IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
safe for using our headers and linking with C++ modules. Stops us
from using C++ reserved keywords in our code.
Jeremy
(This used to be commit 9506b8e145)
of the response packet) was outside of the if() that determined whether
the query was successful or not. As a result, the MAC address would print
out even if there was no MAC address. At least the garbage it printed was
relatively consistent. :)
I moved the MAC printing into the if() block and added an 'else' to print
"No reply..." if the query fails.
Chris -)-----
(This used to be commit 2a5d66791f)
that is now possible to, for example, load a module which contains
an auth method into a binary without the auth/ subsystem built in.
(This used to be commit 74d9ecfe2d)
- fstring/pstring mixups
- the detection code that found them (disabled)
- a bit of whitespace
- a static
Andrew Bartlett
(This used to be commit 9b70fa868e)
in smbd/process.c where the timezone is reinitialised. Was replaced with
check for a static is_initialised boolean.
(This used to be commit 8fc772c9e5)
Function name_status_query() performs a node status query, so it really
should be called "node_status_query()" just to be consistent.
Yeah, minor... but it's looking as though an overhaul of namequery.c is in
order and I am trying to do the tiny changes that impact other stuff first.
Chris -)-----
(This used to be commit 3af2de7ed2)
This commit gets rid of all our old codepage handling and replaces it with
iconv. All internal strings in Samba are now in "unix" charset, which may
be multi-byte. See internals.doc and my posting to samba-technical for
a more complete explanation.
(This used to be commit debb471267)
smbd/sec_ctx.c: Fixed potential memory leak spotted by
Kenichi Okuyama@Tokyo Research Lab, IBM-Japan, Co.
utils/nmblookup.c: gcc warning on Solaris fix.
Jeremy.
(This used to be commit 1be60597cd)
list of structures rather than the dodgy parsing code we had before
this also gets smbw working correctly with no initial workgroup (using
name_status_find on __MSBROWSE__ returns)
(This used to be commit f2be88a873)
to open_socket_in() from within the open_sockets() function. This has some
effect on the way port numbers are assigned. Basically, if we use the -r
switch we are saying 'use port 137'. If we can't do that, there should
be an error message and a failure. If we don't use -r then we simply select
the first available port. The way it was working, if we selected -r and
port 137 was in use, wierd things would happen as open_socket_in() tried to
find another port.
(This used to be commit f09cb41ad8)
registered within the search space, nmblookup would report
name_query failed to find name ZOOB
I've changed it to report any non-zero type, so the above message becomes
name_query failed to find name ZOOB#1B
If the query is for ZOOB or even ZOOB#00 then the old style error message
is given.
Chris -)-----
(This used to be commit 5ecf0c6171)
This fixes our netbios scope handling. We now have a 'netbios scope' option
in smb.conf and the scope option is removed from make_nmb_name()
this was prompted by a bug in our PDC finding code where it didn't append
the scope to the query of the '*' name.
(This used to be commit b563be824b)
this means "nmblookup -S" now always works, even with broken servers
the database stores all unexpected replies and these can be accessed
by any client.
while doing this I cleaned up a couple of functions, and put in place
a better trn_id generator. in most places the code got quite a bit
simpler due to the addition of simple helper functions.
I haven't yet put the code in to take advantage of this for pdc
replies - that will be next. Jeremys pdc finding code will then work :)
(This used to be commit 280e6359d3)
created an "nmb-agent" utility that, yes: it connects to the 137 socket
and accepts unix socket connections which it redirects onto port 137.
it uses the name_trn_id field to filter requests to the correct
location.
name_query() and name_status() are the first victims to use this
feature (by specifying a file descriptor of -1).
(This used to be commit d923bc8da2)
Added quotas patch for autoconf from Dejan Ilic <svedja@lysator.liu.se>.
printing/printing.c: Filenames with spaces patch from Allan Bjorklund <allan@umich.edu>
utils/nmblookup.c: Fix usage() function.
smbd/reply.c: Split out the security=server and security=domain checks into
check_server_security() and check_domain_security() to aid the
writing of the 'hack' appliance mode invented by John Schimmel.
Jeremy.
(This used to be commit f09ab9b522)
Changes to get Samba to compile cleanly with the IRIX compiler
with the options : -fullwarn -woff 1209,1174 (the -woff options
are to turn off warnings about unused function parameters and
controlling loop expressions being constants).
Split prototype generation as we hit a limit in IRIX nawk.
Removed "." code in smbd/filename.c (yet again :-).
Jeremy.
(This used to be commit e0567433bd)
It removed all ocurrences of the following functions :
sprintf
strcpy
strcat
The replacements are slprintf, safe_strcpy and safe_strcat.
