IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
This drastically simplifies the code. "ctdb reloadips" behaves the
same, since it causes a takeover run immediately after IPs are
deleted. "ctdb delip" now needs to be followed with an explicit "ctdb
ipreallocate".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This avoids CTDB spending too much time processing multiple packets and
return to the event loop sooner.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This controls the maximum size of data ctdb will read from sockets at
a time.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
No preamble, just print keyword ENABLED or DISABLED. Fix the
documentation to reflect this and remove the text that is simply
wrong.
Also remove output from "ctdb enablemonitor" and "ctdb disablemonitor"
on success. This is just noise.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This limitation can be removed with a reasonable amount of effort. It
probably isn't worth doing until the public IP address configuration
is stored in a cluster-wide database. That seems like the right time
to change the API to handle the details that
CTDB_CONTROL_GET_PUBLIC_IPS doesn't currently retrieve.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Databases should never be thawed manually. A database recovery will
correctly thaw all databases. Otherwise there is a bug in the database
recovery.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This generates takeip-pre and releaseip-pre call-out events.
One use is to put NFS into grace before an IP is assigned to an
interface.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The recovery lock can not be reliably updated at run-time. If it
fails to update on some nodes then split-brain protection is gone and
there is no reasonable way to repair the situation. CTDB will have to
be restarted on all nodes. So, if this feature is being used to avoid
scheduling an outage then an outage will have to be scheduled just in
case!
To update the recovery lock, shut down CTDB on all nodes, reconfigure
the recovery lock and start CTDB again.
Those that *really* want to be able to change the recovery lock at
run-time can still do so. Set CTDB_RECOVERY_LOCK to point to a script
and this script can then be modified at run-time. However, please
don't report bugs if bad things happen...
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Sat May 14 03:06:05 CEST 2016 on sn-devel-144
Add CTDB_NFS_STATE_FS_TYPE and CTDB_NFS_STATE_MNT config options, show use in
nfs-ganesha-callout. Since the callout script is only an example, we
officially don't have default values for these.
Signed-off-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Comment typos and clarifications, erroneous variable names, corrected
pathnames, reorganizing variables, and squashing a few non-fatal
scripting errors.
Signed-off-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This currently fails exactly when it is needed: when there is a
dangling link pointing into an unmounted filesystem. This happens
because [ -e <dangling-link> ] returns false. The solution is simply
to remove that check.
Now the first condition in the "if" statement catches the backward
compatibility case where $GANRECDIR used to be a directory. It will
also catch other problems, such as if a file has been created in this
location. If nothing exists then it will silently succeed (due to
-f).
The second case catches a symlink pointing to the wrong place (e.g. in
an unmounted filesystem).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The underlying change is to allow the cluster mutex argstring to
optionally contain a helper command. When the argument string starts
with '!' then the first word is the helper command to run. This is
now the standard way of changing the helper from the default.
CTDB_CLUSTER_MUTEX_HELPER show now only be used to change the location
of the default helper when testing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
If the reclock is set then print it, otherwise print nothing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
LVS and NAT gateway support had bit-rotted. We don't use any of these
in scripts/tests and we very much doubt anyone else uses them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Apr 25 10:34:47 CEST 2016 on sn-devel-144
This can list the different aspects of status: master, list, status.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
For "master", if there is a master then print the PNN, otherwise print
nothing.
For "list", print the PNN and IP addresses without a colon in between.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This simply calls out to the wrapper, so that commands are changed as
follows:
ctdb lvsmaster -> ctdb lvs master
ctdb lvs -> ctdb lvs list
This provides a simple, extensible interface and means that "ctdb lvs
status" is also available.
Unit tests are streamlined so that there is a single test for each
CTDB state. Each test does "master", "list" and "status" sub-tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To keep this commit comprehensible, 91.lvs and the CTDB CLI tool are
temporarily inconsistent. The tool will be made consistent in a
subsequent commit.
LVS now uses a configuration file specified by CTDB_LVS_NODES and
supports the same slave-only syntax as CTDB_NATGW_NODES. LVS also
uses new variable CTDB_LVS_PUBLIC_IFACE instead of
CTDB_PUBLIC_INTERFACE.
Update unit tests and documentation.
Note that the --lvs and --single-public-ip daemon options are no
longer used. These will be removed and relevant documentation
updated in a subsequent commit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This will be used to limit the size of record buffer sent in newer
controls for recovery and existing controls for vacuuming.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
This was a workaround for trying to ensure public IP addresses are
properly rebalanced after running "ctdb addip" on multiple nodes.
