IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
setup_ctdb_base() and node_dir() duplicate the construction of
CTDB_BASE. Drop the use of node_dir() and construct the values for
CTDB_BASES by hand.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Simple test configuration is all relative to CTDB_BASE and node_dir is
redundant. Make this explicit by dropping most uses of node_dir.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Instead of using an intermediate environment variable for nodes files,
just create "node" or "nodes.<pnn>" in CTDB_BASE. This makes the
nodes file loading in fake_ctdb slightly repetitive but simplifies the
test scripts a lot. It also remove several instance of the CTDB_NODES
variable from the code base, so it is no longer found by "git grep".
Use an empty nodes file to indicate that fake_ctdbd should fail to
read it.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
setup_ctdb_base() makes this a convenient temporary directory.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Make use of variables provided by script_install_paths.sh instead of
reinventing the logic.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Create the file and then copy it to CTDB_BASE for each node.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The interface must always be specified in the public addresses file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This option adds a lot of unnecessary complexity to scripts.
Configuration should go in $CTDB_BASE, either directly or via a
symlink, so simplify by using the default location.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
On the node where the tests are run, CTDB_BASE is always set. This
applies to local daemons too. However, when tests are being run
against a real cluster, there may be a need to access configuration
files. However, CTDB_BASE will not be set in this case.
So, provide a function to get CTDB_BASE, if set, or a real cluster
node's configuration directory, if CTDB_BASE is not set.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This was added for a vendor who decided not to use it. It is almost
certainly unused by anyone. If anyone really needs it then it is in
the git history.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The previous test might have made configuration changes, so call
setup_ctdb() to cause the configuration to be rewritten. This is only
really useful in local daemons tests.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
These provide special-purpose setups for particular testcases.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use environment variables for test-only options. Don't put them in
the configuration file.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
nmap-ncat is used in some distributions to replace netcat. It has a
different meaning for these options.
We can get the same effect as the current combination of -d and -w by
piping a sleep process to nc. Subsequent use of $! works because it
gets the last process in pipeline.
Note that redirecting from /dev/null doesn't work with some versions
of nc. They just exit when they get EOF.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Fri Mar 9 12:24:13 CET 2018 on sn-devel-144
This directory is only used by simple tests when running against local
daemons. Moving it to simple/etc-ctdb/events.d/ means that it is
automatically copied by setup_ctdb_base().
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The local daemons code puts the socket in the CTDB_BASE directory.
This means CTDB_NODES_SOCKETS can be replaced by CTDB_BASES, a list of
base directories. The fake ssh script can first determine the correct
CTDB_BASE directory and then use it to set CTDB_SOCKET and
CTDB_PIDFILE.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The comment in local.bash is incorrect. CTDB_BASE will never be set
here because this script is not run under onnode. Instead, this where
CTDB_BASE needs to be set when running against a real cluster.
For local daemons, the check for CTDB_BASE being inconsistent with
node_dir is temporary.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
This could have been done earlier but previous movement of lines out
to new functions has made the job easier.
Best viewed with show/diff -w.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Untangle a single loop into two separate, clear functions. Create a
separate, empty file for the node with no public IPs instead of
pointing the configuration at /dev/null.
Leave the indentation in setup_ctdb() in the old style to make this
commit comprehensible.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The nodes file is now in the CTDB_BASE directory so no CTDB_NODES_FILE
variable is needed.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
There is currently a directory of symlinks that are copied during test
setup. These symlinks are updated during installation so they point
to the right place when copied.
Instead, use setup_ctdb_base() during test setup.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Several test suites need the CTDB_BASE directory to contain a subset
of the regular contents of that subdirectory. In some cases there are
symbolic links in the test directory (or a subdirectory) and these
symbolic links need to be fixed at installation time.
Instead, add new function setup_ctdb_base() to set CTDB_BASE, create
the directory and populate it as specified. This relies on
script_install_paths.sh so it can copy the specified targets. It also
copies any files from the test directory's etc-ctdb/ subdirectory.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Use the default compile-time PID file.
Use a CTDB_PIDFILE environment variable when testing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Separate stopping and starting of daemons during restart
This allows actions to be taken after stopping and allows the init
testcase to be clearer about what it is doing.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Don't use the same directory as temporary databases.
Make associated test consistent.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Temporary test data should all go somewhere under TEST_VAR_DIR instead
of in the global /tmp. The existing mktemp could be changed so the
data goes into the test directory but mktemp is overkill in this case.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Drop unnecessary PATH setting in rc.local. The functions file no
longer sets PATH so setting it here is unnecessary. Fix a comment
referencing this PATH setting.
Given EVENTSCRIPTS_PATH is no longer used, use a more obvious variable
name and fail on missing stubs/ subdirectory.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The comment is incorrect. This is only set when running simple tests
on local daemons.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Using a different file each time causes the event script to believe
that the configuration has changed even though only the node states
have changed. Change this to stop the tests from doing something
unexpected.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Amazingly, the code actually works! Understanding why is homework for
real shell experts, who are not necessarily created ==!
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
The current 10 minute timeout is causing autobuild failures in some
environments.
This timeout is simply meant to stop a test run from hanging
indefinitely due to a broken test. A 1 hour timeout is better than no
timeout.
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Thu Feb 8 04:42:56 CET 2018 on sn-devel-144
This typo causes the script to be run with the default shell. If this
is not bash then the shell will fail to parse integration.bash.
This is a regression caused by commit
c607989d91. Clearly nobody has run this
test on Debian for a long time. :-(
Signed-off-by: Martin Schwenke <martin@meltin.net>
Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Amitay Isaacs <amitay@samba.org>
Autobuild-Date(master): Wed Jan 24 10:28:52 CET 2018 on sn-devel-144
