IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
In nt_affects_chgrp() check for domadmins *group*, not user. This didn't
trigger an error as nt_affects_chgrp() isn't actually called, see next
commit.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=7933
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Don't give ownership to user "force_user" as user "$USERNAME", this
would fail with NT_STATUS_INVALID_OWNER, instead just take ownership as
user "force_user". Adding a corresponding ACE for "force_user" with FULL
rights ensures this works.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=7933
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Ensure fake_snap.pl can be run in taint mode (-T), by sanitizing paths
and the PATH env. This fixes the following samba3.rpc.fsrvp selftest
failures:
Insecure dependency in mkdir while running setgid at (eval 2) line 4.
snap create failed: NT_STATUS_UNSUCCESSFUL
snap create failed for shadow copy of /home/ddiss/isms/samba/st/nt4_dc/share
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12988
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Aug 29 04:54:51 CEST 2017 on sn-devel-144
spoolss_SetPrinter fails because of the error produced by modprinter.pl.
Perl error:
Insecure dependency in open while running setgid at modprinter.pl line 76.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12950
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12975
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Andrew Bartlet <abartlet@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Wed Aug 23 17:05:48 CEST 2017 on sn-devel-144
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Tue Jul 25 13:17:13 CEST 2017 on sn-devel-144
This should fix flakey autobuild.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12914
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jul 19 11:59:52 CEST 2017 on sn-devel-144
Tested over SMB1 and SMB2.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12899
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Richard Sharpe <realrichardsharpe@gmail.com>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Jul 18 14:05:18 CEST 2017 on sn-devel-144
As a follow up to eedebe2ef1 ("docs-xml: Sort input file list"), this
change enables reproducible builds, without the added complexity of
https://lists.samba.org/archive/samba-technical/2017-June/121302.html
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12906
Signed-off-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Fri Jul 14 18:48:08 CEST 2017 on sn-devel-144
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12885
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Sat Jul 8 00:33:51 CEST 2017 on sn-devel-144
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Alexander Bokovoy <ab@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Jul 7 13:38:24 CEST 2017 on sn-devel-144
This removes important entries winbindd created during startup!
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12868
Pair-Programmed-With: Ralph Boehme <slow@samba.org>
Signed-off-by: Andreas Schneider <asn@samba.org>
Signed-off-by: Ralph Boehme <slow@samba.org>
This reverts commit 4eb29ce326.
This will be passed by the caller in a following commit.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This will make it possible to test with -mNT1 as well as -mSMB3
in a following patch.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
On interactive sessions we print the following instead now:
Try "help" do get a list of possible commands.
smb: >
The reason for this is that we don't get these information via SMB2
and the we only get the domain name via some layering violations
from the NTLMSSP state.
It's better to remove this consitently for all SMB and auth
protocol combinations.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
The test_smbclient_tarmode.pl test operates on $LOCAL_PATH by default
and removes everything. So it deletes all precreated files and
directories which the setup_fileserver() function initially set up.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12867
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
We need to use -mNT1 or -mSMB3 at the end of the command line in order
to overwrite possible '-m' arguments in $ADDARGS.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The getfacl command is SMB1 only and will most likely never
be part the SMB3 unix extensions.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12849
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Tue Jun 20 14:48:33 CEST 2017 on sn-devel-144
When assigning value to 'failed', no spaces should be around '=' sign.
Signed-off-by: Alexander Bokovoy <ab@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Apr 19 02:53:25 CEST 2017 on sn-devel-144
Add a test that fetches an ACL whose size is larger than 4K.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12737
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12739
Signed-off-by: Noel Power <noel.power@suse.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Apr 13 15:20:04 CEST 2017 on sn-devel-144
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Apr 13 02:44:38 CEST 2017 on sn-devel-144
The test fails on openSUSE Tumbleweed with:
NT_STATUS_FILE_IS_A_DIRECTORY opening remote file \foo\bar\testfile
This cleans up the code to create a directory 'test' which can be
completely removed so nothing will stay behind. It also makes sure that
all parent directories are created and the files have some content.
https://bugzilla.samba.org/show_bug.cgi?id=12721
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Apr 8 12:29:19 CEST 2017 on sn-devel-144
This test passes even without the fix, as in sids2xids we use the
lookupnames just to determine the mapping domain, using the default
idmap domain as fallback if that fails.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12727
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add tests for regular access.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12721
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Tue Mar 28 17:05:27 CEST 2017 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12721
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
Autobuild-User(master): Uri Simchoni <uri@samba.org>
Autobuild-Date(master): Tue Mar 28 07:00:46 CEST 2017 on sn-devel-144
This ensures that the RODC can authenticatate users over wbinfo, normal services and SamLogon
including in particular the important need-to-be-forwarded case
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Test various combinations of having encryption globally turned off and
enabled (desired/required) on a share, with SMB1 UNIX Extensions and SMB3.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12520
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12384
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Uri Simchoni <uri@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Fri Oct 21 04:48:52 CEST 2016 on sn-devel-144
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Oct 7 15:52:36 CEST 2016 on sn-devel-144
Add tests which verify that a snapshot file is readable
if and only if it its metadata can be retrieved. Also
verify (in most tests) that file is retrieved from the
correct snapshot.
