IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Set SOCKET_CLOEXEC on the sockets returned by accept. This ensures that
the socket is unavailable to any child process created by system().
Making it harder for malicious code to set up a command channel,
as seen in the exploit for CVE-2015-0240
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Puran Chand <pchand@vmware.com>
Reviewed-by: Garming Sam <garming@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sun Dec 10 04:56:23 CET 2017 on sn-devel-144
Reparse point symlinks can now be queried over SMB1 and SMB2 from smbclient.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13159
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Böhme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Wed Dec 6 19:05:34 CET 2017 on sn-devel-144
Attempt re-open with FILE_OPEN_REPARSE_POINT. This matches the SMB1
behavior for smbclient.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13159
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Böhme <slow@samba.org>
Reparse point symlinks can now be created over SMB1 and SMB2 from
smbclient.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13159
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Böhme <slow@samba.org>
Move cli_smb1_close_done() next to its caller. This is SMB1 specific.
Prepare to wrap cli_close_send/cli_close_recv to handle SMB2.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13159
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Böhme <slow@samba.org>
This happened as smbd doesn't support reparse points so we couldn't test.
This was the reverse of the (tested) symlink parameters in the unix extensions
symlink command.
Rename parameters to link_target instead of oldname so this is clearer.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13172
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
Stops us from mixing up the old and new names. Only behavior change
is correcting the names printed in the error messages.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13172
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Volker Lendecke <vl@samba.org>
cli_smb2_close_fnum_recv() uses tevent_req_simple_recv_ntstatus(req), which
frees req, then uses the state pointer which was owned by req.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13171
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Böhme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Nov 30 05:47:12 CET 2017 on sn-devel-144
Passing a whole DATA_BLOB is cheap enough to simplify the callers: A caller
does not have to create a separate variable.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
The pygpo code calls these functions but there was not stackframe set up so
tallos_tos() fails.
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: David Mulder <dmulder@suse.com>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Remove the sock_exec code which is no longer needed and additionally has been
used by exploit code.
This was originally test support code, the tests relying on the sock_exec
code have been removed.
Past exploits have used sock_exec as a proxy for system() matching a talloc
destructor prototype.
See for example:
Exploit for Samba vulnerabilty (CVE-2015-0240) at
https://gist.github.com/worawit/051e881fc94fe4a49295
and the Red Hat post at
https://access.redhat.com/blogs/766093/posts/1976553
Signed-off-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Garming Sam <garming@catalyst.net.nz>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Mon Nov 20 07:20:13 CET 2017 on sn-devel-144
It does this if we send a session ID of zero. The server still replied.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=13007
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Nov 11 08:44:37 CET 2017 on sn-devel-144
Signed-off-by: David Mulder <dmulder@suse.com>
Reviewed-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Jim McDonough <jmcd@samba.org>
Autobuild-User(master): Jim McDonough <jmcd@samba.org>
Autobuild-Date(master): Thu Nov 9 01:49:06 CET 2017 on sn-devel-144
This widens the lock range to cover the check for established
credentials. Before this patch it could happen that more than one
winbind finds no credentials and does the auth3. This can pile up.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
This allows to check if the current cli_state uses encryption
(either via unix extentions or via SMB3).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12996
Signed-off-by: Stefan Metzmacher <metze@samba.org>
The default debug level of smbclient is set to 'log level = 1'. So we
need to use at least NOTICE to not get the message when we do not force
kerberos.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12704
Signed-off-by: Andreas Schneider <asn@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Aug 24 17:22:18 CEST 2017 on sn-devel-144
Also modify non-specified max_protocol to be PROTOCOL_LATEST
(currently PROTOCOL_SMB3_11).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12881
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This is all we can do with when using we allow SMB2/3 and the server supports
it, 'smb://' can't work unless we implement LLMNR and maybe WSD.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12876
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
get_ipc_connect() is only used in code paths that require cli_NetServerEnum()
to work, so it must already require SMB1 only.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12876
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
We have to do the parsing manually. Looking at librpc/gen_ndr/ndr_notify.c we
have the following code snippet:
size_FileName1_0 = strlen_m(r->FileName1);
NDR_CHECK(ndr_pull_charset(ndr, NDR_SCALARS, &r->FileName1,
size_FileName1_0, sizeof(uint16_t),
CH_UTF16));
which means that we take strlen_m(r->FileName1) before we pull
it off the wire. Not sure how to fix this, but that is clearly
broken pidl output. Once that is fixed, we can convert this
to ndr_pull_struct.
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
This removes duplicate code paths and ensures we have only one
function calling the underlying smb2cli_set_info() for setting
info levels by path.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12913
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Fix to prevent libsmbclient from accidently making SMB1 calls inside an SMB2
connection.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12913
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
This is only called from SMBC_setatr(), so bring it into line with
the specification for that function.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12913
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
talloc_asprintf_append() might call realloc()
and therefore move the memory address of "path".
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12927
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Böhme <slow@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Jul 22 22:45:05 CEST 2017 on sn-devel-144
SMB1 uses attr == 0 to clear all attributes
on a file (end up with FILE_ATTRIBUTE_NORMAL),
and attr == FILE_ATTRIBUTE_NORMAL to mean ignore
request attribute change.
SMB2 uses exactly the reverse. Unfortunately as the
cli_setatr() ABI is exposed inside libsmbclient,
we must make the SMB2 cli_smb2_setatr() call
export the same ABI as the SMB1 cli_setatr()
which calls it. This means reversing the sense
of the requested attr argument if it's zero
or FILE_ATTRIBUTE_NORMAL.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12899
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Richard Sharpe <realrichardsharpe@gmail.com>
We use secrets_{prepare,failed,defer,finish}_password_change() to make
the process more robust.
Even if we just just verified the current password with the DC
it can still happen that the remote password change will fail.
If a server has the RefusePasswordChange=1 under
HKLM\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters,
it will reject NetrServerPasswordSet2() with NT_STATUS_WRONG_PASSWORD.
This results in a successful local change, but a failing remote change,
which means the domain membership is broken (as we don't fallback to
the previous password for ntlmssp nor kerberos yet).
An (at least Samba) RODC will also reject a password change,
see https://bugzilla.samba.org/show_bug.cgi?id=12773.
Even with this change we still have open problems, e.g. if the password was
changed, but we didn't get the servers response. In order to fix that we need
to use only netlogon and lsa over unprotected transports, just using schannel
authentication (which supports the fallback to the old password).
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12782
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
