IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
authentication. This pulls the creating of the keytab back to the
credentials code, and removes the special case of 'use keberos keytab
= yes' for now.
This allows (and requires) the callers to specify the credentials for
the server credentails to GENSEC. This allows kpasswdd (soon to be
added) to use a different set of kerberos credentials.
The 'use kerberos keytab' code will be moved into the credentials
layer, as the layers below now expect a keytab.
We also now allow for the old secret to be stored into the
credentials, allowing service password changes.
Andrew Bartlett
(This used to be commit 205f77c579)
function interface used in the credentials code.
Fix bug in ntlm_auth, where we would overwrite the PW specified as a
first input. (Reported and chased by Kai Blin <blin@gmx.net>, bug
#3040)
Andrew Bartlett
(This used to be commit 04af95bd31)
Kerberos CCACHE into the system.
This again allows the use of the system ccache when no username is
specified, and brings more code in common between gensec_krb5 and
gensec_gssapi.
It also has a side-effect that may (or may not) be expected: If there
is a ccache, even if it is not used (perhaps the remote server didn't
want kerberos), it will change the default username.
Andrew Bartlett
(This used to be commit 6202267f6e)
the ndr_pull/push/print functions for it in the ntacl-lsm module
- fix compiler warnings in the ldap_encode_ndr_* code
metze
(This used to be commit 83d65d0d7e)
event_context for the socket_connect() call, so that when things that
use dcerpc are running alongside anything else it doesn't block the
whole process during a connect.
Then of course I needed to change any code that created a dcerpc
connection (such as the auth code) to also take an event context, and
anything that called that and so on .... thus the size of the patch.
There were 3 places where I punted:
- abartlet wanted me to add a gensec_set_event_context() call
instead of adding it to the gensec init calls. Andrew, my
apologies for not doing this. I didn't do it as adding a new
parameter allowed me to catch all the callers with the
compiler. Now that its done, we could go back and use
gensec_set_event_context()
- the ejs code calls auth initialisation, which means it should pass
in the event context from the web server. I punted on that. Needs fixing.
- I used a NULL event context in dcom_get_pipe(). This is equivalent
to what we did already, but should be fixed to use a callers event
context. Jelmer, can you think of a clean way to do that?
I also cleaned up a couple of things:
- libnet_context_destroy() makes no sense. I removed it.
- removed some unused vars in various places
(This used to be commit 3a3025485b)
There is now a new --debug-stderr option to enable debug to STDERR.
popt isn't perfect, but the callbacks are used in all the main Samba
binaries, and should be used in the rest. This avoids duplicated
code, and ensures every binary is setup correctly.
This also ensures the setup happens early enough to have -s function,
and have a correct impact on the credentials code. (Fixing a bug that
frustrated tridge earlier today).
The only 'subtle' aspect of all this is that I'm pretty sure that the
SAMBA_COMMON popt code must be above the CREDENTIALS code, in the
popt tables.
Andrew Bartlett
(This used to be commit 50f3c2b3a2)
GENSEC, and to pull SCHANNEL into GENSEC, by making it less 'special'.
GENSEC now no longer has it's own handling of 'set username' etc,
instead it uses cli_credentials calls.
In order to link the credentails code right though Samba, a lot of
interfaces have changed to remove 'username, domain, password'
arguments, and these have been replaced with a single 'struct
cli_credentials'.
In the session setup code, a new parameter 'workgroup' contains the
client/server current workgroup, which seems unrelated to the
authentication exchange (it was being filled in from the auth info).
This allows in particular kerberos to only call back for passwords
when it actually needs to perform the kinit.
The kerberos code has been modified not to use the SPNEGO provided
'principal name' (in the mechListMIC), but to instead use the name the
host was connected to as. This better matches Microsoft behaviour,
is more secure and allows better use of standard kerberos functions.
To achieve this, I made changes to our socket code so that the
hostname (before name resolution) is now recorded on the socket.
In schannel, most of the code from librpc/rpc/dcerpc_schannel.c is now
in libcli/auth/schannel.c, and it looks much more like a standard
GENSEC module. The actual sign/seal code moved to
libcli/auth/schannel_sign.c in a previous commit.
The schannel credentails structure is now merged with the rest of the
credentails, as many of the values (username, workstation, domain)
where already present there. This makes handling this in a generic
manner much easier, as there is no longer a custom entry-point.
The auth_domain module continues to be developed, but is now just as
functional as auth_winbind. The changes here are consequential to the
schannel changes.
The only removed function at this point is the RPC-LOGIN test
(simulating the load of a WinXP login), which needs much more work to
clean it up (it contains copies of too much code from all over the
torture suite, and I havn't been able to penetrate its 'structure').
Andrew Bartlett
(This used to be commit 2301a4b38a)
I wanted to add a simple 'workstation' argument to the DCERPC
authenticated binding calls, but this patch kind of grew from there.
With SCHANNEL, the 'workstation' name (the netbios name of the client)
matters, as this is what ties the session between the NETLOGON ops and
the SCHANNEL bind. This changes a lot of files, and these will again
be changed when jelmer does the credentials work.
I also correct some schannel IDL to distinguish between workstation
names and account names. The distinction matters for domain trust
accounts.
