IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In librpc, always try SMB level authentication, even if trying
schannel, but allow fallback to anonymous. This should better
function with servers that set restrict anonymous.
There are too many parts of Samba that get, parse and modify the
binding parameters. Avoid the extra work, and add a binding element
to the struct dcerpc_pipe
The libnet vampire code has been refactored, to reduce extra layers
and to better conform with the standard argument pattern. Also, take
advantage of the new libnet_Lookup code, so we don't require the silly
'password server' smb.conf parameter.
To better support forcing traffic to be sealed for the vampire
operation, the dcerpc_bind_auth() function now takes an auth level
parameter.
Andrew Bartlett
(This used to be commit d65b354959)
dcerpc_interface_table struct rather then a tuple of interface
name, UUID and version.
This removes the requirement for having a global list of DCE/RPC interfaces,
except for these parts of the code that use that list explicitly
(ndrdump and the scanner torture test).
This should also allow us to remove the hack that put the authservice parameter
in the dcerpc_binding struct as it can now be read directly from
dcerpc_interface_table.
I will now modify some of these functions to take a dcerpc_syntax_id
structure rather then a full dcerpc_interface_table.
(This used to be commit 8aae0f168e)
instead make the normal composite_done() and composite_error()
functions automatically trigger a delayed callback if the caller has
had no opportunity to setup a async callback
this removes one of the common mistakes in writing a composite function
(This used to be commit f9413ce792)
This also removes dcerpc_bind_auth_password, the only user of
dcerpc_bind_auth. And this was not only passwords anyway.
Andrew Bartlett, as usual: Please take a close look.
Thanks,
Volker
(This used to be commit 2ff2dae3d0)
Tridge et al, please take a close look at this. It survives my basic rpc-login
test as well as rpc-lsa, but this is critical I think.
Volker
(This used to be commit bf1a55f44c)
requirements, and for better error reporting.
In particular, the composite session setup (extended security/SPNEGO)
code now returns errors, rather than NT_STATUS_NO_MEMORY. This is
seen particularly when GENSEC fails to start.
The tighter interface rules apply to NTLMSSP, which must be called
exactly the right number of times. This is to match some of our other
less-tested modules, where adding flexablity is harder. (and this is
security code, so let's just get it right). As such, the DCE/RPC and
LDAP clients have been updated.
Andrew Bartlett
(This used to be commit 134550cf75)
event_context for the socket_connect() call, so that when things that
use dcerpc are running alongside anything else it doesn't block the
whole process during a connect.
Then of course I needed to change any code that created a dcerpc
connection (such as the auth code) to also take an event context, and
anything that called that and so on .... thus the size of the patch.
There were 3 places where I punted:
- abartlet wanted me to add a gensec_set_event_context() call
instead of adding it to the gensec init calls. Andrew, my
apologies for not doing this. I didn't do it as adding a new
parameter allowed me to catch all the callers with the
compiler. Now that its done, we could go back and use
gensec_set_event_context()
- the ejs code calls auth initialisation, which means it should pass
in the event context from the web server. I punted on that. Needs fixing.
- I used a NULL event context in dcom_get_pipe(). This is equivalent
to what we did already, but should be fixed to use a callers event
context. Jelmer, can you think of a clean way to do that?
I also cleaned up a couple of things:
- libnet_context_destroy() makes no sense. I removed it.
- removed some unused vars in various places
(This used to be commit 3a3025485b)
GENSEC, and to pull SCHANNEL into GENSEC, by making it less 'special'.
GENSEC now no longer has it's own handling of 'set username' etc,
instead it uses cli_credentials calls.
In order to link the credentails code right though Samba, a lot of
interfaces have changed to remove 'username, domain, password'
arguments, and these have been replaced with a single 'struct
cli_credentials'.
In the session setup code, a new parameter 'workgroup' contains the
client/server current workgroup, which seems unrelated to the
authentication exchange (it was being filled in from the auth info).
