IF YOU WOULD LIKE TO GET AN ACCOUNT, please write an
email to Administrator. User accounts are meant only to access repo
and report issues and/or generate pull requests.
This is a purpose-specific Git hosting for
BaseALT
projects. Thank you for your understanding!
Только зарегистрированные пользователи имеют доступ к сервису!
Для получения аккаунта, обратитесь к администратору.
Solaris has no err.h, so use CCAN replacement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User(master): Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date(master): Sat Jun 9 12:07:15 CEST 2012 on sn-devel-104
From: Andrew Bartlett <abartlet@samba.org>
This code is incredibly useful, but is only needed in test code and may not be
perfectly portable. It has compiled on all systems bar Solaris so far, but
rather than make it a requirement to build Samba, just keep it for development.
Andrew Bartlett
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User(master): Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date(master): Thu Jun 7 18:53:12 CEST 2012 on sn-devel-104
They weren't being built when we were at top-level, because the globs
were wrong. Just open-code the test names, which always works.
Reported-by: Andrew Bartlett
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were handing an int-returning function where we should hand an enum TDB_ERROR
returning function. Worse, it was returning 0/-1 instead of 0/TDB_ERR_*.
Fortunately, it's only compared against success, but the Solaris compiler
warns about it, and it's not correct anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use tdb_mkdata() to get rid of many of them from the tests, and
explicit cast_const() in a few places.
tlist_for_each() still causes a warning, but that needs to be fixed in
CCAN.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Thu Mar 22 03:29:32 CET 2012 on sn-devel-104
This handles incoherent mmaps for TDB2 native databases, by forcing
mmap on for such systems, just like we did for tdb1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Another PPC issue (endian?) revealed that the summary code did not handle
capabilities correctly: in fact, it went into an endless loop.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Wed Mar 14 06:51:43 CET 2012 on sn-devel-104
Not used by default, since it slows down testing (on my laptop) from
22 seconds to 2 minutes 30 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Amitay Isaacs <amitay@samba.org>
Autobuild-Date: Wed Mar 7 04:57:21 CET 2012 on sn-devel-104
The tests are ccan-style, so the names tell how to link them. This
logic is generic, and could be moved to wafsamba, cleaned up, and used
elsewhere.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means changing headers, implementing a simple tap-like wrapper,
and also splitting out the helpers into those which are linked with
the api* tests (which can't use non-public tdb2 functions) and those
linked with the run* tests (which can).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The library is called tdb, so the pc file must have the same name.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Mon Feb 27 06:59:58 CET 2012 on sn-devel-104
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Tue Feb 21 07:43:55 CET 2012 on sn-devel-104
Adds a Makefile, configure script, and tdb2.pc.in.
Signed-off-by: Amitay Isaacs <amitay@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Like tdb1, it's the caller's responsibility to set up various config
options (eg. by #include "config.h") before including the public
header.
We use HAVE_CCAN for including the (private) CCAN headers, otherwise
dummy macros are used.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The tdb2 tools should #include "config.h" before tdb2.h (about to
become a requirement) and use libreplace where available.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I thought you could --disable-tdb2=false, apparently not! Thanks
Michael Adam...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Thu Feb 2 03:43:08 CET 2012 on sn-devel-104
We still use the tdb1 on-disk format, but we do so via the tdb2 library.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Mon Jan 30 08:02:43 CET 2012 on sn-devel-104
TDB2 uses the same expansion logic as TDB1, which got factored out
recently. So update TDB2 to match.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit c438ec17d7b2efe76e56e5fc5ab88bd4a02735e8)
It's much harder to wrap a 64-bit tdb2 than a 32-bit tdb1, but we should still
take care against bugs.
Also, we should *not* cast the length to a size_t when comparing it to
the stat result, in case size_t is 32 bit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit 6f7cb26e589cea081e71c59801eae87178967861)
With the type canary, it's unnecessary. Though the implementation is
a bit more awkward since they longer map directly through to list_top/tail.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit a6b5111fe6948e51114c33aa34785c9fd0d403e6)
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Mon Dec 5 12:13:08 CET 2011 on sn-devel-104
This means we know they're there in future, and what restrictions they
carry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit b3ca95351517e76b635347b39382b059a66f8388)
This allows even more extensibility in future: in particular, the top
bits of each capability tell us what to do if we don't understand it:
fail the open, fail to open for write, or don't try to check the
format.
tdb_check needs to understand the capability list so it can know to
skip over it: each element in the list is prefixed with the type tag
and the length.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit 35f198de1851a7d57064546b7ced677b6fabee27)
This will be used shortly to indicate that a TDB2 file indicates it
cannot be checked.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit e01d795c8964b791def1e9f68c386b350b3a2a84)
Now we test failing mmap, ccanlint -v time has increased from 200 to
330 seconds. Worse, tests no time out on my laptop.
Fix this, by preventing us from going down that particular rabbit hole.
ccanlint -v now takes 201 seconds again.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit fbae37ba91ec230e34be564084099726cc3a9d47)
failtest now culls duplicates for itself (and more efficiently), so
don't replicate the logic here. It changes things a bit, because
failtest uses backtraces rather than a simple call point to find
duplicates.
Also, fix one case (in run-11-simple-fetch.c) where we simply exited
rather than using failtest_exit(). We got away with it before, because
we never hit that particular failure pattern.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit 3d99c9334fe3067c88772547b9c06acec21616ea)
This avoids a silly realloc, but more importantly it gets us closer to
being runtime extensible, as each history element can be a different
size.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit 9571a41e8494f3135557e3ec50c2de856392173e)
Less cut & paste means less patching as failtest changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit 1819a36a3e69565bd7b853503fceb846558a45bd)
layout.c's TDB creation functions were incorrect in case of a hash
collision, causing occasional failure. Make it always use the
(previously-failing) seed value, and fix it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit 60a487d57979e4364e70c837079f3cf083ddc9c7)
We currently insist that a tdb file be a version1 file if tdb_open() is
passed the TDB_VERSION1 flag; we fail if it's actually a tdb2.
But that makes generic wrappers harder, and is unlikely to be what the
user wants: if they do, they can check tdb_get_flags() & TDB_VERSION1
after opening.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit 9691464a16ef22d6acadfef209666381dfe22b2f)
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Wed Nov 2 08:38:38 CET 2011 on sn-devel-104
This is what lib/tdb2 really wants: to know if it should use normal
headers or replace.h. It currently uses _SAMBA_BUILD_, which is wrong
for ldb, for example.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Tue Nov 1 03:19:58 CET 2011 on sn-devel-104
Since we no longer break compatibility, don't scare people.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Wed Sep 21 09:25:11 CEST 2011 on sn-devel-104
This happens in SAMBA with the TDB_VERSION1, presumably due to a
read-only traverse nested inside a normal traverse (since it doesn't
occur without TDB_VERSION1).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit 24e5ddb143fb5e79112649472258f5da67cc7362)
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Tue Sep 20 09:35:10 CEST 2011 on sn-devel-104
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-User: Rusty Russell <rusty@rustcorp.com.au>
Autobuild-Date: Wed Sep 14 06:06:41 CEST 2011 on sn-devel-104
Since enums and ints are compatible in C, the compiler didn't warn
that our prototypes for these functions disagreed with the
definitions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(Imported from CCAN commit 6d3832ee613adeb9ae7ed6454996ffa39c32650f)