Issues in handling this (issues with lifetime of talloc pointers)
caused me to change the 'creds_CredentialsState' and 'struct
dcerpc_binding' pointers to always be talloc()ed pointers.
In the schannel DB, we now store both the domain and computername, and
query on both. This should ensure we fault correctly when the domain
is specified incorrectly in the SCHANNEL bind.
In the RPC-SCHANNEL test, I finally fixed a bug that vl pointed out,
where the comment claimed we re-used a connection, but in fact we made
a new connection.
This was achived by breaking apart some of the
dcerpc_secondary_connection() logic.
The addition of workstation handling was also propogated to NTLMSSP
and GENSEC, for completeness.
The RPC-SAMSYNC test has been cleaned up a little, using a loop over
usernames/passwords rather than manually expanded tests. This will be
expanded further (the code in #if 0 in this patch) to use a newly
created user account for testing.
In making this test pass test_rpc.sh, I found a bug in the RPC-ECHO
server, caused by the removal of [ref] and the assoicated pointer from
the IDL. This has been re-added, until the underlying pidl issues are
solved.
(This used to be commit 824289dcc2)
less likely that anyone will use pstring for new code
- got rid of winbind_client.h from includes.h. This one triggered a
huge change, as winbind_client.h was including system/filesys.h and
defining the old uint32 and uint16 types, as well as its own
pstring and fstring.
(This used to be commit 9db6c79e90)
use function pointers anymore
- make the module init much easier
- a lot of cleanups
don't try to read the diff in auth/ better read the new files
it passes test_echo.sh and test_rpc.sh
abartlet: please fix spelling fixes
metze
(This used to be commit 3c0d16b823)
this is mostly just a tidyup, but also adds the privilege_mask, which
I will be using shortly in ACL checking.
note that I had to move the definition of struct security_token out of
security.idl as pidl doesn't yet handle arrays of pointers, and the
usual workaround (to use a intermediate structure) would make things
too cumbersome for this structure, especially given we never encode it
to NDR.
(This used to be commit 7b446af09b)
parsing, so that module init can take account of lp_ parms (thats
why gensec:krb5=no wasn't working)
- added a BASE-DISCONNECT torture test that tests server response to
clients disconnecting with open lock and open requests pending
(This used to be commit 5205f598b8)
Both subsystems and modules can now have init functions, which can be
specified in .mk files (INIT_FUNCTION = ...)
The build system will define :
- SUBSYSTEM_init_static_modules that calls the init functions of all statically compiled modules. Failing to load will generate an error which is not fatal
- BINARY_init_subsystems that calls the init functions (if defined) for the subsystems the binary depends on
This removes the hack with the "static bool Initialised = " and the
"lazy_init" functions
(This used to be commit 7a8244761b)
(user groups). The form of this is not final, but is this should be a
discussion point with the squid team.
Andrew Bartlett
(This used to be commit cbb0c67d06)
multiplexed helper system.
This system prefixes every request with a number, and we maintian a
state machine for each of these integers. This means that we can have
multiple outstanding challenges, without the overhead of a whole
ntlm_auth process.
In future, the actual password check will also be async.
Andrew Bartlett
(This used to be commit 9ea34abce3)
this brings us down to about 11k lines of headers included with
includes.h, while still retaining the speed of building with pch
(This used to be commit 10188869ef)
- tidied up some of the system includes
- moved a few more structures back from misc.idl to netlogon.idl and samr.idl now that pidl
knows about inter-IDL dependencies
(This used to be commit 7b7477ac42)
by making our gensec structures a talloc child of the open connection
we can be sure that it will be destroyed when the connection is
dropped.
(This used to be commit f12ee2f241)
This implements gensec for Samba's server side, and brings gensec up
to the standards of a full subsystem.
This means that use of the subsystem is by gensec_* functions, not
function pointers in structures (this is internal). This causes
changes in all the existing gensec users.
Our RPC server no longer contains it's own generalised security
scheme, and now calls gensec directly.
Gensec has also taken over the role of auth/auth_ntlmssp.c
An important part of gensec, is the output of the 'session_info'
struct. This is now reference counted, so that we can correctly free
it when a pipe is closed, no matter if it was inherited, or created by
per-pipe authentication.
The schannel code is reworked, to be in the same file for client and
server.
ntlm_auth is reworked to use gensec.
The major problem with this code is the way it relies on subsystem
auto-initialisation. The primary reason for this commit now.is to
allow these problems to be looked at, and fixed.
There are problems with the new code:
- I've tested it with smbtorture, but currently don't have VMware and
valgrind working (this I'll fix soon).
- The SPNEGO code is client-only at this point.
- We still do not do kerberos.
Andrew Bartlett
(This used to be commit 07fd885fd4)
This layer is used for DCERPC security, as well as ntlm_auth at this
time. It expect things like SASL and the CIFS layer to use it as
well.
The particular purpose of this layer is to introduce SPENGO, which
needs generic access to the actual implementation mechanisms.
Schannel, due to it's 'interesting' setup properties is in GENSEC, but
is only in the RPC code.
Andrew Bartlett
(This used to be commit 902af49006)
I have moved the SPNEGO and Kerberos code into libcli/auth, and intend
to refactor them into the same format as NTLMSSP.
Andrew Bartlett
(This used to be commit 58da78a746)