"ctdb reloadips" is a better solution.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is undocumented and is not needed. It was a workaround for
trying to ensure public IP addresses are properly rebalanced after
running "ctdb addip" on multiple nodes. "ctdb reloadips" is a better
solution.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To keep this commit comprehensible, 11.natgw and the CTDB CLI tool are
temporarily inconsistent. The tool will be made consistent in a
subsequent commit.
ctdb_natgw_slave_only() is reimplemented to check for the option in
the appropriate line in $CTDB_NATGW_NODES.
Update unit tests and documentation.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This has always been the case. Now it is documented and enforced.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Move information about TCP connection tracking and resetting into
ctdb.7.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This only applies to monitor events so renaming clarifies this.
Note that this change is not backward compatible. Users with
CTDB_SET_EventScriptTimeoutCount=<n>
in their configuration will get failures when starting CTDB but the
cause will be clearly logged.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* The defaults for EventScriptTimeout and EventScriptTimeoutCount are
wrong.
* EventScriptTimeout is the total time for all enabled scripts that
are run for an event, not a single event script.
* EventScriptTimeoutCount only applies to monitor events.
* EventScriptUnhealthyOnTimeout is obsolete, so remove it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The tmpfs is mounted and unmounted by ctdbd_wrapper. Format is
CTDB_DBDIR=tmpfs:<tmpfs-options>. The only default for the tmpfs is
mode=700 - to override, specify a different value in <tmpfs-options>.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Mon Nov 9 10:58:32 CET 2015 on sn-devel-104
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Fri Nov 6 13:43:45 CET 2015 on sn-devel-104
This is deprecated. For many commands it doesn't make sense. Instead
of "ctdb ip -n all" use "ctdb ip all".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Should be an IP address not a filename.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Sat Sep 19 16:39:23 CEST 2015 on sn-devel-104
These still say /tmp/ctdb.socket, which is very out-dated. Update
with build-time location.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
In this case: ctdbd_wrapper, onnode, ctdb_diagnostics, ctdb.sudoers.
Set sensible defaults from configure options.
Update documentation to match, trying to fix up anything that has been
missed before.
The onnode unit tests need a symlink to the functions file.
The simple integration tests need to set CTDB_BASE and also
need symlinks to functions/nodes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
fixup
Signed-off-by: Martin Schwenke <martin@meltin.net>
This variable points to /etc/ by default.
This distinguishes it from the different variable from wscript, which
points to /etc/ctdb/.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Clearly identifies where all state files from scripts should go and
allows that location to be easily changed. This patch should not
change any behaviour (outside of eventscript unit tests, where a
clearer location is now used).
CTDB_VARDIR should no longer be overridden. Continue to set
CTDB_DBDIR and similar to override database location in unit tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Have wscript do path substitution.
No need to export this and CTDB_ETCDIR here, but test scripts will
still need to do so.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Format instructions for adding/deleting nodes with appropriate XML and
simplify wording.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Jose A. Rivera <jarrpa@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Always check filesystem usage for the database directories.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Sat Aug 29 20:08:48 CEST 2015 on sn-devel-104
CTDB should warn by default if too much system memory or swap is used.
The tests have also been tweaked. In particular, the filesystem-only
tests need to initialise the memory information to avoid errors where
meminfo isn't set.
Document the defaults, warning against disabling them.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
New variables CTDB_MONITOR_MEMORY_USAGE and CTDB_MONITOR_SWAP_USAGE.
Both take a pair of <warn_threshold>:<unhealthy_threshold> where each
theshold is specified as a percentage.
This adds a callout to check_thresholds() that is run when the
unhealthy threshold is reached.
Add some combination tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
CTDB_MONITOR_FREE_MEMORY and CTDB_MONITOR_FREE_MEMORY_WARN are now
percentages that specify thresholds of acceptable memory usage.
Memory/swap usage in tests also specified as percentages.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This allows both errors (i.e. unhealthy) and warnings for different
thresholds. It replaces CTDB_CHECK_FS_USE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Will put all the system monitoring in here, simplifying 00.ctdb.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
We don't expect to maintain an up-to-date copy. NFS Ganesha team
might provide patches.
Also move the Ganesha .check file
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This adds new configuration variable CTDB_RPCINFO_LOCALHOST6.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is now handled by passing the desired number of threads to the
command specified in the dump_stuck_threads variable in .check files.
Remove unused function nfs_dump_some_threads().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This isn't a straightforward move of code from 60.ganesha to the
callout. Simplifications have been made to allow better
interoperation with the new NFS checking logic.