Together with the existing test for number of previous
versions we can stat, this test checks that we can read
those files, and also that we cannot break out of a snapshot
if wide links are not allowed.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12172
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This will allow reading them and verifying we got the right version
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12172
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add a share parameter to individual disk-free tests. This will
allow running tests on shares other than dfq share.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12145
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add test case for the newly addded option shadow:snapprefix
and shadow:delimiter
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Added test cases which will filter snapshot names based
on shadow:format option in smb.conf
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
We already have 'as anon', having an indication for each case makes it
easier to mark some as knownfail.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Since commit 0f6d51f34b libnet_join
automatically adds netbios aliases as SPNs to the machine account.
This commit adds a simple test with smbclient -k against the aliases.
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Sun Jun 19 19:07:46 CEST 2016 on sn-devel-144
When we transitioned from autotools to waf we dropped installing the
findsmb script. However we create and install the manpage for it so
install it in the system again.
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Guenther Deschner <gd@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Jun 9 19:10:15 CEST 2016 on sn-devel-144
Remove a test for special handling of EDQUOT errno when determining
user/group quota - If the backend has obtained the quota settings it
has to return 0 and not error.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Add a test for situation where quota accounting is enabled
but quota enforcement is disabled (disk-free should not take
quota into account)
Add a test for situation where overall quota status reporting
(whether or not it's enforcing) is not supported - as with NFS.
In that case it must be assumed that if quota is configured, then
it is also enforced (as with NFS).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11937
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We test all combinations of NT1 with and without spnego and SMB3
for user, anonymous and guest authentication.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11849
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Günther Deschner <gd@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu Apr 28 20:16:45 CEST 2016 on sn-devel-144
BUG: https://bugzilla.samba.org/show_bug.cgi?id=8093
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Uri Simchoni <uri@samba.org>
Autobuild-Date(master): Wed Mar 2 23:51:56 CET 2016 on sn-devel-144
Signed-off-by: Christian Ambach <ambi@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Christian Ambach <ambi@samba.org>
Autobuild-Date(master): Fri Feb 26 14:40:55 CET 2016 on sn-devel-144
Remove semicolon; without this change the test could not detect a
failure of removing the ACL.
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
The deprecation of the Debian realpath caused issues on one of the
machines we attempted to build on.
Signed-off-by: Adrian Cochrane <adrianc@catalyst.net.nz>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Uri Simchoni <uri@samba.org>
Autobuild-User(master): Garming Sam <garming@samba.org>
Autobuild-Date(master): Fri Feb 19 04:43:50 CET 2016 on sn-devel-144
Test covers commit
cf0934caf2
BUG: https://bugzilla.samba.org/show_bug.cgi?id=9878
RH BUG: https://bugzilla.redhat.com/show_bug.cgi?id=1077651
How to test:
$ make -j test TESTS="samba3.blackbox.smbclient.forceuser_validusers"
RESULD: Should PASS
$ git revert cf0934caf2
$ make -j test TESTS="samba3.blackbox.smbclient.forceuser_validusers"
RESULT: Should FAIL
Signed-off-by: Robin Hack <rhack@redhat.com>
Reviewed-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Uri Simchoni <uri@samba.org>
Autobuild-Date(master): Thu Feb 4 03:44:42 CET 2016 on sn-devel-144
Eliminate backslashes from smbcquotas output so that we
don't have to deal with them correctly when parsing the output.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11697
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
These tests use the vfs_fake_dfq module to simulate some
relations between the quota status and disk-free status.
The tests will become meaningful when we take the code that
does those calculations out of the VFS layer - the tests will
then exercise the server code.
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Add a blackbox test suite for vfs_shadow_copy2, testing
parameters mountpoint, basedir, snapdir, snapdirseverywhere,
and testing correct wide-link processing.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11580
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Wed Jan 13 17:11:38 CET 2016 on sn-devel-144
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Jan 7 07:41:22 CET 2016 on sn-devel-144
Add tests that cover disk usage printing by smbclient, as well
as passing directory info to the "dfree command" script.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11662
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jan 6 03:58:59 CET 2016 on sn-devel-144
Add a test for connecting to a share with a "force user" whos
primary unix gid maps to a well-known alias.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11608
Signed-off-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Nov 19 23:20:36 CET 2015 on sn-devel-104
Regression test for:
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11522
Remember to remove the ARCHIVE attribute from the toplevel
share when done (can only be done over SMB2+).