This allows in particular kerberos to only call back for passwords
when it actually needs to perform the kinit.
The kerberos code has been modified not to use the SPNEGO provided
'principal name' (in the mechListMIC), but to instead use the name the
host was connected to as. This better matches Microsoft behaviour,
is more secure and allows better use of standard kerberos functions.
To achieve this, I made changes to our socket code so that the
hostname (before name resolution) is now recorded on the socket.
In schannel, most of the code from librpc/rpc/dcerpc_schannel.c is now
in libcli/auth/schannel.c, and it looks much more like a standard
GENSEC module. The actual sign/seal code moved to
libcli/auth/schannel_sign.c in a previous commit.
The schannel credentails structure is now merged with the rest of the
credentails, as many of the values (username, workstation, domain)
where already present there. This makes handling this in a generic
manner much easier, as there is no longer a custom entry-point.
The auth_domain module continues to be developed, but is now just as
functional as auth_winbind. The changes here are consequential to the
schannel changes.
The only removed function at this point is the RPC-LOGIN test
(simulating the load of a WinXP login), which needs much more work to
clean it up (it contains copies of too much code from all over the
torture suite, and I havn't been able to penetrate its 'structure').
Andrew Bartlett
(This used to be commit 2301a4b38a)
I wanted to add a simple 'workstation' argument to the DCERPC
authenticated binding calls, but this patch kind of grew from there.
With SCHANNEL, the 'workstation' name (the netbios name of the client)
matters, as this is what ties the session between the NETLOGON ops and
the SCHANNEL bind. This changes a lot of files, and these will again
be changed when jelmer does the credentials work.
I also correct some schannel IDL to distinguish between workstation
names and account names. The distinction matters for domain trust
accounts.
Issues in handling this (issues with lifetime of talloc pointers)
caused me to change the 'creds_CredentialsState' and 'struct
dcerpc_binding' pointers to always be talloc()ed pointers.
In the schannel DB, we now store both the domain and computername, and
query on both. This should ensure we fault correctly when the domain
is specified incorrectly in the SCHANNEL bind.
In the RPC-SCHANNEL test, I finally fixed a bug that vl pointed out,
where the comment claimed we re-used a connection, but in fact we made
a new connection.
This was achived by breaking apart some of the
dcerpc_secondary_connection() logic.
The addition of workstation handling was also propogated to NTLMSSP
and GENSEC, for completeness.
The RPC-SAMSYNC test has been cleaned up a little, using a loop over
usernames/passwords rather than manually expanded tests. This will be
expanded further (the code in #if 0 in this patch) to use a newly
created user account for testing.
In making this test pass test_rpc.sh, I found a bug in the RPC-ECHO
server, caused by the removal of [ref] and the assoicated pointer from
the IDL. This has been re-added, until the underlying pidl issues are
solved.
(This used to be commit 824289dcc2)
that the GENSEC mechanism wishes to select. It is of course up to the
GENSEC mech and the remote server to actually support this however...
Andrew Bartlett
(This used to be commit 7200a01545)
token in the client (the final token in the negotiation).
Consequential fixes in the SPNEGO code, which now uses the out.length
as the indicator of 'I need to send something to the other side'.
Merge the NTLM and SPNEGO DCE-RPC authentication routines in the client.
Fix the RPC-MULTIBIND test consequent to this merge.
Andrew Bartlett
(This used to be commit 43e3516fc0)
- added support for "spnego" in binding strings. This enables SPNEGO
auth in the dcerpc client code, using as many allter_context calls as
are needed
To try SPNEGO do this:
smbtorture ncacn_ip_tcp:SERVER[spnego,seal] -Uadministrator%password RPC-SAMR
(This used to be commit 9c0a3423f0)
- there is no alter_nak or alter_ack packet, its all done in an
alter_response
- auto-allocated the contex_ids
- tried to fix up the dcom code to work again with
alter_context. Jelmer, please take a look :)
(This used to be commit dd1c54add8)
dcerpc_alter_context and multiple context_ids in the dcerpc client
library.