The following configuration variables have been removed:
CTDB_GANESHA_REC_SUBDIR
Edit NFS ganesha callout to change this location
CTDB_NFS_SERVER_MODE, NFS_SERVER_MODE
Use CTDB_NFS_CALLOUT instead
CTDB_NFS_SKIP_KNFSD_ALIVE_CHECK, CTDB_SKIP_GANESHA_NFSD_CHECK
Disable the corresponding .check file instead
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This is now always enabled. If nfsd thread monitoring is not required
then make CTDB_NFS_CALLOUT point to a wrapper around
nfs-linux-kernel-callout that does not implement "monitor-post".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
For use with DisableIPFailover=1.
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed May 13 09:27:36 CEST 2015 on sn-devel-104
Required when automatic address detection can not be used. This can
be the case when running multiple ctdbd daemons/nodes on the same
physical host (usually for testing), using InfiniBand for the private
network or on Linux when sysctl net.ipv4.ip_nonlocal_bind=1.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Mon Apr 27 06:10:08 CEST 2015 on sn-devel-104
There are valid real-world use cases. Improve the documentation.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This was true for the daemon until commit
b4589b954e.
Defaulting to ERR in the ctdb CLI tool encourages logging notices at
ERR level, so default to NOTICE instead.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It is pointless having a recovery lock but not sanity checking that it
is working. Also, the logic that uses this tunable is confusing. In
some places the recovery lock is released unnecessarily because the
tunable isn't set.
Simplify the logic by assuming that if a recovery lock is specified
then it should be verified.
Update documentation that references this tunable.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
In the CTDB CLI tool source code and the documentation example.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
To support this, update printm() to replace ':' in format string with
options.machineseparator, which is a string but must contain a single
character.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There are parentheses missing that stop the default pattern from
matching commands with trailing garbage (e.g. "exportfs.orig").
A careful check of POSIX (and running GNU sed with --posix) suggests
that "\|" isn't a supported way of specifying alternation in a regular
expression. Therefore, it is clearer to switch to extended regular
expressions so that this has a chance of being portable (even though
the point is to print /proc/<pid>/stack, which only works on Linux).
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Nov 18 06:37:45 CET 2014 on sn-devel-104
Some implementations may not understand RC3164 format messages on the
UDP socket, so add support for RFC5424 message format.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This has most of the advantages of the old logd with none of the
complexity of the extra process. There are several good syslog
implementations that can listen on the UDP port.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Remove --logfile and --syslog daemon options and replace with
--logging.
Modularise and clean up logging initialisation code. The
initialisation API includes an app_name argument that is currently
unused - this will be used in extensions to the syslog backend.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Internally map them to DEBUG_ERR to limit code churn.
This reduces the unwieldy number of debug levels used by CTDB. ALERT
and CRIT aren't of much use as separate errors, since everything from
ERR up should always be logged. In future just ERR can be used.
This also improves compatibility with Samba's debug.c system priority
mapping.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
It isn't used and shouldn't be. CTDB can't make the system unusable.
Update associated test to ensure that EMERG isn't attempted. Actually
test all remaining debug levels and modernise the test a bit.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
As far as we know, nobody uses this and it just complicates the
logging subsystem.
Remove all ringbuffer code and documentation. Update the local
daemons startup code correspondingly.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Backup and restore of the cluster filesystem can upset the operation
of 60.ganesha by changing the contents of this subdirectory.
Allow this subdirectory to be configured to a subdirectory that is
ignored by backup and restore processes.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Jun 11 09:29:22 CEST 2014 on sn-devel-104
This makes sure that AllowClientDBAttach is set to 0 before detaching any
databases.
If someone enables the tunable between checking of tunable and actual
detaching of databases, then they deserve what they get. :-)
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
Commit 4ee4925d41 forgot about
CTDB_NATGW_SLAVE_ONLY so it introduces an incorrect failure when this
is set, and CTDB_NATGW_PUBLIC_IFACE or CTDB_NATGW_PUBLIC_IP is unset.
Relax the sanity check to see if CTDB_NATGW_SLAVE_ONLY is set.
Update the documentation to explicitly state that
CTDB_NATGW_PUBLIC_IFACE and CTDB_NATGW_PUBLIC_IP are optional and
unused if CTDB_NATGW_SLAVE_ONLY is set. It would be possible to
insist that CTDB_NATGW_PUBLIC_IFACE and CTDB_NATGW_PUBLIC_IFACE should
be unset in that case. However, it is more reasonable to allow
consistent configuration across nodes except with some nodes
configured slave-only.