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Sep 18 11:00:44 CEST 2015 on sn-devel-104
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11320
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Jul 30 00:36:14 CEST 2015 on sn-devel-104
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Jul 17 22:09:34 CEST 2015 on sn-devel-104
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Tue Jul 14 16:10:44 CEST 2015 on sn-devel-104
Add a test for the sharesec command to ensure that it works, and to also
verify that the output does not change.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11324
Signed-off-by: Christof Schmitt <cs@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Bug 11249 - Mangled names do not work with acl_xattr
BUG: https://bugzilla.samba.org/show_bug.cgi?id=11249
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Tue May 5 16:37:18 CEST 2015 on sn-devel-104
This does not join the DC itself, so as not to pertrub the test
environment mid-run, but does confirm that the join works and the
password can be changed.
Pair-programmed-with: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Dec 11 21:40:27 CET 2014 on sn-devel-104
On FreeBSD, "wc -l" returns whitespace. Cope with that.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Nov 28 10:24:06 CET 2014 on sn-devel-104
This improved code simply cleans up the memory as soon as possible,
rather than using memcmp(). Otherwise, we segfault if
krb5_kt_start_seq_get fails, as it can set the fd element in the
handle to -1.
Change-Id: Ib4821ef944a7e12cd8a891ae07dbfc0567c65495
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Pair-programmed-with: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Nov 27 07:38:02 CET 2014 on sn-devel-104
In particular, this tests that ID_TYPE_BOTH is cached correctly.
Change-Id: I2475f22d3f4506c93b15d82b0d337d3729bbbd4c
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Garming Sam <garming@samba.org>
Autobuild-Date(master): Thu Nov 27 05:16:53 CET 2014 on sn-devel-104
Change-Id: I1a0a8f62522a6eb64d39bee48f4f71403d7c343a
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
(updated by abartlet to fix knownfail changes due to AD DC winbindd
use in master)
Change-Id: Iec41fbfc0f501888fd16323bf78da61aa549b4de
Signed-off-by: Garming Sam <garming@catalyst.net.nz> Reviewed-by:
Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Kamen Mazdrashki <kamenim@samba.org>
Autobuild-User(master): Kamen Mazdrashki <kamenim@samba.org>
Autobuild-Date(master): Tue Jul 15 15:59:49 CEST 2014 on sn-devel-104
This avoids a pile of shell-script escape pain, and fixes some tests.
Andrew Bartlett
Change-Id: Ie1d0e32ab484a5b0ddbc4073831fe6de27e38e92
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Change-Id: Ic2e06e448fce1d91422b711abf663b9253009a53
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Autobuild-User(master): David Disseldorp <ddiss@samba.org>
Autobuild-Date(master): Wed Apr 2 13:07:24 CEST 2014 on sn-devel-104
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Pair-programmed-with: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Garming Sam <garming@catalyst.net.nz>
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
The script simulates snapshots by simply copying file data from the base
path to a snapshot path located under .snapshots/@GMT-%Y.%m.%d-%H.%M.%S/
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
The host, share and localpath arguments should not take default values.
Check that these required arguments are specified.
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
Autobuild-User(master): Jim McDonough <jmcd@samba.org>
Autobuild-Date(master): Tue Nov 5 16:40:20 CET 2013 on sn-devel-104
[ddiss@samba.org: split from clitar implementation commit]
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
* reset_remote() now removes the whole share content
* verbose flag to control stdout of each test
* extraction with regex test
Signed-off-by: Aurélien Aptel <aurelien.aptel@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
[ddiss@samba.org: split from clitar implementation commit]
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
[ddiss@samba.org: split from clitar implementation commit]
Signed-off-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
While changing my setup, I discovered that for some unknown reasons
samba (serv/client) doesn't print any attributes for normal files.
Signed-off-by: Aurélien Aptel <aurelien.aptel@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
* add some test for wildcard pattern and r switch, when possible (-r
is very buggy)
* change default DIR to "tar_test_dir"
* add tests for attributes (nohidden, nosystem which are undocumented)
Signed-off-by: Aurélien Aptel <aurelien.aptel@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
* File::list() now takes an absolute path
* check_remote() now takes the dir to check
* added an optional File destructor
* added cleanpath() to remove unecessary slashes
* File::new_remote() can take an absolute path
* File->{dir} is now absolute from the localpath
Signed-off-by: Aurélien Aptel <aurelien.aptel@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
Add test for extracting from a file list.
Signed-off-by: Aurélien Aptel <aurelien.aptel@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
* add test_creation_list()
* add parameter to File::new_local() to provide file content
Signed-off-by: Aurélien Aptel <aurelien.aptel@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
* add test for xI and xX
* fix bug in check_remote(): print filename instead of ref
* replace hash by list in test_extraction_normal()
Signed-off-by: Aurélien Aptel <aurelien.aptel@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
