IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
We were instead only checking the expected error.
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We allow a timeout of 2x over to avoid this being a flapping test.
Samba is not very accurate on the timeout, which is not otherwise an
issue but makes this test fail sometimes.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14694
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Validate Writes and Control Access Rights should only grant access if the
object is of the type listed in the Right's appliesTo attribute.
Tests to verify this behavior
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14832
Signed-off-by: Nadezhda Ivanova <nivanova@symas.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Without these calls the tests could pass if an expected error did not
occur.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14832
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
[abartlet@samba.org Included in backport as changing ACLs while
ACL tests are not checking for unexpected success would be bad]
This new restriction breaks a large number of assumptions in the tests, like
that you can remove some UF_ flags, because it turns out doing so will
make the 'computer' a 'user' again, and this will fail.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14753
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This favors a test that confirms we got an error over getting exactly
the right error, at least for now.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14753
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Objects of objectclass computer are computers by default now and this changes
the sAMAccountType and primaryGroupID as well as userAccountControl
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14753
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
We now enforce that a trust account must be a user.
These can not be added over LDAP anyway, and our C
code in the RPC server gets this right in any case.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14753
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
The parts that create and delete a single object can be
safely split out into an individual test.
At this point the parts that fail against Windows 2019 are:
error: __main__.SamTests.test_userAccountControl_computer_add_normal [
_ldb.LdbError: (53, 'LDAP error 53 LDAP_UNWILLING_TO_PERFORM - <0000052D: SvcErr: DSID-031A1236, problem 5003 (WILL_NOT_PERFORM), data 0\n> <>')
error: __main__.SamTests.test_userAccountControl_computer_modify [
_ldb.LdbError: (53, 'LDAP error 53 LDAP_UNWILLING_TO_PERFORM - <0000052D: SvcErr: DSID-031A1236, problem 5003 (WILL_NOT_PERFORM), data 0\n> <>')
error: __main__.SamTests.test_userAccountControl_user_add_0_uac [
_ldb.LdbError: (53, 'LDAP error 53 LDAP_UNWILLING_TO_PERFORM - <0000052D: SvcErr: DSID-031A1236, problem 5003 (WILL_NOT_PERFORM), data 0\n> <>')
error: __main__.SamTests.test_userAccountControl_user_add_normal [
_ldb.LdbError: (53, 'LDAP error 53 LDAP_UNWILLING_TO_PERFORM - <0000052D: SvcErr: DSID-031A1236, problem 5003 (WILL_NOT_PERFORM), data 0\n> <>')
error: __main__.SamTests.test_userAccountControl_user_modify [
_ldb.LdbError: (53, 'LDAP error 53 LDAP_UNWILLING_TO_PERFORM - <0000052D: SvcErr: DSID-031A1236, problem 5003 (WILL_NOT_PERFORM), data 0\n> <>')
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14753
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Objects with objectclass computer now have UF_WORKSTATION_TRUST_ACCOUNT
by default and so this test must adapt.
The changes to this test passes against Windows 2019 except for
the new behaviour around the UF_WORKSTATION_TRUST_ACCOUNT default.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14753
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This makes many of our tests pass again. We do not pass against Windows 2019 on all
as this does not have this restriction at this time.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14753
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This helps ensure we cover off all the cases that matter
for objectclass/trailing-doller/userAccountControl
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14753
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This will allow these to be listed in a knownfail shortly.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14753
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This allows future patches to restrict changing the account type
without triggering an error.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14753
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
The idea here is to split out the restrictions seen on Windows 2019
at the schema level, as seen when acting as an administrator.
These pass against Windows 2019 except for the account type swapping
which is not wanted.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14753
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This changes most of the simple pattern with self.samdb.modify()
to use the wrapper. Some other calls still need to be converted, while
the complex decision tree tests should remain as-is for now.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Mon Oct 4 21:55:43 UTC 2021 on sn-devel-184
This is easier to reason with regarding which cases should work
and which cases should fail, avoiding issues where more success
than expected would be OK because a self.fail() was missed in a
try: block.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This gets us closer to passing against Windows 2019, without
making major changes to what was tested. More tests are needed,
but it is important to get what was being tested tested again.
