IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
- enable cli_RNetSharEnum
- fix password handling in sesssetup for NT1 protocol
- handle partial reads and writes in cli_{read,write}
- added cli_getattrE
- modify cli_qpathinfo() to swap byte order for win95 servers
- handle temporary errors from FINDFIRST/FINDNEXT from win95 servers,
when we get a error we sleep for a bit and retry
- return approx unix errno from cli_error(). Need to add a lot more
cases to this.
(This used to be commit 715a6631c7)
- added srvsvc client files
clientgen.c :
- replaced cli_error(cli, int *cls, int *err) with
cli_error(cli, uint8 cls, uint32 *err). this version detects
32 bit status messages. the DOS error "MORE_DATA", the
equivalent of the 32 bit *warning* 0x8000 0005
(STATUS_BUFFER_OVERFLOW), was being processed as an error,
terminating the cli_receive_trans() call.
cli_pipe.c :
- replaced calls that had been incorrectly modified from
32 bit warnings (0x8000 0005 - STATUS_BUFFER_OVERFLOW)
to 8 bit DOS errors (0x01 0xEA - MORE_DATA).
the use of the old version of cli_error (DOS only)
instead of the new one (DOS and 32 bit) caused the
dce/rpc client code to fail.
- replaced 2 space indentation with tab indentation in all functions.
cli_srvsvc.c :
cmd_srvsvc.c :
- added these files back in, fixing them up to use jeremy's
modified versions of the dce/rpc client functions.
parse_srv.c :
- added back in some "unused" functions required by dce/rpc
client-side code. it would be helpful if all such "unused"
functions could be added back in.
rpcclient.c :
- added "session", "file", "share", "connection" enumeration
functions back in. these are equivalent to nt's "NetXXXXXEnum"
Win32 (MSDN) functions.
- added "srvinfo" function back in. this is equivalent to
nt's NetServerGetInfo Win32 (MSDN) function.
(This used to be commit bcf39ffdcc)
create_new_hashes didn't zero the buffer for the md4hash: nt_lm_owf_gen
did, because jeremy sorted this out a couple of days ago. call
nt_lm_owf_gen instead.
- call SMBOWFencrypt from SMBencrypt and SMBNTencrypt.
- added #ifdef DEBUG_PASSWORD debug password calls.
(This used to be commit a4e7cc3e46)
param/loadparm.c:
smbd/oplock.c: Allow kernel oplocks to be turned off in the smb.conf file.
smbd/server.c: Move init_structs() to after the smb.conf file is loaded - preparation
for making a "max open files" parameter.
Jeremy.
(This used to be commit 6a261517a0)
uid_t, gid_t and vuid. Added sys_getgroups() to get
around the int * return problem. Set correct datatypes
for all uid, gid and vuid variables.
Jeremy.
(This used to be commit e570db46fc)
Changes to get Samba to compile cleanly with the IRIX compiler
with the options : -fullwarn -woff 1209,1174 (the -woff options
are to turn off warnings about unused function parameters and
controlling loop expressions being constants).
Split prototype generation as we hit a limit in IRIX nawk.
Removed "." code in smbd/filename.c (yet again :-).
Jeremy.
(This used to be commit e0567433bd)
dummy.in files are no longer needed, and new directories will be taken
care of automatically, at configure (or config.status --recheck) time
(This used to be commit 237a8e5fe6)
prompted by the interpret_security() dead code that Jean-Francois
pointed out I added a make target "finddead" that finds potentially
dead (ie. unused) code. It spat out 304 function names ...
I went through these are deleted many of them, making others static
(finddead also reports functions that are used only in the local
file).
in doing this I have almost certainly deleted some useful code. I may
have even prevented compilation with some compile options. I
apologise. I decided it was better to get rid of this code now and add
back the one or two functions that are needed than to keep all this
baggage.
So, if I have done a bit too much "destroying" then let me know. Keep
the swearing to a minimum :)
One bit I didn't do is the ubibt code. Chris, can you look at that?
Heaps of unused functions there. Can they be made static?
(This used to be commit 2204475c87)
correctly. Added new parameter "stat cache size" - set to 50 by default.
I now declare the statcache code officially "open" for business :-).
It gets a hit rate of 97% with a NetBench run and seems to make
using a case insensitive run as efficient as a case sensitive run.
Also tidied up our sys_select usage - added a maxfd parameter and
also added an implementation of select in terms of poll(), for systems
where poll() is much faster. This is disabled by default.
Jeremy.
(This used to be commit 779b924ec1)
the chain pointer is now stored as a static and is set whenever a
handle is created or extracted. This also makes the code less error
prone.
(This used to be commit 068a862982)
Connections[] is now a local array in server.c
I might have broken something with this change. In particular the
oplock code is suspect and some .dll files aren't being oplocked when
I expected them to be. I'll look at it after I've got some sleep.
(This used to be commit c7ee025ead)
through and changed some DEBUG() calls to DEBUGADD() to combine output
under a single timestamp. There were too many timestamps.
Note that Jeremy has told me that he's working on adding a config parameter
to turn timestamps off. Cool.
Chris -)-----
(This used to be commit 247dbc9a24)
timestamps from several DEBUG messages. The timestamps are redundant now
that DEBUG() provides them automatically.
There are still a few more files to do, but I've got to get home for dinner.
Chris -)-----
(This used to be commit 60286cceca)
make_nmb_name() function. Database lookups (eg. gdbm) will often use
byte-by-byte comparisons, so it is important that the case and padding
are correct.
Chris -)-----
(This used to be commit d64ca4250f)
nmbd_become_lmb.c: Add 'force_new_election' parameter to some functions.
This allows the start of the election to be done *after*
the demotion from local master browser is done.