Add tests, update infrastructure and fix a thinko in the stub's
"natgwlist" implementation.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Mon Apr 14 06:06:49 CEST 2014 on sn-devel-104
Extend CTDB_NATGW_STATIC_ROUTES so that each network can have an
optional gateway that overrides CTDB_NATGW_DEFAULT_GATEWAY.
Signed-off-by: Martin Schwenke <martin@meltin.net>
This has been implied since the command to add the route has had
errors redirected to /dev/null. If infrastucture (e.g. ADS, DNS) is
on the same network as CTDB_NATGW_PUBLIC_IP then no route is
necessary.
Signed-off-by: Martin Schwenke <martin@meltin.net>
This feature was added quite a while ago but was not enabled by
default. It is a useful feature so enable it to dump stack traces of
up to 5 stuck processes by default.
This can be disabled by setting:
CTDB_NFS_DUMP_STUCK_THREADS=0
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Tue Feb 25 04:06:45 CET 2014 on sn-devel-104
* Add stack dumps for "interesting" processes that sometimes get
stuck, so try to print stack traces for them if they appear in the
pstree output.
* Add new configuration variables CTDB_DEBUG_HUNG_SCRIPT_LOGFILE and
CTDB_DEBUG_HUNG_SCRIPT_STACKPAT. These are primarily for testing
but the latter may be useful for live debugging.
* Load CTDB configuration so that above configuration variables can be
set/changed without restarting ctdbd.
Add a test that tries to ensure that all of this is working.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Also:
* More <refentryinfo> above <refmeta> to make the XML valid.
* Describe DB argument in introduction and use it for database
commands.
* Remove unnecessary format="linespecific" from <screen> tags, since
it will not be allowed in DocBook 5.0.
* Sort the items in "INTERNAL COMMANDS".
* Update/simplify some command descriptions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This can be useful for piping data to onnode in certain circumstances.
There are now also enough command-line options that they should
definitely be alphabetically ordered.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Michael Adam <obnox@samba.org>
This includes new manpages for ctdb.7, ctdb.conf.5 and ctdb-tunables.7.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 15b5c6c00c248bc1a8364a6da103296a55d7bfb6)
Use sequence numbers to do recovery for persistent databases instead of
RSNs. This fixes the problem of registry corruption during recovery.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 56486d1c01cc8ad0e4b8cee7a22429e72e50f03d)
This simplifies building since we don't use any of the Samba
extensions.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 57aa2dffea60abd73a95233f8b761cc676adebb6)
This will allows eventscripts to send information about multiple tcp
connections to a single "ctdb killtcp" command, saving the overhead of
setting up a client connection per tcp connection.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit af5aa369c266430fe912df0c26116b68bac3572e)
The code for deadlock detection and killing smbd process causing deadlock
has been removed and replaced with external debug script.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 2211cd94bea266547d3e6f167d3160a6b23bec88)
When the recovery master notices a node in recovery mode it starts the
recovery process, it doesn't restart it.
Update documentation to match.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 298c4d2c3b4ea3d900c91f5a0a5aca2952a13d61)
The example notification script is now much more useful.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 4ba7c73eeab98296c9168e0b0fed1f6bb9f32733)
This adds more serialisation to the startup, ensuring that the
"startup" event runs after everything to do with the first recovery
(including the "recovered" event).
Given that it now takes longer to get to the "startup" state, the
initscript needs to wait until ctdbd gets to "first_recovery".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit ed6814ff0a59ddbb1c1b3128b505380f60d7aeb7)
If one or more run states are specified then "ctdb runstate" succeeds
only if ctdbd is in one of those run states.
At the moment, if the "setup" event fails then the initscript succeeds
but ctdbd exits almost immediately. This behaviour isn't very
friendly.
The initscript now waits until ctdbd is in "startup" or "running" run
state via the use of "ctdb runstate startup running", meaning that ctdbd
has successfully passed the "setup" event.
The "setup" event code in 00.ctdb now waits until ctdbd is in the
"setup" run state before proceeding via the use of "ctdb runstate setup".
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 4a2effcc455be67ff4a779a59ca81ba584312cd6)
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit bf20c3ab090f75f59097b36186347cedb1c445d4)
This really needs to be per-node. The rename is because nodes with
this tunable switched on should drop IPs if they become unhealthy (or
disabled in some other way).
* Add new flag NODE_FLAGS_NOIPHOST, only used in recovery daemon.
* Enhance set_ipflags_internal() and set_ipflags() to setup
NODE_FLAGS_NOIPHOST depending on setting of NoIPHostOnAllDisabled
and/or whether nodes are disabled/inactive.
