IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Move filtering of entries, in particular symlinks, fully into
smbd_dirptr_get_entry(). Before, this was hidden in magic code inside
openat_pathref_fsp() and the mode_fn()s. Changing anything file open
code led to changes in very distant code paths because of unforeseen
consequences to directory listing. This change centralizes the
decision what directory entries to show into
smbd_dirptr_get_entry(). It uses openat_pathref_fsp_nosymlink()
without any symlink magic. It might need some tweaking when we also
want to show other special files, but this will hopefully be easier.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
No caller uses this anymore. The only downside here now is that we
always go directly to mask_match instead of a trying strcasecmp_m
first. I very much doubt this makes a measurable difference because
this would have been called for non-wildcard
readdirs (a.k.a. qpathinfo), and there we do this only once per
complete directory read. Also I don't believe mask_match() is
measurably more expensive than strcasecmp_m() for the usually short
filenames we're looking at here.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Jun 16 17:07:46 UTC 2023 on atb-devel-224
I don't think this is an effective optimization at all anymore. It was
intended to speed up non-wildcard readdirs after we found the correct
entry. Nowadays we do the non-wildcard readdirs by a direct fstatat,
and after we successfully found the entry dptr_ReadDirName()
immediately returns without any further action. So my very strong
guess is that this never really kicked in anymore. Not using this flag
can't be *that* bad, smb2 never used it.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
No caller does anything with the smb_fname upon overflow, so we might
as well do an early return.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Mar 31 21:21:57 UTC 2023 on atb-devel-224
Remove knownfail for posix path handling of case/reserved char
Signed-off-by: David Mulder <dmulder@samba.org>
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Ensure we strip from ucs_flags before calling filename_convert_dirfsp().
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
check_path_syntax_smb2() is now a simple wrapper around check_path_syntax().
Leave it alone for now to keep things separate when we add SMB3+POSIX parsing.
check_path_syntax_smb2_msdfs() is now no longer used.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
In smb2, smb1req->flags2 now never uses FLAGS2_DFS_PATHNAMES,
ucf_flags never has UCF_DFS_PATHNAME, and all calls to check_path_syntax_smb2()
pass "false" in this is_dfs parameter.
Remove all knownfails for smb2.SMB2-DFS* tests.
Now I can clean up check_path_syntax_smb2() and add
an assertion into filename_convert_dirfsp_nosymlink() that
UCF_DFS_PATHNAME is *NEVER* set in the ucf_flags for an
SMB2 connection.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
It now looks like all other SMB2 path processing and
we can proceed to strip the DFS prefixes from SMB2 pathnames
before further processing.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
They're an SMB1 thing, not an SMB2 thing. It will always be (and always was) zero.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
We're going to change the SMB2 path handling for DFS and I
really don't want to try and mix these changes into the
existing smb_file_link_information() code.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
That's an SMB1 thing. It will always be (and always was) zero.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Even const arrays of const strings need to be relocated at startup time.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is a bit more involved as readdir_attr_data needs to be looked
at. The meaning of this if-statements should be the same though,
readdir_attr_data can only be non-NULL if we don't have a reparse
point around. See the beginning of smbd_marshall_dir_entry().
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Wed Jan 4 09:48:37 UTC 2023 on sn-devel-184
smbd_do_qfilepathinfo() does not use the lock data anymore, we can
pass NULL/0 now.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Most of this is direct cut&paste without reformatting.
Don't pass SMB_SET_POSIX_LOCK through smbd_do_setfilepathinfo(),
directly handle it in call_trans2setfileinfo() where we know we have a
fsp.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Most of this is direct cut&paste without reformatting.
Don't pass SMB_SET_FILE_UNIX_HLINK through smbd_do_setfilepathinfo(),
directly handle it in call_trans2setpathinfo() where we know we have a
path.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Most of this is direct cut&paste without reformatting.
Don't pass SMB_SET_FILE_UNIX_LINK through smbd_do_setfilepathinfo(),
directly handle it in call_trans2setpathinfo() where we know we have a
path.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Most of this is direct cut&paste without reformatting.
Don't pass SMB_POSIX_PATH_UNLINK through smbd_do_setfilepathinfo(),
directly handle it in call_trans2setpathinfo() where we know we have a
path.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Most of this is direct cut&paste without reformatting.
Don't pass SMB_POSIX_PATH_OPEN through smbd_do_setfilepathinfo(),
directly handle it in call_trans2setpathinfo() where we know we have a
path.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
