IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
we shouldn't accept bad multi-byte strings, it just hides problems
Autobuild-User: Andrew Tridgell <tridge@samba.org>
Autobuild-Date: Thu Mar 24 01:47:26 CET 2011 on sn-devel-104
This changes auth_serversupplied_info into the IDL-defined struct
auth_user_info_dc. This then in turn contains a struct
auth_user_info, which is the only part of the structure that is
mainted into the struct session_info.
The idea here is to avoid keeping the incomplete results of the
authentication (such as session keys, lists of SID memberships etc) in
a namespace where it may be confused for the finalised results.
Andrew Barltett
The new waf-based build system now has all the same functionality, and
the old build system has been broken for quite some time.
Autobuild-User: Jelmer Vernooij <jelmer@samba.org>
Autobuild-Date: Sun Oct 31 02:01:44 UTC 2010 on sn-devel-104
the mixture of async and sync code in gensec makes a EOF on a socket
during a session setup cause a crash. The simplest solution is to
stop processing events on the socket until the session setup is
complete.
This also changes the calling convention slightly - we should always
allocate this with talloc_zero() to allow some elements to be
optional. Some elements may only make sense in Samba3, which I hope
will use this common structure.
Andrew Bartlett
this converts all callers that use the Samba4 loadparm lp_ calling
convention to use the lpcfg_ prefix.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
This allows us to control what groups should be added in what use
cases, and in particular to more carefully control the introduction of
the 'authenticated' group.
In particular, in the 'service_named_pipe' protocol, we do not have
control over the addition of the authenticated users group, so we key
of 'is this user the anonymous SID'.
This also takes more care to allocate the right length ptoken->sids
Andrew Bartlett
The auth context was in the past only for NTLM authentication, but we
need a SAM, an event context and and loadparm context for calculating
the local groups too, so re-use that infrustructure we already have in
place.
However, to avoid problems where we may not have an auth_context (in
torture tests, for example), allow a simpler 'session_info' to be
generated, by passing this via an indirection in gensec and an
generate_session_info() function pointer in the struct auth_context.
In the smb_server (for old-style session setups) we need to change the
async context to a new 'struct sesssetup_context'. This allows us to
use the auth_context in processing the authentication reply .
Andrew Bartlett
Re-using two of the create_options bits was bound to eventually
cause problems, and indeed, Windows7 now uses one of those bits
when opening text files.
Fixes bug 7189
In order to implement root_fid in the s4 SMB server we need to declare
it as a handle type, just as for other fnum values in SMB. This
required some extensive (but simple) changes in many bits of code.
see bug #6610
The MacOSX SMB client sets the BCC value in SMBwriteX calls to zero
instead of the correct size. Checking against WindowsXP, I've found
that Windows uses the maximum of the computed buffer size and the
given BCC value. I've changed Samba4 to do the same to allow MacOSX to
work.
I've limited this change to non-chained packets to ensure we don't get
the possibility of exploits based on overlapping chained requests
This change brings ntvfs_connect into compliance with other ntvfs functions
which take an ntvfs module, an ntvfs request and an smb io union.
It now becomes the responsibility of ntvfs modules to examine
tcon->generic.level themselves and derive the share name and any other
options
directly; e.g.
const char *sharename;
switch (tcon->generic.level) {
case RAW_TCON_TCON:
sharename = tcon->tcon.in.service;
break;
case RAW_TCON_TCONX:
sharename = tcon->tconx.in.path;
break;
case RAW_TCON_SMB2:
default:
return NT_STATUS_INVALID_LEVEL;
}
if (strncmp(sharename, "\\\\", 2) == 0) {
char *p = strchr(sharename+2, '\\');
if (p) {
sharename = p + 1;
}
}
service.c smbsrv_tcon_backend() is called before ntvfs_connect and fills in
some of the tcon->..out values.