Account types (eg UF_NORMAL_ACCOUNT, UF_WORKSTATION_TRUST_ACCOUNT)
are now required on all objects, this can't be omitted any more.
Also for UF_NORMAL_ACCOUNT for these accounts without a password
set |UF_PASSWD_NOTREQD must be included.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Sep 15 08:49:11 UTC 2021 on sn-devel-184
Signed-off-by: Joseph Sutton <josephsutton@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This generates a single test per bit which is easier to
debug. Elsewhere we use this pattern where we want to
be able to put some cases in a knownfail, which is otherwise
not possible.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This generates a single test per bit which is easier to
debug. Elsewhere we use this pattern where we want to
be able to put some cases in a knownfail, which is otherwise
not possible.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This is a nice easy example of how the test generation
code works, and it combined nicely with the earlier
patch to return string names from the UF_ constants.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
self.addCleanup() is called regardless of the test failure or error status
and so is more reliable, particularly during development.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
We set and use a single self.OU to ensure consistancy and
reduce string duplication.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This made Python 2's print behave like Python 3's print().
In some cases, where we had:
from __future__ import print_function
"""Intended module documentation..."""
this will have the side effect of making the intended module documentation
work as the actual module documentation (i.e. becoming __doc__), because
it is once again the first statement in the module.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Björn Baumbach <bb@sernet.de>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Douglas Bagnall <dbagnall@samba.org>
Autobuild-Date(master): Wed Nov 4 00:19:25 UTC 2020 on sn-devel-184
This tests a sorts of combinations in order to
demonstrate the visibility of objects depending on:
- with or without fDoListObject
- with or without explicit DENY ACEs
- A hierachy of objects with 4 levels from the base dn
- SEC_ADS_LIST (List Children)
- SEC_ADS_LIST_LIST_OBJECT (List Object)
- SEC_ADS_READ_PROP
- all possible scopes and basedns
This demonstrates that NO_SUCH_OBJECT doesn't depend purely
on the visibility of the base dn, it's still possible to
get children returned und an invisible base dn.
It also demonstrates the additional behavior with "List Object" mode.
See [MS-ADTS] 5.1.3.3.6 Checking Object Visibility
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14531
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
The remaining compat code (get_string, get_bytes,
cmp) are useful helper routines which we should
simply merge into common (especially since there
is some duplication here).
Signed-off-by: David Mulder <dmulder@suse.com>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): David Mulder <dmulder@samba.org>
Autobuild-Date(master): Fri Oct 2 14:49:36 UTC 2020 on sn-devel-184
As tested against Windows Server 1709
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14364
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Thanks to Andrei Popa <andrei.popa@next-gen.ro> for finding,
reporting and working with us to diagnose this issue!
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14331
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
This type of object was not possible to delete in Samba without first removing
the link.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14306
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
TestCase.assertEquals() is an alias for TestCase.assertEqual() and
has been deprecated since Python 2.7.
When we run our tests with in python developer mode (`PYTHONDEVMODE=1
make test`) we get 580 DeprecationWarnings about this.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Reviewed-by: Noel Power <npower@samba.org>
Incremental results are provided by a flag on the dirsync control, not
by changing the attribute name.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14040
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
This demonstrates a problems that the extended_dn returned
by the dirsync module always uses the SDDL format for GUID/SID
components.
Azure AD connect reports discovery errors:
reference-value-not-ldap-conformant
for attributes member and manager.
The key is that it sends the LDAP_SERVER_EXTENDED_DN_OID without
an ExtendedDNRequestValue blob, which means the flag value should
be treated as 0 and the HEX string format should be used.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=14153
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
