS
emulation for 'make test'.
Andrew Bartlett
This helps ensure that we don't have the Samba3 servers stop before
the full make test is finished.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Tue Apr 19 09:03:07 CEST 2011 on sn-devel-104
To work around environment variable handling, the initialisation of
NSS_WRAPPER_WINBIND_SO_PATH is pushed in to Samba3.pm (the s3 autoconf
build still overrides this)
Andrew Bartlett
This reduces some of the clutter when we have quite so many server
configurations starting.
The one case that actually needs an alias (dc environment for the
test_nmblookup.sh test) will still keep it.
Andrew Bartlett
This will help us have a top level 'make test', working around the
fact that the --eanble-s3build has different names for some of these
binaries, without fixing the names forever (we can just change the
mapping later).
Andrew Bartlett
This will allow a mapping to be made between things like smbtorture4
-> smbtorture that is correct for the different build environments.
Andrew Bartlett
This removes the exit(1) that previously didn't tear down the
environment correctly, and instead just fails to set it up, allowing
the rest of the script handle that with more grace.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Tue Apr 12 01:53:37 CEST 2011 on sn-devel-104
The "rpc_proxy" should behave like "member", just with a different
configuration.
metze
Autobuild-User: Stefan Metzmacher <metze@samba.org>
Autobuild-Date: Thu Apr 7 15:52:25 CEST 2011 on sn-devel-104
This ensures we don't use netbios before the hosts file and that we do
fill in the fake DNS zone correctly for the way we invoke smbtorture4.
Currently this works because the realm in client.conf is "", if this
changes then this will need to change too (perhaps an additional
entry).
Andrew Bartlett
It is important that a machine account password change does not
invalidate existing tickets.
This is only for the default kerberos method with a password in
secrets.tdb. The keytab based methods are still not tested.
Andrew Bartlett
Autobuild-User: Andrew Bartlett <abartlet@samba.org>
Autobuild-Date: Wed Apr 6 05:24:48 CEST 2011 on sn-devel-104
NBT lookups cause trouble and variablity in 'make test', so it's much
better if we just use the fake DNS code. This code is only used by
smbtorture4 at this time, but the other client tools are generally
told to contact by IP address.
We need to contact by name to test Kerberos, and this should make the
kerberos tests much more reliable.
Andrew Bartlett
Following Tridge's advice, we need to have no input (/dev/null) and
-batch for reliable opeation on big backtraces.
We should also use --pid, and let gdb find the binary
Andrew Bartlett