IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
To create a client process that waits after connect(), instead of trying
to do a blocking write(), go to sleep. The parent can then kill the client
process, once testing is done.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Reviewed-by: Martin Schwenke <martin@meltin.net>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
* Restart after test since test does heavy database manipulation
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
* Have fetch_ring print PNN for clearer output and update patterns in
test script to suit
* Simplify sanity checking pattern due to less data because of
--interactive/-i option
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
* Rename to clarify purpose of test
* Simplify test info to avoid unnecessary bit-rot
* Have message_ring print PNN for clearer output and update patterns
in test script to suit.
* Drop quantitative percentage check since this is hard to predict
when under extreme load. To compensate, tighten up expectations for
the total number of messages in each direction: at least 10 messages
are required over 10 seconds.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12109
Pair-programmed-with: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Otherwise dreplsrv_op_pull_source_get_changes_trigger() could infinitely recurse.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Sat Aug 6 01:24:05 CEST 2016 on sn-devel-144
According to susv4, addr.s6_addr is a
uint8_t s6_addr[16]
which is always != 0
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Martin Schwenke <martin@meltin.net>
Please revert once the tests are fixed.
Signed-off-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Fri Aug 5 22:17:03 CEST 2016 on sn-devel-144
Signed-off-by: Michael Adam <obnox@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Michael Adam <obnox@samba.org>
Autobuild-Date(master): Thu Aug 4 22:08:35 CEST 2016 on sn-devel-144
- "ldap ssl" does not accept the value "yes"
- Replaced "start_tls" with "start tls".
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12023
Signed-off-by: Marc Muehlfeld <mmuehlfeld@samba.org>
Reviewed-by: Andreas Schneider <asn@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12108
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
We need to skip the samba-o3 target on older systems like sn-devel-104.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12108
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12108
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
This allows us to generate better assert messages and give the
developer some ideas why the command wasn't able to run.
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12108
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Allow callers to pass in socket fds that where already passed to an
earlier call of async_connect_send(). Callers expect this behaviour and
it was working until 05d4dbda83 broke it.
The proper fix would be to change callers to close the fd and start from
scratch with a fresh socket.
Bug: https://bugzilla.samba.org/show_bug.cgi?id=12105
Signed-off-by: Ralph Boehme <slow@samba.org>
Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Thu Aug 4 05:03:21 CEST 2016 on sn-devel-144
This is from cea4a4b9b2 and
613d085a63ee554084cb99d2150921dd108f6b77
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12107
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Wed Aug 3 21:43:21 CEST 2016 on sn-devel-144
The use of the wrong key can still create structures that parse as a SID,
therefore we can sometimes get an unusual error, which becomes a flapping test
BUG: https://bugzilla.samba.org/show_bug.cgi?id=12107
Signed-off-by: Andrew Bartlett <abartlet@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
On a busy system the backgrounded counter reset can survive into the
next test and interfere with its result.
To avoid this, wait until all forks of 01.reclock exit before
continuing on to the next test.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Volker Lendecke <vl@samba.org>
Autobuild-User(master): Volker Lendecke <vl@samba.org>
Autobuild-Date(master): Mon Aug 1 17:53:27 CEST 2016 on sn-devel-144
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Thu Jul 28 13:51:06 CEST 2016 on sn-devel-144
Memory was freed in most of the failure cases. It is always better
to free the memory at the end of the function so that all exit path
of the function will free the memory. Otherwise chances are that
you might miss some cleanup.
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
shadow:snapprefix and shadow:delimiter are the two newly added options
in shadow copy. Update man pages explaining the two options.
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Add test case for the newly addded option shadow:snapprefix
and shadow:delimiter
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
With growing number of snapshots file-systems need some mechanism
to differentiate one set of snapshots from other, e.g. monthly, weekly,
manual, special events, etc. Therefore these file-systems provide
different ways to tag snapshots, e.g. provide a configurable way to
name snapshots, which is not just based on time. With only shadow:format
it is very difficult to filter these snapshots.
As part of this change added two new options, shadow:snapprefix and
shadow:delimiter, in shadow_copy2 config. This option will accept regular
expression (BRE) as input. With this optional parameter, one can specify a
variable prefix component for names of the snapshot directories in the
file-system. If this parameter is set, together with the shadow:format and
shadow:delimiter parameters it determines the possible names of snapshot
directories in the file-system.
e.g.
shadow:snapprefix = [a-z]*[0-9]
When this option is provided then shadow:format option should always
start with <delimiter> string. This delimiter is configurable via a new option,
i.e. shadow:delimiter. Default value for this is "_GMT",
e.g. _GMT-%Y.%m.%d-%H.%M.%S
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
Create a separate structure to store module specific information. Currently
only config values are saved. As of now there is no cleaner way to store run-time
information or other module specific information in shadow_copy2 module.
Therefore created a new structure to store all module specific information
including config.
Signed-off-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Uri Simchoni <uri@samba.org>
Reviewed-by: Michael Adam <obnox@samba.org>