This stage does the following:
- split "struct dcerpc_pipe" into two parts, the main part being "struct dcerpc_connection", which
contains all the parts not dependent on the context, and "struct dcerpc_pipe" which has
the context dependent part. This is similar to the layering in libcli_*() for SMB
- disable the current dcerpc_alter code. I've used a #warning until i
get the 2nd phase finished. I don't know how portable #warning is, but
it won't be long before I add full alter context support anyway, so it won't last long
- cleanup the allocation of dcerpc_pipe structures. The previous code
was quite awkward.
(This used to be commit 4004c69937)
by making our gensec structures a talloc child of the open connection
we can be sure that it will be destroyed when the connection is
dropped.
(This used to be commit f12ee2f241)
This means that 'require NTLMv2 session security' now works for RPC
pipe signing. We don't yet have sealing, but it can't be much further.
This is almost all tridge's code, munged into a form that can work
with the GENSEC API.
This commit also includes more lsakey fixes - that key is used for all
DCE-RPC level authenticated connections, even over CIFS/ncacn_np.
No doubt I missed something, but I'm going to get some sleep :-)
Andrew Bartlett
(This used to be commit a1fe175eec)
generate a separate *_send() async function for every RPC call, and
there is a single dcerpc_ndr_request_recv() call that processes the
receive side of any rpc call. The caller can use
dcerpc_event_context() to get a pointer to the event context for the
pipe so that events can be waited for asynchronously.
The only part that remains synchronous is the initial bind
calls. These could also be made async if necessary, although I suspect
most applications won't need them to be.
(This used to be commit f5d004d8eb)
The bug (found by tridge) is that Win2k3 is being tighter about the
NTLMSSP flags. If we don't negotiate sealing, we can't use it.
We now have a way to indicate to the GENSEC implementation mechanisms
what things we want for a connection.
Andrew Bartlett
(This used to be commit 86f61568ea)
This implements gensec for Samba's server side, and brings gensec up
to the standards of a full subsystem.
This means that use of the subsystem is by gensec_* functions, not
function pointers in structures (this is internal). This causes
changes in all the existing gensec users.
Our RPC server no longer contains it's own generalised security
scheme, and now calls gensec directly.
Gensec has also taken over the role of auth/auth_ntlmssp.c
An important part of gensec, is the output of the 'session_info'
struct. This is now reference counted, so that we can correctly free
it when a pipe is closed, no matter if it was inherited, or created by
per-pipe authentication.
The schannel code is reworked, to be in the same file for client and
server.
ntlm_auth is reworked to use gensec.
The major problem with this code is the way it relies on subsystem
auto-initialisation. The primary reason for this commit now.is to
allow these problems to be looked at, and fixed.
There are problems with the new code:
- I've tested it with smbtorture, but currently don't have VMware and
valgrind working (this I'll fix soon).
- The SPNEGO code is client-only at this point.
- We still do not do kerberos.
Andrew Bartlett
(This used to be commit 07fd885fd4)
This layer is used for DCERPC security, as well as ntlm_auth at this
time. It expect things like SASL and the CIFS layer to use it as
well.
The particular purpose of this layer is to introduce SPENGO, which
needs generic access to the actual implementation mechanisms.
Schannel, due to it's 'interesting' setup properties is in GENSEC, but
is only in the RPC code.
Andrew Bartlett
(This used to be commit 902af49006)
and schannel are both instances of possible security modules
- added schannel sign and sign/seal support to the dcerpc client
code. You select it with binding options of "schannel,sign" or
"schannel,seal".
(This used to be commit 05db0b9d94)
* moved ntlmssp code into libcli/auth/, and updated to latest ntlmssp
code from samba3 (thanks Andrew! the new interface is great)
* added signing/ntlmssp support in the dcerpc code
* added a dcerpc_auth.c module for the various dcerpc auth mechanisms
(This used to be commit c18c9b5585)