Also changed code so release of 1d name is done
immediately to allow other local master to gain it.
nmbd_elections.c: Ensured no elections are run until we have registered
the WORKGROUP<1e> name that we must listen on to participate
in elections.
nmbd_incomingdgrams.c: Use force_new_election code.
nmbd_namelistdb.c: Make update_name_in_namelist static.
nmbd_subnetdb.c: Fix bug in comparison function. We cannot use memcmp
as structure packing may make this fail.
nmbd_packets.c: Ensure that we only send one release packet when
sending a broadcast packet.
nmbd_workgroupdb.c: Ensure we put the correct value in the ElectionCriterion field.
nmblib.c: Ensure make_nmb_name zero's the struct nmb_name.
Jeremy.
(This used to be commit 1fcb094ba0)
want them to have the copyright.
Added a new DOSERR response code that Win95 returns, unimp, unimplemented.
Added code to ignore errors on setting remote time, as Win 95 does not like
the time being changed on a directory. Win NT and Samba are OK at this.
This is the next to last clean-ups here. Next is to properly handle restore
times on directories (except for Win95--see above).
Now have Jay's changes in and have fixed a bug reported by Tim Lee.
(This used to be commit dc9436bae4)
clitar.c: Added 'Samba style' comments before string_create_s().
loadparm.c: Fixed missing comma in SSL code.
util.c: Removed string_create_s(). Currently it's only called from
clitar.c and having it here as well as a static in clitar
causes the compile to break (Richard, please decide where
you want this function).
lib/rpc/parse/parse_net.c: Fix from <anders.blomdell@control.lth.se>
to stop coredump on missing parameter.
Jeremy.
(This used to be commit d23b443225)
This patch may not yet compile with -DUSE_SSL enabled, further
Makefile changes may be needed. But it was important to get
this code in place before I go off to USENIX.
Jeremy.
(This used to be commit 31e768369f)
server.c: Added MACHINE.SID file generation - use lp_domain_sid() be default.
smbpass.c: Exposed do_file_lock() as I now use it in server.c
Jeremy.
(This used to be commit 5bf17840ac)
It removed all ocurrences of the following functions :
sprintf
strcpy
strcat
The replacements are slprintf, safe_strcpy and safe_strcat.
It should not be possible to use code in Samba that uses
sprintf, strcpy or strcat, only the safe_equivalents.
Once Andrew has fixed the slprintf implementation then
this code will be moved back to the 1.9.18 code stream.
Jeremy.
(This used to be commit 2d77445400)
everywhere. I've implemented slprintf() as a bounds checked sprintf()
using mprotect() and a non-writeable page.
This should prevent any sprintf based security holes.
(This used to be commit ee09e9dadb)
password.c: Stopped cli_nt_logout call (we don't have it correct yet).
Added Luke object-orientation fix :-).
smb.h: Added clnt_name_slash to cli_state.
lib/rpc/client/cli_login.c: Changed global_myname to clnt_name_slash where needed.
lib/rpc/client/cli_netlogon.c: Fixed debug messages, don't check creds on error.
lib/rpc/client/cli_pipe.c: Fixed debug messages, Added Luke object-orientation fix.
lib/rpc/parse/parse_misc.c: Fixed STRING2 linearization bug that was adding 1.
Jeremy.
(This used to be commit c6c22df201)
WARNING - so far this has only been tested against a Samba PDC
(still waiting for IS to add me the machine accounts :-).
Still missing is the code in smbpasswd that will add a machine
account password and change it on the domain controller, but
this is not hard, and I will check it in soon.
Jeremy.
(This used to be commit 17b94a7084)
It is changing the global variables "myname" and "myworkgroup"
to "global_myname" and "global_myworkgroup" respectively.
This is to make it very explicit when we are messing
with a global (don't ask - it makes the domain client
code much clearer :-).
Jeremy.
(This used to be commit 866406bfe3)
clientgen.c: Added nt_error as an entry in the struct client_state.
password.c: Open the netlogon pipe.
smb.h: Added nt_error as an entry in the struct client_state.
lib/rpc/parse/parse_net.c: Added comments on net logon.
lib/rpc/server/srv_netlog.c: Added comments on net logon.
Jeremy.
(This used to be commit 899a9f0dce)
password.c: Changed global cli -> pw_cli, removed strtok (bad strtok, bad :-)
use in security=server, started to extend security=domain code.
smbpasswd.c: Removed rap error code functions.
Jeremy.
(This used to be commit 0f00b8fce1)
clientgen.c: Changed to fill change password buffer with random stuff.
password.c: Changed to get challenge from genrand.c
server.c: Added #ifdef around O_SYNC.
version.h: Changed to 1.9.19prealpha.
genrand.c:
New code to generate (hopefully) good random numbers for
use in crypto challenges/session keys etc.
PLEASE REVIEW THIS CODE AND SUGGEST IMPROVEMENTS !!!!!!
Jeremy.
(This used to be commit 608e985463)
regularized parameter syntax:
setup, setup_count, max_setup_count,
params, params_count, max_params_count,
data, data_count, max_data_count,
(and if a reply is needed)
*reply_params, *reply_data_len
*reply_data, *reply_data_len
This allows the pointers and the lengths
that relate to these pointers to be next
to each other in the parameter list. This
makes seeing what you are passing to these
functions much easier to see.
Getting ready for adding the lib/rpc/client
functions needed to do security=domain.
torture.c: Fixed it so it uses / rather than \\
internally for the //machine/share syntax.
Jeremy.
(This used to be commit 38350ea8b9)
smbdes.c: Added cred_hash3.
smbpasswd.c: Fixes for adding a machine account (needs more work).
lib/rpc/server/srv_netlog.c: Turn on the machine password changing
code by default (calls cred_hash3).
Jeremy.
(This used to be commit 50aa513b96)