* Replace can_node_servce_ip() with functions can_node_host_ip() and
can_node_takeover_ip(). These functions are the only ones that need
to look at NODE_FLAGS_NOIPTAKEOVER and NODE_FLAGS_NOIPHOST. They
can make the decision without looking at any other flags due to
previous setup.
* Remove explicit flag checking in IP allocation functions (including
unassign_unsuitable_ips()) and just call can_node_host_ip() and
can_node_takeover_ip() as appropriate.
* Update test code to handle CTDB_SET_NoIPHostOnAllDisabled.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 1308a51f73f2e29ba4dbebb6111d9309a89732cc)
Samba versions 3.6.x and older do not set the database priority.
This can cause deadlock between Samba and CTDB since the locking order
of database will be different. A hack was added for automatic promotion
of priority for specific databases to avoid deadlock. This code should
not be invoked with Samba version 4.x which correctly specifies the
priority for each database.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Michael Adam <obnox@samba.org>
(This used to be ctdb commit 4a9e96ad3d8fc46da1cd44cd82309c1b54301eb7)
Generated docs will be bundled with release tarballs. No need to keep
them in git. This avoids the need to commit the generated doc version
if source xml is modified.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit f3888712298f1de7cc7eb51f50c22080fa64e3c0)
This can then be used to build manpages/html when creating tarball.
Do not build docs during a regular build, but only for install.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 3274cffe2052953b34141a82de6053b747532a88)
This introduces a consistent API for handling locks on single record, complete
db or all dbs. The locks are taken out in a child process. In cases of timeout,
find the processes that currently hold the lock and log.
Callback functions for locking requests take locked boolean to indicate
whether the lock was successfully obtained or not.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
(This used to be ctdb commit 1af99cf0de9919dd89af1feab6d1bd18b95d82ff)
Stops the behaviour where unhealthy nodes can host IPs when there are
no healthy nodes. Set this to 1 when an immediate complete outage is
preferred when all nodes are unhealthy. The alternative
(i.e. default) can lead to undefined behaviour when the shared
filesystem is unavailable.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit a555940fb5c914b7581667a05153256ad7d17774)
At the moment routes from 11.routing can fail to be added because they
conflict with the default route added by 11.natgw.
NAT gateway is meant to be a last resort, so routes from 11.routing
should override it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
(This used to be ctdb commit 624f4677e99ed1710a0ace76201150349b1a0335)
We dont strictly need to force clients to use CTDB_FETCH_WITH_HEADER instead of CTDB_FETCH when they ask for readonly records.
Have ctdbd internally remap this internally to FETCH_WITH_HEADER and map the reply back to CTDB_FETCH_FUNC or CTDB_FETCH_WITH_HEADER_FUNC based on what the client initially asked for.
This removes the need for the client to know about the CTDB_FETCH_WITH_HEADER_FUNC function and simplifies the client code.
Clients that do not care what the header after the request is can just continue using the old CTDB_FETCH_FUNC call and ctdbd will do all the difficult stuff.
(This used to be ctdb commit 444a7bac4e9a854b06c1ad4cb36c2b58a72001fa)
Signed-off-by: Luk Claes <luk@debian.org>
Signed-off-by: Michael Adam <obnox@samba.org>
(This used to be ctdb commit afd96d5990815019b1f9ddc8b78a05f86eca0421)
Signed-off-by: Luk Claes <luk@debian.org>
Signed-off-by: Michael Adam <obnox@samba.org>
(This used to be ctdb commit 39f595cad5321c64e2b1e72fe7b4bbb720f4b906)
s/poerwoff/poweroff/
Bug 8124
Signed-off-by: Luk Claes <luk@debian.org>
Signed-off-by: Michael Adam <obnox@samba.org>
(This used to be ctdb commit a6d2f1bd552dba33640acb7a0b8110534debd4ce)
* continous -> continuous
* activete -> activate
(thanks to lintian)
See https://bugzilla.samba.org/show_bug.cgi?id=6935
Signed-off-by: Michael Adam <obnox@samba.org>
(This used to be ctdb commit fb6987c2f747d6dbf9bb3899a480124d1c242a90)
network connectivity outside of the cluster to still be able to
participate in a natgw group.
These nodes can not become natgw master since they lack external network
connectivity.
These nodes are configured just the same way as for any other node with
NATGW, with the following two exceptions :
* we do NOT set CTDB_NATGW_PUBLIC_IFACE at all on these nodes.
since these ndoes lack external network we should not check the interface
for link.
* we must set CTDB_NATGW_SLAVE_ONLY=yes to flag that this is a node that
can not become natgw master.
(This used to be ctdb commit ab7b00a37e55beffc074be95b55d8a5c7cb9eef2)
