IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This variable points to /etc/ by default.
This distinguishes it from the different variable from wscript, which
points to /etc/ctdb/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Clearly identifies where all state files from scripts should go and
allows that location to be easily changed. This patch should not
change any behaviour (outside of eventscript unit tests, where a
clearer location is now used).
CTDB_VARDIR should no longer be overridden. Continue to set
CTDB_DBDIR and similar to override database location in unit tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Always check filesystem usage for the database directories.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Sat Aug 29 20:08:48 CEST 2015 on sn-devel-104
CTDB should warn by default if too much system memory or swap is used.
The tests have also been tweaked. In particular, the filesystem-only
tests need to initialise the memory information to avoid errors where
meminfo isn't set.
Document the defaults, warning against disabling them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
They are only printed when the percentage usage changes. This should
stop the logs from being filled with warnings.
Add a test for the throttling.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Marking the node unhealthy should cause Samba processes to close,
possible freeing a stack of memory. If not, then it is somebody
else's problem.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
New variables CTDB_MONITOR_MEMORY_USAGE and CTDB_MONITOR_SWAP_USAGE.
Both take a pair of <warn_threshold>:<unhealthy_threshold> where each
theshold is specified as a percentage.
This adds a callout to check_thresholds() that is run when the
unhealthy threshold is reached.
Add some combination tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB_MONITOR_FREE_MEMORY and CTDB_MONITOR_FREE_MEMORY_WARN are now
percentages that specify thresholds of acceptable memory usage.
Memory/swap usage in tests also specified as percentages.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
No need to use 2 different sources of information for similar checks.
Also, output of free has been changed, whereas /proc/meminfo is a
kernel API, which will not change.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To support this, extend the "ip route add" stub to detect duplicate
routes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Fri Aug 7 08:37:38 CEST 2015 on sn-devel-104
Unhealthy after 1 failed attempt to contact the portmapper.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is now handled by passing the desired number of threads to the
command specified in the dump_stuck_threads variable in .check files.
Remove unused function nfs_dump_some_threads().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This isn't a straightforward move of code from 60.ganesha to the
callout. Simplifications have been made to allow better
interoperation with the new NFS checking logic.
The following configuration variables have been removed:
CTDB_GANESHA_REC_SUBDIR
Edit NFS ganesha callout to change this location
CTDB_NFS_SERVER_MODE, NFS_SERVER_MODE
Use CTDB_NFS_CALLOUT instead
CTDB_NFS_SKIP_KNFSD_ALIVE_CHECK, CTDB_SKIP_GANESHA_NFSD_CHECK
Disable the corresponding .check file instead
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
$service_check_cmd specifies a command to run instead of the regular
rpcinfo-based check.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is now always enabled. If nfsd thread monitoring is not required
then make CTDB_NFS_CALLOUT point to a wrapper around
nfs-linux-kernel-callout that does not implement "monitor-post".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Note that the 60.ganesha RPC checks need to be identical to those in
the nfs-checks.d/ directory. This is because the NFS unit test
infrastructure checks output against what should be produced by the
checks in nfs-checks.d/. This is a minor issue, since one of the aims
of this work is to remove the need for a separate 60.ganesha.
In most cases configuration variable CTDB_NFS_DUMP_STUCK_THREADS is
now ignored. This is now handled by passing the desired number of
threads to the command specified in the service_debug_cmd variable in
a .check file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Change status, nlockmgr, mountd, rquotad to be unhealthy after 6
rpcinfo check failures and do a verbose restart after every 2
failures. Change 60.ganesha for consistency, since 60.ganesha tests
are broken and depend on the consistency.
Apart from the consistency aspect, the check infrastructure will soon
be simplified so that it only allows the equivalent of "unhealthy" and
"verbose restart:b" actions.
Update tests to have a corresponding numbers of iterations. Run 1
extra iteration in most tests to check there are no unexpected
behaviour changes after the designated number of iterations completes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
They are contrived and hard to read. Better to just enumerate the few
sub-tests in these testcases.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
A useful baseline test to ensure that certain things (e.g. rpcinfo)
aren't consistently broken.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This means that required result will not be calculated on each
iteration. This is useful in baseline tests where, say, all
iterations should succeed and produce no output. This is useful for
confirming that the eventscript and test infrastructure is working
correctly.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Much clearer than using iterate_test() for this purpose. This also
does failover counting by calling rpcinfo in each iteration.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It needs to have a default for the standalone case, when it is not run
in a loop inside "ip addr show".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
60.nfs backgrounds it so it persists in the background causing
problems. In particular, it causes the "ctdb ip" command stub to be
run in parallel, which produces inconstent results.
Better not to run it at all in the NFS tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Thu Jul 9 09:27:02 CEST 2015 on sn-devel-104
This code was copied from onnode unit tests, but not used.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This is now achieved by defining functions extra_header() and
extra_footer().
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
On IPv4-only or IPv6-only systems one of these files will not exist.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
00.ctdb should not know about public IP addresses.
Move related tests to operate on 10.interface.
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
ctdb_get_pnn() incorrectly caches to the same file regardless of what
node is selected via FAKE_CTDB_PNN.
Instead, set the PNN using new function ctdb_get_pnn(), which also
makes CTDB_VARDIR point to a node-specific subdirectory. This means
that ctdb_get_pnn() will correctly cache to the node-specific
directory.
Fake tickle and TDB files/directories used by the ctdb stub need to be
the same across all PNNs, so change these to use
$EVENTSCRIPTS_TESTS_VAR_DIR instead of node-specific $CTDB_VARDIR.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use -T tcp instead of deprecated options -u and -t. Also, check for
localhost.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Mar 27 09:16:50 CET 2015 on sn-devel-104
When executing a shell script code "foo | bar", if "bar" terminates early,
then "foo" can get I/O error when writing to stdout.
The tdbtool stub did not wait to read anything from stdin when it is
expected to. This would cause tests to fail randomly under load when
tdbtool process exited early.
Similarly, debug function read from stdin only under certain conditions
(higher debug and when not reading from tty). Otherwise, exited early.
Thanks to Andrew Bartlett for noticing the problem and Catalyst Cloud
(http://catalyst.net.nz/cloud) for providing resources to test fixes.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Pair-Programmed-With: Martin Schwenke <martin@meltin.net>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Fri Mar 20 16:26:37 CET 2015 on sn-devel-104