It should not be possible to use code in Samba that uses
sprintf, strcpy or strcat, only the safe_equivalents.
Once Andrew has fixed the slprintf implementation then
this code will be moved back to the 1.9.18 code stream.
Jeremy.
(This used to be commit 2d77445400)
testparm.
In particular I added:
- ability to optionally save default values of all parameters when
calling lp_load(). This can then be used to save only non-default
parameters in lp_dump(). This makes the saved smb.conf (and viewed
parameters in testparm) much shorter
- ability to not load ipc share in lp_load()
- separators in parm_table[] so parameters can be grouped logically.
- flag to mark parameters that are local but which should be also
viewed as global as far as parameters editing is concerned
(This used to be commit f9af35da26)
nmbd_sendannounce.c: Remote announcement was announcing to the wrong name !
nmblookup.c: Fix for substitutions not seeing hostname.
testparm.c: Fix for substitutions not seeing hostname.
wsmbstatus.c: Fix for substitutions not seeing hostname.
util.c: Change read_udp_socket to use sockaddr_in rather than dubiously
messing around with an opaque data type (sockaddr).
Jeremy.
(This used to be commit 776ccf5c06)
This is merely updating the Copyright statements from 1997 to 1998.
It's a once a year thing :-).
NO OTHER CHANGES WERE MADE.
Jeremy.
(This used to be commit b9c1697723)
back into the main tree.
For the cvs logs of all the files starting nmbd_*.c, look
in the JRA_NMBD_REWRITE branch. That branch has now been
discontinued.
Jeremy.
(This used to be commit d80b0cb645)
I realised this afternoon just how easy it is to add this, so I
thought I'd implement it while the idea was fresh.
nmbd forks at startup and uses a pipe to talk to its child. The child
does the DNS lookups and the file descriptor of the child is added to
the main select loop.
While I was doing this I discovered a bug in nmbd that explains why
the dns proxy option has been so expensive. The DNS cache entries in
the WINS list were never being checked, which means we always did a
DNS lookup even if we have done it before and it is in cache. I'm sure
this used to work (I tested the DNS cache when I added it) so someone
broke it :-(
Anyway, the async DNS gets rid of the problem completely. I'll commit
just the fix to the DNS cache bug to the 1.9.17 tree.
You can disable async DNS by adding -DSYNC_DNS to the compile flags.
(This used to be commit 178e27de07)
smb.h: Added defines we will need for NT SMB calls.
trans2.c: Fixed SMB_QUERY_FILE_ALT_NAME_INFO return - this is only
for short name returns (and only used when you negotiate NT SMB calls
to boot !).
Jeremy (jallison@whistle.com)
(This used to be commit 53915bd160)
I've added a -r option. When specified, nmblookup will attempt to bind
to port 137. In order for this to work, the user must be root and the
port must be available (i.e., nmbd not running). If either condition is
not met, nmblookup will default to normal behavior; it will try to bind
to a free port above 7999. I also removed an artifact. The -p <port>
option was being accepted but falling through to the default, which was
the usage message. I removed "p:" from the getopt() list.
params.c:
Rewritten. The scanning is much more linear, and I found and fixed a
few bugs. I don't like the way that the scratch buffer is handled,
but I believe that it is an improvement over the previous version.
Chris -)-----
(This used to be commit 09dc951f2a)
mangle.c smb.h util.c:
Big merge to allow KANJI support to be in the main
binary without explicitly compiling with it.
locking.c: Fix for smbstatus not being able to read files.
namepacket.c: Removed unneccesary debug statement.
trans2.c: Added Luke's proposed fix (ifdefed out until further testing).
nmblookup.c: Fixed bug where query fails and status is done on bogus IP.
Jeremy (jallison@whistle.com)
(This used to be commit 9196255022)
a codepage_initialise(). Fixes problem with initialising dos map
twice.
charset.h: Changes to support charset changes.
client.c: Changes to support charset changes.
loadparm.c: follow symlinks parameter from David Clerc <David.Clerc@cui.unige.ch>
nmbd.c: Changes to support charset changes.
nmblookup.c:Changes to support charset changes.
proto.h: Changes to support charset changes.
reply.c: Don't call security=server with no user/no password guest. Fix from
Stefaan A Eeckels <Stefaan.Eeckels@ecc.lu>
server.c: follow symlinks code from David Clerc <David.Clerc@cui.unige.ch>
smbpasswd.c:Changes to support charset changes.
status.c: Changes to support charset changes.
testparm.c: Changes to support charset changes.
testprns.c: Changes to support charset changes.
uid.c: Fixed log message with no \n.
Jeremy (jallison@whistle.com)
(This used to be commit 2a28a6e5e4)