For the case of RAW_TCON_TCONX, it filles out tcon->tconx.out.tid and
tcon->tconx.out.options
For the case of RAW_TCON_TCON it fills out tcon->tcon.out.tid and
tcon->tcon.out.max_xmit
Thus the ntvfs_connect function for vfs modules may override these values
if desired, but are not required to.
ntvfs_connect functions are required to fill in the tcon->tconx.out.*_type
fields, for RAW_TCON_TCONX, perhaps something like:
if (tcon->generic.level == RAW_TCON_TCONX) {
tcon->tconx.out.fs_type = ntvfs->ctx->fs_type;
tcon->tconx.out.dev_type = ntvfs->ctx->dev_type;
}
Signed-off-by: Sam Liddicott <sam@liddicott.com>
(I fixed the ntvfs_connect() in the smb_server/smb2/
and the RAW_TCON_SMB2 switch case in the modules)
Signed-off-by: Stefan Metzmacher <metze@samba.org>
smbsrv_tcon_backend no longer creates the ntvfs_request wrapper,
so smbsrv_reply_tcon* can now do this and then invoke ntvfs_connect
in the typical manner using SMBSRV_SETUP_NTVFS_REQUEST and
SMBSRV_CALL_NTVFS_BACKEND
Previously smbsrv_tcon_backend has been responsible for instantiating
the ntvfs_module_context to service a tree-connect request, and
then create an ntvfs_request wrapper around the smbsrv_request
and pass this to ntvfs_connect for the newly created ntvfs.
These actions could not be invoked asynchronously.
This meant that any client requests made while instantiating the
ntvfs module, including any composite's used during authentication
(or related client connections for the case of proxy modules)
would block other ntvfs modules and requests in the current process as
they executed a nested event loop to await completion.
Signed-off-by: Sam Liddicott <sam@liddicott.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
When starting GENSEC on the server, the auth subsystem context must be
passed in, which now includes function pointers to the key elements.
This should (when the other dependencies are fixed up) allow GENSEC to
exist as a client or server library without bundling in too much of
our server code.
Andrew Bartlett
This was found during testing at the CIFS plugfest.
No other client seems to honour or use this bit, but it is quite
ligitimately required by the spec.
Andrew Bartlett
(this does not change the file server role, and only really changes
what 'server signing = auto' means)
Optional signing really isn't any benifit to network security.
In doing so, allow anonymous clients (if permitted by policy) to log
in without signing, as Samba3 does not sign these connections (which
would use an all-zero key, so pointless).
Andrew Bartlett
(This used to be commit 468bf839c5)
We need to use smbsrv_setup_secondary_request(req) to send the
trans ack, because smbsrv_send_reply(req) destroys 'req'
and the partial trans list had dead elements in the list.
Also make sure the partial list element is removed by a talloc
destructor.
metze
(This used to be commit 221f4d6e53)
If smb_messages flags show for which opcodes VWV(0)
signifies chaining modes, and also which opcodes can
have requests >64K then the bcc / req->in.data_size
fixup in smbsrv_recv_smb_request can be more safely
applied.
This fix permits nttrans requests >64K to be handled.
It is not yet clear if THAT is a good thing, but this
fix does the current thing more nicely.
(This used to be commit 8e4f16e975)
Erroneous 16bit storage for nttrans counts meant that nttrans behaved
"strangely" for sizes of over 64K
As 32 bit is used in the SMB message and specified in
http://us4.samba.org/samba/ftp/specs/draft-leach-cifs-v1-spec-02.txt
section 3.13.2
this fix changes storage to match.
Signed-off-by: Amin Azez <azez@ufomechanic.net>
(This used to be commit d66b6c3823)
Note that we don't use any protocol specific values here.
For now only NTVFS_CLIENT_CAP_LEVEL_II_OPLOCKS is defined
others should be defined, when we find out that the ntvfs
layer needs to know about it.
metze
(This used to be commit cc42cd5f67)
We needed a flag in bufinfo to mark packets as SMB2, as it seems that
SMB2 uses a different format for the RenameInformation buffer than SMB
does
Also handle the fact that SMB2 clients give the full path to the
target file in the rename, not a relative path
(This used to be commit 52d7972d95)
This converts our SMB and SMB2 code to use a common structure "struct
request_bufinfo" for information on the buffer bounds of a packet,
alignment information and string handling. This allows us to use a
common backend for SMB and SMB2 code, while still using all the same
string and blob handling functions.
Up to now we had been passing a NULL req handle into these common
routines from the SMB2 side of the server, which meant that we failed
any operation which did a bounds checked string extraction (such as a
RenameInformation setinfo call, which is what Vista uses for renaming
files)
There is still some more work to be done on this - for example we can
now remove many of the SMB2 specific buffer handling functions that we
had, and use the SMB ones.
(This used to be commit ca6d9be6cb)
